docs: Build and install all the docs in a single manual
[qemu/ar7.git] / hw / ppc / e500.c
blobc64b5d08bde31a61a48edcb45726a2dbc6dcad88
1 /*
2 * QEMU PowerPC e500-based platforms
4 * Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved.
6 * Author: Yu Liu, <yu.liu@freescale.com>
8 * This file is derived from hw/ppc440_bamboo.c,
9 * the copyright for that material belongs to the original owners.
11 * This is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
17 #include "qemu/osdep.h"
18 #include "qemu-common.h"
19 #include "qemu/datadir.h"
20 #include "qemu/units.h"
21 #include "qapi/error.h"
22 #include "e500.h"
23 #include "e500-ccsr.h"
24 #include "net/net.h"
25 #include "qemu/config-file.h"
26 #include "hw/char/serial.h"
27 #include "hw/pci/pci.h"
28 #include "hw/boards.h"
29 #include "sysemu/sysemu.h"
30 #include "sysemu/kvm.h"
31 #include "sysemu/reset.h"
32 #include "sysemu/runstate.h"
33 #include "kvm_ppc.h"
34 #include "sysemu/device_tree.h"
35 #include "hw/ppc/openpic.h"
36 #include "hw/ppc/openpic_kvm.h"
37 #include "hw/ppc/ppc.h"
38 #include "hw/qdev-properties.h"
39 #include "hw/loader.h"
40 #include "elf.h"
41 #include "hw/sysbus.h"
42 #include "exec/address-spaces.h"
43 #include "qemu/host-utils.h"
44 #include "qemu/option.h"
45 #include "hw/pci-host/ppce500.h"
46 #include "qemu/error-report.h"
47 #include "hw/platform-bus.h"
48 #include "hw/net/fsl_etsec/etsec.h"
49 #include "hw/i2c/i2c.h"
50 #include "hw/irq.h"
52 #define EPAPR_MAGIC (0x45504150)
53 #define BINARY_DEVICE_TREE_FILE "mpc8544ds.dtb"
54 #define DTC_LOAD_PAD 0x1800000
55 #define DTC_PAD_MASK 0xFFFFF
56 #define DTB_MAX_SIZE (8 * MiB)
57 #define INITRD_LOAD_PAD 0x2000000
58 #define INITRD_PAD_MASK 0xFFFFFF
60 #define RAM_SIZES_ALIGN (64 * MiB)
62 /* TODO: parameterize */
63 #define MPC8544_CCSRBAR_SIZE 0x00100000ULL
64 #define MPC8544_MPIC_REGS_OFFSET 0x40000ULL
65 #define MPC8544_MSI_REGS_OFFSET 0x41600ULL
66 #define MPC8544_SERIAL0_REGS_OFFSET 0x4500ULL
67 #define MPC8544_SERIAL1_REGS_OFFSET 0x4600ULL
68 #define MPC8544_PCI_REGS_OFFSET 0x8000ULL
69 #define MPC8544_PCI_REGS_SIZE 0x1000ULL
70 #define MPC8544_UTIL_OFFSET 0xe0000ULL
71 #define MPC8XXX_GPIO_OFFSET 0x000FF000ULL
72 #define MPC8544_I2C_REGS_OFFSET 0x3000ULL
73 #define MPC8XXX_GPIO_IRQ 47
74 #define MPC8544_I2C_IRQ 43
75 #define RTC_REGS_OFFSET 0x68
77 struct boot_info
79 uint32_t dt_base;
80 uint32_t dt_size;
81 uint32_t entry;
84 static uint32_t *pci_map_create(void *fdt, uint32_t mpic, int first_slot,
85 int nr_slots, int *len)
87 int i = 0;
88 int slot;
89 int pci_irq;
90 int host_irq;
91 int last_slot = first_slot + nr_slots;
92 uint32_t *pci_map;
94 *len = nr_slots * 4 * 7 * sizeof(uint32_t);
95 pci_map = g_malloc(*len);
97 for (slot = first_slot; slot < last_slot; slot++) {
98 for (pci_irq = 0; pci_irq < 4; pci_irq++) {
99 pci_map[i++] = cpu_to_be32(slot << 11);
100 pci_map[i++] = cpu_to_be32(0x0);
101 pci_map[i++] = cpu_to_be32(0x0);
102 pci_map[i++] = cpu_to_be32(pci_irq + 1);
103 pci_map[i++] = cpu_to_be32(mpic);
104 host_irq = ppce500_pci_map_irq_slot(slot, pci_irq);
105 pci_map[i++] = cpu_to_be32(host_irq + 1);
106 pci_map[i++] = cpu_to_be32(0x1);
110 assert((i * sizeof(uint32_t)) == *len);
112 return pci_map;
115 static void dt_serial_create(void *fdt, unsigned long long offset,
116 const char *soc, const char *mpic,
117 const char *alias, int idx, bool defcon)
119 char *ser;
121 ser = g_strdup_printf("%s/serial@%llx", soc, offset);
122 qemu_fdt_add_subnode(fdt, ser);
123 qemu_fdt_setprop_string(fdt, ser, "device_type", "serial");
124 qemu_fdt_setprop_string(fdt, ser, "compatible", "ns16550");
125 qemu_fdt_setprop_cells(fdt, ser, "reg", offset, 0x100);
126 qemu_fdt_setprop_cell(fdt, ser, "cell-index", idx);
127 qemu_fdt_setprop_cell(fdt, ser, "clock-frequency", 0);
128 qemu_fdt_setprop_cells(fdt, ser, "interrupts", 42, 2);
129 qemu_fdt_setprop_phandle(fdt, ser, "interrupt-parent", mpic);
130 qemu_fdt_setprop_string(fdt, "/aliases", alias, ser);
132 if (defcon) {
134 * "linux,stdout-path" and "stdout" properties are deprecated by linux
135 * kernel. New platforms should only use the "stdout-path" property. Set
136 * the new property and continue using older property to remain
137 * compatible with the existing firmware.
