migration/colo.c

   1 /*
   2  * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
   3  * (a.k.a. Fault Tolerance or Continuous Replication)
   4  *
   5  * Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
   6  * Copyright (c) 2016 FUJITSU LIMITED
   7  * Copyright (c) 2016 Intel Corporation
   8  *
   9  * This work is licensed under the terms of the GNU GPL, version 2 or
  10  * later.  See the COPYING file in the top-level directory.
  11  */
  12
  13 #include "qemu/osdep.h"
  14 #include "sysemu/sysemu.h"
  15 #include "qapi/error.h"
  16 #include "qapi/qapi-commands-migration.h"
  17 #include "qemu-file-channel.h"
  18 #include "migration.h"
  19 #include "qemu-file.h"
  20 #include "savevm.h"
  21 #include "migration/colo.h"
  22 #include "block.h"
  23 #include "io/channel-buffer.h"
  24 #include "trace.h"
  25 #include "qemu/error-report.h"
  26 #include "qemu/main-loop.h"
  27 #include "qemu/rcu.h"
  28 #include "migration/failover.h"
  29 #include "migration/ram.h"
  30 #ifdef CONFIG_REPLICATION
  31 #include "replication.h"
  32 #endif
  33 #include "net/colo-compare.h"
  34 #include "net/colo.h"
  35 #include "block/block.h"
  36 #include "qapi/qapi-events-migration.h"
  37 #include "qapi/qmp/qerror.h"
  38 #include "sysemu/cpus.h"
  39 #include "sysemu/runstate.h"
  40 #include "net/filter.h"
  41
  42 static bool vmstate_loading;
  43 static Notifier packets_compare_notifier;
  44
  45 /* User need to know colo mode after COLO failover */
  46 static COLOMode last_colo_mode;
  47
  48 #define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
  49
  50 bool migration_in_colo_state(void)
  51 {
  52     MigrationState *s = migrate_get_current();
  53
  54     return (s->state == MIGRATION_STATUS_COLO);
  55 }
  56
  57 bool migration_incoming_in_colo_state(void)
  58 {
  59     MigrationIncomingState *mis = migration_incoming_get_current();
  60
  61     return mis && (mis->state == MIGRATION_STATUS_COLO);
  62 }
  63
  64 static bool colo_runstate_is_stopped(void)
  65 {
  66     return runstate_check(RUN_STATE_COLO) || !runstate_is_running();
  67 }
  68
  69 static void secondary_vm_do_failover(void)
  70 {
  71 /* COLO needs enable block-replication */
  72 #ifdef CONFIG_REPLICATION
  73     int old_state;
  74     MigrationIncomingState *mis = migration_incoming_get_current();
  75     Error *local_err = NULL;
  76
  77     /* Can not do failover during the process of VM's loading VMstate, Or
  78      * it will break the secondary VM.
  79      */
  80     if (vmstate_loading) {
  81         old_state = failover_set_state(FAILOVER_STATUS_ACTIVE,
  82                         FAILOVER_STATUS_RELAUNCH);
  83         if (old_state != FAILOVER_STATUS_ACTIVE) {
  84             error_report("Unknown error while do failover for secondary VM,"
  85                          "old_state: %s", FailoverStatus_str(old_state));
  86         }
  87         return;
  88     }
  89
  90     migrate_set_state(&mis->state, MIGRATION_STATUS_COLO,
  91                       MIGRATION_STATUS_COMPLETED);
  92
  93     replication_stop_all(true, &local_err);
  94     if (local_err) {
  95         error_report_err(local_err);
  96         local_err = NULL;
  97     }
  98
  99     /* Notify all filters of all NIC to do checkpoint */
 100     colo_notify_filters_event(COLO_EVENT_FAILOVER, &local_err);
 101     if (local_err) {
 102         error_report_err(local_err);
 103     }
 104
 105     if (!autostart) {
 106         error_report("\"-S\" qemu option will be ignored in secondary side");
 107         /* recover runstate to normal migration finish state */
 108         autostart = true;
 109     }
 110     /*
 111      * Make sure COLO incoming thread not block in recv or send,
 112      * If mis->from_src_file and mis->to_src_file use the same fd,
 113      * The second shutdown() will return -1, we ignore this value,
 114      * It is harmless.
