2 * Postcopy migration for RAM
4 * Copyright 2013-2015 Red Hat, Inc. and/or its affiliates
7 * Dave Gilbert <dgilbert@redhat.com>
9 * This work is licensed under the terms of the GNU GPL, version 2 or later.
10 * See the COPYING file in the top-level directory.
15 * Postcopy is a migration technique where the execution flips from the
16 * source to the destination before all the data has been copied.
19 #include "qemu/osdep.h"
20 #include "exec/target_page.h"
21 #include "migration.h"
22 #include "qemu-file.h"
24 #include "postcopy-ram.h"
26 #include "qapi/error.h"
27 #include "qemu/notify.h"
29 #include "sysemu/sysemu.h"
30 #include "qemu/error-report.h"
32 #include "hw/boards.h"
34 /* Arbitrary limit on size of each discard command,
35 * keeps them around ~200 bytes
37 #define MAX_DISCARDS_PER_COMMAND 12
39 struct PostcopyDiscardState
{
40 const char *ramblock_name
;
43 * Start and length of a discard range (bytes)
45 uint64_t start_list
[MAX_DISCARDS_PER_COMMAND
];
46 uint64_t length_list
[MAX_DISCARDS_PER_COMMAND
];
47 unsigned int nsentwords
;
48 unsigned int nsentcmds
;
51 static NotifierWithReturnList postcopy_notifier_list
;
53 void postcopy_infrastructure_init(void)
55 notifier_with_return_list_init(&postcopy_notifier_list
);
58 void postcopy_add_notifier(NotifierWithReturn
*nn
)
60 notifier_with_return_list_add(&postcopy_notifier_list
, nn
);
63 void postcopy_remove_notifier(NotifierWithReturn
*n
)
65 notifier_with_return_remove(n
);
68 int postcopy_notify(enum PostcopyNotifyReason reason
, Error
**errp
)
70 struct PostcopyNotifyData pnd
;
74 return notifier_with_return_list_notify(&postcopy_notifier_list
,
78 /* Postcopy needs to detect accesses to pages that haven't yet been copied
79 * across, and efficiently map new pages in, the techniques for doing this
80 * are target OS specific.
82 #if defined(__linux__)
85 #include <sys/ioctl.h>
86 #include <sys/syscall.h>
87 #include <asm/types.h> /* for __u64 */
90 #if defined(__linux__) && defined(__NR_userfaultfd) && defined(CONFIG_EVENTFD)
91 #include <sys/eventfd.h>
92 #include <linux/userfaultfd.h>
94 typedef struct PostcopyBlocktimeContext
{
95 /* time when page fault initiated per vCPU */
96 uint32_t *page_fault_vcpu_time
;
97 /* page address per vCPU */
99 uint32_t total_blocktime
;
100 /* blocktime per vCPU */
101 uint32_t *vcpu_blocktime
;
102 /* point in time when last page fault was initiated */
104 /* number of vCPU are suspended */
109 * Handler for exit event, necessary for
110 * releasing whole blocktime_ctx
112 Notifier exit_notifier
;
113 } PostcopyBlocktimeContext
;
115 static void destroy_blocktime_context(struct PostcopyBlocktimeContext
*ctx
)
117 g_free(ctx
->page_fault_vcpu_time
);
118 g_free(ctx
->vcpu_addr
);
119 g_free(ctx
->vcpu_blocktime
);
123 static void migration_exit_cb(Notifier
*n
, void *data
)
125 PostcopyBlocktimeContext
*ctx
= container_of(n
, PostcopyBlocktimeContext
,
127 destroy_blocktime_context(ctx
);
130 static struct PostcopyBlocktimeContext
*blocktime_context_new(void)
132 MachineState
*ms
= MACHINE(qdev_get_machine());
133 unsigned int smp_cpus
= ms
->smp
.cpus
;
134 PostcopyBlocktimeContext
*ctx
= g_new0(PostcopyBlocktimeContext
, 1);
135 ctx
->page_fault_vcpu_time
= g_new0(uint32_t, smp_cpus
);
136 ctx
->vcpu_addr
= g_new0(uintptr_t, smp_cpus
);
137 ctx
->vcpu_blocktime
= g_new0(uint32_t, smp_cpus
);
139 ctx
->exit_notifier
.notify
= migration_exit_cb
;
140 ctx
->start_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
141 qemu_add_exit_notifier(&ctx
->exit_notifier
);
145 static uint32List
*get_vcpu_blocktime_list(PostcopyBlocktimeContext
*ctx
)
147 MachineState
*ms
= MACHINE(qdev_get_machine());
148 uint32List
*list
= NULL
, *entry
= NULL
;
151 for (i
= ms
->smp
.cpus
- 1; i
>= 0; i
--) {
152 entry
= g_new0(uint32List
, 1);
153 entry
->value
= ctx
->vcpu_blocktime
[i
];
162 * This function just populates MigrationInfo from postcopy's
163 * blocktime context. It will not populate MigrationInfo,
164 * unless postcopy-blocktime capability was set.
166 * @info: pointer to MigrationInfo to populate
168 void fill_destination_postcopy_migration_info(MigrationInfo
*info
)
170 MigrationIncomingState
*mis
= migration_incoming_get_current();
171 PostcopyBlocktimeContext
*bc
= mis
->blocktime_ctx
;
177 info
->has_postcopy_blocktime
= true;
178 info
->postcopy_blocktime
= bc
->total_blocktime
;
179 info
->has_postcopy_vcpu_blocktime
= true;
180 info
->postcopy_vcpu_blocktime
= get_vcpu_blocktime_list(bc
);
183 static uint32_t get_postcopy_total_blocktime(void)
185 MigrationIncomingState
*mis
= migration_incoming_get_current();
186 PostcopyBlocktimeContext
*bc
= mis
->blocktime_ctx
;
192 return bc
->total_blocktime
;
196 * receive_ufd_features: check userfault fd features, to request only supported
197 * features in the future.
