hw/char/parallel.c

   1 /*
   2  * QEMU Parallel PORT emulation
   3  *
   4  * Copyright (c) 2003-2005 Fabrice Bellard
   5  * Copyright (c) 2007 Marko Kohtala
   6  *
   7  * Permission is hereby granted, free of charge, to any person obtaining a copy
   8  * of this software and associated documentation files (the "Software"), to deal
   9  * in the Software without restriction, including without limitation the rights
  10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  11  * copies of the Software, and to permit persons to whom the Software is
  12  * furnished to do so, subject to the following conditions:
  13  *
  14  * The above copyright notice and this permission notice shall be included in
  15  * all copies or substantial portions of the Software.
  16  *
  17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  23  * THE SOFTWARE.
  24  */
  25
  26 #include "qemu/osdep.h"
  27 #include "qapi/error.h"
  28 #include "qemu/module.h"
  29 #include "chardev/char-parallel.h"
  30 #include "chardev/char-fe.h"
  31 #include "hw/acpi/aml-build.h"
  32 #include "hw/irq.h"
  33 #include "hw/isa/isa.h"
  34 #include "hw/qdev-properties.h"
  35 #include "hw/qdev-properties-system.h"
  36 #include "migration/vmstate.h"
  37 #include "hw/char/parallel.h"
  38 #include "sysemu/reset.h"
  39 #include "sysemu/sysemu.h"
  40 #include "trace.h"
  41 #include "qom/object.h"
  42
  43 //#define DEBUG_PARALLEL
  44
  45 #ifdef DEBUG_PARALLEL
  46 #define pdebug(fmt, ...) printf("pp: " fmt, ## __VA_ARGS__)
  47 #else
  48 #define pdebug(fmt, ...) ((void)0)
  49 #endif
  50
  51 #define PARA_REG_DATA 0
  52 #define PARA_REG_STS 1
  53 #define PARA_REG_CTR 2
  54 #define PARA_REG_EPP_ADDR 3
  55 #define PARA_REG_EPP_DATA 4
  56
  57 /*
  58  * These are the definitions for the Printer Status Register
  59  */
  60 #define PARA_STS_BUSY   0x80    /* Busy complement */
  61 #define PARA_STS_ACK    0x40    /* Acknowledge */
  62 #define PARA_STS_PAPER  0x20    /* Out of paper */
  63 #define PARA_STS_ONLINE 0x10    /* Online */
  64 #define PARA_STS_ERROR  0x08    /* Error complement */
  65 #define PARA_STS_TMOUT  0x01    /* EPP timeout */
  66
  67 /*
  68  * These are the definitions for the Printer Control Register
  69  */
  70 #define PARA_CTR_DIR    0x20    /* Direction (1=read, 0=write) */
  71 #define PARA_CTR_INTEN  0x10    /* IRQ Enable */
  72 #define PARA_CTR_SELECT 0x08    /* Select In complement */
  73 #define PARA_CTR_INIT   0x04    /* Initialize Printer complement */
  74 #define PARA_CTR_AUTOLF 0x02    /* Auto linefeed complement */
  75 #define PARA_CTR_STROBE 0x01    /* Strobe complement */
  76
  77 #define PARA_CTR_SIGNAL (PARA_CTR_SELECT|PARA_CTR_INIT|PARA_CTR_AUTOLF|PARA_CTR_STROBE)
  78
  79 typedef struct ParallelState {
  80     MemoryRegion iomem;
  81     uint8_t dataw;
  82     uint8_t datar;
  83     uint8_t status;
  84     uint8_t control;
  85     qemu_irq irq;
  86     int irq_pending;
  87     CharBackend chr;
  88     int hw_driver;
  89     int epp_timeout;
  90     uint32_t last_read_offset; /* For debugging */
  91     /* Memory-mapped interface */
  92     int it_shift;
  93     PortioList portio_list;
  94 } ParallelState;
  95
  96 #define TYPE_ISA_PARALLEL "isa-parallel"
  97 OBJECT_DECLARE_SIMPLE_TYPE(ISAParallelState, ISA_PARALLEL)
  98
  99 struct ISAParallelState {
 100     ISADevice parent_obj;
 101
 102     uint32_t index;
 103     uint32_t iobase;
 104     uint32_t isairq;
 105     ParallelState state;
 106 };
 107
 108 static void parallel_update_irq(ParallelState *s)
 109 {
 110     if (s->irq_pending)
 111         qemu_irq_raise(s->irq);
 112     else
 113         qemu_irq_lower(s->irq);
 114 }
 115
 116 static void
 117 parallel_ioport_write_sw(void *opaque, uint32_t addr, uint32_t val)
 118 {
 119     ParallelState *s = opaque;
 120
 121     addr &= 7;
