Introduce "xen-save-devices-state"
[qemu/ar7.git] / hw / acpi_piix4.c
blob797ed245fcc768126b74a196846c0ead3a10f2b4
1 /*
2 * ACPI implementation
4 * Copyright (c) 2006 Fabrice Bellard
6 * This library is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU Lesser General Public
8 * License version 2 as published by the Free Software Foundation.
10 * This library is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * Lesser General Public License for more details.
15 * You should have received a copy of the GNU Lesser General Public
16 * License along with this library; if not, see <http://www.gnu.org/licenses/>
18 * Contributions after 2012-01-13 are licensed under the terms of the
19 * GNU GPL, version 2 or (at your option) any later version.
21 #include "hw.h"
22 #include "pc.h"
23 #include "apm.h"
24 #include "pm_smbus.h"
25 #include "pci.h"
26 #include "acpi.h"
27 #include "sysemu.h"
28 #include "range.h"
29 #include "ioport.h"
31 //#define DEBUG
33 #ifdef DEBUG
34 # define PIIX4_DPRINTF(format, ...) printf(format, ## __VA_ARGS__)
35 #else
36 # define PIIX4_DPRINTF(format, ...) do { } while (0)
37 #endif
39 #define ACPI_DBG_IO_ADDR 0xb044
41 #define GPE_BASE 0xafe0
42 #define GPE_LEN 4
43 #define PCI_BASE 0xae00
44 #define PCI_EJ_BASE 0xae08
45 #define PCI_RMV_BASE 0xae0c
47 #define PIIX4_PCI_HOTPLUG_STATUS 2
49 struct pci_status {
50 uint32_t up;
51 uint32_t down;
54 typedef struct PIIX4PMState {
55 PCIDevice dev;
56 IORange ioport;
57 ACPIREGS ar;
59 APMState apm;
61 PMSMBus smb;
62 uint32_t smb_io_base;
64 qemu_irq irq;
65 qemu_irq smi_irq;
66 int kvm_enabled;
67 Notifier machine_ready;
69 /* for pci hotplug */
70 struct pci_status pci0_status;
71 uint32_t pci0_hotplug_enable;
72 } PIIX4PMState;
74 static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s);
76 #define ACPI_ENABLE 0xf1
77 #define ACPI_DISABLE 0xf0
79 static void pm_update_sci(PIIX4PMState *s)
81 int sci_level, pmsts;
83 pmsts = acpi_pm1_evt_get_sts(&s->ar);
84 sci_level = (((pmsts & s->ar.pm1.evt.en) &
85 (ACPI_BITMASK_RT_CLOCK_ENABLE |
86 ACPI_BITMASK_POWER_BUTTON_ENABLE |
87 ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
88 ACPI_BITMASK_TIMER_ENABLE)) != 0) ||
89 (((s->ar.gpe.sts[0] & s->ar.gpe.en[0])
90 & PIIX4_PCI_HOTPLUG_STATUS) != 0);
92 qemu_set_irq(s->irq, sci_level);
93 /* schedule a timer interruption if needed */
94 acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) &&
95 !(pmsts & ACPI_BITMASK_TIMER_STATUS));
98 static void pm_tmr_timer(ACPIREGS *ar)
100 PIIX4PMState *s = container_of(ar, PIIX4PMState, ar);
101 pm_update_sci(s);
104 static void pm_ioport_write(IORange *ioport, uint64_t addr, unsigned width,
105 uint64_t val)
107 PIIX4PMState *s = container_of(ioport, PIIX4PMState, ioport);
109 if (width != 2) {
110 PIIX4_DPRINTF("PM write port=0x%04x width=%d val=0x%08x\n",
111 (unsigned)addr, width, (unsigned)val);
114 switch(addr) {
115 case 0x00:
116 acpi_pm1_evt_write_sts(&s->ar, val);
117 pm_update_sci(s);
118 break;
119 case 0x02:
120 acpi_pm1_evt_write_en(&s->ar, val);
121 pm_update_sci(s);
122 break;
123 case 0x04:
124 acpi_pm1_cnt_write(&s->ar, val);
125 break;
126 default:
127 break;
129 PIIX4_DPRINTF("PM writew port=0x%04x val=0x%04x\n", (unsigned int)addr,
130 (unsigned int)val);
133 static void pm_ioport_read(IORange *ioport, uint64_t addr, unsigned width,
134 uint64_t *data)
136 PIIX4PMState *s = container_of(ioport, PIIX4PMState, ioport);
137 uint32_t val;
139 switch(addr) {
140 case 0x00:
141 val = acpi_pm1_evt_get_sts(&s->ar);
142 break;
143 case 0x02:
144 val = s->ar.pm1.evt.en;
145 break;
146 case 0x04:
147 val = s->ar.pm1.cnt.cnt;
148 break;
149 case 0x08:
150 val = acpi_pm_tmr_get(&s->ar);
