2 * QTest testcase for migration
4 * Copyright (c) 2016-2018 Red Hat, Inc. and/or its affiliates
5 * based on the vhost-user-test.c that is:
6 * Copyright (c) 2014 Virtual Open Systems Sarl.
8 * This work is licensed under the terms of the GNU GPL, version 2 or later.
9 * See the COPYING file in the top-level directory.
13 #include "qemu/osdep.h"
16 #include "qapi/error.h"
17 #include "qapi/qmp/qdict.h"
18 #include "qemu/module.h"
19 #include "qemu/option.h"
20 #include "qemu/range.h"
21 #include "qemu/sockets.h"
22 #include "chardev/char.h"
23 #include "qapi/qapi-visit-sockets.h"
24 #include "qapi/qobject-input-visitor.h"
25 #include "qapi/qobject-output-visitor.h"
26 #include "crypto/tlscredspsk.h"
28 #include "migration-helpers.h"
29 #include "tests/migration/migration-test.h"
31 # include "tests/unit/crypto-tls-psk-helpers.h"
33 # include "tests/unit/crypto-tls-x509-helpers.h"
34 # endif /* CONFIG_TASN1 */
35 #endif /* CONFIG_GNUTLS */
37 /* For dirty ring test; so far only x86_64 is supported */
38 #if defined(__linux__) && defined(HOST_X86_64)
39 #include "linux/kvm.h"
42 /* TODO actually test the results and get rid of this */
43 #define qtest_qmp_discard_response(...) qobject_unref(qtest_qmp(__VA_ARGS__))
45 unsigned start_address
;
47 static bool uffd_feature_thread_id
;
49 /* A downtime where the test really should converge */
50 #define CONVERGE_DOWNTIME 1000
52 #if defined(__linux__)
53 #include <sys/syscall.h>
57 #if defined(__linux__) && defined(__NR_userfaultfd) && defined(CONFIG_EVENTFD)
58 #include <sys/eventfd.h>
59 #include <sys/ioctl.h>
60 #include <linux/userfaultfd.h>
62 static bool ufd_version_check(void)
64 struct uffdio_api api_struct
;
67 int ufd
= syscall(__NR_userfaultfd
, O_CLOEXEC
);
70 g_test_message("Skipping test: userfaultfd not available");
74 api_struct
.api
= UFFD_API
;
75 api_struct
.features
= 0;
76 if (ioctl(ufd
, UFFDIO_API
, &api_struct
)) {
77 g_test_message("Skipping test: UFFDIO_API failed");
80 uffd_feature_thread_id
= api_struct
.features
& UFFD_FEATURE_THREAD_ID
;
82 ioctl_mask
= (__u64
)1 << _UFFDIO_REGISTER
|
83 (__u64
)1 << _UFFDIO_UNREGISTER
;
84 if ((api_struct
.ioctls
& ioctl_mask
) != ioctl_mask
) {
85 g_test_message("Skipping test: Missing userfault feature");
93 static bool ufd_version_check(void)
95 g_test_message("Skipping test: Userfault not available (builtdtime)");
101 static const char *tmpfs
;
103 /* The boot file modifies memory area in [start_address, end_address)
104 * repeatedly. It outputs a 'B' at a fixed rate while it's still running.
106 #include "tests/migration/i386/a-b-bootblock.h"
107 #include "tests/migration/aarch64/a-b-kernel.h"
108 #include "tests/migration/s390x/a-b-bios.h"
110 static void init_bootfile(const char *bootpath
, void *content
, size_t len
)
112 FILE *bootfile
= fopen(bootpath
, "wb");
114 g_assert_cmpint(fwrite(content
, len
, 1, bootfile
), ==, 1);
119 * Wait for some output in the serial output file,
120 * we get an 'A' followed by an endless string of 'B's
121 * but on the destination we won't have the A.
123 static void wait_for_serial(const char *side
)
125 g_autofree
char *serialpath
= g_strdup_printf("%s/%s", tmpfs
, side
);
126 FILE *serialfile
= fopen(serialpath
, "r");
127 const char *arch
= qtest_get_arch();
128 int started
= (strcmp(side
, "src_serial") == 0 &&
129 strcmp(arch
, "ppc64") == 0) ? 0 : 1;
132 int readvalue
= fgetc(serialfile
);
135 /* SLOF prints its banner before starting test,
136 * to ignore it, mark the start of the test with '_',
137 * ignore all characters until this marker
144 fseek(serialfile
, 0, SEEK_SET
);
161 started
= (strcmp(side
, "src_serial") == 0 &&
162 strcmp(arch
, "ppc64") == 0) ? 0 : 1;
163 fseek(serialfile
, 0, SEEK_SET
);
168 fprintf(stderr
, "Unexpected %d on %s serial\n", readvalue
, side
);
169 g_assert_not_reached();
175 * It's tricky to use qemu's migration event capability with qtest,
176 * events suddenly appearing confuse the qmp()/hmp() responses.
179 static int64_t read_ram_property_int(QTestState
*who
, const char *property
)
181 QDict
*rsp_return
, *rsp_ram
;
184 rsp_return
= migrate_query_not_failed(who
);
185 if (!qdict_haskey(rsp_return
, "ram")) {
189 rsp_ram
= qdict_get_qdict(rsp_return
, "ram");
190 result
= qdict_get_try_int(rsp_ram
, property
, 0);
192 qobject_unref(rsp_return
);
196 static int64_t read_migrate_property_int(QTestState
*who
, const char *property
)
201 rsp_return
= migrate_query_not_failed(who
);
202 result
= qdict_get_try_int(rsp_return
, property
, 0);
203 qobject_unref(rsp_return
);
207 static uint64_t get_migration_pass(QTestState
*who
)
209 return read_ram_property_int(who
, "dirty-sync-count");
212 static void read_blocktime(QTestState
*who
)
216 rsp_return
= migrate_query_not_failed(who
);
217 g_assert(qdict_haskey(rsp_return
, "postcopy-blocktime"));
218 qobject_unref(rsp_return
);
221 static void wait_for_migration_pass(QTestState
*who
)
223 uint64_t initial_pass
= get_migration_pass(who
);
226 /* Wait for the 1st sync */
227 while (!got_stop
&& !initial_pass
) {
229 initial_pass
= get_migration_pass(who
);
234 pass
= get_migration_pass(who
);
235 } while (pass
== initial_pass
&& !got_stop
);
238 static void check_guests_ram(QTestState
*who
)
240 /* Our ASM test will have been incrementing one byte from each page from
241 * start_address to < end_address in order. This gives us a constraint
242 * that any page's byte should be equal or less than the previous pages
243 * byte (mod 256); and they should all be equal except for one transition
244 * at the point where we meet the incrementer. (We're running this with
245 * the guest stopped).
