hw/sd/pl181.c

   1 /*
   2  * Arm PrimeCell PL181 MultiMedia Card Interface
   3  *
   4  * Copyright (c) 2007 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the GPL.
   8  */
   9
  10 #include "qemu/osdep.h"
  11 #include "sysemu/blockdev.h"
  12 #include "hw/sysbus.h"
  13 #include "migration/vmstate.h"
  14 #include "hw/irq.h"
  15 #include "hw/sd/sd.h"
  16 #include "qemu/log.h"
  17 #include "qemu/module.h"
  18 #include "qemu/error-report.h"
  19 #include "qapi/error.h"
  20 #include "trace.h"
  21 #include "qom/object.h"
  22
  23 #define PL181_FIFO_LEN 16
  24
  25 #define TYPE_PL181 "pl181"
  26 OBJECT_DECLARE_SIMPLE_TYPE(PL181State, PL181)
  27
  28 #define TYPE_PL181_BUS "pl181-bus"
  29
  30 struct PL181State {
  31     SysBusDevice parent_obj;
  32
  33     MemoryRegion iomem;
  34     SDBus sdbus;
  35     uint32_t clock;
  36     uint32_t power;
  37     uint32_t cmdarg;
  38     uint32_t cmd;
  39     uint32_t datatimer;
  40     uint32_t datalength;
  41     uint32_t respcmd;
  42     uint32_t response[4];
  43     uint32_t datactrl;
  44     uint32_t datacnt;
  45     uint32_t status;
  46     uint32_t mask[2];
  47     int32_t fifo_pos;
  48     int32_t fifo_len;
  49     /* The linux 2.6.21 driver is buggy, and misbehaves if new data arrives
  50        while it is reading the FIFO.  We hack around this by deferring
  51        subsequent transfers until after the driver polls the status word.
  52        http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=4446/1
  53      */
  54     int32_t linux_hack;
  55     uint32_t fifo[PL181_FIFO_LEN]; /* TODO use Fifo32 */
  56     qemu_irq irq[2];
  57     /* GPIO outputs for 'card is readonly' and 'card inserted' */
  58     qemu_irq card_readonly;
  59     qemu_irq card_inserted;
  60 };
  61
  62 static const VMStateDescription vmstate_pl181 = {
  63     .name = "pl181",
  64     .version_id = 1,
  65     .minimum_version_id = 1,
  66     .fields = (VMStateField[]) {
  67         VMSTATE_UINT32(clock, PL181State),
  68         VMSTATE_UINT32(power, PL181State),
  69         VMSTATE_UINT32(cmdarg, PL181State),
  70         VMSTATE_UINT32(cmd, PL181State),
  71         VMSTATE_UINT32(datatimer, PL181State),
  72         VMSTATE_UINT32(datalength, PL181State),
  73         VMSTATE_UINT32(respcmd, PL181State),
  74         VMSTATE_UINT32_ARRAY(response, PL181State, 4),
  75         VMSTATE_UINT32(datactrl, PL181State),
  76         VMSTATE_UINT32(datacnt, PL181State),
  77         VMSTATE_UINT32(status, PL181State),
  78         VMSTATE_UINT32_ARRAY(mask, PL181State, 2),
  79         VMSTATE_INT32(fifo_pos, PL181State),
  80         VMSTATE_INT32(fifo_len, PL181State),
  81         VMSTATE_INT32(linux_hack, PL181State),
  82         VMSTATE_UINT32_ARRAY(fifo, PL181State, PL181_FIFO_LEN),
  83         VMSTATE_END_OF_LIST()
  84     }
  85 };
  86
  87 #define PL181_CMD_INDEX     0x3f
  88 #define PL181_CMD_RESPONSE  (1 << 6)
  89 #define PL181_CMD_LONGRESP  (1 << 7)
  90 #define PL181_CMD_INTERRUPT (1 << 8)
  91 #define PL181_CMD_PENDING   (1 << 9)
  92 #define PL181_CMD_ENABLE    (1 << 10)
  93
