hw/arm/strongarm.c

   1 /*
   2  * StrongARM SA-1100/SA-1110 emulation
   3  *
   4  * Copyright (C) 2011 Dmitry Eremin-Solenikov
   5  *
   6  * Largely based on StrongARM emulation:
   7  * Copyright (c) 2006 Openedhand Ltd.
   8  * Written by Andrzej Zaborowski <balrog@zabor.org>
   9  *
  10  * UART code based on QEMU 16550A UART emulation
  11  * Copyright (c) 2003-2004 Fabrice Bellard
  12  * Copyright (c) 2008 Citrix Systems, Inc.
  13  *
  14  *  This program is free software; you can redistribute it and/or modify
  15  *  it under the terms of the GNU General Public License version 2 as
  16  *  published by the Free Software Foundation.
  17  *
  18  *  This program is distributed in the hope that it will be useful,
  19  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  *  GNU General Public License for more details.
  22  *
  23  *  You should have received a copy of the GNU General Public License along
  24  *  with this program; if not, see <http://www.gnu.org/licenses/>.
  25  *
  26  *  Contributions after 2012-01-13 are licensed under the terms of the
  27  *  GNU GPL, version 2 or (at your option) any later version.
  28  */
  29
  30 #include "qemu/osdep.h"
  31 #include "qemu-common.h"
  32 #include "cpu.h"
  33 #include "hw/boards.h"
  34 #include "hw/irq.h"
  35 #include "hw/qdev-properties.h"
  36 #include "hw/sysbus.h"
  37 #include "migration/vmstate.h"
  38 #include "strongarm.h"
  39 #include "qemu/error-report.h"
  40 #include "hw/arm/boot.h"
  41 #include "chardev/char-fe.h"
  42 #include "chardev/char-serial.h"
  43 #include "sysemu/sysemu.h"
  44 #include "hw/ssi/ssi.h"
  45 #include "qemu/cutils.h"
  46 #include "qemu/log.h"
  47
  48 //#define DEBUG
  49
  50 /*
  51  TODO
  52  - Implement cp15, c14 ?
  53  - Implement cp15, c15 !!! (idle used in L)
  54  - Implement idle mode handling/DIM
  55  - Implement sleep mode/Wake sources
  56  - Implement reset control
  57  - Implement memory control regs
  58  - PCMCIA handling
  59  - Maybe support MBGNT/MBREQ
  60  - DMA channels
  61  - GPCLK
  62  - IrDA
  63  - MCP
  64  - Enhance UART with modem signals
  65  */
  66
  67 #ifdef DEBUG
  68 # define DPRINTF(format, ...) printf(format , ## __VA_ARGS__)
  69 #else
  70 # define DPRINTF(format, ...) do { } while (0)
  71 #endif
  72
  73 static struct {
  74     hwaddr io_base;
  75     int irq;
  76 } sa_serial[] = {
  77     { 0x80010000, SA_PIC_UART1 },
  78     { 0x80030000, SA_PIC_UART2 },
  79     { 0x80050000, SA_PIC_UART3 },
  80     { 0, 0 }
  81 };
  82
  83 /* Interrupt Controller */
  84
  85 #define TYPE_STRONGARM_PIC "strongarm_pic"
  86 #define STRONGARM_PIC(obj) \
  87     OBJECT_CHECK(StrongARMPICState, (obj), TYPE_STRONGARM_PIC)
  88
  89 typedef struct StrongARMPICState {
  90     SysBusDevice parent_obj;
  91
  92     MemoryRegion iomem;
  93     qemu_irq    irq;
  94     qemu_irq    fiq;
  95
  96     uint32_t pending;
  97     uint32_t enabled;
  98     uint32_t is_fiq;
  99     uint32_t int_idle;
 100 } StrongARMPICState;
 101
 102 #define ICIP    0x00
 103 #define ICMR    0x04
 104 #define ICLR    0x08
 105 #define ICFP    0x10
 106 #define ICPR    0x20
 107 #define ICCR    0x0c
 108
 109 #define SA_PIC_SRCS     32
 110
 111
 112 static void strongarm_pic_update(void *opaque)
 113 {
 114     StrongARMPICState *s = opaque;
 115
 116     /* FIXME: reflect DIM */