250 bool hit_edge
= false;
253 qtest_memread(who
, start_address
, &first_byte
, 1);
254 last_byte
= first_byte
;
256 for (address
= start_address
+ TEST_MEM_PAGE_SIZE
; address
< end_address
;
257 address
+= TEST_MEM_PAGE_SIZE
)
260 qtest_memread(who
, address
, &b
, 1);
261 if (b
!= last_byte
) {
262 if (((b
+ 1) % 256) == last_byte
&& !hit_edge
) {
263 /* This is OK, the guest stopped at the point of
264 * incrementing the previous page but didn't get
272 fprintf(stderr
, "Memory content inconsistency at %x"
273 " first_byte = %x last_byte = %x current = %x"
275 address
, first_byte
, last_byte
, b
, hit_edge
);
281 fprintf(stderr
, "and in another %d pages", bad
- 10);
286 static void cleanup(const char *filename
)
288 g_autofree
char *path
= g_strdup_printf("%s/%s", tmpfs
, filename
);
293 static char *SocketAddress_to_str(SocketAddress
*addr
)
295 switch (addr
->type
) {
296 case SOCKET_ADDRESS_TYPE_INET
:
297 return g_strdup_printf("tcp:%s:%s",
300 case SOCKET_ADDRESS_TYPE_UNIX
:
301 return g_strdup_printf("unix:%s",
302 addr
->u
.q_unix
.path
);
303 case SOCKET_ADDRESS_TYPE_FD
:
304 return g_strdup_printf("fd:%s", addr
->u
.fd
.str
);
305 case SOCKET_ADDRESS_TYPE_VSOCK
:
306 return g_strdup_printf("tcp:%s:%s",
310 return g_strdup("unknown address type");
314 static char *migrate_get_socket_address(QTestState
*who
, const char *parameter
)
318 SocketAddressList
*addrs
;
322 rsp
= migrate_query(who
);
323 object
= qdict_get(rsp
, parameter
);
325 iv
= qobject_input_visitor_new(object
);
326 visit_type_SocketAddressList(iv
, NULL
, &addrs
, &error_abort
);
329 /* we are only using a single address */
330 result
= SocketAddress_to_str(addrs
->value
);
332 qapi_free_SocketAddressList(addrs
);
337 static long long migrate_get_parameter_int(QTestState
*who
,
338 const char *parameter
)
343 rsp
= wait_command(who
, "{ 'execute': 'query-migrate-parameters' }");
344 result
= qdict_get_int(rsp
, parameter
);
349 static void migrate_check_parameter_int(QTestState
*who
, const char *parameter
,
354 result
= migrate_get_parameter_int(who
, parameter
);
355 g_assert_cmpint(result
, ==, value
);
358 static void migrate_set_parameter_int(QTestState
*who
, const char *parameter
,
364 "{ 'execute': 'migrate-set-parameters',"
365 "'arguments': { %s: %lld } }",
367 g_assert(qdict_haskey(rsp
, "return"));
369 migrate_check_parameter_int(who
, parameter
, value
);
372 static char *migrate_get_parameter_str(QTestState
*who
,
373 const char *parameter
)
378 rsp
= wait_command(who
, "{ 'execute': 'query-migrate-parameters' }");
379 result
= g_strdup(qdict_get_str(rsp
, parameter
));
384 static void migrate_check_parameter_str(QTestState
*who
, const char *parameter
,
387 g_autofree
char *result
= migrate_get_parameter_str(who
, parameter
);
388 g_assert_cmpstr(result
, ==, value
);
391 static void migrate_set_parameter_str(QTestState
*who
, const char *parameter
,
397 "{ 'execute': 'migrate-set-parameters',"
398 "'arguments': { %s: %s } }",
400 g_assert(qdict_haskey(rsp
, "return"));
402 migrate_check_parameter_str(who
, parameter
, value
);
405 static void migrate_pause(QTestState
*who
)
409 rsp
= wait_command(who
, "{ 'execute': 'migrate-pause' }");
413 static void migrate_continue(QTestState
*who
, const char *state
)
417 rsp
= wait_command(who
,
418 "{ 'execute': 'migrate-continue',"
419 " 'arguments': { 'state': %s } }",
424 static void migrate_recover(QTestState
*who
, const char *uri
)
428 rsp
= wait_command(who
,
429 "{ 'execute': 'migrate-recover', "
430 " 'id': 'recover-cmd', "
431 " 'arguments': { 'uri': %s } }",
436 static void migrate_cancel(QTestState
*who
)
440 rsp
= wait_command(who
, "{ 'execute': 'migrate_cancel' }");
444 static void migrate_set_capability(QTestState
*who
, const char *capability
,
450 "{ 'execute': 'migrate-set-capabilities',"
452 "'capabilities': [ { "
453 "'capability': %s, 'state': %i } ] } }",
455 g_assert(qdict_haskey(rsp
, "return"));
459 static void migrate_postcopy_start(QTestState
*from
, QTestState
*to
)
463 rsp
= wait_command(from
, "{ 'execute': 'migrate-start-postcopy' }");
467 qtest_qmp_eventwait(from
, "STOP");
470 qtest_qmp_eventwait(to
, "RESUME");
475 * QTEST_LOG=1 may override this. When QTEST_LOG=1, we always dump errors
476 * unconditionally, because it means the user would like to be verbose.
480 /* only launch the target process */
482 /* Use dirty ring if true; dirty logging otherwise */
484 const char *opts_source
;
485 const char *opts_target
;
488 static int test_migrate_start(QTestState
**from
, QTestState
**to
,
489 const char *uri
, MigrateStart
*args
)
491 g_autofree gchar
*arch_source
= NULL
;
492 g_autofree gchar
*arch_target
= NULL
;
493 g_autofree gchar
*cmd_source
= NULL
;
494 g_autofree gchar
*cmd_target
= NULL
;
495 const gchar
*ignore_stderr
;
496 g_autofree
char *bootpath
= NULL
;
497 g_autofree
char *shmem_opts
= NULL
;
498 g_autofree
char *shmem_path
= NULL
;
499 const char *arch
= qtest_get_arch();
500 const char *machine_opts
= NULL
;
501 const char *memory_size
;
503 if (args
->use_shmem
) {
504 if (!g_file_test("/dev/shm", G_FILE_TEST_IS_DIR
)) {
505 g_test_skip("/dev/shm is not supported");
511 bootpath
= g_strdup_printf("%s/bootsect", tmpfs
);
512 if (strcmp(arch
, "i386") == 0 || strcmp(arch
, "x86_64") == 0) {
513 /* the assembled x86 boot sector should be exactly one sector large */
514 assert(sizeof(x86_bootsect
) == 512);
515 init_bootfile(bootpath
, x86_bootsect
, sizeof(x86_bootsect
));
516 memory_size
= "150M";
517 arch_source
= g_strdup_printf("-drive file=%s,format=raw", bootpath
);
518 arch_target
= g_strdup(arch_source
);
519 start_address
= X86_TEST_MEM_START
;
520 end_address
= X86_TEST_MEM_END
;
521 } else if (g_str_equal(arch
, "s390x")) {
522 init_bootfile(bootpath
, s390x_elf
, sizeof(s390x_elf
));
523 memory_size
= "128M";
524 arch_source
= g_strdup_printf("-bios %s", bootpath
);
525 arch_target
= g_strdup(arch_source
);
526 start_address
= S390_TEST_MEM_START
;
527 end_address
= S390_TEST_MEM_END
;
528 } else if (strcmp(arch
, "ppc64") == 0) {
529 machine_opts
= "vsmt=8";
530 memory_size
= "256M";
531 start_address
= PPC_TEST_MEM_START
;
532 end_address
= PPC_TEST_MEM_END
;
533 arch_source
= g_strdup_printf("-nodefaults "
534 "-prom-env 'use-nvramrc?=true' -prom-env "
535 "'nvramrc=hex .\" _\" begin %x %x "
536 "do i c@ 1 + i c! 1000 +loop .\" B\" 0 "
537 "until'", end_address
, start_address
);
538 arch_target
= g_strdup("");
539 } else if (strcmp(arch
, "aarch64") == 0) {
540 init_bootfile(bootpath
, aarch64_kernel
, sizeof(aarch64_kernel
));
541 machine_opts
= "virt,gic-version=max";
542 memory_size
= "150M";
543 arch_source
= g_strdup_printf("-cpu max "
546 arch_target
= g_strdup(arch_source
);
547 start_address
= ARM_TEST_MEM_START
;
548 end_address
= ARM_TEST_MEM_END
;
550 g_assert(sizeof(aarch64_kernel
) <= ARM_TEST_MAX_KERNEL_SIZE
);
552 g_assert_not_reached();
555 if (!getenv("QTEST_LOG") && args
->hide_stderr
) {
556 ignore_stderr
= "2>/dev/null";
561 if (args
->use_shmem
) {
562 shmem_path
= g_strdup_printf("/dev/shm/qemu-%d", getpid());
563 shmem_opts
= g_strdup_printf(
564 "-object memory-backend-file,id=mem0,size=%s"
565 ",mem-path=%s,share=on -numa node,memdev=mem0",
566 memory_size
, shmem_path
);
569 shmem_opts
= g_strdup("");
572 cmd_source
= g_strdup_printf("-accel kvm%s -accel tcg%s%s "
573 "-name source,debug-threads=on "
575 "-serial file:%s/src_serial "
577 args
->use_dirty_ring
?
578 ",dirty-ring-size=4096" : "",
579 machine_opts
? " -machine " : "",
580 machine_opts
? machine_opts
: "",
582 arch_source
, shmem_opts
,
583 args
->opts_source
? args
->opts_source
: "",
585 if (!args
->only_target
) {
586 *from
= qtest_init(cmd_source
);
589 cmd_target
= g_strdup_printf("-accel kvm%s -accel tcg%s%s "
590 "-name target,debug-threads=on "
592 "-serial file:%s/dest_serial "
595 args
->use_dirty_ring
?
596 ",dirty-ring-size=4096" : "",
597 machine_opts
? " -machine " : "",
598 machine_opts
? machine_opts
: "",
599 memory_size
, tmpfs
, uri
,
600 arch_target
, shmem_opts
,
601 args
->opts_target
? args
->opts_target
: "",
603 *to
= qtest_init(cmd_target
);
606 * Remove shmem file immediately to avoid memory leak in test failed case.