  94 #define PL181_DATA_ENABLE             (1 << 0)
  95 #define PL181_DATA_DIRECTION          (1 << 1)
  96 #define PL181_DATA_MODE               (1 << 2)
  97 #define PL181_DATA_DMAENABLE          (1 << 3)
  98
  99 #define PL181_STATUS_CMDCRCFAIL       (1 << 0)
 100 #define PL181_STATUS_DATACRCFAIL      (1 << 1)
 101 #define PL181_STATUS_CMDTIMEOUT       (1 << 2)
 102 #define PL181_STATUS_DATATIMEOUT      (1 << 3)
 103 #define PL181_STATUS_TXUNDERRUN       (1 << 4)
 104 #define PL181_STATUS_RXOVERRUN        (1 << 5)
 105 #define PL181_STATUS_CMDRESPEND       (1 << 6)
 106 #define PL181_STATUS_CMDSENT          (1 << 7)
 107 #define PL181_STATUS_DATAEND          (1 << 8)
 108 #define PL181_STATUS_DATABLOCKEND     (1 << 10)
 109 #define PL181_STATUS_CMDACTIVE        (1 << 11)
 110 #define PL181_STATUS_TXACTIVE         (1 << 12)
 111 #define PL181_STATUS_RXACTIVE         (1 << 13)
 112 #define PL181_STATUS_TXFIFOHALFEMPTY  (1 << 14)
 113 #define PL181_STATUS_RXFIFOHALFFULL   (1 << 15)
 114 #define PL181_STATUS_TXFIFOFULL       (1 << 16)
 115 #define PL181_STATUS_RXFIFOFULL       (1 << 17)
 116 #define PL181_STATUS_TXFIFOEMPTY      (1 << 18)
 117 #define PL181_STATUS_RXFIFOEMPTY      (1 << 19)
 118 #define PL181_STATUS_TXDATAAVLBL      (1 << 20)
 119 #define PL181_STATUS_RXDATAAVLBL      (1 << 21)
 120
 121 #define PL181_STATUS_TX_FIFO (PL181_STATUS_TXACTIVE \
 122                              |PL181_STATUS_TXFIFOHALFEMPTY \
 123                              |PL181_STATUS_TXFIFOFULL \
 124                              |PL181_STATUS_TXFIFOEMPTY \
 125                              |PL181_STATUS_TXDATAAVLBL)
 126 #define PL181_STATUS_RX_FIFO (PL181_STATUS_RXACTIVE \
 127                              |PL181_STATUS_RXFIFOHALFFULL \
 128                              |PL181_STATUS_RXFIFOFULL \
 129                              |PL181_STATUS_RXFIFOEMPTY \
 130                              |PL181_STATUS_RXDATAAVLBL)
 131
 132 static const unsigned char pl181_id[] =
 133 { 0x81, 0x11, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
 134
 135 static void pl181_update(PL181State *s)
 136 {
 137     int i;
 138     for (i = 0; i < 2; i++) {
 139         qemu_set_irq(s->irq[i], (s->status & s->mask[i]) != 0);
 140     }
 141 }
 142
 143 static void pl181_fifo_push(PL181State *s, uint32_t value)
 144 {
 145     int n;
 146
 147     if (s->fifo_len == PL181_FIFO_LEN) {
 148         error_report("%s: FIFO overflow", __func__);
 149         return;
 150     }
 151     n = (s->fifo_pos + s->fifo_len) & (PL181_FIFO_LEN - 1);
 152     s->fifo_len++;
 153     s->fifo[n] = value;
 154     trace_pl181_fifo_push(value);
 155 }
 156
 157 static uint32_t pl181_fifo_pop(PL181State *s)
 158 {
 159     uint32_t value;
 160
 161     if (s->fifo_len == 0) {
 162         error_report("%s: FIFO underflow", __func__);
 163         return 0;
 164     }
 165     value = s->fifo[s->fifo_pos];
 166     s->fifo_len--;
 167     s->fifo_pos = (s->fifo_pos + 1) & (PL181_FIFO_LEN - 1);
 168     trace_pl181_fifo_pop(value);
 169     return value;
 170 }
 171
 172 static void pl181_do_command(PL181State *s)
 173 {
 174     SDRequest request;
