hw/apb_pci.c

   1 /*
   2  * QEMU Ultrasparc APB PCI host
   3  *
   4  * Copyright (c) 2006 Fabrice Bellard
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24
  25 /* XXX This file and most of its contents are somewhat misnamed.  The
  26    Ultrasparc PCI host is called the PCI Bus Module (PBM).  The APB is
  27    the secondary PCI bridge.  */
  28
  29 #include "sysbus.h"
  30 #include "pci/pci.h"
  31 #include "pci/pci_host.h"
  32 #include "pci/pci_bridge.h"
  33 #include "pci/pci_bus.h"
  34 #include "apb_pci.h"
  35 #include "sysemu/sysemu.h"
  36 #include "exec/address-spaces.h"
  37
  38 /* debug APB */
  39 //#define DEBUG_APB
  40
  41 #ifdef DEBUG_APB
  42 #define APB_DPRINTF(fmt, ...) \
  43 do { printf("APB: " fmt , ## __VA_ARGS__); } while (0)
  44 #else
  45 #define APB_DPRINTF(fmt, ...)
  46 #endif
  47
  48 /*
  49  * Chipset docs:
  50  * PBM: "UltraSPARC IIi User's Manual",
  51  * http://www.sun.com/processors/manuals/805-0087.pdf
  52  *
  53  * APB: "Advanced PCI Bridge (APB) User's Manual",
  54  * http://www.sun.com/processors/manuals/805-1251.pdf
  55  */
  56
  57 #define PBM_PCI_IMR_MASK    0x7fffffff
  58 #define PBM_PCI_IMR_ENABLED 0x80000000
  59
  60 #define POR          (1 << 31)
  61 #define SOFT_POR     (1 << 30)
  62 #define SOFT_XIR     (1 << 29)
  63 #define BTN_POR      (1 << 28)
  64 #define BTN_XIR      (1 << 27)
  65 #define RESET_MASK   0xf8000000
  66 #define RESET_WCMASK 0x98000000
  67 #define RESET_WMASK  0x60000000
  68
  69 #define MAX_IVEC 0x30
  70
  71 typedef struct APBState {
  72     SysBusDevice busdev;
  73     PCIBus      *bus;
  74     MemoryRegion apb_config;
  75     MemoryRegion pci_config;
  76     MemoryRegion pci_mmio;
  77     MemoryRegion pci_ioport;
  78     uint32_t iommu[4];
  79     uint32_t pci_control[16];
  80     uint32_t pci_irq_map[8];
  81     uint32_t obio_irq_map[32];
  82     qemu_irq *pbm_irqs;
  83     qemu_irq *ivec_irqs;
  84     uint32_t reset_control;
  85     unsigned int nr_resets;
  86 } APBState;
  87
  88 static void pci_apb_set_irq(void *opaque, int irq_num, int level);
  89
  90 static void apb_config_writel (void *opaque, hwaddr addr,
  91                                uint64_t val, unsigned size)
  92 {
  93     APBState *s = opaque;
  94
  95     APB_DPRINTF("%s: addr " TARGET_FMT_lx " val %" PRIx64 "\n", __func__, addr, val);
  96
  97     switch (addr & 0xffff) {
  98     case 0x30 ... 0x4f: /* DMA error registers */
  99         /* XXX: not implemented yet */
 100         break;
 101     case 0x200 ... 0x20b: /* IOMMU */
 102         s->iommu[(addr & 0xf) >> 2] = val;
 103         break;
 104     case 0x20c ... 0x3ff: /* IOMMU flush */
 105         break;
 106     case 0xc00 ... 0xc3f: /* PCI interrupt control */
 107         if (addr & 4) {
 108             s->pci_irq_map[(addr & 0x3f) >> 3] &= PBM_PCI_IMR_MASK;
 109             s->pci_irq_map[(addr & 0x3f) >> 3] |= val & ~PBM_PCI_IMR_MASK;
 110         }
 111         break;
 112     case 0x1000 ... 0x1080: /* OBIO interrupt control */
 113         if (addr & 4) {
 114             s->obio_irq_map[(addr & 0xff) >> 3] &= PBM_PCI_IMR_MASK;
 115             s->obio_irq_map[(addr & 0xff) >> 3] |= val & ~PBM_PCI_IMR_MASK;
 116         }
 117         break;
 118     case 0x1400 ... 0x143f: /* PCI interrupt clear */
 119         if (addr & 4) {
 120             pci_apb_set_irq(s, (addr & 0x3f) >> 3, 0);
 121         }
 122         break;
 123     case 0x1800 ... 0x1860: /* OBIO interrupt clear */
 124         if (addr & 4) {
 125             pci_apb_set_irq(s, 0x20 | ((addr & 0xff) >> 3), 0);