 117     qemu_set_irq(s->fiq, s->pending & s->enabled &  s->is_fiq);
 118     qemu_set_irq(s->irq, s->pending & s->enabled & ~s->is_fiq);
 119 }
 120
 121 static void strongarm_pic_set_irq(void *opaque, int irq, int level)
 122 {
 123     StrongARMPICState *s = opaque;
 124
 125     if (level) {
 126         s->pending |= 1 << irq;
 127     } else {
 128         s->pending &= ~(1 << irq);
 129     }
 130
 131     strongarm_pic_update(s);
 132 }
 133
 134 static uint64_t strongarm_pic_mem_read(void *opaque, hwaddr offset,
 135                                        unsigned size)
 136 {
 137     StrongARMPICState *s = opaque;
 138
 139     switch (offset) {
 140     case ICIP:
 141         return s->pending & ~s->is_fiq & s->enabled;
 142     case ICMR:
 143         return s->enabled;
 144     case ICLR:
 145         return s->is_fiq;
 146     case ICCR:
 147         return s->int_idle == 0;
 148     case ICFP:
 149         return s->pending & s->is_fiq & s->enabled;
 150     case ICPR:
 151         return s->pending;
 152     default:
 153         printf("%s: Bad register offset 0x" TARGET_FMT_plx "\n",
 154                         __func__, offset);
 155         return 0;
 156     }
 157 }
 158
 159 static void strongarm_pic_mem_write(void *opaque, hwaddr offset,
 160                                     uint64_t value, unsigned size)
 161 {
 162     StrongARMPICState *s = opaque;
 163
 164     switch (offset) {
 165     case ICMR:
 166         s->enabled = value;
 167         break;
 168     case ICLR:
 169         s->is_fiq = value;
 170         break;
 171     case ICCR:
 172         s->int_idle = (value & 1) ? 0 : ~0;
 173         break;
 174     default:
 175         printf("%s: Bad register offset 0x" TARGET_FMT_plx "\n",
 176                         __func__, offset);
 177         break;
 178     }
 179     strongarm_pic_update(s);
 180 }
 181
 182 static const MemoryRegionOps strongarm_pic_ops = {
 183     .read = strongarm_pic_mem_read,
 184     .write = strongarm_pic_mem_write,
 185     .endianness = DEVICE_NATIVE_ENDIAN,
 186 };
 187
 188 static void strongarm_pic_initfn(Object *obj)
 189 {
 190     DeviceState *dev = DEVICE(obj);
 191     StrongARMPICState *s = STRONGARM_PIC(obj);
 192     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 193
 194     qdev_init_gpio_in(dev, strongarm_pic_set_irq, SA_PIC_SRCS);
 195     memory_region_init_io(&s->iomem, obj, &strongarm_pic_ops, s,
 196                           "pic", 0x1000);
 197     sysbus_init_mmio(sbd, &s->iomem);
 198     sysbus_init_irq(sbd, &s->irq);
 199     sysbus_init_irq(sbd, &s->fiq);
 200 }
 201
 202 static int strongarm_pic_post_load(void *opaque, int version_id)
 203 {
 204     strongarm_pic_update(opaque);
 205     return 0;
 206 }
 207
 208 static VMStateDescription vmstate_strongarm_pic_regs = {
 209     .name = "strongarm_pic",
 210     .version_id = 0,
 211     .minimum_version_id = 0,
 212     .post_load = strongarm_pic_post_load,
 213     .fields = (VMStateField[]) {
 214         VMSTATE_UINT32(pending, StrongARMPICState),
 215         VMSTATE_UINT32(enabled, StrongARMPICState),
 216         VMSTATE_UINT32(is_fiq, StrongARMPICState),
 217         VMSTATE_UINT32(int_idle, StrongARMPICState),
 218         VMSTATE_END_OF_LIST(),
 219     },
 220 };
 221
 222 static void strongarm_pic_class_init(ObjectClass *klass, void *data)
 223 {
 224     DeviceClass *dc = DEVICE_CLASS(klass);
 225
