test-bdrv-drain: AIO_WAIT_WHILE() in job .commit/.abort
[qemu/ar7.git] / hw / ipack / tpci200.c
blobcd3e79139d50c1445ca65622f44b5cb8268f5771
1 /*
2 * QEMU TEWS TPCI200 IndustryPack carrier emulation
4 * Copyright (C) 2012 Igalia, S.L.
5 * Author: Alberto Garcia <berto@igalia.com>
7 * This code is licensed under the GNU GPL v2 or (at your option) any
8 * later version.
9 */
11 #include "qemu/osdep.h"
12 #include "qemu/units.h"
13 #include "hw/ipack/ipack.h"
14 #include "hw/pci/pci.h"
15 #include "qemu/bitops.h"
17 /* #define DEBUG_TPCI */
19 #ifdef DEBUG_TPCI
20 #define DPRINTF(fmt, ...) \
21 do { fprintf(stderr, "TPCI200: " fmt, ## __VA_ARGS__); } while (0)
22 #else
23 #define DPRINTF(fmt, ...) do { } while (0)
24 #endif
26 #define N_MODULES 4
28 #define IP_ID_SPACE 2
29 #define IP_INT_SPACE 3
30 #define IP_IO_SPACE_ADDR_MASK 0x7F
31 #define IP_ID_SPACE_ADDR_MASK 0x3F
32 #define IP_INT_SPACE_ADDR_MASK 0x3F
34 #define STATUS_INT(IP, INTNO) BIT((IP) * 2 + (INTNO))
35 #define STATUS_TIME(IP) BIT((IP) + 12)
36 #define STATUS_ERR_ANY 0xF00
38 #define CTRL_CLKRATE BIT(0)
39 #define CTRL_RECOVER BIT(1)
40 #define CTRL_TIME_INT BIT(2)
41 #define CTRL_ERR_INT BIT(3)
42 #define CTRL_INT_EDGE(INTNO) BIT(4 + (INTNO))
43 #define CTRL_INT(INTNO) BIT(6 + (INTNO))
45 #define REG_REV_ID 0x00
46 #define REG_IP_A_CTRL 0x02
47 #define REG_IP_B_CTRL 0x04
48 #define REG_IP_C_CTRL 0x06
49 #define REG_IP_D_CTRL 0x08
50 #define REG_RESET 0x0A
51 #define REG_STATUS 0x0C
52 #define IP_N_FROM_REG(REG) ((REG) / 2 - 1)
54 typedef struct {
55 PCIDevice dev;
56 IPackBus bus;
57 MemoryRegion mmio;
58 MemoryRegion io;
59 MemoryRegion las0;
60 MemoryRegion las1;
61 MemoryRegion las2;
62 MemoryRegion las3;
63 bool big_endian[3];
64 uint8_t ctrl[N_MODULES];
65 uint16_t status;
66 uint8_t int_set;
67 } TPCI200State;
69 #define TYPE_TPCI200 "tpci200"
71 #define TPCI200(obj) \
72 OBJECT_CHECK(TPCI200State, (obj), TYPE_TPCI200)
74 static const uint8_t local_config_regs[] = {
75 0x00, 0xFF, 0xFF, 0x0F, 0x00, 0xFC, 0xFF, 0x0F, 0x00, 0x00, 0x00,
76 0x0E, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,
77 0x00, 0x08, 0x01, 0x00, 0x00, 0x04, 0x01, 0x00, 0x00, 0x00, 0x01,
78 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0xA0, 0x60, 0x41, 0xD4,
79 0xA2, 0x20, 0x41, 0x14, 0xA2, 0x20, 0x41, 0x14, 0xA2, 0x20, 0x01,
80 0x14, 0x00, 0x00, 0x00, 0x00, 0x81, 0x00, 0x00, 0x08, 0x01, 0x02,
81 0x00, 0x04, 0x01, 0x00, 0x00, 0x01, 0x01, 0x00, 0x80, 0x02, 0x41,
82 0x00, 0x00, 0x00, 0x00, 0x40, 0x7A, 0x00, 0x52, 0x92, 0x24, 0x02
85 static void adjust_addr(bool big_endian, hwaddr *addr, unsigned size)
87 /* During 8 bit access in big endian mode,
88 odd and even addresses are swapped */
89 if (big_endian && size == 1) {
90 *addr ^= 1;
