meson: use pkg-config method for libudev
[qemu/ar7.git] / hw / intc / bcm2836_control.c
blob2ead76ffdce205e797a97d7d450b8a3dba1800b5
1 /*
2 * Rasperry Pi 2 emulation ARM control logic module.
3 * Copyright (c) 2015, Microsoft
4 * Written by Andrew Baumann
6 * Based on bcm2835_ic.c (Raspberry Pi emulation) (c) 2012 Gregory Estrade
8 * At present, only implements interrupt routing, and mailboxes (i.e.,
9 * not PMU interrupt, or AXI counters).
11 * ARM Local Timer IRQ Copyright (c) 2019. Zoltán Baldaszti
13 * Ref:
14 * https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2836/QA7_rev3.4.pdf
16 * This work is licensed under the terms of the GNU GPL, version 2 or later.
17 * See the COPYING file in the top-level directory.
20 #include "qemu/osdep.h"
21 #include "hw/intc/bcm2836_control.h"
22 #include "hw/irq.h"
23 #include "migration/vmstate.h"
24 #include "qemu/log.h"
25 #include "qemu/module.h"
27 #define REG_GPU_ROUTE 0x0c
28 #define REG_LOCALTIMERROUTING 0x24
29 #define REG_LOCALTIMERCONTROL 0x34
30 #define REG_LOCALTIMERACK 0x38
31 #define REG_TIMERCONTROL 0x40
32 #define REG_MBOXCONTROL 0x50
33 #define REG_IRQSRC 0x60
34 #define REG_FIQSRC 0x70
35 #define REG_MBOX0_WR 0x80
36 #define REG_MBOX0_RDCLR 0xc0
37 #define REG_LIMIT 0x100
39 #define IRQ_BIT(cntrl, num) (((cntrl) & (1 << (num))) != 0)
40 #define FIQ_BIT(cntrl, num) (((cntrl) & (1 << ((num) + 4))) != 0)
42 #define IRQ_CNTPSIRQ 0
43 #define IRQ_CNTPNSIRQ 1
44 #define IRQ_CNTHPIRQ 2
45 #define IRQ_CNTVIRQ 3
46 #define IRQ_MAILBOX0 4
47 #define IRQ_MAILBOX1 5
48 #define IRQ_MAILBOX2 6
49 #define IRQ_MAILBOX3 7
50 #define IRQ_GPU 8
51 #define IRQ_PMU 9
52 #define IRQ_AXI 10
53 #define IRQ_TIMER 11
54 #define IRQ_MAX IRQ_TIMER
56 #define LOCALTIMER_FREQ 38400000
57 #define LOCALTIMER_INTFLAG (1 << 31)
58 #define LOCALTIMER_RELOAD (1 << 30)
59 #define LOCALTIMER_INTENABLE (1 << 29)
60 #define LOCALTIMER_ENABLE (1 << 28)
61 #define LOCALTIMER_VALUE(x) ((x) & 0xfffffff)
63 static void deliver_local(BCM2836ControlState *s, uint8_t core, uint8_t irq,
64 uint32_t controlreg, uint8_t controlidx)
66 if (FIQ_BIT(controlreg, controlidx)) {
67 /* deliver a FIQ */
68 s->fiqsrc[core] |= (uint32_t)1 << irq;
69 } else if (IRQ_BIT(controlreg, controlidx)) {
70 /* deliver an IRQ */
71 s->irqsrc[core] |= (uint32_t)1 << irq;
72 } else {
73 /* the interrupt is masked */
77 /* Update interrupts. */
78 static void bcm2836_control_update(BCM2836ControlState *s)
80 int i, j;
82 /* reset pending IRQs/FIQs */
83 for (i = 0; i < BCM2836_NCORES; i++) {
84 s->irqsrc[i] = s->fiqsrc[i] = 0;
87 /* apply routing logic, update status regs */
88 if (s->gpu_irq) {
89 assert(s->route_gpu_irq < BCM2836_NCORES);
90 s->irqsrc[s->route_gpu_irq] |= (uint32_t)1 << IRQ_GPU;
93 if (s->gpu_fiq) {
94 assert(s->route_gpu_fiq < BCM2836_NCORES);
95 s->fiqsrc[s->route_gpu_fiq] |= (uint32_t)1 << IRQ_GPU;
99 * handle the control module 'local timer' interrupt for one of the
100 * cores' IRQ/FIQ; this is distinct from the per-CPU timer
101 * interrupts handled below.
