./configure: export xfs config via --{enable, disable}-xfsctl
[qemu/ar7.git] / hw / mainstone.c
blob27f59009f62de1fe8203b5f6c251e706fd03cf97
1 /*
2 * PXA270-based Intel Mainstone platforms.
4 * Copyright (c) 2007 by Armin Kuster <akuster@kama-aina.net> or
5 * <akuster@mvista.com>
7 * Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
9 * This code is licensed under the GNU GPL v2.
11 * Contributions after 2012-01-13 are licensed under the terms of the
12 * GNU GPL, version 2 or (at your option) any later version.
14 #include "hw.h"
15 #include "pxa.h"
16 #include "arm-misc.h"
17 #include "net.h"
18 #include "devices.h"
19 #include "boards.h"
20 #include "flash.h"
21 #include "blockdev.h"
22 #include "sysbus.h"
23 #include "exec-memory.h"
25 /* Device addresses */
26 #define MST_FPGA_PHYS 0x08000000
27 #define MST_ETH_PHYS 0x10000300
28 #define MST_FLASH_0 0x00000000
29 #define MST_FLASH_1 0x04000000
31 /* IRQ definitions */
32 #define MMC_IRQ 0
33 #define USIM_IRQ 1
34 #define USBC_IRQ 2
35 #define ETHERNET_IRQ 3
36 #define AC97_IRQ 4
37 #define PEN_IRQ 5
38 #define MSINS_IRQ 6
39 #define EXBRD_IRQ 7
40 #define S0_CD_IRQ 9
41 #define S0_STSCHG_IRQ 10
42 #define S0_IRQ 11
43 #define S1_CD_IRQ 13
44 #define S1_STSCHG_IRQ 14
45 #define S1_IRQ 15
47 static struct keymap map[0xE0] = {
48 [0 ... 0xDF] = { -1, -1 },
49 [0x1e] = {0,0}, /* a */
50 [0x30] = {0,1}, /* b */
51 [0x2e] = {0,2}, /* c */
52 [0x20] = {0,3}, /* d */
53 [0x12] = {0,4}, /* e */
54 [0x21] = {0,5}, /* f */
55 [0x22] = {1,0}, /* g */
56 [0x23] = {1,1}, /* h */
57 [0x17] = {1,2}, /* i */
58 [0x24] = {1,3}, /* j */
59 [0x25] = {1,4}, /* k */
60 [0x26] = {1,5}, /* l */
61 [0x32] = {2,0}, /* m */
62 [0x31] = {2,1}, /* n */
63 [0x18] = {2,2}, /* o */
64 [0x19] = {2,3}, /* p */
65 [0x10] = {2,4}, /* q */
66 [0x13] = {2,5}, /* r */
67 [0x1f] = {3,0}, /* s */
68 [0x14] = {3,1}, /* t */
69 [0x16] = {3,2}, /* u */
70 [0x2f] = {3,3}, /* v */
71 [0x11] = {3,4}, /* w */
72 [0x2d] = {3,5}, /* x */
73 [0x15] = {4,2}, /* y */
74 [0x2c] = {4,3}, /* z */
75 [0xc7] = {5,0}, /* Home */
76 [0x2a] = {5,1}, /* shift */
77 [0x39] = {5,2}, /* space */
78 [0x39] = {5,3}, /* space */
79 [0x1c] = {5,5}, /* enter */
80 [0xc8] = {6,0}, /* up */
81 [0xd0] = {6,1}, /* down */
82 [0xcb] = {6,2}, /* left */
83 [0xcd] = {6,3}, /* right */
86 enum mainstone_model_e { mainstone };
88 #define MAINSTONE_RAM 0x04000000
89 #define MAINSTONE_ROM 0x00800000
90 #define MAINSTONE_FLASH 0x02000000
92 static struct arm_boot_info mainstone_binfo = {
93 .loader_start = PXA2XX_SDRAM_BASE,
94 .ram_size = 0x04000000,
97 static void mainstone_common_init(MemoryRegion *address_space_mem,
98 ram_addr_t ram_size,
99 const char *kernel_filename,
100 const char *kernel_cmdline, const char *initrd_filename,
101 const char *cpu_model, enum mainstone_model_e model, int arm_id)
