qjson: Give each of the six structural chars its own token type
[qemu/ar7.git] / hw / net / smc91c111.c
blobc19cdd14dfc62cd727e83fc28c38b2e9faae620f
1 /*
2 * SMSC 91C111 Ethernet interface emulation
4 * Copyright (c) 2005 CodeSourcery, LLC.
5 * Written by Paul Brook
7 * This code is licensed under the GPL
8 */
10 #include "hw/sysbus.h"
11 #include "net/net.h"
12 #include "hw/devices.h"
13 /* For crc32 */
14 #include <zlib.h>
16 /* Number of 2k memory pages available. */
17 #define NUM_PACKETS 4
19 #define TYPE_SMC91C111 "smc91c111"
20 #define SMC91C111(obj) OBJECT_CHECK(smc91c111_state, (obj), TYPE_SMC91C111)
22 typedef struct {
23 SysBusDevice parent_obj;
25 NICState *nic;
26 NICConf conf;
27 uint16_t tcr;
28 uint16_t rcr;
29 uint16_t cr;
30 uint16_t ctr;
31 uint16_t gpr;
32 uint16_t ptr;
33 uint16_t ercv;
34 qemu_irq irq;
35 int bank;
36 int packet_num;
37 int tx_alloc;
38 /* Bitmask of allocated packets. */
39 int allocated;
40 int tx_fifo_len;
41 int tx_fifo[NUM_PACKETS];
42 int rx_fifo_len;
43 int rx_fifo[NUM_PACKETS];
44 int tx_fifo_done_len;
45 int tx_fifo_done[NUM_PACKETS];
46 /* Packet buffer memory. */
47 uint8_t data[NUM_PACKETS][2048];
48 uint8_t int_level;
49 uint8_t int_mask;
50 MemoryRegion mmio;
51 } smc91c111_state;
53 static const VMStateDescription vmstate_smc91c111 = {
54 .name = "smc91c111",
55 .version_id = 1,
56 .minimum_version_id = 1,
57 .fields = (VMStateField[]) {
58 VMSTATE_UINT16(tcr, smc91c111_state),
59 VMSTATE_UINT16(rcr, smc91c111_state),
60 VMSTATE_UINT16(cr, smc91c111_state),
61 VMSTATE_UINT16(ctr, smc91c111_state),
62 VMSTATE_UINT16(gpr, smc91c111_state),
63 VMSTATE_UINT16(ptr, smc91c111_state),
64 VMSTATE_UINT16(ercv, smc91c111_state),
65 VMSTATE_INT32(bank, smc91c111_state),
66 VMSTATE_INT32(packet_num, smc91c111_state),
67 VMSTATE_INT32(tx_alloc, smc91c111_state),
68 VMSTATE_INT32(allocated, smc91c111_state),
69 VMSTATE_INT32(tx_fifo_len, smc91c111_state),
70 VMSTATE_INT32_ARRAY(tx_fifo, smc91c111_state, NUM_PACKETS),
71 VMSTATE_INT32(rx_fifo_len, smc91c111_state),
72 VMSTATE_INT32_ARRAY(rx_fifo, smc91c111_state, NUM_PACKETS),
73 VMSTATE_INT32(tx_fifo_done_len, smc91c111_state),
74 VMSTATE_INT32_ARRAY(tx_fifo_done, smc91c111_state, NUM_PACKETS),
75 VMSTATE_BUFFER_UNSAFE(data, smc91c111_state, 0, NUM_PACKETS * 2048),
76 VMSTATE_UINT8(int_level, smc91c111_state),
77 VMSTATE_UINT8(int_mask, smc91c111_state),
78 VMSTATE_END_OF_LIST()
82 #define RCR_SOFT_RST 0x8000
83 #define RCR_STRIP_CRC 0x0200
84 #define RCR_RXEN 0x0100
86 #define TCR_EPH_LOOP 0x2000
87 #define TCR_NOCRC 0x0100
88 #define TCR_PAD_EN 0x0080
89 #define TCR_FORCOL 0x0004
90 #define TCR_LOOP 0x0002
91 #define TCR_TXEN 0x0001
93 #define INT_MD 0x80
94 #define INT_ERCV 0x40
95 #define INT_EPH 0x20
96 #define INT_RX_OVRN 0x10
97 #define INT_ALLOC 0x08
98 #define INT_TX_EMPTY 0x04
99 #define INT_TX 0x02
100 #define INT_RCV 0x01
102 #define CTR_AUTO_RELEASE 0x0800
103 #define CTR_RELOAD 0x0002
104 #define CTR_STORE 0x0001
106 #define RS_ALGNERR 0x8000
107 #define RS_BRODCAST 0x4000
108 #define RS_BADCRC 0x2000
109 #define RS_ODDFRAME 0x1000
110 #define RS_TOOLONG 0x0800
