hw/sd/ssi-sd.c

   1 /*
   2  * SSI to SD card adapter.
   3  *
   4  * Copyright (c) 2007-2009 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * Copyright (c) 2021 Wind River Systems, Inc.
   8  * Improved by Bin Meng <bin.meng@windriver.com>
   9  *
  10  * Validated with U-Boot v2021.01 and Linux v5.10 mmc_spi driver
  11  *
  12  * This code is licensed under the GNU GPL v2.
  13  *
  14  * Contributions after 2012-01-13 are licensed under the terms of the
  15  * GNU GPL, version 2 or (at your option) any later version.
  16  */
  17
  18 #include "qemu/osdep.h"
  19 #include "sysemu/blockdev.h"
  20 #include "hw/ssi/ssi.h"
  21 #include "migration/vmstate.h"
  22 #include "hw/qdev-properties.h"
  23 #include "hw/sd/sd.h"
  24 #include "qapi/error.h"
  25 #include "qemu/crc-ccitt.h"
  26 #include "qemu/module.h"
  27 #include "qom/object.h"
  28
  29 //#define DEBUG_SSI_SD 1
  30
  31 #ifdef DEBUG_SSI_SD
  32 #define DPRINTF(fmt, ...) \
  33 do { printf("ssi_sd: " fmt , ## __VA_ARGS__); } while (0)
  34 #define BADF(fmt, ...) \
  35 do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__); exit(1);} while (0)
  36 #else
  37 #define DPRINTF(fmt, ...) do {} while(0)
  38 #define BADF(fmt, ...) \
  39 do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__);} while (0)
  40 #endif
  41
  42 typedef enum {
  43     SSI_SD_CMD = 0,
  44     SSI_SD_CMDARG,
  45     SSI_SD_PREP_RESP,
  46     SSI_SD_RESPONSE,
  47     SSI_SD_PREP_DATA,
  48     SSI_SD_DATA_START,
  49     SSI_SD_DATA_READ,
  50     SSI_SD_DATA_CRC16,
  51     SSI_SD_DATA_WRITE,
  52     SSI_SD_SKIP_CRC16,
  53 } ssi_sd_mode;
  54
  55 struct ssi_sd_state {
  56     SSIPeripheral ssidev;
  57     uint32_t mode;
  58     int cmd;
  59     uint8_t cmdarg[4];
  60     uint8_t response[5];
  61     uint16_t crc16;
  62     int32_t read_bytes;
  63     int32_t write_bytes;
  64     int32_t arglen;
  65     int32_t response_pos;
  66     int32_t stopping;
  67     SDBus sdbus;
  68 };
  69
  70 #define TYPE_SSI_SD "ssi-sd"
  71 OBJECT_DECLARE_SIMPLE_TYPE(ssi_sd_state, SSI_SD)
  72
  73 /* State word bits.  */
  74 #define SSI_SDR_LOCKED          0x0001
  75 #define SSI_SDR_WP_ERASE        0x0002
  76 #define SSI_SDR_ERROR           0x0004
  77 #define SSI_SDR_CC_ERROR        0x0008
  78 #define SSI_SDR_ECC_FAILED      0x0010
  79 #define SSI_SDR_WP_VIOLATION    0x0020
  80 #define SSI_SDR_ERASE_PARAM     0x0040
  81 #define SSI_SDR_OUT_OF_RANGE    0x0080
  82 #define SSI_SDR_IDLE            0x0100
  83 #define SSI_SDR_ERASE_RESET     0x0200
  84 #define SSI_SDR_ILLEGAL_COMMAND 0x0400
  85 #define SSI_SDR_COM_CRC_ERROR   0x0800
  86 #define SSI_SDR_ERASE_SEQ_ERROR 0x1000
  87 #define SSI_SDR_ADDRESS_ERROR   0x2000
  88 #define SSI_SDR_PARAMETER_ERROR 0x4000
  89
  90 /* multiple block write */
  91 #define SSI_TOKEN_MULTI_WRITE   0xfc
  92 /* terminate multiple block write */
  93 #define SSI_TOKEN_STOP_TRAN     0xfd
  94 /* single block read/write, multiple block read */
  95 #define SSI_TOKEN_SINGLE        0xfe
  96
  97 /* dummy value - don't care */
  98 #define SSI_DUMMY               0xff
  99
 100 /* data accepted */
 101 #define DATA_RESPONSE_ACCEPTED  0x05
 102
 103 static uint32_t ssi_sd_transfer(SSIPeripheral *dev, uint32_t val)
 104 {
 105     ssi_sd_state *s = SSI_SD(dev);
 106     SDRequest request;
 107     uint8_t longresp[16];
 108
 109     /*
 110      * Special case: allow CMD12 (STOP TRANSMISSION) while reading data.