 126         }
 127         break;
 128     case 0x2000 ... 0x202f: /* PCI control */
 129         s->pci_control[(addr & 0x3f) >> 2] = val;
 130         break;
 131     case 0xf020 ... 0xf027: /* Reset control */
 132         if (addr & 4) {
 133             val &= RESET_MASK;
 134             s->reset_control &= ~(val & RESET_WCMASK);
 135             s->reset_control |= val & RESET_WMASK;
 136             if (val & SOFT_POR) {
 137                 s->nr_resets = 0;
 138                 qemu_system_reset_request();
 139             } else if (val & SOFT_XIR) {
 140                 qemu_system_reset_request();
 141             }
 142         }
 143         break;
 144     case 0x5000 ... 0x51cf: /* PIO/DMA diagnostics */
 145     case 0xa400 ... 0xa67f: /* IOMMU diagnostics */
 146     case 0xa800 ... 0xa80f: /* Interrupt diagnostics */
 147     case 0xf000 ... 0xf01f: /* FFB config, memory control */
 148         /* we don't care */
 149     default:
 150         break;
 151     }
 152 }
 153
 154 static uint64_t apb_config_readl (void *opaque,
 155                                   hwaddr addr, unsigned size)
 156 {
 157     APBState *s = opaque;
 158     uint32_t val;
 159
 160     switch (addr & 0xffff) {
 161     case 0x30 ... 0x4f: /* DMA error registers */
 162         val = 0;
 163         /* XXX: not implemented yet */
 164         break;
 165     case 0x200 ... 0x20b: /* IOMMU */
 166         val = s->iommu[(addr & 0xf) >> 2];
 167         break;
 168     case 0x20c ... 0x3ff: /* IOMMU flush */
 169         val = 0;
 170         break;
 171     case 0xc00 ... 0xc3f: /* PCI interrupt control */
 172         if (addr & 4) {
 173             val = s->pci_irq_map[(addr & 0x3f) >> 3];
 174         } else {
 175             val = 0;
 176         }
 177         break;
 178     case 0x1000 ... 0x1080: /* OBIO interrupt control */
 179         if (addr & 4) {
 180             val = s->obio_irq_map[(addr & 0xff) >> 3];
 181         } else {
 182             val = 0;
 183         }
 184         break;
 185     case 0x2000 ... 0x202f: /* PCI control */
 186         val = s->pci_control[(addr & 0x3f) >> 2];
 187         break;
 188     case 0xf020 ... 0xf027: /* Reset control */
 189         if (addr & 4) {
 190             val = s->reset_control;
 191         } else {
 192             val = 0;
 193         }
 194         break;
 195     case 0x5000 ... 0x51cf: /* PIO/DMA diagnostics */
 196     case 0xa400 ... 0xa67f: /* IOMMU diagnostics */
 197     case 0xa800 ... 0xa80f: /* Interrupt diagnostics */
 198     case 0xf000 ... 0xf01f: /* FFB config, memory control */
 199         /* we don't care */
 200     default:
 201         val = 0;
 202         break;
 203     }
 204     APB_DPRINTF("%s: addr " TARGET_FMT_lx " -> %x\n", __func__, addr, val);
 205
 206     return val;
 207 }
 208
 209 static const MemoryRegionOps apb_config_ops = {
 210     .read = apb_config_readl,
 211     .write = apb_config_writel,
 212     .endianness = DEVICE_NATIVE_ENDIAN,
 213 };
 214
 215 static void apb_pci_config_write(void *opaque, hwaddr addr,
 216                                  uint64_t val, unsigned size)
 217 {
 218     APBState *s = opaque;
 219
 220     val = qemu_bswap_len(val, size);
 221     APB_DPRINTF("%s: addr " TARGET_FMT_lx " val %" PRIx64 "\n", __func__, addr, val);
 222     pci_data_write(s->bus, addr, val, size);
 223 }
 224
 225 static uint64_t apb_pci_config_read(void *opaque, hwaddr addr,
 226                                     unsigned size)
 227 {
 228     uint32_t ret;
 229     APBState *s = opaque;
