2 * vhost_scsi host device
4 * Copyright IBM, Corp. 2011
7 * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
9 * Changes for QEMU mainline + tcm_vhost kernel upstream:
10 * Nicholas Bellinger <nab@risingtidesystems.com>
12 * This work is licensed under the terms of the GNU LGPL, version 2 or later.
13 * See the COPYING.LIB file in the top-level directory.
17 #include "qemu/osdep.h"
18 #include <linux/vhost.h>
19 #include <sys/ioctl.h>
20 #include "qapi/error.h"
21 #include "qemu/error-report.h"
22 #include "qemu/queue.h"
23 #include "monitor/monitor.h"
24 #include "migration/migration.h"
25 #include "hw/virtio/vhost-scsi.h"
26 #include "hw/virtio/vhost.h"
27 #include "hw/virtio/virtio-scsi.h"
28 #include "hw/virtio/virtio-bus.h"
29 #include "hw/virtio/virtio-access.h"
30 #include "hw/fw-path-provider.h"
31 #include "qemu/cutils.h"
33 /* Features supported by host kernel. */
34 static const int kernel_feature_bits
[] = {
35 VIRTIO_F_NOTIFY_ON_EMPTY
,
36 VIRTIO_RING_F_INDIRECT_DESC
,
37 VIRTIO_RING_F_EVENT_IDX
,
38 VIRTIO_SCSI_F_HOTPLUG
,
39 VHOST_INVALID_FEATURE_BIT
42 static int vhost_scsi_set_endpoint(VHostSCSI
*s
)
44 VirtIOSCSICommon
*vs
= VIRTIO_SCSI_COMMON(s
);
45 const VhostOps
*vhost_ops
= s
->dev
.vhost_ops
;
46 struct vhost_scsi_target backend
;
49 memset(&backend
, 0, sizeof(backend
));
50 pstrcpy(backend
.vhost_wwpn
, sizeof(backend
.vhost_wwpn
), vs
->conf
.wwpn
);
51 ret
= vhost_ops
->vhost_scsi_set_endpoint(&s
->dev
, &backend
);
58 static void vhost_scsi_clear_endpoint(VHostSCSI
*s
)
60 VirtIOSCSICommon
*vs
= VIRTIO_SCSI_COMMON(s
);
61 struct vhost_scsi_target backend
;
62 const VhostOps
*vhost_ops
= s
->dev
.vhost_ops
;
64 memset(&backend
, 0, sizeof(backend
));
65 pstrcpy(backend
.vhost_wwpn
, sizeof(backend
.vhost_wwpn
), vs
->conf
.wwpn
);
66 vhost_ops
->vhost_scsi_clear_endpoint(&s
->dev
, &backend
);
69 static int vhost_scsi_start(VHostSCSI
*s
)
71 int ret
, abi_version
, i
;
72 VirtIODevice
*vdev
= VIRTIO_DEVICE(s
);
73 BusState
*qbus
= BUS(qdev_get_parent_bus(DEVICE(vdev
)));
74 VirtioBusClass
*k
= VIRTIO_BUS_GET_CLASS(qbus
);
75 const VhostOps
*vhost_ops
= s
->dev
.vhost_ops
;
77 if (!k
->set_guest_notifiers
) {
78 error_report("binding does not support guest notifiers");
82 ret
= vhost_ops
->vhost_scsi_get_abi_version(&s
->dev
, &abi_version
);
86 if (abi_version
> VHOST_SCSI_ABI_VERSION
) {
87 error_report("vhost-scsi: The running tcm_vhost kernel abi_version:"
88 " %d is greater than vhost_scsi userspace supports: %d, please"
89 " upgrade your version of QEMU", abi_version
,
90 VHOST_SCSI_ABI_VERSION
);
94 ret
= vhost_dev_enable_notifiers(&s
->dev
, vdev
);
99 s
->dev
.acked_features
= vdev
->guest_features
;
100 ret
= vhost_dev_start(&s
->dev
, vdev
);
102 error_report("Error start vhost dev");
106 ret
= vhost_scsi_set_endpoint(s
);
108 error_report("Error set vhost-scsi endpoint");
112 ret
= k
->set_guest_notifiers(qbus
->parent
, s
->dev
.nvqs
, true);
114 error_report("Error binding guest notifier");
118 /* guest_notifier_mask/pending not used yet, so just unmask
119 * everything here. virtio-pci will do the right thing by
120 * enabling/disabling irqfd.
