util: introduce qemu_open and qemu_create with error reporting
[qemu/ar7.git] / hw / timer / imx_epit.c
blobebd58254d15fd9d8ca37bbc50592717c2a8b4a1f
1 /*
2 * IMX EPIT Timer
4 * Copyright (c) 2008 OK Labs
5 * Copyright (c) 2011 NICTA Pty Ltd
6 * Originally written by Hans Jiang
7 * Updated by Peter Chubb
8 * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
10 * This code is licensed under GPL version 2 or later. See
11 * the COPYING file in the top-level directory.
15 #include "qemu/osdep.h"
16 #include "hw/timer/imx_epit.h"
17 #include "migration/vmstate.h"
18 #include "hw/irq.h"
19 #include "hw/misc/imx_ccm.h"
20 #include "qemu/module.h"
21 #include "qemu/log.h"
23 #ifndef DEBUG_IMX_EPIT
24 #define DEBUG_IMX_EPIT 0
25 #endif
27 #define DPRINTF(fmt, args...) \
28 do { \
29 if (DEBUG_IMX_EPIT) { \
30 fprintf(stderr, "[%s]%s: " fmt , TYPE_IMX_EPIT, \
31 __func__, ##args); \
32 } \
33 } while (0)
35 static const char *imx_epit_reg_name(uint32_t reg)
37 switch (reg) {
38 case 0:
39 return "CR";
40 case 1:
41 return "SR";
42 case 2:
43 return "LR";
44 case 3:
45 return "CMP";
46 case 4:
47 return "CNT";
48 default:
49 return "[?]";
54 * Exact clock frequencies vary from board to board.
55 * These are typical.
57 static const IMXClk imx_epit_clocks[] = {
58 CLK_NONE, /* 00 disabled */
59 CLK_IPG, /* 01 ipg_clk, ~532MHz */
60 CLK_IPG_HIGH, /* 10 ipg_clk_highfreq */
61 CLK_32k, /* 11 ipg_clk_32k -- ~32kHz */
65 * Update interrupt status
67 static void imx_epit_update_int(IMXEPITState *s)
69 if (s->sr && (s->cr & CR_OCIEN) && (s->cr & CR_EN)) {
70 qemu_irq_raise(s->irq);
71 } else {
72 qemu_irq_lower(s->irq);
77 * Must be called from within a ptimer_transaction_begin/commit block
78 * for both s->timer_cmp and s->timer_reload.
80 static void imx_epit_set_freq(IMXEPITState *s)
82 uint32_t clksrc;
83 uint32_t prescaler;
85 clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, 2);
86 prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, 12);
88 s->freq = imx_ccm_get_clock_frequency(s->ccm,
89 imx_epit_clocks[clksrc]) / prescaler;
91 DPRINTF("Setting ptimer frequency to %u\n", s->freq);
93 if (s->freq) {
94 ptimer_set_freq(s->timer_reload, s->freq);
95 ptimer_set_freq(s->timer_cmp, s->freq);
99 static void imx_epit_reset(DeviceState *dev)
101 IMXEPITState *s = IMX_EPIT(dev);
104 * Soft reset doesn't touch some bits; hard reset clears them
106 s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN);
107 s->sr = 0;
108 s->lr = EPIT_TIMER_MAX;
109 s->cmp = 0;
110 s->cnt = 0;
111 ptimer_transaction_begin(s->timer_cmp);
112 ptimer_transaction_begin(s->timer_reload);
113 /* stop both timers */
114 ptimer_stop(s->timer_cmp);
115 ptimer_stop(s->timer_reload);
116 /* compute new frequency */
117 imx_epit_set_freq(s);
118 /* init both timers to EPIT_TIMER_MAX */
119 ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1);
120 ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1);
121 if (s->freq && (s->cr & CR_EN)) {
122 /* if the timer is still enabled, restart it */
123 ptimer_run(s->timer_reload, 0);
125 ptimer_transaction_commit(s->timer_cmp);
126 ptimer_transaction_commit(s->timer_reload);
