6 #include "exec/exec-all.h"
7 #include "exec/cpu_ldst.h"
11 #endif /* DEBUG_REMAP */
13 #include "exec/user/abitypes.h"
15 #include "exec/user/thunk.h"
16 #include "syscall_defs.h"
17 #include "target_syscall.h"
18 #include "exec/gdbstub.h"
19 #include "qemu/queue.h"
21 #define THREAD __thread
23 /* This struct is used to hold certain information about the image.
24 * Basically, it replicates in user space what would be certain
25 * task_struct fields in the kernel
37 abi_ulong start_stack
;
38 abi_ulong stack_limit
;
40 abi_ulong code_offset
;
41 abi_ulong data_offset
;
48 #ifdef CONFIG_USE_FDPIC
49 abi_ulong loadmap_addr
;
52 abi_ulong pt_dynamic_addr
;
53 struct image_info
*other_info
;
58 /* Information about the current linux thread */
59 struct vm86_saved_state
{
60 uint32_t eax
; /* return code */
70 uint16_t cs
, ss
, ds
, es
, fs
, gs
;
74 #if defined(TARGET_ARM) && defined(TARGET_ABI32)
76 #include "nwfpe/fpa11.h"
79 #define MAX_SIGQUEUE_SIZE 1024
82 struct sigqueue
*next
;
83 target_siginfo_t info
;
86 struct emulated_sigtable
{
87 int pending
; /* true if signal is pending */
88 struct sigqueue
*first
;
89 struct sigqueue info
; /* in order to always have memory for the
90 first signal, we put it here */
93 /* NOTE: we force a big alignment so that the stack stored after is
95 typedef struct TaskState
{
96 pid_t ts_tid
; /* tid (or pid) of this task */
104 #ifdef TARGET_UNICORE32
107 #if defined(TARGET_I386) && !defined(TARGET_X86_64)
108 abi_ulong target_v86
;
109 struct vm86_saved_state vm86_saved_regs
;
110 struct target_vm86plus_struct vm86plus
;
114 abi_ulong child_tidptr
;
119 #if defined(TARGET_ARM) || defined(TARGET_M68K) || defined(TARGET_UNICORE32)
120 /* Extra fields for semihosted binaries. */
125 int used
; /* non zero if used */
126 bool sigsegv_blocked
; /* SIGSEGV blocked by guest */
127 struct image_info
*info
;
128 struct linux_binprm
*bprm
;
130 struct emulated_sigtable sigtab
[TARGET_NSIG
];
131 struct sigqueue sigqueue_table
[MAX_SIGQUEUE_SIZE
]; /* siginfo queue */
132 struct sigqueue
*first_free
; /* first free siginfo queue entry */
133 int signal_pending
; /* non zero if a signal may be pending */
134 } __attribute__((aligned(16))) TaskState
;
136 extern char *exec_path
;
137 void init_task_state(TaskState
*ts
);
138 void task_settid(TaskState
*);
139 void stop_all_tasks(void);
140 extern const char *qemu_uname_release
;
141 extern unsigned long mmap_min_addr
;
143 /* ??? See if we can avoid exposing so much of the loader internals. */
145 /* Read a good amount of data initially, to hopefully get all the
146 program headers loaded. */
147 #define BPRM_BUF_SIZE 1024
150 * This structure is used to hold the arguments that are
151 * used when loading binaries.
