Fix nocow typos in manpage
[qemu/ar7.git] / block.c
blobf80e2b2b58bbcec7207c47f794883f568d8b975b
1 /*
2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "block/block_int.h"
28 #include "block/blockjob.h"
29 #include "qemu/module.h"
30 #include "qapi/qmp/qjson.h"
31 #include "sysemu/sysemu.h"
32 #include "qemu/notify.h"
33 #include "block/coroutine.h"
34 #include "block/qapi.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
37 #include "qapi-event.h"
39 #ifdef CONFIG_BSD
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
44 #ifndef __DragonFly__
45 #include <sys/disk.h>
46 #endif
47 #endif
49 #ifdef _WIN32
50 #include <windows.h>
51 #endif
53 struct BdrvDirtyBitmap {
54 HBitmap *bitmap;
55 QLIST_ENTRY(BdrvDirtyBitmap) list;
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63 BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66 BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68 int64_t sector_num, int nb_sectors,
69 QEMUIOVector *iov);
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71 int64_t sector_num, int nb_sectors,
72 QEMUIOVector *iov);
73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
74 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
75 BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
77 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
78 BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
80 int64_t sector_num,
81 QEMUIOVector *qiov,
82 int nb_sectors,
83 BdrvRequestFlags flags,
84 BlockDriverCompletionFunc *cb,
85 void *opaque,
86 bool is_write);
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92 QTAILQ_HEAD_INITIALIZER(bdrv_states);
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98 QLIST_HEAD_INITIALIZER(bdrv_drivers);
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
103 #ifdef _WIN32
104 static int is_windows_drive_prefix(const char *filename)
106 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
108 filename[1] == ':');
111 int is_windows_drive(const char *filename)
113 if (is_windows_drive_prefix(filename) &&
114 filename[2] == '\0')
115 return 1;
116 if (strstart(filename, "\\\\.\\", NULL) ||
117 strstart(filename, "//./", NULL))
118 return 1;
119 return 0;
121 #endif
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
125 ThrottleConfig *cfg)
127 int i;
129 throttle_config(&bs->throttle_state, cfg);
131 for (i = 0; i < 2; i++) {
132 qemu_co_enter_next(&bs->throttled_reqs[i]);
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
139 bool drained = false;
140 bool enabled = bs->io_limits_enabled;
141 int i;
143 bs->io_limits_enabled = false;
145 for (i = 0; i < 2; i++) {
146 while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
147 drained = true;
151 bs->io_limits_enabled = enabled;
153 return drained;
156 void bdrv_io_limits_disable(BlockDriverState *bs)
158 bs->io_limits_enabled = false;
160 bdrv_start_throttled_reqs(bs);
162 throttle_destroy(&bs->throttle_state);
165 static void bdrv_throttle_read_timer_cb(void *opaque)
167 BlockDriverState *bs = opaque;
168 qemu_co_enter_next(&bs->throttled_reqs[0]);
171 static void bdrv_throttle_write_timer_cb(void *opaque)
173 BlockDriverState *bs = opaque;
174 qemu_co_enter_next(&bs->throttled_reqs[1]);
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
180 assert(!bs->io_limits_enabled);
181 throttle_init(&bs->throttle_state,
182 bdrv_get_aio_context(bs),
183 QEMU_CLOCK_VIRTUAL,
184 bdrv_throttle_read_timer_cb,
185 bdrv_throttle_write_timer_cb,
186 bs);
187 bs->io_limits_enabled = true;
190 /* This function makes an IO wait if needed
192 * @nb_sectors: the number of sectors of the IO
193 * @is_write: is the IO a write
195 static void bdrv_io_limits_intercept(BlockDriverState *bs,
196 unsigned int bytes,
197 bool is_write)
199 /* does this io must wait */
200 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
202 /* if must wait or any request of this type throttled queue the IO */
203 if (must_wait ||
204 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
205 qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
208 /* the IO will be executed, do the accounting */
209 throttle_account(&bs->throttle_state, is_write, bytes);
212 /* if the next request must wait -> do nothing */
213 if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
214 return;
217 /* else queue next request for execution */
218 qemu_co_queue_next(&bs->throttled_reqs[is_write]);
221 size_t bdrv_opt_mem_align(BlockDriverState *bs)
223 if (!bs || !bs->drv) {
224 /* 4k should be on the safe side */
225 return 4096;
228 return bs->bl.opt_mem_alignment;
231 /* check if the path starts with "<protocol>:" */
232 static int path_has_protocol(const char *path)
234 const char *p;
236 #ifdef _WIN32
237 if (is_windows_drive(path) ||
238 is_windows_drive_prefix(path)) {
239 return 0;
241 p = path + strcspn(path, ":/\\");
242 #else
243 p = path + strcspn(path, ":/");
244 #endif
246 return *p == ':';
249 int path_is_absolute(const char *path)
251 #ifdef _WIN32
252 /* specific case for names like: "\\.\d:" */
253 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
254 return 1;
256 return (*path == '/' || *path == '\\');
257 #else
258 return (*path == '/');
259 #endif
262 /* if filename is absolute, just copy it to dest. Otherwise, build a
263 path to it by considering it is relative to base_path. URL are
264 supported. */
265 void path_combine(char *dest, int dest_size,
266 const char *base_path,
267 const char *filename)
269 const char *p, *p1;
270 int len;
272 if (dest_size <= 0)
273 return;
274 if (path_is_absolute(filename)) {
275 pstrcpy(dest, dest_size, filename);
276 } else {
277 p = strchr(base_path, ':');
278 if (p)
279 p++;
280 else
281 p = base_path;
282 p1 = strrchr(base_path, '/');
283 #ifdef _WIN32
285 const char *p2;
286 p2 = strrchr(base_path, '\\');
287 if (!p1 || p2 > p1)
288 p1 = p2;
290 #endif
291 if (p1)
292 p1++;
293 else
294 p1 = base_path;
295 if (p1 > p)
296 p = p1;
297 len = p - base_path;
298 if (len > dest_size - 1)
299 len = dest_size - 1;
300 memcpy(dest, base_path, len);
301 dest[len] = '\0';
302 pstrcat(dest, dest_size, filename);
306 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
308 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
309 pstrcpy(dest, sz, bs->backing_file);
310 } else {
311 path_combine(dest, sz, bs->filename, bs->backing_file);
315 void bdrv_register(BlockDriver *bdrv)
317 /* Block drivers without coroutine functions need emulation */
318 if (!bdrv->bdrv_co_readv) {
319 bdrv->bdrv_co_readv = bdrv_co_readv_em;
320 bdrv->bdrv_co_writev = bdrv_co_writev_em;
322 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
323 * the block driver lacks aio we need to emulate that too.
325 if (!bdrv->bdrv_aio_readv) {
326 /* add AIO emulation layer */
327 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
328 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
332 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
335 /* create a new block device (by default it is empty) */
336 BlockDriverState *bdrv_new(const char *device_name, Error **errp)
338 BlockDriverState *bs;
339 int i;
341 if (bdrv_find(device_name)) {
342 error_setg(errp, "Device with id '%s' already exists",
343 device_name);
344 return NULL;
346 if (bdrv_find_node(device_name)) {
347 error_setg(errp, "Device with node-name '%s' already exists",
348 device_name);
349 return NULL;
352 bs = g_malloc0(sizeof(BlockDriverState));
353 QLIST_INIT(&bs->dirty_bitmaps);
354 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
355 if (device_name[0] != '\0') {
356 QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
358 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
359 QLIST_INIT(&bs->op_blockers[i]);
361 bdrv_iostatus_disable(bs);
362 notifier_list_init(&bs->close_notifiers);
363 notifier_with_return_list_init(&bs->before_write_notifiers);
364 qemu_co_queue_init(&bs->throttled_reqs[0]);
365 qemu_co_queue_init(&bs->throttled_reqs[1]);
366 bs->refcnt = 1;
367 bs->aio_context = qemu_get_aio_context();
369 return bs;
372 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
374 notifier_list_add(&bs->close_notifiers, notify);
377 BlockDriver *bdrv_find_format(const char *format_name)
379 BlockDriver *drv1;
380 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
381 if (!strcmp(drv1->format_name, format_name)) {
382 return drv1;
385 return NULL;
388 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
390 static const char *whitelist_rw[] = {
391 CONFIG_BDRV_RW_WHITELIST
393 static const char *whitelist_ro[] = {
394 CONFIG_BDRV_RO_WHITELIST
396 const char **p;
398 if (!whitelist_rw[0] && !whitelist_ro[0]) {
399 return 1; /* no whitelist, anything goes */
402 for (p = whitelist_rw; *p; p++) {
403 if (!strcmp(drv->format_name, *p)) {
404 return 1;
407 if (read_only) {
408 for (p = whitelist_ro; *p; p++) {
409 if (!strcmp(drv->format_name, *p)) {
410 return 1;
414 return 0;
417 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
418 bool read_only)
420 BlockDriver *drv = bdrv_find_format(format_name);
421 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
424 typedef struct CreateCo {
425 BlockDriver *drv;
426 char *filename;
427 QemuOpts *opts;
428 int ret;
429 Error *err;
430 } CreateCo;
432 static void coroutine_fn bdrv_create_co_entry(void *opaque)
434 Error *local_err = NULL;
435 int ret;
437 CreateCo *cco = opaque;
438 assert(cco->drv);
440 ret = cco->drv->bdrv_create(cco->filename, cco->opts, &local_err);
441 if (local_err) {
442 error_propagate(&cco->err, local_err);
444 cco->ret = ret;
447 int bdrv_create(BlockDriver *drv, const char* filename,
448 QemuOpts *opts, Error **errp)
450 int ret;
452 Coroutine *co;
453 CreateCo cco = {
454 .drv = drv,
455 .filename = g_strdup(filename),
456 .opts = opts,
457 .ret = NOT_DONE,
458 .err = NULL,
461 if (!drv->bdrv_create) {
462 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
463 ret = -ENOTSUP;
464 goto out;
467 if (qemu_in_coroutine()) {
468 /* Fast-path if already in coroutine context */
469 bdrv_create_co_entry(&cco);
470 } else {
471 co = qemu_coroutine_create(bdrv_create_co_entry);
472 qemu_coroutine_enter(co, &cco);
473 while (cco.ret == NOT_DONE) {
474 qemu_aio_wait();
478 ret = cco.ret;
479 if (ret < 0) {
480 if (cco.err) {
481 error_propagate(errp, cco.err);
482 } else {
483 error_setg_errno(errp, -ret, "Could not create image");
487 out:
488 g_free(cco.filename);
489 return ret;
492 int bdrv_create_file(const char *filename, QemuOpts *opts, Error **errp)
494 BlockDriver *drv;
495 Error *local_err = NULL;
496 int ret;
498 drv = bdrv_find_protocol(filename, true);
499 if (drv == NULL) {
500 error_setg(errp, "Could not find protocol for file '%s'", filename);
501 return -ENOENT;
504 ret = bdrv_create(drv, filename, opts, &local_err);
505 if (local_err) {
506 error_propagate(errp, local_err);
508 return ret;
511 int bdrv_refresh_limits(BlockDriverState *bs)
513 BlockDriver *drv = bs->drv;
515 memset(&bs->bl, 0, sizeof(bs->bl));
517 if (!drv) {
518 return 0;
521 /* Take some limits from the children as a default */
522 if (bs->file) {
523 bdrv_refresh_limits(bs->file);
524 bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
525 bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
526 } else {
527 bs->bl.opt_mem_alignment = 512;
530 if (bs->backing_hd) {
531 bdrv_refresh_limits(bs->backing_hd);
532 bs->bl.opt_transfer_length =
533 MAX(bs->bl.opt_transfer_length,
534 bs->backing_hd->bl.opt_transfer_length);
535 bs->bl.opt_mem_alignment =
536 MAX(bs->bl.opt_mem_alignment,
537 bs->backing_hd->bl.opt_mem_alignment);
540 /* Then let the driver override it */
541 if (drv->bdrv_refresh_limits) {
542 return drv->bdrv_refresh_limits(bs);
545 return 0;
549 * Create a uniquely-named empty temporary file.
550 * Return 0 upon success, otherwise a negative errno value.
552 int get_tmp_filename(char *filename, int size)
554 #ifdef _WIN32
555 char temp_dir[MAX_PATH];
556 /* GetTempFileName requires that its output buffer (4th param)
557 have length MAX_PATH or greater. */
558 assert(size >= MAX_PATH);
559 return (GetTempPath(MAX_PATH, temp_dir)
560 && GetTempFileName(temp_dir, "qem", 0, filename)
561 ? 0 : -GetLastError());
562 #else
563 int fd;
564 const char *tmpdir;
565 tmpdir = getenv("TMPDIR");
566 if (!tmpdir) {
567 tmpdir = "/var/tmp";
569 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
570 return -EOVERFLOW;
572 fd = mkstemp(filename);
573 if (fd < 0) {
574 return -errno;
576 if (close(fd) != 0) {
577 unlink(filename);
578 return -errno;
580 return 0;
581 #endif
585 * Detect host devices. By convention, /dev/cdrom[N] is always
586 * recognized as a host CDROM.
588 static BlockDriver *find_hdev_driver(const char *filename)
590 int score_max = 0, score;
591 BlockDriver *drv = NULL, *d;
593 QLIST_FOREACH(d, &bdrv_drivers, list) {
594 if (d->bdrv_probe_device) {
595 score = d->bdrv_probe_device(filename);
596 if (score > score_max) {
597 score_max = score;
598 drv = d;
603 return drv;
606 BlockDriver *bdrv_find_protocol(const char *filename,
607 bool allow_protocol_prefix)
609 BlockDriver *drv1;
610 char protocol[128];
611 int len;
612 const char *p;
614 /* TODO Drivers without bdrv_file_open must be specified explicitly */
617 * XXX(hch): we really should not let host device detection
618 * override an explicit protocol specification, but moving this
619 * later breaks access to device names with colons in them.
620 * Thanks to the brain-dead persistent naming schemes on udev-
621 * based Linux systems those actually are quite common.
623 drv1 = find_hdev_driver(filename);
624 if (drv1) {
625 return drv1;
628 if (!path_has_protocol(filename) || !allow_protocol_prefix) {
629 return bdrv_find_format("file");
632 p = strchr(filename, ':');
633 assert(p != NULL);
634 len = p - filename;
635 if (len > sizeof(protocol) - 1)
636 len = sizeof(protocol) - 1;
637 memcpy(protocol, filename, len);
638 protocol[len] = '\0';
639 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
640 if (drv1->protocol_name &&
641 !strcmp(drv1->protocol_name, protocol)) {
642 return drv1;
645 return NULL;
648 static int find_image_format(BlockDriverState *bs, const char *filename,
649 BlockDriver **pdrv, Error **errp)
651 int score, score_max;
652 BlockDriver *drv1, *drv;
653 uint8_t buf[2048];
654 int ret = 0;
656 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
657 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
658 drv = bdrv_find_format("raw");
659 if (!drv) {
660 error_setg(errp, "Could not find raw image format");
661 ret = -ENOENT;
663 *pdrv = drv;
664 return ret;
667 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
668 if (ret < 0) {
669 error_setg_errno(errp, -ret, "Could not read image for determining its "
670 "format");
671 *pdrv = NULL;
672 return ret;
675 score_max = 0;
676 drv = NULL;
677 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
678 if (drv1->bdrv_probe) {
679 score = drv1->bdrv_probe(buf, ret, filename);
680 if (score > score_max) {
681 score_max = score;
682 drv = drv1;
686 if (!drv) {
687 error_setg(errp, "Could not determine image format: No compatible "
688 "driver found");
689 ret = -ENOENT;
691 *pdrv = drv;
692 return ret;
696 * Set the current 'total_sectors' value
698 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
700 BlockDriver *drv = bs->drv;
702 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
703 if (bs->sg)
704 return 0;
706 /* query actual device if possible, otherwise just trust the hint */
707 if (drv->bdrv_getlength) {
708 int64_t length = drv->bdrv_getlength(bs);
709 if (length < 0) {
710 return length;
712 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
715 bs->total_sectors = hint;
716 return 0;
720 * Set open flags for a given discard mode
722 * Return 0 on success, -1 if the discard mode was invalid.
724 int bdrv_parse_discard_flags(const char *mode, int *flags)
726 *flags &= ~BDRV_O_UNMAP;
728 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
729 /* do nothing */
730 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
731 *flags |= BDRV_O_UNMAP;
732 } else {
733 return -1;
736 return 0;
740 * Set open flags for a given cache mode
742 * Return 0 on success, -1 if the cache mode was invalid.
744 int bdrv_parse_cache_flags(const char *mode, int *flags)
746 *flags &= ~BDRV_O_CACHE_MASK;
748 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
749 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
750 } else if (!strcmp(mode, "directsync")) {
751 *flags |= BDRV_O_NOCACHE;
752 } else if (!strcmp(mode, "writeback")) {
753 *flags |= BDRV_O_CACHE_WB;
754 } else if (!strcmp(mode, "unsafe")) {
755 *flags |= BDRV_O_CACHE_WB;
756 *flags |= BDRV_O_NO_FLUSH;
757 } else if (!strcmp(mode, "writethrough")) {
758 /* this is the default */
759 } else {
760 return -1;
763 return 0;
767 * The copy-on-read flag is actually a reference count so multiple users may
768 * use the feature without worrying about clobbering its previous state.
769 * Copy-on-read stays enabled until all users have called to disable it.