 115      */
 116     if (mis->from_src_file) {
 117         qemu_file_shutdown(mis->from_src_file);
 118     }
 119     if (mis->to_src_file) {
 120         qemu_file_shutdown(mis->to_src_file);
 121     }
 122
 123     old_state = failover_set_state(FAILOVER_STATUS_ACTIVE,
 124                                    FAILOVER_STATUS_COMPLETED);
 125     if (old_state != FAILOVER_STATUS_ACTIVE) {
 126         error_report("Incorrect state (%s) while doing failover for "
 127                      "secondary VM", FailoverStatus_str(old_state));
 128         return;
 129     }
 130     /* Notify COLO incoming thread that failover work is finished */
 131     qemu_sem_post(&mis->colo_incoming_sem);
 132
 133     /* For Secondary VM, jump to incoming co */
 134     if (mis->migration_incoming_co) {
 135         qemu_coroutine_enter(mis->migration_incoming_co);
 136     }
 137 #else
 138     abort();
 139 #endif
 140 }
 141
 142 static void primary_vm_do_failover(void)
 143 {
 144 #ifdef CONFIG_REPLICATION
 145     MigrationState *s = migrate_get_current();
 146     int old_state;
 147     Error *local_err = NULL;
 148
 149     migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
 150                       MIGRATION_STATUS_COMPLETED);
 151     /*
 152      * kick COLO thread which might wait at
 153      * qemu_sem_wait(&s->colo_checkpoint_sem).
 154      */
 155     colo_checkpoint_notify(migrate_get_current());
 156
 157     /*
 158      * Wake up COLO thread which may blocked in recv() or send(),
 159      * The s->rp_state.from_dst_file and s->to_dst_file may use the
 160      * same fd, but we still shutdown the fd for twice, it is harmless.
 161      */
 162     if (s->to_dst_file) {
 163         qemu_file_shutdown(s->to_dst_file);
 164     }
 165     if (s->rp_state.from_dst_file) {
 166         qemu_file_shutdown(s->rp_state.from_dst_file);
 167     }
 168
 169     old_state = failover_set_state(FAILOVER_STATUS_ACTIVE,
 170                                    FAILOVER_STATUS_COMPLETED);
 171     if (old_state != FAILOVER_STATUS_ACTIVE) {
 172         error_report("Incorrect state (%s) while doing failover for Primary VM",
 173                      FailoverStatus_str(old_state));
 174         return;
 175     }
 176
 177     replication_stop_all(true, &local_err);
 178     if (local_err) {
 179         error_report_err(local_err);
 180         local_err = NULL;
 181     }
 182
 183     /* Notify COLO thread that failover work is finished */
 184     qemu_sem_post(&s->colo_exit_sem);
 185 #else
 186     abort();
 187 #endif
 188 }
 189
 190 COLOMode get_colo_mode(void)
 191 {
 192     if (migration_in_colo_state()) {
 193         return COLO_MODE_PRIMARY;
 194     } else if (migration_incoming_in_colo_state()) {
 195         return COLO_MODE_SECONDARY;
 196     } else {
 197         return COLO_MODE_NONE;
 198     }
 199 }
 200
 201 void colo_do_failover(void)
 202 {
 203     /* Make sure VM stopped while failover happened. */
 204     if (!colo_runstate_is_stopped()) {
 205         vm_stop_force_state(RUN_STATE_COLO);
 206     }
 207
 208     switch (get_colo_mode()) {
 209     case COLO_MODE_PRIMARY:
 210         primary_vm_do_failover();
 211         break;
 212     case COLO_MODE_SECONDARY:
 213         secondary_vm_do_failover();
 214         break;
 215     default:
 216         error_report("colo_do_failover failed because the colo mode"
 217                      " could not be obtained");
