hw/parallel.c

   1 /*
   2  * QEMU Parallel PORT emulation
   3  *
   4  * Copyright (c) 2003-2005 Fabrice Bellard
   5  * Copyright (c) 2007 Marko Kohtala
   6  *
   7  * Permission is hereby granted, free of charge, to any person obtaining a copy
   8  * of this software and associated documentation files (the "Software"), to deal
   9  * in the Software without restriction, including without limitation the rights
  10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  11  * copies of the Software, and to permit persons to whom the Software is
  12  * furnished to do so, subject to the following conditions:
  13  *
  14  * The above copyright notice and this permission notice shall be included in
  15  * all copies or substantial portions of the Software.
  16  *
  17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  23  * THE SOFTWARE.
  24  */
  25 #include "hw.h"
  26 #include "char/char.h"
  27 #include "isa.h"
  28 #include "pc.h"
  29 #include "sysemu/sysemu.h"
  30
  31 //#define DEBUG_PARALLEL
  32
  33 #ifdef DEBUG_PARALLEL
  34 #define pdebug(fmt, ...) printf("pp: " fmt, ## __VA_ARGS__)
  35 #else
  36 #define pdebug(fmt, ...) ((void)0)
  37 #endif
  38
  39 #define PARA_REG_DATA 0
  40 #define PARA_REG_STS 1
  41 #define PARA_REG_CTR 2
  42 #define PARA_REG_EPP_ADDR 3
  43 #define PARA_REG_EPP_DATA 4
  44
  45 /*
  46  * These are the definitions for the Printer Status Register
  47  */
  48 #define PARA_STS_BUSY   0x80    /* Busy complement */
  49 #define PARA_STS_ACK    0x40    /* Acknowledge */
  50 #define PARA_STS_PAPER  0x20    /* Out of paper */
  51 #define PARA_STS_ONLINE 0x10    /* Online */
  52 #define PARA_STS_ERROR  0x08    /* Error complement */
  53 #define PARA_STS_TMOUT  0x01    /* EPP timeout */
  54
  55 /*
  56  * These are the definitions for the Printer Control Register
  57  */
  58 #define PARA_CTR_DIR    0x20    /* Direction (1=read, 0=write) */
  59 #define PARA_CTR_INTEN  0x10    /* IRQ Enable */
  60 #define PARA_CTR_SELECT 0x08    /* Select In complement */
  61 #define PARA_CTR_INIT   0x04    /* Initialize Printer complement */
  62 #define PARA_CTR_AUTOLF 0x02    /* Auto linefeed complement */
  63 #define PARA_CTR_STROBE 0x01    /* Strobe complement */
  64
  65 #define PARA_CTR_SIGNAL (PARA_CTR_SELECT|PARA_CTR_INIT|PARA_CTR_AUTOLF|PARA_CTR_STROBE)
  66
  67 typedef struct ParallelState {
  68     MemoryRegion iomem;
  69     uint8_t dataw;
  70     uint8_t datar;
  71     uint8_t status;
  72     uint8_t control;
  73     qemu_irq irq;
  74     int irq_pending;
  75     CharDriverState *chr;
  76     int hw_driver;
  77     int epp_timeout;
  78     uint32_t last_read_offset; /* For debugging */
  79     /* Memory-mapped interface */
  80     int it_shift;
  81 } ParallelState;
  82
  83 typedef struct ISAParallelState {
  84     ISADevice dev;
  85     uint32_t index;
  86     uint32_t iobase;
  87     uint32_t isairq;
  88     ParallelState state;
  89 } ISAParallelState;
  90
  91 static void parallel_update_irq(ParallelState *s)
  92 {
  93     if (s->irq_pending)
  94         qemu_irq_raise(s->irq);
  95     else
  96         qemu_irq_lower(s->irq);
  97 }
  98
  99 static void
 100 parallel_ioport_write_sw(void *opaque, uint32_t addr, uint32_t val)
 101 {
 102     ParallelState *s = opaque;
 103
 104     pdebug("write addr=0x%02x val=0x%02x\n", addr, val);
 105
 106     addr &= 7;
 107     switch(addr) {
 108     case PARA_REG_DATA:
 109         s->dataw = val;
 110         parallel_update_irq(s);
 111         break;
 112     case PARA_REG_CTR:
 113         val |= 0xc0;
 114         if ((val & PARA_CTR_INIT) == 0 ) {
 115             s->status = PARA_STS_BUSY;
 116             s->status |= PARA_STS_ACK;
 117             s->status |= PARA_STS_ONLINE;
 118             s->status |= PARA_STS_ERROR;
 119         }
 120         else if (val & PARA_CTR_SELECT) {
 121             if (val & PARA_CTR_STROBE) {
 122                 s->status &= ~PARA_STS_BUSY;
 123                 if ((s->control & PARA_CTR_STROBE) == 0)
 124                     qemu_chr_fe_write(s->chr, &s->dataw, 1);
 125             } else {