129 static uint32_t imx_epit_update_count(IMXEPITState *s)
131 s->cnt = ptimer_get_count(s->timer_reload);
133 return s->cnt;
136 static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size)
138 IMXEPITState *s = IMX_EPIT(opaque);
139 uint32_t reg_value = 0;
141 switch (offset >> 2) {
142 case 0: /* Control Register */
143 reg_value = s->cr;
144 break;
146 case 1: /* Status Register */
147 reg_value = s->sr;
148 break;
150 case 2: /* LR - ticks*/
151 reg_value = s->lr;
152 break;
154 case 3: /* CMP */
155 reg_value = s->cmp;
156 break;
158 case 4: /* CNT */
159 imx_epit_update_count(s);
160 reg_value = s->cnt;
161 break;
163 default:
164 qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
165 HWADDR_PRIx "\n", TYPE_IMX_EPIT, __func__, offset);
166 break;
169 DPRINTF("(%s) = 0x%08x\n", imx_epit_reg_name(offset >> 2), reg_value);
171 return reg_value;
174 /* Must be called from ptimer_transaction_begin/commit block for s->timer_cmp */
175 static void imx_epit_reload_compare_timer(IMXEPITState *s)
177 if ((s->cr & (CR_EN | CR_OCIEN)) == (CR_EN | CR_OCIEN)) {
178 /* if the compare feature is on and timers are running */
179 uint32_t tmp = imx_epit_update_count(s);
180 uint64_t next;
181 if (tmp > s->cmp) {
182 /* It'll fire in this round of the timer */
183 next = tmp - s->cmp;
184 } else { /* catch it next time around */
185 next = tmp - s->cmp + ((s->cr & CR_RLD) ? EPIT_TIMER_MAX : s->lr);
187 ptimer_set_count(s->timer_cmp, next);
191 static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value,
192 unsigned size)
194 IMXEPITState *s = IMX_EPIT(opaque);
195 uint64_t oldcr;
197 DPRINTF("(%s, value = 0x%08x)\n", imx_epit_reg_name(offset >> 2),
198 (uint32_t)value);
200 switch (offset >> 2) {
201 case 0: /* CR */
203 oldcr = s->cr;
204 s->cr = value & 0x03ffffff;
205 if (s->cr & CR_SWR) {
206 /* handle the reset */
207 imx_epit_reset(DEVICE(s));
209 * TODO: could we 'break' here? following operations appear
210 * to duplicate the work imx_epit_reset() already did.
214 ptimer_transaction_begin(s->timer_cmp);
215 ptimer_transaction_begin(s->timer_reload);
217 if (!(s->cr & CR_SWR)) {
218 imx_epit_set_freq(s);
221 if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) {
222 if (s->cr & CR_ENMOD) {
223 if (s->cr & CR_RLD) {
224 ptimer_set_limit(s->timer_reload, s->lr, 1);
225 ptimer_set_limit(s->timer_cmp, s->lr, 1);
226 } else {
227 ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1);
228 ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1);
232 imx_epit_reload_compare_timer(s);
233 ptimer_run(s->timer_reload, 0);
234 if (s->cr & CR_OCIEN) {
235 ptimer_run(s->timer_cmp, 0);
236 } else {
237 ptimer_stop(s->timer_cmp);
239 } else if (!(s->cr & CR_EN)) {
240 /* stop both timers */
241 ptimer_stop(s->timer_reload);
242 ptimer_stop(s->timer_cmp);
243 } else if (s->cr & CR_OCIEN) {
244 if (!(oldcr & CR_OCIEN)) {
245 imx_epit_reload_compare_timer(s);
246 ptimer_run(s->timer_cmp, 0);
248 } else {
249 ptimer_stop(s->timer_cmp);
252 ptimer_transaction_commit(s->timer_cmp);
253 ptimer_transaction_commit(s->timer_reload);
254 break;