607 * It's valid becase QEMU has already opened this file
609 if (args
->use_shmem
) {
616 static void test_migrate_end(QTestState
*from
, QTestState
*to
, bool test_dest
)
618 unsigned char dest_byte_a
, dest_byte_b
, dest_byte_c
, dest_byte_d
;
623 qtest_memread(to
, start_address
, &dest_byte_a
, 1);
625 /* Destination still running, wait for a byte to change */
627 qtest_memread(to
, start_address
, &dest_byte_b
, 1);
629 } while (dest_byte_a
== dest_byte_b
);
631 qtest_qmp_discard_response(to
, "{ 'execute' : 'stop'}");
633 /* With it stopped, check nothing changes */
634 qtest_memread(to
, start_address
, &dest_byte_c
, 1);
636 qtest_memread(to
, start_address
, &dest_byte_d
, 1);
637 g_assert_cmpint(dest_byte_c
, ==, dest_byte_d
);
639 check_guests_ram(to
);
645 cleanup("migsocket");
646 cleanup("src_serial");
647 cleanup("dest_serial");
651 struct TestMigrateTLSPSKData
{
659 test_migrate_tls_psk_start_common(QTestState
*from
,
663 struct TestMigrateTLSPSKData
*data
=
664 g_new0(struct TestMigrateTLSPSKData
, 1);
667 data
->workdir
= g_strdup_printf("%s/tlscredspsk0", tmpfs
);
668 data
->pskfile
= g_strdup_printf("%s/%s", data
->workdir
,
669 QCRYPTO_TLS_CREDS_PSKFILE
);
670 mkdir(data
->workdir
, 0700);
671 test_tls_psk_init(data
->pskfile
);
674 data
->workdiralt
= g_strdup_printf("%s/tlscredspskalt0", tmpfs
);
675 data
->pskfilealt
= g_strdup_printf("%s/%s", data
->workdiralt
,
676 QCRYPTO_TLS_CREDS_PSKFILE
);
677 mkdir(data
->workdiralt
, 0700);
678 test_tls_psk_init_alt(data
->pskfilealt
);
681 rsp
= wait_command(from
,
682 "{ 'execute': 'object-add',"
683 " 'arguments': { 'qom-type': 'tls-creds-psk',"
684 " 'id': 'tlscredspsk0',"
685 " 'endpoint': 'client',"
687 " 'username': 'qemu'} }",
691 rsp
= wait_command(to
,
692 "{ 'execute': 'object-add',"
693 " 'arguments': { 'qom-type': 'tls-creds-psk',"
694 " 'id': 'tlscredspsk0',"
695 " 'endpoint': 'server',"
697 mismatch
? data
->workdiralt
: data
->workdir
);
700 migrate_set_parameter_str(from
, "tls-creds", "tlscredspsk0");
701 migrate_set_parameter_str(to
, "tls-creds", "tlscredspsk0");
707 test_migrate_tls_psk_start_match(QTestState
*from
,
710 return test_migrate_tls_psk_start_common(from
, to
, false);
714 test_migrate_tls_psk_start_mismatch(QTestState
*from
,
717 return test_migrate_tls_psk_start_common(from
, to
, true);
721 test_migrate_tls_psk_finish(QTestState
*from
,
725 struct TestMigrateTLSPSKData
*data
= opaque
;
727 test_tls_psk_cleanup(data
->pskfile
);
728 if (data
->pskfilealt
) {
729 test_tls_psk_cleanup(data
->pskfilealt
);
731 rmdir(data
->workdir
);
732 if (data
->workdiralt
) {
733 rmdir(data
->workdiralt
);
736 g_free(data
->workdiralt
);
737 g_free(data
->pskfilealt
);
738 g_free(data
->workdir
);
739 g_free(data
->pskfile
);
752 } TestMigrateTLSX509Data
;
759 const char *certhostname
;
760 const char *certipaddr
;
761 } TestMigrateTLSX509
;
764 test_migrate_tls_x509_start_common(QTestState
*from
,
766 TestMigrateTLSX509
*args
)
768 TestMigrateTLSX509Data
*data
= g_new0(TestMigrateTLSX509Data
, 1);
771 data
->workdir
= g_strdup_printf("%s/tlscredsx5090", tmpfs
);
772 data
->keyfile
= g_strdup_printf("%s/key.pem", data
->workdir
);
774 data
->cacert
= g_strdup_printf("%s/ca-cert.pem", data
->workdir
);
775 data
->serverkey
= g_strdup_printf("%s/server-key.pem", data
->workdir
);
776 data
->servercert
= g_strdup_printf("%s/server-cert.pem", data
->workdir
);
777 if (args
->clientcert
) {
778 data
->clientkey
= g_strdup_printf("%s/client-key.pem", data
->workdir
);
779 data
->clientcert
= g_strdup_printf("%s/client-cert.pem", data
->workdir
);
782 mkdir(data
->workdir
, 0700);
784 test_tls_init(data
->keyfile
);
785 g_assert(link(data
->keyfile
, data
->serverkey
) == 0);
786 if (args
->clientcert
) {
787 g_assert(link(data
->keyfile
, data
->clientkey
) == 0);
790 TLS_ROOT_REQ_SIMPLE(cacertreq
, data
->cacert
);
791 if (args
->clientcert
) {
792 TLS_CERT_REQ_SIMPLE_CLIENT(servercertreq
, cacertreq
,
793 args
->hostileclient
?
794 QCRYPTO_TLS_TEST_CLIENT_HOSTILE_NAME
:
795 QCRYPTO_TLS_TEST_CLIENT_NAME
,
799 TLS_CERT_REQ_SIMPLE_SERVER(clientcertreq
, cacertreq
,
804 rsp
= wait_command(from
,
805 "{ 'execute': 'object-add',"
806 " 'arguments': { 'qom-type': 'tls-creds-x509',"
807 " 'id': 'tlscredsx509client0',"
808 " 'endpoint': 'client',"
810 " 'sanity-check': true,"
811 " 'verify-peer': true} }",
814 migrate_set_parameter_str(from
, "tls-creds", "tlscredsx509client0");
815 if (args
->certhostname
) {
816 migrate_set_parameter_str(from
, "tls-hostname", args
->certhostname
);
819 rsp
= wait_command(to
,
820 "{ 'execute': 'object-add',"
821 " 'arguments': { 'qom-type': 'tls-creds-x509',"
822 " 'id': 'tlscredsx509server0',"
823 " 'endpoint': 'server',"
825 " 'sanity-check': true,"
826 " 'verify-peer': %i} }",
827 data
->workdir
, args
->verifyclient
);
829 migrate_set_parameter_str(to
, "tls-creds", "tlscredsx509server0");
831 if (args
->authzclient
) {
832 rsp
= wait_command(to
,
833 "{ 'execute': 'object-add',"
834 " 'arguments': { 'qom-type': 'authz-simple',"
835 " 'id': 'tlsauthz0',"
836 " 'identity': %s} }",
837 "CN=" QCRYPTO_TLS_TEST_CLIENT_NAME
);
838 migrate_set_parameter_str(to
, "tls-authz", "tlsauthz0");
845 * The normal case: match server's cert hostname against
846 * whatever host we were telling QEMU to connect to (if any)
849 test_migrate_tls_x509_start_default_host(QTestState
*from
,
852 TestMigrateTLSX509 args
= {
853 .verifyclient
= true,
855 .certipaddr
= "127.0.0.1"
857 return test_migrate_tls_x509_start_common(from
, to
, &args
);
861 * The unusual case: the server's cert is different from
862 * the address we're telling QEMU to connect to (if any),
863 * so we must give QEMU an explicit hostname to validate
866 test_migrate_tls_x509_start_override_host(QTestState
*from
,
869 TestMigrateTLSX509 args
= {
870 .verifyclient
= true,
872 .certhostname
= "qemu.org",
874 return test_migrate_tls_x509_start_common(from
, to
, &args
);
878 * The unusual case: the server's cert is different from
879 * the address we're telling QEMU to connect to, and so we
880 * expect the client to reject the server
883 test_migrate_tls_x509_start_mismatch_host(QTestState
*from
,
886 TestMigrateTLSX509 args
= {
887 .verifyclient
= true,
889 .certipaddr
= "10.0.0.1",
891 return test_migrate_tls_x509_start_common(from
, to
, &args
);
895 test_migrate_tls_x509_start_friendly_client(QTestState
*from
,
898 TestMigrateTLSX509 args
= {
899 .verifyclient
= true,
902 .certipaddr
= "127.0.0.1",
904 return test_migrate_tls_x509_start_common(from
, to
, &args
);
908 test_migrate_tls_x509_start_hostile_client(QTestState
*from
,
911 TestMigrateTLSX509 args
= {
912 .verifyclient
= true,
914 .hostileclient
= true,
916 .certipaddr
= "127.0.0.1",
918 return test_migrate_tls_x509_start_common(from
, to
, &args
);
922 * The case with no client certificate presented,
923 * and no server verification
926 test_migrate_tls_x509_start_allow_anon_client(QTestState
*from
,
929 TestMigrateTLSX509 args
= {
930 .certipaddr
= "127.0.0.1",
932 return test_migrate_tls_x509_start_common(from
, to
, &args
);
936 * The case with no client certificate presented,
937 * and server verification rejecting
940 test_migrate_tls_x509_start_reject_anon_client(QTestState
*from
,
943 TestMigrateTLSX509 args
= {
944 .verifyclient
= true,
945 .certipaddr
= "127.0.0.1",
947 return test_migrate_tls_x509_start_common(from
, to
, &args
);
951 test_migrate_tls_x509_finish(QTestState
*from
,
955 TestMigrateTLSX509Data
*data
= opaque
;
957 test_tls_cleanup(data
->keyfile
);
958 unlink(data
->cacert
);
959 unlink(data
->servercert
);
960 unlink(data
->serverkey
);
961 unlink(data
->clientcert
);
962 unlink(data
->clientkey
);
963 rmdir(data
->workdir
);
965 g_free(data
->workdir
);
966 g_free(data
->keyfile
);
969 #endif /* CONFIG_TASN1 */
970 #endif /* CONFIG_GNUTLS */
972 static int migrate_postcopy_prepare(QTestState
**from_ptr
,
976 g_autofree
char *uri
= g_strdup_printf("unix:%s/migsocket", tmpfs
);
977 QTestState
*from
, *to
;
979 if (test_migrate_start(&from
, &to
, uri
, args
)) {
983 migrate_set_capability(from
, "postcopy-ram", true);
984 migrate_set_capability(to
, "postcopy-ram", true);
985 migrate_set_capability(to
, "postcopy-blocktime", true);
987 /* We want to pick a speed slow enough that the test completes
988 * quickly, but that it doesn't complete precopy even on a slow
989 * machine, so also set the downtime.