 126                 if (s->control & PARA_CTR_INTEN) {
 127                     s->irq_pending = 1;
 128                 }
 129             }
 130         }
 131         parallel_update_irq(s);
 132         s->control = val;
 133         break;
 134     }
 135 }
 136
 137 static void parallel_ioport_write_hw(void *opaque, uint32_t addr, uint32_t val)
 138 {
 139     ParallelState *s = opaque;
 140     uint8_t parm = val;
 141     int dir;
 142
 143     /* Sometimes programs do several writes for timing purposes on old
 144        HW. Take care not to waste time on writes that do nothing. */
 145
 146     s->last_read_offset = ~0U;
 147
 148     addr &= 7;
 149     switch(addr) {
 150     case PARA_REG_DATA:
 151         if (s->dataw == val)
 152             return;
 153         pdebug("wd%02x\n", val);
 154         qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_WRITE_DATA, &parm);
 155         s->dataw = val;
 156         break;
 157     case PARA_REG_STS:
 158         pdebug("ws%02x\n", val);
 159         if (val & PARA_STS_TMOUT)
 160             s->epp_timeout = 0;
 161         break;
 162     case PARA_REG_CTR:
 163         val |= 0xc0;
 164         if (s->control == val)
 165             return;
 166         pdebug("wc%02x\n", val);
 167
 168         if ((val & PARA_CTR_DIR) != (s->control & PARA_CTR_DIR)) {
 169             if (val & PARA_CTR_DIR) {
 170                 dir = 1;
 171             } else {
 172                 dir = 0;
 173             }
 174             qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_DATA_DIR, &dir);
 175             parm &= ~PARA_CTR_DIR;
 176         }
 177
 178         qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_WRITE_CONTROL, &parm);
 179         s->control = val;
 180         break;
 181     case PARA_REG_EPP_ADDR:
 182         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
 183             /* Controls not correct for EPP address cycle, so do nothing */
 184             pdebug("wa%02x s\n", val);
 185         else {
 186             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
 187             if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE_ADDR, &ioarg)) {
 188                 s->epp_timeout = 1;
 189                 pdebug("wa%02x t\n", val);
 190             }
 191             else
 192                 pdebug("wa%02x\n", val);
 193         }
 194         break;
 195     case PARA_REG_EPP_DATA:
 196         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
 197             /* Controls not correct for EPP data cycle, so do nothing */
 198             pdebug("we%02x s\n", val);
 199         else {
 200             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
 201             if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg)) {
 202                 s->epp_timeout = 1;
 203                 pdebug("we%02x t\n", val);
 204             }
 205             else
 206                 pdebug("we%02x\n", val);
 207         }
 208         break;
 209     }
 210 }
 211
 212 static void
 213 parallel_ioport_eppdata_write_hw2(void *opaque, uint32_t addr, uint32_t val)
 214 {
 215     ParallelState *s = opaque;
 216     uint16_t eppdata = cpu_to_le16(val);
 217     int err;
 218     struct ParallelIOArg ioarg = {
 219         .buffer = &eppdata, .count = sizeof(eppdata)
 220     };
 221     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
 222         /* Controls not correct for EPP data cycle, so do nothing */
 223         pdebug("we%04x s\n", val);
 224         return;
 225     }
 226     err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
 227     if (err) {
 228         s->epp_timeout = 1;
 229         pdebug("we%04x t\n", val);
 230     }
 231     else
 232         pdebug("we%04x\n", val);
 233 }
 234
 235 static void
 236 parallel_ioport_eppdata_write_hw4(void *opaque, uint32_t addr, uint32_t val)
 237 {
 238     ParallelState *s = opaque;
 239     uint32_t eppdata = cpu_to_le32(val);
 240     int err;
 241     struct ParallelIOArg ioarg = {
 242         .buffer = &eppdata, .count = sizeof(eppdata)
 243     };
 244     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