199 * Returns: true on success
201 * __NR_userfaultfd - should be checked before
202 * @features: out parameter will contain uffdio_api.features provided by kernel
205 static bool receive_ufd_features(uint64_t *features
)
207 struct uffdio_api api_struct
= {0};
211 /* if we are here __NR_userfaultfd should exists */
212 ufd
= syscall(__NR_userfaultfd
, O_CLOEXEC
);
214 error_report("%s: syscall __NR_userfaultfd failed: %s", __func__
,
220 api_struct
.api
= UFFD_API
;
221 api_struct
.features
= 0;
222 if (ioctl(ufd
, UFFDIO_API
, &api_struct
)) {
223 error_report("%s: UFFDIO_API failed: %s", __func__
,
229 *features
= api_struct
.features
;
237 * request_ufd_features: this function should be called only once on a newly
238 * opened ufd, subsequent calls will lead to error.
240 * Returns: true on success
242 * @ufd: fd obtained from userfaultfd syscall
243 * @features: bit mask see UFFD_API_FEATURES
245 static bool request_ufd_features(int ufd
, uint64_t features
)
247 struct uffdio_api api_struct
= {0};
250 api_struct
.api
= UFFD_API
;
251 api_struct
.features
= features
;
252 if (ioctl(ufd
, UFFDIO_API
, &api_struct
)) {
253 error_report("%s failed: UFFDIO_API failed: %s", __func__
,
258 ioctl_mask
= (__u64
)1 << _UFFDIO_REGISTER
|
259 (__u64
)1 << _UFFDIO_UNREGISTER
;
260 if ((api_struct
.ioctls
& ioctl_mask
) != ioctl_mask
) {
261 error_report("Missing userfault features: %" PRIx64
,
262 (uint64_t)(~api_struct
.ioctls
& ioctl_mask
));
269 static bool ufd_check_and_apply(int ufd
, MigrationIncomingState
*mis
)
271 uint64_t asked_features
= 0;
272 static uint64_t supported_features
;
275 * it's not possible to
276 * request UFFD_API twice per one fd
277 * userfault fd features is persistent
279 if (!supported_features
) {
280 if (!receive_ufd_features(&supported_features
)) {
281 error_report("%s failed", __func__
);
286 #ifdef UFFD_FEATURE_THREAD_ID
287 if (migrate_postcopy_blocktime() && mis
&&
288 UFFD_FEATURE_THREAD_ID
& supported_features
) {
289 /* kernel supports that feature */
290 /* don't create blocktime_context if it exists */
291 if (!mis
->blocktime_ctx
) {
292 mis
->blocktime_ctx
= blocktime_context_new();
295 asked_features
|= UFFD_FEATURE_THREAD_ID
;
300 * request features, even if asked_features is 0, due to
301 * kernel expects UFFD_API before UFFDIO_REGISTER, per
302 * userfault file descriptor
304 if (!request_ufd_features(ufd
, asked_features
)) {
305 error_report("%s failed: features %" PRIu64
, __func__
,
310 if (qemu_real_host_page_size
!= ram_pagesize_summary()) {
311 bool have_hp
= false;
312 /* We've got a huge page */
313 #ifdef UFFD_FEATURE_MISSING_HUGETLBFS
314 have_hp
= supported_features
& UFFD_FEATURE_MISSING_HUGETLBFS
;
317 error_report("Userfault on this host does not support huge pages");
324 /* Callback from postcopy_ram_supported_by_host block iterator.
326 static int test_ramblock_postcopiable(RAMBlock
*rb
, void *opaque
)
328 const char *block_name
= qemu_ram_get_idstr(rb
);
329 ram_addr_t length
= qemu_ram_get_used_length(rb
);
330 size_t pagesize
= qemu_ram_pagesize(rb
);
332 if (length
% pagesize
) {
333 error_report("Postcopy requires RAM blocks to be a page size multiple,"
334 " block %s is 0x" RAM_ADDR_FMT
" bytes with a "
335 "page size of 0x%zx", block_name
, length
, pagesize
);
342 * Note: This has the side effect of munlock'ing all of RAM, that's
343 * normally fine since if the postcopy succeeds it gets turned back on at the
346 bool postcopy_ram_supported_by_host(MigrationIncomingState
*mis
)
348 long pagesize
= qemu_real_host_page_size
;
350 bool ret
= false; /* Error unless we change it */
351 void *testarea
= NULL
;
352 struct uffdio_register reg_struct
;
353 struct uffdio_range range_struct
;
354 uint64_t feature_mask
;
355 Error
*local_err
= NULL
;
357 if (qemu_target_page_size() > pagesize
) {
358 error_report("Target page size bigger than host page size");
362 ufd
= syscall(__NR_userfaultfd
, O_CLOEXEC
);
364 error_report("%s: userfaultfd not available: %s", __func__
,
369 /* Give devices a chance to object */
370 if (postcopy_notify(POSTCOPY_NOTIFY_PROBE
, &local_err
)) {
371 error_report_err(local_err
);
375 /* Version and features check */
376 if (!ufd_check_and_apply(ufd
, mis
)) {
380 /* We don't support postcopy with shared RAM yet */
381 if (foreach_not_ignored_block(test_ramblock_postcopiable
, NULL
)) {
386 * userfault and mlock don't go together; we'll put it back later if
390 error_report("%s: munlockall: %s", __func__
, strerror(errno
));
395 * We need to check that the ops we need are supported on anon memory
396 * To do that we need to register a chunk and see the flags that
399 testarea
= mmap(NULL
, pagesize
, PROT_READ
| PROT_WRITE
, MAP_PRIVATE
|
400 MAP_ANONYMOUS
, -1, 0);
401 if (testarea
== MAP_FAILED
) {
402 error_report("%s: Failed to map test area: %s", __func__
,
406 g_assert(((size_t)testarea
& (pagesize
- 1)) == 0);
408 reg_struct
.range
.start
= (uintptr_t)testarea
;
409 reg_struct
.range
.len
= pagesize
;
410 reg_struct
.mode
= UFFDIO_REGISTER_MODE_MISSING
;
412 if (ioctl(ufd
, UFFDIO_REGISTER
, ®_struct
)) {
413 error_report("%s userfault register: %s", __func__
, strerror(errno
));
417 range_struct
.start
= (uintptr_t)testarea
;
418 range_struct
.len
= pagesize
;
419 if (ioctl(ufd
, UFFDIO_UNREGISTER
, &range_struct
)) {
420 error_report("%s userfault unregister: %s", __func__
, strerror(errno
));
424 feature_mask
= (__u64
)1 << _UFFDIO_WAKE
|
425 (__u64
)1 << _UFFDIO_COPY
|
426 (__u64
)1 << _UFFDIO_ZEROPAGE
;
427 if ((reg_struct
.ioctls
& feature_mask
) != feature_mask
) {
428 error_report("Missing userfault map features: %" PRIx64
,
429 (uint64_t)(~reg_struct
.ioctls
& feature_mask
));
437 munmap(testarea
, pagesize
);
446 * Setup an area of RAM so that it *can* be used for postcopy later; this
447 * must be done right at the start prior to pre-copy.