 175     uint8_t response[16];
 176     int rlen;
 177
 178     request.cmd = s->cmd & PL181_CMD_INDEX;
 179     request.arg = s->cmdarg;
 180     trace_pl181_command_send(request.cmd, request.arg);
 181     rlen = sdbus_do_command(&s->sdbus, &request, response);
 182     if (rlen < 0)
 183         goto error;
 184     if (s->cmd & PL181_CMD_RESPONSE) {
 185         if (rlen == 0 || (rlen == 4 && (s->cmd & PL181_CMD_LONGRESP)))
 186             goto error;
 187         if (rlen != 4 && rlen != 16)
 188             goto error;
 189         s->response[0] = ldl_be_p(&response[0]);
 190         if (rlen == 4) {
 191             s->response[1] = s->response[2] = s->response[3] = 0;
 192         } else {
 193             s->response[1] = ldl_be_p(&response[4]);
 194             s->response[2] = ldl_be_p(&response[8]);
 195             s->response[3] = ldl_be_p(&response[12]) & ~1;
 196         }
 197         trace_pl181_command_response_pending();
 198         s->status |= PL181_STATUS_CMDRESPEND;
 199     } else {
 200         trace_pl181_command_sent();
 201         s->status |= PL181_STATUS_CMDSENT;
 202     }
 203     return;
 204
 205 error:
 206     trace_pl181_command_timeout();
 207     s->status |= PL181_STATUS_CMDTIMEOUT;
 208 }
 209
 210 /* Transfer data between the card and the FIFO.  This is complicated by
 211    the FIFO holding 32-bit words and the card taking data in single byte
 212    chunks.  FIFO bytes are transferred in little-endian order.  */
 213
 214 static void pl181_fifo_run(PL181State *s)
 215 {
 216     uint32_t bits;
 217     uint32_t value = 0;
 218     int n;
 219     int is_read;
 220
 221     is_read = (s->datactrl & PL181_DATA_DIRECTION) != 0;
 222     if (s->datacnt != 0 && (!is_read || sdbus_data_ready(&s->sdbus))
 223             && !s->linux_hack) {
 224         if (is_read) {
 225             n = 0;
 226             while (s->datacnt && s->fifo_len < PL181_FIFO_LEN) {
 227                 value |= (uint32_t)sdbus_read_byte(&s->sdbus) << (n * 8);
 228                 s->datacnt--;
 229                 n++;
 230                 if (n == 4) {
 231                     pl181_fifo_push(s, value);
 232                     n = 0;
 233                     value = 0;
 234                 }
 235             }
 236             if (n != 0) {
 237                 pl181_fifo_push(s, value);
 238             }
 239         } else { /* write */
 240             n = 0;
 241             while (s->datacnt > 0 && (s->fifo_len > 0 || n > 0)) {
 242                 if (n == 0) {
 243                     value = pl181_fifo_pop(s);
 244                     n = 4;
 245                 }
 246                 n--;
 247                 s->datacnt--;
 248                 sdbus_write_byte(&s->sdbus, value & 0xff);
 249                 value >>= 8;
 250             }
 251         }
 252     }
 253     s->status &= ~(PL181_STATUS_RX_FIFO | PL181_STATUS_TX_FIFO);
 254     if (s->datacnt == 0) {
 255         s->status |= PL181_STATUS_DATAEND;
 256         /* HACK: */
 257         s->status |= PL181_STATUS_DATABLOCKEND;
 258         trace_pl181_fifo_transfer_complete();
 259     }