771 void bdrv_enable_copy_on_read(BlockDriverState *bs)
773 bs->copy_on_read++;
776 void bdrv_disable_copy_on_read(BlockDriverState *bs)
778 assert(bs->copy_on_read > 0);
779 bs->copy_on_read--;
783 * Returns the flags that a temporary snapshot should get, based on the
784 * originally requested flags (the originally requested image will have flags
785 * like a backing file)
787 static int bdrv_temp_snapshot_flags(int flags)
789 return (flags & ~BDRV_O_SNAPSHOT) | BDRV_O_TEMPORARY;
793 * Returns the flags that bs->file should get, based on the given flags for
794 * the parent BDS
796 static int bdrv_inherited_flags(int flags)
798 /* Enable protocol handling, disable format probing for bs->file */
799 flags |= BDRV_O_PROTOCOL;
801 /* Our block drivers take care to send flushes and respect unmap policy,
802 * so we can enable both unconditionally on lower layers. */
803 flags |= BDRV_O_CACHE_WB | BDRV_O_UNMAP;
805 /* Clear flags that only apply to the top layer */
806 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_COPY_ON_READ);
808 return flags;
812 * Returns the flags that bs->backing_hd should get, based on the given flags
813 * for the parent BDS
815 static int bdrv_backing_flags(int flags)
817 /* backing files always opened read-only */
818 flags &= ~(BDRV_O_RDWR | BDRV_O_COPY_ON_READ);
820 /* snapshot=on is handled on the top layer */
821 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_TEMPORARY);
823 return flags;
826 static int bdrv_open_flags(BlockDriverState *bs, int flags)
828 int open_flags = flags | BDRV_O_CACHE_WB;
831 * Clear flags that are internal to the block layer before opening the
832 * image.
834 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_PROTOCOL);
837 * Snapshots should be writable.
839 if (flags & BDRV_O_TEMPORARY) {
840 open_flags |= BDRV_O_RDWR;
843 return open_flags;
846 static void bdrv_assign_node_name(BlockDriverState *bs,
847 const char *node_name,
848 Error **errp)
850 if (!node_name) {
851 return;
854 /* empty string node name is invalid */
855 if (node_name[0] == '\0') {
856 error_setg(errp, "Empty node name");
857 return;
860 /* takes care of avoiding namespaces collisions */
861 if (bdrv_find(node_name)) {
862 error_setg(errp, "node-name=%s is conflicting with a device id",
863 node_name);
864 return;
867 /* takes care of avoiding duplicates node names */
868 if (bdrv_find_node(node_name)) {
869 error_setg(errp, "Duplicate node name");
870 return;
873 /* copy node name into the bs and insert it into the graph list */
874 pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
875 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
879 * Common part for opening disk images and files
881 * Removes all processed options from *options.
883 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
884 QDict *options, int flags, BlockDriver *drv, Error **errp)
886 int ret, open_flags;
887 const char *filename;
888 const char *node_name = NULL;
889 Error *local_err = NULL;
891 assert(drv != NULL);
892 assert(bs->file == NULL);
893 assert(options != NULL && bs->options != options);
895 if (file != NULL) {
896 filename = file->filename;
897 } else {
898 filename = qdict_get_try_str(options, "filename");
901 if (drv->bdrv_needs_filename && !filename) {
902 error_setg(errp, "The '%s' block driver requires a file name",
903 drv->format_name);
904 return -EINVAL;
907 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
909 node_name = qdict_get_try_str(options, "node-name");
910 bdrv_assign_node_name(bs, node_name, &local_err);
911 if (local_err) {
912 error_propagate(errp, local_err);
913 return -EINVAL;
915 qdict_del(options, "node-name");
917 /* bdrv_open() with directly using a protocol as drv. This layer is already
918 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
919 * and return immediately. */
920 if (file != NULL && drv->bdrv_file_open) {
921 bdrv_swap(file, bs);
922 return 0;
925 bs->open_flags = flags;
926 bs->guest_block_size = 512;
927 bs->request_alignment = 512;
928 bs->zero_beyond_eof = true;
929 open_flags = bdrv_open_flags(bs, flags);
930 bs->read_only = !(open_flags & BDRV_O_RDWR);
931 bs->growable = !!(flags & BDRV_O_PROTOCOL);
933 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
934 error_setg(errp,
935 !bs->read_only && bdrv_is_whitelisted(drv, true)
936 ? "Driver '%s' can only be used for read-only devices"
937 : "Driver '%s' is not whitelisted",
938 drv->format_name);
939 return -ENOTSUP;
942 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
943 if (flags & BDRV_O_COPY_ON_READ) {
944 if (!bs->read_only) {
945 bdrv_enable_copy_on_read(bs);
946 } else {
947 error_setg(errp, "Can't use copy-on-read on read-only device");
948 return -EINVAL;
952 if (filename != NULL) {
953 pstrcpy(bs->filename, sizeof(bs->filename), filename);
954 } else {
955 bs->filename[0] = '\0';
958 bs->drv = drv;
959 bs->opaque = g_malloc0(drv->instance_size);
961 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
963 /* Open the image, either directly or using a protocol */
964 if (drv->bdrv_file_open) {
965 assert(file == NULL);
966 assert(!drv->bdrv_needs_filename || filename != NULL);
967 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
968 } else {
969 if (file == NULL) {
970 error_setg(errp, "Can't use '%s' as a block driver for the "
971 "protocol level", drv->format_name);
972 ret = -EINVAL;
973 goto free_and_fail;
975 bs->file = file;
976 ret = drv->bdrv_open(bs, options, open_flags, &local_err);
979 if (ret < 0) {
980 if (local_err) {
981 error_propagate(errp, local_err);
982 } else if (bs->filename[0]) {
983 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
984 } else {
985 error_setg_errno(errp, -ret, "Could not open image");
987 goto free_and_fail;
990 ret = refresh_total_sectors(bs, bs->total_sectors);
991 if (ret < 0) {
992 error_setg_errno(errp, -ret, "Could not refresh total sector count");
993 goto free_and_fail;
996 bdrv_refresh_limits(bs);
997 assert(bdrv_opt_mem_align(bs) != 0);
998 assert((bs->request_alignment != 0) || bs->sg);
999 return 0;
1001 free_and_fail:
1002 bs->file = NULL;
1003 g_free(bs->opaque);
1004 bs->opaque = NULL;
1005 bs->drv = NULL;
1006 return ret;
1009 static QDict *parse_json_filename(const char *filename, Error **errp)
1011 QObject *options_obj;
1012 QDict *options;
1013 int ret;
1015 ret = strstart(filename, "json:", &filename);
1016 assert(ret);
1018 options_obj = qobject_from_json(filename);
1019 if (!options_obj) {
1020 error_setg(errp, "Could not parse the JSON options");
1021 return NULL;
1024 if (qobject_type(options_obj) != QTYPE_QDICT) {
1025 qobject_decref(options_obj);
1026 error_setg(errp, "Invalid JSON object given");
1027 return NULL;
1030 options = qobject_to_qdict(options_obj);
1031 qdict_flatten(options);
1033 return options;
1037 * Fills in default options for opening images and converts the legacy
1038 * filename/flags pair to option QDict entries.
1040 static int bdrv_fill_options(QDict **options, const char **pfilename, int flags,
1041 BlockDriver *drv, Error **errp)
1043 const char *filename = *pfilename;
1044 const char *drvname;
1045 bool protocol = flags & BDRV_O_PROTOCOL;
1046 bool parse_filename = false;
1047 Error *local_err = NULL;
1049 /* Parse json: pseudo-protocol */
1050 if (filename && g_str_has_prefix(filename, "json:")) {
1051 QDict *json_options = parse_json_filename(filename, &local_err);
1052 if (local_err) {
1053 error_propagate(errp, local_err);
1054 return -EINVAL;
1057 /* Options given in the filename have lower priority than options
1058 * specified directly */
1059 qdict_join(*options, json_options, false);
1060 QDECREF(json_options);
1061 *pfilename = filename = NULL;
1064 /* Fetch the file name from the options QDict if necessary */
1065 if (protocol && filename) {
1066 if (!qdict_haskey(*options, "filename")) {
1067 qdict_put(*options, "filename", qstring_from_str(filename));
1068 parse_filename = true;
1069 } else {
1070 error_setg(errp, "Can't specify 'file' and 'filename' options at "
1071 "the same time");
1072 return -EINVAL;
1076 /* Find the right block driver */
1077 filename = qdict_get_try_str(*options, "filename");
1078 drvname = qdict_get_try_str(*options, "driver");
1080 if (drv) {
1081 if (drvname) {
1082 error_setg(errp, "Driver specified twice");
1083 return -EINVAL;
1085 drvname = drv->format_name;
1086 qdict_put(*options, "driver", qstring_from_str(drvname));
1087 } else {
1088 if (!drvname && protocol) {
1089 if (filename) {
1090 drv = bdrv_find_protocol(filename, parse_filename);
1091 if (!drv) {
1092 error_setg(errp, "Unknown protocol");
1093 return -EINVAL;
1096 drvname = drv->format_name;
1097 qdict_put(*options, "driver", qstring_from_str(drvname));
1098 } else {
1099 error_setg(errp, "Must specify either driver or file");
1100 return -EINVAL;
1102 } else if (drvname) {
1103 drv = bdrv_find_format(drvname);
1104 if (!drv) {
1105 error_setg(errp, "Unknown driver '%s'", drvname);
1106 return -ENOENT;
1111 assert(drv || !protocol);
1113 /* Driver-specific filename parsing */
1114 if (drv && drv->bdrv_parse_filename && parse_filename) {
1115 drv->bdrv_parse_filename(filename, *options, &local_err);
1116 if (local_err) {
1117 error_propagate(errp, local_err);
1118 return -EINVAL;
1121 if (!drv->bdrv_needs_filename) {
1122 qdict_del(*options, "filename");
1126 return 0;
1129 void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
1132 if (bs->backing_hd) {
1133 assert(bs->backing_blocker);
1134 bdrv_op_unblock_all(bs->backing_hd, bs->backing_blocker);
1135 } else if (backing_hd) {
1136 error_setg(&bs->backing_blocker,
1137 "device is used as backing hd of '%s'",
1138 bs->device_name);
1141 bs->backing_hd = backing_hd;
1142 if (!backing_hd) {
1143 error_free(bs->backing_blocker);
1144 bs->backing_blocker = NULL;
1145 goto out;
1147 bs->open_flags &= ~BDRV_O_NO_BACKING;
1148 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename);
1149 pstrcpy(bs->backing_format, sizeof(bs->backing_format),
1150 backing_hd->drv ? backing_hd->drv->format_name : "");
1152 bdrv_op_block_all(bs->backing_hd, bs->backing_blocker);
1153 /* Otherwise we won't be able to commit due to check in bdrv_commit */
1154 bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_COMMIT,
1155 bs->backing_blocker);
1156 out:
1157 bdrv_refresh_limits(bs);
1161 * Opens the backing file for a BlockDriverState if not yet open
1163 * options is a QDict of options to pass to the block drivers, or NULL for an
1164 * empty set of options. The reference to the QDict is transferred to this
1165 * function (even on failure), so if the caller intends to reuse the dictionary,
1166 * it needs to use QINCREF() before calling bdrv_file_open.
1168 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1170 char *backing_filename = g_malloc0(PATH_MAX);
1171 int ret = 0;
1172 BlockDriver *back_drv = NULL;
1173 BlockDriverState *backing_hd;
1174 Error *local_err = NULL;
1176 if (bs->backing_hd != NULL) {
1177 QDECREF(options);
1178 goto free_exit;
1181 /* NULL means an empty set of options */
1182 if (options == NULL) {
1183 options = qdict_new();
1186 bs->open_flags &= ~BDRV_O_NO_BACKING;
1187 if (qdict_haskey(options, "file.filename")) {
1188 backing_filename[0] = '\0';
1189 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1190 QDECREF(options);
1191 goto free_exit;
1192 } else {
1193 bdrv_get_full_backing_filename(bs, backing_filename, PATH_MAX);
1196 if (!bs->drv || !bs->drv->supports_backing) {
1197 ret = -EINVAL;
1198 error_setg(errp, "Driver doesn't support backing files");
1199 QDECREF(options);
1200 goto free_exit;
1203 backing_hd = bdrv_new("", errp);
1205 if (bs->backing_format[0] != '\0') {
1206 back_drv = bdrv_find_format(bs->backing_format);
1209 assert(bs->backing_hd == NULL);
1210 ret = bdrv_open(&backing_hd,
1211 *backing_filename ? backing_filename : NULL, NULL, options,
1212 bdrv_backing_flags(bs->open_flags), back_drv, &local_err);
1213 if (ret < 0) {
1214 bdrv_unref(backing_hd);
1215 backing_hd = NULL;
1216 bs->open_flags |= BDRV_O_NO_BACKING;
1217 error_setg(errp, "Could not open backing file: %s",
1218 error_get_pretty(local_err));
1219 error_free(local_err);
1220 goto free_exit;
1222 bdrv_set_backing_hd(bs, backing_hd);
1224 free_exit:
1225 g_free(backing_filename);
1226 return ret;
1230 * Opens a disk image whose options are given as BlockdevRef in another block
1231 * device's options.
1233 * If allow_none is true, no image will be opened if filename is false and no
1234 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1236 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1237 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1238 * itself, all options starting with "${bdref_key}." are considered part of the
1239 * BlockdevRef.
1241 * The BlockdevRef will be removed from the options QDict.
1243 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1245 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1246 QDict *options, const char *bdref_key, int flags,
1247 bool allow_none, Error **errp)
1249 QDict *image_options;
1250 int ret;
1251 char *bdref_key_dot;
1252 const char *reference;
1254 assert(pbs);
1255 assert(*pbs == NULL);
1257 bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1258 qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1259 g_free(bdref_key_dot);
1261 reference = qdict_get_try_str(options, bdref_key);
1262 if (!filename && !reference && !qdict_size(image_options)) {
1263 if (allow_none) {
1264 ret = 0;
1265 } else {
1266 error_setg(errp, "A block device must be specified for \"%s\"",
1267 bdref_key);
1268 ret = -EINVAL;
1270 QDECREF(image_options);
1271 goto done;
1274 ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp);
1276 done:
1277 qdict_del(options, bdref_key);
1278 return ret;
1281 int bdrv_append_temp_snapshot(BlockDriverState *bs, int flags, Error **errp)
1283 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1284 char *tmp_filename = g_malloc0(PATH_MAX + 1);
1285 int64_t total_size;
1286 BlockDriver *bdrv_qcow2;
1287 QemuOpts *opts = NULL;
1288 QDict *snapshot_options;
1289 BlockDriverState *bs_snapshot;
1290 Error *local_err;
1291 int ret;
1293 /* if snapshot, we create a temporary backing file and open it
1294 instead of opening 'filename' directly */
1296 /* Get the required size from the image */
1297 total_size = bdrv_getlength(bs);
1298 if (total_size < 0) {
1299 ret = total_size;
1300 error_setg_errno(errp, -total_size, "Could not get image size");
1301 goto out;
1303 total_size &= BDRV_SECTOR_MASK;
1305 /* Create the temporary image */
1306 ret = get_tmp_filename(tmp_filename, PATH_MAX + 1);
1307 if (ret < 0) {
1308 error_setg_errno(errp, -ret, "Could not get temporary filename");
1309 goto out;
1312 bdrv_qcow2 = bdrv_find_format("qcow2");
1313 opts = qemu_opts_create(bdrv_qcow2->create_opts, NULL, 0,
1314 &error_abort);
1315 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, total_size);
1316 ret = bdrv_create(bdrv_qcow2, tmp_filename, opts, &local_err);
1317 qemu_opts_del(opts);
1318 if (ret < 0) {
1319 error_setg_errno(errp, -ret, "Could not create temporary overlay "
1320 "'%s': %s", tmp_filename,
1321 error_get_pretty(local_err));
1322 error_free(local_err);
1323 goto out;
1326 /* Prepare a new options QDict for the temporary file */
1327 snapshot_options = qdict_new();
1328 qdict_put(snapshot_options, "file.driver",
1329 qstring_from_str("file"));
1330 qdict_put(snapshot_options, "file.filename",
1331 qstring_from_str(tmp_filename));
1333 bs_snapshot = bdrv_new("", &error_abort);
1335 ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
1336 flags, bdrv_qcow2, &local_err);
1337 if (ret < 0) {
1338 error_propagate(errp, local_err);
1339 goto out;
1342 bdrv_append(bs_snapshot, bs);
1344 out:
1345 g_free(tmp_filename);
1346 return ret;
1350 * Opens a disk image (raw, qcow2, vmdk, ...)
1352 * options is a QDict of options to pass to the block drivers, or NULL for an
1353 * empty set of options. The reference to the QDict belongs to the block layer
1354 * after the call (even on failure), so if the caller intends to reuse the
1355 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1357 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1358 * If it is not NULL, the referenced BDS will be reused.