103 uint32_t sector_len = 256 * 1024;
104 target_phys_addr_t mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 };
105 PXA2xxState *cpu;
106 DeviceState *mst_irq;
107 DriveInfo *dinfo;
108 int i;
109 int be;
110 MemoryRegion *rom = g_new(MemoryRegion, 1);
112 if (!cpu_model)
113 cpu_model = "pxa270-c5";
115 /* Setup CPU & memory */
116 cpu = pxa270_init(address_space_mem, mainstone_binfo.ram_size, cpu_model);
117 memory_region_init_ram(rom, "mainstone.rom", MAINSTONE_ROM);
118 vmstate_register_ram_global(rom);
119 memory_region_set_readonly(rom, true);
120 memory_region_add_subregion(address_space_mem, 0, rom);
122 #ifdef TARGET_WORDS_BIGENDIAN
123 be = 1;
124 #else
125 be = 0;
126 #endif
127 /* There are two 32MiB flash devices on the board */
128 for (i = 0; i < 2; i ++) {
129 dinfo = drive_get(IF_PFLASH, 0, i);
130 if (!dinfo) {
131 fprintf(stderr, "Two flash images must be given with the "
132 "'pflash' parameter\n");
133 exit(1);
136 if (!pflash_cfi01_register(mainstone_flash_base[i], NULL,
137 i ? "mainstone.flash1" : "mainstone.flash0",
138 MAINSTONE_FLASH,
139 dinfo->bdrv, sector_len,
140 MAINSTONE_FLASH / sector_len, 4, 0, 0, 0, 0,
141 be)) {
142 fprintf(stderr, "qemu: Error registering flash memory.\n");
143 exit(1);
147 mst_irq = sysbus_create_simple("mainstone-fpga", MST_FPGA_PHYS,
148 qdev_get_gpio_in(cpu->gpio, 0));
150 /* setup keypad */
151 printf("map addr %p\n", &map);
152 pxa27x_register_keypad(cpu->kp, map, 0xe0);
154 /* MMC/SD host */
155 pxa2xx_mmci_handlers(cpu->mmc, NULL, qdev_get_gpio_in(mst_irq, MMC_IRQ));
157 pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0],
158 qdev_get_gpio_in(mst_irq, S0_IRQ),
159 qdev_get_gpio_in(mst_irq, S0_CD_IRQ));
160 pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1],
161 qdev_get_gpio_in(mst_irq, S1_IRQ),
162 qdev_get_gpio_in(mst_irq, S1_CD_IRQ));
164 smc91c111_init(&nd_table[0], MST_ETH_PHYS,
165 qdev_get_gpio_in(mst_irq, ETHERNET_IRQ));
167 mainstone_binfo.kernel_filename = kernel_filename;
168 mainstone_binfo.kernel_cmdline = kernel_cmdline;
169 mainstone_binfo.initrd_filename = initrd_filename;
170 mainstone_binfo.board_id = arm_id;
171 arm_load_kernel(cpu->env, &mainstone_binfo);
174 static void mainstone_init(ram_addr_t ram_size,
175 const char *boot_device,
176 const char *kernel_filename, const char *kernel_cmdline,
177 const char *initrd_filename, const char *cpu_model)
179 mainstone_common_init(get_system_memory(), ram_size, kernel_filename,
180 kernel_cmdline, initrd_filename, cpu_model, mainstone, 0x196);
183 static QEMUMachine mainstone2_machine = {
184 .name = "mainstone",
185 .desc = "Mainstone II (PXA27x)",
186 .init = mainstone_init,
189 static void mainstone_machine_init(void)
191 qemu_register_machine(&mainstone2_machine);
194 machine_init(mainstone_machine_init);