include/exec/gdbstub.h

   1 #ifndef GDBSTUB_H
   2 #define GDBSTUB_H
   3
   4 #define DEFAULT_GDBSTUB_PORT "1234"
   5
   6 /* GDB breakpoint/watchpoint types */
   7 #define GDB_BREAKPOINT_SW        0
   8 #define GDB_BREAKPOINT_HW        1
   9 #define GDB_WATCHPOINT_WRITE     2
  10 #define GDB_WATCHPOINT_READ      3
  11 #define GDB_WATCHPOINT_ACCESS    4
  12
  13 #ifdef NEED_CPU_H
  14 #include "cpu.h"
  15
  16 typedef void (*gdb_syscall_complete_cb)(CPUState *cpu,
  17                                         target_ulong ret, target_ulong err);
  18
  19 /**
  20  * gdb_do_syscall:
  21  * @cb: function to call when the system call has completed
  22  * @fmt: gdb syscall format string
  23  * ...: list of arguments to interpolate into @fmt
  24  *
  25  * Send a GDB syscall request. This function will return immediately;
  26  * the callback function will be called later when the remote system
  27  * call has completed.
  28  *
  29  * @fmt should be in the 'call-id,parameter,parameter...' format documented
  30  * for the F request packet in the GDB remote protocol. A limited set of
  31  * printf-style format specifiers is supported:
  32  *   %x  - target_ulong argument printed in hex
  33  *   %lx - 64-bit argument printed in hex
  34  *   %s  - string pointer (target_ulong) and length (int) pair
  35  */
  36 void gdb_do_syscall(gdb_syscall_complete_cb cb, const char *fmt, ...);
  37 /**
  38  * gdb_do_syscallv:
  39  * @cb: function to call when the system call has completed
  40  * @fmt: gdb syscall format string
  41  * @va: arguments to interpolate into @fmt
  42  *
  43  * As gdb_do_syscall, but taking a va_list rather than a variable
  44  * argument list.
  45  */
  46 void gdb_do_syscallv(gdb_syscall_complete_cb cb, const char *fmt, va_list va);
  47 int use_gdb_syscalls(void);
  48 void gdb_set_stop_cpu(CPUState *cpu);
  49 void gdb_exit(CPUArchState *, int);
  50 #ifdef CONFIG_USER_ONLY
  51 /**
  52  * gdb_handlesig: yield control to gdb
  53  * @cpu: CPU
  54  * @sig: if non-zero, the signal number which caused us to stop
  55  *
  56  * This function yields control to gdb, when a user-mode-only target
  57  * needs to stop execution. If @sig is non-zero, then we will send a
  58  * stop packet to tell gdb that we have stopped because of this signal.
  59  *
  60  * This function will block (handling protocol requests from gdb)
  61  * until gdb tells us to continue target execution. When it does
  62  * return, the return value is a signal to deliver to the target,
  63  * or 0 if no signal should be delivered, ie the signal that caused
  64  * us to stop should be ignored.
  65  */
  66 int gdb_handlesig(CPUState *, int);
  67 void gdb_signalled(CPUArchState *, int);
  68 void gdbserver_fork(CPUState *);
  69 #endif
  70 /* Get or set a register.  Returns the size of the register.  */
  71 typedef int (*gdb_get_reg_cb)(CPUArchState *env, GByteArray *buf, int reg);
  72 typedef int (*gdb_set_reg_cb)(CPUArchState *env, uint8_t *buf, int reg);
  73 void gdb_register_coprocessor(CPUState *cpu,
  74                               gdb_get_reg_cb get_reg, gdb_set_reg_cb set_reg,
  75                               int num_regs, const char *xml, int g_pos);
  76
  77 /*
  78  * The GDB remote protocol transfers values in target byte order. As
  79  * the gdbstub may be batching up several register values we always
  80  * append to the array.
