hw/m25p80.c

   1 /*
   2  * ST M25P80 emulator. Emulate all SPI flash devices based on the m25p80 command
   3  * set. Known devices table current as of Jun/2012 and taken from linux.
   4  * See drivers/mtd/devices/m25p80.c.
   5  *
   6  * Copyright (C) 2011 Edgar E. Iglesias <edgar.iglesias@gmail.com>
   7  * Copyright (C) 2012 Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
   8  * Copyright (C) 2012 PetaLogix
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 or
  13  * (at your option) a later version of the License.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License along
  21  * with this program; if not, see <http://www.gnu.org/licenses/>.
  22  */
  23
  24 #include "hw.h"
  25 #include "sysemu/blockdev.h"
  26 #include "ssi.h"
  27 #include "devices.h"
  28
  29 #ifdef M25P80_ERR_DEBUG
  30 #define DB_PRINT(...) do { \
  31     fprintf(stderr,  ": %s: ", __func__); \
  32     fprintf(stderr, ## __VA_ARGS__); \
  33     } while (0);
  34 #else
  35     #define DB_PRINT(...)
  36 #endif
  37
  38 /* Fields for FlashPartInfo->flags */
  39
  40 /* erase capabilities */
  41 #define ER_4K 1
  42 #define ER_32K 2
  43 /* set to allow the page program command to write 0s back to 1. Useful for
  44  * modelling EEPROM with SPI flash command set
  45  */
  46 #define WR_1 0x100
  47
  48 typedef struct FlashPartInfo {
  49     const char *part_name;
  50     /* jedec code. (jedec >> 16) & 0xff is the 1st byte, >> 8 the 2nd etc */
  51     uint32_t jedec;
  52     /* extended jedec code */
  53     uint16_t ext_jedec;
  54     /* there is confusion between manufacturers as to what a sector is. In this
  55      * device model, a "sector" is the size that is erased by the ERASE_SECTOR
  56      * command (opcode 0xd8).
  57      */
  58     uint32_t sector_size;
  59     uint32_t n_sectors;
  60     uint32_t page_size;
  61     uint8_t flags;
  62 } FlashPartInfo;
  63
  64 /* adapted from linux */
  65
  66 #define INFO(_part_name, _jedec, _ext_jedec, _sector_size, _n_sectors, _flags)\
  67     .part_name = (_part_name),\
  68     .jedec = (_jedec),\
  69     .ext_jedec = (_ext_jedec),\
  70     .sector_size = (_sector_size),\
  71     .n_sectors = (_n_sectors),\
  72     .page_size = 256,\
  73     .flags = (_flags),\
  74
  75 #define JEDEC_NUMONYX 0x20
  76 #define JEDEC_WINBOND 0xEF
  77 #define JEDEC_SPANSION 0x01
  78
  79 static const FlashPartInfo known_devices[] = {
  80     /* Atmel -- some are (confusingly) marketed as "DataFlash" */
  81     { INFO("at25fs010",   0x1f6601,      0,  32 << 10,   4, ER_4K) },
  82     { INFO("at25fs040",   0x1f6604,      0,  64 << 10,   8, ER_4K) },
  83
  84     { INFO("at25df041a",  0x1f4401,      0,  64 << 10,   8, ER_4K) },
  85     { INFO("at25df321a",  0x1f4701,      0,  64 << 10,  64, ER_4K) },
  86     { INFO("at25df641",   0x1f4800,      0,  64 << 10, 128, ER_4K) },
  87
  88     { INFO("at26f004",    0x1f0400,      0,  64 << 10,   8, ER_4K) },
  89     { INFO("at26df081a",  0x1f4501,      0,  64 << 10,  16, ER_4K) },
  90     { INFO("at26df161a",  0x1f4601,      0,  64 << 10,  32, ER_4K) },
