ehci: Use uframe precision for interrupt threshold checking (v2)
[qemu/ar7.git] / hw / xen_pt.h
blobe3497302cf41dc5dee8b59e6e2b7b6f68dd50fd6
1 #ifndef XEN_PT_H
2 #define XEN_PT_H
4 #include "qemu-common.h"
5 #include "xen_common.h"
6 #include "pci/pci.h"
7 #include "xen-host-pci-device.h"
9 void xen_pt_log(const PCIDevice *d, const char *f, ...) GCC_FMT_ATTR(2, 3);
11 #define XEN_PT_ERR(d, _f, _a...) xen_pt_log(d, "%s: Error: "_f, __func__, ##_a)
13 #ifdef XEN_PT_LOGGING_ENABLED
14 # define XEN_PT_LOG(d, _f, _a...) xen_pt_log(d, "%s: " _f, __func__, ##_a)
15 # define XEN_PT_WARN(d, _f, _a...) \
16 xen_pt_log(d, "%s: Warning: "_f, __func__, ##_a)
17 #else
18 # define XEN_PT_LOG(d, _f, _a...)
19 # define XEN_PT_WARN(d, _f, _a...)
20 #endif
22 #ifdef XEN_PT_DEBUG_PCI_CONFIG_ACCESS
23 # define XEN_PT_LOG_CONFIG(d, addr, val, len) \
24 xen_pt_log(d, "%s: address=0x%04x val=0x%08x len=%d\n", \
25 __func__, addr, val, len)
26 #else
27 # define XEN_PT_LOG_CONFIG(d, addr, val, len)
28 #endif
31 /* Helper */
32 #define XEN_PFN(x) ((x) >> XC_PAGE_SHIFT)
34 typedef struct XenPTRegInfo XenPTRegInfo;
35 typedef struct XenPTReg XenPTReg;
37 typedef struct XenPCIPassthroughState XenPCIPassthroughState;
39 /* function type for config reg */
40 typedef int (*xen_pt_conf_reg_init)
41 (XenPCIPassthroughState *, XenPTRegInfo *, uint32_t real_offset,
42 uint32_t *data);
43 typedef int (*xen_pt_conf_dword_write)
44 (XenPCIPassthroughState *, XenPTReg *cfg_entry,
45 uint32_t *val, uint32_t dev_value, uint32_t valid_mask);
46 typedef int (*xen_pt_conf_word_write)
47 (XenPCIPassthroughState *, XenPTReg *cfg_entry,
48 uint16_t *val, uint16_t dev_value, uint16_t valid_mask);
49 typedef int (*xen_pt_conf_byte_write)
50 (XenPCIPassthroughState *, XenPTReg *cfg_entry,
51 uint8_t *val, uint8_t dev_value, uint8_t valid_mask);
52 typedef int (*xen_pt_conf_dword_read)
53 (XenPCIPassthroughState *, XenPTReg *cfg_entry,
54 uint32_t *val, uint32_t valid_mask);
55 typedef int (*xen_pt_conf_word_read)
56 (XenPCIPassthroughState *, XenPTReg *cfg_entry,
57 uint16_t *val, uint16_t valid_mask);
58 typedef int (*xen_pt_conf_byte_read)
59 (XenPCIPassthroughState *, XenPTReg *cfg_entry,
60 uint8_t *val, uint8_t valid_mask);
62 #define XEN_PT_BAR_ALLF 0xFFFFFFFF
63 #define XEN_PT_BAR_UNMAPPED (-1)
65 #define PCI_CAP_MAX 48
68 typedef enum {
69 XEN_PT_GRP_TYPE_HARDWIRED = 0, /* 0 Hardwired reg group */
70 XEN_PT_GRP_TYPE_EMU, /* emul reg group */
71 } XenPTRegisterGroupType;
73 typedef enum {
74 XEN_PT_BAR_FLAG_MEM = 0, /* Memory type BAR */
75 XEN_PT_BAR_FLAG_IO, /* I/O type BAR */
76 XEN_PT_BAR_FLAG_UPPER, /* upper 64bit BAR */
77 XEN_PT_BAR_FLAG_UNUSED, /* unused BAR */
78 } XenPTBarFlag;
81 typedef struct XenPTRegion {
82 /* BAR flag */
83 XenPTBarFlag bar_flag;
84 /* Translation of the emulated address */
85 union {
86 uint64_t maddr;
87 uint64_t pio_base;
88 uint64_t u;
89 } access;
90 } XenPTRegion;
92 /* XenPTRegInfo declaration
93 * - only for emulated register (either a part or whole bit).