 218     }
 219 }
 220
 221 #ifdef CONFIG_REPLICATION
 222 void qmp_xen_set_replication(bool enable, bool primary,
 223                              bool has_failover, bool failover,
 224                              Error **errp)
 225 {
 226     ReplicationMode mode = primary ?
 227                            REPLICATION_MODE_PRIMARY :
 228                            REPLICATION_MODE_SECONDARY;
 229
 230     if (has_failover && enable) {
 231         error_setg(errp, "Parameter 'failover' is only for"
 232                    " stopping replication");
 233         return;
 234     }
 235
 236     if (enable) {
 237         replication_start_all(mode, errp);
 238     } else {
 239         if (!has_failover) {
 240             failover = NULL;
 241         }
 242         replication_stop_all(failover, failover ? NULL : errp);
 243     }
 244 }
 245
 246 ReplicationStatus *qmp_query_xen_replication_status(Error **errp)
 247 {
 248     Error *err = NULL;
 249     ReplicationStatus *s = g_new0(ReplicationStatus, 1);
 250
 251     replication_get_error_all(&err);
 252     if (err) {
 253         s->error = true;
 254         s->has_desc = true;
 255         s->desc = g_strdup(error_get_pretty(err));
 256     } else {
 257         s->error = false;
 258     }
 259
 260     error_free(err);
 261     return s;
 262 }
 263
 264 void qmp_xen_colo_do_checkpoint(Error **errp)
 265 {
 266     Error *err = NULL;
 267
 268     replication_do_checkpoint_all(&err);
 269     if (err) {
 270         error_propagate(errp, err);
 271         return;
 272     }
 273     /* Notify all filters of all NIC to do checkpoint */
 274     colo_notify_filters_event(COLO_EVENT_CHECKPOINT, errp);
 275 }
 276 #endif
 277
 278 COLOStatus *qmp_query_colo_status(Error **errp)
 279 {
 280     COLOStatus *s = g_new0(COLOStatus, 1);
 281
 282     s->mode = get_colo_mode();
 283     s->last_mode = last_colo_mode;
 284
 285     switch (failover_get_state()) {
 286     case FAILOVER_STATUS_NONE:
 287         s->reason = COLO_EXIT_REASON_NONE;
 288         break;
 289     case FAILOVER_STATUS_COMPLETED:
 290         s->reason = COLO_EXIT_REASON_REQUEST;
 291         break;
 292     default:
 293         if (migration_in_colo_state()) {
 294             s->reason = COLO_EXIT_REASON_PROCESSING;
 295         } else {
 296             s->reason = COLO_EXIT_REASON_ERROR;
 297         }
 298     }
 299
 300     return s;
 301 }
 302
 303 static void colo_send_message(QEMUFile *f, COLOMessage msg,
 304                               Error **errp)
 305 {
 306     int ret;
 307
 308     if (msg >= COLO_MESSAGE__MAX) {
 309         error_setg(errp, "%s: Invalid message", __func__);
 310         return;
 311     }
 312     qemu_put_be32(f, msg);
 313     qemu_fflush(f);
 314
 315     ret = qemu_file_get_error(f);
 316     if (ret < 0) {
 317         error_setg_errno(errp, -ret, "Can't send COLO message");
 318     }
 319     trace_colo_send_message(COLOMessage_str(msg));
 320 }
 321
 322 static void colo_send_message_value(QEMUFile *f, COLOMessage msg,
 323                                     uint64_t value, Error **errp)
 324 {
 325     Error *local_err = NULL;
 326     int ret;
 327
 328     colo_send_message(f, msg, &local_err);
 329     if (local_err) {
 330         error_propagate(errp, local_err);
 331         return;
 332     }
 333     qemu_put_be64(f, value);
 334     qemu_fflush(f);
 335
 336     ret = qemu_file_get_error(f);
 337     if (ret < 0) {
 338         error_setg_errno(errp, -ret, "Failed to send value for message:%s",
 339                          COLOMessage_str(msg));
 340     }
 341 }
 342
 343 static COLOMessage colo_receive_message(QEMUFile *f, Error **errp)
 344 {
 345     COLOMessage msg;
 346     int ret;
 347
 348     msg = qemu_get_be32(f);
 349     ret = qemu_file_get_error(f);
 350     if (ret < 0) {
 351         error_setg_errno(errp, -ret, "Can't receive COLO message");