  91     { INFO("at26df321",   0x1f4700,      0,  64 << 10,  64, ER_4K) },
  92
  93     /* EON -- en25xxx */
  94     { INFO("en25f32",     0x1c3116,      0,  64 << 10,  64, ER_4K) },
  95     { INFO("en25p32",     0x1c2016,      0,  64 << 10,  64, 0) },
  96     { INFO("en25q32b",    0x1c3016,      0,  64 << 10,  64, 0) },
  97     { INFO("en25p64",     0x1c2017,      0,  64 << 10, 128, 0) },
  98
  99     /* Intel/Numonyx -- xxxs33b */
 100     { INFO("160s33b",     0x898911,      0,  64 << 10,  32, 0) },
 101     { INFO("320s33b",     0x898912,      0,  64 << 10,  64, 0) },
 102     { INFO("640s33b",     0x898913,      0,  64 << 10, 128, 0) },
 103
 104     /* Macronix */
 105     { INFO("mx25l4005a",  0xc22013,      0,  64 << 10,   8, ER_4K) },
 106     { INFO("mx25l8005",   0xc22014,      0,  64 << 10,  16, 0) },
 107     { INFO("mx25l1606e",  0xc22015,      0,  64 << 10,  32, ER_4K) },
 108     { INFO("mx25l3205d",  0xc22016,      0,  64 << 10,  64, 0) },
 109     { INFO("mx25l6405d",  0xc22017,      0,  64 << 10, 128, 0) },
 110     { INFO("mx25l12805d", 0xc22018,      0,  64 << 10, 256, 0) },
 111     { INFO("mx25l12855e", 0xc22618,      0,  64 << 10, 256, 0) },
 112     { INFO("mx25l25635e", 0xc22019,      0,  64 << 10, 512, 0) },
 113     { INFO("mx25l25655e", 0xc22619,      0,  64 << 10, 512, 0) },
 114
 115     /* Spansion -- single (large) sector size only, at least
 116      * for the chips listed here (without boot sectors).
 117      */
 118     { INFO("s25sl004a",   0x010212,      0,  64 << 10,   8, 0) },
 119     { INFO("s25sl008a",   0x010213,      0,  64 << 10,  16, 0) },
 120     { INFO("s25sl016a",   0x010214,      0,  64 << 10,  32, 0) },
 121     { INFO("s25sl032a",   0x010215,      0,  64 << 10,  64, 0) },
 122     { INFO("s25sl032p",   0x010215, 0x4d00,  64 << 10,  64, ER_4K) },
 123     { INFO("s25sl064a",   0x010216,      0,  64 << 10, 128, 0) },
 124     { INFO("s25fl256s0",  0x010219, 0x4d00, 256 << 10, 128, 0) },
 125     { INFO("s25fl256s1",  0x010219, 0x4d01,  64 << 10, 512, 0) },
 126     { INFO("s25fl512s",   0x010220, 0x4d00, 256 << 10, 256, 0) },
 127     { INFO("s70fl01gs",   0x010221, 0x4d00, 256 << 10, 256, 0) },
 128     { INFO("s25sl12800",  0x012018, 0x0300, 256 << 10,  64, 0) },
 129     { INFO("s25sl12801",  0x012018, 0x0301,  64 << 10, 256, 0) },
 130     { INFO("s25fl129p0",  0x012018, 0x4d00, 256 << 10,  64, 0) },
 131     { INFO("s25fl129p1",  0x012018, 0x4d01,  64 << 10, 256, 0) },
 132     { INFO("s25fl016k",   0xef4015,      0,  64 << 10,  32, ER_4K | ER_32K) },
 133     { INFO("s25fl064k",   0xef4017,      0,  64 << 10, 128, ER_4K | ER_32K) },
 134
 135     /* SST -- large erase sizes are "overlays", "sectors" are 4<< 10 */
 136     { INFO("sst25vf040b", 0xbf258d,      0,  64 << 10,   8, ER_4K) },
 137     { INFO("sst25vf080b", 0xbf258e,      0,  64 << 10,  16, ER_4K) },
 138     { INFO("sst25vf016b", 0xbf2541,      0,  64 << 10,  32, ER_4K) },
 139     { INFO("sst25vf032b", 0xbf254a,      0,  64 << 10,  64, ER_4K) },
 140     { INFO("sst25wf512",  0xbf2501,      0,  64 << 10,   1, ER_4K) },
 141     { INFO("sst25wf010",  0xbf2502,      0,  64 << 10,   2, ER_4K) },
