hw/arm/armsse.c: Use correct SYS_CONFIG0 register value for SSE-300
[qemu/ar7.git] / linux-user / arm / cpu_loop.c
blobcadfb7fa43978f9691f5ce479cdbc3b98e212861
1 /*
2 * qemu user cpu loop
4 * Copyright (c) 2003-2008 Fabrice Bellard
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
20 #include "qemu/osdep.h"
21 #include "qemu-common.h"
22 #include "qemu.h"
23 #include "elf.h"
24 #include "cpu_loop-common.h"
25 #include "hw/semihosting/common-semi.h"
27 #define get_user_code_u32(x, gaddr, env) \
28 ({ abi_long __r = get_user_u32((x), (gaddr)); \
29 if (!__r && bswap_code(arm_sctlr_b(env))) { \
30 (x) = bswap32(x); \
31 } \
32 __r; \
35 #define get_user_code_u16(x, gaddr, env) \
36 ({ abi_long __r = get_user_u16((x), (gaddr)); \
37 if (!__r && bswap_code(arm_sctlr_b(env))) { \
38 (x) = bswap16(x); \
39 } \
40 __r; \
43 #define get_user_data_u32(x, gaddr, env) \
44 ({ abi_long __r = get_user_u32((x), (gaddr)); \
45 if (!__r && arm_cpu_bswap_data(env)) { \
46 (x) = bswap32(x); \
47 } \
48 __r; \
51 #define get_user_data_u16(x, gaddr, env) \
52 ({ abi_long __r = get_user_u16((x), (gaddr)); \
53 if (!__r && arm_cpu_bswap_data(env)) { \
54 (x) = bswap16(x); \
55 } \
56 __r; \
59 #define put_user_data_u32(x, gaddr, env) \
60 ({ typeof(x) __x = (x); \
61 if (arm_cpu_bswap_data(env)) { \
62 __x = bswap32(__x); \
63 } \
64 put_user_u32(__x, (gaddr)); \
67 #define put_user_data_u16(x, gaddr, env) \
68 ({ typeof(x) __x = (x); \
69 if (arm_cpu_bswap_data(env)) { \
70 __x = bswap16(__x); \
71 } \
72 put_user_u16(__x, (gaddr)); \
75 /* Commpage handling -- there is no commpage for AArch64 */
78 * See the Linux kernel's Documentation/arm/kernel_user_helpers.txt
79 * Input:
80 * r0 = pointer to oldval
81 * r1 = pointer to newval
82 * r2 = pointer to target value
84 * Output:
85 * r0 = 0 if *ptr was changed, non-0 if no exchange happened
86 * C set if *ptr was changed, clear if no exchange happened
88 * Note segv's in kernel helpers are a bit tricky, we can set the
89 * data address sensibly but the PC address is just the entry point.
91 static void arm_kernel_cmpxchg64_helper(CPUARMState *env)
93 uint64_t oldval, newval, val;
94 uint32_t addr, cpsr;
95 target_siginfo_t info;
97 /* Based on the 32 bit code in do_kernel_trap */
99 /* XXX: This only works between threads, not between processes.
100 It's probably possible to implement this with native host
101 operations. However things like ldrex/strex are much harder so
102 there's not much point trying. */
103 start_exclusive();
104 cpsr = cpsr_read(env);
105 addr = env->regs[2];
107 if (get_user_u64(oldval, env->regs[0])) {
108 env->exception.vaddress = env->regs[0];
109 goto segv;
112 if (get_user_u64(newval, env->regs[1])) {
113 env->exception.vaddress = env->regs[1];
114 goto segv;
117 if (get_user_u64(val, addr)) {
118 env->exception.vaddress = addr;
119 goto segv;
122 if (val == oldval) {
123 val = newval;
125 if (put_user_u64(val, addr)) {
126 env->exception.vaddress = addr;
127 goto segv;
130 env->regs[0] = 0;
131 cpsr |= CPSR_C;
132 } else {
133 env->regs[0] = -1;
134 cpsr &= ~CPSR_C;
136 cpsr_write(env, cpsr, CPSR_C, CPSRWriteByInstr);
137 end_exclusive();
138 return;
140 segv:
141 end_exclusive();
142 /* We get the PC of the entry address - which is as good as anything,
143 on a real kernel what you get depends on which mode it uses. */
144 info.si_signo = TARGET_SIGSEGV;
145 info.si_errno = 0;
146 /* XXX: check env->error_code */
147 info.si_code = TARGET_SEGV_MAPERR;
148 info._sifields._sigfault._addr = env->exception.vaddress;
149 queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
152 /* Handle a jump to the kernel code page. */
153 static int
154 do_kernel_trap(CPUARMState *env)
156 uint32_t addr;
157 uint32_t cpsr;
158 uint32_t val;
160 switch (env->regs[15]) {
161 case 0xffff0fa0: /* __kernel_memory_barrier */
162 /* ??? No-op. Will need to do better for SMP. */
163 break;
164 case 0xffff0fc0: /* __kernel_cmpxchg */
165 /* XXX: This only works between threads, not between processes.