 352         return msg;
 353     }
 354     if (msg >= COLO_MESSAGE__MAX) {
 355         error_setg(errp, "%s: Invalid message", __func__);
 356         return msg;
 357     }
 358     trace_colo_receive_message(COLOMessage_str(msg));
 359     return msg;
 360 }
 361
 362 static void colo_receive_check_message(QEMUFile *f, COLOMessage expect_msg,
 363                                        Error **errp)
 364 {
 365     COLOMessage msg;
 366     Error *local_err = NULL;
 367
 368     msg = colo_receive_message(f, &local_err);
 369     if (local_err) {
 370         error_propagate(errp, local_err);
 371         return;
 372     }
 373     if (msg != expect_msg) {
 374         error_setg(errp, "Unexpected COLO message %d, expected %d",
 375                           msg, expect_msg);
 376     }
 377 }
 378
 379 static uint64_t colo_receive_message_value(QEMUFile *f, uint32_t expect_msg,
 380                                            Error **errp)
 381 {
 382     Error *local_err = NULL;
 383     uint64_t value;
 384     int ret;
 385
 386     colo_receive_check_message(f, expect_msg, &local_err);
 387     if (local_err) {
 388         error_propagate(errp, local_err);
 389         return 0;
 390     }
 391
 392     value = qemu_get_be64(f);
 393     ret = qemu_file_get_error(f);
 394     if (ret < 0) {
 395         error_setg_errno(errp, -ret, "Failed to get value for COLO message: %s",
 396                          COLOMessage_str(expect_msg));
 397     }
 398     return value;
 399 }
 400
 401 static int colo_do_checkpoint_transaction(MigrationState *s,
 402                                           QIOChannelBuffer *bioc,
 403                                           QEMUFile *fb)
 404 {
 405     Error *local_err = NULL;
 406     int ret = -1;
 407
 408     colo_send_message(s->to_dst_file, COLO_MESSAGE_CHECKPOINT_REQUEST,
 409                       &local_err);
 410     if (local_err) {
 411         goto out;
 412     }
 413
 414     colo_receive_check_message(s->rp_state.from_dst_file,
 415                     COLO_MESSAGE_CHECKPOINT_REPLY, &local_err);
 416     if (local_err) {
 417         goto out;
 418     }
 419     /* Reset channel-buffer directly */
 420     qio_channel_io_seek(QIO_CHANNEL(bioc), 0, 0, NULL);
 421     bioc->usage = 0;
 422
 423     qemu_mutex_lock_iothread();
 424     if (failover_get_state() != FAILOVER_STATUS_NONE) {
 425         qemu_mutex_unlock_iothread();
 426         goto out;
 427     }
 428     vm_stop_force_state(RUN_STATE_COLO);
 429     qemu_mutex_unlock_iothread();
 430     trace_colo_vm_state_change("run", "stop");
 431     /*
 432      * Failover request bh could be called after vm_stop_force_state(),
 433      * So we need check failover_request_is_active() again.
 434      */
 435     if (failover_get_state() != FAILOVER_STATUS_NONE) {
 436         goto out;
 437     }
 438
 439     colo_notify_compares_event(NULL, COLO_EVENT_CHECKPOINT, &local_err);
 440     if (local_err) {
 441         goto out;
 442     }
 443
 444     /* Disable block migration */
 445     migrate_set_block_enabled(false, &local_err);
 446     if (local_err) {
 447         goto out;
 448     }
 449     qemu_mutex_lock_iothread();
 450
 451 #ifdef CONFIG_REPLICATION
 452     replication_do_checkpoint_all(&local_err);
 453     if (local_err) {
 454         qemu_mutex_unlock_iothread();
 455         goto out;
 456     }
 457 #else
 458         abort();
 459 #endif
 460
 461     colo_send_message(s->to_dst_file, COLO_MESSAGE_VMSTATE_SEND, &local_err);
 462     if (local_err) {
 463         qemu_mutex_unlock_iothread();
 464         goto out;
 465     }
 466     /* Note: device state is saved into buffer */
 467     ret = qemu_save_device_state(fb);
 468
 469     qemu_mutex_unlock_iothread();
 470     if (ret < 0) {
 471         goto out;
 472     }
 473     /*
 474      * Only save VM's live state, which not including device state.