 122     trace_parallel_ioport_write("SW", addr, val);
 123     switch(addr) {
 124     case PARA_REG_DATA:
 125         s->dataw = val;
 126         parallel_update_irq(s);
 127         break;
 128     case PARA_REG_CTR:
 129         val |= 0xc0;
 130         if ((val & PARA_CTR_INIT) == 0 ) {
 131             s->status = PARA_STS_BUSY;
 132             s->status |= PARA_STS_ACK;
 133             s->status |= PARA_STS_ONLINE;
 134             s->status |= PARA_STS_ERROR;
 135         }
 136         else if (val & PARA_CTR_SELECT) {
 137             if (val & PARA_CTR_STROBE) {
 138                 s->status &= ~PARA_STS_BUSY;
 139                 if ((s->control & PARA_CTR_STROBE) == 0)
 140                     /* XXX this blocks entire thread. Rewrite to use
 141                      * qemu_chr_fe_write and background I/O callbacks */
 142                     qemu_chr_fe_write_all(&s->chr, &s->dataw, 1);
 143             } else {
 144                 if (s->control & PARA_CTR_INTEN) {
 145                     s->irq_pending = 1;
 146                 }
 147             }
 148         }
 149         parallel_update_irq(s);
 150         s->control = val;
 151         break;
 152     }
 153 }
 154
 155 static void parallel_ioport_write_hw(void *opaque, uint32_t addr, uint32_t val)
 156 {
 157     ParallelState *s = opaque;
 158     uint8_t parm = val;
 159     int dir;
 160
 161     /* Sometimes programs do several writes for timing purposes on old
 162        HW. Take care not to waste time on writes that do nothing. */
 163
 164     s->last_read_offset = ~0U;
 165
 166     addr &= 7;
 167     trace_parallel_ioport_write("HW", addr, val);
 168     switch(addr) {
 169     case PARA_REG_DATA:
 170         if (s->dataw == val)
 171             return;
 172         pdebug("wd%02x\n", val);
 173         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_WRITE_DATA, &parm);
 174         s->dataw = val;
 175         break;
 176     case PARA_REG_STS:
 177         pdebug("ws%02x\n", val);
 178         if (val & PARA_STS_TMOUT)
 179             s->epp_timeout = 0;
 180         break;
 181     case PARA_REG_CTR:
 182         val |= 0xc0;
 183         if (s->control == val)
 184             return;
 185         pdebug("wc%02x\n", val);
 186
 187         if ((val & PARA_CTR_DIR) != (s->control & PARA_CTR_DIR)) {
 188             if (val & PARA_CTR_DIR) {
 189                 dir = 1;
 190             } else {
 191                 dir = 0;
 192             }
 193             qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_DATA_DIR, &dir);
 194             parm &= ~PARA_CTR_DIR;
 195         }
 196
 197         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_WRITE_CONTROL, &parm);
 198         s->control = val;
 199         break;
 200     case PARA_REG_EPP_ADDR:
 201         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
 202             /* Controls not correct for EPP address cycle, so do nothing */
 203             pdebug("wa%02x s\n", val);
 204         else {
 205             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
 206             if (qemu_chr_fe_ioctl(&s->chr,
 207                                   CHR_IOCTL_PP_EPP_WRITE_ADDR, &ioarg)) {
 208                 s->epp_timeout = 1;
 209                 pdebug("wa%02x t\n", val);
 210             }
 211             else
 212                 pdebug("wa%02x\n", val);
 213         }
 214         break;
 215     case PARA_REG_EPP_DATA:
 216         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
 217             /* Controls not correct for EPP data cycle, so do nothing */
 218             pdebug("we%02x s\n", val);
 219         else {
 220             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
 221             if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg)) {
 222                 s->epp_timeout = 1;
 223                 pdebug("we%02x t\n", val);