 111      *
 112      * See "Physical Layer Specification Version 8.00" chapter 7.5.2.2,
 113      * to avoid conflict between CMD12 response and next data block,
 114      * timing of CMD12 should be controlled as follows:
 115      *
 116      * - CMD12 issued at the timing that end bit of CMD12 and end bit of
 117      *   data block is overlapped
 118      * - CMD12 issued after one clock cycle after host receives a token
 119      *   (either Start Block token or Data Error token)
 120      *
 121      * We need to catch CMD12 in all of the data read states.
 122      */
 123     if (s->mode >= SSI_SD_PREP_DATA && s->mode <= SSI_SD_DATA_CRC16) {
 124         if (val == 0x4c) {
 125             s->mode = SSI_SD_CMD;
 126             /* There must be at least one byte delay before the card responds */
 127             s->stopping = 1;
 128         }
 129     }
 130
 131     switch (s->mode) {
 132     case SSI_SD_CMD:
 133         switch (val) {
 134         case SSI_DUMMY:
 135             DPRINTF("NULL command\n");
 136             return SSI_DUMMY;
 137             break;
 138         case SSI_TOKEN_SINGLE:
 139         case SSI_TOKEN_MULTI_WRITE:
 140             DPRINTF("Start write block\n");
 141             s->mode = SSI_SD_DATA_WRITE;
 142             return SSI_DUMMY;
 143         case SSI_TOKEN_STOP_TRAN:
 144             DPRINTF("Stop multiple write\n");
 145
 146             /* manually issue cmd12 to stop the transfer */
 147             request.cmd = 12;
 148             request.arg = 0;
 149             s->arglen = sdbus_do_command(&s->sdbus, &request, longresp);
 150             if (s->arglen <= 0) {
 151                 s->arglen = 1;
 152                 /* a zero value indicates the card is busy */
 153                 s->response[0] = 0;
 154                 DPRINTF("SD card busy\n");
 155             } else {
 156                 s->arglen = 1;
 157                 /* a non-zero value indicates the card is ready */
 158                 s->response[0] = SSI_DUMMY;
 159             }
 160
 161             return SSI_DUMMY;
 162         }
 163
 164         s->cmd = val & 0x3f;
 165         s->mode = SSI_SD_CMDARG;
 166         s->arglen = 0;
 167         return SSI_DUMMY;
 168     case SSI_SD_CMDARG:
 169         if (s->arglen == 4) {
 170             /* FIXME: Check CRC.  */
 171             request.cmd = s->cmd;
 172             request.arg = ldl_be_p(s->cmdarg);
 173             DPRINTF("CMD%d arg 0x%08x\n", s->cmd, request.arg);
 174             s->arglen = sdbus_do_command(&s->sdbus, &request, longresp);
 175             if (s->arglen <= 0) {
 176                 s->arglen = 1;
 177                 s->response[0] = 4;
 178                 DPRINTF("SD command failed\n");
 179             } else if (s->cmd == 8 || s->cmd == 58) {
 180                 /* CMD8/CMD58 returns R3/R7 response */
 181                 DPRINTF("Returned R3/R7\n");
 182                 s->arglen = 5;
 183                 s->response[0] = 1;
 184                 memcpy(&s->response[1], longresp, 4);
 185             } else if (s->arglen != 4) {
 186                 BADF("Unexpected response to cmd %d\n", s->cmd);
 187                 /* Illegal command is about as near as we can get.  */
 188                 s->arglen = 1;
 189                 s->response[0] = 4;
 190             } else {
 191                 /* All other commands return status.  */
 192                 uint32_t cardstatus;
 193                 uint16_t status;
 194                 /* CMD13 returns a 2-byte statuse work. Other commands
 195                    only return the first byte.  */
 196                 s->arglen = (s->cmd == 13) ? 2 : 1;
 197
 198                 /* handle R1b */
 199                 if (s->cmd == 28 || s->cmd == 29 || s->cmd == 38) {
 200                     s->stopping = 1;
 201                 }
 202
 203                 cardstatus = ldl_be_p(longresp);
 204                 status = 0;
 205                 if (((cardstatus >> 9) & 0xf) < 4)