 475      * TODO: We may need a timeout mechanism to prevent COLO process
 476      * to be blocked here.
 477      */
 478     qemu_savevm_live_state(s->to_dst_file);
 479
 480     qemu_fflush(fb);
 481
 482     /*
 483      * We need the size of the VMstate data in Secondary side,
 484      * With which we can decide how much data should be read.
 485      */
 486     colo_send_message_value(s->to_dst_file, COLO_MESSAGE_VMSTATE_SIZE,
 487                             bioc->usage, &local_err);
 488     if (local_err) {
 489         goto out;
 490     }
 491
 492     qemu_put_buffer(s->to_dst_file, bioc->data, bioc->usage);
 493     qemu_fflush(s->to_dst_file);
 494     ret = qemu_file_get_error(s->to_dst_file);
 495     if (ret < 0) {
 496         goto out;
 497     }
 498
 499     colo_receive_check_message(s->rp_state.from_dst_file,
 500                        COLO_MESSAGE_VMSTATE_RECEIVED, &local_err);
 501     if (local_err) {
 502         goto out;
 503     }
 504
 505     colo_receive_check_message(s->rp_state.from_dst_file,
 506                        COLO_MESSAGE_VMSTATE_LOADED, &local_err);
 507     if (local_err) {
 508         goto out;
 509     }
 510
 511     ret = 0;
 512
 513     qemu_mutex_lock_iothread();
 514     vm_start();
 515     qemu_mutex_unlock_iothread();
 516     trace_colo_vm_state_change("stop", "run");
 517
 518 out:
 519     if (local_err) {
 520         error_report_err(local_err);
 521     }
 522     return ret;
 523 }
 524
 525 static void colo_compare_notify_checkpoint(Notifier *notifier, void *data)
 526 {
 527     colo_checkpoint_notify(data);
 528 }
 529
 530 static void colo_process_checkpoint(MigrationState *s)
 531 {
 532     QIOChannelBuffer *bioc;
 533     QEMUFile *fb = NULL;
 534     int64_t current_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
 535     Error *local_err = NULL;
 536     int ret;
 537
 538     last_colo_mode = get_colo_mode();
 539     if (last_colo_mode != COLO_MODE_PRIMARY) {
 540         error_report("COLO mode must be COLO_MODE_PRIMARY");
 541         return;
 542     }
 543
 544     failover_init_state();
 545
 546     s->rp_state.from_dst_file = qemu_file_get_return_path(s->to_dst_file);
 547     if (!s->rp_state.from_dst_file) {
 548         error_report("Open QEMUFile from_dst_file failed");
 549         goto out;
 550     }
 551
 552     packets_compare_notifier.notify = colo_compare_notify_checkpoint;
 553     colo_compare_register_notifier(&packets_compare_notifier);
 554
 555     /*
 556      * Wait for Secondary finish loading VM states and enter COLO
 557      * restore.
 558      */
 559     colo_receive_check_message(s->rp_state.from_dst_file,
 560                        COLO_MESSAGE_CHECKPOINT_READY, &local_err);
 561     if (local_err) {
 562         goto out;
 563     }
 564     bioc = qio_channel_buffer_new(COLO_BUFFER_BASE_SIZE);
 565     fb = qemu_fopen_channel_output(QIO_CHANNEL(bioc));
 566     object_unref(OBJECT(bioc));
 567
 568     qemu_mutex_lock_iothread();
 569 #ifdef CONFIG_REPLICATION
 570     replication_start_all(REPLICATION_MODE_PRIMARY, &local_err);
 571     if (local_err) {
 572         qemu_mutex_unlock_iothread();
 573         goto out;
 574     }
 575 #else
 576         abort();
 577 #endif
 578
 579     vm_start();
 580     qemu_mutex_unlock_iothread();
 581     trace_colo_vm_state_change("stop", "run");
 582
 583     timer_mod(s->colo_delay_timer,
 584             current_time + s->parameters.x_checkpoint_delay);
 585
 586     while (s->state == MIGRATION_STATUS_COLO) {
 587         if (failover_get_state() != FAILOVER_STATUS_NONE) {
 588             error_report("failover request");
 589             goto out;
 590         }
 591
 592         qemu_sem_wait(&s->colo_checkpoint_sem);
 593
 594         if (s->state != MIGRATION_STATUS_COLO) {
 595             goto out;
 596         }
 597         ret = colo_do_checkpoint_transaction(s, bioc, fb);
 598         if (ret < 0) {
 599             goto out;
 600         }
 601     }
 602
 603 out:
 604     /* Throw the unreported error message after exited from loop */
 605     if (local_err) {
 606         error_report_err(local_err);
 607     }
 608
 609     if (fb) {
 610         qemu_fclose(fb);
 611     }
 612
 613     /*
 614      * There are only two reasons we can get here, some error happened
 615      * or the user triggered failover.