991 migrate_set_parameter_int(from
, "max-bandwidth", 30000000);
992 migrate_set_parameter_int(from
, "downtime-limit", 1);
994 /* Wait for the first serial output from the source */
995 wait_for_serial("src_serial");
997 migrate_qmp(from
, uri
, "{}");
999 wait_for_migration_pass(from
);
1007 static void migrate_postcopy_complete(QTestState
*from
, QTestState
*to
)
1009 wait_for_migration_complete(from
);
1011 /* Make sure we get at least one "B" on destination */
1012 wait_for_serial("dest_serial");
1014 if (uffd_feature_thread_id
) {
1018 test_migrate_end(from
, to
, true);
1021 static void test_postcopy(void)
1023 MigrateStart args
= {};
1024 QTestState
*from
, *to
;
1026 if (migrate_postcopy_prepare(&from
, &to
, &args
)) {
1029 migrate_postcopy_start(from
, to
);
1030 migrate_postcopy_complete(from
, to
);
1033 static void test_postcopy_recovery(void)
1035 MigrateStart args
= {
1036 .hide_stderr
= true,
1038 QTestState
*from
, *to
;
1039 g_autofree
char *uri
= NULL
;
1041 if (migrate_postcopy_prepare(&from
, &to
, &args
)) {
1045 /* Turn postcopy speed down, 4K/s is slow enough on any machines */
1046 migrate_set_parameter_int(from
, "max-postcopy-bandwidth", 4096);
1048 /* Now we start the postcopy */
1049 migrate_postcopy_start(from
, to
);
1052 * Wait until postcopy is really started; we can only run the
1053 * migrate-pause command during a postcopy
1055 wait_for_migration_status(from
, "postcopy-active", NULL
);
1058 * Manually stop the postcopy migration. This emulates a network
1059 * failure with the migration socket
1061 migrate_pause(from
);
1064 * Wait for destination side to reach postcopy-paused state. The
1065 * migrate-recover command can only succeed if destination machine
1066 * is in the paused state
1068 wait_for_migration_status(to
, "postcopy-paused",
1069 (const char * []) { "failed", "active",
1070 "completed", NULL
});
1073 * Create a new socket to emulate a new channel that is different
1074 * from the broken migration channel; tell the destination to
1075 * listen to the new port
1077 uri
= g_strdup_printf("unix:%s/migsocket-recover", tmpfs
);
1078 migrate_recover(to
, uri
);
1081 * Try to rebuild the migration channel using the resume flag and
1082 * the newly created channel
1084 wait_for_migration_status(from
, "postcopy-paused",
1085 (const char * []) { "failed", "active",
1086 "completed", NULL
});
1087 migrate_qmp(from
, uri
, "{'resume': true}");
1089 /* Restore the postcopy bandwidth to unlimited */
1090 migrate_set_parameter_int(from
, "max-postcopy-bandwidth", 0);
1092 migrate_postcopy_complete(from
, to
);
1095 static void test_baddest(void)
1097 MigrateStart args
= {
1100 QTestState
*from
, *to
;
1102 if (test_migrate_start(&from
, &to
, "tcp:127.0.0.1:0", &args
)) {
1105 migrate_qmp(from
, "tcp:127.0.0.1:0", "{}");
1106 wait_for_migration_fail(from
, false);
1107 test_migrate_end(from
, to
, false);
1111 * A hook that runs after the src and dst QEMUs have been
1112 * created, but before the migration is started. This can
1113 * be used to set migration parameters and capabilities.
1115 * Returns: NULL, or a pointer to opaque state to be
1116 * later passed to the TestMigrateFinishHook
1118 typedef void * (*TestMigrateStartHook
)(QTestState
*from
,
1122 * A hook that runs after the migration has finished,
1123 * regardless of whether it succeeded or failed, but
1124 * before QEMU has terminated (unless it self-terminated
1125 * due to migration error)
1127 * @opaque is a pointer to state previously returned
1128 * by the TestMigrateStartHook if any, or NULL.
1130 typedef void (*TestMigrateFinishHook
)(QTestState
*from
,
1135 /* Optional: fine tune start parameters */
1138 /* Required: the URI for the dst QEMU to listen on */
1139 const char *listen_uri
;
1142 * Optional: the URI for the src QEMU to connect to
1143 * If NULL, then it will query the dst QEMU for its actual
1144 * listening address and use that as the connect address.
1145 * This allows for dynamically picking a free TCP port.
1147 const char *connect_uri
;
1149 /* Optional: callback to run at start to set migration parameters */
1150 TestMigrateStartHook start_hook
;
1151 /* Optional: callback to run at finish to cleanup */
1152 TestMigrateFinishHook finish_hook
;
1155 * Optional: normally we expect the migration process to complete.
1157 * There can be a variety of reasons and stages in which failure
1158 * can happen during tests.
1160 * If a failure is expected to happen at time of establishing
1161 * the connection, then MIG_TEST_FAIL will indicate that the dst
1162 * QEMU is expected to stay running and accept future migration
1165 * If a failure is expected to happen while processing the
1166 * migration stream, then MIG_TEST_FAIL_DEST_QUIT_ERR will indicate
1167 * that the dst QEMU is expected to quit with non-zero exit status
1170 /* This test should succeed, the default */
1171 MIG_TEST_SUCCEED
= 0,
1172 /* This test should fail, dest qemu should keep alive */
1174 /* This test should fail, dest qemu should fail with abnormal status */
1175 MIG_TEST_FAIL_DEST_QUIT_ERR
,
1178 /* Optional: set number of migration passes to wait for */
1179 unsigned int iterations
;
1182 static void test_precopy_common(MigrateCommon
*args
)
1184 QTestState
*from
, *to
;
1185 void *data_hook
= NULL
;
1187 if (test_migrate_start(&from
, &to
, args
->listen_uri
, &args
->start
)) {
1192 * We want to pick a speed slow enough that the test completes
1193 * quickly, but that it doesn't complete precopy even on a slow
1194 * machine, so also set the downtime.