 226     dc->desc = "StrongARM PIC";
 227     dc->vmsd = &vmstate_strongarm_pic_regs;
 228 }
 229
 230 static const TypeInfo strongarm_pic_info = {
 231     .name          = TYPE_STRONGARM_PIC,
 232     .parent        = TYPE_SYS_BUS_DEVICE,
 233     .instance_size = sizeof(StrongARMPICState),
 234     .instance_init = strongarm_pic_initfn,
 235     .class_init    = strongarm_pic_class_init,
 236 };
 237
 238 /* Real-Time Clock */
 239 #define RTAR 0x00 /* RTC Alarm register */
 240 #define RCNR 0x04 /* RTC Counter register */
 241 #define RTTR 0x08 /* RTC Timer Trim register */
 242 #define RTSR 0x10 /* RTC Status register */
 243
 244 #define RTSR_AL (1 << 0) /* RTC Alarm detected */
 245 #define RTSR_HZ (1 << 1) /* RTC 1Hz detected */
 246 #define RTSR_ALE (1 << 2) /* RTC Alarm enable */
 247 #define RTSR_HZE (1 << 3) /* RTC 1Hz enable */
 248
 249 /* 16 LSB of RTTR are clockdiv for internal trim logic,
 250  * trim delete isn't emulated, so
 251  * f = 32 768 / (RTTR_trim + 1) */
 252
 253 #define TYPE_STRONGARM_RTC "strongarm-rtc"
 254 #define STRONGARM_RTC(obj) \
 255     OBJECT_CHECK(StrongARMRTCState, (obj), TYPE_STRONGARM_RTC)
 256
 257 typedef struct StrongARMRTCState {
 258     SysBusDevice parent_obj;
 259
 260     MemoryRegion iomem;
 261     uint32_t rttr;
 262     uint32_t rtsr;
 263     uint32_t rtar;
 264     uint32_t last_rcnr;
 265     int64_t last_hz;
 266     QEMUTimer *rtc_alarm;
 267     QEMUTimer *rtc_hz;
 268     qemu_irq rtc_irq;
 269     qemu_irq rtc_hz_irq;
 270 } StrongARMRTCState;
 271
 272 static inline void strongarm_rtc_int_update(StrongARMRTCState *s)
 273 {
 274     qemu_set_irq(s->rtc_irq, s->rtsr & RTSR_AL);
 275     qemu_set_irq(s->rtc_hz_irq, s->rtsr & RTSR_HZ);
 276 }
 277
 278 static void strongarm_rtc_hzupdate(StrongARMRTCState *s)
 279 {
 280     int64_t rt = qemu_clock_get_ms(rtc_clock);
 281     s->last_rcnr += ((rt - s->last_hz) << 15) /
 282             (1000 * ((s->rttr & 0xffff) + 1));
 283     s->last_hz = rt;
 284 }
 285
 286 static inline void strongarm_rtc_timer_update(StrongARMRTCState *s)
 287 {
 288     if ((s->rtsr & RTSR_HZE) && !(s->rtsr & RTSR_HZ)) {
 289         timer_mod(s->rtc_hz, s->last_hz + 1000);
 290     } else {
 291         timer_del(s->rtc_hz);
 292     }
 293
 294     if ((s->rtsr & RTSR_ALE) && !(s->rtsr & RTSR_AL)) {
 295         timer_mod(s->rtc_alarm, s->last_hz +
 296                 (((s->rtar - s->last_rcnr) * 1000 *
 297                   ((s->rttr & 0xffff) + 1)) >> 15));
 298     } else {
 299         timer_del(s->rtc_alarm);
 300     }
 301 }
 302
 303 static inline void strongarm_rtc_alarm_tick(void *opaque)
 304 {
 305     StrongARMRTCState *s = opaque;
 306     s->rtsr |= RTSR_AL;
 307     strongarm_rtc_timer_update(s);
 308     strongarm_rtc_int_update(s);
 309 }
 310
 311 static inline void strongarm_rtc_hz_tick(void *opaque)
 312 {
 313     StrongARMRTCState *s = opaque;
 314     s->rtsr |= RTSR_HZ;
 315     strongarm_rtc_timer_update(s);
 316     strongarm_rtc_int_update(s);
 317 }
 318
 319 static uint64_t strongarm_rtc_read(void *opaque, hwaddr addr,
 320                                    unsigned size)
 321 {
 322     StrongARMRTCState *s = opaque;
 323
 324     switch (addr) {
 325     case RTTR:
 326         return s->rttr;
 327     case RTSR:
 328         return s->rtsr;
 329     case RTAR:
 330         return s->rtar;
 331     case RCNR:
 332         return s->last_rcnr +