111 #define RS_TOOSHORT 0x0400
112 #define RS_MULTICAST 0x0001
114 /* Update interrupt status. */
115 static void smc91c111_update(smc91c111_state *s)
117 int level;
119 if (s->tx_fifo_len == 0)
120 s->int_level |= INT_TX_EMPTY;
121 if (s->tx_fifo_done_len != 0)
122 s->int_level |= INT_TX;
123 level = (s->int_level & s->int_mask) != 0;
124 qemu_set_irq(s->irq, level);
127 static int smc91c111_can_receive(smc91c111_state *s)
129 if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST)) {
130 return 1;
132 if (s->allocated == (1 << NUM_PACKETS) - 1 ||
133 s->rx_fifo_len == NUM_PACKETS) {
134 return 0;
136 return 1;
139 static inline void smc91c111_flush_queued_packets(smc91c111_state *s)
141 if (smc91c111_can_receive(s)) {
142 qemu_flush_queued_packets(qemu_get_queue(s->nic));
146 /* Try to allocate a packet. Returns 0x80 on failure. */
147 static int smc91c111_allocate_packet(smc91c111_state *s)
149 int i;
150 if (s->allocated == (1 << NUM_PACKETS) - 1) {
151 return 0x80;
154 for (i = 0; i < NUM_PACKETS; i++) {
155 if ((s->allocated & (1 << i)) == 0)
156 break;
158 s->allocated |= 1 << i;
159 return i;
163 /* Process a pending TX allocate. */
164 static void smc91c111_tx_alloc(smc91c111_state *s)
166 s->tx_alloc = smc91c111_allocate_packet(s);
167 if (s->tx_alloc == 0x80)
168 return;
169 s->int_level |= INT_ALLOC;
170 smc91c111_update(s);
173 /* Remove and item from the RX FIFO. */
174 static void smc91c111_pop_rx_fifo(smc91c111_state *s)
176 int i;
178 s->rx_fifo_len--;
179 if (s->rx_fifo_len) {
180 for (i = 0; i < s->rx_fifo_len; i++)
181 s->rx_fifo[i] = s->rx_fifo[i + 1];
182 s->int_level |= INT_RCV;
183 } else {
184 s->int_level &= ~INT_RCV;
186 smc91c111_flush_queued_packets(s);
187 smc91c111_update(s);
190 /* Remove an item from the TX completion FIFO. */
191 static void smc91c111_pop_tx_fifo_done(smc91c111_state *s)
193 int i;
195 if (s->tx_fifo_done_len == 0)
196 return;
197 s->tx_fifo_done_len--;
198 for (i = 0; i < s->tx_fifo_done_len; i++)
199 s->tx_fifo_done[i] = s->tx_fifo_done[i + 1];
202 /* Release the memory allocated to a packet. */
203 static void smc91c111_release_packet(smc91c111_state *s, int packet)
205 s->allocated &= ~(1 << packet);
206 if (s->tx_alloc == 0x80)
207 smc91c111_tx_alloc(s);
208 smc91c111_flush_queued_packets(s);
211 /* Flush the TX FIFO. */
212 static void smc91c111_do_tx(smc91c111_state *s)
214 int i;
215 int len;
216 int control;
217 int packetnum;
218 uint8_t *p;
220 if ((s->tcr & TCR_TXEN) == 0)
221 return;
222 if (s->tx_fifo_len == 0)
223 return;
224 for (i = 0; i < s->tx_fifo_len; i++) {
225 packetnum = s->tx_fifo[i];
226 p = &s->data[packetnum][0];
227 /* Set status word. */
228 *(p++) = 0x01;
229 *(p++) = 0x40;
230 len = *(p++);
231 len |= ((int)*(p++)) << 8;
232 len -= 6;
233 control = p[len + 1];
234 if (control & 0x20)
235 len++;
236 /* ??? This overwrites the data following the buffer.
237 Don't know what real hardware does. */
238 if (len < 64 && (s->tcr & TCR_PAD_EN)) {
239 memset(p + len, 0, 64 - len);
240 len = 64;
242 #if 0
244 int add_crc;
246 /* The card is supposed to append the CRC to the frame.