 224             }
 225             else
 226                 pdebug("we%02x\n", val);
 227         }
 228         break;
 229     }
 230 }
 231
 232 static void
 233 parallel_ioport_eppdata_write_hw2(void *opaque, uint32_t addr, uint32_t val)
 234 {
 235     ParallelState *s = opaque;
 236     uint16_t eppdata = cpu_to_le16(val);
 237     int err;
 238     struct ParallelIOArg ioarg = {
 239         .buffer = &eppdata, .count = sizeof(eppdata)
 240     };
 241
 242     trace_parallel_ioport_write("EPP", addr, val);
 243     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
 244         /* Controls not correct for EPP data cycle, so do nothing */
 245         pdebug("we%04x s\n", val);
 246         return;
 247     }
 248     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
 249     if (err) {
 250         s->epp_timeout = 1;
 251         pdebug("we%04x t\n", val);
 252     }
 253     else
 254         pdebug("we%04x\n", val);
 255 }
 256
 257 static void
 258 parallel_ioport_eppdata_write_hw4(void *opaque, uint32_t addr, uint32_t val)
 259 {
 260     ParallelState *s = opaque;
 261     uint32_t eppdata = cpu_to_le32(val);
 262     int err;
 263     struct ParallelIOArg ioarg = {
 264         .buffer = &eppdata, .count = sizeof(eppdata)
 265     };
 266
 267     trace_parallel_ioport_write("EPP", addr, val);
 268     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
 269         /* Controls not correct for EPP data cycle, so do nothing */
 270         pdebug("we%08x s\n", val);
 271         return;
 272     }
 273     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
 274     if (err) {
 275         s->epp_timeout = 1;
 276         pdebug("we%08x t\n", val);
 277     }
 278     else
 279         pdebug("we%08x\n", val);
 280 }
 281
 282 static uint32_t parallel_ioport_read_sw(void *opaque, uint32_t addr)
 283 {
 284     ParallelState *s = opaque;
 285     uint32_t ret = 0xff;
 286
 287     addr &= 7;
 288     switch(addr) {
 289     case PARA_REG_DATA:
 290         if (s->control & PARA_CTR_DIR)
 291             ret = s->datar;
 292         else
 293             ret = s->dataw;
 294         break;
 295     case PARA_REG_STS:
 296         ret = s->status;
 297         s->irq_pending = 0;
 298         if ((s->status & PARA_STS_BUSY) == 0 && (s->control & PARA_CTR_STROBE) == 0) {
 299             /* XXX Fixme: wait 5 microseconds */
 300             if (s->status & PARA_STS_ACK)
 301                 s->status &= ~PARA_STS_ACK;
 302             else {
 303                 /* XXX Fixme: wait 5 microseconds */
 304                 s->status |= PARA_STS_ACK;
 305                 s->status |= PARA_STS_BUSY;
 306             }
 307         }
 308         parallel_update_irq(s);
 309         break;
 310     case PARA_REG_CTR:
 311         ret = s->control;
 312         break;
 313     }
 314     trace_parallel_ioport_read("SW", addr, ret);
 315     return ret;
 316 }
 317
 318 static uint32_t parallel_ioport_read_hw(void *opaque, uint32_t addr)
 319 {
 320     ParallelState *s = opaque;
 321     uint8_t ret = 0xff;
 322     addr &= 7;
 323     switch(addr) {
 324     case PARA_REG_DATA:
 325         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_DATA, &ret);
 326         if (s->last_read_offset != addr || s->datar != ret)
 327             pdebug("rd%02x\n", ret);
 328         s->datar = ret;
 329         break;
 330     case PARA_REG_STS:
 331         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_STATUS, &ret);
 332         ret &= ~PARA_STS_TMOUT;
 333         if (s->epp_timeout)
 334             ret |= PARA_STS_TMOUT;
 335         if (s->last_read_offset != addr || s->status != ret)
 336             pdebug("rs%02x\n", ret);
 337         s->status = ret;
 338         break;
 339     case PARA_REG_CTR:
 340         /* s->control has some bits fixed to 1. It is zero only when
