hw/display/pl110.c

   1 /*
   2  * Arm PrimeCell PL110 Color LCD Controller
   3  *
   4  * Copyright (c) 2005-2009 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the GNU LGPL
   8  */
   9
  10 #include "qemu/osdep.h"
  11 #include "hw/sysbus.h"
  12 #include "ui/console.h"
  13 #include "framebuffer.h"
  14 #include "ui/pixel_ops.h"
  15 #include "qemu/log.h"
  16
  17 #define PL110_CR_EN   0x001
  18 #define PL110_CR_BGR  0x100
  19 #define PL110_CR_BEBO 0x200
  20 #define PL110_CR_BEPO 0x400
  21 #define PL110_CR_PWR  0x800
  22
  23 enum pl110_bppmode
  24 {
  25     BPP_1,
  26     BPP_2,
  27     BPP_4,
  28     BPP_8,
  29     BPP_16,
  30     BPP_32,
  31     BPP_16_565, /* PL111 only */
  32     BPP_12      /* PL111 only */
  33 };
  34
  35
  36 /* The Versatile/PB uses a slightly modified PL110 controller.  */
  37 enum pl110_version
  38 {
  39     PL110,
  40     PL110_VERSATILE,
  41     PL111
  42 };
  43
  44 #define TYPE_PL110 "pl110"
  45 #define PL110(obj) OBJECT_CHECK(PL110State, (obj), TYPE_PL110)
  46
  47 typedef struct PL110State {
  48     SysBusDevice parent_obj;
  49
  50     MemoryRegion iomem;
  51     MemoryRegionSection fbsection;
  52     QemuConsole *con;
  53
  54     int version;
  55     uint32_t timing[4];
  56     uint32_t cr;
  57     uint32_t upbase;
  58     uint32_t lpbase;
  59     uint32_t int_status;
  60     uint32_t int_mask;
  61     int cols;
  62     int rows;
  63     enum pl110_bppmode bpp;
  64     int invalidate;
  65     uint32_t mux_ctrl;
  66     uint32_t palette[256];
  67     uint32_t raw_palette[128];
  68     qemu_irq irq;
  69 } PL110State;
  70
  71 static int vmstate_pl110_post_load(void *opaque, int version_id);
  72
  73 static const VMStateDescription vmstate_pl110 = {
  74     .name = "pl110",
  75     .version_id = 2,
  76     .minimum_version_id = 1,
  77     .post_load = vmstate_pl110_post_load,
  78     .fields = (VMStateField[]) {
  79         VMSTATE_INT32(version, PL110State),
  80         VMSTATE_UINT32_ARRAY(timing, PL110State, 4),
  81         VMSTATE_UINT32(cr, PL110State),
  82         VMSTATE_UINT32(upbase, PL110State),
  83         VMSTATE_UINT32(lpbase, PL110State),
  84         VMSTATE_UINT32(int_status, PL110State),
  85         VMSTATE_UINT32(int_mask, PL110State),
  86         VMSTATE_INT32(cols, PL110State),
  87         VMSTATE_INT32(rows, PL110State),
  88         VMSTATE_UINT32(bpp, PL110State),
  89         VMSTATE_INT32(invalidate, PL110State),
  90         VMSTATE_UINT32_ARRAY(palette, PL110State, 256),
  91         VMSTATE_UINT32_ARRAY(raw_palette, PL110State, 128),
  92         VMSTATE_UINT32_V(mux_ctrl, PL110State, 2),
  93         VMSTATE_END_OF_LIST()
  94     }
  95 };
  96
  97 static const unsigned char pl110_id[] =
  98 { 0x10, 0x11, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
  99
 100 static const unsigned char pl111_id[] = {
 101     0x11, 0x11, 0x24, 0x00, 0x0d, 0xf0, 0x05, 0xb1
 102 };
 103
 104
 105 /* Indexed by pl110_version */
 106 static const unsigned char *idregs[] = {
 107     pl110_id,
 108     /* The ARM documentation (DDI0224C) says the CLCDC on the Versatile board
 109      * has a different ID (0x93, 0x10, 0x04, 0x00, ...). However the hardware
 110      * itself has the same ID values as a stock PL110, and guests (in
 111      * particular Linux) rely on this. We emulate what the hardware does,
 112      * rather than what the docs claim it ought to do.