151 break;
152 default:
153 val = 0;
154 break;
156 PIIX4_DPRINTF("PM readw port=0x%04x val=0x%04x\n", (unsigned int)addr, val);
157 *data = val;
160 static const IORangeOps pm_iorange_ops = {
161 .read = pm_ioport_read,
162 .write = pm_ioport_write,
165 static void apm_ctrl_changed(uint32_t val, void *arg)
167 PIIX4PMState *s = arg;
169 /* ACPI specs 3.0, 4.7.2.5 */
170 acpi_pm1_cnt_update(&s->ar, val == ACPI_ENABLE, val == ACPI_DISABLE);
172 if (s->dev.config[0x5b] & (1 << 1)) {
173 if (s->smi_irq) {
174 qemu_irq_raise(s->smi_irq);
179 static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val)
181 PIIX4_DPRINTF("ACPI: DBG: 0x%08x\n", val);
184 static void pm_io_space_update(PIIX4PMState *s)
186 uint32_t pm_io_base;
188 if (s->dev.config[0x80] & 1) {
189 pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40));
190 pm_io_base &= 0xffc0;
192 /* XXX: need to improve memory and ioport allocation */
193 PIIX4_DPRINTF("PM: mapping to 0x%x\n", pm_io_base);
194 iorange_init(&s->ioport, &pm_iorange_ops, pm_io_base, 64);
195 ioport_register(&s->ioport);
199 static void pm_write_config(PCIDevice *d,
200 uint32_t address, uint32_t val, int len)
202 pci_default_write_config(d, address, val, len);
203 if (range_covers_byte(address, len, 0x80))
204 pm_io_space_update((PIIX4PMState *)d);
207 static int vmstate_acpi_post_load(void *opaque, int version_id)
209 PIIX4PMState *s = opaque;
211 pm_io_space_update(s);
212 return 0;
215 #define VMSTATE_GPE_ARRAY(_field, _state) \
217 .name = (stringify(_field)), \
218 .version_id = 0, \
219 .num = GPE_LEN, \
220 .info = &vmstate_info_uint16, \
221 .size = sizeof(uint16_t), \
222 .flags = VMS_ARRAY | VMS_POINTER, \
223 .offset = vmstate_offset_pointer(_state, _field, uint8_t), \
226 static const VMStateDescription vmstate_gpe = {
227 .name = "gpe",
228 .version_id = 1,
229 .minimum_version_id = 1,
230 .minimum_version_id_old = 1,
231 .fields = (VMStateField []) {
232 VMSTATE_GPE_ARRAY(sts, ACPIGPE),
233 VMSTATE_GPE_ARRAY(en, ACPIGPE),
234 VMSTATE_END_OF_LIST()
238 static const VMStateDescription vmstate_pci_status = {
239 .name = "pci_status",
240 .version_id = 1,
241 .minimum_version_id = 1,
242 .minimum_version_id_old = 1,
243 .fields = (VMStateField []) {
244 VMSTATE_UINT32(up, struct pci_status),
245 VMSTATE_UINT32(down, struct pci_status),
246 VMSTATE_END_OF_LIST()
250 static const VMStateDescription vmstate_acpi = {
251 .name = "piix4_pm",
252 .version_id = 2,
253 .minimum_version_id = 1,
254 .minimum_version_id_old = 1,
255 .post_load = vmstate_acpi_post_load,
256 .fields = (VMStateField []) {
257 VMSTATE_PCI_DEVICE(dev, PIIX4PMState),
258 VMSTATE_UINT16(ar.pm1.evt.sts, PIIX4PMState),
259 VMSTATE_UINT16(ar.pm1.evt.en, PIIX4PMState),
260 VMSTATE_UINT16(ar.pm1.cnt.cnt, PIIX4PMState),
261 VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState),
262 VMSTATE_TIMER(ar.tmr.timer, PIIX4PMState),
263 VMSTATE_INT64(ar.tmr.overflow_time, PIIX4PMState),
264 VMSTATE_STRUCT(ar.gpe, PIIX4PMState, 2, vmstate_gpe, ACPIGPE),
265 VMSTATE_STRUCT(pci0_status, PIIX4PMState, 2, vmstate_pci_status,
266 struct pci_status),
267 VMSTATE_END_OF_LIST()
271 static void piix4_update_hotplug(PIIX4PMState *s)
273 PCIDevice *dev = &s->dev;
274 BusState *bus = qdev_get_parent_bus(&dev->qdev);
275 DeviceState *qdev, *next;
277 s->pci0_hotplug_enable = ~0;
279 QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
280 PCIDevice *pdev = PCI_DEVICE(qdev);
281 PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(pdev);
282 int slot = PCI_SLOT(pdev->devfn);
284 if (pc->no_hotplug) {
285 s->pci0_hotplug_enable &= ~(1 << slot);
290 static void piix4_reset(void *opaque)
292 PIIX4PMState *s = opaque;