 230
 231     ret = pci_data_read(s->bus, addr, size);
 232     ret = qemu_bswap_len(ret, size);
 233     APB_DPRINTF("%s: addr " TARGET_FMT_lx " -> %x\n", __func__, addr, ret);
 234     return ret;
 235 }
 236
 237 static void pci_apb_iowriteb (void *opaque, hwaddr addr,
 238                                   uint32_t val)
 239 {
 240     cpu_outb(addr & IOPORTS_MASK, val);
 241 }
 242
 243 static void pci_apb_iowritew (void *opaque, hwaddr addr,
 244                                   uint32_t val)
 245 {
 246     cpu_outw(addr & IOPORTS_MASK, bswap16(val));
 247 }
 248
 249 static void pci_apb_iowritel (void *opaque, hwaddr addr,
 250                                 uint32_t val)
 251 {
 252     cpu_outl(addr & IOPORTS_MASK, bswap32(val));
 253 }
 254
 255 static uint32_t pci_apb_ioreadb (void *opaque, hwaddr addr)
 256 {
 257     uint32_t val;
 258
 259     val = cpu_inb(addr & IOPORTS_MASK);
 260     return val;
 261 }
 262
 263 static uint32_t pci_apb_ioreadw (void *opaque, hwaddr addr)
 264 {
 265     uint32_t val;
 266
 267     val = bswap16(cpu_inw(addr & IOPORTS_MASK));
 268     return val;
 269 }
 270
 271 static uint32_t pci_apb_ioreadl (void *opaque, hwaddr addr)
 272 {
 273     uint32_t val;
 274
 275     val = bswap32(cpu_inl(addr & IOPORTS_MASK));
 276     return val;
 277 }
 278
 279 static const MemoryRegionOps pci_ioport_ops = {
 280     .old_mmio = {
 281         .read = { pci_apb_ioreadb, pci_apb_ioreadw, pci_apb_ioreadl },
 282         .write = { pci_apb_iowriteb, pci_apb_iowritew, pci_apb_iowritel, },
 283     },
 284     .endianness = DEVICE_NATIVE_ENDIAN,
 285 };
 286
 287 /* The APB host has an IRQ line for each IRQ line of each slot.  */
 288 static int pci_apb_map_irq(PCIDevice *pci_dev, int irq_num)
 289 {
 290     return ((pci_dev->devfn & 0x18) >> 1) + irq_num;
 291 }
 292
 293 static int pci_pbm_map_irq(PCIDevice *pci_dev, int irq_num)
 294 {
 295     int bus_offset;
 296     if (pci_dev->devfn & 1)
 297         bus_offset = 16;
 298     else
 299         bus_offset = 0;
 300     return bus_offset + irq_num;
 301 }
 302
 303 static void pci_apb_set_irq(void *opaque, int irq_num, int level)
 304 {
 305     APBState *s = opaque;
 306
 307     /* PCI IRQ map onto the first 32 INO.  */
 308     if (irq_num < 32) {
 309         if (s->pci_irq_map[irq_num >> 2] & PBM_PCI_IMR_ENABLED) {
 310             APB_DPRINTF("%s: set irq %d level %d\n", __func__, irq_num, level);
 311             qemu_set_irq(s->ivec_irqs[irq_num], level);
 312         } else {
 313             APB_DPRINTF("%s: not enabled: lower irq %d\n", __func__, irq_num);
 314             qemu_irq_lower(s->ivec_irqs[irq_num]);
 315         }
 316     } else {
 317         /* OBIO IRQ map onto the next 16 INO.  */
 318         if (s->obio_irq_map[irq_num - 32] & PBM_PCI_IMR_ENABLED) {
 319             APB_DPRINTF("%s: set irq %d level %d\n", __func__, irq_num, level);
 320             qemu_set_irq(s->ivec_irqs[irq_num], level);
 321         } else {
 322             APB_DPRINTF("%s: not enabled: lower irq %d\n", __func__, irq_num);
 323             qemu_irq_lower(s->ivec_irqs[irq_num]);
 324         }
 325     }
 326 }
 327
 328 static int apb_pci_bridge_initfn(PCIDevice *dev)
 329 {
 330     int rc;
 331
 332     rc = pci_bridge_initfn(dev);
 333     if (rc < 0) {
 334         return rc;
 335     }
 336
 337     /*
 338      * command register:
 339      * According to PCI bridge spec, after reset
 340      *   bus master bit is off
 341      *   memory space enable bit is off
 342      * According to manual (805-1251.pdf).
