2 * QEMU PReP System I/O emulation
4 * Copyright (c) 2017 Hervé Poussineau
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
25 #include "qemu/osdep.h"
26 #include "hw/isa/isa.h"
27 #include "exec/address-spaces.h"
28 #include "qemu/error-report.h" /* for error_report() */
29 #include "sysemu/sysemu.h" /* for vm_stop() */
33 #define TYPE_PREP_SYSTEMIO "prep-systemio"
34 #define PREP_SYSTEMIO(obj) \
35 OBJECT_CHECK(PrepSystemIoState, (obj), TYPE_PREP_SYSTEMIO)
37 /* Bit as defined in PowerPC Reference Plaform v1.1, sect. 6.1.5, p. 132 */
38 #define PREP_BIT(n) (1 << (7 - (n)))
40 typedef struct PrepSystemIoState
{
42 MemoryRegion ppc_parity_mem
;
44 qemu_irq non_contiguous_io_map_irq
;
45 uint8_t sreset
; /* 0x0092 */
46 uint8_t equipment
; /* 0x080c */
47 uint8_t system_control
; /* 0x081c */
48 uint8_t iomap_type
; /* 0x0850 */
49 uint8_t ibm_planar_id
; /* 0x0852 */
50 qemu_irq softreset_irq
;
54 /* PORT 0092 -- Special Port 92 (Read/Write) */
57 PORT0092_SOFTRESET
= PREP_BIT(7),
58 PORT0092_LE_MODE
= PREP_BIT(6),
61 static void prep_port0092_write(void *opaque
, uint32_t addr
, uint32_t val
)
63 PrepSystemIoState
*s
= opaque
;
65 trace_prep_systemio_write(addr
, val
);
67 s
->sreset
= val
& PORT0092_SOFTRESET
;
68 qemu_set_irq(s
->softreset_irq
, s
->sreset
);
70 if ((val
& PORT0092_LE_MODE
) != 0) {
71 /* XXX Not supported yet */
72 error_report("little-endian mode not supported");
73 vm_stop(RUN_STATE_PAUSED
);
79 static uint32_t prep_port0092_read(void *opaque
, uint32_t addr
)
81 PrepSystemIoState
*s
= opaque
;
82 trace_prep_systemio_read(addr
, s
->sreset
);
86 /* PORT 0808 -- Hardfile Light Register (Write Only) */
89 PORT0808_HARDFILE_LIGHT_ON
= PREP_BIT(7),
92 static void prep_port0808_write(void *opaque
, uint32_t addr
, uint32_t val
)
94 trace_prep_systemio_write(addr
, val
);
97 /* PORT 0810 -- Password Protect 1 Register (Write Only) */
99 /* reset by port 0x4D in the SIO */
100 static void prep_port0810_write(void *opaque
, uint32_t addr
, uint32_t val
)
102 trace_prep_systemio_write(addr
, val
);
105 /* PORT 0812 -- Password Protect 2 Register (Write Only) */
107 /* reset by port 0x4D in the SIO */
108 static void prep_port0812_write(void *opaque
, uint32_t addr
, uint32_t val
)
110 trace_prep_systemio_write(addr
, val
);
113 /* PORT 0814 -- L2 Invalidate Register (Write Only) */
115 static void prep_port0814_write(void *opaque
, uint32_t addr
, uint32_t val
)
117 trace_prep_systemio_write(addr
, val
);
120 /* PORT 0818 -- Reserved for Keylock (Read Only) */
123 PORT0818_KEYLOCK_SIGNAL_HIGH
= PREP_BIT(7),
126 static uint32_t prep_port0818_read(void *opaque
, uint32_t addr
)
129 trace_prep_systemio_read(addr
, val
);
133 /* PORT 080C -- Equipment */
136 PORT080C_SCSIFUSE
= PREP_BIT(1),
137 PORT080C_L2_COPYBACK
= PREP_BIT(4),
138 PORT080C_L2_256
= PREP_BIT(5),
139 PORT080C_UPGRADE_CPU
= PREP_BIT(6),
140 PORT080C_L2
= PREP_BIT(7),
143 static uint32_t prep_port080c_read(void *opaque
, uint32_t addr
)
145 PrepSystemIoState
*s
= opaque
;
146 trace_prep_systemio_read(addr
, s
->equipment
);
150 /* PORT 081C -- System Control Register (Read/Write) */
153 PORT081C_FLOPPY_MOTOR_INHIBIT
= PREP_BIT(3),
154 PORT081C_MASK_TEA
= PREP_BIT(2),
155 PORT081C_L2_UPDATE_INHIBIT
= PREP_BIT(1),
156 PORT081C_L2_CACHEMISS_INHIBIT
= PREP_BIT(0),
159 static void prep_port081c_write(void *opaque
, uint32_t addr
, uint32_t val
)
161 static const uint8_t mask
= PORT081C_FLOPPY_MOTOR_INHIBIT
|
163 PORT081C_L2_UPDATE_INHIBIT
|
164 PORT081C_L2_CACHEMISS_INHIBIT
;
165 PrepSystemIoState
*s
= opaque
;
166 trace_prep_systemio_write(addr
, val
);
167 s
->system_control
= val
& mask
;
170 static uint32_t prep_port081c_read(void *opaque
, uint32_t addr
)
172 PrepSystemIoState
*s
= opaque
;
173 trace_prep_systemio_read(addr