103 if ((s->local_timer_control & LOCALTIMER_INTENABLE) &&
104 (s->local_timer_control & LOCALTIMER_INTFLAG)) {
105 if (s->route_localtimer & 4) {
106 s->fiqsrc[(s->route_localtimer & 3)] |= (uint32_t)1 << IRQ_TIMER;
107 } else {
108 s->irqsrc[(s->route_localtimer & 3)] |= (uint32_t)1 << IRQ_TIMER;
112 for (i = 0; i < BCM2836_NCORES; i++) {
113 /* handle local timer interrupts for this core */
114 if (s->timerirqs[i]) {
115 assert(s->timerirqs[i] < (1 << (IRQ_CNTVIRQ + 1))); /* sane mask? */
116 for (j = 0; j <= IRQ_CNTVIRQ; j++) {
117 if ((s->timerirqs[i] & (1 << j)) != 0) {
118 /* local interrupt j is set */
119 deliver_local(s, i, j, s->timercontrol[i], j);
124 /* handle mailboxes for this core */
125 for (j = 0; j < BCM2836_MBPERCORE; j++) {
126 if (s->mailboxes[i * BCM2836_MBPERCORE + j] != 0) {
127 /* mailbox j is set */
128 deliver_local(s, i, j + IRQ_MAILBOX0, s->mailboxcontrol[i], j);
133 /* call set_irq appropriately for each output */
134 for (i = 0; i < BCM2836_NCORES; i++) {
135 qemu_set_irq(s->irq[i], s->irqsrc[i] != 0);
136 qemu_set_irq(s->fiq[i], s->fiqsrc[i] != 0);
140 static void bcm2836_control_set_local_irq(void *opaque, int core, int local_irq,
141 int level)
143 BCM2836ControlState *s = opaque;
145 assert(core >= 0 && core < BCM2836_NCORES);
146 assert(local_irq >= 0 && local_irq <= IRQ_CNTVIRQ);
148 s->timerirqs[core] = deposit32(s->timerirqs[core], local_irq, 1, !!level);
150 bcm2836_control_update(s);
153 /* XXX: the following wrapper functions are a kludgy workaround,
154 * needed because I can't seem to pass useful information in the "irq"
155 * parameter when using named interrupts. Feel free to clean this up!
158 static void bcm2836_control_set_local_irq0(void *opaque, int core, int level)
160 bcm2836_control_set_local_irq(opaque, core, IRQ_CNTPSIRQ, level);
163 static void bcm2836_control_set_local_irq1(void *opaque, int core, int level)
165 bcm2836_control_set_local_irq(opaque, core, IRQ_CNTPNSIRQ, level);
168 static void bcm2836_control_set_local_irq2(void *opaque, int core, int level)
170 bcm2836_control_set_local_irq(opaque, core, IRQ_CNTHPIRQ, level);
173 static void bcm2836_control_set_local_irq3(void *opaque, int core, int level)
175 bcm2836_control_set_local_irq(opaque, core, IRQ_CNTVIRQ, level);
178 static void bcm2836_control_set_gpu_irq(void *opaque, int irq, int level)
180 BCM2836ControlState *s = opaque;
182 s->gpu_irq = level;
184 bcm2836_control_update(s);
187 static void bcm2836_control_set_gpu_fiq(void *opaque, int irq, int level)
189 BCM2836ControlState *s = opaque;
191 s->gpu_fiq = level;
193 bcm2836_control_update(s);
196 static void bcm2836_control_local_timer_set_next(void *opaque)
198 BCM2836ControlState *s = opaque;
199 uint64_t next_event;
201 assert(LOCALTIMER_VALUE(s->local_timer_control) > 0);
203 next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
204 muldiv64(LOCALTIMER_VALUE(s->local_timer_control),
205 NANOSECONDS_PER_SECOND, LOCALTIMER_FREQ);
206 timer_mod(&s->timer, next_event);
209 static void bcm2836_control_local_timer_tick(void *opaque)
211 BCM2836ControlState *s = opaque;
213 bcm2836_control_local_timer_set_next(s);
215 s->local_timer_control |= LOCALTIMER_INTFLAG;
