bsd-user/qemu.h

   1 /*
   2  *  qemu bsd user mode definition
   3  *
   4  *  This program is free software; you can redistribute it and/or modify
   5  *  it under the terms of the GNU General Public License as published by
   6  *  the Free Software Foundation; either version 2 of the License, or
   7  *  (at your option) any later version.
   8  *
   9  *  This program is distributed in the hope that it will be useful,
  10  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  *  GNU General Public License for more details.
  13  *
  14  *  You should have received a copy of the GNU General Public License
  15  *  along with this program; if not, see <http://www.gnu.org/licenses/>.
  16  */
  17 #ifndef QEMU_H
  18 #define QEMU_H
  19
  20
  21 #include "cpu.h"
  22 #include "exec/exec-all.h"
  23 #include "exec/cpu_ldst.h"
  24
  25 #undef DEBUG_REMAP
  26 #ifdef DEBUG_REMAP
  27 #endif /* DEBUG_REMAP */
  28
  29 #include "exec/user/abitypes.h"
  30
  31 enum BSDType {
  32     target_freebsd,
  33     target_netbsd,
  34     target_openbsd,
  35 };
  36 extern enum BSDType bsd_type;
  37
  38 #include "syscall_defs.h"
  39 #include "target_syscall.h"
  40 #include "target_signal.h"
  41 #include "exec/gdbstub.h"
  42
  43 #if defined(CONFIG_USE_NPTL)
  44 #define THREAD __thread
  45 #else
  46 #define THREAD
  47 #endif
  48
  49 /* This struct is used to hold certain information about the image.
  50  * Basically, it replicates in user space what would be certain
  51  * task_struct fields in the kernel
  52  */
  53 struct image_info {
  54     abi_ulong load_addr;
  55     abi_ulong start_code;
  56     abi_ulong end_code;
  57     abi_ulong start_data;
  58     abi_ulong end_data;
  59     abi_ulong start_brk;
  60     abi_ulong brk;
  61     abi_ulong start_mmap;
  62     abi_ulong mmap;
  63     abi_ulong rss;
  64     abi_ulong start_stack;
  65     abi_ulong entry;
  66     abi_ulong code_offset;
  67     abi_ulong data_offset;
  68     int       personality;
  69 };
  70
  71 #define MAX_SIGQUEUE_SIZE 1024
  72
  73 struct sigqueue {
  74     struct sigqueue *next;
  75     //target_siginfo_t info;
  76 };
  77
  78 struct emulated_sigtable {
  79     int pending; /* true if signal is pending */
  80     struct sigqueue *first;
  81     struct sigqueue info; /* in order to always have memory for the
  82                              first signal, we put it here */
  83 };
  84
  85 /* NOTE: we force a big alignment so that the stack stored after is
  86    aligned too */
  87 typedef struct TaskState {
  88     pid_t ts_tid;     /* tid (or pid) of this task */
  89
  90     struct TaskState *next;
  91     int used; /* non zero if used */
  92     struct image_info *info;
  93
  94     struct emulated_sigtable sigtab[TARGET_NSIG];
  95     struct sigqueue sigqueue_table[MAX_SIGQUEUE_SIZE]; /* siginfo queue */
  96     struct sigqueue *first_free; /* first free siginfo queue entry */
  97     int signal_pending; /* non zero if a signal may be pending */
  98
  99     uint8_t stack[0];
 100 } __attribute__((aligned(16))) TaskState;
 101
 102 void init_task_state(TaskState *ts);
 103 extern const char *qemu_uname_release;
 104 extern unsigned long mmap_min_addr;
 105
 106 /* ??? See if we can avoid exposing so much of the loader internals.  */
 107 /*
 108  * MAX_ARG_PAGES defines the number of pages allocated for arguments
 109  * and envelope for the new program. 32 should suffice, this gives
 110  * a maximum env+arg of 128kB w/4KB pages!
 111  */
 112 #define MAX_ARG_PAGES 32
 113
 114 /*
 115  * This structure is used to hold the arguments that are
 116  * used when loading binaries.