 616      */
 617     switch (failover_get_state()) {
 618     case FAILOVER_STATUS_COMPLETED:
 619         qapi_event_send_colo_exit(COLO_MODE_PRIMARY,
 620                                   COLO_EXIT_REASON_REQUEST);
 621         break;
 622     default:
 623         qapi_event_send_colo_exit(COLO_MODE_PRIMARY,
 624                                   COLO_EXIT_REASON_ERROR);
 625     }
 626
 627     /* Hope this not to be too long to wait here */
 628     qemu_sem_wait(&s->colo_exit_sem);
 629     qemu_sem_destroy(&s->colo_exit_sem);
 630
 631     /*
 632      * It is safe to unregister notifier after failover finished.
 633      * Besides, colo_delay_timer and colo_checkpoint_sem can't be
 634      * released befor unregister notifier, or there will be use-after-free
 635      * error.
 636      */
 637     colo_compare_unregister_notifier(&packets_compare_notifier);
 638     timer_del(s->colo_delay_timer);
 639     timer_free(s->colo_delay_timer);
 640     qemu_sem_destroy(&s->colo_checkpoint_sem);
 641
 642     /*
 643      * Must be called after failover BH is completed,
 644      * Or the failover BH may shutdown the wrong fd that
 645      * re-used by other threads after we release here.
 646      */
 647     if (s->rp_state.from_dst_file) {
 648         qemu_fclose(s->rp_state.from_dst_file);
 649     }
 650 }
 651
 652 void colo_checkpoint_notify(void *opaque)
 653 {
 654     MigrationState *s = opaque;
 655     int64_t next_notify_time;
 656
 657     qemu_sem_post(&s->colo_checkpoint_sem);
 658     s->colo_checkpoint_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
 659     next_notify_time = s->colo_checkpoint_time +
 660                     s->parameters.x_checkpoint_delay;
 661     timer_mod(s->colo_delay_timer, next_notify_time);
 662 }
 663
 664 void migrate_start_colo_process(MigrationState *s)
 665 {
 666     qemu_mutex_unlock_iothread();
 667     qemu_sem_init(&s->colo_checkpoint_sem, 0);
 668     s->colo_delay_timer =  timer_new_ms(QEMU_CLOCK_HOST,
 669                                 colo_checkpoint_notify, s);
 670
 671     qemu_sem_init(&s->colo_exit_sem, 0);
 672     migrate_set_state(&s->state, MIGRATION_STATUS_ACTIVE,
 673                       MIGRATION_STATUS_COLO);
 674     colo_process_checkpoint(s);
 675     qemu_mutex_lock_iothread();
 676 }
 677
 678 static void colo_incoming_process_checkpoint(MigrationIncomingState *mis,
 679                       QEMUFile *fb, QIOChannelBuffer *bioc, Error **errp)
 680 {
 681     uint64_t total_size;
 682     uint64_t value;
 683     Error *local_err = NULL;
 684     int ret;
 685
 686     qemu_mutex_lock_iothread();
 687     vm_stop_force_state(RUN_STATE_COLO);
 688     trace_colo_vm_state_change("run", "stop");
 689     qemu_mutex_unlock_iothread();
 690
 691     /* FIXME: This is unnecessary for periodic checkpoint mode */
 692     colo_send_message(mis->to_src_file, COLO_MESSAGE_CHECKPOINT_REPLY,
 693                  &local_err);
 694     if (local_err) {
 695         error_propagate(errp, local_err);
 696         return;
 697     }
 698
 699     colo_receive_check_message(mis->from_src_file,
 700                        COLO_MESSAGE_VMSTATE_SEND, &local_err);
 701     if (local_err) {
 702         error_propagate(errp, local_err);
 703         return;
 704     }
 705
 706     qemu_mutex_lock_iothread();
 707     cpu_synchronize_all_pre_loadvm();
 708     ret = qemu_loadvm_state_main(mis->from_src_file, mis);
 709     qemu_mutex_unlock_iothread();
 710
 711     if (ret < 0) {
 712         error_setg(errp, "Load VM's live state (ram) error");
 713         return;
 714     }
 715
 716     value = colo_receive_message_value(mis->from_src_file,
 717                              COLO_MESSAGE_VMSTATE_SIZE, &local_err);
 718     if (local_err) {
 719         error_propagate(errp, local_err);
 720         return;
 721     }
 722
 723     /*
 724      * Read VM device state data into channel buffer,
 725      * It's better to re-use the memory allocated.