247 However none of the other network traffic has the CRC
248 appended. Suspect this is low level ethernet detail we
249 don't need to worry about. */
250 add_crc = (control & 0x10) || (s->tcr & TCR_NOCRC) == 0;
251 if (add_crc) {
252 uint32_t crc;
254 crc = crc32(~0, p, len);
255 memcpy(p + len, &crc, 4);
256 len += 4;
259 #endif
260 if (s->ctr & CTR_AUTO_RELEASE)
261 /* Race? */
262 smc91c111_release_packet(s, packetnum);
263 else if (s->tx_fifo_done_len < NUM_PACKETS)
264 s->tx_fifo_done[s->tx_fifo_done_len++] = packetnum;
265 qemu_send_packet(qemu_get_queue(s->nic), p, len);
267 s->tx_fifo_len = 0;
268 smc91c111_update(s);
271 /* Add a packet to the TX FIFO. */
272 static void smc91c111_queue_tx(smc91c111_state *s, int packet)
274 if (s->tx_fifo_len == NUM_PACKETS)
275 return;
276 s->tx_fifo[s->tx_fifo_len++] = packet;
277 smc91c111_do_tx(s);
280 static void smc91c111_reset(DeviceState *dev)
282 smc91c111_state *s = SMC91C111(dev);
284 s->bank = 0;
285 s->tx_fifo_len = 0;
286 s->tx_fifo_done_len = 0;
287 s->rx_fifo_len = 0;
288 s->allocated = 0;
289 s->packet_num = 0;
290 s->tx_alloc = 0;
291 s->tcr = 0;
292 s->rcr = 0;
293 s->cr = 0xa0b1;
294 s->ctr = 0x1210;
295 s->ptr = 0;
296 s->ercv = 0x1f;
297 s->int_level = INT_TX_EMPTY;
298 s->int_mask = 0;
299 smc91c111_update(s);
302 #define SET_LOW(name, val) s->name = (s->name & 0xff00) | val
303 #define SET_HIGH(name, val) s->name = (s->name & 0xff) | (val << 8)
305 static void smc91c111_writeb(void *opaque, hwaddr offset,
306 uint32_t value)
308 smc91c111_state *s = (smc91c111_state *)opaque;
310 offset = offset & 0xf;
311 if (offset == 14) {
312 s->bank = value;
313 return;
315 if (offset == 15)
316 return;
317 switch (s->bank) {
318 case 0:
319 switch (offset) {
320 case 0: /* TCR */
321 SET_LOW(tcr, value);
322 return;
323 case 1:
324 SET_HIGH(tcr, value);
325 return;
326 case 4: /* RCR */
327 SET_LOW(rcr, value);
328 return;
329 case 5:
330 SET_HIGH(rcr, value);
331 if (s->rcr & RCR_SOFT_RST) {
332 smc91c111_reset(DEVICE(s));
334 smc91c111_flush_queued_packets(s);
335 return;
336 case 10: case 11: /* RPCR */
337 /* Ignored */
338 return;
339 case 12: case 13: /* Reserved */
340 return;
342 break;
344 case 1:
345 switch (offset) {
346 case 0: /* CONFIG */
347 SET_LOW(cr, value);
348 return;
349 case 1:
350 SET_HIGH(cr,value);
351 return;
352 case 2: case 3: /* BASE */
353 case 4: case 5: case 6: case 7: case 8: case 9: /* IA */
354 /* Not implemented. */
355 return;
356 case 10: /* Genral Purpose */
357 SET_LOW(gpr, value);
358 return;
359 case 11:
360 SET_HIGH(gpr, value);
361 return;
362 case 12: /* Control */
363 if (value & 1)
364 fprintf(stderr, "smc91c111:EEPROM store not implemented\n");
365 if (value & 2)
366 fprintf(stderr, "smc91c111:EEPROM reload not implemented\n");
367 value &= ~3;
368 SET_LOW(ctr, value);
369 return;
370 case 13:
371 SET_HIGH(ctr, value);
372 return;
374 break;
376 case 2:
377 switch (offset) {
378 case 0: /* MMU Command */
379 switch (value >> 5) {
380 case 0: /* no-op */
381 break;
382 case 1: /* Allocate for TX. */
383 s->tx_alloc = 0x80;
384 s->int_level &= ~INT_ALLOC;
385 smc91c111_update(s);
386 smc91c111_tx_alloc(s);
387 break;
388 case 2: /* Reset MMU. */
389 s->allocated = 0;
390 s->tx_fifo_len = 0;
391 s->tx_fifo_done_len = 0;
392 s->rx_fifo_len = 0;
393 s->tx_alloc = 0;
394 break;
395 case 3: /* Remove from RX FIFO. */
396 smc91c111_pop_rx_fifo(s);
397 break;
398 case 4: /* Remove from RX FIFO and release. */
399 if (s->rx_fifo_len > 0) {
400 smc91c111_release_packet(s, s->rx_fifo[0]);
402 smc91c111_pop_rx_fifo(s);
403 break;