216 bcm2836_control_update(s);
219 static void bcm2836_control_local_timer_control(void *opaque, uint32_t val)
221 BCM2836ControlState *s = opaque;
223 s->local_timer_control = val;
224 if (val & LOCALTIMER_ENABLE) {
225 bcm2836_control_local_timer_set_next(s);
226 } else {
227 timer_del(&s->timer);
231 static void bcm2836_control_local_timer_ack(void *opaque, uint32_t val)
233 BCM2836ControlState *s = opaque;
235 if (val & LOCALTIMER_INTFLAG) {
236 s->local_timer_control &= ~LOCALTIMER_INTFLAG;
238 if ((val & LOCALTIMER_RELOAD) &&
239 (s->local_timer_control & LOCALTIMER_ENABLE)) {
240 bcm2836_control_local_timer_set_next(s);
244 static uint64_t bcm2836_control_read(void *opaque, hwaddr offset, unsigned size)
246 BCM2836ControlState *s = opaque;
248 if (offset == REG_GPU_ROUTE) {
249 assert(s->route_gpu_fiq < BCM2836_NCORES
250 && s->route_gpu_irq < BCM2836_NCORES);
251 return ((uint32_t)s->route_gpu_fiq << 2) | s->route_gpu_irq;
252 } else if (offset == REG_LOCALTIMERROUTING) {
253 return s->route_localtimer;
254 } else if (offset == REG_LOCALTIMERCONTROL) {
255 return s->local_timer_control;
256 } else if (offset == REG_LOCALTIMERACK) {
257 return 0;
258 } else if (offset >= REG_TIMERCONTROL && offset < REG_MBOXCONTROL) {
259 return s->timercontrol[(offset - REG_TIMERCONTROL) >> 2];
260 } else if (offset >= REG_MBOXCONTROL && offset < REG_IRQSRC) {
261 return s->mailboxcontrol[(offset - REG_MBOXCONTROL) >> 2];
262 } else if (offset >= REG_IRQSRC && offset < REG_FIQSRC) {
263 return s->irqsrc[(offset - REG_IRQSRC) >> 2];
264 } else if (offset >= REG_FIQSRC && offset < REG_MBOX0_WR) {
265 return s->fiqsrc[(offset - REG_FIQSRC) >> 2];
266 } else if (offset >= REG_MBOX0_RDCLR && offset < REG_LIMIT) {
267 return s->mailboxes[(offset - REG_MBOX0_RDCLR) >> 2];
268 } else {
269 qemu_log_mask(LOG_UNIMP, "%s: Unsupported offset 0x%"HWADDR_PRIx"\n",
270 __func__, offset);
271 return 0;
275 static void bcm2836_control_write(void *opaque, hwaddr offset,
276 uint64_t val, unsigned size)
278 BCM2836ControlState *s = opaque;
280 if (offset == REG_GPU_ROUTE) {
281 s->route_gpu_irq = val & 0x3;
282 s->route_gpu_fiq = (val >> 2) & 0x3;
283 } else if (offset == REG_LOCALTIMERROUTING) {
284 s->route_localtimer = val & 7;
285 } else if (offset == REG_LOCALTIMERCONTROL) {
286 bcm2836_control_local_timer_control(s, val);
287 } else if (offset == REG_LOCALTIMERACK) {
288 bcm2836_control_local_timer_ack(s, val);
289 } else if (offset >= REG_TIMERCONTROL && offset < REG_MBOXCONTROL) {
290 s->timercontrol[(offset - REG_TIMERCONTROL) >> 2] = val & 0xff;
291 } else if (offset >= REG_MBOXCONTROL && offset < REG_IRQSRC) {
292 s->mailboxcontrol[(offset - REG_MBOXCONTROL) >> 2] = val & 0xff;
293 } else if (offset >= REG_MBOX0_WR && offset < REG_MBOX0_RDCLR) {
294 s->mailboxes[(offset - REG_MBOX0_WR) >> 2] |= val;
295 } else if (offset >= REG_MBOX0_RDCLR && offset < REG_LIMIT) {
296 s->mailboxes[(offset - REG_MBOX0_RDCLR) >> 2] &= ~val;
297 } else {
298 qemu_log_mask(LOG_UNIMP, "%s: Unsupported offset 0x%"HWADDR_PRIx
299 " value 0x%"PRIx64"\n",
300 __func__, offset, val);
301 return;
304 bcm2836_control_update(s);
307 static const MemoryRegionOps bcm2836_control_ops = {