94 static uint64_t adjust_value(bool big_endian, uint64_t *val, unsigned size)
96 /* Local spaces only support 8/16 bit access,
97 * so there's no need to care for sizes > 2 */
98 if (big_endian && size == 2) {
99 *val = bswap16(*val);
101 return *val;
104 static void tpci200_set_irq(void *opaque, int intno, int level)
106 IPackDevice *ip = opaque;
107 IPackBus *bus = IPACK_BUS(qdev_get_parent_bus(DEVICE(ip)));
108 PCIDevice *pcidev = PCI_DEVICE(BUS(bus)->parent);
109 TPCI200State *dev = TPCI200(pcidev);
110 unsigned ip_n = ip->slot;
111 uint16_t prev_status = dev->status;
113 assert(ip->slot >= 0 && ip->slot < N_MODULES);
115 /* The requested interrupt must be enabled in the IP CONTROL
116 * register */
117 if (!(dev->ctrl[ip_n] & CTRL_INT(intno))) {
118 return;
121 /* Update the interrupt status in the IP STATUS register */
122 if (level) {
123 dev->status |= STATUS_INT(ip_n, intno);
124 } else {
125 dev->status &= ~STATUS_INT(ip_n, intno);
128 /* Return if there are no changes */
129 if (dev->status == prev_status) {
130 return;
133 DPRINTF("IP %u INT%u#: %u\n", ip_n, intno, level);
135 /* Check if the interrupt is edge sensitive */
136 if (dev->ctrl[ip_n] & CTRL_INT_EDGE(intno)) {
137 if (level) {
138 pci_set_irq(&dev->dev, !dev->int_set);
139 pci_set_irq(&dev->dev, dev->int_set);
141 } else {
142 unsigned i, j;
143 uint16_t level_status = dev->status;
145 /* Check if there are any level sensitive interrupts set by
146 removing the ones that are edge sensitive from the status
147 register */
148 for (i = 0; i < N_MODULES; i++) {
149 for (j = 0; j < 2; j++) {
150 if (dev->ctrl[i] & CTRL_INT_EDGE(j)) {
151 level_status &= ~STATUS_INT(i, j);
156 if (level_status && !dev->int_set) {
157 pci_irq_assert(&dev->dev);
158 dev->int_set = 1;
159 } else if (!level_status && dev->int_set) {
160 pci_irq_deassert(&dev->dev);
161 dev->int_set = 0;
166 static uint64_t tpci200_read_cfg(void *opaque, hwaddr addr, unsigned size)
168 TPCI200State *s = opaque;
169 uint8_t ret = 0;
170 if (addr < ARRAY_SIZE(local_config_regs)) {
171 ret = local_config_regs[addr];
173 /* Endianness is stored in the first bit of these registers */
174 if ((addr == 0x2b && s->big_endian[0]) ||
175 (addr == 0x2f && s->big_endian[1]) ||
176 (addr == 0x33 && s->big_endian[2])) {
177 ret |= 1;
179 DPRINTF("Read from LCR 0x%x: 0x%x\n", (unsigned) addr, (unsigned) ret);
180 return ret;
183 static void tpci200_write_cfg(void *opaque, hwaddr addr, uint64_t val,
184 unsigned size)
186 TPCI200State *s = opaque;
187 /* Endianness is stored in the first bit of these registers */
188 if (addr == 0x2b || addr == 0x2f || addr == 0x33) {
189 unsigned las = (addr - 0x2b) / 4;
190 s->big_endian[las] = val & 1;
191 DPRINTF("LAS%u big endian mode: %u\n", las, (unsigned) val & 1);