 245         /* Controls not correct for EPP data cycle, so do nothing */
 246         pdebug("we%08x s\n", val);
 247         return;
 248     }
 249     err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
 250     if (err) {
 251         s->epp_timeout = 1;
 252         pdebug("we%08x t\n", val);
 253     }
 254     else
 255         pdebug("we%08x\n", val);
 256 }
 257
 258 static uint32_t parallel_ioport_read_sw(void *opaque, uint32_t addr)
 259 {
 260     ParallelState *s = opaque;
 261     uint32_t ret = 0xff;
 262
 263     addr &= 7;
 264     switch(addr) {
 265     case PARA_REG_DATA:
 266         if (s->control & PARA_CTR_DIR)
 267             ret = s->datar;
 268         else
 269             ret = s->dataw;
 270         break;
 271     case PARA_REG_STS:
 272         ret = s->status;
 273         s->irq_pending = 0;
 274         if ((s->status & PARA_STS_BUSY) == 0 && (s->control & PARA_CTR_STROBE) == 0) {
 275             /* XXX Fixme: wait 5 microseconds */
 276             if (s->status & PARA_STS_ACK)
 277                 s->status &= ~PARA_STS_ACK;
 278             else {
 279                 /* XXX Fixme: wait 5 microseconds */
 280                 s->status |= PARA_STS_ACK;
 281                 s->status |= PARA_STS_BUSY;
 282             }
 283         }
 284         parallel_update_irq(s);
 285         break;
 286     case PARA_REG_CTR:
 287         ret = s->control;
 288         break;
 289     }
 290     pdebug("read addr=0x%02x val=0x%02x\n", addr, ret);
 291     return ret;
 292 }
 293
 294 static uint32_t parallel_ioport_read_hw(void *opaque, uint32_t addr)
 295 {
 296     ParallelState *s = opaque;
 297     uint8_t ret = 0xff;
 298     addr &= 7;
 299     switch(addr) {
 300     case PARA_REG_DATA:
 301         qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_DATA, &ret);
 302         if (s->last_read_offset != addr || s->datar != ret)
 303             pdebug("rd%02x\n", ret);
 304         s->datar = ret;
 305         break;
 306     case PARA_REG_STS:
 307         qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_STATUS, &ret);
 308         ret &= ~PARA_STS_TMOUT;
 309         if (s->epp_timeout)
 310             ret |= PARA_STS_TMOUT;
 311         if (s->last_read_offset != addr || s->status != ret)
 312             pdebug("rs%02x\n", ret);
 313         s->status = ret;
 314         break;
 315     case PARA_REG_CTR:
 316         /* s->control has some bits fixed to 1. It is zero only when
 317            it has not been yet written to.  */
 318         if (s->control == 0) {
 319             qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_CONTROL, &ret);
 320             if (s->last_read_offset != addr)
 321                 pdebug("rc%02x\n", ret);
 322             s->control = ret;
 323         }
 324         else {
 325             ret = s->control;
 326             if (s->last_read_offset != addr)
 327                 pdebug("rc%02x\n", ret);
 328         }
 329         break;
 330     case PARA_REG_EPP_ADDR:
 331         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT))
 332             /* Controls not correct for EPP addr cycle, so do nothing */
 333             pdebug("ra%02x s\n", ret);
 334         else {
 335             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
 336             if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ_ADDR, &ioarg)) {
 337                 s->epp_timeout = 1;
 338                 pdebug("ra%02x t\n", ret);
 339             }
 340             else
 341                 pdebug("ra%02x\n", ret);
 342         }
 343         break;
 344     case PARA_REG_EPP_DATA:
 345         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT))
 346             /* Controls not correct for EPP data cycle, so do nothing */
 347             pdebug("re%02x s\n", ret);
 348         else {
 349             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
 350             if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg)) {
 351                 s->epp_timeout = 1;
 352                 pdebug("re%02x t\n", ret);
 353             }
 354             else
 355                 pdebug("re%02x\n", ret);