 726      * Here we need to handle the channel buffer directly.
 727      */
 728     if (value > bioc->capacity) {
 729         bioc->capacity = value;
 730         bioc->data = g_realloc(bioc->data, bioc->capacity);
 731     }
 732     total_size = qemu_get_buffer(mis->from_src_file, bioc->data, value);
 733     if (total_size != value) {
 734         error_setg(errp, "Got %" PRIu64 " VMState data, less than expected"
 735                     " %" PRIu64, total_size, value);
 736         return;
 737     }
 738     bioc->usage = total_size;
 739     qio_channel_io_seek(QIO_CHANNEL(bioc), 0, 0, NULL);
 740
 741     colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_RECEIVED,
 742                  &local_err);
 743     if (local_err) {
 744         error_propagate(errp, local_err);
 745         return;
 746     }
 747
 748     qemu_mutex_lock_iothread();
 749     vmstate_loading = true;
 750     ret = qemu_load_device_state(fb);
 751     if (ret < 0) {
 752         error_setg(errp, "COLO: load device state failed");
 753         qemu_mutex_unlock_iothread();
 754         return;
 755     }
 756
 757 #ifdef CONFIG_REPLICATION
 758     replication_get_error_all(&local_err);
 759     if (local_err) {
 760         error_propagate(errp, local_err);
 761         qemu_mutex_unlock_iothread();
 762         return;
 763     }
 764
 765     /* discard colo disk buffer */
 766     replication_do_checkpoint_all(&local_err);
 767     if (local_err) {
 768         error_propagate(errp, local_err);
 769         qemu_mutex_unlock_iothread();
 770         return;
 771     }
 772 #else
 773     abort();
 774 #endif
 775     /* Notify all filters of all NIC to do checkpoint */
 776     colo_notify_filters_event(COLO_EVENT_CHECKPOINT, &local_err);
 777
 778     if (local_err) {
 779         error_propagate(errp, local_err);
 780         qemu_mutex_unlock_iothread();
 781         return;
 782     }
 783
 784     vmstate_loading = false;
 785     vm_start();
 786     trace_colo_vm_state_change("stop", "run");
 787     qemu_mutex_unlock_iothread();
 788
 789     if (failover_get_state() == FAILOVER_STATUS_RELAUNCH) {
 790         failover_set_state(FAILOVER_STATUS_RELAUNCH,
 791                         FAILOVER_STATUS_NONE);
 792         failover_request_active(NULL);
 793         return;
 794     }
 795
 796     colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_LOADED,
 797                  &local_err);
 798     if (local_err) {
 799         error_propagate(errp, local_err);
 800     }
 801 }
 802
 803 static void colo_wait_handle_message(MigrationIncomingState *mis,
 804                 QEMUFile *fb, QIOChannelBuffer *bioc, Error **errp)
 805 {
 806     COLOMessage msg;
 807     Error *local_err = NULL;
 808
 809     msg = colo_receive_message(mis->from_src_file, &local_err);
 810     if (local_err) {
 811         error_propagate(errp, local_err);
 812         return;
 813     }
 814
 815     switch (msg) {
 816     case COLO_MESSAGE_CHECKPOINT_REQUEST:
 817         colo_incoming_process_checkpoint(mis, fb, bioc, errp);
 818         break;
 819     default:
 820         error_setg(errp, "Got unknown COLO message: %d", msg);
 821         break;
 822     }
 823 }
 824
 825 void *colo_process_incoming_thread(void *opaque)
 826 {
 827     MigrationIncomingState *mis = opaque;
 828     QEMUFile *fb = NULL;