 142     { INFO("sst25wf020",  0xbf2503,      0,  64 << 10,   4, ER_4K) },
 143     { INFO("sst25wf040",  0xbf2504,      0,  64 << 10,   8, ER_4K) },
 144
 145     /* ST Microelectronics -- newer production may have feature updates */
 146     { INFO("m25p05",      0x202010,      0,  32 << 10,   2, 0) },
 147     { INFO("m25p10",      0x202011,      0,  32 << 10,   4, 0) },
 148     { INFO("m25p20",      0x202012,      0,  64 << 10,   4, 0) },
 149     { INFO("m25p40",      0x202013,      0,  64 << 10,   8, 0) },
 150     { INFO("m25p80",      0x202014,      0,  64 << 10,  16, 0) },
 151     { INFO("m25p16",      0x202015,      0,  64 << 10,  32, 0) },
 152     { INFO("m25p32",      0x202016,      0,  64 << 10,  64, 0) },
 153     { INFO("m25p64",      0x202017,      0,  64 << 10, 128, 0) },
 154     { INFO("m25p128",     0x202018,      0, 256 << 10,  64, 0) },
 155
 156     { INFO("m45pe10",     0x204011,      0,  64 << 10,   2, 0) },
 157     { INFO("m45pe80",     0x204014,      0,  64 << 10,  16, 0) },
 158     { INFO("m45pe16",     0x204015,      0,  64 << 10,  32, 0) },
 159
 160     { INFO("m25pe80",     0x208014,      0,  64 << 10,  16, 0) },
 161     { INFO("m25pe16",     0x208015,      0,  64 << 10,  32, ER_4K) },
 162
 163     { INFO("m25px32",     0x207116,      0,  64 << 10,  64, ER_4K) },
 164     { INFO("m25px32-s0",  0x207316,      0,  64 << 10,  64, ER_4K) },
 165     { INFO("m25px32-s1",  0x206316,      0,  64 << 10,  64, ER_4K) },
 166     { INFO("m25px64",     0x207117,      0,  64 << 10, 128, 0) },
 167
 168     /* Winbond -- w25x "blocks" are 64k, "sectors" are 4KiB */
 169     { INFO("w25x10",      0xef3011,      0,  64 << 10,   2, ER_4K) },
 170     { INFO("w25x20",      0xef3012,      0,  64 << 10,   4, ER_4K) },
 171     { INFO("w25x40",      0xef3013,      0,  64 << 10,   8, ER_4K) },
 172     { INFO("w25x80",      0xef3014,      0,  64 << 10,  16, ER_4K) },
 173     { INFO("w25x16",      0xef3015,      0,  64 << 10,  32, ER_4K) },
 174     { INFO("w25x32",      0xef3016,      0,  64 << 10,  64, ER_4K) },
 175     { INFO("w25q32",      0xef4016,      0,  64 << 10,  64, ER_4K) },
 176     { INFO("w25x64",      0xef3017,      0,  64 << 10, 128, ER_4K) },
 177     { INFO("w25q64",      0xef4017,      0,  64 << 10, 128, ER_4K) },
 178
 179     /* Numonyx -- n25q128 */
 180     { INFO("n25q128",      0x20ba18,      0,  64 << 10, 256, 0) },
 181
 182     { },
 183 };
 184
 185 typedef enum {
 186     NOP = 0,
 187     WRDI = 0x4,
 188     RDSR = 0x5,
 189     WREN = 0x6,
 190     JEDEC_READ = 0x9f,
 191     BULK_ERASE = 0xc7,
 192
 193     READ = 0x3,
 194     FAST_READ = 0xb,
 195     DOR = 0x3b,
 196     QOR = 0x6b,
 197     DIOR = 0xbb,
 198     QIOR = 0xeb,
 199
 200     PP = 0x2,
 201     DPP = 0xa2,
 202     QPP = 0x32,
 203
 204     ERASE_4K = 0x20,
 205     ERASE_32K = 0x52,
 206     ERASE_SECTOR = 0xd8,
 207 } FlashCMD;
 208
 209 typedef enum {
 210     STATE_IDLE,
 211     STATE_PAGE_PROGRAM,
 212     STATE_READ,
 213     STATE_COLLECTING_DATA,
 214     STATE_READING_DATA,
 215 } CMDState;
 216
 217 typedef struct Flash {
 218     SSISlave ssidev;