1360 * The reference parameter may be used to specify an existing block device which
1361 * should be opened. If specified, neither options nor a filename may be given,
1362 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1364 int bdrv_open(BlockDriverState **pbs, const char *filename,
1365 const char *reference, QDict *options, int flags,
1366 BlockDriver *drv, Error **errp)
1368 int ret;
1369 BlockDriverState *file = NULL, *bs;
1370 const char *drvname;
1371 Error *local_err = NULL;
1372 int snapshot_flags = 0;
1374 assert(pbs);
1376 if (reference) {
1377 bool options_non_empty = options ? qdict_size(options) : false;
1378 QDECREF(options);
1380 if (*pbs) {
1381 error_setg(errp, "Cannot reuse an existing BDS when referencing "
1382 "another block device");
1383 return -EINVAL;
1386 if (filename || options_non_empty) {
1387 error_setg(errp, "Cannot reference an existing block device with "
1388 "additional options or a new filename");
1389 return -EINVAL;
1392 bs = bdrv_lookup_bs(reference, reference, errp);
1393 if (!bs) {
1394 return -ENODEV;
1396 bdrv_ref(bs);
1397 *pbs = bs;
1398 return 0;
1401 if (*pbs) {
1402 bs = *pbs;
1403 } else {
1404 bs = bdrv_new("", &error_abort);
1407 /* NULL means an empty set of options */
1408 if (options == NULL) {
1409 options = qdict_new();
1412 ret = bdrv_fill_options(&options, &filename, flags, drv, &local_err);
1413 if (local_err) {
1414 goto fail;
1417 /* Find the right image format driver */
1418 drv = NULL;
1419 drvname = qdict_get_try_str(options, "driver");
1420 if (drvname) {
1421 drv = bdrv_find_format(drvname);
1422 qdict_del(options, "driver");
1423 if (!drv) {
1424 error_setg(errp, "Unknown driver: '%s'", drvname);
1425 ret = -EINVAL;
1426 goto fail;
1430 assert(drvname || !(flags & BDRV_O_PROTOCOL));
1431 if (drv && !drv->bdrv_file_open) {
1432 /* If the user explicitly wants a format driver here, we'll need to add
1433 * another layer for the protocol in bs->file */
1434 flags &= ~BDRV_O_PROTOCOL;
1437 bs->options = options;
1438 options = qdict_clone_shallow(options);
1440 /* Open image file without format layer */
1441 if ((flags & BDRV_O_PROTOCOL) == 0) {
1442 if (flags & BDRV_O_RDWR) {
1443 flags |= BDRV_O_ALLOW_RDWR;
1445 if (flags & BDRV_O_SNAPSHOT) {
1446 snapshot_flags = bdrv_temp_snapshot_flags(flags);
1447 flags = bdrv_backing_flags(flags);
1450 assert(file == NULL);
1451 ret = bdrv_open_image(&file, filename, options, "file",
1452 bdrv_inherited_flags(flags),
1453 true, &local_err);
1454 if (ret < 0) {
1455 goto fail;
1459 /* Image format probing */
1460 if (!drv && file) {
1461 ret = find_image_format(file, filename, &drv, &local_err);
1462 if (ret < 0) {
1463 goto fail;
1465 } else if (!drv) {
1466 error_setg(errp, "Must specify either driver or file");
1467 ret = -EINVAL;
1468 goto fail;
1471 /* Open the image */
1472 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1473 if (ret < 0) {
1474 goto fail;
1477 if (file && (bs->file != file)) {
1478 bdrv_unref(file);
1479 file = NULL;
1482 /* If there is a backing file, use it */
1483 if ((flags & BDRV_O_NO_BACKING) == 0) {
1484 QDict *backing_options;
1486 qdict_extract_subqdict(options, &backing_options, "backing.");
1487 ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1488 if (ret < 0) {
1489 goto close_and_fail;
1493 /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1494 * temporary snapshot afterwards. */
1495 if (snapshot_flags) {
1496 ret = bdrv_append_temp_snapshot(bs, snapshot_flags, &local_err);
1497 if (local_err) {
1498 goto close_and_fail;
1502 /* Check if any unknown options were used */
1503 if (options && (qdict_size(options) != 0)) {
1504 const QDictEntry *entry = qdict_first(options);
1505 if (flags & BDRV_O_PROTOCOL) {
1506 error_setg(errp, "Block protocol '%s' doesn't support the option "
1507 "'%s'", drv->format_name, entry->key);
1508 } else {
1509 error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1510 "support the option '%s'", drv->format_name,
1511 bs->device_name, entry->key);
1514 ret = -EINVAL;
1515 goto close_and_fail;
1518 if (!bdrv_key_required(bs)) {
1519 bdrv_dev_change_media_cb(bs, true);
1520 } else if (!runstate_check(RUN_STATE_PRELAUNCH)
1521 && !runstate_check(RUN_STATE_INMIGRATE)
1522 && !runstate_check(RUN_STATE_PAUSED)) { /* HACK */
1523 error_setg(errp,
1524 "Guest must be stopped for opening of encrypted image");
1525 ret = -EBUSY;
1526 goto close_and_fail;
1529 QDECREF(options);
1530 *pbs = bs;
1531 return 0;
1533 fail:
1534 if (file != NULL) {
1535 bdrv_unref(file);
1537 QDECREF(bs->options);
1538 QDECREF(options);
1539 bs->options = NULL;
1540 if (!*pbs) {
1541 /* If *pbs is NULL, a new BDS has been created in this function and
1542 needs to be freed now. Otherwise, it does not need to be closed,
1543 since it has not really been opened yet. */
1544 bdrv_unref(bs);
1546 if (local_err) {
1547 error_propagate(errp, local_err);
1549 return ret;
1551 close_and_fail:
1552 /* See fail path, but now the BDS has to be always closed */
1553 if (*pbs) {
1554 bdrv_close(bs);
1555 } else {
1556 bdrv_unref(bs);
1558 QDECREF(options);
1559 if (local_err) {
1560 error_propagate(errp, local_err);
1562 return ret;
1565 typedef struct BlockReopenQueueEntry {
1566 bool prepared;
1567 BDRVReopenState state;
1568 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1569 } BlockReopenQueueEntry;
1572 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1573 * reopen of multiple devices.
1575 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1576 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1577 * be created and initialized. This newly created BlockReopenQueue should be
1578 * passed back in for subsequent calls that are intended to be of the same
1579 * atomic 'set'.
1581 * bs is the BlockDriverState to add to the reopen queue.
1583 * flags contains the open flags for the associated bs
1585 * returns a pointer to bs_queue, which is either the newly allocated
1586 * bs_queue, or the existing bs_queue being used.
1589 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1590 BlockDriverState *bs, int flags)
1592 assert(bs != NULL);
1594 BlockReopenQueueEntry *bs_entry;
1595 if (bs_queue == NULL) {
1596 bs_queue = g_new0(BlockReopenQueue, 1);
1597 QSIMPLEQ_INIT(bs_queue);
1600 /* bdrv_open() masks this flag out */
1601 flags &= ~BDRV_O_PROTOCOL;
1603 if (bs->file) {
1604 bdrv_reopen_queue(bs_queue, bs->file, bdrv_inherited_flags(flags));
1607 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1608 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1610 bs_entry->state.bs = bs;
1611 bs_entry->state.flags = flags;
1613 return bs_queue;
1617 * Reopen multiple BlockDriverStates atomically & transactionally.
1619 * The queue passed in (bs_queue) must have been built up previous
1620 * via bdrv_reopen_queue().
1622 * Reopens all BDS specified in the queue, with the appropriate
1623 * flags. All devices are prepared for reopen, and failure of any
1624 * device will cause all device changes to be abandonded, and intermediate
1625 * data cleaned up.
1627 * If all devices prepare successfully, then the changes are committed
1628 * to all devices.
1631 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1633 int ret = -1;
1634 BlockReopenQueueEntry *bs_entry, *next;
1635 Error *local_err = NULL;
1637 assert(bs_queue != NULL);
1639 bdrv_drain_all();
1641 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1642 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1643 error_propagate(errp, local_err);
1644 goto cleanup;
1646 bs_entry->prepared = true;
1649 /* If we reach this point, we have success and just need to apply the
1650 * changes
1652 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1653 bdrv_reopen_commit(&bs_entry->state);
1656 ret = 0;
1658 cleanup:
1659 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1660 if (ret && bs_entry->prepared) {
1661 bdrv_reopen_abort(&bs_entry->state);
1663 g_free(bs_entry);
1665 g_free(bs_queue);
1666 return ret;
1670 /* Reopen a single BlockDriverState with the specified flags. */
1671 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1673 int ret = -1;
1674 Error *local_err = NULL;
1675 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1677 ret = bdrv_reopen_multiple(queue, &local_err);
1678 if (local_err != NULL) {
1679 error_propagate(errp, local_err);
1681 return ret;
1686 * Prepares a BlockDriverState for reopen. All changes are staged in the
1687 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1688 * the block driver layer .bdrv_reopen_prepare()
1690 * bs is the BlockDriverState to reopen
1691 * flags are the new open flags
1692 * queue is the reopen queue
1694 * Returns 0 on success, non-zero on error. On error errp will be set
1695 * as well.
1697 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1698 * It is the responsibility of the caller to then call the abort() or
1699 * commit() for any other BDS that have been left in a prepare() state
1702 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1703 Error **errp)
1705 int ret = -1;
1706 Error *local_err = NULL;
1707 BlockDriver *drv;
1709 assert(reopen_state != NULL);
1710 assert(reopen_state->bs->drv != NULL);
1711 drv = reopen_state->bs->drv;
1713 /* if we are to stay read-only, do not allow permission change
1714 * to r/w */
1715 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1716 reopen_state->flags & BDRV_O_RDWR) {
1717 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1718 reopen_state->bs->device_name);
1719 goto error;
1723 ret = bdrv_flush(reopen_state->bs);
1724 if (ret) {
1725 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1726 strerror(-ret));
1727 goto error;
1730 if (drv->bdrv_reopen_prepare) {
1731 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1732 if (ret) {
1733 if (local_err != NULL) {
1734 error_propagate(errp, local_err);
1735 } else {
1736 error_setg(errp, "failed while preparing to reopen image '%s'",
1737 reopen_state->bs->filename);
1739 goto error;
1741 } else {
1742 /* It is currently mandatory to have a bdrv_reopen_prepare()
1743 * handler for each supported drv. */
1744 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1745 drv->format_name, reopen_state->bs->device_name,
1746 "reopening of file");
1747 ret = -1;
1748 goto error;
1751 ret = 0;
1753 error:
1754 return ret;
1758 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1759 * makes them final by swapping the staging BlockDriverState contents into
1760 * the active BlockDriverState contents.
1762 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1764 BlockDriver *drv;
1766 assert(reopen_state != NULL);
1767 drv = reopen_state->bs->drv;
1768 assert(drv != NULL);
1770 /* If there are any driver level actions to take */
1771 if (drv->bdrv_reopen_commit) {
1772 drv->bdrv_reopen_commit(reopen_state);
1775 /* set BDS specific flags now */
1776 reopen_state->bs->open_flags = reopen_state->flags;
1777 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1778 BDRV_O_CACHE_WB);
1779 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1781 bdrv_refresh_limits(reopen_state->bs);
1785 * Abort the reopen, and delete and free the staged changes in
1786 * reopen_state
1788 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1790 BlockDriver *drv;
1792 assert(reopen_state != NULL);
1793 drv = reopen_state->bs->drv;
1794 assert(drv != NULL);
1796 if (drv->bdrv_reopen_abort) {
1797 drv->bdrv_reopen_abort(reopen_state);
1802 void bdrv_close(BlockDriverState *bs)
1804 if (bs->job) {
1805 block_job_cancel_sync(bs->job);
1807 bdrv_drain_all(); /* complete I/O */
1808 bdrv_flush(bs);
1809 bdrv_drain_all(); /* in case flush left pending I/O */
1810 notifier_list_notify(&bs->close_notifiers, bs);
1812 if (bs->drv) {
1813 if (bs->backing_hd) {
1814 BlockDriverState *backing_hd = bs->backing_hd;
1815 bdrv_set_backing_hd(bs, NULL);
1816 bdrv_unref(backing_hd);
1818 bs->drv->bdrv_close(bs);
1819 g_free(bs->opaque);
1820 bs->opaque = NULL;
1821 bs->drv = NULL;
1822 bs->copy_on_read = 0;
1823 bs->backing_file[0] = '\0';
1824 bs->backing_format[0] = '\0';
1825 bs->total_sectors = 0;
1826 bs->encrypted = 0;
1827 bs->valid_key = 0;
1828 bs->sg = 0;
1829 bs->growable = 0;
1830 bs->zero_beyond_eof = false;
1831 QDECREF(bs->options);
1832 bs->options = NULL;
1834 if (bs->file != NULL) {
1835 bdrv_unref(bs->file);
1836 bs->file = NULL;
1840 bdrv_dev_change_media_cb(bs, false);
1842 /*throttling disk I/O limits*/
1843 if (bs->io_limits_enabled) {
1844 bdrv_io_limits_disable(bs);
1848 void bdrv_close_all(void)
1850 BlockDriverState *bs;
1852 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1853 AioContext *aio_context = bdrv_get_aio_context(bs);
1855 aio_context_acquire(aio_context);
1856 bdrv_close(bs);
1857 aio_context_release(aio_context);
1861 /* Check if any requests are in-flight (including throttled requests) */
1862 static bool bdrv_requests_pending(BlockDriverState *bs)
1864 if (!QLIST_EMPTY(&bs->tracked_requests)) {
1865 return true;
1867 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1868 return true;
1870 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1871 return true;
1873 if (bs->file && bdrv_requests_pending(bs->file)) {
1874 return true;
1876 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1877 return true;
1879 return false;
1883 * Wait for pending requests to complete across all BlockDriverStates
1885 * This function does not flush data to disk, use bdrv_flush_all() for that
1886 * after calling this function.
1888 * Note that completion of an asynchronous I/O operation can trigger any
1889 * number of other I/O operations on other devices---for example a coroutine
1890 * can be arbitrarily complex and a constant flow of I/O can come until the
1891 * coroutine is complete. Because of this, it is not possible to have a
1892 * function to drain a single device's I/O queue.
1894 void bdrv_drain_all(void)
1896 /* Always run first iteration so any pending completion BHs run */
1897 bool busy = true;
1898 BlockDriverState *bs;
1900 while (busy) {
1901 busy = false;
1903 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1904 AioContext *aio_context = bdrv_get_aio_context(bs);
1905 bool bs_busy;
1907 aio_context_acquire(aio_context);
1908 bdrv_start_throttled_reqs(bs);
1909 bs_busy = bdrv_requests_pending(bs);
1910 bs_busy |= aio_poll(aio_context, bs_busy);
1911 aio_context_release(aio_context);
1913 busy |= bs_busy;
1918 /* make a BlockDriverState anonymous by removing from bdrv_state and
1919 * graph_bdrv_state list.
1920 Also, NULL terminate the device_name to prevent double remove */
1921 void bdrv_make_anon(BlockDriverState *bs)
1923 if (bs->device_name[0] != '\0') {
1924 QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1926 bs->device_name[0] = '\0';
1927 if (bs->node_name[0] != '\0') {
1928 QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1930 bs->node_name[0] = '\0';
1933 static void bdrv_rebind(BlockDriverState *bs)
1935 if (bs->drv && bs->drv->bdrv_rebind) {
1936 bs->drv->bdrv_rebind(bs);
1940 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1941 BlockDriverState *bs_src)
1943 /* move some fields that need to stay attached to the device */
1945 /* dev info */
1946 bs_dest->dev_ops = bs_src->dev_ops;
1947 bs_dest->dev_opaque = bs_src->dev_opaque;
1948 bs_dest->dev = bs_src->dev;
1949 bs_dest->guest_block_size = bs_src->guest_block_size;
1950 bs_dest->copy_on_read = bs_src->copy_on_read;
1952 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1954 /* i/o throttled req */
1955 memcpy(&bs_dest->throttle_state,
1956 &bs_src->throttle_state,
1957 sizeof(ThrottleState));
1958 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0];
1959 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1];
1960 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1962 /* r/w error */
1963 bs_dest->on_read_error = bs_src->on_read_error;
1964 bs_dest->on_write_error = bs_src->on_write_error;
1966 /* i/o status */
1967 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1968 bs_dest->iostatus = bs_src->iostatus;
1970 /* dirty bitmap */
1971 bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps;
1973 /* reference count */
1974 bs_dest->refcnt = bs_src->refcnt;
1976 /* job */
1977 bs_dest->job = bs_src->job;
1979 /* keep the same entry in bdrv_states */
1980 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1981 bs_src->device_name);
1982 bs_dest->device_list = bs_src->device_list;
1983 memcpy(bs_dest->op_blockers, bs_src->op_blockers,
1984 sizeof(bs_dest->op_blockers));
1988 * Swap bs contents for two image chains while they are live,
1989 * while keeping required fields on the BlockDriverState that is
1990 * actually attached to a device.
1992 * This will modify the BlockDriverState fields, and swap contents
1993 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1995 * bs_new is required to be anonymous.
1997 * This function does not create any image files.
1999 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
2001 BlockDriverState tmp;
2003 /* The code needs to swap the node_name but simply swapping node_list won't
2004 * work so first remove the nodes from the graph list, do the swap then
2005 * insert them back if needed.
2007 if (bs_new->node_name[0] != '\0') {
2008 QTAILQ_REMOVE(&graph_bdrv_states, bs_new, node_list);
2010 if (bs_old->node_name[0] != '\0') {
2011 QTAILQ_REMOVE(&graph_bdrv_states, bs_old, node_list);
2014 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
2015 assert(bs_new->device_name[0] == '\0');
2016 assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
2017 assert(bs_new->job == NULL);
2018 assert(bs_new->dev == NULL);
2019 assert(bs_new->io_limits_enabled == false);
2020 assert(!throttle_have_timer(&bs_new->throttle_state));
2022 tmp = *bs_new;
2023 *bs_new = *bs_old;
2024 *bs_old = tmp;
2026 /* there are some fields that should not be swapped, move them back */
2027 bdrv_move_feature_fields(&tmp, bs_old);
2028 bdrv_move_feature_fields(bs_old, bs_new);
2029 bdrv_move_feature_fields(bs_new, &tmp);
2031 /* bs_new shouldn't be in bdrv_states even after the swap! */
2032 assert(bs_new->device_name[0] == '\0');
2034 /* Check a few fields that should remain attached to the device */
2035 assert(bs_new->dev == NULL);
2036 assert(bs_new->job == NULL);
2037 assert(bs_new->io_limits_enabled == false);
2038 assert(!throttle_have_timer(&bs_new->throttle_state));
2040 /* insert the nodes back into the graph node list if needed */
2041 if (bs_new->node_name[0] != '\0') {
2042 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_new, node_list);
2044 if (bs_old->node_name[0] != '\0') {
2045 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_old, node_list);
2048 bdrv_rebind(bs_new);
2049 bdrv_rebind(bs_old);
2053 * Add new bs contents at the top of an image chain while the chain is
2054 * live, while keeping required fields on the top layer.