 341            it has not been yet written to.  */
 342         if (s->control == 0) {
 343             qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_CONTROL, &ret);
 344             if (s->last_read_offset != addr)
 345                 pdebug("rc%02x\n", ret);
 346             s->control = ret;
 347         }
 348         else {
 349             ret = s->control;
 350             if (s->last_read_offset != addr)
 351                 pdebug("rc%02x\n", ret);
 352         }
 353         break;
 354     case PARA_REG_EPP_ADDR:
 355         if ((s->control & (PARA_CTR_DIR | PARA_CTR_SIGNAL)) !=
 356             (PARA_CTR_DIR | PARA_CTR_INIT))
 357             /* Controls not correct for EPP addr cycle, so do nothing */
 358             pdebug("ra%02x s\n", ret);
 359         else {
 360             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
 361             if (qemu_chr_fe_ioctl(&s->chr,
 362                                   CHR_IOCTL_PP_EPP_READ_ADDR, &ioarg)) {
 363                 s->epp_timeout = 1;
 364                 pdebug("ra%02x t\n", ret);
 365             }
 366             else
 367                 pdebug("ra%02x\n", ret);
 368         }
 369         break;
 370     case PARA_REG_EPP_DATA:
 371         if ((s->control & (PARA_CTR_DIR | PARA_CTR_SIGNAL)) !=
 372             (PARA_CTR_DIR | PARA_CTR_INIT))
 373             /* Controls not correct for EPP data cycle, so do nothing */
 374             pdebug("re%02x s\n", ret);
 375         else {
 376             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
 377             if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg)) {
 378                 s->epp_timeout = 1;
 379                 pdebug("re%02x t\n", ret);
 380             }
 381             else
 382                 pdebug("re%02x\n", ret);
 383         }
 384         break;
 385     }
 386     trace_parallel_ioport_read("HW", addr, ret);
 387     s->last_read_offset = addr;
 388     return ret;
 389 }
 390
 391 static uint32_t
 392 parallel_ioport_eppdata_read_hw2(void *opaque, uint32_t addr)
 393 {
 394     ParallelState *s = opaque;
 395     uint32_t ret;
 396     uint16_t eppdata = ~0;
 397     int err;
 398     struct ParallelIOArg ioarg = {
 399         .buffer = &eppdata, .count = sizeof(eppdata)
 400     };
 401     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
 402         /* Controls not correct for EPP data cycle, so do nothing */
 403         pdebug("re%04x s\n", eppdata);
 404         return eppdata;
 405     }
 406     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
 407     ret = le16_to_cpu(eppdata);
 408
 409     if (err) {
 410         s->epp_timeout = 1;
 411         pdebug("re%04x t\n", ret);
 412     }
 413     else
 414         pdebug("re%04x\n", ret);
 415     trace_parallel_ioport_read("EPP", addr, ret);
 416     return ret;
 417 }
 418
 419 static uint32_t
 420 parallel_ioport_eppdata_read_hw4(void *opaque, uint32_t addr)
 421 {
 422     ParallelState *s = opaque;
 423     uint32_t ret;
 424     uint32_t eppdata = ~0U;
 425     int err;
 426     struct ParallelIOArg ioarg = {
 427         .buffer = &eppdata, .count = sizeof(eppdata)
 428     };
 429     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
 430         /* Controls not correct for EPP data cycle, so do nothing */
 431         pdebug("re%08x s\n", eppdata);
 432         return eppdata;
 433     }
 434     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
 435     ret = le32_to_cpu(eppdata);
 436
 437     if (err) {
 438         s->epp_timeout = 1;
 439         pdebug("re%08x t\n", ret);
 440     }
 441     else
 442         pdebug("re%08x\n", ret);
 443     trace_parallel_ioport_read("EPP", addr, ret);
 444     return ret;
 445 }
 446
 447 static void parallel_ioport_ecp_write(void *opaque, uint32_t addr, uint32_t val)
 448 {