 219     uint32_t r;
 220
 221     BlockDriverState *bdrv;
 222
 223     uint8_t *storage;
 224     uint32_t size;
 225     int page_size;
 226
 227     uint8_t state;
 228     uint8_t data[16];
 229     uint32_t len;
 230     uint32_t pos;
 231     uint8_t needed_bytes;
 232     uint8_t cmd_in_progress;
 233     uint64_t cur_addr;
 234     bool write_enable;
 235
 236     int64_t dirty_page;
 237
 238     char *part_name;
 239     const FlashPartInfo *pi;
 240
 241 } Flash;
 242
 243 static void bdrv_sync_complete(void *opaque, int ret)
 244 {
 245     /* do nothing. Masters do not directly interact with the backing store,
 246      * only the working copy so no mutexing required.
 247      */
 248 }
 249
 250 static void flash_sync_page(Flash *s, int page)
 251 {
 252     if (s->bdrv) {
 253         int bdrv_sector, nb_sectors;
 254         QEMUIOVector iov;
 255
 256         bdrv_sector = (page * s->pi->page_size) / BDRV_SECTOR_SIZE;
 257         nb_sectors = DIV_ROUND_UP(s->pi->page_size, BDRV_SECTOR_SIZE);
 258         qemu_iovec_init(&iov, 1);
 259         qemu_iovec_add(&iov, s->storage + bdrv_sector * BDRV_SECTOR_SIZE,
 260                                                 nb_sectors * BDRV_SECTOR_SIZE);
 261         bdrv_aio_writev(s->bdrv, bdrv_sector, &iov, nb_sectors,
 262                                                 bdrv_sync_complete, NULL);
 263     }
 264 }
 265
 266 static inline void flash_sync_area(Flash *s, int64_t off, int64_t len)
 267 {
 268     int64_t start, end, nb_sectors;
 269     QEMUIOVector iov;
 270
 271     if (!s->bdrv) {
 272         return;
 273     }
 274
 275     assert(!(len % BDRV_SECTOR_SIZE));
 276     start = off / BDRV_SECTOR_SIZE;
 277     end = (off + len) / BDRV_SECTOR_SIZE;
 278     nb_sectors = end - start;
 279     qemu_iovec_init(&iov, 1);
 280     qemu_iovec_add(&iov, s->storage + (start * BDRV_SECTOR_SIZE),
 281                                         nb_sectors * BDRV_SECTOR_SIZE);
 282     bdrv_aio_writev(s->bdrv, start, &iov, nb_sectors, bdrv_sync_complete, NULL);
 283 }
 284
 285 static void flash_erase(Flash *s, int offset, FlashCMD cmd)
 286 {
 287     uint32_t len;
 288     uint8_t capa_to_assert = 0;
 289
 290     switch (cmd) {
 291     case ERASE_4K:
 292         len = 4 << 10;
 293         capa_to_assert = ER_4K;
 294         break;
 295     case ERASE_32K:
 296         len = 32 << 10;
 297         capa_to_assert = ER_32K;
 298         break;
 299     case ERASE_SECTOR:
 300         len = s->pi->sector_size;
 301         break;
 302     case BULK_ERASE:
 303         len = s->size;
 304         break;
 305     default:
 306         abort();
 307     }
 308
 309     DB_PRINT("offset = %#x, len = %d\n", offset, len);
 310     if ((s->pi->flags & capa_to_assert) != capa_to_assert) {
 311         hw_error("m25p80: %dk erase size not supported by device\n", len);
 312     }
 313
 314     if (!s->write_enable) {
 315         DB_PRINT("erase with write protect!\n");
 316         return;
 317     }
 318     memset(s->storage + offset, 0xff, len);
 319     flash_sync_area(s, offset, len);
 320 }
 321
