include/hw/intc/arm_gicv3_common.h

   1 /*
   2  * ARM GIC support
   3  *
   4  * Copyright (c) 2012 Linaro Limited
   5  * Copyright (c) 2015 Huawei.
   6  * Copyright (c) 2015 Samsung Electronics Co., Ltd.
   7  * Written by Peter Maydell
   8  * Reworked for GICv3 by Shlomo Pongratz and Pavel Fedin
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation, either version 2 of the License, or
  13  * (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License along
  21  * with this program; if not, see <http://www.gnu.org/licenses/>.
  22  */
  23
  24 #ifndef HW_ARM_GICV3_COMMON_H
  25 #define HW_ARM_GICV3_COMMON_H
  26
  27 #include "hw/sysbus.h"
  28 #include "hw/intc/arm_gic_common.h"
  29
  30 /*
  31  * Maximum number of possible interrupts, determined by the GIC architecture.
  32  * Note that this does not include LPIs. When implemented, these should be
  33  * dealt with separately.
  34  */
  35 #define GICV3_MAXIRQ 1020
  36 #define GICV3_MAXSPI (GICV3_MAXIRQ - GIC_INTERNAL)
  37
  38 #define GICV3_REDIST_SIZE 0x20000
  39
  40 /* Number of SGI target-list bits */
  41 #define GICV3_TARGETLIST_BITS 16
  42
  43 /* Maximum number of list registers (architectural limit) */
  44 #define GICV3_LR_MAX 16
  45
  46 /* Minimum BPR for Secure, or when security not enabled */
  47 #define GIC_MIN_BPR 0
  48 /* Minimum BPR for Nonsecure when security is enabled */
  49 #define GIC_MIN_BPR_NS (GIC_MIN_BPR + 1)
  50
  51 /* For some distributor fields we want to model the array of 32-bit
  52  * register values which hold various bitmaps corresponding to enabled,
  53  * pending, etc bits. These macros and functions facilitate that; the
  54  * APIs are generally modelled on the generic bitmap.h functions
  55  * (which are unsuitable here because they use 'unsigned long' as the
  56  * underlying storage type, which is very awkward when you need to
  57  * access the data as 32-bit values.)
  58  * Each bitmap contains a bit for each interrupt. Although there is
  59  * space for the PPIs and SGIs, those bits (the first 32) are never
  60  * used as that state lives in the redistributor. The unused bits are
  61  * provided purely so that interrupt X's state is always in bit X; this
  62  * avoids bugs where we forget to subtract GIC_INTERNAL from an
  63  * interrupt number.
  64  */
  65 #define GICV3_BMP_SIZE DIV_ROUND_UP(GICV3_MAXIRQ, 32)
  66
  67 #define GIC_DECLARE_BITMAP(name) \
  68     uint32_t name[GICV3_BMP_SIZE]
  69
  70 #define GIC_BIT_MASK(nr) (1U << ((nr) % 32))
  71 #define GIC_BIT_WORD(nr) ((nr) / 32)
  72
  73 static inline void gic_bmp_set_bit(int nr, uint32_t *addr)
  74 {
  75     uint32_t mask = GIC_BIT_MASK(nr);
  76     uint32_t *p = addr + GIC_BIT_WORD(nr);
  77
  78     *p |= mask;
  79 }
  80
  81 static inline void gic_bmp_clear_bit(int nr, uint32_t *addr)
  82 {
  83     uint32_t mask = GIC_BIT_MASK(nr);
  84     uint32_t *p = addr + GIC_BIT_WORD(nr);
  85
  86     *p &= ~mask;
  87 }
  88
  89 static inline int gic_bmp_test_bit(int nr, const uint32_t *addr)
  90 {
  91     return 1U & (addr[GIC_BIT_WORD(nr)] >> (nr & 31));
  92 }
  93
  94 static inline void gic_bmp_replace_bit(int nr, uint32_t *addr, int val)
  95 {
  96     uint32_t mask = GIC_BIT_MASK(nr);
  97     uint32_t *p = addr + GIC_BIT_WORD(nr);
  98
  99     *p &= ~mask;
 100     *p |= (val & 1U) << (nr % 32);
 101 }
 102
 103 /* Return a pointer to the 32-bit word containing the specified bit. */
 104 static inline uint32_t *gic_bmp_ptr32(uint32_t *addr, int nr)
 105 {
 106     return addr + GIC_BIT_WORD(nr);
 107 }
 108
 109 typedef struct GICv3State GICv3State;
 110 typedef struct GICv3CPUState GICv3CPUState;
 111
 112 /* Some CPU interface registers come in three flavours:
 113  * Group0, Group1 (Secure) and Group1 (NonSecure)
 114  * (where the latter two are exposed as a single banked system register).