  81  */
  82
  83 static inline int gdb_get_reg8(GByteArray *buf, uint8_t val)
  84 {
  85     g_byte_array_append(buf, &val, 1);
  86     return 1;
  87 }
  88
  89 static inline int gdb_get_reg16(GByteArray *buf, uint16_t val)
  90 {
  91     uint16_t to_word = tswap16(val);
  92     g_byte_array_append(buf, (uint8_t *) &to_word, 2);
  93     return 2;
  94 }
  95
  96 static inline int gdb_get_reg32(GByteArray *buf, uint32_t val)
  97 {
  98     uint32_t to_long = tswap32(val);
  99     g_byte_array_append(buf, (uint8_t *) &to_long, 4);
 100     return 4;
 101 }
 102
 103 static inline int gdb_get_reg64(GByteArray *buf, uint64_t val)
 104 {
 105     uint64_t to_quad = tswap64(val);
 106     g_byte_array_append(buf, (uint8_t *) &to_quad, 8);
 107     return 8;
 108 }
 109
 110 static inline int gdb_get_reg128(GByteArray *buf, uint64_t val_hi,
 111                                  uint64_t val_lo)
 112 {
 113     uint64_t to_quad;
 114 #ifdef TARGET_WORDS_BIGENDIAN
 115     to_quad = tswap64(val_hi);
 116     g_byte_array_append(buf, (uint8_t *) &to_quad, 8);
 117     to_quad = tswap64(val_lo);
 118     g_byte_array_append(buf, (uint8_t *) &to_quad, 8);
 119 #else
 120     to_quad = tswap64(val_lo);
 121     g_byte_array_append(buf, (uint8_t *) &to_quad, 8);
 122     to_quad = tswap64(val_hi);
 123     g_byte_array_append(buf, (uint8_t *) &to_quad, 8);
 124 #endif
 125     return 16;
 126 }
 127
 128 static inline int gdb_get_float32(GByteArray *array, float32 val)
 129 {
 130     uint8_t buf[sizeof(CPU_FloatU)];
 131
 132     stfl_p(buf, val);
 133     g_byte_array_append(array, buf, sizeof(buf));
 134
 135     return sizeof(buf);
 136 }
 137
 138 static inline int gdb_get_float64(GByteArray *array, float64 val)
 139 {
 140     uint8_t buf[sizeof(CPU_DoubleU)];
 141
 142     stfq_p(buf, val);
 143     g_byte_array_append(array, buf, sizeof(buf));
 144
 145     return sizeof(buf);
 146 }
 147
 148 static inline int gdb_get_zeroes(GByteArray *array, size_t len)
 149 {
 150     guint oldlen = array->len;
 151     g_byte_array_set_size(array, oldlen + len);
 152     memset(array->data + oldlen, 0, len);
 153
 154     return len;
 155 }
 156
 157 /**
 158  * gdb_get_reg_ptr: get pointer to start of last element
 159  * @len: length of element
 160  *
 161  * This is a helper function to extract the pointer to the last
 162  * element for additional processing. Some front-ends do additional
 163  * dynamic swapping of the elements based on CPU state.
 164  */
 165 static inline uint8_t * gdb_get_reg_ptr(GByteArray *buf, int len)
 166 {
 167     return buf->data + buf->len - len;
 168 }
 169
 170 #if TARGET_LONG_BITS == 64
 171 #define gdb_get_regl(buf, val) gdb_get_reg64(buf, val)
 172 #define ldtul_p(addr) ldq_p(addr)
 173 #else
 174 #define gdb_get_regl(buf, val) gdb_get_reg32(buf, val)
 175 #define ldtul_p(addr) ldl_p(addr)
 176 #endif
 177
 178 #endif
 179
 180 /**
 181  * gdbserver_start: start the gdb server
 182  * @port_or_device: connection spec for gdb
 183  *
 184  * For CONFIG_USER this is either a tcp port or a path to a fifo. For
 185  * system emulation you can use a full chardev spec for your gdbserver
 186  * port.
 187  */
 188 int gdbserver_start(const char *port_or_device);
 189
 190 void gdbserver_cleanup(void);
 191
 192 /**
 193  * gdb_has_xml:
 194  * This is an ugly hack to cope with both new and old gdb.
 195  * If gdb sends qXfer:features:read then assume we're talking to a newish
 196  * gdb that understands target descriptions.
 197  */
 198 extern bool gdb_has_xml;
 199
 200 /* in gdbstub-xml.c, generated by scripts/feature_to_c.sh */
 201 extern const char *const xml_builtin[][2];
 202
 203 #endif