 322 static inline void flash_sync_dirty(Flash *s, int64_t newpage)
 323 {
 324     if (s->dirty_page >= 0 && s->dirty_page != newpage) {
 325         flash_sync_page(s, s->dirty_page);
 326         s->dirty_page = newpage;
 327     }
 328 }
 329
 330 static inline
 331 void flash_write8(Flash *s, uint64_t addr, uint8_t data)
 332 {
 333     int64_t page = addr / s->pi->page_size;
 334     uint8_t prev = s->storage[s->cur_addr];
 335
 336     if (!s->write_enable) {
 337         DB_PRINT("write with write protect!\n");
 338     }
 339
 340     if ((prev ^ data) & data) {
 341         DB_PRINT("programming zero to one! addr=%lx  %x -> %x\n",
 342                   addr, prev, data);
 343     }
 344
 345     if (s->pi->flags & WR_1) {
 346         s->storage[s->cur_addr] = data;
 347     } else {
 348         s->storage[s->cur_addr] &= data;
 349     }
 350
 351     flash_sync_dirty(s, page);
 352     s->dirty_page = page;
 353 }
 354
 355 static void complete_collecting_data(Flash *s)
 356 {
 357     s->cur_addr = s->data[0] << 16;
 358     s->cur_addr |= s->data[1] << 8;
 359     s->cur_addr |= s->data[2];
 360
 361     switch (s->cmd_in_progress) {
 362     case DPP:
 363     case QPP:
 364     case PP:
 365         s->state = STATE_PAGE_PROGRAM;
 366         break;
 367     case READ:
 368     case FAST_READ:
 369     case DOR:
 370     case QOR:
 371     case DIOR:
 372     case QIOR:
 373         s->state = STATE_READ;
 374         break;
 375     case ERASE_4K:
 376     case ERASE_32K:
 377     case ERASE_SECTOR:
 378         flash_erase(s, s->cur_addr, s->cmd_in_progress);
 379         break;
 380     default:
 381         break;
 382     }
 383 }
 384
 385 static void decode_new_cmd(Flash *s, uint32_t value)
 386 {
 387     s->cmd_in_progress = value;
 388     DB_PRINT("decoded new command:%x\n", value);
 389
 390     switch (value) {
 391
 392     case ERASE_4K:
 393     case ERASE_32K:
 394     case ERASE_SECTOR:
 395     case READ:
 396     case DPP:
 397     case QPP:
 398     case PP:
 399         s->needed_bytes = 3;
 400         s->pos = 0;
 401         s->len = 0;
 402         s->state = STATE_COLLECTING_DATA;
 403         break;
 404
 405     case FAST_READ:
 406     case DOR:
 407     case QOR:
 408         s->needed_bytes = 4;
 409         s->pos = 0;
 410         s->len = 0;
 411         s->state = STATE_COLLECTING_DATA;
 412         break;
 413
 414     case DIOR:
 415         switch ((s->pi->jedec >> 16) & 0xFF) {
 416         case JEDEC_WINBOND:
 417         case JEDEC_SPANSION:
 418             s->needed_bytes = 4;
 419             break;
 420         case JEDEC_NUMONYX:
 421         default:
 422             s->needed_bytes = 5;
 423         }
 424         s->pos = 0;
 425         s->len = 0;
 426         s->state = STATE_COLLECTING_DATA;
 427         break;
 428
 429     case QIOR:
 430         switch ((s->pi->jedec >> 16) & 0xFF) {
 431         case JEDEC_WINBOND:
 432         case JEDEC_SPANSION:
 433             s->needed_bytes = 6;
 434             break;
 435         case JEDEC_NUMONYX:
 436         default:
 437             s->needed_bytes = 8;
 438         }