 115  * In the state struct they are implemented as a 3-element array which
 116  * can be indexed into by the GICV3_G0, GICV3_G1 and GICV3_G1NS constants.
 117  * If the CPU doesn't support EL3 then the G1 element is unused.
 118  *
 119  * These constants are also used to communicate the group to use for
 120  * an interrupt or SGI when it is passed between the cpu interface and
 121  * the redistributor or distributor. For those purposes the receiving end
 122  * must be prepared to cope with a Group 1 Secure interrupt even if it does
 123  * not have security support enabled, because security can be disabled
 124  * independently in the CPU and in the GIC. In that case the receiver should
 125  * treat an incoming Group 1 Secure interrupt as if it were Group 0.
 126  * (This architectural requirement is why the _G1 element is the unused one
 127  * in a no-EL3 CPU:  we would otherwise have to translate back and forth
 128  * between (G0, G1NS) from the distributor and (G0, G1) in the CPU i/f.)
 129  */
 130 #define GICV3_G0 0
 131 #define GICV3_G1 1
 132 #define GICV3_G1NS 2
 133
 134 /* ICC_CTLR_EL1, GICD_STATUSR and GICR_STATUSR are banked but not
 135  * group-related, so those indices are just 0 for S and 1 for NS.
 136  * (If the CPU or the GIC, respectively, don't support the Security
 137  * extensions then the S element is unused.)
 138  */
 139 #define GICV3_S 0
 140 #define GICV3_NS 1
 141
 142 typedef struct {
 143     int irq;
 144     uint8_t prio;
 145     int grp;
 146 } PendingIrq;
 147
 148 struct GICv3CPUState {
 149     GICv3State *gic;
 150     CPUState *cpu;
 151     qemu_irq parent_irq;
 152     qemu_irq parent_fiq;
 153     qemu_irq parent_virq;
 154     qemu_irq parent_vfiq;
 155     qemu_irq maintenance_irq;
 156
 157     /* Redistributor */
 158     uint32_t level;                  /* Current IRQ level */
 159     /* RD_base page registers */
 160     uint32_t gicr_ctlr;
 161     uint64_t gicr_typer;
 162     uint32_t gicr_statusr[2];
 163     uint32_t gicr_waker;
 164     uint64_t gicr_propbaser;
 165     uint64_t gicr_pendbaser;
 166     /* SGI_base page registers */
 167     uint32_t gicr_igroupr0;
 168     uint32_t gicr_ienabler0;
 169     uint32_t gicr_ipendr0;
 170     uint32_t gicr_iactiver0;
 171     uint32_t edge_trigger; /* ICFGR0 and ICFGR1 even bits */
 172     uint32_t gicr_igrpmodr0;
 173     uint32_t gicr_nsacr;
 174     uint8_t gicr_ipriorityr[GIC_INTERNAL];
 175
 176     /* CPU interface */
 177     uint64_t icc_sre_el1;
 178     uint64_t icc_ctlr_el1[2];
 179     uint64_t icc_pmr_el1;
 180     uint64_t icc_bpr[3];
 181     uint64_t icc_apr[3][4];
 182     uint64_t icc_igrpen[3];
 183     uint64_t icc_ctlr_el3;
 184
 185     /* Virtualization control interface */
 186     uint64_t ich_apr[3][4]; /* ich_apr[GICV3_G1][x] never used */
 187     uint64_t ich_hcr_el2;
 188     uint64_t ich_lr_el2[GICV3_LR_MAX];
 189     uint64_t ich_vmcr_el2;
 190
 191     /* Properties of the CPU interface. These are initialized from
 192      * the settings in the CPU proper.
 193      * If the number of implemented list registers is 0 then the
 194      * virtualization support is not implemented.
 195      */
 196     int num_list_regs;
 197     int vpribits; /* number of virtual priority bits */
 198     int vprebits; /* number of virtual preemption bits */
 199
 200     /* Current highest priority pending interrupt for this CPU.
 201      * This is cached information that can be recalculated from the
 202      * real state above; it doesn't need to be migrated.