448 * opaque should be the MIS.
450 static int init_range(RAMBlock
*rb
, void *opaque
)
452 const char *block_name
= qemu_ram_get_idstr(rb
);
453 void *host_addr
= qemu_ram_get_host_addr(rb
);
454 ram_addr_t offset
= qemu_ram_get_offset(rb
);
455 ram_addr_t length
= qemu_ram_get_used_length(rb
);
456 trace_postcopy_init_range(block_name
, host_addr
, offset
, length
);
459 * We need the whole of RAM to be truly empty for postcopy, so things
460 * like ROMs and any data tables built during init must be zero'd
461 * - we're going to get the copy from the source anyway.
462 * (Precopy will just overwrite this data, so doesn't need the discard)
464 if (ram_discard_range(block_name
, 0, length
)) {
472 * At the end of migration, undo the effects of init_range
473 * opaque should be the MIS.
475 static int cleanup_range(RAMBlock
*rb
, void *opaque
)
477 const char *block_name
= qemu_ram_get_idstr(rb
);
478 void *host_addr
= qemu_ram_get_host_addr(rb
);
479 ram_addr_t offset
= qemu_ram_get_offset(rb
);
480 ram_addr_t length
= qemu_ram_get_used_length(rb
);
481 MigrationIncomingState
*mis
= opaque
;
482 struct uffdio_range range_struct
;
483 trace_postcopy_cleanup_range(block_name
, host_addr
, offset
, length
);
486 * We turned off hugepage for the precopy stage with postcopy enabled
487 * we can turn it back on now.
489 qemu_madvise(host_addr
, length
, QEMU_MADV_HUGEPAGE
);
492 * We can also turn off userfault now since we should have all the
493 * pages. It can be useful to leave it on to debug postcopy
494 * if you're not sure it's always getting every page.
496 range_struct
.start
= (uintptr_t)host_addr
;
497 range_struct
.len
= length
;
499 if (ioctl(mis
->userfault_fd
, UFFDIO_UNREGISTER
, &range_struct
)) {
500 error_report("%s: userfault unregister %s", __func__
, strerror(errno
));
509 * Initialise postcopy-ram, setting the RAM to a state where we can go into
510 * postcopy later; must be called prior to any precopy.
511 * called from arch_init's similarly named ram_postcopy_incoming_init
513 int postcopy_ram_incoming_init(MigrationIncomingState
*mis
)
515 if (foreach_not_ignored_block(init_range
, NULL
)) {
523 * At the end of a migration where postcopy_ram_incoming_init was called.
525 int postcopy_ram_incoming_cleanup(MigrationIncomingState
*mis
)
527 trace_postcopy_ram_incoming_cleanup_entry();
529 if (mis
->have_fault_thread
) {
530 Error
*local_err
= NULL
;
532 /* Let the fault thread quit */
533 qatomic_set(&mis
->fault_thread_quit
, 1);
534 postcopy_fault_thread_notify(mis
);
535 trace_postcopy_ram_incoming_cleanup_join();
536 qemu_thread_join(&mis
->fault_thread
);
538 if (postcopy_notify(POSTCOPY_NOTIFY_INBOUND_END
, &local_err
)) {
539 error_report_err(local_err
);
543 if (foreach_not_ignored_block(cleanup_range
, mis
)) {
547 trace_postcopy_ram_incoming_cleanup_closeuf();
548 close(mis
->userfault_fd
);
549 close(mis
->userfault_event_fd
);
550 mis
->have_fault_thread
= false;
554 if (os_mlock() < 0) {
555 error_report("mlock: %s", strerror(errno
));
557 * It doesn't feel right to fail at this point, we have a valid
563 if (mis
->postcopy_tmp_page
) {
564 munmap(mis
->postcopy_tmp_page
, mis
->largest_page_size
);
565 mis
->postcopy_tmp_page
= NULL
;
567 if (mis
->postcopy_tmp_zero_page
) {
568 munmap(mis
->postcopy_tmp_zero_page
, mis
->largest_page_size
);
569 mis
->postcopy_tmp_zero_page
= NULL
;
571 trace_postcopy_ram_incoming_cleanup_blocktime(
572 get_postcopy_total_blocktime());
574 trace_postcopy_ram_incoming_cleanup_exit();
579 * Disable huge pages on an area
581 static int nhp_range(RAMBlock
*rb
, void *opaque
)
583 const char *block_name
= qemu_ram_get_idstr(rb
);
584 void *host_addr
= qemu_ram_get_host_addr(rb
);
585 ram_addr_t offset
= qemu_ram_get_offset(rb
);
586 ram_addr_t length
= qemu_ram_get_used_length(rb
);
587 trace_postcopy_nhp_range(block_name
, host_addr
, offset
, length
);
590 * Before we do discards we need to ensure those discards really
591 * do delete areas of the page, even if THP thinks a hugepage would
592 * be a good idea, so force hugepages off.
