hw/s390/css: avoid taking address members in packed structs
[qemu/ar7.git] / include / standard-headers / linux / virtio_net.h
blob260c3681d70d5eacca595764a8a6355da27cba35
1 #ifndef _LINUX_VIRTIO_NET_H
2 #define _LINUX_VIRTIO_NET_H
3 /* This header is BSD licensed so anyone can use the definitions to implement
4 * compatible drivers/servers.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. Neither the name of IBM nor the names of its contributors
15 * may be used to endorse or promote products derived from this software
16 * without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE. */
28 #include "standard-headers/linux/types.h"
29 #include "standard-headers/linux/virtio_ids.h"
30 #include "standard-headers/linux/virtio_config.h"
31 #include "standard-headers/linux/virtio_types.h"
32 #include "standard-headers/linux/if_ether.h"
34 /* The feature bitmap for virtio net */
35 #define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
36 #define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
37 #define VIRTIO_NET_F_CTRL_GUEST_OFFLOADS 2 /* Dynamic offload configuration. */
38 #define VIRTIO_NET_F_MTU 3 /* Initial MTU advice */
39 #define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
40 #define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
41 #define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
42 #define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
43 #define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
44 #define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
45 #define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
46 #define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
47 #define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
48 #define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
49 #define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
50 #define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
51 #define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
52 #define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
53 #define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
54 #define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the
55 * network */
56 #define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow
57 * Steering */
58 #define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
60 #define VIRTIO_NET_F_STANDBY 62 /* Act as standby for another device
61 * with the same MAC.
63 #define VIRTIO_NET_F_SPEED_DUPLEX 63 /* Device set linkspeed and duplex */
65 #ifndef VIRTIO_NET_NO_LEGACY
66 #define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
67 #endif /* VIRTIO_NET_NO_LEGACY */
69 #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
70 #define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */
72 struct virtio_net_config {
73 /* The config defining mac address (if VIRTIO_NET_F_MAC) */
74 uint8_t mac[ETH_ALEN];
75 /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
76 uint16_t status;
77 /* Maximum number of each of transmit and receive queues;
78 * see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ.
79 * Legal values are between 1 and 0x8000
81 uint16_t max_virtqueue_pairs;
82 /* Default maximum transmit unit advice */
83 uint16_t mtu;
85 * speed, in units of 1Mb. All values 0 to INT_MAX are legal.
86 * Any other value stands for unknown.
88 uint32_t speed;
90 * 0x00 - half duplex
91 * 0x01 - full duplex
92 * Any other value stands for unknown.
94 uint8_t duplex;
95 } QEMU_PACKED;
98 * This header comes first in the scatter-gather list. If you don't
99 * specify GSO or CSUM features, you can simply ignore the header.
101 * This is bitwise-equivalent to the legacy struct virtio_net_hdr_mrg_rxbuf,
102 * only flattened.
104 struct virtio_net_hdr_v1 {
105 #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /* Use csum_start, csum_offset */
106 #define VIRTIO_NET_HDR_F_DATA_VALID 2 /* Csum is valid */
107 uint8_t flags;
108 #define VIRTIO_NET_HDR_GSO_NONE 0 /* Not a GSO frame */
109 #define VIRTIO_NET_HDR_GSO_TCPV4 1 /* GSO frame, IPv4 TCP (TSO) */
110 #define VIRTIO_NET_HDR_GSO_UDP 3 /* GSO frame, IPv4 UDP (UFO) */
111 #define VIRTIO_NET_HDR_GSO_TCPV6 4 /* GSO frame, IPv6 TCP */
112 #define VIRTIO_NET_HDR_GSO_ECN 0x80 /* TCP has ECN set */
113 uint8_t gso_type;
114 __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
115 __virtio16 gso_size; /* Bytes to append to hdr_len per frame */
116 __virtio16 csum_start; /* Position to start checksumming from */
117 __virtio16 csum_offset; /* Offset after that to place checksum */
118 __virtio16 num_buffers; /* Number of merged rx buffers */
121 #ifndef VIRTIO_NET_NO_LEGACY
122 /* This header comes first in the scatter-gather list.