122 for (i
= 0; i
< s
->dev
.nvqs
; i
++) {
123 vhost_virtqueue_mask(&s
->dev
, vdev
, s
->dev
.vq_index
+ i
, false);
129 vhost_scsi_clear_endpoint(s
);
131 vhost_dev_stop(&s
->dev
, vdev
);
133 vhost_dev_disable_notifiers(&s
->dev
, vdev
);
137 static void vhost_scsi_stop(VHostSCSI
*s
)
139 VirtIODevice
*vdev
= VIRTIO_DEVICE(s
);
140 BusState
*qbus
= BUS(qdev_get_parent_bus(DEVICE(vdev
)));
141 VirtioBusClass
*k
= VIRTIO_BUS_GET_CLASS(qbus
);
144 if (k
->set_guest_notifiers
) {
145 ret
= k
->set_guest_notifiers(qbus
->parent
, s
->dev
.nvqs
, false);
147 error_report("vhost guest notifier cleanup failed: %d", ret
);
152 vhost_scsi_clear_endpoint(s
);
153 vhost_dev_stop(&s
->dev
, vdev
);
154 vhost_dev_disable_notifiers(&s
->dev
, vdev
);
157 static uint64_t vhost_scsi_get_features(VirtIODevice
*vdev
,
161 VHostSCSI
*s
= VHOST_SCSI(vdev
);
163 return vhost_get_features(&s
->dev
, kernel_feature_bits
, features
);
166 static void vhost_scsi_set_config(VirtIODevice
*vdev
,
167 const uint8_t *config
)
169 VirtIOSCSIConfig
*scsiconf
= (VirtIOSCSIConfig
*)config
;
170 VirtIOSCSICommon
*vs
= VIRTIO_SCSI_COMMON(vdev
);
172 if ((uint32_t) virtio_ldl_p(vdev
, &scsiconf
->sense_size
) != vs
->sense_size
||
173 (uint32_t) virtio_ldl_p(vdev
, &scsiconf
->cdb_size
) != vs
->cdb_size
) {
174 error_report("vhost-scsi does not support changing the sense data and CDB sizes");
179 static void vhost_scsi_set_status(VirtIODevice
*vdev
, uint8_t val
)
181 VHostSCSI
*s
= (VHostSCSI
*)vdev
;
182 bool start
= (val
& VIRTIO_CONFIG_S_DRIVER_OK
);
184 if (s
->dev
.started
== start
) {
191 ret
= vhost_scsi_start(s
);
193 error_report("virtio-scsi: unable to start vhost: %s",
196 /* There is no userspace virtio-scsi fallback so exit */
204 static void vhost_dummy_handle_output(VirtIODevice
*vdev
, VirtQueue
*vq
)
208 static void vhost_scsi_realize(DeviceState
*dev
, Error
**errp
)
210 VirtIOSCSICommon
*vs
= VIRTIO_SCSI_COMMON(dev
);
211 VHostSCSI
*s
= VHOST_SCSI(dev
);
216 if (!vs
->conf
.wwpn
) {
217 error_setg(errp
, "vhost-scsi: missing wwpn");
221 if (vs
->conf
.vhostfd
) {
222 vhostfd
= monitor_fd_param(cur_mon
, vs
->conf
.vhostfd
, errp
);
224 error_prepend(errp
, "vhost-scsi: unable to parse vhostfd: ");
228 vhostfd
= open("/dev/vhost-scsi", O_RDWR
);
230 error_setg(errp
, "vhost-scsi: open vhost char device failed: %s",
236 virtio_scsi_common_realize(dev
, &err
, vhost_dummy_handle_output
,
237 vhost_dummy_handle_output
,
238 vhost_dummy_handle_output
);
240 error_propagate(errp
, err
);
245 s
->dev
.nvqs
= VHOST_SCSI_VQ_NUM_FIXED
+ vs
->conf
.num_queues
;
246 s
->dev
.vqs
= g_new(struct vhost_virtqueue
, s
->dev
.nvqs
);
248 s
->dev
.backend_features
= 0;
250 ret
= vhost_dev_init(&s
->dev
, (void *)(uintptr_t)vhostfd
,
251 VHOST_BACKEND_TYPE_KERNEL
, 0);
253 error_setg(errp
, "vhost-scsi: vhost initialization failed: %s",
258 /* At present, channel and lun both are 0 for bootable vhost-scsi disk */
261 /* Note: we can also get the minimum tpgt from kernel */
262 s
->target
= vs
->conf
.boot_tpgt
;
264 error_setg(&s
->migration_blocker
,
265 "vhost-scsi does not support migration");
266 migrate_add_blocker(s
->migration_blocker
);
269 static void vhost_scsi_unrealize(DeviceState
*dev
, Error
**errp
)
271 VirtIODevice
*vdev
= VIRTIO_DEVICE(dev
);
272 VHostSCSI
*s
= VHOST_SCSI(dev
);
274 migrate_del_blocker(s
->migration_blocker
);
275 error_free(s
->migration_blocker
);
277 /* This will stop vhost backend. */
278 vhost_scsi_set_status(vdev
, 0);
280 vhost_dev_cleanup(&s
->dev
);
283 virtio_scsi_common_unrealize(dev
, errp
);
287 * Implementation of an interface to adjust firmware path
288 * for the bootindex property handling.