166 It's probably possible to implement this with native host
167 operations. However things like ldrex/strex are much harder so
168 there's not much point trying. */
169 start_exclusive();
170 cpsr = cpsr_read(env);
171 addr = env->regs[2];
172 /* FIXME: This should SEGV if the access fails. */
173 if (get_user_u32(val, addr))
174 val = ~env->regs[0];
175 if (val == env->regs[0]) {
176 val = env->regs[1];
177 /* FIXME: Check for segfaults. */
178 put_user_u32(val, addr);
179 env->regs[0] = 0;
180 cpsr |= CPSR_C;
181 } else {
182 env->regs[0] = -1;
183 cpsr &= ~CPSR_C;
185 cpsr_write(env, cpsr, CPSR_C, CPSRWriteByInstr);
186 end_exclusive();
187 break;
188 case 0xffff0fe0: /* __kernel_get_tls */
189 env->regs[0] = cpu_get_tls(env);
190 break;
191 case 0xffff0f60: /* __kernel_cmpxchg64 */
192 arm_kernel_cmpxchg64_helper(env);
193 break;
195 default:
196 return 1;
198 /* Jump back to the caller. */
199 addr = env->regs[14];
200 if (addr & 1) {
201 env->thumb = 1;
202 addr &= ~1;
204 env->regs[15] = addr;
206 return 0;
209 static bool insn_is_linux_bkpt(uint32_t opcode, bool is_thumb)
212 * Return true if this insn is one of the three magic UDF insns
213 * which the kernel treats as breakpoint insns.
215 if (!is_thumb) {
216 return (opcode & 0x0fffffff) == 0x07f001f0;
217 } else {
219 * Note that we get the two halves of the 32-bit T32 insn
220 * in the opposite order to the value the kernel uses in
221 * its undef_hook struct.
223 return ((opcode & 0xffff) == 0xde01) || (opcode == 0xa000f7f0);
227 void cpu_loop(CPUARMState *env)
229 CPUState *cs = env_cpu(env);
230 int trapnr;
231 unsigned int n, insn;
232 target_siginfo_t info;
233 uint32_t addr;
234 abi_ulong ret;
236 for(;;) {
237 cpu_exec_start(cs);
238 trapnr = cpu_exec(cs);
239 cpu_exec_end(cs);
240 process_queued_cpu_work(cs);
242 switch(trapnr) {
243 case EXCP_UDEF:
244 case EXCP_NOCP:
245 case EXCP_INVSTATE:
247 TaskState *ts = cs->opaque;
248 uint32_t opcode;
249 int rc;
251 /* we handle the FPU emulation here, as Linux */
252 /* we get the opcode */
253 /* FIXME - what to do if get_user() fails? */
254 get_user_code_u32(opcode, env->regs[15], env);
257 * The Linux kernel treats some UDF patterns specially
258 * to use as breakpoints (instead of the architectural
259 * bkpt insn). These should trigger a SIGTRAP rather
260 * than SIGILL.