 117  */
 118 struct linux_binprm {
 119         char buf[128];
 120         void *page[MAX_ARG_PAGES];
 121         abi_ulong p;
 122         int fd;
 123         int e_uid, e_gid;
 124         int argc, envc;
 125         char **argv;
 126         char **envp;
 127         char * filename;        /* Name of binary */
 128 };
 129
 130 void do_init_thread(struct target_pt_regs *regs, struct image_info *infop);
 131 abi_ulong loader_build_argptr(int envc, int argc, abi_ulong sp,
 132                               abi_ulong stringp, int push_ptr);
 133 int loader_exec(const char * filename, char ** argv, char ** envp,
 134              struct target_pt_regs * regs, struct image_info *infop);
 135
 136 int load_elf_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,
 137                     struct image_info * info);
 138 int load_flt_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,
 139                     struct image_info * info);
 140
 141 abi_long memcpy_to_target(abi_ulong dest, const void *src,
 142                           unsigned long len);
 143 void target_set_brk(abi_ulong new_brk);
 144 abi_long do_brk(abi_ulong new_brk);
 145 void syscall_init(void);
 146 abi_long do_freebsd_syscall(void *cpu_env, int num, abi_long arg1,
 147                             abi_long arg2, abi_long arg3, abi_long arg4,
 148                             abi_long arg5, abi_long arg6, abi_long arg7,
 149                             abi_long arg8);
 150 abi_long do_netbsd_syscall(void *cpu_env, int num, abi_long arg1,
 151                            abi_long arg2, abi_long arg3, abi_long arg4,
 152                            abi_long arg5, abi_long arg6);
 153 abi_long do_openbsd_syscall(void *cpu_env, int num, abi_long arg1,
 154                             abi_long arg2, abi_long arg3, abi_long arg4,
 155                             abi_long arg5, abi_long arg6);
 156 void gemu_log(const char *fmt, ...) GCC_FMT_ATTR(1, 2);
 157 extern THREAD CPUState *thread_cpu;
 158 void cpu_loop(CPUArchState *env);
 159 char *target_strerror(int err);
 160 int get_osversion(void);
 161 void fork_start(void);
 162 void fork_end(int child);
 163
 164 #include "qemu/log.h"
 165
 166 /* strace.c */
 167 struct syscallname {
 168     int nr;
 169     const char *name;
 170     const char *format;
 171     void (*call)(const struct syscallname *,
 172                  abi_long, abi_long, abi_long,
 173                  abi_long, abi_long, abi_long);
 174     void (*result)(const struct syscallname *, abi_long);
 175 };
 176
 177 void
 178 print_freebsd_syscall(int num,
 179                       abi_long arg1, abi_long arg2, abi_long arg3,
 180                       abi_long arg4, abi_long arg5, abi_long arg6);
 181 void print_freebsd_syscall_ret(int num, abi_long ret);
 182 void
 183 print_netbsd_syscall(int num,
 184                      abi_long arg1, abi_long arg2, abi_long arg3,
 185                      abi_long arg4, abi_long arg5, abi_long arg6);
 186 void print_netbsd_syscall_ret(int num, abi_long ret);
 187 void
 188 print_openbsd_syscall(int num,
 189                       abi_long arg1, abi_long arg2, abi_long arg3,
 190                       abi_long arg4, abi_long arg5, abi_long arg6);
 191 void print_openbsd_syscall_ret(int num, abi_long ret);
 192 extern int do_strace;
 193
 194 /* signal.c */
 195 void process_pending_signals(CPUArchState *cpu_env);
 196 void signal_init(void);
 197 //int queue_signal(CPUArchState *env, int sig, target_siginfo_t *info);
 198 //void host_to_target_siginfo(target_siginfo_t *tinfo, const siginfo_t *info);
 199 //void target_to_host_siginfo(siginfo_t *info, const target_siginfo_t *tinfo);
 200 long do_sigreturn(CPUArchState *env);
 201 long do_rt_sigreturn(CPUArchState *env);
 202 abi_long do_sigaltstack(abi_ulong uss_addr, abi_ulong uoss_addr, abi_ulong sp);
 203
 204 /* mmap.c */
 205 int target_mprotect(abi_ulong start, abi_ulong len, int prot);
 206 abi_long target_mmap(abi_ulong start, abi_ulong len, int prot,
 207                      int flags, int fd, abi_ulong offset);
 208 int target_munmap(abi_ulong start, abi_ulong len);
 209 abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size,
 210                        abi_ulong new_size, unsigned long flags,
 211                        abi_ulong new_addr);
 212 int target_msync(abi_ulong start, abi_ulong len, int flags);
 213 extern unsigned long last_brk;
 214 void mmap_fork_start(void);
 215 void mmap_fork_end(int child);
 216
 217 /* main.c */
 218 extern unsigned long x86_stack_size;
 219
 220 /* user access */
 221
 222 #define VERIFY_READ 0
 223 #define VERIFY_WRITE 1 /* implies read access */
 224
 225 static inline int access_ok(int type, abi_ulong addr, abi_ulong size)
 226 {
 227     return page_check_range((target_ulong)addr, size,
 228                             (type == VERIFY_READ) ? PAGE_READ : (PAGE_READ | PAGE_WRITE)) == 0;
 229 }
 230
 231 /* NOTE __get_user and __put_user use host pointers and don't check access. */
 232 /* These are usually used to access struct data members once the
 233  * struct has been locked - usually with lock_user_struct().