139 qemu_fdt_setprop_string(fdt, "/chosen", "linux,stdout-path", ser);
140 qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", ser);
142 g_free(ser);
145 static void create_dt_mpc8xxx_gpio(void *fdt, const char *soc, const char *mpic)
147 hwaddr mmio0 = MPC8XXX_GPIO_OFFSET;
148 int irq0 = MPC8XXX_GPIO_IRQ;
149 gchar *node = g_strdup_printf("%s/gpio@%"PRIx64, soc, mmio0);
150 gchar *poweroff = g_strdup_printf("%s/power-off", soc);
151 int gpio_ph;
153 qemu_fdt_add_subnode(fdt, node);
154 qemu_fdt_setprop_string(fdt, node, "compatible", "fsl,qoriq-gpio");
155 qemu_fdt_setprop_cells(fdt, node, "reg", mmio0, 0x1000);
156 qemu_fdt_setprop_cells(fdt, node, "interrupts", irq0, 0x2);
157 qemu_fdt_setprop_phandle(fdt, node, "interrupt-parent", mpic);
158 qemu_fdt_setprop_cells(fdt, node, "#gpio-cells", 2);
159 qemu_fdt_setprop(fdt, node, "gpio-controller", NULL, 0);
160 gpio_ph = qemu_fdt_alloc_phandle(fdt);
161 qemu_fdt_setprop_cell(fdt, node, "phandle", gpio_ph);
162 qemu_fdt_setprop_cell(fdt, node, "linux,phandle", gpio_ph);
164 /* Power Off Pin */
165 qemu_fdt_add_subnode(fdt, poweroff);
166 qemu_fdt_setprop_string(fdt, poweroff, "compatible", "gpio-poweroff");
167 qemu_fdt_setprop_cells(fdt, poweroff, "gpios", gpio_ph, 0, 0);
169 g_free(node);
170 g_free(poweroff);
173 static void dt_rtc_create(void *fdt, const char *i2c, const char *alias)
175 int offset = RTC_REGS_OFFSET;
177 gchar *rtc = g_strdup_printf("%s/rtc@%"PRIx32, i2c, offset);
178 qemu_fdt_add_subnode(fdt, rtc);
179 qemu_fdt_setprop_string(fdt, rtc, "compatible", "pericom,pt7c4338");
180 qemu_fdt_setprop_cells(fdt, rtc, "reg", offset);
181 qemu_fdt_setprop_string(fdt, "/aliases", alias, rtc);
183 g_free(rtc);
186 static void dt_i2c_create(void *fdt, const char *soc, const char *mpic,
187 const char *alias)
189 hwaddr mmio0 = MPC8544_I2C_REGS_OFFSET;
190 int irq0 = MPC8544_I2C_IRQ;
192 gchar *i2c = g_strdup_printf("%s/i2c@%"PRIx64, soc, mmio0);
193 qemu_fdt_add_subnode(fdt, i2c);
194 qemu_fdt_setprop_string(fdt, i2c, "device_type", "i2c");
195 qemu_fdt_setprop_string(fdt, i2c, "compatible", "fsl-i2c");
196 qemu_fdt_setprop_cells(fdt, i2c, "reg", mmio0, 0x14);
197 qemu_fdt_setprop_cells(fdt, i2c, "cell-index", 0);
198 qemu_fdt_setprop_cells(fdt, i2c, "interrupts", irq0, 0x2);
199 qemu_fdt_setprop_phandle(fdt, i2c, "interrupt-parent", mpic);
200 qemu_fdt_setprop_string(fdt, "/aliases", alias, i2c);
202 g_free(i2c);
206 typedef struct PlatformDevtreeData {
207 void *fdt;
208 const char *mpic;
209 int irq_start;
210 const char *node;
211 PlatformBusDevice *pbus;
212 } PlatformDevtreeData;
214 static int create_devtree_etsec(SysBusDevice *sbdev, PlatformDevtreeData *data)
216 eTSEC *etsec = ETSEC_COMMON(sbdev);
217 PlatformBusDevice *pbus = data->pbus;
218 hwaddr mmio0 = platform_bus_get_mmio_addr(pbus, sbdev, 0);
219 int irq0 = platform_bus_get_irqn(pbus, sbdev, 0);
220 int irq1 = platform_bus_get_irqn(pbus, sbdev, 1);
221 int irq2 = platform_bus_get_irqn(pbus, sbdev, 2);
222 gchar *node = g_strdup_printf("/platform/ethernet@%"PRIx64, mmio0);
223 gchar *group = g_strdup_printf("%s/queue-group", node);
224 void *fdt = data->fdt;
226 assert((int64_t)mmio0 >= 0);
227 assert(irq0 >= 0);
228 assert(irq1 >= 0);
229 assert(irq2 >= 0);
231 qemu_fdt_add_subnode(fdt, node);
232 qemu_fdt_setprop_string(fdt, node, "device_type", "network");
233 qemu_fdt_setprop_string(fdt, node, "compatible", "fsl,etsec2");
234 qemu_fdt_setprop_string(fdt, node, "model", "eTSEC");
235 qemu_fdt_setprop(fdt, node, "local-mac-address", etsec->conf.macaddr.a, 6);
236 qemu_fdt_setprop_cells(fdt, node, "fixed-link", 0, 1, 1000, 0, 0);
238 qemu_fdt_add_subnode(fdt, group);
239 qemu_fdt_setprop_cells(fdt, group, "reg", mmio0, 0x1000);
240 qemu_fdt_setprop_cells(fdt, group, "interrupts",
241 data->irq_start + irq0, 0x2,
242 data->irq_start + irq1, 0x2,
243 data->irq_start + irq2, 0x2);
245 g_free(node);
246 g_free(group);
248 return 0;
251 static void sysbus_device_create_devtree(SysBusDevice *sbdev, void *opaque)
253 PlatformDevtreeData *data = opaque;
254 bool matched = false;
256 if (object_dynamic_cast(OBJECT(sbdev), TYPE_ETSEC_COMMON)) {
257 create_devtree_etsec(sbdev, data);
258 matched = true;
261 if (!matched) {
262 error_report("Device %s is not supported by this machine yet.",
263 qdev_fw_name(DEVICE(sbdev)));
264 exit(1);
268 static void platform_bus_create_devtree(PPCE500MachineState *pms,
269 void *fdt, const char *mpic)
271 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms);