 449     trace_parallel_ioport_write("ECP", addr & 7, val);
 450     pdebug("wecp%d=%02x\n", addr & 7, val);
 451 }
 452
 453 static uint32_t parallel_ioport_ecp_read(void *opaque, uint32_t addr)
 454 {
 455     uint8_t ret = 0xff;
 456
 457     trace_parallel_ioport_read("ECP", addr & 7, ret);
 458     pdebug("recp%d:%02x\n", addr & 7, ret);
 459     return ret;
 460 }
 461
 462 static void parallel_reset(void *opaque)
 463 {
 464     ParallelState *s = opaque;
 465
 466     s->datar = ~0;
 467     s->dataw = ~0;
 468     s->status = PARA_STS_BUSY;
 469     s->status |= PARA_STS_ACK;
 470     s->status |= PARA_STS_ONLINE;
 471     s->status |= PARA_STS_ERROR;
 472     s->status |= PARA_STS_TMOUT;
 473     s->control = PARA_CTR_SELECT;
 474     s->control |= PARA_CTR_INIT;
 475     s->control |= 0xc0;
 476     s->irq_pending = 0;
 477     s->hw_driver = 0;
 478     s->epp_timeout = 0;
 479     s->last_read_offset = ~0U;
 480 }
 481
 482 static const int isa_parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
 483
 484 static const MemoryRegionPortio isa_parallel_portio_hw_list[] = {
 485     { 0, 8, 1,
 486       .read = parallel_ioport_read_hw,
 487       .write = parallel_ioport_write_hw },
 488     { 4, 1, 2,
 489       .read = parallel_ioport_eppdata_read_hw2,
 490       .write = parallel_ioport_eppdata_write_hw2 },
 491     { 4, 1, 4,
 492       .read = parallel_ioport_eppdata_read_hw4,
 493       .write = parallel_ioport_eppdata_write_hw4 },
 494     { 0x400, 8, 1,
 495       .read = parallel_ioport_ecp_read,
 496       .write = parallel_ioport_ecp_write },
 497     PORTIO_END_OF_LIST(),
 498 };
 499
 500 static const MemoryRegionPortio isa_parallel_portio_sw_list[] = {
 501     { 0, 8, 1,
 502       .read = parallel_ioport_read_sw,
 503       .write = parallel_ioport_write_sw },
 504     PORTIO_END_OF_LIST(),
 505 };
 506
 507
 508 static const VMStateDescription vmstate_parallel_isa = {
 509     .name = "parallel_isa",
 510     .version_id = 1,
 511     .minimum_version_id = 1,
 512     .fields      = (VMStateField[]) {
 513         VMSTATE_UINT8(state.dataw, ISAParallelState),
 514         VMSTATE_UINT8(state.datar, ISAParallelState),
 515         VMSTATE_UINT8(state.status, ISAParallelState),
 516         VMSTATE_UINT8(state.control, ISAParallelState),
 517         VMSTATE_INT32(state.irq_pending, ISAParallelState),
 518         VMSTATE_INT32(state.epp_timeout, ISAParallelState),
 519         VMSTATE_END_OF_LIST()
 520     }
 521 };
 522
 523 static int parallel_can_receive(void *opaque)
 524 {
 525      return 1;
 526 }
 527
 528 static void parallel_isa_realizefn(DeviceState *dev, Error **errp)
 529 {
 530     static int index;
 531     ISADevice *isadev = ISA_DEVICE(dev);
 532     ISAParallelState *isa = ISA_PARALLEL(dev);
 533     ParallelState *s = &isa->state;
 534     int base;
 535     uint8_t dummy;
 536
 537     if (!qemu_chr_fe_backend_connected(&s->chr)) {
 538         error_setg(errp, "Can't create parallel device, empty char device");
 539         return;
 540     }
 541
 542     if (isa->index == -1) {
 543         isa->index = index;
 544     }
 545     if (isa->index >= MAX_PARALLEL_PORTS) {
 546         error_setg(errp, "Max. supported number of parallel ports is %d.",
 547                    MAX_PARALLEL_PORTS);
 548         return;
 549     }
 550     if (isa->iobase == -1) {
 551         isa->iobase = isa_parallel_io[isa->index];
 552     }
 553     index++;
 554
 555     base = isa->iobase;
 556     isa_init_irq(isadev, &s->irq, isa->isairq);
 557     qemu_register_reset(parallel_reset, s);
 558
 559     qemu_chr_fe_set_handlers(&s->chr, parallel_can_receive, NULL,
 560                              NULL, NULL, s, NULL, true);
 561     if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_STATUS, &dummy) == 0) {
 562         s->hw_driver = 1;
 563         s->status = dummy;
 564     }
 565