594 qemu_madvise(host_addr
, length
, QEMU_MADV_NOHUGEPAGE
);
600 * Userfault requires us to mark RAM as NOHUGEPAGE prior to discard
601 * however leaving it until after precopy means that most of the precopy
604 int postcopy_ram_prepare_discard(MigrationIncomingState
*mis
)
606 if (foreach_not_ignored_block(nhp_range
, mis
)) {
610 postcopy_state_set(POSTCOPY_INCOMING_DISCARD
);
616 * Mark the given area of RAM as requiring notification to unwritten areas
617 * Used as a callback on foreach_not_ignored_block.
618 * host_addr: Base of area to mark
619 * offset: Offset in the whole ram arena
620 * length: Length of the section
621 * opaque: MigrationIncomingState pointer
622 * Returns 0 on success
624 static int ram_block_enable_notify(RAMBlock
*rb
, void *opaque
)
626 MigrationIncomingState
*mis
= opaque
;
627 struct uffdio_register reg_struct
;
629 reg_struct
.range
.start
= (uintptr_t)qemu_ram_get_host_addr(rb
);
630 reg_struct
.range
.len
= qemu_ram_get_used_length(rb
);
631 reg_struct
.mode
= UFFDIO_REGISTER_MODE_MISSING
;
633 /* Now tell our userfault_fd that it's responsible for this area */
634 if (ioctl(mis
->userfault_fd
, UFFDIO_REGISTER
, ®_struct
)) {
635 error_report("%s userfault register: %s", __func__
, strerror(errno
));
638 if (!(reg_struct
.ioctls
& ((__u64
)1 << _UFFDIO_COPY
))) {
639 error_report("%s userfault: Region doesn't support COPY", __func__
);
642 if (reg_struct
.ioctls
& ((__u64
)1 << _UFFDIO_ZEROPAGE
)) {
643 qemu_ram_set_uf_zeroable(rb
);
649 int postcopy_wake_shared(struct PostCopyFD
*pcfd
,
650 uint64_t client_addr
,
653 size_t pagesize
= qemu_ram_pagesize(rb
);
654 struct uffdio_range range
;
656 trace_postcopy_wake_shared(client_addr
, qemu_ram_get_idstr(rb
));
657 range
.start
= client_addr
& ~(pagesize
- 1);
658 range
.len
= pagesize
;
659 ret
= ioctl(pcfd
->fd
, UFFDIO_WAKE
, &range
);
661 error_report("%s: Failed to wake: %zx in %s (%s)",
662 __func__
, (size_t)client_addr
, qemu_ram_get_idstr(rb
),
669 * Callback from shared fault handlers to ask for a page,
670 * the page must be specified by a RAMBlock and an offset in that rb
671 * Note: Only for use by shared fault handlers (in fault thread)
673 int postcopy_request_shared_page(struct PostCopyFD
*pcfd
, RAMBlock
*rb
,
674 uint64_t client_addr
, uint64_t rb_offset
)
676 size_t pagesize
= qemu_ram_pagesize(rb
);
677 uint64_t aligned_rbo
= rb_offset
& ~(pagesize
- 1);
678 MigrationIncomingState
*mis
= migration_incoming_get_current();
680 trace_postcopy_request_shared_page(pcfd
->idstr
, qemu_ram_get_idstr(rb
),
682 if (ramblock_recv_bitmap_test_byte_offset(rb
, aligned_rbo
)) {
683 trace_postcopy_request_shared_page_present(pcfd
->idstr
,
684 qemu_ram_get_idstr(rb
), rb_offset
);
685 return postcopy_wake_shared(pcfd
, client_addr
, rb
);
687 migrate_send_rp_req_pages(mis
, rb
, aligned_rbo
, client_addr
);
691 static int get_mem_fault_cpu_index(uint32_t pid
)
695 CPU_FOREACH(cpu_iter
) {
696 if (cpu_iter
->thread_id
== pid
) {
697 trace_get_mem_fault_cpu_index(cpu_iter
->cpu_index
, pid
);
698 return cpu_iter
->cpu_index
;
701 trace_get_mem_fault_cpu_index(-1, pid
);
705 static uint32_t get_low_time_offset(PostcopyBlocktimeContext
*dc
)
707 int64_t start_time_offset
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
) -
709 return start_time_offset
< 1 ? 1 : start_time_offset
& UINT32_MAX
;
713 * This function is being called when pagefault occurs. It
714 * tracks down vCPU blocking time.
716 * @addr: faulted host virtual address
717 * @ptid: faulted process thread id
718 * @rb: ramblock appropriate to addr
720 static void mark_postcopy_blocktime_begin(uintptr_t addr
, uint32_t ptid
,
723 int cpu
, already_received
;
724 MigrationIncomingState
*mis
= migration_incoming_get_current();
725 PostcopyBlocktimeContext
*dc
= mis
->blocktime_ctx
;
726 uint32_t low_time_offset
;
728 if (!dc
|| ptid
== 0) {
731 cpu
= get_mem_fault_cpu_index(ptid
);
736 low_time_offset
= get_low_time_offset(dc
);
737 if (dc
->vcpu_addr
[cpu
] == 0) {
738 qatomic_inc(&dc
->smp_cpus_down
);
741 qatomic_xchg(&dc
->last_begin
, low_time_offset
);
742 qatomic_xchg(&dc
->page_fault_vcpu_time
[cpu
], low_time_offset
);
743 qatomic_xchg(&dc
->vcpu_addr
[cpu
], addr
);
746 * check it here, not at the beginning of the function,
747 * due to, check could occur early than bitmap_set in
748 * qemu_ufd_copy_ioctl
750 already_received
= ramblock_recv_bitmap_test(rb
, (void *)addr
);
751 if (already_received
) {
752 qatomic_xchg(&dc
->vcpu_addr
[cpu
], 0);
753 qatomic_xchg(&dc
->page_fault_vcpu_time
[cpu
], 0);
754 qatomic_dec(&dc
->smp_cpus_down
);
756 trace_mark_postcopy_blocktime_begin(addr
, dc
, dc
->page_fault_vcpu_time
[cpu
],
757 cpu
, already_received
);
761 * This function just provide calculated blocktime per cpu and trace it.