272 gchar *node = g_strdup_printf("/platform@%"PRIx64, pmc->platform_bus_base);
273 const char platcomp[] = "qemu,platform\0simple-bus";
274 uint64_t addr = pmc->platform_bus_base;
275 uint64_t size = pmc->platform_bus_size;
276 int irq_start = pmc->platform_bus_first_irq;
278 /* Create a /platform node that we can put all devices into */
280 qemu_fdt_add_subnode(fdt, node);
281 qemu_fdt_setprop(fdt, node, "compatible", platcomp, sizeof(platcomp));
283 /* Our platform bus region is less than 32bit big, so 1 cell is enough for
284 address and size */
285 qemu_fdt_setprop_cells(fdt, node, "#size-cells", 1);
286 qemu_fdt_setprop_cells(fdt, node, "#address-cells", 1);
287 qemu_fdt_setprop_cells(fdt, node, "ranges", 0, addr >> 32, addr, size);
289 qemu_fdt_setprop_phandle(fdt, node, "interrupt-parent", mpic);
291 /* Create dt nodes for dynamic devices */
292 PlatformDevtreeData data = {
293 .fdt = fdt,
294 .mpic = mpic,
295 .irq_start = irq_start,
296 .node = node,
297 .pbus = pms->pbus_dev,
300 /* Loop through all dynamic sysbus devices and create nodes for them */
301 foreach_dynamic_sysbus_device(sysbus_device_create_devtree, &data);
303 g_free(node);
306 static int ppce500_load_device_tree(PPCE500MachineState *pms,
307 hwaddr addr,
308 hwaddr initrd_base,
309 hwaddr initrd_size,
310 hwaddr kernel_base,
311 hwaddr kernel_size,
312 bool dry_run)
314 MachineState *machine = MACHINE(pms);
315 unsigned int smp_cpus = machine->smp.cpus;
316 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms);
317 CPUPPCState *env = first_cpu->env_ptr;
318 int ret = -1;
319 uint64_t mem_reg_property[] = { 0, cpu_to_be64(machine->ram_size) };
320 int fdt_size;
321 void *fdt;
322 uint8_t hypercall[16];
323 uint32_t clock_freq = 400000000;
324 uint32_t tb_freq = 400000000;
325 int i;
326 char compatible_sb[] = "fsl,mpc8544-immr\0simple-bus";
327 char *soc;
328 char *mpic;
329 uint32_t mpic_ph;
330 uint32_t msi_ph;
331 char *gutil;
332 char *pci;
333 char *msi;
334 uint32_t *pci_map = NULL;
335 int len;
336 uint32_t pci_ranges[14] =
338 0x2000000, 0x0, pmc->pci_mmio_bus_base,
339 pmc->pci_mmio_base >> 32, pmc->pci_mmio_base,
340 0x0, 0x20000000,
342 0x1000000, 0x0, 0x0,
343 pmc->pci_pio_base >> 32, pmc->pci_pio_base,
344 0x0, 0x10000,
346 const char *dtb_file = machine->dtb;
347 const char *toplevel_compat = machine->dt_compatible;
349 if (dtb_file) {
350 char *filename;
351 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, dtb_file);
352 if (!filename) {
353 goto out;
356 fdt = load_device_tree(filename, &fdt_size);
357 g_free(filename);
358 if (!fdt) {
359 goto out;
361 goto done;
364 fdt = create_device_tree(&fdt_size);
365 if (fdt == NULL) {
366 goto out;
369 /* Manipulate device tree in memory. */
370 qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 2);
371 qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 2);
373 qemu_fdt_add_subnode(fdt, "/memory");
374 qemu_fdt_setprop_string(fdt, "/memory", "device_type", "memory");
375 qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property,
376 sizeof(mem_reg_property));
378 qemu_fdt_add_subnode(fdt, "/chosen");
379 if (initrd_size) {
380 ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start",
381 initrd_base);
382 if (ret < 0) {
383 fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n");
386 ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end",
387 (initrd_base + initrd_size));
388 if (ret < 0) {
389 fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n");
394 if (kernel_base != -1ULL) {
395 qemu_fdt_setprop_cells(fdt, "/chosen", "qemu,boot-kernel",
396 kernel_base >> 32, kernel_base,
397 kernel_size >> 32, kernel_size);
400 ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs",
401 machine->kernel_cmdline);
402 if (ret < 0)
403 fprintf(stderr, "couldn't set /chosen/bootargs\n");
405 if (kvm_enabled()) {
406 /* Read out host's frequencies */
407 clock_freq = kvmppc_get_clockfreq();
408 tb_freq = kvmppc_get_tbfreq();
410 /* indicate KVM hypercall interface */
411 qemu_fdt_add_subnode(fdt, "/hypervisor");
412 qemu_fdt_setprop_string(fdt, "/hypervisor", "compatible",
413 "linux,kvm");
414 kvmppc_get_hypercall(env, hypercall, sizeof(hypercall));
415 qemu_fdt_setprop(fdt, "/hypervisor", "hcall-instructions",
416 hypercall, sizeof(hypercall));
417 /* if KVM supports the idle hcall, set property indicating this */
418 if (kvmppc_get_hasidle(env)) {
419 qemu_fdt_setprop(fdt, "/hypervisor", "has-idle", NULL, 0);
423 /* Create CPU nodes */