404 case 5: /* Release. */
405 smc91c111_release_packet(s, s->packet_num);
406 break;
407 case 6: /* Add to TX FIFO. */
408 smc91c111_queue_tx(s, s->packet_num);
409 break;
410 case 7: /* Reset TX FIFO. */
411 s->tx_fifo_len = 0;
412 s->tx_fifo_done_len = 0;
413 break;
415 return;
416 case 1:
417 /* Ignore. */
418 return;
419 case 2: /* Packet Number Register */
420 s->packet_num = value;
421 return;
422 case 3: case 4: case 5:
423 /* Should be readonly, but linux writes to them anyway. Ignore. */
424 return;
425 case 6: /* Pointer */
426 SET_LOW(ptr, value);
427 return;
428 case 7:
429 SET_HIGH(ptr, value);
430 return;
431 case 8: case 9: case 10: case 11: /* Data */
433 int p;
434 int n;
436 if (s->ptr & 0x8000)
437 n = s->rx_fifo[0];
438 else
439 n = s->packet_num;
440 p = s->ptr & 0x07ff;
441 if (s->ptr & 0x4000) {
442 s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x7ff);
443 } else {
444 p += (offset & 3);
446 s->data[n][p] = value;
448 return;
449 case 12: /* Interrupt ACK. */
450 s->int_level &= ~(value & 0xd6);
451 if (value & INT_TX)
452 smc91c111_pop_tx_fifo_done(s);
453 smc91c111_update(s);
454 return;
455 case 13: /* Interrupt mask. */
456 s->int_mask = value;
457 smc91c111_update(s);
458 return;
460 break;
462 case 3:
463 switch (offset) {
464 case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:
465 /* Multicast table. */
466 /* Not implemented. */
467 return;
468 case 8: case 9: /* Management Interface. */
469 /* Not implemented. */
470 return;
471 case 12: /* Early receive. */
472 s->ercv = value & 0x1f;
473 return;
474 case 13:
475 /* Ignore. */
476 return;
478 break;
480 hw_error("smc91c111_write: Bad reg %d:%x\n", s->bank, (int)offset);
483 static uint32_t smc91c111_readb(void *opaque, hwaddr offset)
485 smc91c111_state *s = (smc91c111_state *)opaque;
487 offset = offset & 0xf;
488 if (offset == 14) {
489 return s->bank;
491 if (offset == 15)
492 return 0x33;
493 switch (s->bank) {
494 case 0:
495 switch (offset) {
496 case 0: /* TCR */
497 return s->tcr & 0xff;
498 case 1:
499 return s->tcr >> 8;
500 case 2: /* EPH Status */
501 return 0;
502 case 3:
503 return 0x40;
504 case 4: /* RCR */
505 return s->rcr & 0xff;
506 case 5:
507 return s->rcr >> 8;
508 case 6: /* Counter */
509 case 7:
510 /* Not implemented. */
511 return 0;
512 case 8: /* Memory size. */
513 return NUM_PACKETS;
514 case 9: /* Free memory available. */
516 int i;
517 int n;
518 n = 0;
519 for (i = 0; i < NUM_PACKETS; i++) {
520 if (s->allocated & (1 << i))
521 n++;
523 return n;
525 case 10: case 11: /* RPCR */
526 /* Not implemented. */
527 return 0;
528 case 12: case 13: /* Reserved */
529 return 0;
531 break;
533 case 1:
534 switch (offset) {
535 case 0: /* CONFIG */
536 return s->cr & 0xff;
537 case 1:
538 return s->cr >> 8;
539 case 2: case 3: /* BASE */
540 /* Not implemented. */
541 return 0;
542 case 4: case 5: case 6: case 7: case 8: case 9: /* IA */
543 return s->conf.macaddr.a[offset - 4];
544 case 10: /* General Purpose */
545 return s->gpr & 0xff;
546 case 11:
547 return s->gpr >> 8;
548 case 12: /* Control */
549 return s->ctr & 0xff;
550 case 13:
551 return s->ctr >> 8;
553 break;
555 case 2:
556 switch (offset) {
557 case 0: case 1: /* MMUCR Busy bit. */
558 return 0;
559 case 2: /* Packet Number. */
560 return s->packet_num;
561 case 3: /* Allocation Result. */
562 return s->tx_alloc;
563 case 4: /* TX FIFO */
564 if (s->tx_fifo_done_len == 0)
565 return 0x80;
566 else
567 return s->tx_fifo_done[0];
568 case 5: /* RX FIFO */
569 if (s->rx_fifo_len == 0)
570 return 0x80;
571 else
572 return s->rx_fifo[0];
573 case 6: /* Pointer */
