2 * Target definitions of errnos. These may be overridden by an
3 * architecture specific header if needed.
5 * Taken from asm-generic/errno-base.h and asm-generic/errno.h
7 #define TARGET_EPERM 1 /* Operation not permitted */
8 #define TARGET_ENOENT 2 /* No such file or directory */
9 #define TARGET_ESRCH 3 /* No such process */
10 #define TARGET_EINTR 4 /* Interrupted system call */
11 #define TARGET_EIO 5 /* I/O error */
12 #define TARGET_ENXIO 6 /* No such device or address */
13 #define TARGET_E2BIG 7 /* Argument list too long */
14 #define TARGET_ENOEXEC 8 /* TARGET_Exec format error */
15 #define TARGET_EBADF 9 /* Bad file number */
16 #define TARGET_ECHILD 10 /* No child processes */
17 #define TARGET_EAGAIN 11 /* Try again */
18 #define TARGET_ENOMEM 12 /* Out of memory */
19 #define TARGET_EACCES 13 /* Permission denied */
20 #define TARGET_EFAULT 14 /* Bad address */
21 #define TARGET_ENOTBLK 15 /* Block device required */
22 #define TARGET_EBUSY 16 /* Device or resource busy */
23 #define TARGET_EEXIST 17 /* File exists */
24 #define TARGET_EXDEV 18 /* Cross-device link */
25 #define TARGET_ENODEV 19 /* No such device */
26 #define TARGET_ENOTDIR 20 /* Not a directory */
27 #define TARGET_EISDIR 21 /* Is a directory */
28 #define TARGET_EINVAL 22 /* Invalid argument */
29 #define TARGET_ENFILE 23 /* File table overflow */
30 #define TARGET_EMFILE 24 /* Too many open files */
31 #define TARGET_ENOTTY 25 /* Not a typewriter */
32 #define TARGET_ETXTBSY 26 /* Text file busy */
33 #define TARGET_EFBIG 27 /* File too large */
34 #define TARGET_ENOSPC 28 /* No space left on device */
35 #define TARGET_ESPIPE 29 /* Illegal seek */
36 #define TARGET_EROFS 30 /* Read-only file system */
37 #define TARGET_EMLINK 31 /* Too many links */
38 #define TARGET_EPIPE 32 /* Broken pipe */
39 #define TARGET_EDOM 33 /* Math argument out of domain of func */
40 #define TARGET_ERANGE 34 /* Math result not representable */
42 #define TARGET_EDEADLK 35 /* Resource deadlock would occur */
43 #define TARGET_ENAMETOOLONG 36 /* File name too long */
44 #define TARGET_ENOLCK 37 /* No record locks available */
45 #define TARGET_ENOSYS 38 /* Function not implemented */
46 #define TARGET_ENOTEMPTY 39 /* Directory not empty */
47 #define TARGET_ELOOP 40 /* Too many symbolic links encountered */
49 #define TARGET_ENOMSG 42 /* No message of desired type */
50 #define TARGET_EIDRM 43 /* Identifier removed */
51 #define TARGET_ECHRNG 44 /* Channel number out of range */
52 #define TARGET_EL2NSYNC 45 /* Level 2 not synchronized */
53 #define TARGET_EL3HLT 46 /* Level 3 halted */
54 #define TARGET_EL3RST 47 /* Level 3 reset */
55 #define TARGET_ELNRNG 48 /* Link number out of range */
56 #define TARGET_EUNATCH 49 /* Protocol driver not attached */
57 #define TARGET_ENOCSI 50 /* No CSI structure available */
58 #define TARGET_EL2HLT 51 /* Level 2 halted */
59 #define TARGET_EBADE 52 /* Invalid exchange */
60 #define TARGET_EBADR 53 /* Invalid request descriptor */
61 #define TARGET_EXFULL 54 /* TARGET_Exchange full */
62 #define TARGET_ENOANO 55 /* No anode */
63 #define TARGET_EBADRQC 56 /* Invalid request code */
64 #define TARGET_EBADSLT 57 /* Invalid slot */
66 #define TARGET_EBFONT 59 /* Bad font file format */
67 #define TARGET_ENOSTR 60 /* Device not a stream */
68 #define TARGET_ENODATA 61 /* No data available */
69 #define TARGET_ETIME 62 /* Timer expired */
70 #define TARGET_ENOSR 63 /* Out of streams resources */
71 #define TARGET_ENONET 64 /* Machine is not on the network */
72 #define TARGET_ENOPKG 65 /* Package not installed */
73 #define TARGET_EREMOTE 66 /* Object is remote */
74 #define TARGET_ENOLINK 67 /* Link has been severed */
75 #define TARGET_EADV 68 /* Advertise error */
76 #define TARGET_ESRMNT 69 /* Srmount error */
77 #define TARGET_ECOMM 70 /* Communication error on send */
78 #define TARGET_EPROTO 71 /* Protocol error */
79 #define TARGET_EMULTIHOP 72 /* Multihop attempted */
80 #define TARGET_EDOTDOT 73 /* RFS specific error */
81 #define TARGET_EBADMSG 74 /* Not a data message */
82 #define TARGET_EOVERFLOW 75 /* Value too large for defined data type */
83 #define TARGET_ENOTUNIQ 76 /* Name not unique on network */
84 #define TARGET_EBADFD 77 /* File descriptor in bad state */
85 #define TARGET_EREMCHG 78 /* Remote address changed */
86 #define TARGET_ELIBACC 79 /* Can not access a needed shared library */