 206                     status |= SSI_SDR_IDLE;
 207                 if (cardstatus & ERASE_RESET)
 208                     status |= SSI_SDR_ERASE_RESET;
 209                 if (cardstatus & ILLEGAL_COMMAND)
 210                     status |= SSI_SDR_ILLEGAL_COMMAND;
 211                 if (cardstatus & COM_CRC_ERROR)
 212                     status |= SSI_SDR_COM_CRC_ERROR;
 213                 if (cardstatus & ERASE_SEQ_ERROR)
 214                     status |= SSI_SDR_ERASE_SEQ_ERROR;
 215                 if (cardstatus & ADDRESS_ERROR)
 216                     status |= SSI_SDR_ADDRESS_ERROR;
 217                 if (cardstatus & CARD_IS_LOCKED)
 218                     status |= SSI_SDR_LOCKED;
 219                 if (cardstatus & (LOCK_UNLOCK_FAILED | WP_ERASE_SKIP))
 220                     status |= SSI_SDR_WP_ERASE;
 221                 if (cardstatus & SD_ERROR)
 222                     status |= SSI_SDR_ERROR;
 223                 if (cardstatus & CC_ERROR)
 224                     status |= SSI_SDR_CC_ERROR;
 225                 if (cardstatus & CARD_ECC_FAILED)
 226                     status |= SSI_SDR_ECC_FAILED;
 227                 if (cardstatus & WP_VIOLATION)
 228                     status |= SSI_SDR_WP_VIOLATION;
 229                 if (cardstatus & ERASE_PARAM)
 230                     status |= SSI_SDR_ERASE_PARAM;
 231                 if (cardstatus & (OUT_OF_RANGE | CID_CSD_OVERWRITE))
 232                     status |= SSI_SDR_OUT_OF_RANGE;
 233                 /* ??? Don't know what Parameter Error really means, so
 234                    assume it's set if the second byte is nonzero.  */
 235                 if (status & 0xff)
 236                     status |= SSI_SDR_PARAMETER_ERROR;
 237                 s->response[0] = status >> 8;
 238                 s->response[1] = status;
 239                 DPRINTF("Card status 0x%02x\n", status);
 240             }
 241             s->mode = SSI_SD_PREP_RESP;
 242             s->response_pos = 0;
 243         } else {
 244             s->cmdarg[s->arglen++] = val;
 245         }
 246         return SSI_DUMMY;
 247     case SSI_SD_PREP_RESP:
 248         DPRINTF("Prepare card response (Ncr)\n");
 249         s->mode = SSI_SD_RESPONSE;
 250         return SSI_DUMMY;
 251     case SSI_SD_RESPONSE:
 252         if (s->response_pos < s->arglen) {
 253             DPRINTF("Response 0x%02x\n", s->response[s->response_pos]);
 254             return s->response[s->response_pos++];
 255         }
 256         if (s->stopping) {
 257             s->stopping = 0;
 258             s->mode = SSI_SD_CMD;
 259             return SSI_DUMMY;
 260         }
 261         if (sdbus_data_ready(&s->sdbus)) {
 262             DPRINTF("Data read\n");
 263             s->mode = SSI_SD_DATA_START;
 264         } else {
 265             DPRINTF("End of command\n");
 266             s->mode = SSI_SD_CMD;
 267         }
 268         return SSI_DUMMY;
 269     case SSI_SD_PREP_DATA:
 270         DPRINTF("Prepare data block (Nac)\n");
 271         s->mode = SSI_SD_DATA_START;
 272         return SSI_DUMMY;
 273     case SSI_SD_DATA_START:
 274         DPRINTF("Start read block\n");
 275         s->mode = SSI_SD_DATA_READ;
 276         s->response_pos = 0;
 277         return SSI_TOKEN_SINGLE;
 278     case SSI_SD_DATA_READ:
 279         val = sdbus_read_byte(&s->sdbus);
 280         s->read_bytes++;
 281         s->crc16 = crc_ccitt_false(s->crc16, (uint8_t *)&val, 1);
 282         if (!sdbus_data_ready(&s->sdbus) || s->read_bytes == 512) {
 283             DPRINTF("Data read end\n");
 284             s->mode = SSI_SD_DATA_CRC16;
 285         }
 286         return val;
 287     case SSI_SD_DATA_CRC16:
 288         val = (s->crc16 & 0xff00) >> 8;
 289         s->crc16 <<= 8;
 290         s->response_pos++;
 291         if (s->response_pos == 2) {
 292             DPRINTF("CRC16 read end\n");
 293             if (s->read_bytes == 512 && s->cmd != 17) {
 294                 s->mode = SSI_SD_PREP_DATA;
 295             } else {