2056 * This will modify the BlockDriverState fields, and swap contents
2057 * between bs_new and bs_top. Both bs_new and bs_top are modified.
2059 * bs_new is required to be anonymous.
2061 * This function does not create any image files.
2063 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
2065 bdrv_swap(bs_new, bs_top);
2067 /* The contents of 'tmp' will become bs_top, as we are
2068 * swapping bs_new and bs_top contents. */
2069 bdrv_set_backing_hd(bs_top, bs_new);
2072 static void bdrv_delete(BlockDriverState *bs)
2074 assert(!bs->dev);
2075 assert(!bs->job);
2076 assert(bdrv_op_blocker_is_empty(bs));
2077 assert(!bs->refcnt);
2078 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
2080 bdrv_close(bs);
2082 /* remove from list, if necessary */
2083 bdrv_make_anon(bs);
2085 g_free(bs);
2088 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
2089 /* TODO change to DeviceState *dev when all users are qdevified */
2091 if (bs->dev) {
2092 return -EBUSY;
2094 bs->dev = dev;
2095 bdrv_iostatus_reset(bs);
2096 return 0;
2099 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2100 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
2102 if (bdrv_attach_dev(bs, dev) < 0) {
2103 abort();
2107 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
2108 /* TODO change to DeviceState *dev when all users are qdevified */
2110 assert(bs->dev == dev);
2111 bs->dev = NULL;
2112 bs->dev_ops = NULL;
2113 bs->dev_opaque = NULL;
2114 bs->guest_block_size = 512;
2117 /* TODO change to return DeviceState * when all users are qdevified */
2118 void *bdrv_get_attached_dev(BlockDriverState *bs)
2120 return bs->dev;
2123 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
2124 void *opaque)
2126 bs->dev_ops = ops;
2127 bs->dev_opaque = opaque;
2130 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2132 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2133 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2134 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2135 if (tray_was_closed) {
2136 /* tray open */
2137 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2138 true, &error_abort);
2140 if (load) {
2141 /* tray close */
2142 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2143 false, &error_abort);
2148 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2150 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2153 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2155 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2156 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2160 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2162 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2163 return bs->dev_ops->is_tray_open(bs->dev_opaque);
2165 return false;
2168 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2170 if (bs->dev_ops && bs->dev_ops->resize_cb) {
2171 bs->dev_ops->resize_cb(bs->dev_opaque);
2175 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2177 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2178 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2180 return false;
2184 * Run consistency checks on an image
2186 * Returns 0 if the check could be completed (it doesn't mean that the image is
2187 * free of errors) or -errno when an internal error occurred. The results of the
2188 * check are stored in res.
2190 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2192 if (bs->drv->bdrv_check == NULL) {
2193 return -ENOTSUP;
2196 memset(res, 0, sizeof(*res));
2197 return bs->drv->bdrv_check(bs, res, fix);
2200 #define COMMIT_BUF_SECTORS 2048
2202 /* commit COW file into the raw image */
2203 int bdrv_commit(BlockDriverState *bs)
2205 BlockDriver *drv = bs->drv;
2206 int64_t sector, total_sectors, length, backing_length;
2207 int n, ro, open_flags;
2208 int ret = 0;
2209 uint8_t *buf = NULL;
2210 char filename[PATH_MAX];
2212 if (!drv)
2213 return -ENOMEDIUM;
2215 if (!bs->backing_hd) {
2216 return -ENOTSUP;
2219 if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_COMMIT, NULL) ||
2220 bdrv_op_is_blocked(bs->backing_hd, BLOCK_OP_TYPE_COMMIT, NULL)) {
2221 return -EBUSY;
2224 ro = bs->backing_hd->read_only;
2225 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2226 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2227 open_flags = bs->backing_hd->open_flags;
2229 if (ro) {
2230 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2231 return -EACCES;
2235 length = bdrv_getlength(bs);
2236 if (length < 0) {
2237 ret = length;
2238 goto ro_cleanup;
2241 backing_length = bdrv_getlength(bs->backing_hd);
2242 if (backing_length < 0) {
2243 ret = backing_length;
2244 goto ro_cleanup;
2247 /* If our top snapshot is larger than the backing file image,
2248 * grow the backing file image if possible. If not possible,
2249 * we must return an error */
2250 if (length > backing_length) {
2251 ret = bdrv_truncate(bs->backing_hd, length);
2252 if (ret < 0) {
2253 goto ro_cleanup;
2257 total_sectors = length >> BDRV_SECTOR_BITS;
2258 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2260 for (sector = 0; sector < total_sectors; sector += n) {
2261 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2262 if (ret < 0) {
2263 goto ro_cleanup;
2265 if (ret) {
2266 ret = bdrv_read(bs, sector, buf, n);
2267 if (ret < 0) {
2268 goto ro_cleanup;
2271 ret = bdrv_write(bs->backing_hd, sector, buf, n);
2272 if (ret < 0) {
2273 goto ro_cleanup;
2278 if (drv->bdrv_make_empty) {
2279 ret = drv->bdrv_make_empty(bs);
2280 if (ret < 0) {
2281 goto ro_cleanup;
2283 bdrv_flush(bs);
2287 * Make sure all data we wrote to the backing device is actually
2288 * stable on disk.
2290 if (bs->backing_hd) {
2291 bdrv_flush(bs->backing_hd);
2294 ret = 0;
2295 ro_cleanup:
2296 g_free(buf);
2298 if (ro) {
2299 /* ignoring error return here */
2300 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2303 return ret;
2306 int bdrv_commit_all(void)
2308 BlockDriverState *bs;
2310 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2311 AioContext *aio_context = bdrv_get_aio_context(bs);
2313 aio_context_acquire(aio_context);
2314 if (bs->drv && bs->backing_hd) {
2315 int ret = bdrv_commit(bs);
2316 if (ret < 0) {
2317 aio_context_release(aio_context);
2318 return ret;
2321 aio_context_release(aio_context);
2323 return 0;
2327 * Remove an active request from the tracked requests list
2329 * This function should be called when a tracked request is completing.
2331 static void tracked_request_end(BdrvTrackedRequest *req)
2333 if (req->serialising) {
2334 req->bs->serialising_in_flight--;
2337 QLIST_REMOVE(req, list);
2338 qemu_co_queue_restart_all(&req->wait_queue);
2342 * Add an active request to the tracked requests list
2344 static void tracked_request_begin(BdrvTrackedRequest *req,
2345 BlockDriverState *bs,
2346 int64_t offset,
2347 unsigned int bytes, bool is_write)
2349 *req = (BdrvTrackedRequest){
2350 .bs = bs,
2351 .offset = offset,
2352 .bytes = bytes,
2353 .is_write = is_write,
2354 .co = qemu_coroutine_self(),
2355 .serialising = false,
2356 .overlap_offset = offset,
2357 .overlap_bytes = bytes,
2360 qemu_co_queue_init(&req->wait_queue);
2362 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2365 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
2367 int64_t overlap_offset = req->offset & ~(align - 1);
2368 unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2369 - overlap_offset;
2371 if (!req->serialising) {
2372 req->bs->serialising_in_flight++;
2373 req->serialising = true;
2376 req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2377 req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2381 * Round a region to cluster boundaries
2383 void bdrv_round_to_clusters(BlockDriverState *bs,
2384 int64_t sector_num, int nb_sectors,
2385 int64_t *cluster_sector_num,
2386 int *cluster_nb_sectors)
2388 BlockDriverInfo bdi;
2390 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2391 *cluster_sector_num = sector_num;
2392 *cluster_nb_sectors = nb_sectors;
2393 } else {
2394 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2395 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2396 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2397 nb_sectors, c);
2401 static int bdrv_get_cluster_size(BlockDriverState *bs)
2403 BlockDriverInfo bdi;
2404 int ret;
2406 ret = bdrv_get_info(bs, &bdi);
2407 if (ret < 0 || bdi.cluster_size == 0) {
2408 return bs->request_alignment;
2409 } else {
2410 return bdi.cluster_size;
2414 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2415 int64_t offset, unsigned int bytes)
2417 /* aaaa bbbb */
2418 if (offset >= req->overlap_offset + req->overlap_bytes) {
2419 return false;
2421 /* bbbb aaaa */
2422 if (req->overlap_offset >= offset + bytes) {
2423 return false;
2425 return true;
2428 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2430 BlockDriverState *bs = self->bs;
2431 BdrvTrackedRequest *req;
2432 bool retry;
2433 bool waited = false;
2435 if (!bs->serialising_in_flight) {
2436 return false;
2439 do {
2440 retry = false;
2441 QLIST_FOREACH(req, &bs->tracked_requests, list) {
2442 if (req == self || (!req->serialising && !self->serialising)) {
2443 continue;
2445 if (tracked_request_overlaps(req, self->overlap_offset,
2446 self->overlap_bytes))
2448 /* Hitting this means there was a reentrant request, for
2449 * example, a block driver issuing nested requests. This must
2450 * never happen since it means deadlock.
2452 assert(qemu_coroutine_self() != req->co);
2454 /* If the request is already (indirectly) waiting for us, or
2455 * will wait for us as soon as it wakes up, then just go on
2456 * (instead of producing a deadlock in the former case). */
2457 if (!req->waiting_for) {
2458 self->waiting_for = req;
2459 qemu_co_queue_wait(&req->wait_queue);
2460 self->waiting_for = NULL;
2461 retry = true;
2462 waited = true;
2463 break;
2467 } while (retry);
2469 return waited;
2473 * Return values:
2474 * 0 - success
2475 * -EINVAL - backing format specified, but no file
2476 * -ENOSPC - can't update the backing file because no space is left in the
2477 * image file header
2478 * -ENOTSUP - format driver doesn't support changing the backing file
2480 int bdrv_change_backing_file(BlockDriverState *bs,
2481 const char *backing_file, const char *backing_fmt)
2483 BlockDriver *drv = bs->drv;
2484 int ret;
2486 /* Backing file format doesn't make sense without a backing file */
2487 if (backing_fmt && !backing_file) {
2488 return -EINVAL;
2491 if (drv->bdrv_change_backing_file != NULL) {
2492 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2493 } else {
2494 ret = -ENOTSUP;
2497 if (ret == 0) {
2498 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2499 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2501 return ret;
2505 * Finds the image layer in the chain that has 'bs' as its backing file.
2507 * active is the current topmost image.
2509 * Returns NULL if bs is not found in active's image chain,
2510 * or if active == bs.
2512 * Returns the bottommost base image if bs == NULL.
2514 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2515 BlockDriverState *bs)
2517 while (active && bs != active->backing_hd) {
2518 active = active->backing_hd;
2521 return active;
2524 /* Given a BDS, searches for the base layer. */
2525 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
2527 return bdrv_find_overlay(bs, NULL);
2530 typedef struct BlkIntermediateStates {
2531 BlockDriverState *bs;
2532 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2533 } BlkIntermediateStates;
2537 * Drops images above 'base' up to and including 'top', and sets the image
2538 * above 'top' to have base as its backing file.
2540 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2541 * information in 'bs' can be properly updated.
2543 * E.g., this will convert the following chain:
2544 * bottom <- base <- intermediate <- top <- active
2546 * to
2548 * bottom <- base <- active
2550 * It is allowed for bottom==base, in which case it converts:
2552 * base <- intermediate <- top <- active
2554 * to
2556 * base <- active
2558 * If backing_file_str is non-NULL, it will be used when modifying top's
2559 * overlay image metadata.
2561 * Error conditions:
2562 * if active == top, that is considered an error
2565 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2566 BlockDriverState *base, const char *backing_file_str)
2568 BlockDriverState *intermediate;
2569 BlockDriverState *base_bs = NULL;
2570 BlockDriverState *new_top_bs = NULL;
2571 BlkIntermediateStates *intermediate_state, *next;
2572 int ret = -EIO;
2574 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2575 QSIMPLEQ_INIT(&states_to_delete);
2577 if (!top->drv || !base->drv) {
2578 goto exit;
2581 new_top_bs = bdrv_find_overlay(active, top);
2583 if (new_top_bs == NULL) {
2584 /* we could not find the image above 'top', this is an error */
2585 goto exit;
2588 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2589 * to do, no intermediate images */
2590 if (new_top_bs->backing_hd == base) {
2591 ret = 0;
2592 goto exit;
2595 intermediate = top;
2597 /* now we will go down through the list, and add each BDS we find
2598 * into our deletion queue, until we hit the 'base'
2600 while (intermediate) {
2601 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2602 intermediate_state->bs = intermediate;
2603 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2605 if (intermediate->backing_hd == base) {
2606 base_bs = intermediate->backing_hd;
2607 break;
2609 intermediate = intermediate->backing_hd;
2611 if (base_bs == NULL) {
2612 /* something went wrong, we did not end at the base. safely
2613 * unravel everything, and exit with error */
2614 goto exit;
2617 /* success - we can delete the intermediate states, and link top->base */
2618 backing_file_str = backing_file_str ? backing_file_str : base_bs->filename;
2619 ret = bdrv_change_backing_file(new_top_bs, backing_file_str,
2620 base_bs->drv ? base_bs->drv->format_name : "");
2621 if (ret) {
2622 goto exit;
2624 bdrv_set_backing_hd(new_top_bs, base_bs);
2626 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2627 /* so that bdrv_close() does not recursively close the chain */
2628 bdrv_set_backing_hd(intermediate_state->bs, NULL);
2629 bdrv_unref(intermediate_state->bs);
2631 ret = 0;
2633 exit:
2634 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2635 g_free(intermediate_state);
2637 return ret;
2641 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2642 size_t size)
2644 int64_t len;
2646 if (size > INT_MAX) {
2647 return -EIO;
2650 if (!bdrv_is_inserted(bs))
2651 return -ENOMEDIUM;
2653 if (bs->growable)
2654 return 0;
2656 len = bdrv_getlength(bs);
2658 if (offset < 0)
2659 return -EIO;
2661 if ((offset > len) || (len - offset < size))
2662 return -EIO;
2664 return 0;
2667 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2668 int nb_sectors)
2670 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2671 return -EIO;
2674 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2675 nb_sectors * BDRV_SECTOR_SIZE);
2678 typedef struct RwCo {
2679 BlockDriverState *bs;
2680 int64_t offset;
2681 QEMUIOVector *qiov;
2682 bool is_write;
2683 int ret;
2684 BdrvRequestFlags flags;
2685 } RwCo;
2687 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2689 RwCo *rwco = opaque;
2691 if (!rwco->is_write) {
2692 rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
2693 rwco->qiov->size, rwco->qiov,
2694 rwco->flags);
2695 } else {
2696 rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
2697 rwco->qiov->size, rwco->qiov,
2698 rwco->flags);
2703 * Process a vectored synchronous request using coroutines
2705 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
2706 QEMUIOVector *qiov, bool is_write,
2707 BdrvRequestFlags flags)
2709 Coroutine *co;
2710 RwCo rwco = {
2711 .bs = bs,
2712 .offset = offset,
2713 .qiov = qiov,
2714 .is_write = is_write,
2715 .ret = NOT_DONE,
2716 .flags = flags,
2720 * In sync call context, when the vcpu is blocked, this throttling timer
2721 * will not fire; so the I/O throttling function has to be disabled here
2722 * if it has been enabled.
2724 if (bs->io_limits_enabled) {
2725 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2726 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2727 bdrv_io_limits_disable(bs);
2730 if (qemu_in_coroutine()) {
2731 /* Fast-path if already in coroutine context */
2732 bdrv_rw_co_entry(&rwco);
2733 } else {
2734 AioContext *aio_context = bdrv_get_aio_context(bs);
2736 co = qemu_coroutine_create(bdrv_rw_co_entry);
2737 qemu_coroutine_enter(co, &rwco);
2738 while (rwco.ret == NOT_DONE) {
2739 aio_poll(aio_context, true);
2742 return rwco.ret;
2746 * Process a synchronous request using coroutines
2748 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2749 int nb_sectors, bool is_write, BdrvRequestFlags flags)
2751 QEMUIOVector qiov;
2752 struct iovec iov = {
2753 .iov_base = (void *)buf,
2754 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2757 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2758 return -EINVAL;
2761 qemu_iovec_init_external(&qiov, &iov, 1);
2762 return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
2763 &qiov, is_write, flags);
2766 /* return < 0 if error. See bdrv_write() for the return codes */
2767 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2768 uint8_t *buf, int nb_sectors)
2770 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2773 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2774 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2775 uint8_t *buf, int nb_sectors)
2777 bool enabled;
2778 int ret;
2780 enabled = bs->io_limits_enabled;
2781 bs->io_limits_enabled = false;
2782 ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2783 bs->io_limits_enabled = enabled;
2784 return ret;
2787 /* Return < 0 if error. Important errors are:
2788 -EIO generic I/O error (may happen for all errors)
2789 -ENOMEDIUM No media inserted.
2790 -EINVAL Invalid sector number or nb_sectors
2791 -EACCES Trying to write a read-only device
2793 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2794 const uint8_t *buf, int nb_sectors)
2796 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2799 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2800 int nb_sectors, BdrvRequestFlags flags)
2802 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2803 BDRV_REQ_ZERO_WRITE | flags);
2807 * Completely zero out a block device with the help of bdrv_write_zeroes.