 829     QIOChannelBuffer *bioc = NULL; /* Cache incoming device state */
 830     Error *local_err = NULL;
 831
 832     rcu_register_thread();
 833     qemu_sem_init(&mis->colo_incoming_sem, 0);
 834
 835     migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
 836                       MIGRATION_STATUS_COLO);
 837
 838     last_colo_mode = get_colo_mode();
 839     if (last_colo_mode != COLO_MODE_SECONDARY) {
 840         error_report("COLO mode must be COLO_MODE_SECONDARY");
 841         return NULL;
 842     }
 843
 844     failover_init_state();
 845
 846     mis->to_src_file = qemu_file_get_return_path(mis->from_src_file);
 847     if (!mis->to_src_file) {
 848         error_report("COLO incoming thread: Open QEMUFile to_src_file failed");
 849         goto out;
 850     }
 851     /*
 852      * Note: the communication between Primary side and Secondary side
 853      * should be sequential, we set the fd to unblocked in migration incoming
 854      * coroutine, and here we are in the COLO incoming thread, so it is ok to
 855      * set the fd back to blocked.
 856      */
 857     qemu_file_set_blocking(mis->from_src_file, true);
 858
 859     colo_incoming_start_dirty_log();
 860
 861     bioc = qio_channel_buffer_new(COLO_BUFFER_BASE_SIZE);
 862     fb = qemu_fopen_channel_input(QIO_CHANNEL(bioc));
 863     object_unref(OBJECT(bioc));
 864
 865     qemu_mutex_lock_iothread();
 866 #ifdef CONFIG_REPLICATION
 867     replication_start_all(REPLICATION_MODE_SECONDARY, &local_err);
 868     if (local_err) {
 869         qemu_mutex_unlock_iothread();
 870         goto out;
 871     }
 872 #else
 873         abort();
 874 #endif
 875     vm_start();
 876     trace_colo_vm_state_change("stop", "run");
 877     qemu_mutex_unlock_iothread();
 878
 879     colo_send_message(mis->to_src_file, COLO_MESSAGE_CHECKPOINT_READY,
 880                       &local_err);
 881     if (local_err) {
 882         goto out;
 883     }
 884
 885     while (mis->state == MIGRATION_STATUS_COLO) {
 886         colo_wait_handle_message(mis, fb, bioc, &local_err);
 887         if (local_err) {
 888             error_report_err(local_err);
 889             break;
 890         }
 891         if (failover_get_state() != FAILOVER_STATUS_NONE) {
 892             error_report("failover request");
 893             break;
 894         }
 895     }
 896
 897 out:
 898     vmstate_loading = false;
 899
 900     /*
 901      * There are only two reasons we can get here, some error happened
 902      * or the user triggered failover.
 903      */
 904     switch (failover_get_state()) {
 905     case FAILOVER_STATUS_COMPLETED:
 906         qapi_event_send_colo_exit(COLO_MODE_SECONDARY,
 907                                   COLO_EXIT_REASON_REQUEST);
 908         break;
 909     default:
 910         qapi_event_send_colo_exit(COLO_MODE_SECONDARY,
 911                                   COLO_EXIT_REASON_ERROR);
 912     }
 913
 914     if (fb) {
 915         qemu_fclose(fb);
 916     }
 917
 918     /* Hope this not to be too long to loop here */
 919     qemu_sem_wait(&mis->colo_incoming_sem);
 920     qemu_sem_destroy(&mis->colo_incoming_sem);
 921     /* Must be called after failover BH is completed */
 922     if (mis->to_src_file) {
 923         qemu_fclose(mis->to_src_file);
 924         mis->to_src_file = NULL;
 925     }
 926
 927     rcu_unregister_thread();
 928     return NULL;
 929 }