424 qemu_fdt_add_subnode(fdt, "/cpus");
425 qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 1);
426 qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0);
428 /* We need to generate the cpu nodes in reverse order, so Linux can pick
429 the first node as boot node and be happy */
430 for (i = smp_cpus - 1; i >= 0; i--) {
431 CPUState *cpu;
432 char *cpu_name;
433 uint64_t cpu_release_addr = pmc->spin_base + (i * 0x20);
435 cpu = qemu_get_cpu(i);
436 if (cpu == NULL) {
437 continue;
439 env = cpu->env_ptr;
441 cpu_name = g_strdup_printf("/cpus/PowerPC,8544@%x", i);
442 qemu_fdt_add_subnode(fdt, cpu_name);
443 qemu_fdt_setprop_cell(fdt, cpu_name, "clock-frequency", clock_freq);
444 qemu_fdt_setprop_cell(fdt, cpu_name, "timebase-frequency", tb_freq);
445 qemu_fdt_setprop_string(fdt, cpu_name, "device_type", "cpu");
446 qemu_fdt_setprop_cell(fdt, cpu_name, "reg", i);
447 qemu_fdt_setprop_cell(fdt, cpu_name, "d-cache-line-size",
448 env->dcache_line_size);
449 qemu_fdt_setprop_cell(fdt, cpu_name, "i-cache-line-size",
450 env->icache_line_size);
451 qemu_fdt_setprop_cell(fdt, cpu_name, "d-cache-size", 0x8000);
452 qemu_fdt_setprop_cell(fdt, cpu_name, "i-cache-size", 0x8000);
453 qemu_fdt_setprop_cell(fdt, cpu_name, "bus-frequency", 0);
454 if (cpu->cpu_index) {
455 qemu_fdt_setprop_string(fdt, cpu_name, "status", "disabled");
456 qemu_fdt_setprop_string(fdt, cpu_name, "enable-method",
457 "spin-table");
458 qemu_fdt_setprop_u64(fdt, cpu_name, "cpu-release-addr",
459 cpu_release_addr);
460 } else {
461 qemu_fdt_setprop_string(fdt, cpu_name, "status", "okay");
463 g_free(cpu_name);
466 qemu_fdt_add_subnode(fdt, "/aliases");
467 /* XXX These should go into their respective devices' code */
468 soc = g_strdup_printf("/soc@%"PRIx64, pmc->ccsrbar_base);
469 qemu_fdt_add_subnode(fdt, soc);
470 qemu_fdt_setprop_string(fdt, soc, "device_type", "soc");
471 qemu_fdt_setprop(fdt, soc, "compatible", compatible_sb,
472 sizeof(compatible_sb));
473 qemu_fdt_setprop_cell(fdt, soc, "#address-cells", 1);
474 qemu_fdt_setprop_cell(fdt, soc, "#size-cells", 1);
475 qemu_fdt_setprop_cells(fdt, soc, "ranges", 0x0,
476 pmc->ccsrbar_base >> 32, pmc->ccsrbar_base,
477 MPC8544_CCSRBAR_SIZE);
478 /* XXX should contain a reasonable value */
479 qemu_fdt_setprop_cell(fdt, soc, "bus-frequency", 0);
481 mpic = g_strdup_printf("%s/pic@%llx", soc, MPC8544_MPIC_REGS_OFFSET);
482 qemu_fdt_add_subnode(fdt, mpic);
483 qemu_fdt_setprop_string(fdt, mpic, "device_type", "open-pic");
484 qemu_fdt_setprop_string(fdt, mpic, "compatible", "fsl,mpic");
485 qemu_fdt_setprop_cells(fdt, mpic, "reg", MPC8544_MPIC_REGS_OFFSET,
486 0x40000);
487 qemu_fdt_setprop_cell(fdt, mpic, "#address-cells", 0);
488 qemu_fdt_setprop_cell(fdt, mpic, "#interrupt-cells", 2);
489 mpic_ph = qemu_fdt_alloc_phandle(fdt);
490 qemu_fdt_setprop_cell(fdt, mpic, "phandle", mpic_ph);
491 qemu_fdt_setprop_cell(fdt, mpic, "linux,phandle", mpic_ph);
492 qemu_fdt_setprop(fdt, mpic, "interrupt-controller", NULL, 0);
495 * We have to generate ser1 first, because Linux takes the first
496 * device it finds in the dt as serial output device. And we generate
497 * devices in reverse order to the dt.
499 if (serial_hd(1)) {
500 dt_serial_create(fdt, MPC8544_SERIAL1_REGS_OFFSET,
501 soc, mpic, "serial1", 1, false);
504 if (serial_hd(0)) {
505 dt_serial_create(fdt, MPC8544_SERIAL0_REGS_OFFSET,
506 soc, mpic, "serial0", 0, true);
509 /* i2c */
510 dt_i2c_create(fdt, soc, mpic, "i2c");
512 dt_rtc_create(fdt, "i2c", "rtc");
515 gutil = g_strdup_printf("%s/global-utilities@%llx", soc,
516 MPC8544_UTIL_OFFSET);
517 qemu_fdt_add_subnode(fdt, gutil);
518 qemu_fdt_setprop_string(fdt, gutil, "compatible", "fsl,mpc8544-guts");
519 qemu_fdt_setprop_cells(fdt, gutil, "reg", MPC8544_UTIL_OFFSET, 0x1000);
520 qemu_fdt_setprop(fdt, gutil, "fsl,has-rstcr", NULL, 0);
521 g_free(gutil);
523 msi = g_strdup_printf("/%s/msi@%llx", soc, MPC8544_MSI_REGS_OFFSET);
524 qemu_fdt_add_subnode(fdt, msi);
525 qemu_fdt_setprop_string(fdt, msi, "compatible", "fsl,mpic-msi");
526 qemu_fdt_setprop_cells(fdt, msi, "reg", MPC8544_MSI_REGS_OFFSET, 0x200);
527 msi_ph = qemu_fdt_alloc_phandle(fdt);
528 qemu_fdt_setprop_cells(fdt, msi, "msi-available-ranges", 0x0, 0x100);
529 qemu_fdt_setprop_phandle(fdt, msi, "interrupt-parent", mpic);
530 qemu_fdt_setprop_cells(fdt, msi, "interrupts",
531 0xe0, 0x0,
532 0xe1, 0x0,
533 0xe2, 0x0,
534 0xe3, 0x0,
535 0xe4, 0x0,
536 0xe5, 0x0,
537 0xe6, 0x0,
538 0xe7, 0x0);
539 qemu_fdt_setprop_cell(fdt, msi, "phandle", msi_ph);