293 uint8_t *pci_conf = s->dev.config;
295 pci_conf[0x58] = 0;
296 pci_conf[0x59] = 0;
297 pci_conf[0x5a] = 0;
298 pci_conf[0x5b] = 0;
300 if (s->kvm_enabled) {
301 /* Mark SMM as already inited (until KVM supports SMM). */
302 pci_conf[0x5B] = 0x02;
304 piix4_update_hotplug(s);
307 static void piix4_powerdown(void *opaque, int irq, int power_failing)
309 PIIX4PMState *s = opaque;
311 assert(s != NULL);
312 acpi_pm1_evt_power_down(&s->ar);
315 static void piix4_pm_machine_ready(Notifier *n, void *opaque)
317 PIIX4PMState *s = container_of(n, PIIX4PMState, machine_ready);
318 uint8_t *pci_conf;
320 pci_conf = s->dev.config;
321 pci_conf[0x5f] = (isa_is_ioport_assigned(0x378) ? 0x80 : 0) | 0x10;
322 pci_conf[0x63] = 0x60;
323 pci_conf[0x67] = (isa_is_ioport_assigned(0x3f8) ? 0x08 : 0) |
324 (isa_is_ioport_assigned(0x2f8) ? 0x90 : 0);
328 static int piix4_pm_initfn(PCIDevice *dev)
330 PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev, dev);
331 uint8_t *pci_conf;
333 pci_conf = s->dev.config;
334 pci_conf[0x06] = 0x80;
335 pci_conf[0x07] = 0x02;
336 pci_conf[0x09] = 0x00;
337 pci_conf[0x3d] = 0x01; // interrupt pin 1
339 pci_conf[0x40] = 0x01; /* PM io base read only bit */
341 /* APM */
342 apm_init(&s->apm, apm_ctrl_changed, s);
344 register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s);
346 if (s->kvm_enabled) {
347 /* Mark SMM as already inited to prevent SMM from running. KVM does not
348 * support SMM mode. */
349 pci_conf[0x5B] = 0x02;
352 /* XXX: which specification is used ? The i82731AB has different
353 mappings */
354 pci_conf[0x90] = s->smb_io_base | 1;
355 pci_conf[0x91] = s->smb_io_base >> 8;
356 pci_conf[0xd2] = 0x09;
357 register_ioport_write(s->smb_io_base, 64, 1, smb_ioport_writeb, &s->smb);
358 register_ioport_read(s->smb_io_base, 64, 1, smb_ioport_readb, &s->smb);
360 acpi_pm_tmr_init(&s->ar, pm_tmr_timer);
361 acpi_gpe_init(&s->ar, GPE_LEN);
363 qemu_system_powerdown = *qemu_allocate_irqs(piix4_powerdown, s, 1);
365 pm_smbus_init(&s->dev.qdev, &s->smb);
366 s->machine_ready.notify = piix4_pm_machine_ready;
367 qemu_add_machine_init_done_notifier(&s->machine_ready);
368 qemu_register_reset(piix4_reset, s);
369 piix4_acpi_system_hot_add_init(dev->bus, s);
371 return 0;
374 i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
375 qemu_irq sci_irq, qemu_irq smi_irq,
376 int kvm_enabled)
378 PCIDevice *dev;
379 PIIX4PMState *s;
381 dev = pci_create(bus, devfn, "PIIX4_PM");
382 qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
384 s = DO_UPCAST(PIIX4PMState, dev, dev);
385 s->irq = sci_irq;
386 acpi_pm1_cnt_init(&s->ar);
387 s->smi_irq = smi_irq;
388 s->kvm_enabled = kvm_enabled;
390 qdev_init_nofail(&dev->qdev);
392 return s->smb.smbus;
395 static Property piix4_pm_properties[] = {
396 DEFINE_PROP_UINT32("smb_io_base", PIIX4PMState, smb_io_base, 0),
397 DEFINE_PROP_END_OF_LIST(),
400 static void piix4_pm_class_init(ObjectClass *klass, void *data)
402 DeviceClass *dc = DEVICE_CLASS(klass);
403 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
405 k->no_hotplug = 1;
406 k->init = piix4_pm_initfn;
407 k->config_write = pm_write_config;
408 k->vendor_id = PCI_VENDOR_ID_INTEL;
409 k->device_id = PCI_DEVICE_ID_INTEL_82371AB_3;
410 k->revision = 0x03;
411 k->class_id = PCI_CLASS_BRIDGE_OTHER;
412 dc->desc = "PM";
413 dc->no_user = 1;
414 dc->vmsd = &vmstate_acpi;
415 dc->props = piix4_pm_properties;
418 static TypeInfo piix4_pm_info = {
419 .name = "PIIX4_PM",
420 .parent = TYPE_PCI_DEVICE,
421 .instance_size = sizeof(PIIX4PMState),
422 .class_init = piix4_pm_class_init,
425 static void piix4_pm_register_types(void)
427 type_register_static(&piix4_pm_info);
430 type_init(piix4_pm_register_types)