762 * Total blocktime is calculated in mark_postcopy_blocktime_end.
765 * Assume we have 3 CPU
768 * -----***********------------xxx***************------------------------> CPU1
771 * ------------****************xxx---------------------------------------> CPU2
774 * ------------------------****xxx********-------------------------------> CPU3
776 * We have sequence S1,S2,E1,S3,S1,E2,E3,E1
777 * S2,E1 - doesn't match condition due to sequence S1,S2,E1 doesn't include CPU3
778 * S3,S1,E2 - sequence includes all CPUs, in this case overlap will be S1,E2 -
779 * it's a part of total blocktime.
780 * S1 - here is last_begin
781 * Legend of the picture is following:
782 * * - means blocktime per vCPU
783 * x - means overlapped blocktime (total blocktime)
785 * @addr: host virtual address
787 static void mark_postcopy_blocktime_end(uintptr_t addr
)
789 MigrationIncomingState
*mis
= migration_incoming_get_current();
790 PostcopyBlocktimeContext
*dc
= mis
->blocktime_ctx
;
791 MachineState
*ms
= MACHINE(qdev_get_machine());
792 unsigned int smp_cpus
= ms
->smp
.cpus
;
793 int i
, affected_cpu
= 0;
794 bool vcpu_total_blocktime
= false;
795 uint32_t read_vcpu_time
, low_time_offset
;
801 low_time_offset
= get_low_time_offset(dc
);
802 /* lookup cpu, to clear it,
803 * that algorithm looks straightforward, but it's not
804 * optimal, more optimal algorithm is keeping tree or hash
805 * where key is address value is a list of */
806 for (i
= 0; i
< smp_cpus
; i
++) {
807 uint32_t vcpu_blocktime
= 0;
809 read_vcpu_time
= qatomic_fetch_add(&dc
->page_fault_vcpu_time
[i
], 0);
810 if (qatomic_fetch_add(&dc
->vcpu_addr
[i
], 0) != addr
||
811 read_vcpu_time
== 0) {
814 qatomic_xchg(&dc
->vcpu_addr
[i
], 0);
815 vcpu_blocktime
= low_time_offset
- read_vcpu_time
;
817 /* we need to know is that mark_postcopy_end was due to
818 * faulted page, another possible case it's prefetched
819 * page and in that case we shouldn't be here */
820 if (!vcpu_total_blocktime
&&
821 qatomic_fetch_add(&dc
->smp_cpus_down
, 0) == smp_cpus
) {
822 vcpu_total_blocktime
= true;
824 /* continue cycle, due to one page could affect several vCPUs */
825 dc
->vcpu_blocktime
[i
] += vcpu_blocktime
;
828 qatomic_sub(&dc
->smp_cpus_down
, affected_cpu
);
829 if (vcpu_total_blocktime
) {
830 dc
->total_blocktime
+= low_time_offset
- qatomic_fetch_add(
833 trace_mark_postcopy_blocktime_end(addr
, dc
, dc
->total_blocktime
,
837 static bool postcopy_pause_fault_thread(MigrationIncomingState
*mis
)
839 trace_postcopy_pause_fault_thread();
841 qemu_sem_wait(&mis
->postcopy_pause_sem_fault
);
843 trace_postcopy_pause_fault_thread_continued();
849 * Handle faults detected by the USERFAULT markings
851 static void *postcopy_ram_fault_thread(void *opaque
)
853 MigrationIncomingState
*mis
= opaque
;
859 trace_postcopy_ram_fault_thread_entry();
860 rcu_register_thread();
861 mis
->last_rb
= NULL
; /* last RAMBlock we sent part of */
862 qemu_sem_post(&mis
->fault_thread_sem
);
865 size_t pfd_len
= 2 + mis
->postcopy_remote_fds
->len
;
867 pfd
= g_new0(struct pollfd
, pfd_len
);
869 pfd
[0].fd
= mis
->userfault_fd
;
870 pfd
[0].events
= POLLIN
;
871 pfd
[1].fd
= mis
->userfault_event_fd
;
872 pfd
[1].events
= POLLIN
; /* Waiting for eventfd to go positive */
873 trace_postcopy_ram_fault_thread_fds_core(pfd
[0].fd
, pfd
[1].fd
);
874 for (index
= 0; index
< mis
->postcopy_remote_fds
->len
; index
++) {
875 struct PostCopyFD
*pcfd
= &g_array_index(mis
->postcopy_remote_fds
,
876 struct PostCopyFD
, index
);
877 pfd
[2 + index
].fd
= pcfd
->fd
;
878 pfd
[2 + index
].events
= POLLIN
;
879 trace_postcopy_ram_fault_thread_fds_extra(2 + index
, pcfd
->idstr
,
884 ram_addr_t rb_offset
;
888 * We're mainly waiting for the kernel to give us a faulting HVA,
889 * however we can be told to quit via userfault_quit_fd which is
893 poll_result
= poll(pfd
, pfd_len
, -1 /* Wait forever */);
894 if (poll_result
== -1) {
895 error_report("%s: userfault poll: %s", __func__
, strerror(errno
));
899 if (!mis
->to_src_file
) {
901 * Possibly someone tells us that the return path is
902 * broken already using the event. We should hold until
903 * the channel is rebuilt.