1196 /* 1 ms should make it not converge*/
1197 migrate_set_parameter_int(from
, "downtime-limit", 1);
1199 migrate_set_parameter_int(from
, "max-bandwidth", 1000000000);
1201 if (args
->start_hook
) {
1202 data_hook
= args
->start_hook(from
, to
);
1205 /* Wait for the first serial output from the source */
1206 wait_for_serial("src_serial");
1208 if (!args
->connect_uri
) {
1209 g_autofree
char *local_connect_uri
=
1210 migrate_get_socket_address(to
, "socket-address");
1211 migrate_qmp(from
, local_connect_uri
, "{}");
1213 migrate_qmp(from
, args
->connect_uri
, "{}");
1217 if (args
->result
!= MIG_TEST_SUCCEED
) {
1218 bool allow_active
= args
->result
== MIG_TEST_FAIL
;
1219 wait_for_migration_fail(from
, allow_active
);
1221 if (args
->result
== MIG_TEST_FAIL_DEST_QUIT_ERR
) {
1222 qtest_set_expected_status(to
, 1);
1225 if (args
->iterations
) {
1226 while (args
->iterations
--) {
1227 wait_for_migration_pass(from
);
1230 wait_for_migration_pass(from
);
1233 migrate_set_parameter_int(from
, "downtime-limit", CONVERGE_DOWNTIME
);
1236 qtest_qmp_eventwait(from
, "STOP");
1239 qtest_qmp_eventwait(to
, "RESUME");
1241 wait_for_serial("dest_serial");
1242 wait_for_migration_complete(from
);
1245 if (args
->finish_hook
) {
1246 args
->finish_hook(from
, to
, data_hook
);
1249 test_migrate_end(from
, to
, args
->result
== MIG_TEST_SUCCEED
);
1252 static void test_precopy_unix_plain(void)
1254 g_autofree
char *uri
= g_strdup_printf("unix:%s/migsocket", tmpfs
);
1255 MigrateCommon args
= {
1260 test_precopy_common(&args
);
1264 static void test_precopy_unix_dirty_ring(void)
1266 g_autofree
char *uri
= g_strdup_printf("unix:%s/migsocket", tmpfs
);
1267 MigrateCommon args
= {
1269 .use_dirty_ring
= true,
1275 test_precopy_common(&args
);
1278 #ifdef CONFIG_GNUTLS
1279 static void test_precopy_unix_tls_psk(void)
1281 g_autofree
char *uri
= g_strdup_printf("unix:%s/migsocket", tmpfs
);
1282 MigrateCommon args
= {
1285 .start_hook
= test_migrate_tls_psk_start_match
,
1286 .finish_hook
= test_migrate_tls_psk_finish
,
1289 test_precopy_common(&args
);
1293 static void test_precopy_unix_tls_x509_default_host(void)
1295 g_autofree
char *uri
= g_strdup_printf("unix:%s/migsocket", tmpfs
);
1296 MigrateCommon args
= {
1298 .hide_stderr
= true,
1302 .start_hook
= test_migrate_tls_x509_start_default_host
,
1303 .finish_hook
= test_migrate_tls_x509_finish
,
1304 .result
= MIG_TEST_FAIL_DEST_QUIT_ERR
,
1307 test_precopy_common(&args
);
1310 static void test_precopy_unix_tls_x509_override_host(void)
1312 g_autofree
char *uri
= g_strdup_printf("unix:%s/migsocket", tmpfs
);
1313 MigrateCommon args
= {
1316 .start_hook
= test_migrate_tls_x509_start_override_host
,
1317 .finish_hook
= test_migrate_tls_x509_finish
,
1320 test_precopy_common(&args
);
1322 #endif /* CONFIG_TASN1 */
1323 #endif /* CONFIG_GNUTLS */
1326 /* Currently upset on aarch64 TCG */
1327 static void test_ignore_shared(void)
1329 g_autofree
char *uri
= g_strdup_printf("unix:%s/migsocket", tmpfs
);
1330 QTestState
*from
, *to
;
1332 if (test_migrate_start(&from
, &to
, uri
, false, true, NULL
, NULL
)) {
1336 migrate_set_capability(from
, "x-ignore-shared", true);
1337 migrate_set_capability(to
, "x-ignore-shared", true);
1339 /* Wait for the first serial output from the source */
1340 wait_for_serial("src_serial");
1342 migrate_qmp(from
, uri
, "{}");
1344 wait_for_migration_pass(from
);
1347 qtest_qmp_eventwait(from
, "STOP");
1350 qtest_qmp_eventwait(to
, "RESUME");
1352 wait_for_serial("dest_serial");
1353 wait_for_migration_complete(from
);
1355 /* Check whether shared RAM has been really skipped */
1356 g_assert_cmpint(read_ram_property_int(from
, "transferred"), <, 1024 * 1024);
1358 test_migrate_end(from
, to
, true);
1363 test_migrate_xbzrle_start(QTestState
*from
,
1366 migrate_set_parameter_int(from
, "xbzrle-cache-size", 33554432);
1368 migrate_set_capability(from
, "xbzrle", true);
1369 migrate_set_capability(to
, "xbzrle", true);
1374 static void test_precopy_unix_xbzrle(void)
1376 g_autofree
char *uri
= g_strdup_printf("unix:%s/migsocket", tmpfs
);
1377 MigrateCommon args
= {
1381 .start_hook
= test_migrate_xbzrle_start
,
1386 test_precopy_common(&args
);
1389 static void test_precopy_tcp_plain(void)
1391 MigrateCommon args
= {
1392 .listen_uri
= "tcp:127.0.0.1:0",
1395 test_precopy_common(&args
);
1398 #ifdef CONFIG_GNUTLS
1399 static void test_precopy_tcp_tls_psk_match(void)
1401 MigrateCommon args
= {
1402 .listen_uri
= "tcp:127.0.0.1:0",
1403 .start_hook
= test_migrate_tls_psk_start_match
,
1404 .finish_hook
= test_migrate_tls_psk_finish
,
1407 test_precopy_common(&args
);
1410 static void test_precopy_tcp_tls_psk_mismatch(void)
1412 MigrateCommon args
= {
1414 .hide_stderr
= true,
1416 .listen_uri
= "tcp:127.0.0.1:0",
1417 .start_hook
= test_migrate_tls_psk_start_mismatch
,
1418 .finish_hook
= test_migrate_tls_psk_finish
,
1419 .result
= MIG_TEST_FAIL
,
1422 test_precopy_common(&args
);
1426 static void test_precopy_tcp_tls_x509_default_host(void)
1428 MigrateCommon args
= {
1429 .listen_uri
= "tcp:127.0.0.1:0",
1430 .start_hook
= test_migrate_tls_x509_start_default_host
,
1431 .finish_hook
= test_migrate_tls_x509_finish
,
1434 test_precopy_common(&args
);
1437 static void test_precopy_tcp_tls_x509_override_host(void)
1439 MigrateCommon args
= {
1440 .listen_uri
= "tcp:127.0.0.1:0",
1441 .start_hook
= test_migrate_tls_x509_start_override_host
,
1442 .finish_hook
= test_migrate_tls_x509_finish
,
1445 test_precopy_common(&args
);
1448 static void test_precopy_tcp_tls_x509_mismatch_host(void)
1450 MigrateCommon args
= {
1452 .hide_stderr
= true,
1454 .listen_uri
= "tcp:127.0.0.1:0",
1455 .start_hook
= test_migrate_tls_x509_start_mismatch_host
,
1456 .finish_hook
= test_migrate_tls_x509_finish
,
1457 .result
= MIG_TEST_FAIL_DEST_QUIT_ERR
,
1460 test_precopy_common(&args
);
1463 static void test_precopy_tcp_tls_x509_friendly_client(void)
1465 MigrateCommon args
= {
1466 .listen_uri
= "tcp:127.0.0.1:0",
1467 .start_hook