 113      */
 114     pl110_id,
 115     pl111_id
 116 };
 117
 118 #define BITS 8
 119 #include "pl110_template.h"
 120 #define BITS 15
 121 #include "pl110_template.h"
 122 #define BITS 16
 123 #include "pl110_template.h"
 124 #define BITS 24
 125 #include "pl110_template.h"
 126 #define BITS 32
 127 #include "pl110_template.h"
 128
 129 static int pl110_enabled(PL110State *s)
 130 {
 131   return (s->cr & PL110_CR_EN) && (s->cr & PL110_CR_PWR);
 132 }
 133
 134 static void pl110_update_display(void *opaque)
 135 {
 136     PL110State *s = (PL110State *)opaque;
 137     SysBusDevice *sbd;
 138     DisplaySurface *surface = qemu_console_surface(s->con);
 139     drawfn* fntable;
 140     drawfn fn;
 141     int dest_width;
 142     int src_width;
 143     int bpp_offset;
 144     int first;
 145     int last;
 146
 147     if (!pl110_enabled(s)) {
 148         return;
 149     }
 150
 151     sbd = SYS_BUS_DEVICE(s);
 152
 153     switch (surface_bits_per_pixel(surface)) {
 154     case 0:
 155         return;
 156     case 8:
 157         fntable = pl110_draw_fn_8;
 158         dest_width = 1;
 159         break;
 160     case 15:
 161         fntable = pl110_draw_fn_15;
 162         dest_width = 2;
 163         break;
 164     case 16:
 165         fntable = pl110_draw_fn_16;
 166         dest_width = 2;
 167         break;
 168     case 24:
 169         fntable = pl110_draw_fn_24;
 170         dest_width = 3;
 171         break;
 172     case 32:
 173         fntable = pl110_draw_fn_32;
 174         dest_width = 4;
 175         break;
 176     default:
 177         fprintf(stderr, "pl110: Bad color depth\n");
 178         exit(1);
 179     }
 180     if (s->cr & PL110_CR_BGR)
 181         bpp_offset = 0;
 182     else
 183         bpp_offset = 24;
 184
 185     if ((s->version != PL111) && (s->bpp == BPP_16)) {
 186         /* The PL110's native 16 bit mode is 5551; however
 187          * most boards with a PL110 implement an external
 188          * mux which allows bits to be reshuffled to give
 189          * 565 format. The mux is typically controlled by
 190          * an external system register.
 191          * This is controlled by a GPIO input pin
 192          * so boards can wire it up to their register.
 193          *
 194          * The PL111 straightforwardly implements both
 195          * 5551 and 565 under control of the bpp field
 196          * in the LCDControl register.
 197          */
 198         switch (s->mux_ctrl) {
 199         case 3: /* 565 BGR */
 200             bpp_offset = (BPP_16_565 - BPP_16);
 201             break;
 202         case 1: /* 5551 */
 203             break;
 204         case 0: /* 888; also if we have loaded vmstate from an old version */
 205         case 2: /* 565 RGB */
 206         default:
 207             /* treat as 565 but honour BGR bit */
 208             bpp_offset += (BPP_16_565 - BPP_16);
 209             break;
 210         }
 211     }
 212
 213     if (s->cr & PL110_CR_BEBO)
 214         fn = fntable[s->bpp + 8 + bpp_offset];
 215     else if (s->cr & PL110_CR_BEPO)
 216         fn = fntable[s->bpp + 16 + bpp_offset];
 217     else
 218         fn = fntable[s->bpp + bpp_offset];
 219
 220     src_width = s->cols;
 221     switch (s->bpp) {
 222     case BPP_1:
 223         src_width >>= 3;
 224         break;
 225     case BPP_2:
 226         src_width >>= 2;
 227         break;
 228     case BPP_4:
 229         src_width >>= 1;
 230         break;
 231     case BPP_8:
 232         break;
 233     case BPP_16:
 234     case BPP_16_565:
 235     case BPP_12:
 236         src_width <<= 1;
 237         break;
 238     case BPP_32:
 239         src_width <<= 2;
 240         break;
 241     }
 242     dest_width *= s->cols;
 243     first = 0;
 244     if (s->invalidate) {
 245         framebuffer_update_memory_section(&s->fbsection,
 246                                           sysbus_address_space(sbd),
 247                                           s->upbase,
 248                                           s->rows, src_width);
 249     }
 250
 251     framebuffer_update_display(surface, &s->fbsection,
 252                                s->cols, s->rows,
 253                                src_width, dest_width, 0,
 254                                s->invalidate,