123 * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, it must
124 * be the first element of the scatter-gather list. If you don't
125 * specify GSO or CSUM features, you can simply ignore the header. */
126 struct virtio_net_hdr {
127 /* See VIRTIO_NET_HDR_F_* */
128 uint8_t flags;
129 /* See VIRTIO_NET_HDR_GSO_* */
130 uint8_t gso_type;
131 __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
132 __virtio16 gso_size; /* Bytes to append to hdr_len per frame */
133 __virtio16 csum_start; /* Position to start checksumming from */
134 __virtio16 csum_offset; /* Offset after that to place checksum */
137 /* This is the version of the header to use when the MRG_RXBUF
138 * feature has been negotiated. */
139 struct virtio_net_hdr_mrg_rxbuf {
140 struct virtio_net_hdr hdr;
141 __virtio16 num_buffers; /* Number of merged rx buffers */
143 #endif /* ...VIRTIO_NET_NO_LEGACY */
146 * Control virtqueue data structures
148 * The control virtqueue expects a header in the first sg entry
149 * and an ack/status response in the last entry. Data for the
150 * command goes in between.
152 struct virtio_net_ctrl_hdr {
153 uint8_t class;
154 uint8_t cmd;
155 } QEMU_PACKED;
157 typedef uint8_t virtio_net_ctrl_ack;
159 #define VIRTIO_NET_OK 0
160 #define VIRTIO_NET_ERR 1
163 * Control the RX mode, ie. promisucous, allmulti, etc...
164 * All commands require an "out" sg entry containing a 1 byte
165 * state value, zero = disable, non-zero = enable. Commands
166 * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
167 * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
169 #define VIRTIO_NET_CTRL_RX 0
170 #define VIRTIO_NET_CTRL_RX_PROMISC 0
171 #define VIRTIO_NET_CTRL_RX_ALLMULTI 1
172 #define VIRTIO_NET_CTRL_RX_ALLUNI 2
173 #define VIRTIO_NET_CTRL_RX_NOMULTI 3
174 #define VIRTIO_NET_CTRL_RX_NOUNI 4
175 #define VIRTIO_NET_CTRL_RX_NOBCAST 5
178 * Control the MAC
180 * The MAC filter table is managed by the hypervisor, the guest should
181 * assume the size is infinite. Filtering should be considered
182 * non-perfect, ie. based on hypervisor resources, the guest may
183 * received packets from sources not specified in the filter list.
185 * In addition to the class/cmd header, the TABLE_SET command requires
186 * two out scatterlists. Each contains a 4 byte count of entries followed
187 * by a concatenated byte stream of the ETH_ALEN MAC addresses. The
188 * first sg list contains unicast addresses, the second is for multicast.
189 * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
190 * is available.
192 * The ADDR_SET command requests one out scatterlist, it contains a
193 * 6 bytes MAC address. This functionality is present if the
194 * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
196 struct virtio_net_ctrl_mac {
197 __virtio32 entries;
198 uint8_t macs[][ETH_ALEN];
199 } QEMU_PACKED;
201 #define VIRTIO_NET_CTRL_MAC 1
202 #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
203 #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
206 * Control VLAN filtering
208 * The VLAN filter table is controlled via a simple ADD/DEL interface.
209 * VLAN IDs not added may be filterd by the hypervisor. Del is the
210 * opposite of add. Both commands expect an out entry containing a 2
211 * byte VLAN ID. VLAN filterting is available with the
212 * VIRTIO_NET_F_CTRL_VLAN feature bit.
214 #define VIRTIO_NET_CTRL_VLAN 2
215 #define VIRTIO_NET_CTRL_VLAN_ADD 0
216 #define VIRTIO_NET_CTRL_VLAN_DEL 1
219 * Control link announce acknowledgement
221 * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that
222 * driver has recevied the notification; device would clear the
223 * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives
224 * this command.
226 #define VIRTIO_NET_CTRL_ANNOUNCE 3
227 #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0
230 * Control Receive Flow Steering
232 * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET
233 * enables Receive Flow Steering, specifying the number of the transmit and
234 * receive queues that will be used. After the command is consumed and acked by
235 * the device, the device will not steer new packets on receive virtqueues
236 * other than specified nor read from transmit virtqueues other than specified.
237 * Accordingly, driver should not transmit new packets on virtqueues other than
238 * specified.
240 struct virtio_net_ctrl_mq {
241 __virtio16 virtqueue_pairs;
244 #define VIRTIO_NET_CTRL_MQ 4
245 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0
246 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
247 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
250 * Control network offloads
252 * Reconfigures the network offloads that Guest can handle.
254 * Available with the VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature bit.
256 * Command data format matches the feature bit mask exactly.
258 * See VIRTIO_NET_F_GUEST_* for the list of offloads
259 * that can be enabled/disabled.
261 #define VIRTIO_NET_CTRL_GUEST_OFFLOADS 5
262 #define VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET 0
264 #endif /* _LINUX_VIRTIO_NET_H */