 356         }
 357         break;
 358     }
 359     s->last_read_offset = addr;
 360     return ret;
 361 }
 362
 363 static uint32_t
 364 parallel_ioport_eppdata_read_hw2(void *opaque, uint32_t addr)
 365 {
 366     ParallelState *s = opaque;
 367     uint32_t ret;
 368     uint16_t eppdata = ~0;
 369     int err;
 370     struct ParallelIOArg ioarg = {
 371         .buffer = &eppdata, .count = sizeof(eppdata)
 372     };
 373     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
 374         /* Controls not correct for EPP data cycle, so do nothing */
 375         pdebug("re%04x s\n", eppdata);
 376         return eppdata;
 377     }
 378     err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
 379     ret = le16_to_cpu(eppdata);
 380
 381     if (err) {
 382         s->epp_timeout = 1;
 383         pdebug("re%04x t\n", ret);
 384     }
 385     else
 386         pdebug("re%04x\n", ret);
 387     return ret;
 388 }
 389
 390 static uint32_t
 391 parallel_ioport_eppdata_read_hw4(void *opaque, uint32_t addr)
 392 {
 393     ParallelState *s = opaque;
 394     uint32_t ret;
 395     uint32_t eppdata = ~0U;
 396     int err;
 397     struct ParallelIOArg ioarg = {
 398         .buffer = &eppdata, .count = sizeof(eppdata)
 399     };
 400     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
 401         /* Controls not correct for EPP data cycle, so do nothing */
 402         pdebug("re%08x s\n", eppdata);
 403         return eppdata;
 404     }
 405     err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
 406     ret = le32_to_cpu(eppdata);
 407
 408     if (err) {
 409         s->epp_timeout = 1;
 410         pdebug("re%08x t\n", ret);
 411     }
 412     else
 413         pdebug("re%08x\n", ret);
 414     return ret;
 415 }
 416
 417 static void parallel_ioport_ecp_write(void *opaque, uint32_t addr, uint32_t val)
 418 {
 419     pdebug("wecp%d=%02x\n", addr & 7, val);
 420 }
 421
 422 static uint32_t parallel_ioport_ecp_read(void *opaque, uint32_t addr)
 423 {
 424     uint8_t ret = 0xff;
 425
 426     pdebug("recp%d:%02x\n", addr & 7, ret);
 427     return ret;
 428 }
 429
 430 static void parallel_reset(void *opaque)
 431 {
 432     ParallelState *s = opaque;
 433
 434     s->datar = ~0;
 435     s->dataw = ~0;
 436     s->status = PARA_STS_BUSY;
 437     s->status |= PARA_STS_ACK;
 438     s->status |= PARA_STS_ONLINE;
 439     s->status |= PARA_STS_ERROR;
 440     s->status |= PARA_STS_TMOUT;
 441     s->control = PARA_CTR_SELECT;
 442     s->control |= PARA_CTR_INIT;
 443     s->control |= 0xc0;
 444     s->irq_pending = 0;
 445     s->hw_driver = 0;
 446     s->epp_timeout = 0;
 447     s->last_read_offset = ~0U;
 448 }
 449
 450 static const int isa_parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
 451
 452 static const MemoryRegionPortio isa_parallel_portio_hw_list[] = {
 453     { 0, 8, 1,
 454       .read = parallel_ioport_read_hw,
 455       .write = parallel_ioport_write_hw },
 456     { 4, 1, 2,
 457       .read = parallel_ioport_eppdata_read_hw2,
 458       .write = parallel_ioport_eppdata_write_hw2 },
 459     { 4, 1, 4,
 460       .read = parallel_ioport_eppdata_read_hw4,
 461       .write = parallel_ioport_eppdata_write_hw4 },
 462     { 0x400, 8, 1,
 463       .read = parallel_ioport_ecp_read,
 464       .write = parallel_ioport_ecp_write },
 465     PORTIO_END_OF_LIST(),
 466 };
 467
 468 static const MemoryRegionPortio isa_parallel_portio_sw_list[] = {
 469     { 0, 8, 1,
 470       .read = parallel_ioport_read_sw,
 471       .write = parallel_ioport_write_sw },
 472     PORTIO_END_OF_LIST(),
 473 };
 474
 475 static int parallel_isa_initfn(ISADevice *dev)
 476 {
 477     static int index;
 478     ISAParallelState *isa = DO_UPCAST(ISAParallelState, dev, dev);
 479     ParallelState *s = &isa->state;
 480     int base;
 481     uint8_t dummy;
 482
 483     if (!s->chr) {
 484         fprintf(stderr, "Can't create parallel device, empty char device\n");
 485         exit(1);
 486     }
 487
 488     if (isa->index == -1)
 489         isa->index = index;
 490     if (isa->index >= MAX_PARALLEL_PORTS)
 491         return -1;