290 static char *vhost_scsi_get_fw_dev_path(FWPathProvider
*p
, BusState
*bus
,
293 VHostSCSI
*s
= VHOST_SCSI(dev
);
294 /* format: channel@channel/vhost-scsi@target,lun */
295 return g_strdup_printf("/channel@%x/%s@%x,%x", s
->channel
,
296 qdev_fw_name(dev
), s
->target
, s
->lun
);
299 static Property vhost_scsi_properties
[] = {
300 DEFINE_PROP_STRING("vhostfd", VHostSCSI
, parent_obj
.conf
.vhostfd
),
301 DEFINE_PROP_STRING("wwpn", VHostSCSI
, parent_obj
.conf
.wwpn
),
302 DEFINE_PROP_UINT32("boot_tpgt", VHostSCSI
, parent_obj
.conf
.boot_tpgt
, 0),
303 DEFINE_PROP_UINT32("num_queues", VHostSCSI
, parent_obj
.conf
.num_queues
, 1),
304 DEFINE_PROP_UINT32("max_sectors", VHostSCSI
, parent_obj
.conf
.max_sectors
,
306 DEFINE_PROP_UINT32("cmd_per_lun", VHostSCSI
, parent_obj
.conf
.cmd_per_lun
,
308 DEFINE_PROP_END_OF_LIST(),
311 static void vhost_scsi_class_init(ObjectClass
*klass
, void *data
)
313 DeviceClass
*dc
= DEVICE_CLASS(klass
);
314 VirtioDeviceClass
*vdc
= VIRTIO_DEVICE_CLASS(klass
);
315 FWPathProviderClass
*fwc
= FW_PATH_PROVIDER_CLASS(klass
);
317 dc
->props
= vhost_scsi_properties
;
318 set_bit(DEVICE_CATEGORY_STORAGE
, dc
->categories
);
319 vdc
->realize
= vhost_scsi_realize
;
320 vdc
->unrealize
= vhost_scsi_unrealize
;
321 vdc
->get_features
= vhost_scsi_get_features
;
322 vdc
->set_config
= vhost_scsi_set_config
;
323 vdc
->set_status
= vhost_scsi_set_status
;
324 fwc
->get_dev_path
= vhost_scsi_get_fw_dev_path
;
327 static void vhost_scsi_instance_init(Object
*obj
)
329 VHostSCSI
*dev
= VHOST_SCSI(obj
);
331 device_add_bootindex_property(obj
, &dev
->bootindex
, "bootindex", NULL
,
335 static const TypeInfo vhost_scsi_info
= {
336 .name
= TYPE_VHOST_SCSI
,
337 .parent
= TYPE_VIRTIO_SCSI_COMMON
,
338 .instance_size
= sizeof(VHostSCSI
),
339 .class_init
= vhost_scsi_class_init
,
340 .instance_init
= vhost_scsi_instance_init
,
341 .interfaces
= (InterfaceInfo
[]) {
342 { TYPE_FW_PATH_PROVIDER
},
347 static void virtio_register_types(void)
349 type_register_static(&vhost_scsi_info
);
352 type_init(virtio_register_types
)