540 qemu_fdt_setprop_cell(fdt, msi, "linux,phandle", msi_ph);
541 g_free(msi);
543 pci = g_strdup_printf("/pci@%llx",
544 pmc->ccsrbar_base + MPC8544_PCI_REGS_OFFSET);
545 qemu_fdt_add_subnode(fdt, pci);
546 qemu_fdt_setprop_cell(fdt, pci, "cell-index", 0);
547 qemu_fdt_setprop_string(fdt, pci, "compatible", "fsl,mpc8540-pci");
548 qemu_fdt_setprop_string(fdt, pci, "device_type", "pci");
549 qemu_fdt_setprop_cells(fdt, pci, "interrupt-map-mask", 0xf800, 0x0,
550 0x0, 0x7);
551 pci_map = pci_map_create(fdt, qemu_fdt_get_phandle(fdt, mpic),
552 pmc->pci_first_slot, pmc->pci_nr_slots,
553 &len);
554 qemu_fdt_setprop(fdt, pci, "interrupt-map", pci_map, len);
555 qemu_fdt_setprop_phandle(fdt, pci, "interrupt-parent", mpic);
556 qemu_fdt_setprop_cells(fdt, pci, "interrupts", 24, 2);
557 qemu_fdt_setprop_cells(fdt, pci, "bus-range", 0, 255);
558 for (i = 0; i < 14; i++) {
559 pci_ranges[i] = cpu_to_be32(pci_ranges[i]);
561 qemu_fdt_setprop_cell(fdt, pci, "fsl,msi", msi_ph);
562 qemu_fdt_setprop(fdt, pci, "ranges", pci_ranges, sizeof(pci_ranges));
563 qemu_fdt_setprop_cells(fdt, pci, "reg",
564 (pmc->ccsrbar_base + MPC8544_PCI_REGS_OFFSET) >> 32,
565 (pmc->ccsrbar_base + MPC8544_PCI_REGS_OFFSET),
566 0, 0x1000);
567 qemu_fdt_setprop_cell(fdt, pci, "clock-frequency", 66666666);
568 qemu_fdt_setprop_cell(fdt, pci, "#interrupt-cells", 1);
569 qemu_fdt_setprop_cell(fdt, pci, "#size-cells", 2);
570 qemu_fdt_setprop_cell(fdt, pci, "#address-cells", 3);
571 qemu_fdt_setprop_string(fdt, "/aliases", "pci0", pci);
572 g_free(pci);
574 if (pmc->has_mpc8xxx_gpio) {
575 create_dt_mpc8xxx_gpio(fdt, soc, mpic);
577 g_free(soc);
579 if (pms->pbus_dev) {
580 platform_bus_create_devtree(pms, fdt, mpic);
582 g_free(mpic);
584 pmc->fixup_devtree(fdt);
586 if (toplevel_compat) {
587 qemu_fdt_setprop(fdt, "/", "compatible", toplevel_compat,
588 strlen(toplevel_compat) + 1);
591 done:
592 if (!dry_run) {
593 qemu_fdt_dumpdtb(fdt, fdt_size);
594 cpu_physical_memory_write(addr, fdt, fdt_size);
596 ret = fdt_size;
597 g_free(fdt);
599 out:
600 g_free(pci_map);
602 return ret;
605 typedef struct DeviceTreeParams {
606 PPCE500MachineState *machine;
607 hwaddr addr;
608 hwaddr initrd_base;
609 hwaddr initrd_size;
610 hwaddr kernel_base;
611 hwaddr kernel_size;
612 Notifier notifier;
613 } DeviceTreeParams;
615 static void ppce500_reset_device_tree(void *opaque)
617 DeviceTreeParams *p = opaque;
618 ppce500_load_device_tree(p->machine, p->addr, p->initrd_base,
619 p->initrd_size, p->kernel_base, p->kernel_size,
620 false);
623 static void ppce500_init_notify(Notifier *notifier, void *data)
625 DeviceTreeParams *p = container_of(notifier, DeviceTreeParams, notifier);
626 ppce500_reset_device_tree(p);
629 static int ppce500_prep_device_tree(PPCE500MachineState *machine,
630 hwaddr addr,
631 hwaddr initrd_base,
632 hwaddr initrd_size,
633 hwaddr kernel_base,
634 hwaddr kernel_size)
636 DeviceTreeParams *p = g_new(DeviceTreeParams, 1);
637 p->machine = machine;
638 p->addr = addr;
639 p->initrd_base = initrd_base;
640 p->initrd_size = initrd_size;
641 p->kernel_base = kernel_base;
642 p->kernel_size = kernel_size;
644 qemu_register_reset(ppce500_reset_device_tree, p);
645 p->notifier.notify = ppce500_init_notify;
646 qemu_add_machine_init_done_notifier(&p->notifier);
648 /* Issue the device tree loader once, so that we get the size of the blob */
649 return ppce500_load_device_tree(machine, addr, initrd_base, initrd_size,
650 kernel_base, kernel_size, true);
653 /* Create -kernel TLB entries for BookE. */
654 hwaddr booke206_page_size_to_tlb(uint64_t size)
656 return 63 - clz64(size / KiB);
659 static int booke206_initial_map_tsize(CPUPPCState *env)
661 struct boot_info *bi = env->load_info;
662 hwaddr dt_end;
663 int ps;
665 /* Our initial TLB entry needs to cover everything from 0 to
666 the device tree top */
667 dt_end = bi->dt_base + bi->dt_size;
668 ps = booke206_page_size_to_tlb(dt_end) + 1;
669 if (ps & 1) {
670 /* e500v2 can only do even TLB size bits */
671 ps++;
673 return ps;
676 static uint64_t mmubooke_initial_mapsize(CPUPPCState *env)
678 int tsize;
680 tsize = booke206_initial_map_tsize(env);
681 return (1ULL << 10 << tsize);
684 static void mmubooke_create_initial_mapping(CPUPPCState *env)
686 ppcmas_tlb_t *tlb = booke206_get_tlbm(env, 1, 0, 0);
687 hwaddr size;
688 int ps;
690 ps = booke206_initial_map_tsize(env);
691 size = (ps << MAS1_TSIZE_SHIFT);
692 tlb->mas1 = MAS1_VALID | size;
693 tlb->mas2 = 0;