= test_migrate_tls_x509_start_friendly_client
,
1468 .finish_hook
= test_migrate_tls_x509_finish
,
1471 test_precopy_common(&args
);
1474 static void test_precopy_tcp_tls_x509_hostile_client(void)
1476 MigrateCommon args
= {
1478 .hide_stderr
= true,
1480 .listen_uri
= "tcp:127.0.0.1:0",
1481 .start_hook
= test_migrate_tls_x509_start_hostile_client
,
1482 .finish_hook
= test_migrate_tls_x509_finish
,
1483 .result
= MIG_TEST_FAIL
,
1486 test_precopy_common(&args
);
1489 static void test_precopy_tcp_tls_x509_allow_anon_client(void)
1491 MigrateCommon args
= {
1492 .listen_uri
= "tcp:127.0.0.1:0",
1493 .start_hook
= test_migrate_tls_x509_start_allow_anon_client
,
1494 .finish_hook
= test_migrate_tls_x509_finish
,
1497 test_precopy_common(&args
);
1500 static void test_precopy_tcp_tls_x509_reject_anon_client(void)
1502 MigrateCommon args
= {
1504 .hide_stderr
= true,
1506 .listen_uri
= "tcp:127.0.0.1:0",
1507 .start_hook
= test_migrate_tls_x509_start_reject_anon_client
,
1508 .finish_hook
= test_migrate_tls_x509_finish
,
1509 .result
= MIG_TEST_FAIL
,
1512 test_precopy_common(&args
);
1514 #endif /* CONFIG_TASN1 */
1515 #endif /* CONFIG_GNUTLS */
1517 static void *test_migrate_fd_start_hook(QTestState
*from
,
1524 /* Create two connected sockets for migration */
1525 ret
= socketpair(PF_LOCAL
, SOCK_STREAM
, 0, pair
);
1526 g_assert_cmpint(ret
, ==, 0);
1528 /* Send the 1st socket to the target */
1529 rsp
= wait_command_fd(to
, pair
[0],
1530 "{ 'execute': 'getfd',"
1531 " 'arguments': { 'fdname': 'fd-mig' }}");
1535 /* Start incoming migration from the 1st socket */
1536 rsp
= wait_command(to
, "{ 'execute': 'migrate-incoming',"
1537 " 'arguments': { 'uri': 'fd:fd-mig' }}");
1540 /* Send the 2nd socket to the target */
1541 rsp
= wait_command_fd(from
, pair
[1],
1542 "{ 'execute': 'getfd',"
1543 " 'arguments': { 'fdname': 'fd-mig' }}");
1550 static void test_migrate_fd_finish_hook(QTestState
*from
,
1555 const char *error_desc
;
1557 /* Test closing fds */
1558 /* We assume, that QEMU removes named fd from its list,
1559 * so this should fail */
1560 rsp
= qtest_qmp(from
, "{ 'execute': 'closefd',"
1561 " 'arguments': { 'fdname': 'fd-mig' }}");
1562 g_assert_true(qdict_haskey(rsp
, "error"));
1563 error_desc
= qdict_get_str(qdict_get_qdict(rsp
, "error"), "desc");
1564 g_assert_cmpstr(error_desc
, ==, "File descriptor named 'fd-mig' not found");
1567 rsp
= qtest_qmp(to
, "{ 'execute': 'closefd',"
1568 " 'arguments': { 'fdname': 'fd-mig' }}");
1569 g_assert_true(qdict_haskey(rsp
, "error"));
1570 error_desc
= qdict_get_str(qdict_get_qdict(rsp
, "error"), "desc");
1571 g_assert_cmpstr(error_desc
, ==, "File descriptor named 'fd-mig' not found");
1575 static void test_migrate_fd_proto(void)
1577 MigrateCommon args
= {
1578 .listen_uri
= "defer",
1579 .connect_uri
= "fd:fd-mig",
1580 .start_hook
= test_migrate_fd_start_hook
,
1581 .finish_hook
= test_migrate_fd_finish_hook
1583 test_precopy_common(&args
);
1586 static void do_test_validate_uuid(MigrateStart
*args
, bool should_fail
)
1588 g_autofree
char *uri
= g_strdup_printf("unix:%s/migsocket", tmpfs
);
1589 QTestState
*from
, *to
;
1591 if (test_migrate_start(&from
, &to
, uri
, args
)) {
1596 * UUID validation is at the begin of migration. So, the main process of
1597 * migration is not interesting for us here. Thus, set huge downtime for
1598 * very fast migration.
1600 migrate_set_parameter_int(from
, "downtime-limit", 1000000);
1601 migrate_set_capability(from
, "validate-uuid", true);
1603 /* Wait for the first serial output from the source */
1604 wait_for_serial("src_serial");
1606 migrate_qmp(from
, uri
, "{}");
1609 qtest_set_expected_status(to
, 1);
1610 wait_for_migration_fail(from
, true);
1612 wait_for_migration_complete(from
);
1615 test_migrate_end(from
, to
, false);
1618 static void test_validate_uuid(void)
1620 MigrateStart args
= {
1621 .opts_source
= "-uuid 11111111-1111-1111-1111-111111111111",
1622 .opts_target
= "-uuid 11111111-1111-1111-1111-111111111111",
1625 do_test_validate_uuid(&args
, false);
1628 static void test_validate_uuid_error(void)
1630 MigrateStart args
= {
1631 .opts_source
= "-uuid 11111111-1111-1111-1111-111111111111",
1632 .opts_target
= "-uuid 22222222-2222-2222-2222-222222222222",
1633 .hide_stderr
= true,
1636 do_test_validate_uuid(&args
, true);
1639 static void test_validate_uuid_src_not_set(void)
1641 MigrateStart args
= {
1642 .opts_target
= "-uuid 22222222-2222-2222-2222-222222222222",
1643 .hide_stderr
= true,
1646 do_test_validate_uuid(&args
, false);
1649 static void test_validate_uuid_dst_not_set(void)
1651 MigrateStart args
= {
1652 .opts_source
= "-uuid 11111111-1111-1111-1111-111111111111",
1653 .hide_stderr
= true,
1656 do_test_validate_uuid(&args
, false);
1659 static void test_migrate_auto_converge(void)
1661 g_autofree
char *uri
= g_strdup_printf("unix:%s/migsocket", tmpfs
);
1662 MigrateStart args
= {};
1663 QTestState
*from
, *to
;
1664 int64_t remaining
, percentage
;
1667 * We want the test to be stable and as fast as possible.
1668 * E.g., with 1Gb/s bandwith migration may pass without throttling,
1669 * so we need to decrease a bandwidth.
1671 const int64_t init_pct
= 5, inc_pct
= 50, max_pct
= 95;
1672 const int64_t max_bandwidth
= 400000000; /* ~400Mb/s */
1673 const int64_t downtime_limit
= 250; /* 250ms */
1675 * We migrate through unix-socket (> 500Mb/s).
1676 * Thus, expected migration speed ~= bandwidth limit (< 500Mb/s).
1677 * So, we can predict expected_threshold
1679 const int64_t expected_threshold
= max_bandwidth
* downtime_limit
/ 1000;
1681 if (test_migrate_start(&from
, &to
, uri
, &args
)) {
1685 migrate_set_capability(from
, "auto-converge", true);
1686 migrate_set_parameter_int(from
, "cpu-throttle-initial", init_pct
);
1687 migrate_set_parameter_int(from
, "cpu-throttle-increment", inc_pct
);
1688 migrate_set_parameter_int(from
, "max-cpu-throttle", max_pct
);
1691 * Set the initial parameters so that the migration could not converge
1692 * without throttling.