308 .read = bcm2836_control_read,
309 .write = bcm2836_control_write,
310 .endianness = DEVICE_NATIVE_ENDIAN,
311 .valid.min_access_size = 4,
312 .valid.max_access_size = 4,
315 static void bcm2836_control_reset(DeviceState *d)
317 BCM2836ControlState *s = BCM2836_CONTROL(d);
318 int i;
320 s->route_gpu_irq = s->route_gpu_fiq = 0;
322 timer_del(&s->timer);
323 s->route_localtimer = 0;
324 s->local_timer_control = 0;
326 for (i = 0; i < BCM2836_NCORES; i++) {
327 s->timercontrol[i] = 0;
328 s->mailboxcontrol[i] = 0;
331 for (i = 0; i < BCM2836_NCORES * BCM2836_MBPERCORE; i++) {
332 s->mailboxes[i] = 0;
336 static void bcm2836_control_init(Object *obj)
338 BCM2836ControlState *s = BCM2836_CONTROL(obj);
339 DeviceState *dev = DEVICE(obj);
341 memory_region_init_io(&s->iomem, obj, &bcm2836_control_ops, s,
342 TYPE_BCM2836_CONTROL, REG_LIMIT);
343 sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
345 /* inputs from each CPU core */
346 qdev_init_gpio_in_named(dev, bcm2836_control_set_local_irq0, "cntpsirq",
347 BCM2836_NCORES);
348 qdev_init_gpio_in_named(dev, bcm2836_control_set_local_irq1, "cntpnsirq",
349 BCM2836_NCORES);
350 qdev_init_gpio_in_named(dev, bcm2836_control_set_local_irq2, "cnthpirq",
351 BCM2836_NCORES);
352 qdev_init_gpio_in_named(dev, bcm2836_control_set_local_irq3, "cntvirq",
353 BCM2836_NCORES);
355 /* IRQ and FIQ inputs from upstream bcm2835 controller */
356 qdev_init_gpio_in_named(dev, bcm2836_control_set_gpu_irq, "gpu-irq", 1);
357 qdev_init_gpio_in_named(dev, bcm2836_control_set_gpu_fiq, "gpu-fiq", 1);
359 /* outputs to CPU cores */
360 qdev_init_gpio_out_named(dev, s->irq, "irq", BCM2836_NCORES);
361 qdev_init_gpio_out_named(dev, s->fiq, "fiq", BCM2836_NCORES);
363 /* create a qemu virtual timer */
364 timer_init_ns(&s->timer, QEMU_CLOCK_VIRTUAL,
365 bcm2836_control_local_timer_tick, s);
368 static const VMStateDescription vmstate_bcm2836_control = {
369 .name = TYPE_BCM2836_CONTROL,
370 .version_id = 2,
371 .minimum_version_id = 1,
372 .fields = (VMStateField[]) {
373 VMSTATE_UINT32_ARRAY(mailboxes, BCM2836ControlState,
374 BCM2836_NCORES * BCM2836_MBPERCORE),
375 VMSTATE_UINT8(route_gpu_irq, BCM2836ControlState),
376 VMSTATE_UINT8(route_gpu_fiq, BCM2836ControlState),
377 VMSTATE_UINT32_ARRAY(timercontrol, BCM2836ControlState, BCM2836_NCORES),
378 VMSTATE_UINT32_ARRAY(mailboxcontrol, BCM2836ControlState,
379 BCM2836_NCORES),
380 VMSTATE_TIMER_V(timer, BCM2836ControlState, 2),
381 VMSTATE_UINT32_V(local_timer_control, BCM2836ControlState, 2),
382 VMSTATE_UINT8_V(route_localtimer, BCM2836ControlState, 2),
383 VMSTATE_END_OF_LIST()
387 static void bcm2836_control_class_init(ObjectClass *klass, void *data)
389 DeviceClass *dc = DEVICE_CLASS(klass);
391 dc->reset = bcm2836_control_reset;
392 dc->vmsd = &vmstate_bcm2836_control;
395 static TypeInfo bcm2836_control_info = {
396 .name = TYPE_BCM2836_CONTROL,
397 .parent = TYPE_SYS_BUS_DEVICE,
398 .instance_size = sizeof(BCM2836ControlState),
399 .class_init = bcm2836_control_class_init,
400 .instance_init = bcm2836_control_init,
403 static void bcm2836_control_register_types(void)
405 type_register_static(&bcm2836_control_info);
408 type_init(bcm2836_control_register_types)