 234  */
 235 #define __put_user(x, hptr)\
 236 ({\
 237     int size = sizeof(*hptr);\
 238     switch(size) {\
 239     case 1:\
 240         *(uint8_t *)(hptr) = (uint8_t)(typeof(*hptr))(x);\
 241         break;\
 242     case 2:\
 243         *(uint16_t *)(hptr) = tswap16((typeof(*hptr))(x));\
 244         break;\
 245     case 4:\
 246         *(uint32_t *)(hptr) = tswap32((typeof(*hptr))(x));\
 247         break;\
 248     case 8:\
 249         *(uint64_t *)(hptr) = tswap64((typeof(*hptr))(x));\
 250         break;\
 251     default:\
 252         abort();\
 253     }\
 254     0;\
 255 })
 256
 257 #define __get_user(x, hptr) \
 258 ({\
 259     int size = sizeof(*hptr);\
 260     switch(size) {\
 261     case 1:\
 262         x = (typeof(*hptr))*(uint8_t *)(hptr);\
 263         break;\
 264     case 2:\
 265         x = (typeof(*hptr))tswap16(*(uint16_t *)(hptr));\
 266         break;\
 267     case 4:\
 268         x = (typeof(*hptr))tswap32(*(uint32_t *)(hptr));\
 269         break;\
 270     case 8:\
 271         x = (typeof(*hptr))tswap64(*(uint64_t *)(hptr));\
 272         break;\
 273     default:\
 274         /* avoid warning */\
 275         x = 0;\
 276         abort();\
 277     }\
 278     0;\
 279 })
 280
 281 /* put_user()/get_user() take a guest address and check access */
 282 /* These are usually used to access an atomic data type, such as an int,
 283  * that has been passed by address.  These internally perform locking
 284  * and unlocking on the data type.
 285  */
 286 #define put_user(x, gaddr, target_type)                                 \
 287 ({                                                                      \
 288     abi_ulong __gaddr = (gaddr);                                        \
 289     target_type *__hptr;                                                \
 290     abi_long __ret;                                                     \
 291     if ((__hptr = lock_user(VERIFY_WRITE, __gaddr, sizeof(target_type), 0))) { \
 292         __ret = __put_user((x), __hptr);                                \
 293         unlock_user(__hptr, __gaddr, sizeof(target_type));              \
 294     } else                                                              \
 295         __ret = -TARGET_EFAULT;                                         \
 296     __ret;                                                              \
 297 })
 298
 299 #define get_user(x, gaddr, target_type)                                 \
 300 ({                                                                      \
 301     abi_ulong __gaddr = (gaddr);                                        \
 302     target_type *__hptr;                                                \
 303     abi_long __ret;                                                     \
 304     if ((__hptr = lock_user(VERIFY_READ, __gaddr, sizeof(target_type), 1))) { \
 305         __ret = __get_user((x), __hptr);                                \
 306         unlock_user(__hptr, __gaddr, 0);                                \
 307     } else {                                                            \
 308         /* avoid warning */                                             \
 309         (x) = 0;                                                        \
 310         __ret = -TARGET_EFAULT;                                         \
 311     }                                                                   \
 312     __ret;                                                              \
 313 })
 314
 315 #define put_user_ual(x, gaddr) put_user((x), (gaddr), abi_ulong)
 316 #define put_user_sal(x, gaddr) put_user((x), (gaddr), abi_long)
 317 #define put_user_u64(x, gaddr) put_user((x), (gaddr), uint64_t)
 318 #define put_user_s64(x, gaddr) put_user((x), (gaddr), int64_t)
 319 #define put_user_u32(x, gaddr) put_user((x), (gaddr), uint32_t)