, s
->system_control
);
174 return s
->system_control
;
177 /* System Board Identification */
179 static uint32_t prep_port0852_read(void *opaque
, uint32_t addr
)
181 PrepSystemIoState
*s
= opaque
;
182 trace_prep_systemio_read(addr
, s
->ibm_planar_id
);
183 return s
->ibm_planar_id
;
186 /* PORT 0850 -- I/O Map Type Register (Read/Write) */
189 PORT0850_IOMAP_NONCONTIGUOUS
= PREP_BIT(7),
192 static uint32_t prep_port0850_read(void *opaque
, uint32_t addr
)
194 PrepSystemIoState
*s
= opaque
;
195 trace_prep_systemio_read(addr
, s
->iomap_type
);
196 return s
->iomap_type
;
199 static void prep_port0850_write(void *opaque
, uint32_t addr
, uint32_t val
)
201 PrepSystemIoState
*s
= opaque
;
203 trace_prep_systemio_write(addr
, val
);
204 qemu_set_irq(s
->non_contiguous_io_map_irq
,
205 val
& PORT0850_IOMAP_NONCONTIGUOUS
);
206 s
->iomap_type
= val
& PORT0850_IOMAP_NONCONTIGUOUS
;
209 static const MemoryRegionPortio ppc_io800_port_list
[] = {
210 { 0x092, 1, 1, .read
= prep_port0092_read
,
211 .write
= prep_port0092_write
, },
212 { 0x808, 1, 1, .write
= prep_port0808_write
, },
213 { 0x80c, 1, 1, .read
= prep_port080c_read
, },
214 { 0x810, 1, 1, .write
= prep_port0810_write
, },
215 { 0x812, 1, 1, .write
= prep_port0812_write
, },
216 { 0x814, 1, 1, .write
= prep_port0814_write
, },
217 { 0x818, 1, 1, .read
= prep_port0818_read
},
218 { 0x81c, 1, 1, .read
= prep_port081c_read
,
219 .write
= prep_port081c_write
, },
220 { 0x850, 1, 1, .read
= prep_port0850_read
,
221 .write
= prep_port0850_write
, },
222 { 0x852, 1, 1, .read
= prep_port0852_read
, },
226 static uint64_t ppc_parity_error_readl(void *opaque
, hwaddr addr
,
230 trace_prep_systemio_read((unsigned int)addr
, val
);
234 static const MemoryRegionOps ppc_parity_error_ops
= {
235 .read
= ppc_parity_error_readl
,
237 .min_access_size
= 4,
238 .max_access_size
= 4,
242 static void prep_systemio_realize(DeviceState
*dev
, Error
**errp
)
244 ISADevice
*isa
= ISA_DEVICE(dev
);
245 PrepSystemIoState
*s
= PREP_SYSTEMIO(dev
);
248 qdev_init_gpio_out(dev
, &s
->non_contiguous_io_map_irq
, 1);
249 s
->iomap_type
= PORT0850_IOMAP_NONCONTIGUOUS
;
250 qemu_set_irq(s
->non_contiguous_io_map_irq
,
251 s
->iomap_type
& PORT0850_IOMAP_NONCONTIGUOUS
);
252 cpu
= POWERPC_CPU(first_cpu
);
253 s
->softreset_irq
= cpu
->env
.irq_inputs
[PPC6xx_INPUT_HRESET
];
255 isa_register_portio_list(isa
, &s
->portio
, 0x0, ppc_io800_port_list
, s
,
258 memory_region_init_io(&s
->ppc_parity_mem
, OBJECT(dev
),
259 &ppc_parity_error_ops
, s
, "ppc-parity", 0x4);
260 memory_region_add_subregion(get_system_memory(), 0xbfffeff0,
264 static const VMStateDescription vmstate_prep_systemio
= {
265 .name
= "prep_systemio",
267 .minimum_version_id
= 1,
268 .fields
= (VMStateField
[]) {
269 VMSTATE_UINT8(sreset
, PrepSystemIoState
),
270 VMSTATE_UINT8(system_control
, PrepSystemIoState
),
271 VMSTATE_UINT8(iomap_type
, PrepSystemIoState
),
272 VMSTATE_END_OF_LIST()
276 static Property prep_systemio_properties
[] = {
277 DEFINE_PROP_UINT8("ibm-planar-id", PrepSystemIoState
, ibm_planar_id
, 0),
278 DEFINE_PROP_UINT8("equipment", PrepSystemIoState
, equipment
, 0),
279 DEFINE_PROP_END_OF_LIST()
282 static void prep_systemio_class_initfn(ObjectClass
*klass
, void *data
)
284 DeviceClass
*dc
= DEVICE_CLASS(klass
);
286 dc
->realize
= prep_systemio_realize
;
287 dc
->vmsd
= &vmstate_prep_systemio
;
288 dc
->props
= prep_systemio_properties
;
291 static TypeInfo prep_systemio800_info
= {
292 .name
= TYPE_PREP_SYSTEMIO
,
293 .parent
= TYPE_ISA_DEVICE
,
294 .instance_size
= sizeof(PrepSystemIoState
),
295 .class_init
= prep_systemio_class_initfn
,
298 static void prep_systemio_register_types(void)
300 type_register_static(&prep_systemio800_info
);
303 type_init(prep_systemio_register_types
)