1694 migrate_set_parameter_int(from
, "downtime-limit", 1);
1695 migrate_set_parameter_int(from
, "max-bandwidth", 100000000); /* ~100Mb/s */
1697 /* To check remaining size after precopy */
1698 migrate_set_capability(from
, "pause-before-switchover", true);
1700 /* Wait for the first serial output from the source */
1701 wait_for_serial("src_serial");
1703 migrate_qmp(from
, uri
, "{}");
1705 /* Wait for throttling begins */
1707 while (percentage
== 0) {
1708 percentage
= read_migrate_property_int(from
, "cpu-throttle-percentage");
1710 g_assert_false(got_stop
);
1712 /* The first percentage of throttling should be equal to init_pct */
1713 g_assert_cmpint(percentage
, ==, init_pct
);
1714 /* Now, when we tested that throttling works, let it converge */
1715 migrate_set_parameter_int(from
, "downtime-limit", downtime_limit
);
1716 migrate_set_parameter_int(from
, "max-bandwidth", max_bandwidth
);
1719 * Wait for pre-switchover status to check last throttle percentage
1720 * and remaining. These values will be zeroed later
1722 wait_for_migration_status(from
, "pre-switchover", NULL
);
1724 /* The final percentage of throttling shouldn't be greater than max_pct */
1725 percentage
= read_migrate_property_int(from
, "cpu-throttle-percentage");
1726 g_assert_cmpint(percentage
, <=, max_pct
);
1728 remaining
= read_ram_property_int(from
, "remaining");
1729 g_assert_cmpint(remaining
, <,
1730 (expected_threshold
+ expected_threshold
/ 100));
1732 migrate_continue(from
, "pre-switchover");
1734 qtest_qmp_eventwait(to
, "RESUME");
1736 wait_for_serial("dest_serial");
1737 wait_for_migration_complete(from
);
1740 test_migrate_end(from
, to
, true);
1744 test_migrate_precopy_tcp_multifd_start_common(QTestState
*from
,
1750 migrate_set_parameter_int(from
, "multifd-channels", 16);
1751 migrate_set_parameter_int(to
, "multifd-channels", 16);
1753 migrate_set_parameter_str(from
, "multifd-compression", method
);
1754 migrate_set_parameter_str(to
, "multifd-compression", method
);
1756 migrate_set_capability(from
, "multifd", true);
1757 migrate_set_capability(to
, "multifd", true);
1759 /* Start incoming migration from the 1st socket */
1760 rsp
= wait_command(to
, "{ 'execute': 'migrate-incoming',"
1761 " 'arguments': { 'uri': 'tcp:127.0.0.1:0' }}");
1768 test_migrate_precopy_tcp_multifd_start(QTestState
*from
,
1771 return test_migrate_precopy_tcp_multifd_start_common(from
, to
, "none");
1775 test_migrate_precopy_tcp_multifd_zlib_start(QTestState
*from
,
1778 return test_migrate_precopy_tcp_multifd_start_common(from
, to
, "zlib");
1783 test_migrate_precopy_tcp_multifd_zstd_start(QTestState
*from
,
1786 return test_migrate_precopy_tcp_multifd_start_common(from
, to
, "zstd");
1788 #endif /* CONFIG_ZSTD */
1790 static void test_multifd_tcp_none(void)
1792 MigrateCommon args
= {
1793 .listen_uri
= "defer",
1794 .start_hook
= test_migrate_precopy_tcp_multifd_start
,
1796 test_precopy_common(&args
);
1799 static void test_multifd_tcp_zlib(void)
1801 MigrateCommon args
= {
1802 .listen_uri
= "defer",
1803 .start_hook
= test_migrate_precopy_tcp_multifd_zlib_start
,
1805 test_precopy_common(&args
);
1809 static void test_multifd_tcp_zstd(void)
1811 MigrateCommon args
= {
1812 .listen_uri
= "defer",
1813 .start_hook
= test_migrate_precopy_tcp_multifd_zstd_start
,
1815 test_precopy_common(&args
);
1819 #ifdef CONFIG_GNUTLS
1821 test_migrate_multifd_tcp_tls_psk_start_match(QTestState
*from
,
1824 test_migrate_precopy_tcp_multifd_start_common(from
, to
, "none");
1825 return test_migrate_tls_psk_start_match(from
, to
);
1829 test_migrate_multifd_tcp_tls_psk_start_mismatch(QTestState
*from
,
1832 test_migrate_precopy_tcp_multifd_start_common(from
, to
, "none");
1833 return test_migrate_tls_psk_start_mismatch(from
, to
);
1838 test_migrate_multifd_tls_x509_start_default_host(QTestState
*from
,
1841 test_migrate_precopy_tcp_multifd_start_common(from
, to
, "none");
1842 return test_migrate_tls_x509_start_default_host(from
, to
);
1846 test_migrate_multifd_tls_x509_start_override_host(QTestState
*from
,
1849 test_migrate_precopy_tcp_multifd_start_common(from
, to
, "none");
1850 return test_migrate_tls_x509_start_override_host(from
, to
);
1854 test_migrate_multifd_tls_x509_start_mismatch_host(QTestState
*from
,
1857 test_migrate_precopy_tcp_multifd_start_common(from
, to
, "none");
1858 return test_migrate_tls_x509_start_mismatch_host(from
, to
);
1862 test_migrate_multifd_tls_x509_start_allow_anon_client(QTestState
*from
,
1865 test_migrate_precopy_tcp_multifd_start_common(from
, to
, "none");
1866 return test_migrate_tls_x509_start_allow_anon_client(from
, to
);
1870 test_migrate_multifd_tls_x509_start_reject_anon_client(QTestState
*from
,
1873 test_migrate_precopy_tcp_multifd_start_common(from
, to
, "none");
1874 return test_migrate_tls_x509_start_reject_anon_client(from
, to
);
1876 #endif /* CONFIG_TASN1 */
1878 static void test_multifd_tcp_tls_psk_match(void)
1880 MigrateCommon args
= {
1881 .listen_uri
= "defer",
1882 .start_hook
= test_migrate_multifd_tcp_tls_psk_start_match
,
1883 .finish_hook
= test_migrate_tls_psk_finish
,
1885 test_precopy_common(&args
);
1888 static void test_multifd_tcp_tls_psk_mismatch(void)
1890 MigrateCommon args
= {
1892 .hide_stderr
= true,
1894 .listen_uri
= "defer",
1895 .start_hook
= test_migrate_multifd_tcp_tls_psk_start_mismatch
,
1896 .finish_hook
= test_migrate_tls_psk_finish
,
1897 .result
= MIG_TEST_FAIL
,
1899 test_precopy_common(&args
);
1903 static void test_multifd_tcp_tls_x509_default_host(void)
1905 MigrateCommon args
= {
1906 .listen_uri
= "defer",
1907 .start_hook
= test_migrate_multifd_tls_x509_start_default_host
,
1908 .finish_hook
= test_migrate_tls_x509_finish
,
1910 test_precopy_common(&args
);
1913 static void test_multifd_tcp_tls_x509_override_host(void)
1915 MigrateCommon args
= {
1916 .listen_uri
= "defer",
1917 .start_hook
= test_migrate_multifd_tls_x509_start_override_host
,
1918 .finish_hook
= test_migrate_tls_x509_finish
,
1920 test_precopy_common(&args
);
1923 static void test_multifd_tcp_tls_x509_mismatch_host(void)
1926 * This has different behaviour to the non-multifd case.
1928 * In non-multifd case when client aborts due to mismatched
1929 * cert host, the server has already started trying to load
1930 * migration state, and so it exits with I/O failure.
1932 * In multifd case when client aborts due to mismatched
1933 * cert host, the server is still waiting for the other
1934 * multifd connections to arrive so hasn't started trying
1935 * to load migration state, and thus just aborts the migration
1938 MigrateCommon args
= {
1940 .hide_stderr
= true,
1942 .listen_uri
= "defer",
1943 .start_hook
= test_migrate_multifd_tls_x509_start_mismatch_host
,
1944 .finish_hook
= test_migrate_tls_x509_finish
,
1945 .result
= MIG_TEST_FAIL
,
1947 test_precopy_common(&args
);
1950 static void test_multifd_tcp_tls_x509_allow_anon_client(void)
1952 MigrateCommon args
= {
1953 .listen_uri
= "defer",
1954 .start_hook
= test_migrate_multifd_tls_x509_start_allow_anon_client
,
1955 .finish_hook
= test_migrate_tls_x509_finish
,
1957 test_precopy_common(&args
);
1960 static void test_multifd_tcp_tls_x509_reject_anon_client(void)
1962 MigrateCommon args
= {
1964 .hide_stderr
= true,
1966 .listen_uri
= "defer",
1967 .start_hook
= test_migrate_multifd_tls_x509_start_reject_anon_client
,
1968 .finish_hook
= test_migrate_tls_x509_finish
,
1969 .result
= MIG_TEST_FAIL
,
1971 test_precopy_common(&args
);
1973 #endif /* CONFIG_TASN1 */
1974 #endif /* CONFIG_GNUTLS */
1982 * launch another target
1985 * And see that it works
1987 static void test_multifd_tcp_cancel(void)
1989 MigrateStart args
= {
1990 .hide_stderr
= true,
1992 QTestState
*from
, *to
, *to2
;
1994 g_autofree
char *uri
= NULL
;
1996 if (test_migrate_start(&from
, &to
, "defer", &args
)) {
2001 * We want to pick a speed slow enough that the test completes
2002 * quickly, but that it doesn't complete precopy even on a slow
2003 * machine, so also set the downtime.