 566     isa_register_portio_list(isadev, &s->portio_list, base,
 567                              (s->hw_driver
 568                               ? &isa_parallel_portio_hw_list[0]
 569                               : &isa_parallel_portio_sw_list[0]),
 570                              s, "parallel");
 571 }
 572
 573 static void parallel_isa_build_aml(ISADevice *isadev, Aml *scope)
 574 {
 575     ISAParallelState *isa = ISA_PARALLEL(isadev);
 576     Aml *dev;
 577     Aml *crs;
 578
 579     crs = aml_resource_template();
 580     aml_append(crs, aml_io(AML_DECODE16, isa->iobase, isa->iobase, 0x08, 0x08));
 581     aml_append(crs, aml_irq_no_flags(isa->isairq));
 582
 583     dev = aml_device("LPT%d", isa->index + 1);
 584     aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0400")));
 585     aml_append(dev, aml_name_decl("_UID", aml_int(isa->index + 1)));
 586     aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
 587     aml_append(dev, aml_name_decl("_CRS", crs));
 588
 589     aml_append(scope, dev);
 590 }
 591
 592 /* Memory mapped interface */
 593 static uint64_t parallel_mm_readfn(void *opaque, hwaddr addr, unsigned size)
 594 {
 595     ParallelState *s = opaque;
 596
 597     return parallel_ioport_read_sw(s, addr >> s->it_shift) &
 598         MAKE_64BIT_MASK(0, size * 8);
 599 }
 600
 601 static void parallel_mm_writefn(void *opaque, hwaddr addr,
 602                                 uint64_t value, unsigned size)
 603 {
 604     ParallelState *s = opaque;
 605
 606     parallel_ioport_write_sw(s, addr >> s->it_shift,
 607                              value & MAKE_64BIT_MASK(0, size * 8));
 608 }
 609
 610 static const MemoryRegionOps parallel_mm_ops = {
 611     .read = parallel_mm_readfn,
 612     .write = parallel_mm_writefn,
 613     .valid.min_access_size = 1,
 614     .valid.max_access_size = 4,
 615     .endianness = DEVICE_NATIVE_ENDIAN,
 616 };
 617
 618 /* If fd is zero, it means that the parallel device uses the console */
 619 bool parallel_mm_init(MemoryRegion *address_space,
 620                       hwaddr base, int it_shift, qemu_irq irq,
 621                       Chardev *chr)
 622 {
 623     ParallelState *s;
 624
 625     s = g_malloc0(sizeof(ParallelState));
 626     s->irq = irq;
 627     qemu_chr_fe_init(&s->chr, chr, &error_abort);
 628     s->it_shift = it_shift;
 629     qemu_register_reset(parallel_reset, s);
 630
 631     memory_region_init_io(&s->iomem, NULL, &parallel_mm_ops, s,
 632                           "parallel", 8 << it_shift);
 633     memory_region_add_subregion(address_space, base, &s->iomem);
 634     return true;
 635 }
 636
 637 static Property parallel_isa_properties[] = {
 638     DEFINE_PROP_UINT32("index", ISAParallelState, index,   -1),
 639     DEFINE_PROP_UINT32("iobase", ISAParallelState, iobase,  -1),
 640     DEFINE_PROP_UINT32("irq",   ISAParallelState, isairq,  7),
 641     DEFINE_PROP_CHR("chardev",  ISAParallelState, state.chr),
 642     DEFINE_PROP_END_OF_LIST(),
 643 };
 644
 645 static void parallel_isa_class_initfn(ObjectClass *klass, void *data)
 646 {
 647     DeviceClass *dc = DEVICE_CLASS(klass);
 648     ISADeviceClass *isa = ISA_DEVICE_CLASS(klass);
 649
 650     dc->realize = parallel_isa_realizefn;
 651     dc->vmsd = &vmstate_parallel_isa;
 652     isa->build_aml = parallel_isa_build_aml;
 653     device_class_set_props(dc, parallel_isa_properties);
 654     set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
 655 }
 656
 657 static const TypeInfo parallel_isa_info = {
 658     .name          = TYPE_ISA_PARALLEL,
 659     .parent        = TYPE_ISA_DEVICE,
 660     .instance_size = sizeof(ISAParallelState),
 661     .class_init    = parallel_isa_class_initfn,
 662 };
 663
 664 static void parallel_register_types(void)
 665 {
 666     type_register_static(&parallel_isa_info);
 667 }
 668
 669 type_init(parallel_register_types)