 260     if (s->datacnt == 0 && s->fifo_len == 0) {
 261         s->datactrl &= ~PL181_DATA_ENABLE;
 262         trace_pl181_data_engine_idle();
 263     } else {
 264         /* Update FIFO bits.  */
 265         bits = PL181_STATUS_TXACTIVE | PL181_STATUS_RXACTIVE;
 266         if (s->fifo_len == 0) {
 267             bits |= PL181_STATUS_TXFIFOEMPTY;
 268             bits |= PL181_STATUS_RXFIFOEMPTY;
 269         } else {
 270             bits |= PL181_STATUS_TXDATAAVLBL;
 271             bits |= PL181_STATUS_RXDATAAVLBL;
 272         }
 273         if (s->fifo_len == 16) {
 274             bits |= PL181_STATUS_TXFIFOFULL;
 275             bits |= PL181_STATUS_RXFIFOFULL;
 276         }
 277         if (s->fifo_len <= 8) {
 278             bits |= PL181_STATUS_TXFIFOHALFEMPTY;
 279         }
 280         if (s->fifo_len >= 8) {
 281             bits |= PL181_STATUS_RXFIFOHALFFULL;
 282         }
 283         if (s->datactrl & PL181_DATA_DIRECTION) {
 284             bits &= PL181_STATUS_RX_FIFO;
 285         } else {
 286             bits &= PL181_STATUS_TX_FIFO;
 287         }
 288         s->status |= bits;
 289     }
 290 }
 291
 292 static uint64_t pl181_read(void *opaque, hwaddr offset,
 293                            unsigned size)
 294 {
 295     PL181State *s = (PL181State *)opaque;
 296     uint32_t tmp;
 297
 298     if (offset >= 0xfe0 && offset < 0x1000) {
 299         return pl181_id[(offset - 0xfe0) >> 2];
 300     }
 301     switch (offset) {
 302     case 0x00: /* Power */
 303         return s->power;
 304     case 0x04: /* Clock */
 305         return s->clock;
 306     case 0x08: /* Argument */
 307         return s->cmdarg;
 308     case 0x0c: /* Command */
 309         return s->cmd;
 310     case 0x10: /* RespCmd */
 311         return s->respcmd;
 312     case 0x14: /* Response0 */
 313         return s->response[0];
 314     case 0x18: /* Response1 */
 315         return s->response[1];
 316     case 0x1c: /* Response2 */
 317         return s->response[2];
 318     case 0x20: /* Response3 */
 319         return s->response[3];
 320     case 0x24: /* DataTimer */
 321         return s->datatimer;
 322     case 0x28: /* DataLength */
 323         return s->datalength;
 324     case 0x2c: /* DataCtrl */
 325         return s->datactrl;
 326     case 0x30: /* DataCnt */
 327         return s->datacnt;
 328     case 0x34: /* Status */
 329         tmp = s->status;
 330         if (s->linux_hack) {
 331             s->linux_hack = 0;
 332             pl181_fifo_run(s);
 333             pl181_update(s);
 334         }
 335         return tmp;
 336     case 0x3c: /* Mask0 */
 337         return s->mask[0];
 338     case 0x40: /* Mask1 */
 339         return s->mask[1];
 340     case 0x48: /* FifoCnt */
 341         /* The documentation is somewhat vague about exactly what FifoCnt
 342            does.  On real hardware it appears to be when decrememnted
 343            when a word is transferred between the FIFO and the serial
 344            data engine.  DataCnt is decremented after each byte is
 345            transferred between the serial engine and the card.
