libcacard: remove unnecessary EOL from debug prints
[qemu/ar7.git] / hw / arm / pxa2xx_gpio.c
blob07274285abd8c5283195972a796839101b5ab0c7
1 /*
2 * Intel XScale PXA255/270 GPIO controller emulation.
4 * Copyright (c) 2006 Openedhand Ltd.
5 * Written by Andrzej Zaborowski <balrog@zabor.org>
7 * This code is licensed under the GPL.
8 */
10 #include "hw/hw.h"
11 #include "hw/sysbus.h"
12 #include "hw/arm/pxa.h"
14 #define PXA2XX_GPIO_BANKS 4
16 #define TYPE_PXA2XX_GPIO "pxa2xx-gpio"
17 #define PXA2XX_GPIO(obj) \
18 OBJECT_CHECK(PXA2xxGPIOInfo, (obj), TYPE_PXA2XX_GPIO)
20 typedef struct PXA2xxGPIOInfo PXA2xxGPIOInfo;
21 struct PXA2xxGPIOInfo {
22 /*< private >*/
23 SysBusDevice parent_obj;
24 /*< public >*/
26 MemoryRegion iomem;
27 qemu_irq irq0, irq1, irqX;
28 int lines;
29 int ncpu;
30 ARMCPU *cpu;
32 /* XXX: GNU C vectors are more suitable */
33 uint32_t ilevel[PXA2XX_GPIO_BANKS];
34 uint32_t olevel[PXA2XX_GPIO_BANKS];
35 uint32_t dir[PXA2XX_GPIO_BANKS];
36 uint32_t rising[PXA2XX_GPIO_BANKS];
37 uint32_t falling[PXA2XX_GPIO_BANKS];
38 uint32_t status[PXA2XX_GPIO_BANKS];
39 uint32_t gpsr[PXA2XX_GPIO_BANKS];
40 uint32_t gafr[PXA2XX_GPIO_BANKS * 2];
42 uint32_t prev_level[PXA2XX_GPIO_BANKS];
43 qemu_irq handler[PXA2XX_GPIO_BANKS * 32];
44 qemu_irq read_notify;
47 static struct {
48 enum {
49 GPIO_NONE,
50 GPLR,
51 GPSR,
52 GPCR,
53 GPDR,
54 GRER,
55 GFER,
56 GEDR,
57 GAFR_L,
58 GAFR_U,
59 } reg;
60 int bank;
61 } pxa2xx_gpio_regs[0x200] = {
62 [0 ... 0x1ff] = { GPIO_NONE, 0 },
63 #define PXA2XX_REG(reg, a0, a1, a2, a3) \
64 [a0] = { reg, 0 }, [a1] = { reg, 1 }, [a2] = { reg, 2 }, [a3] = { reg, 3 },
66 PXA2XX_REG(GPLR, 0x000, 0x004, 0x008, 0x100)
67 PXA2XX_REG(GPSR, 0x018, 0x01c, 0x020, 0x118)
68 PXA2XX_REG(GPCR, 0x024, 0x028, 0x02c, 0x124)
69 PXA2XX_REG(GPDR, 0x00c, 0x010, 0x014, 0x10c)
70 PXA2XX_REG(GRER, 0x030, 0x034, 0x038, 0x130)
71 PXA2XX_REG(GFER, 0x03c, 0x040, 0x044, 0x13c)
72 PXA2XX_REG(GEDR, 0x048, 0x04c, 0x050, 0x148)
73 PXA2XX_REG(GAFR_L, 0x054, 0x05c, 0x064, 0x06c)
74 PXA2XX_REG(GAFR_U, 0x058, 0x060, 0x068, 0x070)
77 static void pxa2xx_gpio_irq_update(PXA2xxGPIOInfo *s)
79 if (s->status[0] & (1 << 0))
80 qemu_irq_raise(s->irq0);
81 else
82 qemu_irq_lower(s->irq0);
84 if (s->status[0] & (1 << 1))
85 qemu_irq_raise(s->irq1);
86 else
87 qemu_irq_lower(s->irq1);
89 if ((s->status[0] & ~3) | s->status[1] | s->status[2] | s->status[3])
90 qemu_irq_raise(s->irqX);
91 else
92 qemu_irq_lower(s->irqX);
95 /* Bitmap of pins used as standby and sleep wake-up sources. */
96 static const int pxa2xx_gpio_wake[PXA2XX_GPIO_BANKS] = {
97 0x8003fe1b, 0x002001fc, 0xec080000, 0x0012007f,
100 static void pxa2xx_gpio_set(void *opaque, int line, int level)
102 PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
103 CPUState *cpu = CPU(s->cpu);
104 int bank;
105 uint32_t mask;
107 if (line >= s->lines) {
108 printf("%s: No GPIO pin %i\n", __FUNCTION__, line);
109 return;
112 bank = line >> 5;
113 mask = 1U << (line & 31);
115 if (level) {
116 s->status[bank] |= s->rising[bank] & mask &
117 ~s->ilevel[bank] & ~s->dir[bank];
118 s->ilevel[bank] |= mask;
119 } else {
120 s->status[bank] |= s->falling[bank] & mask &
121 s->ilevel[bank] & ~s->dir[bank];
122 s->ilevel[bank] &= ~mask;
125 if (s->status[bank] & mask)
126 pxa2xx_gpio_irq_update(s);
128 /* Wake-up GPIOs */
129 if (cpu->halted && (mask & ~s->dir[bank] & pxa2xx_gpio_wake[bank])) {