432 static uint32_t gpe_readb(void *opaque, uint32_t addr)
434 PIIX4PMState *s = opaque;
435 uint32_t val = acpi_gpe_ioport_readb(&s->ar, addr);
437 PIIX4_DPRINTF("gpe read %x == %x\n", addr, val);
438 return val;
441 static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
443 PIIX4PMState *s = opaque;
445 acpi_gpe_ioport_writeb(&s->ar, addr, val);
446 pm_update_sci(s);
448 PIIX4_DPRINTF("gpe write %x <== %d\n", addr, val);
451 static uint32_t pcihotplug_read(void *opaque, uint32_t addr)
453 uint32_t val = 0;
454 struct pci_status *g = opaque;
455 switch (addr) {
456 case PCI_BASE:
457 val = g->up;
458 break;
459 case PCI_BASE + 4:
460 val = g->down;
461 break;
462 default:
463 break;
466 PIIX4_DPRINTF("pcihotplug read %x == %x\n", addr, val);
467 return val;
470 static void pcihotplug_write(void *opaque, uint32_t addr, uint32_t val)
472 struct pci_status *g = opaque;
473 switch (addr) {
474 case PCI_BASE:
475 g->up = val;
476 break;
477 case PCI_BASE + 4:
478 g->down = val;
479 break;
482 PIIX4_DPRINTF("pcihotplug write %x <== %d\n", addr, val);
485 static uint32_t pciej_read(void *opaque, uint32_t addr)
487 PIIX4_DPRINTF("pciej read %x\n", addr);
488 return 0;
491 static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
493 BusState *bus = opaque;
494 DeviceState *qdev, *next;
495 int slot = ffs(val) - 1;
497 QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
498 PCIDevice *dev = PCI_DEVICE(qdev);
499 PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
500 if (PCI_SLOT(dev->devfn) == slot && !pc->no_hotplug) {
501 qdev_free(qdev);
506 PIIX4_DPRINTF("pciej write %x <== %d\n", addr, val);
509 static uint32_t pcirmv_read(void *opaque, uint32_t addr)
511 PIIX4PMState *s = opaque;
513 return s->pci0_hotplug_enable;
516 static void pcirmv_write(void *opaque, uint32_t addr, uint32_t val)
518 return;
521 static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
522 PCIHotplugState state);
524 static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
526 struct pci_status *pci0_status = &s->pci0_status;
528 register_ioport_write(GPE_BASE, GPE_LEN, 1, gpe_writeb, s);
529 register_ioport_read(GPE_BASE, GPE_LEN, 1, gpe_readb, s);
530 acpi_gpe_blk(&s->ar, GPE_BASE);
532 register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, pci0_status);
533 register_ioport_read(PCI_BASE, 8, 4, pcihotplug_read, pci0_status);
535 register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus);
536 register_ioport_read(PCI_EJ_BASE, 4, 4, pciej_read, bus);
538 register_ioport_write(PCI_RMV_BASE, 4, 4, pcirmv_write, s);
539 register_ioport_read(PCI_RMV_BASE, 4, 4, pcirmv_read, s);
541 pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev);
544 static void enable_device(PIIX4PMState *s, int slot)
546 s->ar.gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS;
547 s->pci0_status.up |= (1 << slot);
550 static void disable_device(PIIX4PMState *s, int slot)
552 s->ar.gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS;
553 s->pci0_status.down |= (1 << slot);
556 static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
557 PCIHotplugState state)
559 int slot = PCI_SLOT(dev->devfn);
560 PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev,
561 PCI_DEVICE(qdev));
563 /* Don't send event when device is enabled during qemu machine creation:
564 * it is present on boot, no hotplug event is necessary. We do send an
565 * event when the device is disabled later. */
566 if (state == PCI_COLDPLUG_ENABLED) {
567 return 0;
570 s->pci0_status.up = 0;
571 s->pci0_status.down = 0;
572 if (state == PCI_HOTPLUG_ENABLED) {
573 enable_device(s, slot);
574 } else {
575 disable_device(s, slot);
578 pm_update_sci(s);
580 return 0;