2808 * The operation is sped up by checking the block status and only writing
2809 * zeroes to the device if they currently do not return zeroes. Optional
2810 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2812 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2814 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2816 int64_t target_size;
2817 int64_t ret, nb_sectors, sector_num = 0;
2818 int n;
2820 target_size = bdrv_getlength(bs);
2821 if (target_size < 0) {
2822 return target_size;
2824 target_size /= BDRV_SECTOR_SIZE;
2826 for (;;) {
2827 nb_sectors = target_size - sector_num;
2828 if (nb_sectors <= 0) {
2829 return 0;
2831 if (nb_sectors > INT_MAX) {
2832 nb_sectors = INT_MAX;
2834 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2835 if (ret < 0) {
2836 error_report("error getting block status at sector %" PRId64 ": %s",
2837 sector_num, strerror(-ret));
2838 return ret;
2840 if (ret & BDRV_BLOCK_ZERO) {
2841 sector_num += n;
2842 continue;
2844 ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2845 if (ret < 0) {
2846 error_report("error writing zeroes at sector %" PRId64 ": %s",
2847 sector_num, strerror(-ret));
2848 return ret;
2850 sector_num += n;
2854 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
2856 QEMUIOVector qiov;
2857 struct iovec iov = {
2858 .iov_base = (void *)buf,
2859 .iov_len = bytes,
2861 int ret;
2863 if (bytes < 0) {
2864 return -EINVAL;
2867 qemu_iovec_init_external(&qiov, &iov, 1);
2868 ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
2869 if (ret < 0) {
2870 return ret;
2873 return bytes;
2876 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2878 int ret;
2880 ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
2881 if (ret < 0) {
2882 return ret;
2885 return qiov->size;
2888 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2889 const void *buf, int bytes)
2891 QEMUIOVector qiov;
2892 struct iovec iov = {
2893 .iov_base = (void *) buf,
2894 .iov_len = bytes,
2897 if (bytes < 0) {
2898 return -EINVAL;
2901 qemu_iovec_init_external(&qiov, &iov, 1);
2902 return bdrv_pwritev(bs, offset, &qiov);
2906 * Writes to the file and ensures that no writes are reordered across this
2907 * request (acts as a barrier)
2909 * Returns 0 on success, -errno in error cases.
2911 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2912 const void *buf, int count)
2914 int ret;
2916 ret = bdrv_pwrite(bs, offset, buf, count);
2917 if (ret < 0) {
2918 return ret;
2921 /* No flush needed for cache modes that already do it */
2922 if (bs->enable_write_cache) {
2923 bdrv_flush(bs);
2926 return 0;
2929 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2930 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2932 /* Perform I/O through a temporary buffer so that users who scribble over
2933 * their read buffer while the operation is in progress do not end up
2934 * modifying the image file. This is critical for zero-copy guest I/O
2935 * where anything might happen inside guest memory.
2937 void *bounce_buffer;
2939 BlockDriver *drv = bs->drv;
2940 struct iovec iov;
2941 QEMUIOVector bounce_qiov;
2942 int64_t cluster_sector_num;
2943 int cluster_nb_sectors;
2944 size_t skip_bytes;
2945 int ret;
2947 /* Cover entire cluster so no additional backing file I/O is required when
2948 * allocating cluster in the image file.
2950 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2951 &cluster_sector_num, &cluster_nb_sectors);
2953 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2954 cluster_sector_num, cluster_nb_sectors);
2956 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2957 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2958 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2960 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2961 &bounce_qiov);
2962 if (ret < 0) {
2963 goto err;
2966 if (drv->bdrv_co_write_zeroes &&
2967 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2968 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2969 cluster_nb_sectors, 0);
2970 } else {
2971 /* This does not change the data on the disk, it is not necessary
2972 * to flush even in cache=writethrough mode.
2974 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2975 &bounce_qiov);
2978 if (ret < 0) {
2979 /* It might be okay to ignore write errors for guest requests. If this
2980 * is a deliberate copy-on-read then we don't want to ignore the error.
2981 * Simply report it in all cases.
2983 goto err;
2986 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2987 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2988 nb_sectors * BDRV_SECTOR_SIZE);
2990 err:
2991 qemu_vfree(bounce_buffer);
2992 return ret;
2996 * Forwards an already correctly aligned request to the BlockDriver. This
2997 * handles copy on read and zeroing after EOF; any other features must be
2998 * implemented by the caller.
3000 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
3001 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3002 int64_t align, QEMUIOVector *qiov, int flags)
3004 BlockDriver *drv = bs->drv;
3005 int ret;
3007 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3008 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3010 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3011 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3013 /* Handle Copy on Read and associated serialisation */
3014 if (flags & BDRV_REQ_COPY_ON_READ) {
3015 /* If we touch the same cluster it counts as an overlap. This
3016 * guarantees that allocating writes will be serialized and not race
3017 * with each other for the same cluster. For example, in copy-on-read
3018 * it ensures that the CoR read and write operations are atomic and
3019 * guest writes cannot interleave between them. */
3020 mark_request_serialising(req, bdrv_get_cluster_size(bs));
3023 wait_serialising_requests(req);
3025 if (flags & BDRV_REQ_COPY_ON_READ) {
3026 int pnum;
3028 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
3029 if (ret < 0) {
3030 goto out;
3033 if (!ret || pnum != nb_sectors) {
3034 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
3035 goto out;
3039 /* Forward the request to the BlockDriver */
3040 if (!(bs->zero_beyond_eof && bs->growable)) {
3041 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
3042 } else {
3043 /* Read zeros after EOF of growable BDSes */
3044 int64_t len, total_sectors, max_nb_sectors;
3046 len = bdrv_getlength(bs);
3047 if (len < 0) {
3048 ret = len;
3049 goto out;
3052 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
3053 max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
3054 align >> BDRV_SECTOR_BITS);
3055 if (max_nb_sectors > 0) {
3056 ret = drv->bdrv_co_readv(bs, sector_num,
3057 MIN(nb_sectors, max_nb_sectors), qiov);
3058 } else {
3059 ret = 0;
3062 /* Reading beyond end of file is supposed to produce zeroes */
3063 if (ret == 0 && total_sectors < sector_num + nb_sectors) {
3064 uint64_t offset = MAX(0, total_sectors - sector_num);
3065 uint64_t bytes = (sector_num + nb_sectors - offset) *
3066 BDRV_SECTOR_SIZE;
3067 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
3071 out:
3072 return ret;
3076 * Handle a read request in coroutine context
3078 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
3079 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3080 BdrvRequestFlags flags)
3082 BlockDriver *drv = bs->drv;
3083 BdrvTrackedRequest req;
3085 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3086 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3087 uint8_t *head_buf = NULL;
3088 uint8_t *tail_buf = NULL;
3089 QEMUIOVector local_qiov;
3090 bool use_local_qiov = false;
3091 int ret;
3093 if (!drv) {
3094 return -ENOMEDIUM;
3096 if (bdrv_check_byte_request(bs, offset, bytes)) {
3097 return -EIO;
3100 if (bs->copy_on_read) {
3101 flags |= BDRV_REQ_COPY_ON_READ;
3104 /* throttling disk I/O */
3105 if (bs->io_limits_enabled) {
3106 bdrv_io_limits_intercept(bs, bytes, false);
3109 /* Align read if necessary by padding qiov */
3110 if (offset & (align - 1)) {
3111 head_buf = qemu_blockalign(bs, align);
3112 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3113 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3114 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3115 use_local_qiov = true;
3117 bytes += offset & (align - 1);
3118 offset = offset & ~(align - 1);
3121 if ((offset + bytes) & (align - 1)) {
3122 if (!use_local_qiov) {
3123 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3124 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3125 use_local_qiov = true;
3127 tail_buf = qemu_blockalign(bs, align);
3128 qemu_iovec_add(&local_qiov, tail_buf,
3129 align - ((offset + bytes) & (align - 1)));
3131 bytes = ROUND_UP(bytes, align);
3134 tracked_request_begin(&req, bs, offset, bytes, false);
3135 ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3136 use_local_qiov ? &local_qiov : qiov,
3137 flags);
3138 tracked_request_end(&req);
3140 if (use_local_qiov) {
3141 qemu_iovec_destroy(&local_qiov);
3142 qemu_vfree(head_buf);
3143 qemu_vfree(tail_buf);
3146 return ret;
3149 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3150 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3151 BdrvRequestFlags flags)
3153 if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3154 return -EINVAL;
3157 return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3158 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3161 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3162 int nb_sectors, QEMUIOVector *qiov)
3164 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3166 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3169 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3170 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3172 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3174 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3175 BDRV_REQ_COPY_ON_READ);
3178 /* if no limit is specified in the BlockLimits use a default
3179 * of 32768 512-byte sectors (16 MiB) per request.
3181 #define MAX_WRITE_ZEROES_DEFAULT 32768
3183 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3184 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3186 BlockDriver *drv = bs->drv;
3187 QEMUIOVector qiov;
3188 struct iovec iov = {0};
3189 int ret = 0;
3191 int max_write_zeroes = bs->bl.max_write_zeroes ?
3192 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3194 while (nb_sectors > 0 && !ret) {
3195 int num = nb_sectors;
3197 /* Align request. Block drivers can expect the "bulk" of the request
3198 * to be aligned.
3200 if (bs->bl.write_zeroes_alignment
3201 && num > bs->bl.write_zeroes_alignment) {
3202 if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3203 /* Make a small request up to the first aligned sector. */
3204 num = bs->bl.write_zeroes_alignment;
3205 num -= sector_num % bs->bl.write_zeroes_alignment;
3206 } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3207 /* Shorten the request to the last aligned sector. num cannot
3208 * underflow because num > bs->bl.write_zeroes_alignment.
3210 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3214 /* limit request size */
3215 if (num > max_write_zeroes) {
3216 num = max_write_zeroes;
3219 ret = -ENOTSUP;
3220 /* First try the efficient write zeroes operation */
3221 if (drv->bdrv_co_write_zeroes) {
3222 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3225 if (ret == -ENOTSUP) {
3226 /* Fall back to bounce buffer if write zeroes is unsupported */
3227 iov.iov_len = num * BDRV_SECTOR_SIZE;
3228 if (iov.iov_base == NULL) {
3229 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3230 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3232 qemu_iovec_init_external(&qiov, &iov, 1);
3234 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3236 /* Keep bounce buffer around if it is big enough for all
3237 * all future requests.
3239 if (num < max_write_zeroes) {
3240 qemu_vfree(iov.iov_base);
3241 iov.iov_base = NULL;
3245 sector_num += num;
3246 nb_sectors -= num;
3249 qemu_vfree(iov.iov_base);
3250 return ret;
3254 * Forwards an already correctly aligned write request to the BlockDriver.
3256 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3257 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3258 QEMUIOVector *qiov, int flags)
3260 BlockDriver *drv = bs->drv;
3261 bool waited;
3262 int ret;
3264 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3265 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3267 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3268 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3270 waited = wait_serialising_requests(req);
3271 assert(!waited || !req->serialising);
3272 assert(req->overlap_offset <= offset);
3273 assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
3275 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3277 if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF &&
3278 !(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_write_zeroes &&
3279 qemu_iovec_is_zero(qiov)) {
3280 flags |= BDRV_REQ_ZERO_WRITE;
3281 if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) {
3282 flags |= BDRV_REQ_MAY_UNMAP;
3286 if (ret < 0) {
3287 /* Do nothing, write notifier decided to fail this request */
3288 } else if (flags & BDRV_REQ_ZERO_WRITE) {
3289 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
3290 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3291 } else {
3292 BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
3293 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3295 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
3297 if (ret == 0 && !bs->enable_write_cache) {
3298 ret = bdrv_co_flush(bs);
3301 bdrv_set_dirty(bs, sector_num, nb_sectors);
3303 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3304 bs->wr_highest_sector = sector_num + nb_sectors - 1;
3306 if (bs->growable && ret >= 0) {
3307 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3310 return ret;
3314 * Handle a write request in coroutine context
3316 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3317 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3318 BdrvRequestFlags flags)
3320 BdrvTrackedRequest req;
3321 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3322 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3323 uint8_t *head_buf = NULL;
3324 uint8_t *tail_buf = NULL;
3325 QEMUIOVector local_qiov;
3326 bool use_local_qiov = false;
3327 int ret;
3329 if (!bs->drv) {
3330 return -ENOMEDIUM;
3332 if (bs->read_only) {
3333 return -EACCES;
3335 if (bdrv_check_byte_request(bs, offset, bytes)) {
3336 return -EIO;
3339 /* throttling disk I/O */
3340 if (bs->io_limits_enabled) {
3341 bdrv_io_limits_intercept(bs, bytes, true);
3345 * Align write if necessary by performing a read-modify-write cycle.
3346 * Pad qiov with the read parts and be sure to have a tracked request not
3347 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3349 tracked_request_begin(&req, bs, offset, bytes, true);
3351 if (offset & (align - 1)) {
3352 QEMUIOVector head_qiov;
3353 struct iovec head_iov;
3355 mark_request_serialising(&req, align);
3356 wait_serialising_requests(&req);
3358 head_buf = qemu_blockalign(bs, align);
3359 head_iov = (struct iovec) {
3360 .iov_base = head_buf,
3361 .iov_len = align,
3363 qemu_iovec_init_external(&head_qiov, &head_iov, 1);
3365 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
3366 ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
3367 align, &head_qiov, 0);
3368 if (ret < 0) {
3369 goto fail;
3371 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
3373 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3374 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3375 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3376 use_local_qiov = true;
3378 bytes += offset & (align - 1);
3379 offset = offset & ~(align - 1);
3382 if ((offset + bytes) & (align - 1)) {
3383 QEMUIOVector tail_qiov;
3384 struct iovec tail_iov;
3385 size_t tail_bytes;
3386 bool waited;
3388 mark_request_serialising(&req, align);
3389 waited = wait_serialising_requests(&req);
3390 assert(!waited || !use_local_qiov);
3392 tail_buf = qemu_blockalign(bs, align);
3393 tail_iov = (struct iovec) {
3394 .iov_base = tail_buf,
3395 .iov_len = align,
3397 qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
3399 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
3400 ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
3401 align, &tail_qiov, 0);
3402 if (ret < 0) {
3403 goto fail;
3405 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
3407 if (!use_local_qiov) {
3408 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3409 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3410 use_local_qiov = true;
3413 tail_bytes = (offset + bytes) & (align - 1);
3414 qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
3416 bytes = ROUND_UP(bytes, align);
3419 ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
3420 use_local_qiov ? &local_qiov : qiov,
3421 flags);
3423 fail:
3424 tracked_request_end(&req);
3426 if (use_local_qiov) {
3427 qemu_iovec_destroy(&local_qiov);
3429 qemu_vfree(head_buf);
3430 qemu_vfree(tail_buf);
3432 return ret;
3435 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3436 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3437 BdrvRequestFlags flags)
3439 if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3440 return -EINVAL;
3443 return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3444 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3447 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3448 int nb_sectors, QEMUIOVector *qiov)
3450 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3452 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3455 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3456 int64_t sector_num, int nb_sectors,
3457 BdrvRequestFlags flags)
3459 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3461 if (!(bs->open_flags & BDRV_O_UNMAP)) {
3462 flags &= ~BDRV_REQ_MAY_UNMAP;
3465 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3466 BDRV_REQ_ZERO_WRITE | flags);
3470 * Truncate file to 'offset' bytes (needed only for file protocols)
3472 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3474 BlockDriver *drv = bs->drv;
3475 int ret;
3476 if (!drv)
3477 return -ENOMEDIUM;
3478 if (!drv->bdrv_truncate)
3479 return -ENOTSUP;
3480 if (bs->read_only)
3481 return -EACCES;
3483 ret = drv->bdrv_truncate(bs, offset);
3484 if (ret == 0) {
3485 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3486 bdrv_dev_resize_cb(bs);
3488 return ret;
3492 * Length of a allocated file in bytes. Sparse files are counted by actual
3493 * allocated space. Return < 0 if error or unknown.
3495 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3497 BlockDriver *drv = bs->drv;
3498 if (!drv) {
3499 return -ENOMEDIUM;
3501 if (drv->bdrv_get_allocated_file_size) {
3502 return drv->bdrv_get_allocated_file_size(bs);
3504 if (bs->file) {
3505 return bdrv_get_allocated_file_size(bs->file);
3507 return -ENOTSUP;
3511 * Length of a file in bytes. Return < 0 if error or unknown.
3513 int64_t bdrv_getlength(BlockDriverState *bs)
3515 BlockDriver *drv = bs->drv;
3516 if (!drv)
3517 return -ENOMEDIUM;
3519 if (drv->has_variable_length) {
3520 int ret = refresh_total_sectors(bs, bs->total_sectors);
3521 if (ret < 0) {
3522 return ret;
3525 return bs->total_sectors * BDRV_SECTOR_SIZE;
3528 /* return 0 as number of sectors if no device present or error */
3529 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3531 int64_t length;
3532 length = bdrv_getlength(bs);
3533 if (length < 0)
3534 length = 0;
3535 else
3536 length = length >> BDRV_SECTOR_BITS;
3537 *nb_sectors_ptr = length;
3540 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3541 BlockdevOnError on_write_error)
3543 bs->on_read_error = on_read_error;
3544 bs->on_write_error = on_write_error;
3547 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3549 return is_read ? bs->on_read_error : bs->on_write_error;
3552 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3554 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3556 switch (on_err) {
3557 case BLOCKDEV_ON_ERROR_ENOSPC:
3558 return (error == ENOSPC) ?
3559 BLOCK_ERROR_ACTION_STOP : BLOCK_ERROR_ACTION_REPORT;
3560 case BLOCKDEV_ON_ERROR_STOP:
3561 return BLOCK_ERROR_ACTION_STOP;
3562 case BLOCKDEV_ON_ERROR_REPORT:
3563 return BLOCK_ERROR_ACTION_REPORT;
3564 case BLOCKDEV_ON_ERROR_IGNORE:
3565 return BLOCK_ERROR_ACTION_IGNORE;
3566 default:
3567 abort();
3571 /* This is done by device models because, while the block layer knows
3572 * about the error, it does not know whether an operation comes from
3573 * the device or the block layer (from a job, for example).