130 cpu_interrupt(cpu, CPU_INTERRUPT_EXITTB);
134 static void pxa2xx_gpio_handler_update(PXA2xxGPIOInfo *s) {
135 uint32_t level, diff;
136 int i, bit, line;
137 for (i = 0; i < PXA2XX_GPIO_BANKS; i ++) {
138 level = s->olevel[i] & s->dir[i];
140 for (diff = s->prev_level[i] ^ level; diff; diff ^= 1 << bit) {
141 bit = ffs(diff) - 1;
142 line = bit + 32 * i;
143 qemu_set_irq(s->handler[line], (level >> bit) & 1);
146 s->prev_level[i] = level;
150 static uint64_t pxa2xx_gpio_read(void *opaque, hwaddr offset,
151 unsigned size)
153 PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
154 uint32_t ret;
155 int bank;
156 if (offset >= 0x200)
157 return 0;
159 bank = pxa2xx_gpio_regs[offset].bank;
160 switch (pxa2xx_gpio_regs[offset].reg) {
161 case GPDR: /* GPIO Pin-Direction registers */
162 return s->dir[bank];
164 case GPSR: /* GPIO Pin-Output Set registers */
165 printf("%s: Read from a write-only register " REG_FMT "\n",
166 __FUNCTION__, offset);
167 return s->gpsr[bank]; /* Return last written value. */
169 case GPCR: /* GPIO Pin-Output Clear registers */
170 printf("%s: Read from a write-only register " REG_FMT "\n",
171 __FUNCTION__, offset);
172 return 31337; /* Specified as unpredictable in the docs. */
174 case GRER: /* GPIO Rising-Edge Detect Enable registers */
175 return s->rising[bank];
177 case GFER: /* GPIO Falling-Edge Detect Enable registers */
178 return s->falling[bank];
180 case GAFR_L: /* GPIO Alternate Function registers */
181 return s->gafr[bank * 2];
183 case GAFR_U: /* GPIO Alternate Function registers */
184 return s->gafr[bank * 2 + 1];
186 case GPLR: /* GPIO Pin-Level registers */
187 ret = (s->olevel[bank] & s->dir[bank]) |
188 (s->ilevel[bank] & ~s->dir[bank]);
189 qemu_irq_raise(s->read_notify);
190 return ret;
192 case GEDR: /* GPIO Edge Detect Status registers */
193 return s->status[bank];
195 default:
196 hw_error("%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset);
199 return 0;
202 static void pxa2xx_gpio_write(void *opaque, hwaddr offset,
203 uint64_t value, unsigned size)
205 PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
206 int bank;
207 if (offset >= 0x200)
208 return;
210 bank = pxa2xx_gpio_regs[offset].bank;
211 switch (pxa2xx_gpio_regs[offset].reg) {
212 case GPDR: /* GPIO Pin-Direction registers */
213 s->dir[bank] = value;
214 pxa2xx_gpio_handler_update(s);
215 break;
217 case GPSR: /* GPIO Pin-Output Set registers */
218 s->olevel[bank] |= value;
219 pxa2xx_gpio_handler_update(s);
220 s->gpsr[bank] = value;
221 break;
223 case GPCR: /* GPIO Pin-Output Clear registers */
224 s->olevel[bank] &= ~value;
225 pxa2xx_gpio_handler_update(s);
226 break;
228 case GRER: /* GPIO Rising-Edge Detect Enable registers */
229 s->rising[bank] = value;
230 break;
232 case GFER: /* GPIO Falling-Edge Detect Enable registers */
233 s->falling[bank] = value;
234 break;
236 case GAFR_L: /* GPIO Alternate Function registers */
237 s->gafr[bank * 2] = value;
238 break;
240 case GAFR_U: /* GPIO Alternate Function registers */
241 s->gafr[bank * 2 + 1] = value;
242 break;
244 case GEDR: /* GPIO Edge Detect Status registers */
245 s->status[bank] &= ~value;
246 pxa2xx_gpio_irq_update(s);
247 break;
249 default:
250 hw_error("%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset);
254 static const MemoryRegionOps pxa_gpio_ops = {