694 tlb->mas7_3 = 0;
695 tlb->mas7_3 |= MAS3_UR | MAS3_UW | MAS3_UX | MAS3_SR | MAS3_SW | MAS3_SX;
697 env->tlb_dirty = true;
700 static void ppce500_cpu_reset_sec(void *opaque)
702 PowerPCCPU *cpu = opaque;
703 CPUState *cs = CPU(cpu);
705 cpu_reset(cs);
707 cs->exception_index = EXCP_HLT;
710 static void ppce500_cpu_reset(void *opaque)
712 PowerPCCPU *cpu = opaque;
713 CPUState *cs = CPU(cpu);
714 CPUPPCState *env = &cpu->env;
715 struct boot_info *bi = env->load_info;
717 cpu_reset(cs);
719 /* Set initial guest state. */
720 cs->halted = 0;
721 env->gpr[1] = (16 * MiB) - 8;
722 env->gpr[3] = bi->dt_base;
723 env->gpr[4] = 0;
724 env->gpr[5] = 0;
725 env->gpr[6] = EPAPR_MAGIC;
726 env->gpr[7] = mmubooke_initial_mapsize(env);
727 env->gpr[8] = 0;
728 env->gpr[9] = 0;
729 env->nip = bi->entry;
730 mmubooke_create_initial_mapping(env);
733 static DeviceState *ppce500_init_mpic_qemu(PPCE500MachineState *pms,
734 IrqLines *irqs)
736 DeviceState *dev;
737 SysBusDevice *s;
738 int i, j, k;
739 MachineState *machine = MACHINE(pms);
740 unsigned int smp_cpus = machine->smp.cpus;
741 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms);
743 dev = qdev_new(TYPE_OPENPIC);
744 object_property_add_child(OBJECT(machine), "pic", OBJECT(dev));
745 qdev_prop_set_uint32(dev, "model", pmc->mpic_version);
746 qdev_prop_set_uint32(dev, "nb_cpus", smp_cpus);
748 s = SYS_BUS_DEVICE(dev);
749 sysbus_realize_and_unref(s, &error_fatal);
751 k = 0;
752 for (i = 0; i < smp_cpus; i++) {
753 for (j = 0; j < OPENPIC_OUTPUT_NB; j++) {
754 sysbus_connect_irq(s, k++, irqs[i].irq[j]);
758 return dev;
761 static DeviceState *ppce500_init_mpic_kvm(const PPCE500MachineClass *pmc,
762 IrqLines *irqs, Error **errp)
764 DeviceState *dev;
765 CPUState *cs;
767 dev = qdev_new(TYPE_KVM_OPENPIC);
768 qdev_prop_set_uint32(dev, "model", pmc->mpic_version);
770 if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp)) {
771 object_unparent(OBJECT(dev));
772 return NULL;
775 CPU_FOREACH(cs) {
776 if (kvm_openpic_connect_vcpu(dev, cs)) {
777 fprintf(stderr, "%s: failed to connect vcpu to irqchip\n",
778 __func__);
779 abort();
783 return dev;
786 static DeviceState *ppce500_init_mpic(PPCE500MachineState *pms,
787 MemoryRegion *ccsr,
788 IrqLines *irqs)
790 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms);
791 DeviceState *dev = NULL;
792 SysBusDevice *s;
794 if (kvm_enabled()) {
795 Error *err = NULL;
797 if (kvm_kernel_irqchip_allowed()) {
798 dev = ppce500_init_mpic_kvm(pmc, irqs, &err);
800 if (kvm_kernel_irqchip_required() && !dev) {
801 error_reportf_err(err,
802 "kernel_irqchip requested but unavailable: ");
803 exit(1);
807 if (!dev) {
808 dev = ppce500_init_mpic_qemu(pms, irqs);
811 s = SYS_BUS_DEVICE(dev);
812 memory_region_add_subregion(ccsr, MPC8544_MPIC_REGS_OFFSET,
813 s->mmio[0].memory);
815 return dev;
818 static void ppce500_power_off(void *opaque, int line, int on)
820 if (on) {
821 qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
825 void ppce500_init(MachineState *machine)
827 MemoryRegion *address_space_mem = get_system_memory();
828 PPCE500MachineState *pms = PPCE500_MACHINE(machine);
829 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(machine);
830 PCIBus *pci_bus;
831 CPUPPCState *env = NULL;
832 uint64_t loadaddr;
833 hwaddr kernel_base = -1LL;
834 int kernel_size = 0;
835 hwaddr dt_base = 0;
836 hwaddr initrd_base = 0;
837 int initrd_size = 0;
838 hwaddr cur_base = 0;
839 char *filename;
840 const char *payload_name;
841 bool kernel_as_payload;
842 hwaddr bios_entry = 0;
843 target_long payload_size;
844 struct boot_info *boot_info;
845 int dt_size;
846 int i;
847 unsigned int smp_cpus = machine->smp.cpus;
848 /* irq num for pin INTA, INTB, INTC and INTD is 1, 2, 3 and
849 * 4 respectively */
850 unsigned int pci_irq_nrs[PCI_NUM_PINS] = {1, 2, 3, 4};
851 IrqLines *irqs;
852 DeviceState *dev, *mpicdev;
853 CPUPPCState *firstenv = NULL;
854 MemoryRegion *ccsr_addr_space;
855 SysBusDevice *s;
856 PPCE500CCSRState *ccsr;
857 I2CBus *i2c;
859 irqs = g_new0(IrqLines, smp_cpus);
860 for (i = 0; i < smp_cpus; i++) {
861 PowerPCCPU *cpu;
862 CPUState *cs;
863 qemu_irq *input;
865 cpu = POWERPC_CPU(object_new(machine->cpu_type));
866 env = &cpu->env;
867 cs = CPU(cpu);
869 if (env->mmu_model != POWERPC_MMU_BOOKE206) {
870 error_report("MMU model %i not supported by this machine",
871 env->mmu_model);
872 exit(1);
876 * Secondary CPU starts in halted state for now. Needs to change
877 * when implementing non-kernel boot.