905 if (postcopy_pause_fault_thread(mis
)) {
906 /* Continue to read the userfaultfd */
908 error_report("%s: paused but don't allow to continue",
914 if (pfd
[1].revents
) {
917 /* Consume the signal */
918 if (read(mis
->userfault_event_fd
, &tmp64
, 8) != 8) {
919 /* Nothing obviously nicer than posting this error. */
920 error_report("%s: read() failed", __func__
);
923 if (qatomic_read(&mis
->fault_thread_quit
)) {
924 trace_postcopy_ram_fault_thread_quit();
929 if (pfd
[0].revents
) {
931 ret
= read(mis
->userfault_fd
, &msg
, sizeof(msg
));
932 if (ret
!= sizeof(msg
)) {
933 if (errno
== EAGAIN
) {
935 * if a wake up happens on the other thread just after
936 * the poll, there is nothing to read.
941 error_report("%s: Failed to read full userfault "
943 __func__
, strerror(errno
));
946 error_report("%s: Read %d bytes from userfaultfd "
948 __func__
, ret
, sizeof(msg
));
949 break; /* Lost alignment, don't know what we'd read next */
952 if (msg
.event
!= UFFD_EVENT_PAGEFAULT
) {
953 error_report("%s: Read unexpected event %ud from userfaultfd",
954 __func__
, msg
.event
);
955 continue; /* It's not a page fault, shouldn't happen */
958 rb
= qemu_ram_block_from_host(
959 (void *)(uintptr_t)msg
.arg
.pagefault
.address
,
962 error_report("postcopy_ram_fault_thread: Fault outside guest: %"
963 PRIx64
, (uint64_t)msg
.arg
.pagefault
.address
);
967 rb_offset
&= ~(qemu_ram_pagesize(rb
) - 1);
968 trace_postcopy_ram_fault_thread_request(msg
.arg
.pagefault
.address
,
969 qemu_ram_get_idstr(rb
),
971 msg
.arg
.pagefault
.feat
.ptid
);
972 mark_postcopy_blocktime_begin(
973 (uintptr_t)(msg
.arg
.pagefault
.address
),
974 msg
.arg
.pagefault
.feat
.ptid
, rb
);
978 * Send the request to the source - we want to request one
979 * of our host page sizes (which is >= TPS)
981 ret
= migrate_send_rp_req_pages(mis
, rb
, rb_offset
,
982 msg
.arg
.pagefault
.address
);
984 /* May be network failure, try to wait for recovery */
985 if (ret
== -EIO
&& postcopy_pause_fault_thread(mis
)) {
986 /* We got reconnected somehow, try to continue */
989 /* This is a unavoidable fault */
990 error_report("%s: migrate_send_rp_req_pages() get %d",
997 /* Now handle any requests from external processes on shared memory */
998 /* TODO: May need to handle devices deregistering during postcopy */
999 for (index
= 2; index
< pfd_len
&& poll_result
; index
++) {
1000 if (pfd
[index
].revents
) {
1001 struct PostCopyFD
*pcfd
=
1002 &g_array_index(mis
->postcopy_remote_fds
,
1003 struct PostCopyFD
, index
- 2);
1006 if (pfd
[index
].revents
& POLLERR
) {
1007 error_report("%s: POLLERR on poll %zd fd=%d",
1008 __func__
, index
, pcfd
->fd
);
1009 pfd
[index
].events
= 0;
1013 ret
= read(pcfd
->fd
, &msg
, sizeof(msg
));
1014 if (ret
!= sizeof(msg
)) {
1015 if (errno
== EAGAIN
) {
1017 * if a wake up happens on the other thread just after
1018 * the poll, there is nothing to read.
1023 error_report("%s: Failed to read full userfault "
1024 "message: %s (shared) revents=%d",
1025 __func__
, strerror(errno
),
1026 pfd
[index
].revents
);
1027 /*TODO: Could just disable this sharer */
1030 error_report("%s: Read %d bytes from userfaultfd "
1031 "expected %zd (shared)",
1032 __func__
, ret
, sizeof(msg
));
1033 /*TODO: Could just disable this sharer */
1034 break; /*Lost alignment,don't know what we'd read next*/
1037 if (msg
.event
!= UFFD_EVENT_PAGEFAULT
) {
1038 error_report("%s: Read unexpected event %ud "
1039 "from userfaultfd (shared)",
1040 __func__
, msg
.event
);
1041 continue; /* It's not a page fault, shouldn't happen */
1043 /* Call the device handler registered with us */
1044 ret
= pcfd
->handler(pcfd
, &msg
);
1046 error_report("%s: Failed to resolve shared fault on %zd/%s",
1047 __func__
, index
, pcfd
->idstr
);
1048 /* TODO: Fail? Disable this sharer? */
1053 rcu_unregister_thread();
1054 trace_postcopy_ram_fault_thread_exit();
1059 int postcopy_ram_incoming_setup(MigrationIncomingState
*mis
)
1061 /* Open the fd for the kernel to give us userfaults */
1062 mis
->userfault_fd
= syscall(__NR_userfaultfd
, O_CLOEXEC
| O_NONBLOCK
);
1063 if (mis
->userfault_fd
== -1) {
1064 error_report("%s: Failed to open userfault fd: %s", __func__
,
1070 * Although the host check already tested the API, we need to
1071 * do the check again as an ABI handshake on the new fd.