2005 /* 1 ms should make it not converge*/
2006 migrate_set_parameter_int(from
, "downtime-limit", 1);
2008 migrate_set_parameter_int(from
, "max-bandwidth", 30000000);
2010 migrate_set_parameter_int(from
, "multifd-channels", 16);
2011 migrate_set_parameter_int(to
, "multifd-channels", 16);
2013 migrate_set_capability(from
, "multifd", true);
2014 migrate_set_capability(to
, "multifd", true);
2016 /* Start incoming migration from the 1st socket */
2017 rsp
= wait_command(to
, "{ 'execute': 'migrate-incoming',"
2018 " 'arguments': { 'uri': 'tcp:127.0.0.1:0' }}");
2021 /* Wait for the first serial output from the source */
2022 wait_for_serial("src_serial");
2024 uri
= migrate_get_socket_address(to
, "socket-address");
2026 migrate_qmp(from
, uri
, "{}");
2028 wait_for_migration_pass(from
);
2030 migrate_cancel(from
);
2032 args
= (MigrateStart
){
2033 .only_target
= true,
2036 if (test_migrate_start(&from
, &to2
, "defer", &args
)) {
2040 migrate_set_parameter_int(to2
, "multifd-channels", 16);
2042 migrate_set_capability(to2
, "multifd", true);
2044 /* Start incoming migration from the 1st socket */
2045 rsp
= wait_command(to2
, "{ 'execute': 'migrate-incoming',"
2046 " 'arguments': { 'uri': 'tcp:127.0.0.1:0' }}");
2050 uri
= migrate_get_socket_address(to2
, "socket-address");
2052 wait_for_migration_status(from
, "cancelled", NULL
);
2054 /* 300ms it should converge */
2055 migrate_set_parameter_int(from
, "downtime-limit", 300);
2057 migrate_set_parameter_int(from
, "max-bandwidth", 1000000000);
2059 migrate_qmp(from
, uri
, "{}");
2061 wait_for_migration_pass(from
);
2064 qtest_qmp_eventwait(from
, "STOP");
2066 qtest_qmp_eventwait(to2
, "RESUME");
2068 wait_for_serial("dest_serial");
2069 wait_for_migration_complete(from
);
2070 test_migrate_end(from
, to2
, true);
2073 static bool kvm_dirty_ring_supported(void)
2075 #if defined(__linux__) && defined(HOST_X86_64)
2076 int ret
, kvm_fd
= open("/dev/kvm", O_RDONLY
);
2082 ret
= ioctl(kvm_fd
, KVM_CHECK_EXTENSION
, KVM_CAP_DIRTY_LOG_RING
);
2085 /* We test with 4096 slots */
2096 int main(int argc
, char **argv
)
2098 char template[] = "/tmp/migration-test-XXXXXX";
2099 const bool has_kvm
= qtest_has_accel("kvm");
2102 g_test_init(&argc
, &argv
, NULL
);
2104 if (!ufd_version_check()) {
2105 return g_test_run();
2109 * On ppc64, the test only works with kvm-hv, but not with kvm-pr and TCG
2110 * is touchy due to race conditions on dirty bits (especially on PPC for
2113 if (g_str_equal(qtest_get_arch(), "ppc64") &&
2114 (!has_kvm
|| access("/sys/module/kvm_hv", F_OK
))) {
2115 g_test_message("Skipping test: kvm_hv not available");
2116 return g_test_run();
2120 * Similar to ppc64, s390x seems to be touchy with TCG, so disable it
2121 * there until the problems are resolved
2123 if (g_str_equal(qtest_get_arch(), "s390x") && !has_kvm
) {
2124 g_test_message("Skipping test: s390x host with KVM is required");
2125 return g_test_run();
2128 tmpfs
= mkdtemp(template);
2130 g_test_message("mkdtemp on path (%s): %s", template, strerror(errno
));
2134 module_call_init(MODULE_INIT_QOM
);
2136 qtest_add_func("/migration/postcopy/unix", test_postcopy
);
2137 qtest_add_func("/migration/postcopy/recovery", test_postcopy_recovery
);
2138 qtest_add_func("/migration/bad_dest", test_baddest
);
2139 qtest_add_func("/migration/precopy/unix/plain", test_precopy_unix_plain
);
2140 qtest_add_func("/migration/precopy/unix/xbzrle", test_precopy_unix_xbzrle
);
2141 #ifdef CONFIG_GNUTLS
2142 qtest_add_func("/migration/precopy/unix/tls/psk",
2143 test_precopy_unix_tls_psk
);
2145 qtest_add_func("/migration/precopy/unix/tls/x509/default-host",
2146 test_precopy_unix_tls_x509_default_host
);
2147 qtest_add_func("/migration/precopy/unix/tls/x509/override-host",
2148 test_precopy_unix_tls_x509_override_host
);
2149 #endif /* CONFIG_TASN1 */
2150 #endif /* CONFIG_GNUTLS */
2152 qtest_add_func("/migration/precopy/tcp/plain", test_precopy_tcp_plain
);
2153 #ifdef CONFIG_GNUTLS
2154 qtest_add_func("/migration/precopy/tcp/tls/psk/match",
2155 test_precopy_tcp_tls_psk_match
);
2156 qtest_add_func("/migration/precopy/tcp/tls/psk/mismatch",
2157 test_precopy_tcp_tls_psk_mismatch
);
2159 qtest_add_func("/migration/precopy/tcp/tls/x509/default-host",
2160 test_precopy_tcp_tls_x509_default_host
);
2161 qtest_add_func("/migration/precopy/tcp/tls/x509/override-host",
2162 test_precopy_tcp_tls_x509_override_host
);
2163 qtest_add_func("/migration/precopy/tcp/tls/x509/mismatch-host",
2164 test_precopy_tcp_tls_x509_mismatch_host
);
2165 qtest_add_func("/migration/precopy/tcp/tls/x509/friendly-client",
2166 test_precopy_tcp_tls_x509_friendly_client
);
2167 qtest_add_func("/migration/precopy/tcp/tls/x509/hostile-client",
2168 test_precopy_tcp_tls_x509_hostile_client
);
2169 qtest_add_func("/migration/precopy/tcp/tls/x509/allow-anon-client",
2170 test_precopy_tcp_tls_x509_allow_anon_client
);
2171 qtest_add_func("/migration/precopy/tcp/tls/x509/reject-anon-client",
2172 test_precopy_tcp_tls_x509_reject_anon_client
);
2173 #endif /* CONFIG_TASN1 */
2174 #endif /* CONFIG_GNUTLS */
2176 /* qtest_add_func("/migration/ignore_shared", test_ignore_shared); */
2177 qtest_add_func("/migration/fd_proto", test_migrate_fd_proto
);
2178 qtest_add_func("/migration/validate_uuid", test_validate_uuid
);
2179 qtest_add_func("/migration/validate_uuid_error", test_validate_uuid_error
);
2180 qtest_add_func("/migration/validate_uuid_src_not_set",
2181 test_validate_uuid_src_not_set
);
2182 qtest_add_func("/migration/validate_uuid_dst_not_set",
2183 test_validate_uuid_dst_not_set
);
2185 qtest_add_func("/migration/auto_converge", test_migrate_auto_converge
);
2186 qtest_add_func("/migration/multifd/tcp/plain/none",
2187 test_multifd_tcp_none
);
2188 qtest_add_func("/migration/multifd/tcp/plain/cancel",
2189 test_multifd_tcp_cancel
);
2190 qtest_add_func("/migration/multifd/tcp/plain/zlib",
2191 test_multifd_tcp_zlib
);
2193 qtest_add_func("/migration/multifd/tcp/plain/zstd",
2194 test_multifd_tcp_zstd
);
2196 #ifdef CONFIG_GNUTLS
2197 qtest_add_func("/migration/multifd/tcp/tls/psk/match",
2198 test_multifd_tcp_tls_psk_match
);
2199 qtest_add_func("/migration/multifd/tcp/tls/psk/mismatch",
2200 test_multifd_tcp_tls_psk_mismatch
);
2202 qtest_add_func("/migration/multifd/tcp/tls/x509/default-host",
2203 test_multifd_tcp_tls_x509_default_host
);
2204 qtest_add_func("/migration/multifd/tcp/tls/x509/override-host",
2205 test_multifd_tcp_tls_x509_override_host
);
2206 qtest_add_func("/migration/multifd/tcp/tls/x509/mismatch-host",
2207 test_multifd_tcp_tls_x509_mismatch_host
);
2208 qtest_add_func("/migration/multifd/tcp/tls/x509/allow-anon-client",
2209 test_multifd_tcp_tls_x509_allow_anon_client
);
2210 qtest_add_func("/migration/multifd/tcp/tls/x509/reject-anon-client",
2211 test_multifd_tcp_tls_x509_reject_anon_client
);
2212 #endif /* CONFIG_TASN1 */
2213 #endif /* CONFIG_GNUTLS */
2215 if (kvm_dirty_ring_supported()) {
2216 qtest_add_func("/migration/dirty_ring",
2217 test_precopy_unix_dirty_ring
);
2222 g_assert_cmpint(ret
, ==, 0);
2226 g_test_message("unable to rmdir: path (%s): %s",
2227 tmpfs
, strerror(errno
));