 346            We don't emulate this level of detail, so both can be the same.  */
 347         tmp = (s->datacnt + 3) >> 2;
 348         if (s->linux_hack) {
 349             s->linux_hack = 0;
 350             pl181_fifo_run(s);
 351             pl181_update(s);
 352         }
 353         return tmp;
 354     case 0x80: case 0x84: case 0x88: case 0x8c: /* FifoData */
 355     case 0x90: case 0x94: case 0x98: case 0x9c:
 356     case 0xa0: case 0xa4: case 0xa8: case 0xac:
 357     case 0xb0: case 0xb4: case 0xb8: case 0xbc:
 358         if (s->fifo_len == 0) {
 359             qemu_log_mask(LOG_GUEST_ERROR, "pl181: Unexpected FIFO read\n");
 360             return 0;
 361         } else {
 362             uint32_t value;
 363             value = pl181_fifo_pop(s);
 364             s->linux_hack = 1;
 365             pl181_fifo_run(s);
 366             pl181_update(s);
 367             return value;
 368         }
 369     default:
 370         qemu_log_mask(LOG_GUEST_ERROR,
 371                       "pl181_read: Bad offset %x\n", (int)offset);
 372         return 0;
 373     }
 374 }
 375
 376 static void pl181_write(void *opaque, hwaddr offset,
 377                         uint64_t value, unsigned size)
 378 {
 379     PL181State *s = (PL181State *)opaque;
 380
 381     switch (offset) {
 382     case 0x00: /* Power */
 383         s->power = value & 0xff;
 384         break;
 385     case 0x04: /* Clock */
 386         s->clock = value & 0xff;
 387         break;
 388     case 0x08: /* Argument */
 389         s->cmdarg = value;
 390         break;
 391     case 0x0c: /* Command */
 392         s->cmd = value;
 393         if (s->cmd & PL181_CMD_ENABLE) {
 394             if (s->cmd & PL181_CMD_INTERRUPT) {
 395                 qemu_log_mask(LOG_UNIMP,
 396                               "pl181: Interrupt mode not implemented\n");
 397             } if (s->cmd & PL181_CMD_PENDING) {
 398                 qemu_log_mask(LOG_UNIMP,
 399                               "pl181: Pending commands not implemented\n");
 400             } else {
 401                 pl181_do_command(s);
 402                 pl181_fifo_run(s);
 403             }
 404             /* The command has completed one way or the other.  */
 405             s->cmd &= ~PL181_CMD_ENABLE;
 406         }
 407         break;
 408     case 0x24: /* DataTimer */
 409         s->datatimer = value;
 410         break;
 411     case 0x28: /* DataLength */
 412         s->datalength = value & 0xffff;
 413         break;
 414     case 0x2c: /* DataCtrl */
 415         s->datactrl = value & 0xff;
 416         if (value & PL181_DATA_ENABLE) {
 417             s->datacnt = s->datalength;
 418             pl181_fifo_run(s);
 419         }
 420         break;
 421     case 0x38: /* Clear */
 422         s->status &= ~(value & 0x7ff);
 423         break;
 424     case 0x3c: /* Mask0 */
 425         s->mask[0] = value;
 426         break;
 427     case 0x40: /* Mask1 */
 428         s->mask[1] = value;
 429         break;
 430     case 0x80: case 0x84: case 0x88: case 0x8c: /* FifoData */
 431     case 0x90: case 0x94: case 0x98: case 0x9c:
 432     case 0xa0: case 0xa4: case 0xa8: case 0xac:
 433     case 0xb0: case 0xb4: case 0xb8: case 0xbc:
 434         if (s->datacnt == 0) {
 435             qemu_log_mask(LOG_GUEST_ERROR, "pl181: Unexpected FIFO write\n");
 436         } else {
 437             pl181_fifo_push(s, value);
 438             pl181_fifo_run(s);