255 .read = pxa2xx_gpio_read,
256 .write = pxa2xx_gpio_write,
257 .endianness = DEVICE_NATIVE_ENDIAN,
260 DeviceState *pxa2xx_gpio_init(hwaddr base,
261 ARMCPU *cpu, DeviceState *pic, int lines)
263 CPUState *cs = CPU(cpu);
264 DeviceState *dev;
266 dev = qdev_create(NULL, TYPE_PXA2XX_GPIO);
267 qdev_prop_set_int32(dev, "lines", lines);
268 qdev_prop_set_int32(dev, "ncpu", cs->cpu_index);
269 qdev_init_nofail(dev);
271 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
272 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
273 qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_0));
274 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1,
275 qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_1));
276 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2,
277 qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_X));
279 return dev;
282 static int pxa2xx_gpio_initfn(SysBusDevice *sbd)
284 DeviceState *dev = DEVICE(sbd);
285 PXA2xxGPIOInfo *s = PXA2XX_GPIO(dev);
287 s->cpu = ARM_CPU(qemu_get_cpu(s->ncpu));
289 qdev_init_gpio_in(dev, pxa2xx_gpio_set, s->lines);
290 qdev_init_gpio_out(dev, s->handler, s->lines);
292 memory_region_init_io(&s->iomem, OBJECT(s), &pxa_gpio_ops, s, "pxa2xx-gpio", 0x1000);
293 sysbus_init_mmio(sbd, &s->iomem);
294 sysbus_init_irq(sbd, &s->irq0);
295 sysbus_init_irq(sbd, &s->irq1);
296 sysbus_init_irq(sbd, &s->irqX);
298 return 0;
302 * Registers a callback to notify on GPLR reads. This normally
303 * shouldn't be needed but it is used for the hack on Spitz machines.
305 void pxa2xx_gpio_read_notifier(DeviceState *dev, qemu_irq handler)
307 PXA2xxGPIOInfo *s = PXA2XX_GPIO(dev);
309 s->read_notify = handler;
312 static const VMStateDescription vmstate_pxa2xx_gpio_regs = {
313 .name = "pxa2xx-gpio",
314 .version_id = 1,
315 .minimum_version_id = 1,
316 .minimum_version_id_old = 1,
317 .fields = (VMStateField []) {
318 VMSTATE_INT32(lines, PXA2xxGPIOInfo),
319 VMSTATE_UINT32_ARRAY(ilevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
320 VMSTATE_UINT32_ARRAY(olevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
321 VMSTATE_UINT32_ARRAY(dir, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
322 VMSTATE_UINT32_ARRAY(rising, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
323 VMSTATE_UINT32_ARRAY(falling, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
324 VMSTATE_UINT32_ARRAY(status, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
325 VMSTATE_UINT32_ARRAY(gafr, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS * 2),
326 VMSTATE_END_OF_LIST(),
330 static Property pxa2xx_gpio_properties[] = {
331 DEFINE_PROP_INT32("lines", PXA2xxGPIOInfo, lines, 0),
332 DEFINE_PROP_INT32("ncpu", PXA2xxGPIOInfo, ncpu, 0),
333 DEFINE_PROP_END_OF_LIST(),
336 static void pxa2xx_gpio_class_init(ObjectClass *klass, void *data)
338 DeviceClass *dc = DEVICE_CLASS(klass);
339 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
341 k->init = pxa2xx_gpio_initfn;
342 dc->desc = "PXA2xx GPIO controller";
343 dc->props = pxa2xx_gpio_properties;
346 static const TypeInfo pxa2xx_gpio_info = {
347 .name = TYPE_PXA2XX_GPIO,
348 .parent = TYPE_SYS_BUS_DEVICE,
349 .instance_size = sizeof(PXA2xxGPIOInfo),
350 .class_init = pxa2xx_gpio_class_init,
353 static void pxa2xx_gpio_register_types(void)
355 type_register_static(&pxa2xx_gpio_info);
358 type_init(pxa2xx_gpio_register_types)