 320 #define put_user_s32(x, gaddr) put_user((x), (gaddr), int32_t)
 321 #define put_user_u16(x, gaddr) put_user((x), (gaddr), uint16_t)
 322 #define put_user_s16(x, gaddr) put_user((x), (gaddr), int16_t)
 323 #define put_user_u8(x, gaddr)  put_user((x), (gaddr), uint8_t)
 324 #define put_user_s8(x, gaddr)  put_user((x), (gaddr), int8_t)
 325
 326 #define get_user_ual(x, gaddr) get_user((x), (gaddr), abi_ulong)
 327 #define get_user_sal(x, gaddr) get_user((x), (gaddr), abi_long)
 328 #define get_user_u64(x, gaddr) get_user((x), (gaddr), uint64_t)
 329 #define get_user_s64(x, gaddr) get_user((x), (gaddr), int64_t)
 330 #define get_user_u32(x, gaddr) get_user((x), (gaddr), uint32_t)
 331 #define get_user_s32(x, gaddr) get_user((x), (gaddr), int32_t)
 332 #define get_user_u16(x, gaddr) get_user((x), (gaddr), uint16_t)
 333 #define get_user_s16(x, gaddr) get_user((x), (gaddr), int16_t)
 334 #define get_user_u8(x, gaddr)  get_user((x), (gaddr), uint8_t)
 335 #define get_user_s8(x, gaddr)  get_user((x), (gaddr), int8_t)
 336
 337 /* copy_from_user() and copy_to_user() are usually used to copy data
 338  * buffers between the target and host.  These internally perform
 339  * locking/unlocking of the memory.
 340  */
 341 abi_long copy_from_user(void *hptr, abi_ulong gaddr, size_t len);
 342 abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len);
 343
 344 /* Functions for accessing guest memory.  The tget and tput functions
 345    read/write single values, byteswapping as necessary.  The lock_user function
 346    gets a pointer to a contiguous area of guest memory, but does not perform
 347    any byteswapping.  lock_user may return either a pointer to the guest
 348    memory, or a temporary buffer.  */
 349
 350 /* Lock an area of guest memory into the host.  If copy is true then the
 351    host area will have the same contents as the guest.  */
 352 static inline void *lock_user(int type, abi_ulong guest_addr, long len, int copy)
 353 {
 354     if (!access_ok(type, guest_addr, len))
 355         return NULL;
 356 #ifdef DEBUG_REMAP
 357     {
 358         void *addr;
 359         addr = g_malloc(len);
 360         if (copy)
 361             memcpy(addr, g2h(guest_addr), len);
 362         else
 363             memset(addr, 0, len);
 364         return addr;
 365     }
 366 #else
 367     return g2h(guest_addr);
 368 #endif
 369 }
 370
 371 /* Unlock an area of guest memory.  The first LEN bytes must be
 372    flushed back to guest memory. host_ptr = NULL is explicitly
 373    allowed and does nothing. */
 374 static inline void unlock_user(void *host_ptr, abi_ulong guest_addr,
 375                                long len)
 376 {
 377
 378 #ifdef DEBUG_REMAP
 379     if (!host_ptr)
 380         return;
 381     if (host_ptr == g2h(guest_addr))
 382         return;
 383     if (len > 0)
 384         memcpy(g2h(guest_addr), host_ptr, len);
 385     g_free(host_ptr);
 386 #endif
 387 }
 388
 389 /* Return the length of a string in target memory or -TARGET_EFAULT if
 390    access error. */
 391 abi_long target_strlen(abi_ulong gaddr);
 392
 393 /* Like lock_user but for null terminated strings.  */
 394 static inline void *lock_user_string(abi_ulong guest_addr)
 395 {
 396     abi_long len;
 397     len = target_strlen(guest_addr);
 398     if (len < 0)
 399         return NULL;
 400     return lock_user(VERIFY_READ, guest_addr, (long)(len + 1), 1);
 401 }
 402
 403 /* Helper macros for locking/unlocking a target struct.  */
 404 #define lock_user_struct(type, host_ptr, guest_addr, copy)      \
 405     (host_ptr = lock_user(type, guest_addr, sizeof(*host_ptr), copy))
 406 #define unlock_user_struct(host_ptr, guest_addr, copy)          \
 407     unlock_user(host_ptr, guest_addr, (copy) ? sizeof(*host_ptr) : 0)
 408
 409 #if defined(CONFIG_USE_NPTL)
 410 #include <pthread.h>
 411 #endif
 412
 413 #endif /* QEMU_H */