574 return s->ptr & 0xff;
575 case 7:
576 return (s->ptr >> 8) & 0xf7;
577 case 8: case 9: case 10: case 11: /* Data */
579 int p;
580 int n;
582 if (s->ptr & 0x8000)
583 n = s->rx_fifo[0];
584 else
585 n = s->packet_num;
586 p = s->ptr & 0x07ff;
587 if (s->ptr & 0x4000) {
588 s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x07ff);
589 } else {
590 p += (offset & 3);
592 return s->data[n][p];
594 case 12: /* Interrupt status. */
595 return s->int_level;
596 case 13: /* Interrupt mask. */
597 return s->int_mask;
599 break;
601 case 3:
602 switch (offset) {
603 case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:
604 /* Multicast table. */
605 /* Not implemented. */
606 return 0;
607 case 8: /* Management Interface. */
608 /* Not implemented. */
609 return 0x30;
610 case 9:
611 return 0x33;
612 case 10: /* Revision. */
613 return 0x91;
614 case 11:
615 return 0x33;
616 case 12:
617 return s->ercv;
618 case 13:
619 return 0;
621 break;
623 hw_error("smc91c111_read: Bad reg %d:%x\n", s->bank, (int)offset);
624 return 0;
627 static void smc91c111_writew(void *opaque, hwaddr offset,
628 uint32_t value)
630 smc91c111_writeb(opaque, offset, value & 0xff);
631 smc91c111_writeb(opaque, offset + 1, value >> 8);
634 static void smc91c111_writel(void *opaque, hwaddr offset,
635 uint32_t value)
637 /* 32-bit writes to offset 0xc only actually write to the bank select
638 register (offset 0xe) */
639 if (offset != 0xc)
640 smc91c111_writew(opaque, offset, value & 0xffff);
641 smc91c111_writew(opaque, offset + 2, value >> 16);
644 static uint32_t smc91c111_readw(void *opaque, hwaddr offset)
646 uint32_t val;
647 val = smc91c111_readb(opaque, offset);
648 val |= smc91c111_readb(opaque, offset + 1) << 8;
649 return val;
652 static uint32_t smc91c111_readl(void *opaque, hwaddr offset)
654 uint32_t val;
655 val = smc91c111_readw(opaque, offset);
656 val |= smc91c111_readw(opaque, offset + 2) << 16;
657 return val;
660 static int smc91c111_can_receive_nc(NetClientState *nc)
662 smc91c111_state *s = qemu_get_nic_opaque(nc);
664 return smc91c111_can_receive(s);
667 static ssize_t smc91c111_receive(NetClientState *nc, const uint8_t *buf, size_t size)
669 smc91c111_state *s = qemu_get_nic_opaque(nc);
670 int status;
671 int packetsize;
672 uint32_t crc;
673 int packetnum;
674 uint8_t *p;
676 if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST))
677 return -1;
678 /* Short packets are padded with zeros. Receiving a packet
679 < 64 bytes long is considered an error condition. */
680 if (size < 64)
681 packetsize = 64;
682 else
683 packetsize = (size & ~1);
684 packetsize += 6;
685 crc = (s->rcr & RCR_STRIP_CRC) == 0;
686 if (crc)
687 packetsize += 4;
688 /* TODO: Flag overrun and receive errors. */
689 if (packetsize > 2048)
690 return -1;
691 packetnum = smc91c111_allocate_packet(s);
692 if (packetnum == 0x80)
693 return -1;
694 s->rx_fifo[s->rx_fifo_len++] = packetnum;
696 p = &s->data[packetnum][0];
697 /* ??? Multicast packets? */
698 status = 0;
699 if (size > 1518)
700 status |= RS_TOOLONG;
701 if (size & 1)
702 status |= RS_ODDFRAME;
703 *(p++) = status & 0xff;
704 *(p++) = status >> 8;
705 *(p++) = packetsize & 0xff;
706 *(p++) = packetsize >> 8;
707 memcpy(p, buf, size & ~1);
708 p += (size & ~1);
709 /* Pad short packets. */
710 if (size < 64) {
711 int pad;
713 if (size & 1)
714 *(p++) = buf[size - 1];
715 pad = 64 - size;
716 memset(p, 0, pad);
717 p += pad;
718 size = 64;
720 /* It's not clear if the CRC should go before or after the last byte in
721 odd sized packets. Linux disables the CRC, so that's no help.