3575 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3576 bool is_read, int error)
3578 assert(error >= 0);
3580 if (action == BLOCK_ERROR_ACTION_STOP) {
3581 /* First set the iostatus, so that "info block" returns an iostatus
3582 * that matches the events raised so far (an additional error iostatus
3583 * is fine, but not a lost one).
3585 bdrv_iostatus_set_err(bs, error);
3587 /* Then raise the request to stop the VM and the event.
3588 * qemu_system_vmstop_request_prepare has two effects. First,
3589 * it ensures that the STOP event always comes after the
3590 * BLOCK_IO_ERROR event. Second, it ensures that even if management
3591 * can observe the STOP event and do a "cont" before the STOP
3592 * event is issued, the VM will not stop. In this case, vm_start()
3593 * also ensures that the STOP/RESUME pair of events is emitted.
3595 qemu_system_vmstop_request_prepare();
3596 qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3597 is_read ? IO_OPERATION_TYPE_READ :
3598 IO_OPERATION_TYPE_WRITE,
3599 action, &error_abort);
3600 qemu_system_vmstop_request(RUN_STATE_IO_ERROR);
3601 } else {
3602 qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3603 is_read ? IO_OPERATION_TYPE_READ :
3604 IO_OPERATION_TYPE_WRITE,
3605 action, &error_abort);
3609 int bdrv_is_read_only(BlockDriverState *bs)
3611 return bs->read_only;
3614 int bdrv_is_sg(BlockDriverState *bs)
3616 return bs->sg;
3619 int bdrv_enable_write_cache(BlockDriverState *bs)
3621 return bs->enable_write_cache;
3624 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3626 bs->enable_write_cache = wce;
3628 /* so a reopen() will preserve wce */
3629 if (wce) {
3630 bs->open_flags |= BDRV_O_CACHE_WB;
3631 } else {
3632 bs->open_flags &= ~BDRV_O_CACHE_WB;
3636 int bdrv_is_encrypted(BlockDriverState *bs)
3638 if (bs->backing_hd && bs->backing_hd->encrypted)
3639 return 1;
3640 return bs->encrypted;
3643 int bdrv_key_required(BlockDriverState *bs)
3645 BlockDriverState *backing_hd = bs->backing_hd;
3647 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3648 return 1;
3649 return (bs->encrypted && !bs->valid_key);
3652 int bdrv_set_key(BlockDriverState *bs, const char *key)
3654 int ret;
3655 if (bs->backing_hd && bs->backing_hd->encrypted) {
3656 ret = bdrv_set_key(bs->backing_hd, key);
3657 if (ret < 0)
3658 return ret;
3659 if (!bs->encrypted)
3660 return 0;
3662 if (!bs->encrypted) {
3663 return -EINVAL;
3664 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3665 return -ENOMEDIUM;
3667 ret = bs->drv->bdrv_set_key(bs, key);
3668 if (ret < 0) {
3669 bs->valid_key = 0;
3670 } else if (!bs->valid_key) {
3671 bs->valid_key = 1;
3672 /* call the change callback now, we skipped it on open */
3673 bdrv_dev_change_media_cb(bs, true);
3675 return ret;
3678 const char *bdrv_get_format_name(BlockDriverState *bs)
3680 return bs->drv ? bs->drv->format_name : NULL;
3683 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3684 void *opaque)
3686 BlockDriver *drv;
3687 int count = 0;
3688 const char **formats = NULL;
3690 QLIST_FOREACH(drv, &bdrv_drivers, list) {
3691 if (drv->format_name) {
3692 bool found = false;
3693 int i = count;
3694 while (formats && i && !found) {
3695 found = !strcmp(formats[--i], drv->format_name);
3698 if (!found) {
3699 formats = g_realloc(formats, (count + 1) * sizeof(char *));
3700 formats[count++] = drv->format_name;
3701 it(opaque, drv->format_name);
3705 g_free(formats);
3708 /* This function is to find block backend bs */
3709 BlockDriverState *bdrv_find(const char *name)
3711 BlockDriverState *bs;
3713 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3714 if (!strcmp(name, bs->device_name)) {
3715 return bs;
3718 return NULL;
3721 /* This function is to find a node in the bs graph */
3722 BlockDriverState *bdrv_find_node(const char *node_name)
3724 BlockDriverState *bs;
3726 assert(node_name);
3728 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3729 if (!strcmp(node_name, bs->node_name)) {
3730 return bs;
3733 return NULL;
3736 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3737 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3739 BlockDeviceInfoList *list, *entry;
3740 BlockDriverState *bs;
3742 list = NULL;
3743 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3744 entry = g_malloc0(sizeof(*entry));
3745 entry->value = bdrv_block_device_info(bs);
3746 entry->next = list;
3747 list = entry;
3750 return list;
3753 BlockDriverState *bdrv_lookup_bs(const char *device,
3754 const char *node_name,
3755 Error **errp)
3757 BlockDriverState *bs = NULL;
3759 if (device) {
3760 bs = bdrv_find(device);
3762 if (bs) {
3763 return bs;
3767 if (node_name) {
3768 bs = bdrv_find_node(node_name);
3770 if (bs) {
3771 return bs;
3775 error_setg(errp, "Cannot find device=%s nor node_name=%s",
3776 device ? device : "",
3777 node_name ? node_name : "");
3778 return NULL;
3781 /* If 'base' is in the same chain as 'top', return true. Otherwise,
3782 * return false. If either argument is NULL, return false. */
3783 bool bdrv_chain_contains(BlockDriverState *top, BlockDriverState *base)
3785 while (top && top != base) {
3786 top = top->backing_hd;
3789 return top != NULL;
3792 BlockDriverState *bdrv_next(BlockDriverState *bs)
3794 if (!bs) {
3795 return QTAILQ_FIRST(&bdrv_states);
3797 return QTAILQ_NEXT(bs, device_list);
3800 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3802 BlockDriverState *bs;
3804 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3805 it(opaque, bs);
3809 const char *bdrv_get_device_name(BlockDriverState *bs)
3811 return bs->device_name;
3814 int bdrv_get_flags(BlockDriverState *bs)
3816 return bs->open_flags;
3819 int bdrv_flush_all(void)
3821 BlockDriverState *bs;
3822 int result = 0;
3824 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3825 AioContext *aio_context = bdrv_get_aio_context(bs);
3826 int ret;
3828 aio_context_acquire(aio_context);
3829 ret = bdrv_flush(bs);
3830 if (ret < 0 && !result) {
3831 result = ret;
3833 aio_context_release(aio_context);
3836 return result;
3839 int bdrv_has_zero_init_1(BlockDriverState *bs)
3841 return 1;
3844 int bdrv_has_zero_init(BlockDriverState *bs)
3846 assert(bs->drv);
3848 /* If BS is a copy on write image, it is initialized to
3849 the contents of the base image, which may not be zeroes. */
3850 if (bs->backing_hd) {
3851 return 0;
3853 if (bs->drv->bdrv_has_zero_init) {
3854 return bs->drv->bdrv_has_zero_init(bs);
3857 /* safe default */
3858 return 0;
3861 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3863 BlockDriverInfo bdi;
3865 if (bs->backing_hd) {
3866 return false;
3869 if (bdrv_get_info(bs, &bdi) == 0) {
3870 return bdi.unallocated_blocks_are_zero;
3873 return false;
3876 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3878 BlockDriverInfo bdi;
3880 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3881 return false;
3884 if (bdrv_get_info(bs, &bdi) == 0) {
3885 return bdi.can_write_zeroes_with_unmap;
3888 return false;
3891 typedef struct BdrvCoGetBlockStatusData {
3892 BlockDriverState *bs;
3893 BlockDriverState *base;
3894 int64_t sector_num;
3895 int nb_sectors;
3896 int *pnum;
3897 int64_t ret;
3898 bool done;
3899 } BdrvCoGetBlockStatusData;
3902 * Returns true iff the specified sector is present in the disk image. Drivers
3903 * not implementing the functionality are assumed to not support backing files,
3904 * hence all their sectors are reported as allocated.
3906 * If 'sector_num' is beyond the end of the disk image the return value is 0
3907 * and 'pnum' is set to 0.
3909 * 'pnum' is set to the number of sectors (including and immediately following
3910 * the specified sector) that are known to be in the same
3911 * allocated/unallocated state.
3913 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3914 * beyond the end of the disk image it will be clamped.
3916 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3917 int64_t sector_num,
3918 int nb_sectors, int *pnum)
3920 int64_t length;
3921 int64_t n;
3922 int64_t ret, ret2;
3924 length = bdrv_getlength(bs);
3925 if (length < 0) {
3926 return length;
3929 if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3930 *pnum = 0;
3931 return 0;
3934 n = bs->total_sectors - sector_num;
3935 if (n < nb_sectors) {
3936 nb_sectors = n;
3939 if (!bs->drv->bdrv_co_get_block_status) {
3940 *pnum = nb_sectors;
3941 ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED;
3942 if (bs->drv->protocol_name) {
3943 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3945 return ret;
3948 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3949 if (ret < 0) {
3950 *pnum = 0;
3951 return ret;
3954 if (ret & BDRV_BLOCK_RAW) {
3955 assert(ret & BDRV_BLOCK_OFFSET_VALID);
3956 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3957 *pnum, pnum);
3960 if (ret & (BDRV_BLOCK_DATA | BDRV_BLOCK_ZERO)) {
3961 ret |= BDRV_BLOCK_ALLOCATED;
3964 if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3965 if (bdrv_unallocated_blocks_are_zero(bs)) {
3966 ret |= BDRV_BLOCK_ZERO;
3967 } else if (bs->backing_hd) {
3968 BlockDriverState *bs2 = bs->backing_hd;
3969 int64_t length2 = bdrv_getlength(bs2);
3970 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3971 ret |= BDRV_BLOCK_ZERO;
3976 if (bs->file &&
3977 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
3978 (ret & BDRV_BLOCK_OFFSET_VALID)) {
3979 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3980 *pnum, pnum);
3981 if (ret2 >= 0) {
3982 /* Ignore errors. This is just providing extra information, it
3983 * is useful but not necessary.
3985 ret |= (ret2 & BDRV_BLOCK_ZERO);
3989 return ret;
3992 /* Coroutine wrapper for bdrv_get_block_status() */
3993 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
3995 BdrvCoGetBlockStatusData *data = opaque;
3996 BlockDriverState *bs = data->bs;
3998 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
3999 data->pnum);
4000 data->done = true;
4004 * Synchronous wrapper around bdrv_co_get_block_status().
4006 * See bdrv_co_get_block_status() for details.
4008 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
4009 int nb_sectors, int *pnum)
4011 Coroutine *co;
4012 BdrvCoGetBlockStatusData data = {
4013 .bs = bs,
4014 .sector_num = sector_num,
4015 .nb_sectors = nb_sectors,
4016 .pnum = pnum,
4017 .done = false,
4020 if (qemu_in_coroutine()) {
4021 /* Fast-path if already in coroutine context */
4022 bdrv_get_block_status_co_entry(&data);
4023 } else {
4024 AioContext *aio_context = bdrv_get_aio_context(bs);
4026 co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
4027 qemu_coroutine_enter(co, &data);
4028 while (!data.done) {
4029 aio_poll(aio_context, true);
4032 return data.ret;
4035 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
4036 int nb_sectors, int *pnum)
4038 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
4039 if (ret < 0) {
4040 return ret;
4042 return (ret & BDRV_BLOCK_ALLOCATED);
4046 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
4048 * Return true if the given sector is allocated in any image between
4049 * BASE and TOP (inclusive). BASE can be NULL to check if the given
4050 * sector is allocated in any image of the chain. Return false otherwise.
4052 * 'pnum' is set to the number of sectors (including and immediately following
4053 * the specified sector) that are known to be in the same
4054 * allocated/unallocated state.
4057 int bdrv_is_allocated_above(BlockDriverState *top,
4058 BlockDriverState *base,
4059 int64_t sector_num,
4060 int nb_sectors, int *pnum)
4062 BlockDriverState *intermediate;
4063 int ret, n = nb_sectors;
4065 intermediate = top;
4066 while (intermediate && intermediate != base) {
4067 int pnum_inter;
4068 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
4069 &pnum_inter);
4070 if (ret < 0) {
4071 return ret;
4072 } else if (ret) {
4073 *pnum = pnum_inter;
4074 return 1;
4078 * [sector_num, nb_sectors] is unallocated on top but intermediate
4079 * might have
4081 * [sector_num+x, nr_sectors] allocated.
4083 if (n > pnum_inter &&
4084 (intermediate == top ||
4085 sector_num + pnum_inter < intermediate->total_sectors)) {
4086 n = pnum_inter;
4089 intermediate = intermediate->backing_hd;
4092 *pnum = n;
4093 return 0;
4096 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
4098 if (bs->backing_hd && bs->backing_hd->encrypted)
4099 return bs->backing_file;
4100 else if (bs->encrypted)
4101 return bs->filename;
4102 else
4103 return NULL;
4106 void bdrv_get_backing_filename(BlockDriverState *bs,
4107 char *filename, int filename_size)
4109 pstrcpy(filename, filename_size, bs->backing_file);
4112 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
4113 const uint8_t *buf, int nb_sectors)
4115 BlockDriver *drv = bs->drv;
4116 if (!drv)
4117 return -ENOMEDIUM;
4118 if (!drv->bdrv_write_compressed)
4119 return -ENOTSUP;
4120 if (bdrv_check_request(bs, sector_num, nb_sectors))
4121 return -EIO;
4123 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
4125 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
4128 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
4130 BlockDriver *drv = bs->drv;
4131 if (!drv)
4132 return -ENOMEDIUM;
4133 if (!drv->bdrv_get_info)
4134 return -ENOTSUP;
4135 memset(bdi, 0, sizeof(*bdi));
4136 return drv->bdrv_get_info(bs, bdi);
4139 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
4141 BlockDriver *drv = bs->drv;
4142 if (drv && drv->bdrv_get_specific_info) {
4143 return drv->bdrv_get_specific_info(bs);
4145 return NULL;
4148 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
4149 int64_t pos, int size)
4151 QEMUIOVector qiov;
4152 struct iovec iov = {
4153 .iov_base = (void *) buf,
4154 .iov_len = size,
4157 qemu_iovec_init_external(&qiov, &iov, 1);
4158 return bdrv_writev_vmstate(bs, &qiov, pos);
4161 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
4163 BlockDriver *drv = bs->drv;
4165 if (!drv) {
4166 return -ENOMEDIUM;
4167 } else if (drv->bdrv_save_vmstate) {
4168 return drv->bdrv_save_vmstate(bs, qiov, pos);
4169 } else if (bs->file) {
4170 return bdrv_writev_vmstate(bs->file, qiov, pos);
4173 return -ENOTSUP;
4176 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
4177 int64_t pos, int size)
4179 BlockDriver *drv = bs->drv;
4180 if (!drv)
4181 return -ENOMEDIUM;
4182 if (drv->bdrv_load_vmstate)
4183 return drv->bdrv_load_vmstate(bs, buf, pos, size);
4184 if (bs->file)
4185 return bdrv_load_vmstate(bs->file, buf, pos, size);
4186 return -ENOTSUP;
4189 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
4191 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
4192 return;
4195 bs->drv->bdrv_debug_event(bs, event);
4198 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
4199 const char *tag)
4201 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
4202 bs = bs->file;
4205 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
4206 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
4209 return -ENOTSUP;
4212 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
4214 while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
4215 bs = bs->file;
4218 if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
4219 return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
4222 return -ENOTSUP;
4225 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4227 while (bs && (!bs->drv || !bs->drv->bdrv_debug_resume)) {
4228 bs = bs->file;
4231 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4232 return bs->drv->bdrv_debug_resume(bs, tag);
4235 return -ENOTSUP;
4238 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4240 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4241 bs = bs->file;
4244 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4245 return bs->drv->bdrv_debug_is_suspended(bs, tag);
4248 return false;
4251 int bdrv_is_snapshot(BlockDriverState *bs)
4253 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4256 /* backing_file can either be relative, or absolute, or a protocol. If it is
4257 * relative, it must be relative to the chain. So, passing in bs->filename
4258 * from a BDS as backing_file should not be done, as that may be relative to
4259 * the CWD rather than the chain. */
4260 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4261 const char *backing_file)
4263 char *filename_full = NULL;
4264 char *backing_file_full = NULL;
4265 char *filename_tmp = NULL;
4266 int is_protocol = 0;
4267 BlockDriverState *curr_bs = NULL;
4268 BlockDriverState *retval = NULL;
4270 if (!bs || !bs->drv || !backing_file) {
4271 return NULL;
4274 filename_full = g_malloc(PATH_MAX);
4275 backing_file_full = g_malloc(PATH_MAX);
4276 filename_tmp = g_malloc(PATH_MAX);
4278 is_protocol = path_has_protocol(backing_file);
4280 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4282 /* If either of the filename paths is actually a protocol, then
4283 * compare unmodified paths; otherwise make paths relative */
4284 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4285 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4286 retval = curr_bs->backing_hd;
4287 break;
4289 } else {
4290 /* If not an absolute filename path, make it relative to the current
4291 * image's filename path */
4292 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4293 backing_file);
4295 /* We are going to compare absolute pathnames */
4296 if (!realpath(filename_tmp, filename_full)) {
4297 continue;
4300 /* We need to make sure the backing filename we are comparing against
4301 * is relative to the current image filename (or absolute) */
4302 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4303 curr_bs->backing_file);
4305 if (!realpath(filename_tmp, backing_file_full)) {
4306 continue;
4309 if (strcmp(backing_file_full, filename_full) == 0) {
4310 retval = curr_bs->backing_hd;
4311 break;
4316 g_free(filename_full);
4317 g_free(backing_file_full);
4318 g_free(filename_tmp);
4319 return retval;
4322 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4324 if (!bs->drv) {
4325 return 0;
4328 if (!bs->backing_hd) {
4329 return 0;
4332 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4335 /**************************************************************/
4336 /* async I/Os */
4338 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4339 QEMUIOVector *qiov, int nb_sectors,
4340 BlockDriverCompletionFunc *cb, void *opaque)
4342 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4344 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4345 cb, opaque, false);
4348 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4349 QEMUIOVector *qiov, int nb_sectors,
4350 BlockDriverCompletionFunc *cb, void *opaque)
4352 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4354 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4355 cb, opaque, true);
4358 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4359 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4360 BlockDriverCompletionFunc *cb, void *opaque)
4362 trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4364 return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4365 BDRV_REQ_ZERO_WRITE | flags,
4366 cb, opaque, true);
4370 typedef struct MultiwriteCB {
4371 int error;
4372 int num_requests;
4373 int num_callbacks;
4374 struct {
4375 BlockDriverCompletionFunc *cb;
4376 void *opaque;
4377 QEMUIOVector *free_qiov;
4378 } callbacks[];
4379 } MultiwriteCB;
4381 static void multiwrite_user_cb(MultiwriteCB *mcb)
4383 int i;
4385 for (i = 0; i < mcb->num_callbacks; i++) {
4386 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4387 if (mcb->callbacks[i].free_qiov) {
4388 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4390 g_free(mcb->callbacks[i].free_qiov);
4394 static void multiwrite_cb(void *opaque, int ret)
4396 MultiwriteCB *mcb = opaque;
4398 trace_multiwrite_cb(mcb, ret);
4400 if (ret < 0 && !mcb->error) {
4401 mcb->error = ret;
4404 mcb->num_requests--;
4405 if (mcb->num_requests == 0) {
4406 multiwrite_user_cb(mcb);
4407 g_free(mcb);
4411 static int multiwrite_req_compare(const void *a, const void *b)
4413 const BlockRequest *req1 = a, *req2 = b;
4416 * Note that we can't simply subtract req2->sector from req1->sector
4417 * here as that could overflow the return value.