879 object_property_set_bool(OBJECT(cs), "start-powered-off", i != 0,
880 &error_fatal);
881 qdev_realize_and_unref(DEVICE(cs), NULL, &error_fatal);
883 if (!firstenv) {
884 firstenv = env;
887 input = (qemu_irq *)env->irq_inputs;
888 irqs[i].irq[OPENPIC_OUTPUT_INT] = input[PPCE500_INPUT_INT];
889 irqs[i].irq[OPENPIC_OUTPUT_CINT] = input[PPCE500_INPUT_CINT];
890 env->spr_cb[SPR_BOOKE_PIR].default_value = cs->cpu_index = i;
891 env->mpic_iack = pmc->ccsrbar_base + MPC8544_MPIC_REGS_OFFSET + 0xa0;
893 ppc_booke_timers_init(cpu, 400000000, PPC_TIMER_E500);
895 /* Register reset handler */
896 if (!i) {
897 /* Primary CPU */
898 struct boot_info *boot_info;
899 boot_info = g_malloc0(sizeof(struct boot_info));
900 qemu_register_reset(ppce500_cpu_reset, cpu);
901 env->load_info = boot_info;
902 } else {
903 /* Secondary CPUs */
904 qemu_register_reset(ppce500_cpu_reset_sec, cpu);
908 env = firstenv;
910 if (!QEMU_IS_ALIGNED(machine->ram_size, RAM_SIZES_ALIGN)) {
911 error_report("RAM size must be multiple of %" PRIu64, RAM_SIZES_ALIGN);
912 exit(EXIT_FAILURE);
915 /* Register Memory */
916 memory_region_add_subregion(address_space_mem, 0, machine->ram);
918 dev = qdev_new("e500-ccsr");
919 object_property_add_child(qdev_get_machine(), "e500-ccsr",
920 OBJECT(dev));
921 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
922 ccsr = CCSR(dev);
923 ccsr_addr_space = &ccsr->ccsr_space;
924 memory_region_add_subregion(address_space_mem, pmc->ccsrbar_base,
925 ccsr_addr_space);
927 mpicdev = ppce500_init_mpic(pms, ccsr_addr_space, irqs);
928 g_free(irqs);
930 /* Serial */
931 if (serial_hd(0)) {
932 serial_mm_init(ccsr_addr_space, MPC8544_SERIAL0_REGS_OFFSET,
933 0, qdev_get_gpio_in(mpicdev, 42), 399193,
934 serial_hd(0), DEVICE_BIG_ENDIAN);
937 if (serial_hd(1)) {
938 serial_mm_init(ccsr_addr_space, MPC8544_SERIAL1_REGS_OFFSET,
939 0, qdev_get_gpio_in(mpicdev, 42), 399193,
940 serial_hd(1), DEVICE_BIG_ENDIAN);
942 /* I2C */
943 dev = qdev_new("mpc-i2c");
944 s = SYS_BUS_DEVICE(dev);
945 sysbus_realize_and_unref(s, &error_fatal);
946 sysbus_connect_irq(s, 0, qdev_get_gpio_in(mpicdev, MPC8544_I2C_IRQ));
947 memory_region_add_subregion(ccsr_addr_space, MPC8544_I2C_REGS_OFFSET,
948 sysbus_mmio_get_region(s, 0));
949 i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c");
950 i2c_slave_create_simple(i2c, "ds1338", RTC_REGS_OFFSET);
953 /* General Utility device */
954 dev = qdev_new("mpc8544-guts");
955 s = SYS_BUS_DEVICE(dev);
956 sysbus_realize_and_unref(s, &error_fatal);
957 memory_region_add_subregion(ccsr_addr_space, MPC8544_UTIL_OFFSET,
958 sysbus_mmio_get_region(s, 0));
960 /* PCI */
961 dev = qdev_new("e500-pcihost");
962 object_property_add_child(qdev_get_machine(), "pci-host", OBJECT(dev));
963 qdev_prop_set_uint32(dev, "first_slot", pmc->pci_first_slot);
964 qdev_prop_set_uint32(dev, "first_pin_irq", pci_irq_nrs[0]);
965 s = SYS_BUS_DEVICE(dev);
966 sysbus_realize_and_unref(s, &error_fatal);
967 for (i = 0; i < PCI_NUM_PINS; i++) {
968 sysbus_connect_irq(s, i, qdev_get_gpio_in(mpicdev, pci_irq_nrs[i]));
971 memory_region_add_subregion(ccsr_addr_space, MPC8544_PCI_REGS_OFFSET,
972 sysbus_mmio_get_region(s, 0));
974 pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
975 if (!pci_bus)
976 printf("couldn't create PCI controller!\n");
978 if (pci_bus) {
979 /* Register network interfaces. */
980 for (i = 0; i < nb_nics; i++) {
981 pci_nic_init_nofail(&nd_table[i], pci_bus, "virtio-net-pci", NULL);
985 /* Register spinning region */
986 sysbus_create_simple("e500-spin", pmc->spin_base, NULL);
988 if (pmc->has_mpc8xxx_gpio) {
989 qemu_irq poweroff_irq;
991 dev = qdev_new("mpc8xxx_gpio");
992 s = SYS_BUS_DEVICE(dev);
993 sysbus_realize_and_unref(s, &error_fatal);
994 sysbus_connect_irq(s, 0, qdev_get_gpio_in(mpicdev, MPC8XXX_GPIO_IRQ));
995 memory_region_add_subregion(ccsr_addr_space, MPC8XXX_GPIO_OFFSET,
996 sysbus_mmio_get_region(s, 0));
998 /* Power Off GPIO at Pin 0 */
999 poweroff_irq = qemu_allocate_irq(ppce500_power_off, NULL, 0);
1000 qdev_connect_gpio_out(dev, 0, poweroff_irq);
1003 /* Platform Bus Device */
1004 if (pmc->has_platform_bus) {
1005 dev = qdev_new(TYPE_PLATFORM_BUS_DEVICE);
1006 dev->id = TYPE_PLATFORM_BUS_DEVICE;
1007 qdev_prop_set_uint32(dev, "num_irqs", pmc->platform_bus_num_irqs);
1008 qdev_prop_set_uint32(dev, "mmio_size", pmc->platform_bus_size);
1009 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
1010 pms->pbus_dev = PLATFORM_BUS_DEVICE(dev);
1012 s = SYS_BUS_DEVICE(pms->pbus_dev);
1013 for (i = 0; i < pmc->platform_bus_num_irqs; i++) {
1014 int irqn = pmc->platform_bus_first_irq + i;
1015 sysbus_connect_irq(s, i, qdev_get_gpio_in(mpicdev, irqn));
1018 memory_region_add_subregion(address_space_mem,
1019 pmc->platform_bus_base,
1020 sysbus_mmio_get_region(s, 0));
1024 * Smart firmware defaults ahead!