94 * - for passthrough register that need special behavior (like interacting with
95 * other component), set emu_mask to all 0 and specify r/w func properly.
96 * - do NOT use ALL F for init_val, otherwise the tbl will not be registered.
99 /* emulated register information */
100 struct XenPTRegInfo {
101 uint32_t offset;
102 uint32_t size;
103 uint32_t init_val;
104 /* reg read only field mask (ON:RO/ROS, OFF:other) */
105 uint32_t ro_mask;
106 /* reg emulate field mask (ON:emu, OFF:passthrough) */
107 uint32_t emu_mask;
108 /* no write back allowed */
109 uint32_t no_wb;
110 xen_pt_conf_reg_init init;
111 /* read/write function pointer
112 * for double_word/word/byte size */
113 union {
114 struct {
115 xen_pt_conf_dword_write write;
116 xen_pt_conf_dword_read read;
117 } dw;
118 struct {
119 xen_pt_conf_word_write write;
120 xen_pt_conf_word_read read;
121 } w;
122 struct {
123 xen_pt_conf_byte_write write;
124 xen_pt_conf_byte_read read;
125 } b;
126 } u;
129 /* emulated register management */
130 struct XenPTReg {
131 QLIST_ENTRY(XenPTReg) entries;
132 XenPTRegInfo *reg;
133 uint32_t data; /* emulated value */
136 typedef struct XenPTRegGroupInfo XenPTRegGroupInfo;
138 /* emul reg group size initialize method */
139 typedef int (*xen_pt_reg_size_init_fn)
140 (XenPCIPassthroughState *, const XenPTRegGroupInfo *,
141 uint32_t base_offset, uint8_t *size);
143 /* emulated register group information */
144 struct XenPTRegGroupInfo {
145 uint8_t grp_id;
146 XenPTRegisterGroupType grp_type;
147 uint8_t grp_size;
148 xen_pt_reg_size_init_fn size_init;
149 XenPTRegInfo *emu_regs;
152 /* emul register group management table */
153 typedef struct XenPTRegGroup {
154 QLIST_ENTRY(XenPTRegGroup) entries;
155 const XenPTRegGroupInfo *reg_grp;
156 uint32_t base_offset;
157 uint8_t size;
158 QLIST_HEAD(, XenPTReg) reg_tbl_list;
159 } XenPTRegGroup;
162 #define XEN_PT_UNASSIGNED_PIRQ (-1)
163 typedef struct XenPTMSI {
164 uint16_t flags;
165 uint32_t addr_lo; /* guest message address */
166 uint32_t addr_hi; /* guest message upper address */
167 uint16_t data; /* guest message data */
168 uint32_t ctrl_offset; /* saved control offset */
169 int pirq; /* guest pirq corresponding */
170 bool initialized; /* when guest MSI is initialized */
171 bool mapped; /* when pirq is mapped */
172 } XenPTMSI;
174 typedef struct XenPTMSIXEntry {
175 int pirq;
176 uint64_t addr;
177 uint32_t data;
178 uint32_t vector_ctrl;
179 bool updated; /* indicate whether MSI ADDR or DATA is updated */
180 } XenPTMSIXEntry;
181 typedef struct XenPTMSIX {
182 uint32_t ctrl_offset;
183 bool enabled;
184 int total_entries;
185 int bar_index;
186 uint64_t table_base;
187 uint32_t table_offset_adjust; /* page align mmap */
188 uint64_t mmio_base_addr;
189 MemoryRegion mmio;
190 void *phys_iomem_base;
191 XenPTMSIXEntry msix_entry[0];
192 } XenPTMSIX;
194 struct XenPCIPassthroughState {
195 PCIDevice dev;
197 PCIHostDeviceAddress hostaddr;
198 bool is_virtfn;
199 XenHostPCIDevice real_device;
200 XenPTRegion bases[PCI_NUM_REGIONS]; /* Access regions */