1073 if (!ufd_check_and_apply(mis
->userfault_fd
, mis
)) {
1077 /* Now an eventfd we use to tell the fault-thread to quit */
1078 mis
->userfault_event_fd
= eventfd(0, EFD_CLOEXEC
);
1079 if (mis
->userfault_event_fd
== -1) {
1080 error_report("%s: Opening userfault_event_fd: %s", __func__
,
1082 close(mis
->userfault_fd
);
1086 qemu_sem_init(&mis
->fault_thread_sem
, 0);
1087 qemu_thread_create(&mis
->fault_thread
, "postcopy/fault",
1088 postcopy_ram_fault_thread
, mis
, QEMU_THREAD_JOINABLE
);
1089 qemu_sem_wait(&mis
->fault_thread_sem
);
1090 qemu_sem_destroy(&mis
->fault_thread_sem
);
1091 mis
->have_fault_thread
= true;
1093 /* Mark so that we get notified of accesses to unwritten areas */
1094 if (foreach_not_ignored_block(ram_block_enable_notify
, mis
)) {
1095 error_report("ram_block_enable_notify failed");
1099 mis
->postcopy_tmp_page
= mmap(NULL
, mis
->largest_page_size
,
1100 PROT_READ
| PROT_WRITE
, MAP_PRIVATE
|
1101 MAP_ANONYMOUS
, -1, 0);
1102 if (mis
->postcopy_tmp_page
== MAP_FAILED
) {
1103 mis
->postcopy_tmp_page
= NULL
;
1104 error_report("%s: Failed to map postcopy_tmp_page %s",
1105 __func__
, strerror(errno
));
1110 * Map large zero page when kernel can't use UFFDIO_ZEROPAGE for hugepages
1112 mis
->postcopy_tmp_zero_page
= mmap(NULL
, mis
->largest_page_size
,
1113 PROT_READ
| PROT_WRITE
,
1114 MAP_PRIVATE
| MAP_ANONYMOUS
,
1116 if (mis
->postcopy_tmp_zero_page
== MAP_FAILED
) {
1118 mis
->postcopy_tmp_zero_page
= NULL
;
1119 error_report("%s: Failed to map large zero page %s",
1120 __func__
, strerror(e
));
1123 memset(mis
->postcopy_tmp_zero_page
, '\0', mis
->largest_page_size
);
1125 trace_postcopy_ram_enable_notify();
1130 static int qemu_ufd_copy_ioctl(MigrationIncomingState
*mis
, void *host_addr
,
1131 void *from_addr
, uint64_t pagesize
, RAMBlock
*rb
)
1133 int userfault_fd
= mis
->userfault_fd
;
1137 struct uffdio_copy copy_struct
;
1138 copy_struct
.dst
= (uint64_t)(uintptr_t)host_addr
;
1139 copy_struct
.src
= (uint64_t)(uintptr_t)from_addr
;
1140 copy_struct
.len
= pagesize
;
1141 copy_struct
.mode
= 0;
1142 ret
= ioctl(userfault_fd
, UFFDIO_COPY
, ©_struct
);
1144 struct uffdio_zeropage zero_struct
;
1145 zero_struct
.range
.start
= (uint64_t)(uintptr_t)host_addr
;
1146 zero_struct
.range
.len
= pagesize
;
1147 zero_struct
.mode
= 0;
1148 ret
= ioctl(userfault_fd
, UFFDIO_ZEROPAGE
, &zero_struct
);
1151 qemu_mutex_lock(&mis
->page_request_mutex
);
1152 ramblock_recv_bitmap_set_range(rb
, host_addr
,
1153 pagesize
/ qemu_target_page_size());
1155 * If this page resolves a page fault for a previous recorded faulted
1156 * address, take a special note to maintain the requested page list.
1158 if (g_tree_lookup(mis
->page_requested
, host_addr
)) {
1159 g_tree_remove(mis
->page_requested
, host_addr
);
1160 mis
->page_requested_count
--;
1161 trace_postcopy_page_req_del(host_addr
, mis
->page_requested_count
);
1163 qemu_mutex_unlock(&mis
->page_request_mutex
);
1164 mark_postcopy_blocktime_end((uintptr_t)host_addr
);
1169 int postcopy_notify_shared_wake(RAMBlock
*rb
, uint64_t offset
)
1172 MigrationIncomingState
*mis
= migration_incoming_get_current();
1173 GArray
*pcrfds
= mis
->postcopy_remote_fds
;
1175 for (i
= 0; i
< pcrfds
->len
; i
++) {
1176 struct PostCopyFD
*cur
= &g_array_index(pcrfds
, struct PostCopyFD
, i
);
1177 int ret
= cur
->waker(cur
, rb
, offset
);
1186 * Place a host page (from) at (host) atomically
1187 * returns 0 on success
1189 int postcopy_place_page(MigrationIncomingState
*mis
, void *host
, void *from
,
1192 size_t pagesize
= qemu_ram_pagesize(rb
);
1194 /* copy also acks to the kernel waking the stalled thread up
1195 * TODO: We can inhibit that ack and only do it if it was requested
1196 * which would be slightly cheaper, but we'd have to be careful
1197 * of the order of updating our page state.