4419 if (req1->sector > req2->sector) {
4420 return 1;
4421 } else if (req1->sector < req2->sector) {
4422 return -1;
4423 } else {
4424 return 0;
4429 * Takes a bunch of requests and tries to merge them. Returns the number of
4430 * requests that remain after merging.
4432 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4433 int num_reqs, MultiwriteCB *mcb)
4435 int i, outidx;
4437 // Sort requests by start sector
4438 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4440 // Check if adjacent requests touch the same clusters. If so, combine them,
4441 // filling up gaps with zero sectors.
4442 outidx = 0;
4443 for (i = 1; i < num_reqs; i++) {
4444 int merge = 0;
4445 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4447 // Handle exactly sequential writes and overlapping writes.
4448 if (reqs[i].sector <= oldreq_last) {
4449 merge = 1;
4452 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4453 merge = 0;
4456 if (merge) {
4457 size_t size;
4458 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4459 qemu_iovec_init(qiov,
4460 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4462 // Add the first request to the merged one. If the requests are
4463 // overlapping, drop the last sectors of the first request.
4464 size = (reqs[i].sector - reqs[outidx].sector) << 9;
4465 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4467 // We should need to add any zeros between the two requests
4468 assert (reqs[i].sector <= oldreq_last);
4470 // Add the second request
4471 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4473 reqs[outidx].nb_sectors = qiov->size >> 9;
4474 reqs[outidx].qiov = qiov;
4476 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4477 } else {
4478 outidx++;
4479 reqs[outidx].sector = reqs[i].sector;
4480 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4481 reqs[outidx].qiov = reqs[i].qiov;
4485 return outidx + 1;
4489 * Submit multiple AIO write requests at once.
4491 * On success, the function returns 0 and all requests in the reqs array have
4492 * been submitted. In error case this function returns -1, and any of the
4493 * requests may or may not be submitted yet. In particular, this means that the
4494 * callback will be called for some of the requests, for others it won't. The
4495 * caller must check the error field of the BlockRequest to wait for the right
4496 * callbacks (if error != 0, no callback will be called).
4498 * The implementation may modify the contents of the reqs array, e.g. to merge
4499 * requests. However, the fields opaque and error are left unmodified as they
4500 * are used to signal failure for a single request to the caller.
4502 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4504 MultiwriteCB *mcb;
4505 int i;
4507 /* don't submit writes if we don't have a medium */
4508 if (bs->drv == NULL) {
4509 for (i = 0; i < num_reqs; i++) {
4510 reqs[i].error = -ENOMEDIUM;
4512 return -1;
4515 if (num_reqs == 0) {
4516 return 0;
4519 // Create MultiwriteCB structure
4520 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4521 mcb->num_requests = 0;
4522 mcb->num_callbacks = num_reqs;
4524 for (i = 0; i < num_reqs; i++) {
4525 mcb->callbacks[i].cb = reqs[i].cb;
4526 mcb->callbacks[i].opaque = reqs[i].opaque;
4529 // Check for mergable requests
4530 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4532 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4534 /* Run the aio requests. */
4535 mcb->num_requests = num_reqs;
4536 for (i = 0; i < num_reqs; i++) {
4537 bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4538 reqs[i].nb_sectors, reqs[i].flags,
4539 multiwrite_cb, mcb,
4540 true);
4543 return 0;
4546 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4548 acb->aiocb_info->cancel(acb);
4551 /**************************************************************/
4552 /* async block device emulation */
4554 typedef struct BlockDriverAIOCBSync {
4555 BlockDriverAIOCB common;
4556 QEMUBH *bh;
4557 int ret;
4558 /* vector translation state */
4559 QEMUIOVector *qiov;
4560 uint8_t *bounce;
4561 int is_write;
4562 } BlockDriverAIOCBSync;
4564 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4566 BlockDriverAIOCBSync *acb =
4567 container_of(blockacb, BlockDriverAIOCBSync, common);
4568 qemu_bh_delete(acb->bh);
4569 acb->bh = NULL;
4570 qemu_aio_release(acb);
4573 static const AIOCBInfo bdrv_em_aiocb_info = {
4574 .aiocb_size = sizeof(BlockDriverAIOCBSync),
4575 .cancel = bdrv_aio_cancel_em,
4578 static void bdrv_aio_bh_cb(void *opaque)
4580 BlockDriverAIOCBSync *acb = opaque;
4582 if (!acb->is_write)
4583 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4584 qemu_vfree(acb->bounce);
4585 acb->common.cb(acb->common.opaque, acb->ret);
4586 qemu_bh_delete(acb->bh);
4587 acb->bh = NULL;
4588 qemu_aio_release(acb);
4591 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4592 int64_t sector_num,
4593 QEMUIOVector *qiov,
4594 int nb_sectors,
4595 BlockDriverCompletionFunc *cb,
4596 void *opaque,
4597 int is_write)
4600 BlockDriverAIOCBSync *acb;
4602 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4603 acb->is_write = is_write;
4604 acb->qiov = qiov;
4605 acb->bounce = qemu_blockalign(bs, qiov->size);
4606 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_aio_bh_cb, acb);
4608 if (is_write) {
4609 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4610 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4611 } else {
4612 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4615 qemu_bh_schedule(acb->bh);
4617 return &acb->common;
4620 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4621 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4622 BlockDriverCompletionFunc *cb, void *opaque)
4624 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4627 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4628 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4629 BlockDriverCompletionFunc *cb, void *opaque)
4631 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4635 typedef struct BlockDriverAIOCBCoroutine {
4636 BlockDriverAIOCB common;
4637 BlockRequest req;
4638 bool is_write;
4639 bool *done;
4640 QEMUBH* bh;
4641 } BlockDriverAIOCBCoroutine;
4643 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4645 AioContext *aio_context = bdrv_get_aio_context(blockacb->bs);
4646 BlockDriverAIOCBCoroutine *acb =
4647 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4648 bool done = false;
4650 acb->done = &done;
4651 while (!done) {
4652 aio_poll(aio_context, true);
4656 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4657 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
4658 .cancel = bdrv_aio_co_cancel_em,
4661 static void bdrv_co_em_bh(void *opaque)
4663 BlockDriverAIOCBCoroutine *acb = opaque;
4665 acb->common.cb(acb->common.opaque, acb->req.error);
4667 if (acb->done) {
4668 *acb->done = true;
4671 qemu_bh_delete(acb->bh);
4672 qemu_aio_release(acb);
4675 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4676 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4678 BlockDriverAIOCBCoroutine *acb = opaque;
4679 BlockDriverState *bs = acb->common.bs;
4681 if (!acb->is_write) {
4682 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4683 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4684 } else {
4685 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4686 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4689 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4690 qemu_bh_schedule(acb->bh);
4693 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4694 int64_t sector_num,
4695 QEMUIOVector *qiov,
4696 int nb_sectors,
4697 BdrvRequestFlags flags,
4698 BlockDriverCompletionFunc *cb,
4699 void *opaque,
4700 bool is_write)
4702 Coroutine *co;
4703 BlockDriverAIOCBCoroutine *acb;
4705 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4706 acb->req.sector = sector_num;
4707 acb->req.nb_sectors = nb_sectors;
4708 acb->req.qiov = qiov;
4709 acb->req.flags = flags;
4710 acb->is_write = is_write;
4711 acb->done = NULL;
4713 co = qemu_coroutine_create(bdrv_co_do_rw);
4714 qemu_coroutine_enter(co, acb);
4716 return &acb->common;
4719 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4721 BlockDriverAIOCBCoroutine *acb = opaque;
4722 BlockDriverState *bs = acb->common.bs;
4724 acb->req.error = bdrv_co_flush(bs);
4725 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4726 qemu_bh_schedule(acb->bh);
4729 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4730 BlockDriverCompletionFunc *cb, void *opaque)
4732 trace_bdrv_aio_flush(bs, opaque);
4734 Coroutine *co;
4735 BlockDriverAIOCBCoroutine *acb;
4737 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4738 acb->done = NULL;
4740 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4741 qemu_coroutine_enter(co, acb);
4743 return &acb->common;
4746 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4748 BlockDriverAIOCBCoroutine *acb = opaque;
4749 BlockDriverState *bs = acb->common.bs;
4751 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4752 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4753 qemu_bh_schedule(acb->bh);
4756 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4757 int64_t sector_num, int nb_sectors,
4758 BlockDriverCompletionFunc *cb, void *opaque)
4760 Coroutine *co;
4761 BlockDriverAIOCBCoroutine *acb;
4763 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4765 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4766 acb->req.sector = sector_num;
4767 acb->req.nb_sectors = nb_sectors;
4768 acb->done = NULL;
4769 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4770 qemu_coroutine_enter(co, acb);
4772 return &acb->common;
4775 void bdrv_init(void)
4777 module_call_init(MODULE_INIT_BLOCK);
4780 void bdrv_init_with_whitelist(void)
4782 use_bdrv_whitelist = 1;
4783 bdrv_init();
4786 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4787 BlockDriverCompletionFunc *cb, void *opaque)
4789 BlockDriverAIOCB *acb;
4791 acb = g_slice_alloc(aiocb_info->aiocb_size);
4792 acb->aiocb_info = aiocb_info;
4793 acb->bs = bs;
4794 acb->cb = cb;
4795 acb->opaque = opaque;
4796 return acb;
4799 void qemu_aio_release(void *p)
4801 BlockDriverAIOCB *acb = p;
4802 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4805 /**************************************************************/
4806 /* Coroutine block device emulation */
4808 typedef struct CoroutineIOCompletion {
4809 Coroutine *coroutine;
4810 int ret;
4811 } CoroutineIOCompletion;
4813 static void bdrv_co_io_em_complete(void *opaque, int ret)
4815 CoroutineIOCompletion *co = opaque;
4817 co->ret = ret;
4818 qemu_coroutine_enter(co->coroutine, NULL);
4821 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4822 int nb_sectors, QEMUIOVector *iov,
4823 bool is_write)
4825 CoroutineIOCompletion co = {
4826 .coroutine = qemu_coroutine_self(),
4828 BlockDriverAIOCB *acb;
4830 if (is_write) {
4831 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4832 bdrv_co_io_em_complete, &co);
4833 } else {
4834 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4835 bdrv_co_io_em_complete, &co);
4838 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4839 if (!acb) {
4840 return -EIO;
4842 qemu_coroutine_yield();
4844 return co.ret;
4847 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4848 int64_t sector_num, int nb_sectors,
4849 QEMUIOVector *iov)
4851 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4854 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4855 int64_t sector_num, int nb_sectors,
4856 QEMUIOVector *iov)
4858 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4861 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4863 RwCo *rwco = opaque;
4865 rwco->ret = bdrv_co_flush(rwco->bs);
4868 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4870 int ret;
4872 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4873 return 0;
4876 /* Write back cached data to the OS even with cache=unsafe */
4877 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4878 if (bs->drv->bdrv_co_flush_to_os) {
4879 ret = bs->drv->bdrv_co_flush_to_os(bs);
4880 if (ret < 0) {
4881 return ret;
4885 /* But don't actually force it to the disk with cache=unsafe */
4886 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4887 goto flush_parent;
4890 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4891 if (bs->drv->bdrv_co_flush_to_disk) {
4892 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4893 } else if (bs->drv->bdrv_aio_flush) {
4894 BlockDriverAIOCB *acb;
4895 CoroutineIOCompletion co = {
4896 .coroutine = qemu_coroutine_self(),
4899 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4900 if (acb == NULL) {
4901 ret = -EIO;
4902 } else {
4903 qemu_coroutine_yield();
4904 ret = co.ret;
4906 } else {
4908 * Some block drivers always operate in either writethrough or unsafe
4909 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4910 * know how the server works (because the behaviour is hardcoded or
4911 * depends on server-side configuration), so we can't ensure that
4912 * everything is safe on disk. Returning an error doesn't work because
4913 * that would break guests even if the server operates in writethrough
4914 * mode.
4916 * Let's hope the user knows what he's doing.
4918 ret = 0;
4920 if (ret < 0) {
4921 return ret;
4924 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4925 * in the case of cache=unsafe, so there are no useless flushes.
4927 flush_parent:
4928 return bdrv_co_flush(bs->file);
4931 void bdrv_invalidate_cache(BlockDriverState *bs, Error **errp)
4933 Error *local_err = NULL;
4934 int ret;
4936 if (!bs->drv) {
4937 return;
4940 if (bs->drv->bdrv_invalidate_cache) {
4941 bs->drv->bdrv_invalidate_cache(bs, &local_err);
4942 } else if (bs->file) {
4943 bdrv_invalidate_cache(bs->file, &local_err);
4945 if (local_err) {
4946 error_propagate(errp, local_err);
4947 return;
4950 ret = refresh_total_sectors(bs, bs->total_sectors);
4951 if (ret < 0) {
4952 error_setg_errno(errp, -ret, "Could not refresh total sector count");
4953 return;
4957 void bdrv_invalidate_cache_all(Error **errp)
4959 BlockDriverState *bs;
4960 Error *local_err = NULL;
4962 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4963 AioContext *aio_context = bdrv_get_aio_context(bs);
4965 aio_context_acquire(aio_context);
4966 bdrv_invalidate_cache(bs, &local_err);
4967 aio_context_release(aio_context);
4968 if (local_err) {
4969 error_propagate(errp, local_err);
4970 return;
4975 void bdrv_clear_incoming_migration_all(void)
4977 BlockDriverState *bs;
4979 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4980 AioContext *aio_context = bdrv_get_aio_context(bs);
4982 aio_context_acquire(aio_context);
4983 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4984 aio_context_release(aio_context);
4988 int bdrv_flush(BlockDriverState *bs)
4990 Coroutine *co;
4991 RwCo rwco = {
4992 .bs = bs,
4993 .ret = NOT_DONE,
4996 if (qemu_in_coroutine()) {
4997 /* Fast-path if already in coroutine context */
4998 bdrv_flush_co_entry(&rwco);
4999 } else {
5000 AioContext *aio_context = bdrv_get_aio_context(bs);
5002 co = qemu_coroutine_create(bdrv_flush_co_entry);
5003 qemu_coroutine_enter(co, &rwco);
5004 while (rwco.ret == NOT_DONE) {
5005 aio_poll(aio_context, true);
5009 return rwco.ret;
5012 typedef struct DiscardCo {
5013 BlockDriverState *bs;
5014 int64_t sector_num;
5015 int nb_sectors;
5016 int ret;
5017 } DiscardCo;
5018 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
5020 DiscardCo *rwco = opaque;
5022 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
5025 /* if no limit is specified in the BlockLimits use a default
5026 * of 32768 512-byte sectors (16 MiB) per request.