1026 * We follow the following table to select which payload we execute.
1028 * -kernel | -bios | payload
1029 * ---------+-------+---------
1030 * N | Y | u-boot
1031 * N | N | u-boot
1032 * Y | Y | u-boot
1033 * Y | N | kernel
1035 * This ensures backwards compatibility with how we used to expose
1036 * -kernel to users but allows them to run through u-boot as well.
1038 kernel_as_payload = false;
1039 if (machine->firmware == NULL) {
1040 if (machine->kernel_filename) {
1041 payload_name = machine->kernel_filename;
1042 kernel_as_payload = true;
1043 } else {
1044 payload_name = "u-boot.e500";
1046 } else {
1047 payload_name = machine->firmware;
1050 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, payload_name);
1051 if (!filename) {
1052 error_report("could not find firmware/kernel file '%s'", payload_name);
1053 exit(1);
1056 payload_size = load_elf(filename, NULL, NULL, NULL,
1057 &bios_entry, &loadaddr, NULL, NULL,
1058 1, PPC_ELF_MACHINE, 0, 0);
1059 if (payload_size < 0) {
1061 * Hrm. No ELF image? Try a uImage, maybe someone is giving us an
1062 * ePAPR compliant kernel
1064 loadaddr = LOAD_UIMAGE_LOADADDR_INVALID;
1065 payload_size = load_uimage(filename, &bios_entry, &loadaddr, NULL,
1066 NULL, NULL);
1067 if (payload_size < 0) {
1068 error_report("could not load firmware '%s'", filename);
1069 exit(1);
1073 g_free(filename);
1075 if (kernel_as_payload) {
1076 kernel_base = loadaddr;
1077 kernel_size = payload_size;
1080 cur_base = loadaddr + payload_size;
1081 if (cur_base < 32 * MiB) {
1082 /* u-boot occupies memory up to 32MB, so load blobs above */
1083 cur_base = 32 * MiB;
1086 /* Load bare kernel only if no bios/u-boot has been provided */
1087 if (machine->kernel_filename && !kernel_as_payload) {
1088 kernel_base = cur_base;
1089 kernel_size = load_image_targphys(machine->kernel_filename,
1090 cur_base,
1091 machine->ram_size - cur_base);
1092 if (kernel_size < 0) {
1093 error_report("could not load kernel '%s'",
1094 machine->kernel_filename);
1095 exit(1);
1098 cur_base += kernel_size;
1101 /* Load initrd. */
1102 if (machine->initrd_filename) {
1103 initrd_base = (cur_base + INITRD_LOAD_PAD) & ~INITRD_PAD_MASK;
1104 initrd_size = load_image_targphys(machine->initrd_filename, initrd_base,
1105 machine->ram_size - initrd_base);
1107 if (initrd_size < 0) {
1108 error_report("could not load initial ram disk '%s'",
1109 machine->initrd_filename);
1110 exit(1);
1113 cur_base = initrd_base + initrd_size;
1117 * Reserve space for dtb behind the kernel image because Linux has a bug
1118 * where it can only handle the dtb if it's within the first 64MB of where
1119 * <kernel> starts. dtb cannot not reach initrd_base because INITRD_LOAD_PAD
1120 * ensures enough space between kernel and initrd.
1122 dt_base = (loadaddr + payload_size + DTC_LOAD_PAD) & ~DTC_PAD_MASK;
1123 if (dt_base + DTB_MAX_SIZE > machine->ram_size) {
1124 error_report("not enough memory for device tree");
1125 exit(1);
1128 dt_size = ppce500_prep_device_tree(pms, dt_base,
1129 initrd_base, initrd_size,
1130 kernel_base, kernel_size);
1131 if (dt_size < 0) {
1132 error_report("couldn't load device tree");
1133 exit(1);
1135 assert(dt_size < DTB_MAX_SIZE);
1137 boot_info = env->load_info;
1138 boot_info->entry = bios_entry;
1139 boot_info->dt_base = dt_base;
1140 boot_info->dt_size = dt_size;
1143 static void e500_ccsr_initfn(Object *obj)
1145 PPCE500CCSRState *ccsr = CCSR(obj);
1146 memory_region_init(&ccsr->ccsr_space, obj, "e500-ccsr",
1147 MPC8544_CCSRBAR_SIZE);
1150 static const TypeInfo e500_ccsr_info = {
1151 .name = TYPE_CCSR,
1152 .parent = TYPE_SYS_BUS_DEVICE,
1153 .instance_size = sizeof(PPCE500CCSRState),
1154 .instance_init = e500_ccsr_initfn,
1157 static const TypeInfo ppce500_info = {
1158 .name = TYPE_PPCE500_MACHINE,
1159 .parent = TYPE_MACHINE,
1160 .abstract = true,
1161 .instance_size = sizeof(PPCE500MachineState),
1162 .class_size = sizeof(PPCE500MachineClass),
1165 static void e500_register_types(void)
1167 type_register_static(&e500_ccsr_info);
1168 type_register_static(&ppce500_info);
1171 type_init(e500_register_types)