256 case 1: /* SR - ACK*/
257 /* writing 1 to OCIF clear the OCIF bit */
258 if (value & 0x01) {
259 s->sr = 0;
260 imx_epit_update_int(s);
262 break;
264 case 2: /* LR - set ticks */
265 s->lr = value;
267 ptimer_transaction_begin(s->timer_cmp);
268 ptimer_transaction_begin(s->timer_reload);
269 if (s->cr & CR_RLD) {
270 /* Also set the limit if the LRD bit is set */
271 /* If IOVW bit is set then set the timer value */
272 ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW);
273 ptimer_set_limit(s->timer_cmp, s->lr, 0);
274 } else if (s->cr & CR_IOVW) {
275 /* If IOVW bit is set then set the timer value */
276 ptimer_set_count(s->timer_reload, s->lr);
279 imx_epit_reload_compare_timer(s);
280 ptimer_transaction_commit(s->timer_cmp);
281 ptimer_transaction_commit(s->timer_reload);
282 break;
284 case 3: /* CMP */
285 s->cmp = value;
287 ptimer_transaction_begin(s->timer_cmp);
288 imx_epit_reload_compare_timer(s);
289 ptimer_transaction_commit(s->timer_cmp);
291 break;
293 default:
294 qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
295 HWADDR_PRIx "\n", TYPE_IMX_EPIT, __func__, offset);
297 break;
300 static void imx_epit_cmp(void *opaque)
302 IMXEPITState *s = IMX_EPIT(opaque);
304 DPRINTF("sr was %d\n", s->sr);
306 s->sr = 1;
307 imx_epit_update_int(s);
310 static void imx_epit_reload(void *opaque)
312 /* No action required on rollover of timer_reload */
315 static const MemoryRegionOps imx_epit_ops = {
316 .read = imx_epit_read,
317 .write = imx_epit_write,
318 .endianness = DEVICE_NATIVE_ENDIAN,
321 static const VMStateDescription vmstate_imx_timer_epit = {
322 .name = TYPE_IMX_EPIT,
323 .version_id = 2,
324 .minimum_version_id = 2,
325 .fields = (VMStateField[]) {
326 VMSTATE_UINT32(cr, IMXEPITState),
327 VMSTATE_UINT32(sr, IMXEPITState),
328 VMSTATE_UINT32(lr, IMXEPITState),
329 VMSTATE_UINT32(cmp, IMXEPITState),
330 VMSTATE_UINT32(cnt, IMXEPITState),
331 VMSTATE_UINT32(freq, IMXEPITState),
332 VMSTATE_PTIMER(timer_reload, IMXEPITState),
333 VMSTATE_PTIMER(timer_cmp, IMXEPITState),
334 VMSTATE_END_OF_LIST()
338 static void imx_epit_realize(DeviceState *dev, Error **errp)
340 IMXEPITState *s = IMX_EPIT(dev);
341 SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
343 DPRINTF("\n");
345 sysbus_init_irq(sbd, &s->irq);
346 memory_region_init_io(&s->iomem, OBJECT(s), &imx_epit_ops, s, TYPE_IMX_EPIT,
347 0x00001000);
348 sysbus_init_mmio(sbd, &s->iomem);
350 s->timer_reload = ptimer_init(imx_epit_reload, s, PTIMER_POLICY_DEFAULT);
352 s->timer_cmp = ptimer_init(imx_epit_cmp, s, PTIMER_POLICY_DEFAULT);
355 static void imx_epit_class_init(ObjectClass *klass, void *data)
357 DeviceClass *dc = DEVICE_CLASS(klass);
359 dc->realize = imx_epit_realize;
360 dc->reset = imx_epit_reset;
361 dc->vmsd = &vmstate_imx_timer_epit;
362 dc->desc = "i.MX periodic timer";
365 static const TypeInfo imx_epit_info = {
366 .name = TYPE_IMX_EPIT,
367 .parent = TYPE_SYS_BUS_DEVICE,
368 .instance_size = sizeof(IMXEPITState),
369 .class_init = imx_epit_class_init,
372 static void imx_epit_register_types(void)
374 type_register_static(&imx_epit_info);
377 type_init(imx_epit_register_types)