153 struct linux_binprm
{
154 char buf
[BPRM_BUF_SIZE
] __attribute__((aligned
));
161 char * filename
; /* Name of binary */
162 int (*core_dump
)(int, const CPUArchState
*); /* coredump routine */
165 void do_init_thread(struct target_pt_regs
*regs
, struct image_info
*infop
);
166 abi_ulong
loader_build_argptr(int envc
, int argc
, abi_ulong sp
,
167 abi_ulong stringp
, int push_ptr
);
168 int loader_exec(int fdexec
, const char *filename
, char **argv
, char **envp
,
169 struct target_pt_regs
* regs
, struct image_info
*infop
,
170 struct linux_binprm
*);
172 int load_elf_binary(struct linux_binprm
*bprm
, struct image_info
*info
);
173 int load_flt_binary(struct linux_binprm
*bprm
, struct image_info
*info
);
175 abi_long
memcpy_to_target(abi_ulong dest
, const void *src
,
177 void target_set_brk(abi_ulong new_brk
);
178 abi_long
do_brk(abi_ulong new_brk
);
179 void syscall_init(void);
180 abi_long
do_syscall(void *cpu_env
, int num
, abi_long arg1
,
181 abi_long arg2
, abi_long arg3
, abi_long arg4
,
182 abi_long arg5
, abi_long arg6
, abi_long arg7
,
184 void gemu_log(const char *fmt
, ...) GCC_FMT_ATTR(1, 2);
185 extern THREAD CPUState
*thread_cpu
;
186 void cpu_loop(CPUArchState
*env
);
187 char *target_strerror(int err
);
188 int get_osversion(void);
189 void init_qemu_uname_release(void);
190 void fork_start(void);
191 void fork_end(int child
);
193 /* Creates the initial guest address space in the host memory space using
194 * the given host start address hint and size. The guest_start parameter
195 * specifies the start address of the guest space. guest_base will be the
196 * difference between the host start address computed by this function and
197 * guest_start. If fixed is specified, then the mapped address space must
198 * start at host_start. The real start address of the mapped memory space is
199 * returned or -1 if there was an error.
201 unsigned long init_guest_space(unsigned long host_start
,
202 unsigned long host_size
,
203 unsigned long guest_start
,
206 #include "qemu/log.h"
209 int host_to_target_waitstatus(int status
);
212 void print_syscall(int num
,
213 abi_long arg1
, abi_long arg2
, abi_long arg3
,
214 abi_long arg4
, abi_long arg5
, abi_long arg6
);
215 void print_syscall_ret(int num
, abi_long arg1
);
216 extern int do_strace
;
219 void process_pending_signals(CPUArchState
*cpu_env
);
220 void signal_init(void);
221 int queue_signal(CPUArchState
*env
, int sig
, target_siginfo_t
*info
);
222 void host_to_target_siginfo(target_siginfo_t
*tinfo
, const siginfo_t
*info
);
223 void target_to_host_siginfo(siginfo_t
*info
, const target_siginfo_t
*tinfo
);
224 int target_to_host_signal(int sig
);
225 int host_to_target_signal(int sig
);
226 long do_sigreturn(CPUArchState
*env
);
227 long do_rt_sigreturn(CPUArchState
*env
);
228 abi_long
do_sigaltstack(abi_ulong uss_addr
, abi_ulong uoss_addr
, abi_ulong sp
);
229 int do_sigprocmask(int how
, const sigset_t
*set
, sigset_t
*oldset
);
233 void save_v86_state(CPUX86State
*env
);
234 void handle_vm86_trap(CPUX86State
*env
, int trapno
);
235 void handle_vm86_fault(CPUX86State
*env
);
236 int do_vm86(CPUX86State
*env
, long subfunction
, abi_ulong v86_addr
);
237 #elif defined(TARGET_SPARC64)
238 void sparc64_set_context(CPUSPARCState
*env
);
239 void sparc64_get_context(CPUSPARCState
*env
);
243 int target_mprotect(abi_ulong start
, abi_ulong len
, int prot
);
244 abi_long
target_mmap(abi_ulong start
, abi_ulong len
, int prot
,
245 int flags
, int fd
, abi_ulong offset
);
246 int target_munmap(abi_ulong start
, abi_ulong len
);
247 abi_long
target_mremap(abi_ulong old_addr
, abi_ulong old_size
,
248 abi_ulong new_size
, unsigned long flags
,
250 int target_msync(abi_ulong start
, abi_ulong len
, int flags
);
251 extern unsigned long last_brk
;
252 extern abi_ulong mmap_next_start
;
253 abi_ulong
mmap_find_vma(abi_ulong
, abi_ulong
);
254 void cpu_list_lock(void);
255 void cpu_list_unlock(void);
256 void mmap_fork_start(void);
257 void mmap_fork_end(int child
);
260 extern unsigned long guest_stack_size
;
264 #define VERIFY_READ 0
265 #define VERIFY_WRITE 1 /* implies read access */
267 static inline int access_ok(int type
, abi_ulong addr
, abi_ulong size
)
269 return page_check_range((target_ulong
)addr
, size
,
270 (type
== VERIFY_READ
) ? PAGE_READ
: (PAGE_READ
| PAGE_WRITE
)) == 0;
273 /* NOTE __get_user and __put_user use host pointers and don't check access.