 203      */
 204     PendingIrq hppi;
 205     /* This is temporary working state, to avoid a malloc in gicv3_update() */
 206     bool seenbetter;
 207 };
 208
 209 struct GICv3State {
 210     /*< private >*/
 211     SysBusDevice parent_obj;
 212     /*< public >*/
 213
 214     MemoryRegion iomem_dist; /* Distributor */
 215     MemoryRegion *iomem_redist; /* Redistributor Regions */
 216     uint32_t *redist_region_count; /* redistributor count within each region */
 217     uint32_t nb_redist_regions; /* number of redist regions */
 218
 219     uint32_t num_cpu;
 220     uint32_t num_irq;
 221     uint32_t revision;
 222     bool security_extn;
 223     bool irq_reset_nonsecure;
 224     bool gicd_no_migration_shift_bug;
 225
 226     int dev_fd; /* kvm device fd if backed by kvm vgic support */
 227     Error *migration_blocker;
 228
 229     /* Distributor */
 230
 231     /* for a GIC with the security extensions the NS banked version of this
 232      * register is just an alias of bit 1 of the S banked version.
 233      */
 234     uint32_t gicd_ctlr;
 235     uint32_t gicd_statusr[2];
 236     GIC_DECLARE_BITMAP(group);        /* GICD_IGROUPR */
 237     GIC_DECLARE_BITMAP(grpmod);       /* GICD_IGRPMODR */
 238     GIC_DECLARE_BITMAP(enabled);      /* GICD_ISENABLER */
 239     GIC_DECLARE_BITMAP(pending);      /* GICD_ISPENDR */
 240     GIC_DECLARE_BITMAP(active);       /* GICD_ISACTIVER */
 241     GIC_DECLARE_BITMAP(level);        /* Current level */
 242     GIC_DECLARE_BITMAP(edge_trigger); /* GICD_ICFGR even bits */
 243     uint8_t gicd_ipriority[GICV3_MAXIRQ];
 244     uint64_t gicd_irouter[GICV3_MAXIRQ];
 245     /* Cached information: pointer to the cpu i/f for the CPUs specified
 246      * in the IROUTER registers
 247      */
 248     GICv3CPUState *gicd_irouter_target[GICV3_MAXIRQ];
 249     uint32_t gicd_nsacr[DIV_ROUND_UP(GICV3_MAXIRQ, 16)];
 250
 251     GICv3CPUState *cpu;
 252 };
 253
 254 #define GICV3_BITMAP_ACCESSORS(BMP)                                     \
 255     static inline void gicv3_gicd_##BMP##_set(GICv3State *s, int irq)   \
 256     {                                                                   \
 257         gic_bmp_set_bit(irq, s->BMP);                                   \
 258     }                                                                   \
 259     static inline int gicv3_gicd_##BMP##_test(GICv3State *s, int irq)   \
 260     {                                                                   \
 261         return gic_bmp_test_bit(irq, s->BMP);                           \
 262     }                                                                   \
 263     static inline void gicv3_gicd_##BMP##_clear(GICv3State *s, int irq) \
 264     {                                                                   \
 265         gic_bmp_clear_bit(irq, s->BMP);                                 \
 266     }                                                                   \
 267     static inline void gicv3_gicd_##BMP##_replace(GICv3State *s,        \
 268                                                   int irq, int value)   \
 269     {                                                                   \
 270         gic_bmp_replace_bit(irq, s->BMP, value);                        \
 271     }
 272
 273 GICV3_BITMAP_ACCESSORS(group)
 274 GICV3_BITMAP_ACCESSORS(grpmod)
 275 GICV3_BITMAP_ACCESSORS(enabled)
 276 GICV3_BITMAP_ACCESSORS(pending)
 277 GICV3_BITMAP_ACCESSORS(active)
 278 GICV3_BITMAP_ACCESSORS(level)
 279 GICV3_BITMAP_ACCESSORS(edge_trigger)
 280
 281 #define TYPE_ARM_GICV3_COMMON "arm-gicv3-common"
 282 #define ARM_GICV3_COMMON(obj) \
 283      OBJECT_CHECK(GICv3State, (obj), TYPE_ARM_GICV3_COMMON)
 284 #define ARM_GICV3_COMMON_CLASS(klass) \
 285      OBJECT_CLASS_CHECK(ARMGICv3CommonClass, (klass), TYPE_ARM_GICV3_COMMON)
 286 #define ARM_GICV3_COMMON_GET_CLASS(obj) \
 287      OBJECT_GET_CLASS(ARMGICv3CommonClass, (obj), TYPE_ARM_GICV3_COMMON)
 288
 289 typedef struct ARMGICv3CommonClass {
 290     /*< private >*/
 291     SysBusDeviceClass parent_class;
 292     /*< public >*/
 293
 294     void (*pre_save)(GICv3State *s);
 295     void (*post_load)(GICv3State *s);
 296 } ARMGICv3CommonClass;
 297
 298 void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
 299                               const MemoryRegionOps *ops, Error **errp);
 300
 301 #endif