hw/arm/sabrelite.c

   1 /*
   2  * SABRELITE Board System emulation.
   3  *
   4  * Copyright (c) 2015 Jean-Christophe Dubois <jcd@tribudubois.net>
   5  *
   6  * This code is licensed under the GPL, version 2 or later.
   7  * See the file `COPYING' in the top level directory.
   8  *
   9  * It (partially) emulates a sabrelite board, with a Freescale
  10  * i.MX6 SoC
  11  */
  12
  13 #include "qemu/osdep.h"
  14 #include "qapi/error.h"
  15 #include "hw/arm/fsl-imx6.h"
  16 #include "hw/boards.h"
  17 #include "hw/qdev-properties.h"
  18 #include "qemu/error-report.h"
  19 #include "sysemu/qtest.h"
  20
  21 static struct arm_boot_info sabrelite_binfo = {
  22     /* DDR memory start */
  23     .loader_start = FSL_IMX6_MMDC_ADDR,
  24     /* No board ID, we boot from DT tree */
  25     .board_id = -1,
  26 };
  27
  28 /* No need to do any particular setup for secondary boot */
  29 static void sabrelite_write_secondary(ARMCPU *cpu,
  30                                       const struct arm_boot_info *info)
  31 {
  32 }
  33
  34 /* Secondary cores are reset through SRC device */
  35 static void sabrelite_reset_secondary(ARMCPU *cpu,
  36                                       const struct arm_boot_info *info)
  37 {
  38 }
  39
  40 static void sabrelite_init(MachineState *machine)
  41 {
  42     FslIMX6State *s;
  43
  44     /* Check the amount of memory is compatible with the SOC */
  45     if (machine->ram_size > FSL_IMX6_MMDC_SIZE) {
  46         error_report("RAM size " RAM_ADDR_FMT " above max supported (%08x)",
  47                      machine->ram_size, FSL_IMX6_MMDC_SIZE);
  48         exit(1);
  49     }
  50
  51     s = FSL_IMX6(object_new(TYPE_FSL_IMX6));
  52     object_property_add_child(OBJECT(machine), "soc", OBJECT(s));
  53
  54     /* Ethernet PHY address is 6 */
  55     object_property_set_int(OBJECT(s), "fec-phy-num", 6, &error_fatal);
  56
  57     qdev_realize(DEVICE(s), NULL, &error_fatal);
  58
  59     memory_region_add_subregion(get_system_memory(), FSL_IMX6_MMDC_ADDR,
  60                                 machine->ram);
  61
  62     {
  63         /*
  64          * TODO: Ideally we would expose the chip select and spi bus on the
  65          * SoC object using alias properties; then we would not need to
  66          * directly access the underlying spi device object.
  67          */
  68         /* Add the sst25vf016b NOR FLASH memory to first SPI */
  69         Object *spi_dev;
  70
  71         spi_dev = object_resolve_path_component(OBJECT(s), "spi1");
  72         if (spi_dev) {
  73             SSIBus *spi_bus;
  74
  75             spi_bus = (SSIBus *)qdev_get_child_bus(DEVICE(spi_dev), "spi");
  76             if (spi_bus) {
  77                 DeviceState *flash_dev;
  78                 qemu_irq cs_line;
  79                 DriveInfo *dinfo = drive_get_next(IF_MTD);
  80
  81                 flash_dev = qdev_new("sst25vf016b");
  82                 if (dinfo) {
  83                     qdev_prop_set_drive_err(flash_dev, "drive",
  84                                             blk_by_legacy_dinfo(dinfo),
  85                                             &error_fatal);
  86                 }
  87                 qdev_realize_and_unref(flash_dev, BUS(spi_bus), &error_fatal);
  88
  89                 cs_line = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
  90                 sysbus_connect_irq(SYS_BUS_DEVICE(spi_dev), 1, cs_line);
  91             }
  92         }
  93     }
  94
  95     sabrelite_binfo.ram_size = machine->ram_size;
  96     sabrelite_binfo.nb_cpus = machine->smp.cpus;
  97     sabrelite_binfo.secure_boot = true;
  98     sabrelite_binfo.write_secondary_boot = sabrelite_write_secondary;
  99     sabrelite_binfo.secondary_cpu_reset_hook = sabrelite_reset_secondary;
 100
 101     if (!qtest_enabled()) {
 102         arm_load_kernel(&s->cpu[0], machine, &sabrelite_binfo);
 103     }
 104 }
 105
 106 static void sabrelite_machine_init(MachineClass *mc)
 107 {
 108     mc->desc = "Freescale i.MX6 Quad SABRE Lite Board (Cortex-A9)";
 109     mc->init = sabrelite_init;
 110     mc->max_cpus = FSL_IMX6_NUM_CPUS;
 111     mc->ignore_memory_transaction_failures = true;
 112     mc->default_ram_id = "sabrelite.ram";
 113 }
 114
 115 DEFINE_MACHINE("sabrelite", sabrelite_machine_init)