 343      *   the reset value should be zero unless the boot pin is tied high
 344      *   (which is true) and thus it should be PCI_COMMAND_MEMORY.
 345      */
 346     pci_set_word(dev->config + PCI_COMMAND,
 347                  PCI_COMMAND_MEMORY);
 348     pci_set_word(dev->config + PCI_STATUS,
 349                  PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ |
 350                  PCI_STATUS_DEVSEL_MEDIUM);
 351     return 0;
 352 }
 353
 354 PCIBus *pci_apb_init(hwaddr special_base,
 355                      hwaddr mem_base,
 356                      qemu_irq *ivec_irqs, PCIBus **bus2, PCIBus **bus3,
 357                      qemu_irq **pbm_irqs)
 358 {
 359     DeviceState *dev;
 360     SysBusDevice *s;
 361     APBState *d;
 362     PCIDevice *pci_dev;
 363     PCIBridge *br;
 364
 365     /* Ultrasparc PBM main bus */
 366     dev = qdev_create(NULL, "pbm");
 367     qdev_init_nofail(dev);
 368     s = sysbus_from_qdev(dev);
 369     /* apb_config */
 370     sysbus_mmio_map(s, 0, special_base);
 371     /* PCI configuration space */
 372     sysbus_mmio_map(s, 1, special_base + 0x1000000ULL);
 373     /* pci_ioport */
 374     sysbus_mmio_map(s, 2, special_base + 0x2000000ULL);
 375     d = FROM_SYSBUS(APBState, s);
 376
 377     memory_region_init(&d->pci_mmio, "pci-mmio", 0x100000000ULL);
 378     memory_region_add_subregion(get_system_memory(), mem_base, &d->pci_mmio);
 379
 380     d->bus = pci_register_bus(&d->busdev.qdev, "pci",
 381                               pci_apb_set_irq, pci_pbm_map_irq, d,
 382                               &d->pci_mmio,
 383                               get_system_io(),
 384                               0, 32);
 385
 386     *pbm_irqs = d->pbm_irqs;
 387     d->ivec_irqs = ivec_irqs;
 388
 389     pci_create_simple(d->bus, 0, "pbm-pci");
 390
 391     /* APB secondary busses */
 392     pci_dev = pci_create_multifunction(d->bus, PCI_DEVFN(1, 0), true,
 393                                    "pbm-bridge");
 394     br = DO_UPCAST(PCIBridge, dev, pci_dev);
 395     pci_bridge_map_irq(br, "Advanced PCI Bus secondary bridge 1",
 396                        pci_apb_map_irq);
 397     qdev_init_nofail(&pci_dev->qdev);
 398     *bus2 = pci_bridge_get_sec_bus(br);
 399
 400     pci_dev = pci_create_multifunction(d->bus, PCI_DEVFN(1, 1), true,
 401                                    "pbm-bridge");
 402     br = DO_UPCAST(PCIBridge, dev, pci_dev);
 403     pci_bridge_map_irq(br, "Advanced PCI Bus secondary bridge 2",
 404                        pci_apb_map_irq);
 405     qdev_init_nofail(&pci_dev->qdev);
 406     *bus3 = pci_bridge_get_sec_bus(br);
 407
 408     return d->bus;
 409 }
 410
 411 static void pci_pbm_reset(DeviceState *d)
 412 {
 413     unsigned int i;
 414     APBState *s = container_of(d, APBState, busdev.qdev);
 415
 416     for (i = 0; i < 8; i++) {
 417         s->pci_irq_map[i] &= PBM_PCI_IMR_MASK;
 418     }
 419     for (i = 0; i < 32; i++) {
 420         s->obio_irq_map[i] &= PBM_PCI_IMR_MASK;
 421     }
 422
 423     if (s->nr_resets++ == 0) {
 424         /* Power on reset */
 425         s->reset_control = POR;
 426     }
 427 }
 428
 429 static const MemoryRegionOps pci_config_ops = {
 430     .read = apb_pci_config_read,
 431     .write = apb_pci_config_write,
 432     .endianness = DEVICE_NATIVE_ENDIAN,
 433 };
 434
 435 static int pci_pbm_init_device(SysBusDevice *dev)
 436 {
 437     APBState *s;
 438     unsigned int i;
 439
 440     s = FROM_SYSBUS(APBState, dev);