201 QLIST_HEAD(, XenPTRegGroup) reg_grps;
203 uint32_t machine_irq;
205 XenPTMSI *msi;
206 XenPTMSIX *msix;
208 MemoryRegion bar[PCI_NUM_REGIONS - 1];
209 MemoryRegion rom;
211 MemoryListener memory_listener;
212 MemoryListener io_listener;
215 int xen_pt_config_init(XenPCIPassthroughState *s);
216 void xen_pt_config_delete(XenPCIPassthroughState *s);
217 XenPTRegGroup *xen_pt_find_reg_grp(XenPCIPassthroughState *s, uint32_t address);
218 XenPTReg *xen_pt_find_reg(XenPTRegGroup *reg_grp, uint32_t address);
219 int xen_pt_bar_offset_to_index(uint32_t offset);
221 static inline pcibus_t xen_pt_get_emul_size(XenPTBarFlag flag, pcibus_t r_size)
223 /* align resource size (memory type only) */
224 if (flag == XEN_PT_BAR_FLAG_MEM) {
225 return (r_size + XC_PAGE_SIZE - 1) & XC_PAGE_MASK;
226 } else {
227 return r_size;
231 /* INTx */
232 /* The PCI Local Bus Specification, Rev. 3.0,
233 * Section 6.2.4 Miscellaneous Registers, pp 223
234 * outlines 5 valid values for the interrupt pin (intx).
235 * 0: For devices (or device functions) that don't use an interrupt in
236 * 1: INTA#
237 * 2: INTB#
238 * 3: INTC#
239 * 4: INTD#
241 * Xen uses the following 4 values for intx
242 * 0: INTA#
243 * 1: INTB#
244 * 2: INTC#
245 * 3: INTD#
247 * Observing that these list of values are not the same, xen_pt_pci_read_intx()
248 * uses the following mapping from hw to xen values.
249 * This seems to reflect the current usage within Xen.
251 * PCI hardware | Xen | Notes
252 * ----------------+-----+----------------------------------------------------
253 * 0 | 0 | No interrupt
254 * 1 | 0 | INTA#
255 * 2 | 1 | INTB#
256 * 3 | 2 | INTC#
257 * 4 | 3 | INTD#
258 * any other value | 0 | This should never happen, log error message
261 static inline uint8_t xen_pt_pci_read_intx(XenPCIPassthroughState *s)
263 uint8_t v = 0;
264 xen_host_pci_get_byte(&s->real_device, PCI_INTERRUPT_PIN, &v);
265 return v;
268 static inline uint8_t xen_pt_pci_intx(XenPCIPassthroughState *s)
270 uint8_t r_val = xen_pt_pci_read_intx(s);
272 XEN_PT_LOG(&s->dev, "intx=%i\n", r_val);
273 if (r_val < 1 || r_val > 4) {
274 XEN_PT_LOG(&s->dev, "Interrupt pin read from hardware is out of range:"
275 " value=%i, acceptable range is 1 - 4\n", r_val);
276 r_val = 0;
277 } else {
278 r_val -= 1;
281 return r_val;
284 /* MSI/MSI-X */
285 int xen_pt_msi_set_enable(XenPCIPassthroughState *s, bool en);
286 int xen_pt_msi_setup(XenPCIPassthroughState *s);
287 int xen_pt_msi_update(XenPCIPassthroughState *d);
288 void xen_pt_msi_disable(XenPCIPassthroughState *s);
290 int xen_pt_msix_init(XenPCIPassthroughState *s, uint32_t base);
291 void xen_pt_msix_delete(XenPCIPassthroughState *s);
292 int xen_pt_msix_update(XenPCIPassthroughState *s);
293 int xen_pt_msix_update_remap(XenPCIPassthroughState *s, int bar_index);
294 void xen_pt_msix_disable(XenPCIPassthroughState *s);
296 static inline bool xen_pt_has_msix_mapping(XenPCIPassthroughState *s, int bar)
298 return s->msix && s->msix->bar_index == bar;
302 #endif /* !XEN_PT_H */