262 if (insn_is_linux_bkpt(opcode, env->thumb)) {
263 goto excp_debug;
266 rc = EmulateAll(opcode, &ts->fpa, env);
267 if (rc == 0) { /* illegal instruction */
268 info.si_signo = TARGET_SIGILL;
269 info.si_errno = 0;
270 info.si_code = TARGET_ILL_ILLOPN;
271 info._sifields._sigfault._addr = env->regs[15];
272 queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
273 } else if (rc < 0) { /* FP exception */
274 int arm_fpe=0;
276 /* translate softfloat flags to FPSR flags */
277 if (-rc & float_flag_invalid)
278 arm_fpe |= BIT_IOC;
279 if (-rc & float_flag_divbyzero)
280 arm_fpe |= BIT_DZC;
281 if (-rc & float_flag_overflow)
282 arm_fpe |= BIT_OFC;
283 if (-rc & float_flag_underflow)
284 arm_fpe |= BIT_UFC;
285 if (-rc & float_flag_inexact)
286 arm_fpe |= BIT_IXC;
288 FPSR fpsr = ts->fpa.fpsr;
289 //printf("fpsr 0x%x, arm_fpe 0x%x\n",fpsr,arm_fpe);
291 if (fpsr & (arm_fpe << 16)) { /* exception enabled? */
292 info.si_signo = TARGET_SIGFPE;
293 info.si_errno = 0;
295 /* ordered by priority, least first */
296 if (arm_fpe & BIT_IXC) info.si_code = TARGET_FPE_FLTRES;
297 if (arm_fpe & BIT_UFC) info.si_code = TARGET_FPE_FLTUND;
298 if (arm_fpe & BIT_OFC) info.si_code = TARGET_FPE_FLTOVF;
299 if (arm_fpe & BIT_DZC) info.si_code = TARGET_FPE_FLTDIV;
300 if (arm_fpe & BIT_IOC) info.si_code = TARGET_FPE_FLTINV;
302 info._sifields._sigfault._addr = env->regs[15];
303 queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
304 } else {
305 env->regs[15] += 4;
308 /* accumulate unenabled exceptions */
309 if ((!(fpsr & BIT_IXE)) && (arm_fpe & BIT_IXC))
310 fpsr |= BIT_IXC;
311 if ((!(fpsr & BIT_UFE)) && (arm_fpe & BIT_UFC))
312 fpsr |= BIT_UFC;
313 if ((!(fpsr & BIT_OFE)) && (arm_fpe & BIT_OFC))
314 fpsr |= BIT_OFC;
315 if ((!(fpsr & BIT_DZE)) && (arm_fpe & BIT_DZC))
316 fpsr |= BIT_DZC;
317 if ((!(fpsr & BIT_IOE)) && (arm_fpe & BIT_IOC))
318 fpsr |= BIT_IOC;
319 ts->fpa.fpsr=fpsr;
320 } else { /* everything OK */
321 /* increment PC */
322 env->regs[15] += 4;
325 break;
326 case EXCP_SWI:
328 env->eabi = 1;
329 /* system call */
330 if (env->thumb) {
331 /* Thumb is always EABI style with syscall number in r7 */
332 n = env->regs[7];
333 } else {
335 * Equivalent of kernel CONFIG_OABI_COMPAT: read the
336 * Arm SVC insn to extract the immediate, which is the
337 * syscall number in OABI.
339 /* FIXME - what to do if get_user() fails? */
340 get_user_code_u32(insn, env->regs[15] - 4, env);
341 n = insn & 0xffffff;
342 if (n == 0) {
343 /* zero immediate: EABI, syscall number in r7 */
344 n = env->regs[7];
345 } else {
347 * This XOR matches the kernel code: an immediate
348 * in the valid range (0x900000 .. 0x9fffff) is
349 * converted into the correct EABI-style syscall
350 * number; invalid immediates end up as values
351 * > 0xfffff and are handled below as out-of-range.
353 n ^= ARM_SYSCALL_BASE;
354 env->eabi = 0;
358 if (n > ARM_NR_BASE) {
359 switch (n) {
360 case ARM_NR_cacheflush:
361 /* nop */
362 break;
363 case ARM_NR_set_tls:
364 cpu_set_tls(env, env->regs[0]);
365 env->regs[0] = 0;
366 break;
367 case ARM_NR_breakpoint:
368 env->regs[15] -= env->thumb ? 2 : 4;
369 goto excp_debug;
370 case ARM_NR_get_tls:
371 env->regs[0] = cpu_get_tls(env);
372 break;
373 default:
374 if (n < 0xf0800) {
376 * Syscalls 0xf0000..0xf07ff (or 0x9f0000..