 296                 s->mode = SSI_SD_CMD;
 297             }
 298             s->read_bytes = 0;
 299             s->response_pos = 0;
 300         }
 301         return val;
 302     case SSI_SD_DATA_WRITE:
 303         sdbus_write_byte(&s->sdbus, val);
 304         s->write_bytes++;
 305         if (!sdbus_receive_ready(&s->sdbus) || s->write_bytes == 512) {
 306             DPRINTF("Data write end\n");
 307             s->mode = SSI_SD_SKIP_CRC16;
 308             s->response_pos = 0;
 309         }
 310         return val;
 311     case SSI_SD_SKIP_CRC16:
 312         /* we don't verify the crc16 */
 313         s->response_pos++;
 314         if (s->response_pos == 2) {
 315             DPRINTF("CRC16 receive end\n");
 316             s->mode = SSI_SD_RESPONSE;
 317             s->write_bytes = 0;
 318             s->arglen = 1;
 319             s->response[0] = DATA_RESPONSE_ACCEPTED;
 320             s->response_pos = 0;
 321         }
 322         return SSI_DUMMY;
 323     }
 324     /* Should never happen.  */
 325     return SSI_DUMMY;
 326 }
 327
 328 static int ssi_sd_post_load(void *opaque, int version_id)
 329 {
 330     ssi_sd_state *s = (ssi_sd_state *)opaque;
 331
 332     if (s->mode > SSI_SD_SKIP_CRC16) {
 333         return -EINVAL;
 334     }
 335     if (s->mode == SSI_SD_CMDARG &&
 336         (s->arglen < 0 || s->arglen >= ARRAY_SIZE(s->cmdarg))) {
 337         return -EINVAL;
 338     }
 339     if (s->mode == SSI_SD_RESPONSE &&
 340         (s->response_pos < 0 || s->response_pos >= ARRAY_SIZE(s->response) ||
 341         (!s->stopping && s->arglen > ARRAY_SIZE(s->response)))) {
 342         return -EINVAL;
 343     }
 344
 345     return 0;
 346 }
 347
 348 static const VMStateDescription vmstate_ssi_sd = {
 349     .name = "ssi_sd",
 350     .version_id = 7,
 351     .minimum_version_id = 7,
 352     .post_load = ssi_sd_post_load,
 353     .fields = (const VMStateField []) {
 354         VMSTATE_UINT32(mode, ssi_sd_state),
 355         VMSTATE_INT32(cmd, ssi_sd_state),
 356         VMSTATE_UINT8_ARRAY(cmdarg, ssi_sd_state, 4),
 357         VMSTATE_UINT8_ARRAY(response, ssi_sd_state, 5),
 358         VMSTATE_UINT16(crc16, ssi_sd_state),
 359         VMSTATE_INT32(read_bytes, ssi_sd_state),
 360         VMSTATE_INT32(write_bytes, ssi_sd_state),
 361         VMSTATE_INT32(arglen, ssi_sd_state),
 362         VMSTATE_INT32(response_pos, ssi_sd_state),
 363         VMSTATE_INT32(stopping, ssi_sd_state),
 364         VMSTATE_SSI_PERIPHERAL(ssidev, ssi_sd_state),
 365         VMSTATE_END_OF_LIST()
 366     }
 367 };
 368
 369 static void ssi_sd_realize(SSIPeripheral *d, Error **errp)
 370 {
 371     ssi_sd_state *s = SSI_SD(d);
 372
 373     qbus_init(&s->sdbus, sizeof(s->sdbus), TYPE_SD_BUS, DEVICE(d), "sd-bus");
 374 }
 375
 376 static void ssi_sd_reset(DeviceState *dev)
 377 {
 378     ssi_sd_state *s = SSI_SD(dev);
 379
 380     s->mode = SSI_SD_CMD;
 381     s->cmd = 0;
 382     memset(s->cmdarg, 0, sizeof(s->cmdarg));
 383     memset(s->response, 0, sizeof(s->response));
 384     s->crc16 = 0;
 385     s->read_bytes = 0;
 386     s->write_bytes = 0;
 387     s->arglen = 0;
 388     s->response_pos = 0;
 389     s->stopping = 0;
 390 }
 391
 392 static void ssi_sd_class_init(ObjectClass *klass, void *data)
 393 {
 394     DeviceClass *dc = DEVICE_CLASS(klass);
 395     SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);
 396
 397     k->realize = ssi_sd_realize;
 398     k->transfer = ssi_sd_transfer;
 399     k->cs_polarity = SSI_CS_LOW;
 400     dc->vmsd = &vmstate_ssi_sd;
 401     dc->reset = ssi_sd_reset;
 402     /* Reason: GPIO chip-select line should be wired up */
 403     dc->user_creatable = false;
 404 }
 405
 406 static const TypeInfo ssi_sd_types[] = {
 407     {
 408         .name           = TYPE_SSI_SD,
 409         .parent         = TYPE_SSI_PERIPHERAL,
 410         .instance_size  = sizeof(ssi_sd_state),
 411         .class_init     = ssi_sd_class_init,
 412     },
 413 };
 414
 415 DEFINE_TYPES(ssi_sd_types)