5028 #define MAX_DISCARD_DEFAULT 32768
5030 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
5031 int nb_sectors)
5033 int max_discard;
5035 if (!bs->drv) {
5036 return -ENOMEDIUM;
5037 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
5038 return -EIO;
5039 } else if (bs->read_only) {
5040 return -EROFS;
5043 bdrv_reset_dirty(bs, sector_num, nb_sectors);
5045 /* Do nothing if disabled. */
5046 if (!(bs->open_flags & BDRV_O_UNMAP)) {
5047 return 0;
5050 if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
5051 return 0;
5054 max_discard = bs->bl.max_discard ? bs->bl.max_discard : MAX_DISCARD_DEFAULT;
5055 while (nb_sectors > 0) {
5056 int ret;
5057 int num = nb_sectors;
5059 /* align request */
5060 if (bs->bl.discard_alignment &&
5061 num >= bs->bl.discard_alignment &&
5062 sector_num % bs->bl.discard_alignment) {
5063 if (num > bs->bl.discard_alignment) {
5064 num = bs->bl.discard_alignment;
5066 num -= sector_num % bs->bl.discard_alignment;
5069 /* limit request size */
5070 if (num > max_discard) {
5071 num = max_discard;
5074 if (bs->drv->bdrv_co_discard) {
5075 ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
5076 } else {
5077 BlockDriverAIOCB *acb;
5078 CoroutineIOCompletion co = {
5079 .coroutine = qemu_coroutine_self(),
5082 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
5083 bdrv_co_io_em_complete, &co);
5084 if (acb == NULL) {
5085 return -EIO;
5086 } else {
5087 qemu_coroutine_yield();
5088 ret = co.ret;
5091 if (ret && ret != -ENOTSUP) {
5092 return ret;
5095 sector_num += num;
5096 nb_sectors -= num;
5098 return 0;
5101 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
5103 Coroutine *co;
5104 DiscardCo rwco = {
5105 .bs = bs,
5106 .sector_num = sector_num,
5107 .nb_sectors = nb_sectors,
5108 .ret = NOT_DONE,
5111 if (qemu_in_coroutine()) {
5112 /* Fast-path if already in coroutine context */
5113 bdrv_discard_co_entry(&rwco);
5114 } else {
5115 AioContext *aio_context = bdrv_get_aio_context(bs);
5117 co = qemu_coroutine_create(bdrv_discard_co_entry);
5118 qemu_coroutine_enter(co, &rwco);
5119 while (rwco.ret == NOT_DONE) {
5120 aio_poll(aio_context, true);
5124 return rwco.ret;
5127 /**************************************************************/
5128 /* removable device support */
5131 * Return TRUE if the media is present
5133 int bdrv_is_inserted(BlockDriverState *bs)
5135 BlockDriver *drv = bs->drv;
5137 if (!drv)
5138 return 0;
5139 if (!drv->bdrv_is_inserted)
5140 return 1;
5141 return drv->bdrv_is_inserted(bs);
5145 * Return whether the media changed since the last call to this
5146 * function, or -ENOTSUP if we don't know. Most drivers don't know.
5148 int bdrv_media_changed(BlockDriverState *bs)
5150 BlockDriver *drv = bs->drv;
5152 if (drv && drv->bdrv_media_changed) {
5153 return drv->bdrv_media_changed(bs);
5155 return -ENOTSUP;
5159 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5161 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
5163 BlockDriver *drv = bs->drv;
5165 if (drv && drv->bdrv_eject) {
5166 drv->bdrv_eject(bs, eject_flag);
5169 if (bs->device_name[0] != '\0') {
5170 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
5171 eject_flag, &error_abort);
5176 * Lock or unlock the media (if it is locked, the user won't be able
5177 * to eject it manually).
5179 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
5181 BlockDriver *drv = bs->drv;
5183 trace_bdrv_lock_medium(bs, locked);
5185 if (drv && drv->bdrv_lock_medium) {
5186 drv->bdrv_lock_medium(bs, locked);
5190 /* needed for generic scsi interface */
5192 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
5194 BlockDriver *drv = bs->drv;
5196 if (drv && drv->bdrv_ioctl)
5197 return drv->bdrv_ioctl(bs, req, buf);
5198 return -ENOTSUP;
5201 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
5202 unsigned long int req, void *buf,
5203 BlockDriverCompletionFunc *cb, void *opaque)
5205 BlockDriver *drv = bs->drv;
5207 if (drv && drv->bdrv_aio_ioctl)
5208 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
5209 return NULL;
5212 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
5214 bs->guest_block_size = align;
5217 void *qemu_blockalign(BlockDriverState *bs, size_t size)
5219 return qemu_memalign(bdrv_opt_mem_align(bs), size);
5223 * Check if all memory in this vector is sector aligned.
5225 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
5227 int i;
5228 size_t alignment = bdrv_opt_mem_align(bs);
5230 for (i = 0; i < qiov->niov; i++) {
5231 if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
5232 return false;
5234 if (qiov->iov[i].iov_len % alignment) {
5235 return false;
5239 return true;
5242 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity,
5243 Error **errp)
5245 int64_t bitmap_size;
5246 BdrvDirtyBitmap *bitmap;
5248 assert((granularity & (granularity - 1)) == 0);
5250 granularity >>= BDRV_SECTOR_BITS;
5251 assert(granularity);
5252 bitmap_size = bdrv_getlength(bs);
5253 if (bitmap_size < 0) {
5254 error_setg_errno(errp, -bitmap_size, "could not get length of device");
5255 errno = -bitmap_size;
5256 return NULL;
5258 bitmap_size >>= BDRV_SECTOR_BITS;
5259 bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
5260 bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5261 QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5262 return bitmap;
5265 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5267 BdrvDirtyBitmap *bm, *next;
5268 QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5269 if (bm == bitmap) {
5270 QLIST_REMOVE(bitmap, list);
5271 hbitmap_free(bitmap->bitmap);
5272 g_free(bitmap);
5273 return;
5278 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5280 BdrvDirtyBitmap *bm;
5281 BlockDirtyInfoList *list = NULL;
5282 BlockDirtyInfoList **plist = &list;
5284 QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5285 BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5286 BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5287 info->count = bdrv_get_dirty_count(bs, bm);
5288 info->granularity =
5289 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5290 entry->value = info;
5291 *plist = entry;
5292 plist = &entry->next;
5295 return list;
5298 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5300 if (bitmap) {
5301 return hbitmap_get(bitmap->bitmap, sector);
5302 } else {
5303 return 0;
5307 void bdrv_dirty_iter_init(BlockDriverState *bs,
5308 BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5310 hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5313 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5314 int nr_sectors)
5316 BdrvDirtyBitmap *bitmap;
5317 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5318 hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5322 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5324 BdrvDirtyBitmap *bitmap;
5325 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5326 hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5330 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5332 return hbitmap_count(bitmap->bitmap);
5335 /* Get a reference to bs */
5336 void bdrv_ref(BlockDriverState *bs)
5338 bs->refcnt++;
5341 /* Release a previously grabbed reference to bs.
5342 * If after releasing, reference count is zero, the BlockDriverState is
5343 * deleted. */
5344 void bdrv_unref(BlockDriverState *bs)
5346 assert(bs->refcnt > 0);
5347 if (--bs->refcnt == 0) {
5348 bdrv_delete(bs);
5352 struct BdrvOpBlocker {
5353 Error *reason;
5354 QLIST_ENTRY(BdrvOpBlocker) list;
5357 bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp)
5359 BdrvOpBlocker *blocker;
5360 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5361 if (!QLIST_EMPTY(&bs->op_blockers[op])) {
5362 blocker = QLIST_FIRST(&bs->op_blockers[op]);
5363 if (errp) {
5364 error_setg(errp, "Device '%s' is busy: %s",
5365 bs->device_name, error_get_pretty(blocker->reason));
5367 return true;
5369 return false;
5372 void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason)
5374 BdrvOpBlocker *blocker;
5375 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5377 blocker = g_malloc0(sizeof(BdrvOpBlocker));
5378 blocker->reason = reason;
5379 QLIST_INSERT_HEAD(&bs->op_blockers[op], blocker, list);
5382 void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason)
5384 BdrvOpBlocker *blocker, *next;
5385 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5386 QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) {
5387 if (blocker->reason == reason) {
5388 QLIST_REMOVE(blocker, list);
5389 g_free(blocker);
5394 void bdrv_op_block_all(BlockDriverState *bs, Error *reason)
5396 int i;
5397 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5398 bdrv_op_block(bs, i, reason);
5402 void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason)
5404 int i;
5405 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5406 bdrv_op_unblock(bs, i, reason);
5410 bool bdrv_op_blocker_is_empty(BlockDriverState *bs)
5412 int i;
5414 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5415 if (!QLIST_EMPTY(&bs->op_blockers[i])) {
5416 return false;
5419 return true;
5422 void bdrv_iostatus_enable(BlockDriverState *bs)
5424 bs->iostatus_enabled = true;
5425 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5428 /* The I/O status is only enabled if the drive explicitly
5429 * enables it _and_ the VM is configured to stop on errors */
5430 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5432 return (bs->iostatus_enabled &&
5433 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5434 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
5435 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5438 void bdrv_iostatus_disable(BlockDriverState *bs)
5440 bs->iostatus_enabled = false;
5443 void bdrv_iostatus_reset(BlockDriverState *bs)
5445 if (bdrv_iostatus_is_enabled(bs)) {
5446 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5447 if (bs->job) {
5448 block_job_iostatus_reset(bs->job);
5453 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5455 assert(bdrv_iostatus_is_enabled(bs));
5456 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5457 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5458 BLOCK_DEVICE_IO_STATUS_FAILED;
5462 void
5463 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5464 enum BlockAcctType type)
5466 assert(type < BDRV_MAX_IOTYPE);
5468 cookie->bytes = bytes;
5469 cookie->start_time_ns = get_clock();
5470 cookie->type = type;
5473 void
5474 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5476 assert(cookie->type < BDRV_MAX_IOTYPE);
5478 bs->nr_bytes[cookie->type] += cookie->bytes;
5479 bs->nr_ops[cookie->type]++;
5480 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5483 void bdrv_img_create(const char *filename, const char *fmt,
5484 const char *base_filename, const char *base_fmt,
5485 char *options, uint64_t img_size, int flags,
5486 Error **errp, bool quiet)
5488 QemuOptsList *create_opts = NULL;
5489 QemuOpts *opts = NULL;
5490 const char *backing_fmt, *backing_file;
5491 int64_t size;
5492 BlockDriver *drv, *proto_drv;
5493 BlockDriver *backing_drv = NULL;
5494 Error *local_err = NULL;
5495 int ret = 0;
5497 /* Find driver and parse its options */
5498 drv = bdrv_find_format(fmt);
5499 if (!drv) {
5500 error_setg(errp, "Unknown file format '%s'", fmt);
5501 return;
5504 proto_drv = bdrv_find_protocol(filename, true);
5505 if (!proto_drv) {
5506 error_setg(errp, "Unknown protocol '%s'", filename);
5507 return;
5510 create_opts = qemu_opts_append(create_opts, drv->create_opts);
5511 create_opts = qemu_opts_append(create_opts, proto_drv->create_opts);
5513 /* Create parameter list with default values */
5514 opts = qemu_opts_create(create_opts, NULL, 0, &error_abort);
5515 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, img_size);
5517 /* Parse -o options */
5518 if (options) {
5519 if (qemu_opts_do_parse(opts, options, NULL) != 0) {
5520 error_setg(errp, "Invalid options for file format '%s'", fmt);
5521 goto out;
5525 if (base_filename) {
5526 if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FILE, base_filename)) {
5527 error_setg(errp, "Backing file not supported for file format '%s'",
5528 fmt);
5529 goto out;
5533 if (base_fmt) {
5534 if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5535 error_setg(errp, "Backing file format not supported for file "
5536 "format '%s'", fmt);
5537 goto out;
5541 backing_file = qemu_opt_get(opts, BLOCK_OPT_BACKING_FILE);
5542 if (backing_file) {
5543 if (!strcmp(filename, backing_file)) {
5544 error_setg(errp, "Error: Trying to create an image with the "
5545 "same filename as the backing file");
5546 goto out;
5550 backing_fmt = qemu_opt_get(opts, BLOCK_OPT_BACKING_FMT);
5551 if (backing_fmt) {
5552 backing_drv = bdrv_find_format(backing_fmt);
5553 if (!backing_drv) {
5554 error_setg(errp, "Unknown backing file format '%s'",
5555 backing_fmt);
5556 goto out;
5560 // The size for the image must always be specified, with one exception:
5561 // If we are using a backing file, we can obtain the size from there
5562 size = qemu_opt_get_size(opts, BLOCK_OPT_SIZE, 0);
5563 if (size == -1) {
5564 if (backing_file) {
5565 BlockDriverState *bs;
5566 uint64_t size;
5567 int back_flags;
5569 /* backing files always opened read-only */
5570 back_flags =
5571 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5573 bs = NULL;
5574 ret = bdrv_open(&bs, backing_file, NULL, NULL, back_flags,
5575 backing_drv, &local_err);
5576 if (ret < 0) {
5577 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5578 backing_file,
5579 error_get_pretty(local_err));
5580 error_free(local_err);
5581 local_err = NULL;
5582 goto out;
5584 bdrv_get_geometry(bs, &size);
5585 size *= 512;
5587 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, size);
5589 bdrv_unref(bs);
5590 } else {
5591 error_setg(errp, "Image creation needs a size parameter");
5592 goto out;
5596 if (!quiet) {
5597 printf("Formatting '%s', fmt=%s ", filename, fmt);
5598 qemu_opts_print(opts);
5599 puts("");
5602 ret = bdrv_create(drv, filename, opts, &local_err);
5604 if (ret == -EFBIG) {
5605 /* This is generally a better message than whatever the driver would
5606 * deliver (especially because of the cluster_size_hint), since that
5607 * is most probably not much different from "image too large". */
5608 const char *cluster_size_hint = "";
5609 if (qemu_opt_get_size(opts, BLOCK_OPT_CLUSTER_SIZE, 0)) {
5610 cluster_size_hint = " (try using a larger cluster size)";
5612 error_setg(errp, "The image size is too large for file format '%s'"
5613 "%s", fmt, cluster_size_hint);
5614 error_free(local_err);
5615 local_err = NULL;
5618 out:
5619 qemu_opts_del(opts);
5620 qemu_opts_free(create_opts);
5621 if (local_err) {
5622 error_propagate(errp, local_err);
5626 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5628 return bs->aio_context;
5631 void bdrv_detach_aio_context(BlockDriverState *bs)
5633 if (!bs->drv) {
5634 return;
5637 if (bs->io_limits_enabled) {
5638 throttle_detach_aio_context(&bs->throttle_state);
5640 if (bs->drv->bdrv_detach_aio_context) {
5641 bs->drv->bdrv_detach_aio_context(bs);
5643 if (bs->file) {
5644 bdrv_detach_aio_context(bs->file);
5646 if (bs->backing_hd) {
5647 bdrv_detach_aio_context(bs->backing_hd);
5650 bs->aio_context = NULL;
5653 void bdrv_attach_aio_context(BlockDriverState *bs,
5654 AioContext *new_context)
5656 if (!bs->drv) {
5657 return;
5660 bs->aio_context = new_context;
5662 if (bs->backing_hd) {
5663 bdrv_attach_aio_context(bs->backing_hd, new_context);
5665 if (bs->file) {
5666 bdrv_attach_aio_context(bs->file, new_context);
5668 if (bs->drv->bdrv_attach_aio_context) {
5669 bs->drv->bdrv_attach_aio_context(bs, new_context);
5671 if (bs->io_limits_enabled) {
5672 throttle_attach_aio_context(&bs->throttle_state, new_context);
5676 void bdrv_set_aio_context(BlockDriverState *bs, AioContext *new_context)
5678 bdrv_drain_all(); /* ensure there are no in-flight requests */
5680 bdrv_detach_aio_context(bs);
5682 /* This function executes in the old AioContext so acquire the new one in
5683 * case it runs in a different thread.
5685 aio_context_acquire(new_context);
5686 bdrv_attach_aio_context(bs, new_context);
5687 aio_context_release(new_context);
5690 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5691 NotifierWithReturn *notifier)
5693 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5696 int bdrv_amend_options(BlockDriverState *bs, QemuOpts *opts)
5698 if (!bs->drv->bdrv_amend_options) {
5699 return -ENOTSUP;
5701 return bs->drv->bdrv_amend_options(bs, opts);
5704 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5705 * of block filter and by bdrv_is_first_non_filter.
5706 * It is used to test if the given bs is the candidate or recurse more in the
5707 * node graph.
5709 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5710 BlockDriverState *candidate)
5712 /* return false if basic checks fails */
5713 if (!bs || !bs->drv) {
5714 return false;
5717 /* the code reached a non block filter driver -> check if the bs is
5718 * the same as the candidate. It's the recursion termination condition.
5720 if (!bs->drv->is_filter) {
5721 return bs == candidate;
5723 /* Down this path the driver is a block filter driver */
5725 /* If the block filter recursion method is defined use it to recurse down
5726 * the node graph.
5728 if (bs->drv->bdrv_recurse_is_first_non_filter) {
5729 return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5732 /* the driver is a block filter but don't allow to recurse -> return false
5734 return false;
5737 /* This function checks if the candidate is the first non filter bs down it's
5738 * bs chain. Since we don't have pointers to parents it explore all bs chains
5739 * from the top. Some filters can choose not to pass down the recursion.
5741 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5743 BlockDriverState *bs;
5745 /* walk down the bs forest recursively */
5746 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5747 bool perm;
5749 /* try to recurse in this top level bs */
5750 perm = bdrv_recurse_is_first_non_filter(bs, candidate);
5752 /* candidate is the first non filter */
5753 if (perm) {
5754 return true;
5758 return false;
5761 BlockDriverState *check_to_replace_node(const char *node_name, Error **errp)
5763 BlockDriverState *to_replace_bs = bdrv_find_node(node_name);
5764 if (!to_replace_bs) {
5765 error_setg(errp, "Node name '%s' not found", node_name);
5766 return NULL;
5769 if (bdrv_op_is_blocked(to_replace_bs, BLOCK_OP_TYPE_REPLACE, errp)) {
5770 return NULL;
5773 /* We don't want arbitrary node of the BDS chain to be replaced only the top
5774 * most non filter in order to prevent data corruption.
5775 * Another benefit is that this tests exclude backing files which are
5776 * blocked by the backing blockers.
5778 if (!bdrv_is_first_non_filter(to_replace_bs)) {
5779 error_setg(errp, "Only top most non filter can be replaced");
5780 return NULL;
5783 return to_replace_bs;