192 } else {
193 DPRINTF("Write to LCR 0x%x: 0x%x\n", (unsigned) addr, (unsigned) val);
197 static uint64_t tpci200_read_las0(void *opaque, hwaddr addr, unsigned size)
199 TPCI200State *s = opaque;
200 uint64_t ret = 0;
202 switch (addr) {
204 case REG_REV_ID:
205 DPRINTF("Read REVISION ID\n"); /* Current value is 0x00 */
206 break;
208 case REG_IP_A_CTRL:
209 case REG_IP_B_CTRL:
210 case REG_IP_C_CTRL:
211 case REG_IP_D_CTRL:
213 unsigned ip_n = IP_N_FROM_REG(addr);
214 ret = s->ctrl[ip_n];
215 DPRINTF("Read IP %c CONTROL: 0x%x\n", 'A' + ip_n, (unsigned) ret);
217 break;
219 case REG_RESET:
220 DPRINTF("Read RESET\n"); /* Not implemented */
221 break;
223 case REG_STATUS:
224 ret = s->status;
225 DPRINTF("Read STATUS: 0x%x\n", (unsigned) ret);
226 break;
228 /* Reserved */
229 default:
230 DPRINTF("Unsupported read from LAS0 0x%x\n", (unsigned) addr);
231 break;
234 return adjust_value(s->big_endian[0], &ret, size);
237 static void tpci200_write_las0(void *opaque, hwaddr addr, uint64_t val,
238 unsigned size)
240 TPCI200State *s = opaque;
242 adjust_value(s->big_endian[0], &val, size);
244 switch (addr) {
246 case REG_REV_ID:
247 DPRINTF("Write Revision ID: 0x%x\n", (unsigned) val); /* No effect */
248 break;
250 case REG_IP_A_CTRL:
251 case REG_IP_B_CTRL:
252 case REG_IP_C_CTRL:
253 case REG_IP_D_CTRL:
255 unsigned ip_n = IP_N_FROM_REG(addr);
256 s->ctrl[ip_n] = val;
257 DPRINTF("Write IP %c CONTROL: 0x%x\n", 'A' + ip_n, (unsigned) val);
259 break;
261 case REG_RESET:
262 DPRINTF("Write RESET: 0x%x\n", (unsigned) val); /* Not implemented */
263 break;
265 case REG_STATUS:
267 unsigned i;
269 for (i = 0; i < N_MODULES; i++) {
270 IPackDevice *ip = ipack_device_find(&s->bus, i);
272 if (ip != NULL) {
273 if (val & STATUS_INT(i, 0)) {
274 DPRINTF("Clear IP %c INT0# status\n", 'A' + i);
275 qemu_irq_lower(ip->irq[0]);
277 if (val & STATUS_INT(i, 1)) {
278 DPRINTF("Clear IP %c INT1# status\n", 'A' + i);
279 qemu_irq_lower(ip->irq[1]);
283 if (val & STATUS_TIME(i)) {
284 DPRINTF("Clear IP %c timeout\n", 'A' + i);
285 s->status &= ~STATUS_TIME(i);
289 if (val & STATUS_ERR_ANY) {
290 DPRINTF("Unexpected write to STATUS register: 0x%x\n",
291 (unsigned) val);
294 break;
296 /* Reserved */
297 default:
298 DPRINTF("Unsupported write to LAS0 0x%x: 0x%x\n",
299 (unsigned) addr, (unsigned) val);
300 break;
304 static uint64_t tpci200_read_las1(void *opaque, hwaddr addr, unsigned size)
306 TPCI200State *s = opaque;
307 IPackDevice *ip;
308 uint64_t ret = 0;
309 unsigned ip_n, space;
310 uint8_t offset;
312 adjust_addr(s->big_endian[1], &addr, size);
315 * The address is divided into the IP module number (0-4), the IP
316 * address space (I/O, ID, INT) and the offset within that space.