 492     if (isa->iobase == -1)
 493         isa->iobase = isa_parallel_io[isa->index];
 494     index++;
 495
 496     base = isa->iobase;
 497     isa_init_irq(dev, &s->irq, isa->isairq);
 498     qemu_register_reset(parallel_reset, s);
 499
 500     if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_STATUS, &dummy) == 0) {
 501         s->hw_driver = 1;
 502         s->status = dummy;
 503     }
 504
 505     isa_register_portio_list(dev, base,
 506                              (s->hw_driver
 507                               ? &isa_parallel_portio_hw_list[0]
 508                               : &isa_parallel_portio_sw_list[0]),
 509                              s, "parallel");
 510     return 0;
 511 }
 512
 513 /* Memory mapped interface */
 514 static uint32_t parallel_mm_readb (void *opaque, hwaddr addr)
 515 {
 516     ParallelState *s = opaque;
 517
 518     return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFF;
 519 }
 520
 521 static void parallel_mm_writeb (void *opaque,
 522                                 hwaddr addr, uint32_t value)
 523 {
 524     ParallelState *s = opaque;
 525
 526     parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFF);
 527 }
 528
 529 static uint32_t parallel_mm_readw (void *opaque, hwaddr addr)
 530 {
 531     ParallelState *s = opaque;
 532
 533     return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFFFF;
 534 }
 535
 536 static void parallel_mm_writew (void *opaque,
 537                                 hwaddr addr, uint32_t value)
 538 {
 539     ParallelState *s = opaque;
 540
 541     parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFFFF);
 542 }
 543
 544 static uint32_t parallel_mm_readl (void *opaque, hwaddr addr)
 545 {
 546     ParallelState *s = opaque;
 547
 548     return parallel_ioport_read_sw(s, addr >> s->it_shift);
 549 }
 550
 551 static void parallel_mm_writel (void *opaque,
 552                                 hwaddr addr, uint32_t value)
 553 {
 554     ParallelState *s = opaque;
 555
 556     parallel_ioport_write_sw(s, addr >> s->it_shift, value);
 557 }
 558
 559 static const MemoryRegionOps parallel_mm_ops = {
 560     .old_mmio = {
 561         .read = { parallel_mm_readb, parallel_mm_readw, parallel_mm_readl },
 562         .write = { parallel_mm_writeb, parallel_mm_writew, parallel_mm_writel },
 563     },
 564     .endianness = DEVICE_NATIVE_ENDIAN,
 565 };
 566
 567 /* If fd is zero, it means that the parallel device uses the console */
 568 bool parallel_mm_init(MemoryRegion *address_space,
 569                       hwaddr base, int it_shift, qemu_irq irq,
 570                       CharDriverState *chr)
 571 {
 572     ParallelState *s;
 573
 574     s = g_malloc0(sizeof(ParallelState));
 575     s->irq = irq;
 576     s->chr = chr;
 577     s->it_shift = it_shift;
 578     qemu_register_reset(parallel_reset, s);
 579
 580     memory_region_init_io(&s->iomem, &parallel_mm_ops, s,
 581                           "parallel", 8 << it_shift);
 582     memory_region_add_subregion(address_space, base, &s->iomem);
 583     return true;
 584 }
 585
 586 static Property parallel_isa_properties[] = {
 587     DEFINE_PROP_UINT32("index", ISAParallelState, index,   -1),
 588     DEFINE_PROP_HEX32("iobase", ISAParallelState, iobase,  -1),
 589     DEFINE_PROP_UINT32("irq",   ISAParallelState, isairq,  7),
 590     DEFINE_PROP_CHR("chardev",  ISAParallelState, state.chr),
 591     DEFINE_PROP_END_OF_LIST(),
 592 };
 593
 594 static void parallel_isa_class_initfn(ObjectClass *klass, void *data)
 595 {
 596     DeviceClass *dc = DEVICE_CLASS(klass);
 597     ISADeviceClass *ic = ISA_DEVICE_CLASS(klass);
 598     ic->init = parallel_isa_initfn;
 599     dc->props = parallel_isa_properties;
 600 }
 601
 602 static const TypeInfo parallel_isa_info = {
 603     .name          = "isa-parallel",
 604     .parent        = TYPE_ISA_DEVICE,
 605     .instance_size = sizeof(ISAParallelState),
 606     .class_init    = parallel_isa_class_initfn,
 607 };
 608
 609 static void parallel_register_types(void)
 610 {
 611     type_register_static(&parallel_isa_info);
 612 }
 613
 614 type_init(parallel_register_types)