 439         s->pos = 0;
 440         s->len = 0;
 441         s->state = STATE_COLLECTING_DATA;
 442         break;
 443
 444     case WRDI:
 445         s->write_enable = false;
 446         break;
 447     case WREN:
 448         s->write_enable = true;
 449         break;
 450
 451     case RDSR:
 452         s->data[0] = (!!s->write_enable) << 1;
 453         s->pos = 0;
 454         s->len = 1;
 455         s->state = STATE_READING_DATA;
 456         break;
 457
 458     case JEDEC_READ:
 459         DB_PRINT("populated jedec code\n");
 460         s->data[0] = (s->pi->jedec >> 16) & 0xff;
 461         s->data[1] = (s->pi->jedec >> 8) & 0xff;
 462         s->data[2] = s->pi->jedec & 0xff;
 463         if (s->pi->ext_jedec) {
 464             s->data[3] = (s->pi->ext_jedec >> 8) & 0xff;
 465             s->data[4] = s->pi->ext_jedec & 0xff;
 466             s->len = 5;
 467         } else {
 468             s->len = 3;
 469         }
 470         s->pos = 0;
 471         s->state = STATE_READING_DATA;
 472         break;
 473
 474     case BULK_ERASE:
 475         if (s->write_enable) {
 476             DB_PRINT("chip erase\n");
 477             flash_erase(s, 0, BULK_ERASE);
 478         } else {
 479             DB_PRINT("chip erase with write protect!\n");
 480         }
 481         break;
 482     case NOP:
 483         break;
 484     default:
 485         DB_PRINT("Unknown cmd %x\n", value);
 486         break;
 487     }
 488 }
 489
 490 static int m25p80_cs(SSISlave *ss, bool select)
 491 {
 492     Flash *s = FROM_SSI_SLAVE(Flash, ss);
 493
 494     if (select) {
 495         s->len = 0;
 496         s->pos = 0;
 497         s->state = STATE_IDLE;
 498         flash_sync_dirty(s, -1);
 499     }
 500
 501     DB_PRINT("%sselect\n", select ? "de" : "");
 502
 503     return 0;
 504 }
 505
 506 static uint32_t m25p80_transfer8(SSISlave *ss, uint32_t tx)
 507 {
 508     Flash *s = FROM_SSI_SLAVE(Flash, ss);
 509     uint32_t r = 0;
 510
 511     switch (s->state) {
 512
 513     case STATE_PAGE_PROGRAM:
 514         DB_PRINT("page program cur_addr=%lx data=%x\n", s->cur_addr,
 515                  (uint8_t)tx);
 516         flash_write8(s, s->cur_addr, (uint8_t)tx);
 517         s->cur_addr++;
 518         break;
 519
 520     case STATE_READ:
 521         r = s->storage[s->cur_addr];
 522         DB_PRINT("READ 0x%lx=%x\n", s->cur_addr, r);
 523         s->cur_addr = (s->cur_addr + 1) % s->size;
 524         break;
 525
 526     case STATE_COLLECTING_DATA:
 527         s->data[s->len] = (uint8_t)tx;
 528         s->len++;
 529
 530         if (s->len == s->needed_bytes) {
 531             complete_collecting_data(s);
 532         }
 533         break;
 534
 535     case STATE_READING_DATA:
 536         r = s->data[s->pos];
 537         s->pos++;
 538         if (s->pos == s->len) {
 539             s->pos = 0;
 540             s->state = STATE_IDLE;
 541         }
 542         break;
 543
 544     default:
 545     case STATE_IDLE:
 546         decode_new_cmd(s, (uint8_t)tx);
 547         break;
 548     }
 549
 550     return r;
 551 }
 552
 553 static int m25p80_init(SSISlave *ss)