318 ip_n = addr >> 8;
319 space = (addr >> 6) & 3;
320 ip = ipack_device_find(&s->bus, ip_n);
322 if (ip == NULL) {
323 DPRINTF("Read LAS1: IP module %u not installed\n", ip_n);
324 } else {
325 IPackDeviceClass *k = IPACK_DEVICE_GET_CLASS(ip);
326 switch (space) {
328 case IP_ID_SPACE:
329 offset = addr & IP_ID_SPACE_ADDR_MASK;
330 if (k->id_read) {
331 ret = k->id_read(ip, offset);
333 break;
335 case IP_INT_SPACE:
336 offset = addr & IP_INT_SPACE_ADDR_MASK;
338 /* Read address 0 to ACK IP INT0# and address 2 to ACK IP INT1# */
339 if (offset == 0 || offset == 2) {
340 unsigned intno = offset / 2;
341 bool int_set = s->status & STATUS_INT(ip_n, intno);
342 bool int_edge_sensitive = s->ctrl[ip_n] & CTRL_INT_EDGE(intno);
343 if (int_set && !int_edge_sensitive) {
344 qemu_irq_lower(ip->irq[intno]);
348 if (k->int_read) {
349 ret = k->int_read(ip, offset);
351 break;
353 default:
354 offset = addr & IP_IO_SPACE_ADDR_MASK;
355 if (k->io_read) {
356 ret = k->io_read(ip, offset);
358 break;
362 return adjust_value(s->big_endian[1], &ret, size);
365 static void tpci200_write_las1(void *opaque, hwaddr addr, uint64_t val,
366 unsigned size)
368 TPCI200State *s = opaque;
369 IPackDevice *ip;
370 unsigned ip_n, space;
371 uint8_t offset;
373 adjust_addr(s->big_endian[1], &addr, size);
374 adjust_value(s->big_endian[1], &val, size);
377 * The address is divided into the IP module number, the IP
378 * address space (I/O, ID, INT) and the offset within that space.
380 ip_n = addr >> 8;
381 space = (addr >> 6) & 3;
382 ip = ipack_device_find(&s->bus, ip_n);
384 if (ip == NULL) {
385 DPRINTF("Write LAS1: IP module %u not installed\n", ip_n);
386 } else {
387 IPackDeviceClass *k = IPACK_DEVICE_GET_CLASS(ip);
388 switch (space) {
390 case IP_ID_SPACE:
391 offset = addr & IP_ID_SPACE_ADDR_MASK;
392 if (k->id_write) {
393 k->id_write(ip, offset, val);
395 break;
397 case IP_INT_SPACE:
398 offset = addr & IP_INT_SPACE_ADDR_MASK;
399 if (k->int_write) {
400 k->int_write(ip, offset, val);
402 break;
404 default:
405 offset = addr & IP_IO_SPACE_ADDR_MASK;
406 if (k->io_write) {
407 k->io_write(ip, offset, val);
409 break;
414 static uint64_t tpci200_read_las2(void *opaque, hwaddr addr, unsigned size)
416 TPCI200State *s = opaque;
417 IPackDevice *ip;
418 uint64_t ret = 0;
419 unsigned ip_n;
420 uint32_t offset;
422 adjust_addr(s->big_endian[2], &addr, size);
425 * The address is divided into the IP module number and the offset
426 * within the IP module MEM space.
428 ip_n = addr >> 23;
429 offset = addr & 0x7fffff;
430 ip = ipack_device_find(&s->bus, ip_n);
432 if (ip == NULL) {
433 DPRINTF("Read LAS2: IP module %u not installed\n", ip_n);
434 } else {
435 IPackDeviceClass *k = IPACK_DEVICE_GET_CLASS(ip);
436 if (k->mem_read16) {
437 ret = k->mem_read16(ip, offset);
441 return adjust_value(s->big_endian[2], &ret, size);
444 static void tpci200_write_las2(void *opaque, hwaddr addr, uint64_t val,
445 unsigned size)
447 TPCI200State *s = opaque;
448 IPackDevice *ip;
449 unsigned ip_n;
450 uint32_t offset;
452 adjust_addr(s->big_endian[2], &addr, size);
453 adjust_value(s->big_endian[2], &val, size);
456 * The address is divided into the IP module number and the offset
457 * within the IP module MEM space.