274 These are usually used to access struct data members once the struct has
275 been locked - usually with lock_user_struct. */
278 - Use __builtin_choose_expr to avoid type promotion from ?:,
279 - Invalid sizes result in a compile time error stemming from
280 the fact that abort has no parameters.
281 - It's easier to use the endian-specific unaligned load/store
282 functions than host-endian unaligned load/store plus tswapN. */
284 #define __put_user_e(x, hptr, e) \
285 (__builtin_choose_expr(sizeof(*(hptr)) == 1, stb_p, \
286 __builtin_choose_expr(sizeof(*(hptr)) == 2, stw_##e##_p, \
287 __builtin_choose_expr(sizeof(*(hptr)) == 4, stl_##e##_p, \
288 __builtin_choose_expr(sizeof(*(hptr)) == 8, stq_##e##_p, abort)))) \
289 ((hptr), (x)), (void)0)
291 #define __get_user_e(x, hptr, e) \
292 ((x) = (typeof(*hptr))( \
293 __builtin_choose_expr(sizeof(*(hptr)) == 1, ldub_p, \
294 __builtin_choose_expr(sizeof(*(hptr)) == 2, lduw_##e##_p, \
295 __builtin_choose_expr(sizeof(*(hptr)) == 4, ldl_##e##_p, \
296 __builtin_choose_expr(sizeof(*(hptr)) == 8, ldq_##e##_p, abort)))) \
299 #ifdef TARGET_WORDS_BIGENDIAN
300 # define __put_user(x, hptr) __put_user_e(x, hptr, be)
301 # define __get_user(x, hptr) __get_user_e(x, hptr, be)
303 # define __put_user(x, hptr) __put_user_e(x, hptr, le)
304 # define __get_user(x, hptr) __get_user_e(x, hptr, le)
307 /* put_user()/get_user() take a guest address and check access */
308 /* These are usually used to access an atomic data type, such as an int,
309 * that has been passed by address. These internally perform locking
310 * and unlocking on the data type.
312 #define put_user(x, gaddr, target_type) \
314 abi_ulong __gaddr = (gaddr); \
315 target_type *__hptr; \
316 abi_long __ret = 0; \
317 if ((__hptr = lock_user(VERIFY_WRITE, __gaddr, sizeof(target_type), 0))) { \
318 __put_user((x), __hptr); \
319 unlock_user(__hptr, __gaddr, sizeof(target_type)); \
321 __ret = -TARGET_EFAULT; \
325 #define get_user(x, gaddr, target_type) \
327 abi_ulong __gaddr = (gaddr); \
328 target_type *__hptr; \
329 abi_long __ret = 0; \
330 if ((__hptr = lock_user(VERIFY_READ, __gaddr, sizeof(target_type), 1))) { \
331 __get_user((x), __hptr); \
332 unlock_user(__hptr, __gaddr, 0); \
334 /* avoid warning */ \
336 __ret = -TARGET_EFAULT; \
341 #define put_user_ual(x, gaddr) put_user((x), (gaddr), abi_ulong)
342 #define put_user_sal(x, gaddr) put_user((x), (gaddr), abi_long)
343 #define put_user_u64(x, gaddr) put_user((x), (gaddr), uint64_t)
344 #define put_user_s64(x, gaddr) put_user((x), (gaddr), int64_t)
345 #define put_user_u32(x, gaddr) put_user((x), (gaddr), uint32_t)
346 #define put_user_s32(x, gaddr) put_user((x), (gaddr), int32_t)
347 #define put_user_u16(x, gaddr) put_user((x), (gaddr), uint16_t)
348 #define put_user_s16(x, gaddr) put_user((x), (gaddr), int16_t)
349 #define put_user_u8(x, gaddr) put_user((x), (gaddr), uint8_t)
350 #define put_user_s8(x, gaddr) put_user((x), (gaddr), int8_t)