 554 {
 555     DriveInfo *dinfo;
 556     Flash *s = FROM_SSI_SLAVE(Flash, ss);
 557     const FlashPartInfo *i;
 558
 559     if (!s->part_name) { /* default to actual m25p80 if no partname given */
 560         s->part_name = (char *)"m25p80";
 561     }
 562
 563     i = known_devices;
 564     for (i = known_devices;; i++) {
 565         assert(i);
 566         if (!i->part_name) {
 567             fprintf(stderr, "Unknown SPI flash part: \"%s\"\n", s->part_name);
 568             return 1;
 569         } else if (!strcmp(i->part_name, s->part_name)) {
 570             s->pi = i;
 571             break;
 572         }
 573     }
 574
 575     s->size = s->pi->sector_size * s->pi->n_sectors;
 576     s->dirty_page = -1;
 577     s->storage = qemu_blockalign(s->bdrv, s->size);
 578
 579     dinfo = drive_get_next(IF_MTD);
 580
 581     if (dinfo && dinfo->bdrv) {
 582         DB_PRINT("Binding to IF_MTD drive\n");
 583         s->bdrv = dinfo->bdrv;
 584         /* FIXME: Move to late init */
 585         if (bdrv_read(s->bdrv, 0, s->storage, DIV_ROUND_UP(s->size,
 586                                                     BDRV_SECTOR_SIZE))) {
 587             fprintf(stderr, "Failed to initialize SPI flash!\n");
 588             return 1;
 589         }
 590     } else {
 591         memset(s->storage, 0xFF, s->size);
 592     }
 593
 594     return 0;
 595 }
 596
 597 static void m25p80_pre_save(void *opaque)
 598 {
 599     flash_sync_dirty((Flash *)opaque, -1);
 600 }
 601
 602 static const VMStateDescription vmstate_m25p80 = {
 603     .name = "xilinx_spi",
 604     .version_id = 1,
 605     .minimum_version_id = 1,
 606     .minimum_version_id_old = 1,
 607     .pre_save = m25p80_pre_save,
 608     .fields = (VMStateField[]) {
 609         VMSTATE_UINT8(state, Flash),
 610         VMSTATE_UINT8_ARRAY(data, Flash, 16),
 611         VMSTATE_UINT32(len, Flash),
 612         VMSTATE_UINT32(pos, Flash),
 613         VMSTATE_UINT8(needed_bytes, Flash),
 614         VMSTATE_UINT8(cmd_in_progress, Flash),
 615         VMSTATE_UINT64(cur_addr, Flash),
 616         VMSTATE_BOOL(write_enable, Flash),
 617         VMSTATE_END_OF_LIST()
 618     }
 619 };
 620
 621 static Property m25p80_properties[] = {
 622     DEFINE_PROP_STRING("partname", Flash, part_name),
 623     DEFINE_PROP_END_OF_LIST(),
 624 };
 625
 626 static void m25p80_class_init(ObjectClass *klass, void *data)
 627 {
 628     DeviceClass *dc = DEVICE_CLASS(klass);
 629     SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
 630
 631     k->init = m25p80_init;
 632     k->transfer = m25p80_transfer8;
 633     k->set_cs = m25p80_cs;
 634     k->cs_polarity = SSI_CS_LOW;
 635     dc->props = m25p80_properties;
 636     dc->vmsd = &vmstate_m25p80;
 637 }
 638
 639 static const TypeInfo m25p80_info = {
 640     .name           = "m25p80",
 641     .parent         = TYPE_SSI_SLAVE,
 642     .instance_size  = sizeof(Flash),
 643     .class_init     = m25p80_class_init,
 644 };
 645
 646 static void m25p80_register_types(void)
 647 {
 648     type_register_static(&m25p80_info);
 649 }
 650
 651 type_init(m25p80_register_types)