1199 if (qemu_ufd_copy_ioctl(mis
, host
, from
, pagesize
, rb
)) {
1201 error_report("%s: %s copy host: %p from: %p (size: %zd)",
1202 __func__
, strerror(e
), host
, from
, pagesize
);
1207 trace_postcopy_place_page(host
);
1208 return postcopy_notify_shared_wake(rb
,
1209 qemu_ram_block_host_offset(rb
, host
));
1213 * Place a zero page at (host) atomically
1214 * returns 0 on success
1216 int postcopy_place_page_zero(MigrationIncomingState
*mis
, void *host
,
1219 size_t pagesize
= qemu_ram_pagesize(rb
);
1220 trace_postcopy_place_page_zero(host
);
1222 /* Normal RAMBlocks can zero a page using UFFDIO_ZEROPAGE
1223 * but it's not available for everything (e.g. hugetlbpages)
1225 if (qemu_ram_is_uf_zeroable(rb
)) {
1226 if (qemu_ufd_copy_ioctl(mis
, host
, NULL
, pagesize
, rb
)) {
1228 error_report("%s: %s zero host: %p",
1229 __func__
, strerror(e
), host
);
1233 return postcopy_notify_shared_wake(rb
,
1234 qemu_ram_block_host_offset(rb
,
1237 return postcopy_place_page(mis
, host
, mis
->postcopy_tmp_zero_page
, rb
);
1242 /* No target OS support, stubs just fail */
1243 void fill_destination_postcopy_migration_info(MigrationInfo
*info
)
1247 bool postcopy_ram_supported_by_host(MigrationIncomingState
*mis
)
1249 error_report("%s: No OS support", __func__
);
1253 int postcopy_ram_incoming_init(MigrationIncomingState
*mis
)
1255 error_report("postcopy_ram_incoming_init: No OS support");
1259 int postcopy_ram_incoming_cleanup(MigrationIncomingState
*mis
)
1265 int postcopy_ram_prepare_discard(MigrationIncomingState
*mis
)
1271 int postcopy_request_shared_page(struct PostCopyFD
*pcfd
, RAMBlock
*rb
,
1272 uint64_t client_addr
, uint64_t rb_offset
)
1278 int postcopy_ram_incoming_setup(MigrationIncomingState
*mis
)
1284 int postcopy_place_page(MigrationIncomingState
*mis
, void *host
, void *from
,
1291 int postcopy_place_page_zero(MigrationIncomingState
*mis
, void *host
,
1298 int postcopy_wake_shared(struct PostCopyFD
*pcfd
,
1299 uint64_t client_addr
,
1307 /* ------------------------------------------------------------------------- */
1309 void postcopy_fault_thread_notify(MigrationIncomingState
*mis
)
1314 * Wakeup the fault_thread. It's an eventfd that should currently
1315 * be at 0, we're going to increment it to 1
1317 if (write(mis
->userfault_event_fd
, &tmp64
, 8) != 8) {
1318 /* Not much we can do here, but may as well report it */
1319 error_report("%s: incrementing failed: %s", __func__
,
1325 * postcopy_discard_send_init: Called at the start of each RAMBlock before
1326 * asking to discard individual ranges.
1328 * @ms: The current migration state.
1329 * @offset: the bitmap offset of the named RAMBlock in the migration bitmap.
1330 * @name: RAMBlock that discards will operate on.
1332 static PostcopyDiscardState pds
= {0};
1333 void postcopy_discard_send_init(MigrationState
*ms
, const char *name
)
1335 pds
.ramblock_name
= name
;
1342 * postcopy_discard_send_range: Called by the bitmap code for each chunk to
1343 * discard. May send a discard message, may just leave it queued to
1346 * @ms: Current migration state.
1347 * @start,@length: a range of pages in the migration bitmap in the
1348 * RAM block passed to postcopy_discard_send_init() (length=1 is one page)
1350 void postcopy_discard_send_range(MigrationState
*ms
, unsigned long start
,
1351 unsigned long length
)
1353 size_t tp_size
= qemu_target_page_size();
1354 /* Convert to byte offsets within the RAM block */
1355 pds
.start_list
[pds
.cur_entry
] = start
* tp_size
;
1356 pds
.length_list
[pds
.cur_entry
] = length
* tp_size
;
1357 trace_postcopy_discard_send_range(pds
.ramblock_name
, start
, length
);
1361 if (pds
.cur_entry
== MAX_DISCARDS_PER_COMMAND
) {
1362 /* Full set, ship it! */
1363 qemu_savevm_send_postcopy_ram_discard(ms
->to_dst_file
,
1374 * postcopy_discard_send_finish: Called at the end of each RAMBlock by the
1375 * bitmap code. Sends any outstanding discard messages, frees the PDS
1377 * @ms: Current migration state.
1379 void postcopy_discard_send_finish(MigrationState
*ms
)
1381 /* Anything unsent? */
1382 if (pds
.cur_entry
) {
1383 qemu_savevm_send_postcopy_ram_discard(ms
->to_dst_file
,
1391 trace_postcopy_discard_send_finish(pds
.ramblock_name
, pds
.nsentwords
,
1396 * Current state of incoming postcopy; note this is not part of
1397 * MigrationIncomingState since it's state is used during cleanup
1398 * at the end as MIS is being freed.
1400 static PostcopyState incoming_postcopy_state
;
1402 PostcopyState
postcopy_state_get(void)
1404 return qatomic_mb_read(&incoming_postcopy_state
);
1407 /* Set the state and return the old state */
1408 PostcopyState
postcopy_state_set(PostcopyState new_state
)
1410 return qatomic_xchg(&incoming_postcopy_state
, new_state
);
1413 /* Register a handler for external shared memory postcopy
1414 * called on the destination.
1416 void postcopy_register_shared_ufd(struct PostCopyFD
*pcfd
)
1418 MigrationIncomingState
*mis
= migration_incoming_get_current();
1420 mis
->postcopy_remote_fds
= g_array_append_val(mis
->postcopy_remote_fds
,
1424 /* Unregister a handler for external shared memory postcopy
1426 void postcopy_unregister_shared_ufd(struct PostCopyFD
*pcfd
)
1429 MigrationIncomingState
*mis
= migration_incoming_get_current();
1430 GArray
*pcrfds
= mis
->postcopy_remote_fds
;
1432 for (i
= 0; i
< pcrfds
->len
; i
++) {
1433 struct PostCopyFD
*cur
= &g_array_index(pcrfds
, struct PostCopyFD
, i
);
1434 if (cur
->fd
== pcfd
->fd
) {
1435 mis
->postcopy_remote_fds
= g_array_remove_index(pcrfds
, i
);