722 The pictures in the documentation show the CRC aligned on a 16-bit
723 boundary before the last odd byte, so that's what we do. */
724 if (crc) {
725 crc = crc32(~0, buf, size);
726 *(p++) = crc & 0xff; crc >>= 8;
727 *(p++) = crc & 0xff; crc >>= 8;
728 *(p++) = crc & 0xff; crc >>= 8;
729 *(p++) = crc & 0xff;
731 if (size & 1) {
732 *(p++) = buf[size - 1];
733 *p = 0x60;
734 } else {
735 *(p++) = 0;
736 *p = 0x40;
738 /* TODO: Raise early RX interrupt? */
739 s->int_level |= INT_RCV;
740 smc91c111_update(s);
742 return size;
745 static const MemoryRegionOps smc91c111_mem_ops = {
746 /* The special case for 32 bit writes to 0xc means we can't just
747 * set .impl.min/max_access_size to 1, unfortunately
749 .old_mmio = {
750 .read = { smc91c111_readb, smc91c111_readw, smc91c111_readl, },
751 .write = { smc91c111_writeb, smc91c111_writew, smc91c111_writel, },
753 .endianness = DEVICE_NATIVE_ENDIAN,
756 static NetClientInfo net_smc91c111_info = {
757 .type = NET_CLIENT_OPTIONS_KIND_NIC,
758 .size = sizeof(NICState),
759 .can_receive = smc91c111_can_receive_nc,
760 .receive = smc91c111_receive,
763 static int smc91c111_init1(SysBusDevice *sbd)
765 DeviceState *dev = DEVICE(sbd);
766 smc91c111_state *s = SMC91C111(dev);
768 memory_region_init_io(&s->mmio, OBJECT(s), &smc91c111_mem_ops, s,
769 "smc91c111-mmio", 16);
770 sysbus_init_mmio(sbd, &s->mmio);
771 sysbus_init_irq(sbd, &s->irq);
772 qemu_macaddr_default_if_unset(&s->conf.macaddr);
773 s->nic = qemu_new_nic(&net_smc91c111_info, &s->conf,
774 object_get_typename(OBJECT(dev)), dev->id, s);
775 qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
776 /* ??? Save/restore. */
777 return 0;
780 static Property smc91c111_properties[] = {
781 DEFINE_NIC_PROPERTIES(smc91c111_state, conf),
782 DEFINE_PROP_END_OF_LIST(),
785 static void smc91c111_class_init(ObjectClass *klass, void *data)
787 DeviceClass *dc = DEVICE_CLASS(klass);
788 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
790 k->init = smc91c111_init1;
791 dc->reset = smc91c111_reset;
792 dc->vmsd = &vmstate_smc91c111;
793 dc->props = smc91c111_properties;
796 static const TypeInfo smc91c111_info = {
797 .name = TYPE_SMC91C111,
798 .parent = TYPE_SYS_BUS_DEVICE,
799 .instance_size = sizeof(smc91c111_state),
800 .class_init = smc91c111_class_init,
803 static void smc91c111_register_types(void)
805 type_register_static(&smc91c111_info);
808 /* Legacy helper function. Should go away when machine config files are
809 implemented. */
810 void smc91c111_init(NICInfo *nd, uint32_t base, qemu_irq irq)
812 DeviceState *dev;
813 SysBusDevice *s;
815 qemu_check_nic_model(nd, "smc91c111");
816 dev = qdev_create(NULL, TYPE_SMC91C111);
817 qdev_set_nic_properties(dev, nd);
818 qdev_init_nofail(dev);
819 s = SYS_BUS_DEVICE(dev);
820 sysbus_mmio_map(s, 0, base);
821 sysbus_connect_irq(s, 0, irq);
824 type_init(smc91c111_register_types)