 255                                fn, s->palette,
 256                                &first, &last);
 257
 258     if (first >= 0) {
 259         dpy_gfx_update(s->con, 0, first, s->cols, last - first + 1);
 260     }
 261     s->invalidate = 0;
 262 }
 263
 264 static void pl110_invalidate_display(void * opaque)
 265 {
 266     PL110State *s = (PL110State *)opaque;
 267     s->invalidate = 1;
 268     if (pl110_enabled(s)) {
 269         qemu_console_resize(s->con, s->cols, s->rows);
 270     }
 271 }
 272
 273 static void pl110_update_palette(PL110State *s, int n)
 274 {
 275     DisplaySurface *surface = qemu_console_surface(s->con);
 276     int i;
 277     uint32_t raw;
 278     unsigned int r, g, b;
 279
 280     raw = s->raw_palette[n];
 281     n <<= 1;
 282     for (i = 0; i < 2; i++) {
 283         r = (raw & 0x1f) << 3;
 284         raw >>= 5;
 285         g = (raw & 0x1f) << 3;
 286         raw >>= 5;
 287         b = (raw & 0x1f) << 3;
 288         /* The I bit is ignored.  */
 289         raw >>= 6;
 290         switch (surface_bits_per_pixel(surface)) {
 291         case 8:
 292             s->palette[n] = rgb_to_pixel8(r, g, b);
 293             break;
 294         case 15:
 295             s->palette[n] = rgb_to_pixel15(r, g, b);
 296             break;
 297         case 16:
 298             s->palette[n] = rgb_to_pixel16(r, g, b);
 299             break;
 300         case 24:
 301         case 32:
 302             s->palette[n] = rgb_to_pixel32(r, g, b);
 303             break;
 304         }
 305         n++;
 306     }
 307 }
 308
 309 static void pl110_resize(PL110State *s, int width, int height)
 310 {
 311     if (width != s->cols || height != s->rows) {
 312         if (pl110_enabled(s)) {
 313             qemu_console_resize(s->con, width, height);
 314         }
 315     }
 316     s->cols = width;
 317     s->rows = height;
 318 }
 319
 320 /* Update interrupts.  */
 321 static void pl110_update(PL110State *s)
 322 {
 323   /* TODO: Implement interrupts.  */
 324 }
 325
 326 static uint64_t pl110_read(void *opaque, hwaddr offset,
 327                            unsigned size)
 328 {
 329     PL110State *s = (PL110State *)opaque;
 330
 331     if (offset >= 0xfe0 && offset < 0x1000) {
 332         return idregs[s->version][(offset - 0xfe0) >> 2];
 333     }
 334     if (offset >= 0x200 && offset < 0x400) {
 335         return s->raw_palette[(offset - 0x200) >> 2];
 336     }
 337     switch (offset >> 2) {
 338     case 0: /* LCDTiming0 */
 339         return s->timing[0];
 340     case 1: /* LCDTiming1 */
 341         return s->timing[1];
 342     case 2: /* LCDTiming2 */
 343         return s->timing[2];
 344     case 3: /* LCDTiming3 */
 345         return s->timing[3];
 346     case 4: /* LCDUPBASE */
 347         return s->upbase;
 348     case 5: /* LCDLPBASE */
 349         return s->lpbase;
 350     case 6: /* LCDIMSC */
 351         if (s->version != PL110) {
 352             return s->cr;
 353         }
 354         return s->int_mask;
 355     case 7: /* LCDControl */
 356         if (s->version != PL110) {
 357             return s->int_mask;
 358         }
 359         return s->cr;
 360     case 8: /* LCDRIS */
 361         return s->int_status;
 362     case 9: /* LCDMIS */
 363         return s->int_status & s->int_mask;
 364     case 11: /* LCDUPCURR */
 365         /* TODO: Implement vertical refresh.  */
 366         return s->upbase;
 367     case 12: /* LCDLPCURR */
 368         return s->lpbase;
 369     default:
 370         qemu_log_mask(LOG_GUEST_ERROR,
 371                       "pl110_read: Bad offset %x\n", (int)offset);
 372         return 0;
 373     }
 374 }
 375
 376 static void pl110_write(void *opaque, hwaddr offset,
 377                         uint64_t val, unsigned size)
 378 {
 379     PL110State *s = (PL110State *)opaque;
 380     int n;
 381
 382     /* For simplicity invalidate the display whenever a control register
 383        is written to.  */
 384     s->invalidate = 1;
 385     if (offset >= 0x200 && offset < 0x400) {
 386         /* Palette.  */
 387         n = (offset - 0x200) >> 2;
 388         s->raw_palette[(offset - 0x200) >> 2] = val;
 389         pl110_update_palette(s, n);
 390         return;
 391     }
 392     switch (offset >> 2) {