352 #define get_user_ual(x, gaddr) get_user((x), (gaddr), abi_ulong)
353 #define get_user_sal(x, gaddr) get_user((x), (gaddr), abi_long)
354 #define get_user_u64(x, gaddr) get_user((x), (gaddr), uint64_t)
355 #define get_user_s64(x, gaddr) get_user((x), (gaddr), int64_t)
356 #define get_user_u32(x, gaddr) get_user((x), (gaddr), uint32_t)
357 #define get_user_s32(x, gaddr) get_user((x), (gaddr), int32_t)
358 #define get_user_u16(x, gaddr) get_user((x), (gaddr), uint16_t)
359 #define get_user_s16(x, gaddr) get_user((x), (gaddr), int16_t)
360 #define get_user_u8(x, gaddr) get_user((x), (gaddr), uint8_t)
361 #define get_user_s8(x, gaddr) get_user((x), (gaddr), int8_t)
363 /* copy_from_user() and copy_to_user() are usually used to copy data
364 * buffers between the target and host. These internally perform
365 * locking/unlocking of the memory.
367 abi_long
copy_from_user(void *hptr
, abi_ulong gaddr
, size_t len
);
368 abi_long
copy_to_user(abi_ulong gaddr
, void *hptr
, size_t len
);
370 /* Functions for accessing guest memory. The tget and tput functions
371 read/write single values, byteswapping as necessary. The lock_user function
372 gets a pointer to a contiguous area of guest memory, but does not perform
373 any byteswapping. lock_user may return either a pointer to the guest
374 memory, or a temporary buffer. */
376 /* Lock an area of guest memory into the host. If copy is true then the
377 host area will have the same contents as the guest. */
378 static inline void *lock_user(int type
, abi_ulong guest_addr
, long len
, int copy
)
380 if (!access_ok(type
, guest_addr
, len
))
387 memcpy(addr
, g2h(guest_addr
), len
);
389 memset(addr
, 0, len
);
393 return g2h(guest_addr
);
397 /* Unlock an area of guest memory. The first LEN bytes must be
398 flushed back to guest memory. host_ptr = NULL is explicitly
399 allowed and does nothing. */
400 static inline void unlock_user(void *host_ptr
, abi_ulong guest_addr
,
407 if (host_ptr
== g2h(guest_addr
))
410 memcpy(g2h(guest_addr
), host_ptr
, len
);
415 /* Return the length of a string in target memory or -TARGET_EFAULT if
417 abi_long
target_strlen(abi_ulong gaddr
);
419 /* Like lock_user but for null terminated strings. */
420 static inline void *lock_user_string(abi_ulong guest_addr
)
423 len
= target_strlen(guest_addr
);
426 return lock_user(VERIFY_READ
, guest_addr
, (long)(len
+ 1), 1);
429 /* Helper macros for locking/unlocking a target struct. */
430 #define lock_user_struct(type, host_ptr, guest_addr, copy) \
431 (host_ptr = lock_user(type, guest_addr, sizeof(*host_ptr), copy))
432 #define unlock_user_struct(host_ptr, guest_addr, copy) \
433 unlock_user(host_ptr, guest_addr, (copy) ? sizeof(*host_ptr) : 0)
437 /* Include target-specific struct and function definitions;
438 * they may need access to the target-independent structures
439 * above, so include them last.
441 #include "target_cpu.h"
442 #include "target_signal.h"
443 #include "target_structs.h"