459 ip_n = addr >> 23;
460 offset = addr & 0x7fffff;
461 ip = ipack_device_find(&s->bus, ip_n);
463 if (ip == NULL) {
464 DPRINTF("Write LAS2: IP module %u not installed\n", ip_n);
465 } else {
466 IPackDeviceClass *k = IPACK_DEVICE_GET_CLASS(ip);
467 if (k->mem_write16) {
468 k->mem_write16(ip, offset, val);
473 static uint64_t tpci200_read_las3(void *opaque, hwaddr addr, unsigned size)
475 TPCI200State *s = opaque;
476 IPackDevice *ip;
477 uint64_t ret = 0;
479 * The address is divided into the IP module number and the offset
480 * within the IP module MEM space.
482 unsigned ip_n = addr >> 22;
483 uint32_t offset = addr & 0x3fffff;
485 ip = ipack_device_find(&s->bus, ip_n);
487 if (ip == NULL) {
488 DPRINTF("Read LAS3: IP module %u not installed\n", ip_n);
489 } else {
490 IPackDeviceClass *k = IPACK_DEVICE_GET_CLASS(ip);
491 if (k->mem_read8) {
492 ret = k->mem_read8(ip, offset);
496 return ret;
499 static void tpci200_write_las3(void *opaque, hwaddr addr, uint64_t val,
500 unsigned size)
502 TPCI200State *s = opaque;
503 IPackDevice *ip;
505 * The address is divided into the IP module number and the offset
506 * within the IP module MEM space.
508 unsigned ip_n = addr >> 22;
509 uint32_t offset = addr & 0x3fffff;
511 ip = ipack_device_find(&s->bus, ip_n);
513 if (ip == NULL) {
514 DPRINTF("Write LAS3: IP module %u not installed\n", ip_n);
515 } else {
516 IPackDeviceClass *k = IPACK_DEVICE_GET_CLASS(ip);
517 if (k->mem_write8) {
518 k->mem_write8(ip, offset, val);
523 static const MemoryRegionOps tpci200_cfg_ops = {
524 .read = tpci200_read_cfg,
525 .write = tpci200_write_cfg,
526 .endianness = DEVICE_NATIVE_ENDIAN,
527 .valid = {
528 .min_access_size = 1,
529 .max_access_size = 4
531 .impl = {
532 .min_access_size = 1,
533 .max_access_size = 1
537 static const MemoryRegionOps tpci200_las0_ops = {
538 .read = tpci200_read_las0,
539 .write = tpci200_write_las0,
540 .endianness = DEVICE_NATIVE_ENDIAN,
541 .valid = {
542 .min_access_size = 2,
543 .max_access_size = 2
547 static const MemoryRegionOps tpci200_las1_ops = {
548 .read = tpci200_read_las1,
549 .write = tpci200_write_las1,
550 .endianness = DEVICE_NATIVE_ENDIAN,
551 .valid = {
552 .min_access_size = 1,
553 .max_access_size = 2
557 static const MemoryRegionOps tpci200_las2_ops = {
558 .read = tpci200_read_las2,
559 .write = tpci200_write_las2,
560 .endianness = DEVICE_NATIVE_ENDIAN,
561 .valid = {
562 .min_access_size = 1,
563 .max_access_size = 2
567 static const MemoryRegionOps tpci200_las3_ops = {
568 .read = tpci200_read_las3,
569 .write = tpci200_write_las3,
570 .endianness = DEVICE_NATIVE_ENDIAN,
571 .valid = {
572 .min_access_size = 1,
573 .max_access_size = 1
577 static void tpci200_realize(PCIDevice *pci_dev, Error **errp)
579 TPCI200State *s = TPCI200(pci_dev);
580 uint8_t *c = s->dev.config;
582 pci_set_word(c + PCI_COMMAND, 0x0003);