 439         }
 440         break;
 441     default:
 442         qemu_log_mask(LOG_GUEST_ERROR,
 443                       "pl181_write: Bad offset %x\n", (int)offset);
 444     }
 445     pl181_update(s);
 446 }
 447
 448 static const MemoryRegionOps pl181_ops = {
 449     .read = pl181_read,
 450     .write = pl181_write,
 451     .endianness = DEVICE_NATIVE_ENDIAN,
 452 };
 453
 454 static void pl181_set_readonly(DeviceState *dev, bool level)
 455 {
 456     PL181State *s = (PL181State *)dev;
 457
 458     qemu_set_irq(s->card_readonly, level);
 459 }
 460
 461 static void pl181_set_inserted(DeviceState *dev, bool level)
 462 {
 463     PL181State *s = (PL181State *)dev;
 464
 465     qemu_set_irq(s->card_inserted, level);
 466 }
 467
 468 static void pl181_reset(DeviceState *d)
 469 {
 470     PL181State *s = PL181(d);
 471
 472     s->power = 0;
 473     s->cmdarg = 0;
 474     s->cmd = 0;
 475     s->datatimer = 0;
 476     s->datalength = 0;
 477     s->respcmd = 0;
 478     s->response[0] = 0;
 479     s->response[1] = 0;
 480     s->response[2] = 0;
 481     s->response[3] = 0;
 482     s->datatimer = 0;
 483     s->datalength = 0;
 484     s->datactrl = 0;
 485     s->datacnt = 0;
 486     s->status = 0;
 487     s->linux_hack = 0;
 488     s->mask[0] = 0;
 489     s->mask[1] = 0;
 490
 491     /* Reset other state based on current card insertion/readonly status */
 492     pl181_set_inserted(DEVICE(s), sdbus_get_inserted(&s->sdbus));
 493     pl181_set_readonly(DEVICE(s), sdbus_get_readonly(&s->sdbus));
 494 }
 495
 496 static void pl181_init(Object *obj)
 497 {
 498     DeviceState *dev = DEVICE(obj);
 499     PL181State *s = PL181(obj);
 500     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 501
 502     memory_region_init_io(&s->iomem, obj, &pl181_ops, s, "pl181", 0x1000);
 503     sysbus_init_mmio(sbd, &s->iomem);
 504     sysbus_init_irq(sbd, &s->irq[0]);
 505     sysbus_init_irq(sbd, &s->irq[1]);
 506     qdev_init_gpio_out_named(dev, &s->card_readonly, "card-read-only", 1);
 507     qdev_init_gpio_out_named(dev, &s->card_inserted, "card-inserted", 1);
 508
 509     qbus_create_inplace(&s->sdbus, sizeof(s->sdbus),
 510                         TYPE_PL181_BUS, dev, "sd-bus");
 511 }
 512
 513 static void pl181_class_init(ObjectClass *klass, void *data)
 514 {
 515     DeviceClass *k = DEVICE_CLASS(klass);
 516
 517     k->vmsd = &vmstate_pl181;
 518     k->reset = pl181_reset;
 519     /* Reason: output IRQs should be wired up */
 520     k->user_creatable = false;
 521 }
 522
 523 static const TypeInfo pl181_info = {
 524     .name          = TYPE_PL181,
 525     .parent        = TYPE_SYS_BUS_DEVICE,
 526     .instance_size = sizeof(PL181State),
 527     .instance_init = pl181_init,
 528     .class_init    = pl181_class_init,
 529 };
 530
 531 static void pl181_bus_class_init(ObjectClass *klass, void *data)
 532 {
 533     SDBusClass *sbc = SD_BUS_CLASS(klass);
 534
 535     sbc->set_inserted = pl181_set_inserted;
 536     sbc->set_readonly = pl181_set_readonly;
 537 }
 538
 539 static const TypeInfo pl181_bus_info = {
 540     .name = TYPE_PL181_BUS,
 541     .parent = TYPE_SD_BUS,
 542     .instance_size = sizeof(SDBus),
 543     .class_init = pl181_bus_class_init,
 544 };
 545
 546 static void pl181_register_types(void)
 547 {
 548     type_register_static(&pl181_info);
 549     type_register_static(&pl181_bus_info);
 550 }
 551
 552 type_init(pl181_register_types)