87 #define TARGET_ELIBBAD 80 /* Accessing a corrupted shared library */
88 #define TARGET_ELIBSCN 81 /* .lib section in a.out corrupted */
89 #define TARGET_ELIBMAX 82 /* Attempting to link in too many shared libraries */
90 #define TARGET_ELIBEXEC 83 /* Cannot exec a shared library directly */
91 #define TARGET_EILSEQ 84 /* Illegal byte sequence */
92 #define TARGET_ERESTART 85 /* Interrupted system call should be restarted */
93 #define TARGET_ESTRPIPE 86 /* Streams pipe error */
94 #define TARGET_EUSERS 87 /* Too many users */
95 #define TARGET_ENOTSOCK 88 /* Socket operation on non-socket */
96 #define TARGET_EDESTADDRREQ 89 /* Destination address required */
97 #define TARGET_EMSGSIZE 90 /* Message too long */
98 #define TARGET_EPROTOTYPE 91 /* Protocol wrong type for socket */
99 #define TARGET_ENOPROTOOPT 92 /* Protocol not available */
100 #define TARGET_EPROTONOSUPPORT 93 /* Protocol not supported */
101 #define TARGET_ESOCKTNOSUPPORT 94 /* Socket type not supported */
102 #define TARGET_EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
103 #define TARGET_EPFNOSUPPORT 96 /* Protocol family not supported */
104 #define TARGET_EAFNOSUPPORT 97 /* Address family not supported by protocol */
105 #define TARGET_EADDRINUSE 98 /* Address already in use */
106 #define TARGET_EADDRNOTAVAIL 99 /* Cannot assign requested address */
107 #define TARGET_ENETDOWN 100 /* Network is down */
108 #define TARGET_ENETUNREACH 101 /* Network is unreachable */
109 #define TARGET_ENETRESET 102 /* Network dropped connection because of reset */
110 #define TARGET_ECONNABORTED 103 /* Software caused connection abort */
111 #define TARGET_ECONNRESET 104 /* Connection reset by peer */
112 #define TARGET_ENOBUFS 105 /* No buffer space available */
113 #define TARGET_EISCONN 106 /* Transport endpoint is already connected */
114 #define TARGET_ENOTCONN 107 /* Transport endpoint is not connected */
115 #define TARGET_ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
116 #define TARGET_ETOOMANYREFS 109 /* Too many references: cannot splice */
117 #define TARGET_ETIMEDOUT 110 /* Connection timed out */
118 #define TARGET_ECONNREFUSED 111 /* Connection refused */
119 #define TARGET_EHOSTDOWN 112 /* Host is down */
120 #define TARGET_EHOSTUNREACH 113 /* No route to host */
121 #define TARGET_EALREADY 114 /* Operation already in progress */
122 #define TARGET_EINPROGRESS 115 /* Operation now in progress */
123 #define TARGET_ESTALE 116 /* Stale NFS file handle */
124 #define TARGET_EUCLEAN 117 /* Structure needs cleaning */
125 #define TARGET_ENOTNAM 118 /* Not a XENIX named type file */
126 #define TARGET_ENAVAIL 119 /* No XENIX semaphores available */
127 #define TARGET_EISNAM 120 /* Is a named type file */
128 #define TARGET_EREMOTEIO 121 /* Remote I/O error */
129 #define TARGET_EDQUOT 122 /* Quota exceeded */
131 #define TARGET_ENOMEDIUM 123 /* No medium found */
132 #define TARGET_EMEDIUMTYPE 124 /* Wrong medium type */
133 #define TARGET_ECANCELED 125 /* Operation Canceled */
134 #define TARGET_ENOKEY 126 /* Required key not available */
135 #define TARGET_EKEYEXPIRED 127 /* Key has expired */
136 #define TARGET_EKEYREVOKED 128 /* Key has been revoked */
137 #define TARGET_EKEYREJECTED 129 /* Key was rejected by service */
139 /* for robust mutexes */
140 #define TARGET_EOWNERDEAD 130 /* Owner died */
141 #define TARGET_ENOTRECOVERABLE 131 /* State not recoverable */
143 #define TARGET_ERFKILL 132 /* Operation not possible due to RF-kill */
144 #define TARGET_EHWPOISON 133 /* Memory page has hardware error */
146 /* QEMU internal, not visible to the guest. This is returned when a
147 * system call should be restarted, to tell the main loop that it
148 * should wind the guest PC backwards so it will re-execute the syscall
149 * after handling any pending signals. They match with the ones the guest
150 * kernel uses for the same purpose.
152 #define TARGET_ERESTARTSYS 512 /* Restart system call (if SA_RESTART) */
154 /* QEMU internal, not visible to the guest. This is returned by the
155 * do_sigreturn() code after a successful sigreturn syscall, to indicate
156 * that it has correctly set the guest registers and so the main loop
157 * should not touch them. We use the value the guest would use for
158 * ERESTART_NOINTR (which is kernel internal) to guarantee that we won't
159 * clash with a valid guest errno now or in the future.
161 #define TARGET_QEMU_ESIGRETURN 513 /* Return from signal */