 441     for (i = 0; i < 8; i++) {
 442         s->pci_irq_map[i] = (0x1f << 6) | (i << 2);
 443     }
 444     for (i = 0; i < 32; i++) {
 445         s->obio_irq_map[i] = ((0x1f << 6) | 0x20) + i;
 446     }
 447     s->pbm_irqs = qemu_allocate_irqs(pci_apb_set_irq, s, MAX_IVEC);
 448
 449     /* apb_config */
 450     memory_region_init_io(&s->apb_config, &apb_config_ops, s, "apb-config",
 451                           0x10000);
 452     /* at region 0 */
 453     sysbus_init_mmio(dev, &s->apb_config);
 454
 455     memory_region_init_io(&s->pci_config, &pci_config_ops, s, "apb-pci-config",
 456                           0x1000000);
 457     /* at region 1 */
 458     sysbus_init_mmio(dev, &s->pci_config);
 459
 460     /* pci_ioport */
 461     memory_region_init_io(&s->pci_ioport, &pci_ioport_ops, s,
 462                           "apb-pci-ioport", 0x10000);
 463     /* at region 2 */
 464     sysbus_init_mmio(dev, &s->pci_ioport);
 465
 466     return 0;
 467 }
 468
 469 static int pbm_pci_host_init(PCIDevice *d)
 470 {
 471     pci_set_word(d->config + PCI_COMMAND,
 472                  PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
 473     pci_set_word(d->config + PCI_STATUS,
 474                  PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ |
 475                  PCI_STATUS_DEVSEL_MEDIUM);
 476     return 0;
 477 }
 478
 479 static void pbm_pci_host_class_init(ObjectClass *klass, void *data)
 480 {
 481     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 482
 483     k->init = pbm_pci_host_init;
 484     k->vendor_id = PCI_VENDOR_ID_SUN;
 485     k->device_id = PCI_DEVICE_ID_SUN_SABRE;
 486     k->class_id = PCI_CLASS_BRIDGE_HOST;
 487 }
 488
 489 static TypeInfo pbm_pci_host_info = {
 490     .name          = "pbm-pci",
 491     .parent        = TYPE_PCI_DEVICE,
 492     .instance_size = sizeof(PCIDevice),
 493     .class_init    = pbm_pci_host_class_init,
 494 };
 495
 496 static void pbm_host_class_init(ObjectClass *klass, void *data)
 497 {
 498     DeviceClass *dc = DEVICE_CLASS(klass);
 499     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 500
 501     k->init = pci_pbm_init_device;
 502     dc->reset = pci_pbm_reset;
 503 }
 504
 505 static TypeInfo pbm_host_info = {
 506     .name          = "pbm",
 507     .parent        = TYPE_SYS_BUS_DEVICE,
 508     .instance_size = sizeof(APBState),
 509     .class_init    = pbm_host_class_init,
 510 };
 511
 512 static void pbm_pci_bridge_class_init(ObjectClass *klass, void *data)
 513 {
 514     DeviceClass *dc = DEVICE_CLASS(klass);
 515     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 516
 517     k->init = apb_pci_bridge_initfn;
 518     k->exit = pci_bridge_exitfn;
 519     k->vendor_id = PCI_VENDOR_ID_SUN;
 520     k->device_id = PCI_DEVICE_ID_SUN_SIMBA;
 521     k->revision = 0x11;
 522     k->config_write = pci_bridge_write_config;
 523     k->is_bridge = 1;
 524     dc->reset = pci_bridge_reset;
 525     dc->vmsd = &vmstate_pci_device;
 526 }
 527
 528 static TypeInfo pbm_pci_bridge_info = {
 529     .name          = "pbm-bridge",
 530     .parent        = TYPE_PCI_DEVICE,
 531     .instance_size = sizeof(PCIBridge),
 532     .class_init    = pbm_pci_bridge_class_init,
 533 };
 534
 535 static void pbm_register_types(void)
 536 {
 537     type_register_static(&pbm_host_info);
 538     type_register_static(&pbm_pci_host_info);
 539     type_register_static(&pbm_pci_bridge_info);
 540 }
 541
 542 type_init(pbm_register_types)