583 pci_set_word(c + PCI_STATUS, 0x0280);
585 pci_set_byte(c + PCI_INTERRUPT_PIN, 0x01); /* Interrupt pin A */
587 pci_set_byte(c + PCI_CAPABILITY_LIST, 0x40);
588 pci_set_long(c + 0x40, 0x48014801);
589 pci_set_long(c + 0x48, 0x00024C06);
590 pci_set_long(c + 0x4C, 0x00000003);
592 memory_region_init_io(&s->mmio, OBJECT(s), &tpci200_cfg_ops,
593 s, "tpci200_mmio", 128);
594 memory_region_init_io(&s->io, OBJECT(s), &tpci200_cfg_ops,
595 s, "tpci200_io", 128);
596 memory_region_init_io(&s->las0, OBJECT(s), &tpci200_las0_ops,
597 s, "tpci200_las0", 256);
598 memory_region_init_io(&s->las1, OBJECT(s), &tpci200_las1_ops,
599 s, "tpci200_las1", 1024);
600 memory_region_init_io(&s->las2, OBJECT(s), &tpci200_las2_ops,
601 s, "tpci200_las2", 32 * MiB);
602 memory_region_init_io(&s->las3, OBJECT(s), &tpci200_las3_ops,
603 s, "tpci200_las3", 16 * MiB);
604 pci_register_bar(&s->dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mmio);
605 pci_register_bar(&s->dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &s->io);
606 pci_register_bar(&s->dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->las0);
607 pci_register_bar(&s->dev, 3, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->las1);
608 pci_register_bar(&s->dev, 4, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->las2);
609 pci_register_bar(&s->dev, 5, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->las3);
611 ipack_bus_new_inplace(&s->bus, sizeof(s->bus), DEVICE(pci_dev), NULL,
612 N_MODULES, tpci200_set_irq);
615 static const VMStateDescription vmstate_tpci200 = {
616 .name = "tpci200",
617 .version_id = 1,
618 .minimum_version_id = 1,
619 .fields = (VMStateField[]) {
620 VMSTATE_PCI_DEVICE(dev, TPCI200State),
621 VMSTATE_BOOL_ARRAY(big_endian, TPCI200State, 3),
622 VMSTATE_UINT8_ARRAY(ctrl, TPCI200State, N_MODULES),
623 VMSTATE_UINT16(status, TPCI200State),
624 VMSTATE_UINT8(int_set, TPCI200State),
625 VMSTATE_END_OF_LIST()
629 static void tpci200_class_init(ObjectClass *klass, void *data)
631 DeviceClass *dc = DEVICE_CLASS(klass);
632 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
634 k->realize = tpci200_realize;
635 k->vendor_id = PCI_VENDOR_ID_TEWS;
636 k->device_id = PCI_DEVICE_ID_TEWS_TPCI200;
637 k->class_id = PCI_CLASS_BRIDGE_OTHER;
638 k->subsystem_vendor_id = PCI_VENDOR_ID_TEWS;
639 k->subsystem_id = 0x300A;
640 set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
641 dc->desc = "TEWS TPCI200 IndustryPack carrier";
642 dc->vmsd = &vmstate_tpci200;
645 static const TypeInfo tpci200_info = {
646 .name = TYPE_TPCI200,
647 .parent = TYPE_PCI_DEVICE,
648 .instance_size = sizeof(TPCI200State),
649 .class_init = tpci200_class_init,
650 .interfaces = (InterfaceInfo[]) {
651 { INTERFACE_CONVENTIONAL_PCI_DEVICE },
652 { },
656 static void tpci200_register_types(void)
658 type_register_static(&tpci200_info);
661 type_init(tpci200_register_types)