377 * 0x9f07ff in OABI numbering) are defined
378 * to return -ENOSYS rather than raising
379 * SIGILL. Note that we have already
380 * removed the 0x900000 prefix.
382 qemu_log_mask(LOG_UNIMP,
383 "qemu: Unsupported ARM syscall: 0x%x\n",
385 env->regs[0] = -TARGET_ENOSYS;
386 } else {
388 * Otherwise SIGILL. This includes any SWI with
389 * immediate not originally 0x9fxxxx, because
390 * of the earlier XOR.
392 info.si_signo = TARGET_SIGILL;
393 info.si_errno = 0;
394 info.si_code = TARGET_ILL_ILLTRP;
395 info._sifields._sigfault._addr = env->regs[15];
396 if (env->thumb) {
397 info._sifields._sigfault._addr -= 2;
398 } else {
399 info._sifields._sigfault._addr -= 4;
401 queue_signal(env, info.si_signo,
402 QEMU_SI_FAULT, &info);
404 break;
406 } else {
407 ret = do_syscall(env,
409 env->regs[0],
410 env->regs[1],
411 env->regs[2],
412 env->regs[3],
413 env->regs[4],
414 env->regs[5],
415 0, 0);
416 if (ret == -TARGET_ERESTARTSYS) {
417 env->regs[15] -= env->thumb ? 2 : 4;
418 } else if (ret != -TARGET_QEMU_ESIGRETURN) {
419 env->regs[0] = ret;
423 break;
424 case EXCP_SEMIHOST:
425 env->regs[0] = do_common_semihosting(cs);
426 env->regs[15] += env->thumb ? 2 : 4;
427 break;
428 case EXCP_INTERRUPT:
429 /* just indicate that signals should be handled asap */
430 break;
431 case EXCP_PREFETCH_ABORT:
432 case EXCP_DATA_ABORT:
433 addr = env->exception.vaddress;
435 info.si_signo = TARGET_SIGSEGV;
436 info.si_errno = 0;
437 /* XXX: check env->error_code */
438 info.si_code = TARGET_SEGV_MAPERR;
439 info._sifields._sigfault._addr = addr;
440 queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
442 break;
443 case EXCP_DEBUG:
444 case EXCP_BKPT:
445 excp_debug:
446 info.si_signo = TARGET_SIGTRAP;
447 info.si_errno = 0;
448 info.si_code = TARGET_TRAP_BRKPT;
449 queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
450 break;
451 case EXCP_KERNEL_TRAP:
452 if (do_kernel_trap(env))
453 goto error;
454 break;
455 case EXCP_YIELD:
456 /* nothing to do here for user-mode, just resume guest code */
457 break;
458 case EXCP_ATOMIC:
459 cpu_exec_step_atomic(cs);
460 break;
461 default:
462 error:
463 EXCP_DUMP(env, "qemu: unhandled CPU exception 0x%x - aborting\n", trapnr);
464 abort();
466 process_pending_signals(env);
470 void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs)
472 CPUState *cpu = env_cpu(env);
473 TaskState *ts = cpu->opaque;
474 struct image_info *info = ts->info;
475 int i;
477 cpsr_write(env, regs->uregs[16], CPSR_USER | CPSR_EXEC,
478 CPSRWriteByInstr);
479 for(i = 0; i < 16; i++) {
480 env->regs[i] = regs->uregs[i];
482 #ifdef TARGET_WORDS_BIGENDIAN
483 /* Enable BE8. */
484 if (EF_ARM_EABI_VERSION(info->elf_flags) >= EF_ARM_EABI_VER4
485 && (info->elf_flags & EF_ARM_BE8)) {
486 env->uncached_cpsr |= CPSR_E;
487 env->cp15.sctlr_el[1] |= SCTLR_E0E;
488 } else {
489 env->cp15.sctlr_el[1] |= SCTLR_B;
491 arm_rebuild_hflags(env);
492 #endif
494 ts->stack_base = info->start_stack;
495 ts->heap_base = info->brk;
496 /* This will be filled in on the first SYS_HEAPINFO call. */
497 ts->heap_limit = 0;