 393     case 0: /* LCDTiming0 */
 394         s->timing[0] = val;
 395         n = ((val & 0xfc) + 4) * 4;
 396         pl110_resize(s, n, s->rows);
 397         break;
 398     case 1: /* LCDTiming1 */
 399         s->timing[1] = val;
 400         n = (val & 0x3ff) + 1;
 401         pl110_resize(s, s->cols, n);
 402         break;
 403     case 2: /* LCDTiming2 */
 404         s->timing[2] = val;
 405         break;
 406     case 3: /* LCDTiming3 */
 407         s->timing[3] = val;
 408         break;
 409     case 4: /* LCDUPBASE */
 410         s->upbase = val;
 411         break;
 412     case 5: /* LCDLPBASE */
 413         s->lpbase = val;
 414         break;
 415     case 6: /* LCDIMSC */
 416         if (s->version != PL110) {
 417             goto control;
 418         }
 419     imsc:
 420         s->int_mask = val;
 421         pl110_update(s);
 422         break;
 423     case 7: /* LCDControl */
 424         if (s->version != PL110) {
 425             goto imsc;
 426         }
 427     control:
 428         s->cr = val;
 429         s->bpp = (val >> 1) & 7;
 430         if (pl110_enabled(s)) {
 431             qemu_console_resize(s->con, s->cols, s->rows);
 432         }
 433         break;
 434     case 10: /* LCDICR */
 435         s->int_status &= ~val;
 436         pl110_update(s);
 437         break;
 438     default:
 439         qemu_log_mask(LOG_GUEST_ERROR,
 440                       "pl110_write: Bad offset %x\n", (int)offset);
 441     }
 442 }
 443
 444 static const MemoryRegionOps pl110_ops = {
 445     .read = pl110_read,
 446     .write = pl110_write,
 447     .endianness = DEVICE_NATIVE_ENDIAN,
 448 };
 449
 450 static void pl110_mux_ctrl_set(void *opaque, int line, int level)
 451 {
 452     PL110State *s = (PL110State *)opaque;
 453     s->mux_ctrl = level;
 454 }
 455
 456 static int vmstate_pl110_post_load(void *opaque, int version_id)
 457 {
 458     PL110State *s = opaque;
 459     /* Make sure we redraw, and at the right size */
 460     pl110_invalidate_display(s);
 461     return 0;
 462 }
 463
 464 static const GraphicHwOps pl110_gfx_ops = {
 465     .invalidate  = pl110_invalidate_display,
 466     .gfx_update  = pl110_update_display,
 467 };
 468
 469 static int pl110_initfn(SysBusDevice *sbd)
 470 {
 471     DeviceState *dev = DEVICE(sbd);
 472     PL110State *s = PL110(dev);
 473
 474     memory_region_init_io(&s->iomem, OBJECT(s), &pl110_ops, s, "pl110", 0x1000);
 475     sysbus_init_mmio(sbd, &s->iomem);
 476     sysbus_init_irq(sbd, &s->irq);
 477     qdev_init_gpio_in(dev, pl110_mux_ctrl_set, 1);
 478     s->con = graphic_console_init(dev, 0, &pl110_gfx_ops, s);
 479     return 0;
 480 }
 481
 482 static void pl110_init(Object *obj)
 483 {
 484     PL110State *s = PL110(obj);
 485
 486     s->version = PL110;
 487 }
 488
 489 static void pl110_versatile_init(Object *obj)
 490 {
 491     PL110State *s = PL110(obj);
 492
 493     s->version = PL110_VERSATILE;
 494 }
 495
 496 static void pl111_init(Object *obj)
 497 {
 498     PL110State *s = PL110(obj);
 499
 500     s->version = PL111;
 501 }
 502
 503 static void pl110_class_init(ObjectClass *klass, void *data)
 504 {
 505     DeviceClass *dc = DEVICE_CLASS(klass);
 506     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 507
 508     k->init = pl110_initfn;
 509     set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories);
 510     dc->vmsd = &vmstate_pl110;
 511 }
 512
 513 static const TypeInfo pl110_info = {
 514     .name          = TYPE_PL110,
 515     .parent        = TYPE_SYS_BUS_DEVICE,
 516     .instance_size = sizeof(PL110State),
 517     .instance_init = pl110_init,
 518     .class_init    = pl110_class_init,
 519 };
 520
 521 static const TypeInfo pl110_versatile_info = {
 522     .name          = "pl110_versatile",
 523     .parent        = TYPE_PL110,
 524     .instance_init = pl110_versatile_init,
 525 };
 526
 527 static const TypeInfo pl111_info = {
 528     .name          = "pl111",
 529     .parent        = TYPE_PL110,
 530     .instance_init = pl111_init,
 531 };
 532
 533 static void pl110_register_types(void)
 534 {
 535     type_register_static(&pl110_info);
 536     type_register_static(&pl110_versatile_info);
 537     type_register_static(&pl111_info);
 538 }
 539
 540 type_init(pl110_register_types)