 333                 ((qemu_clock_get_ms(rtc_clock) - s->last_hz) << 15) /
 334                 (1000 * ((s->rttr & 0xffff) + 1));
 335     default:
 336         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
 337         return 0;
 338     }
 339 }
 340
 341 static void strongarm_rtc_write(void *opaque, hwaddr addr,
 342                                 uint64_t value, unsigned size)
 343 {
 344     StrongARMRTCState *s = opaque;
 345     uint32_t old_rtsr;
 346
 347     switch (addr) {
 348     case RTTR:
 349         strongarm_rtc_hzupdate(s);
 350         s->rttr = value;
 351         strongarm_rtc_timer_update(s);
 352         break;
 353
 354     case RTSR:
 355         old_rtsr = s->rtsr;
 356         s->rtsr = (value & (RTSR_ALE | RTSR_HZE)) |
 357                   (s->rtsr & ~(value & (RTSR_AL | RTSR_HZ)));
 358
 359         if (s->rtsr != old_rtsr) {
 360             strongarm_rtc_timer_update(s);
 361         }
 362
 363         strongarm_rtc_int_update(s);
 364         break;
 365
 366     case RTAR:
 367         s->rtar = value;
 368         strongarm_rtc_timer_update(s);
 369         break;
 370
 371     case RCNR:
 372         strongarm_rtc_hzupdate(s);
 373         s->last_rcnr = value;
 374         strongarm_rtc_timer_update(s);
 375         break;
 376
 377     default:
 378         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
 379     }
 380 }
 381
 382 static const MemoryRegionOps strongarm_rtc_ops = {
 383     .read = strongarm_rtc_read,
 384     .write = strongarm_rtc_write,
 385     .endianness = DEVICE_NATIVE_ENDIAN,
 386 };
 387
 388 static void strongarm_rtc_init(Object *obj)
 389 {
 390     StrongARMRTCState *s = STRONGARM_RTC(obj);
 391     SysBusDevice *dev = SYS_BUS_DEVICE(obj);
 392     struct tm tm;
 393
 394     s->rttr = 0x0;
 395     s->rtsr = 0;
 396
 397     qemu_get_timedate(&tm, 0);
 398
 399     s->last_rcnr = (uint32_t) mktimegm(&tm);
 400     s->last_hz = qemu_clock_get_ms(rtc_clock);
 401
 402     s->rtc_alarm = timer_new_ms(rtc_clock, strongarm_rtc_alarm_tick, s);
 403     s->rtc_hz = timer_new_ms(rtc_clock, strongarm_rtc_hz_tick, s);
 404
 405     sysbus_init_irq(dev, &s->rtc_irq);
 406     sysbus_init_irq(dev, &s->rtc_hz_irq);
 407
 408     memory_region_init_io(&s->iomem, obj, &strongarm_rtc_ops, s,
 409                           "rtc", 0x10000);
 410     sysbus_init_mmio(dev, &s->iomem);
 411 }
 412
 413 static int strongarm_rtc_pre_save(void *opaque)
 414 {
 415     StrongARMRTCState *s = opaque;
 416
 417     strongarm_rtc_hzupdate(s);
 418
 419     return 0;
 420 }
 421
 422 static int strongarm_rtc_post_load(void *opaque, int version_id)
 423 {
 424     StrongARMRTCState *s = opaque;
 425
 426     strongarm_rtc_timer_update(s);
 427     strongarm_rtc_int_update(s);
 428
 429     return 0;
 430 }
 431
 432 static const VMStateDescription vmstate_strongarm_rtc_regs = {
 433     .name = "strongarm-rtc",
 434     .version_id = 0,
 435     .minimum_version_id = 0,
 436     .pre_save = strongarm_rtc_pre_save,
 437     .post_load = strongarm_rtc_post_load,
 438     .fields = (VMStateField[]) {
 439         VMSTATE_UINT32(rttr, StrongARMRTCState),
 440         VMSTATE_UINT32(rtsr, StrongARMRTCState),
 441         VMSTATE_UINT32(rtar, StrongARMRTCState),
 442         VMSTATE_UINT32(last_rcnr, StrongARMRTCState),
 443         VMSTATE_INT64(last_hz, StrongARMRTCState),
 444         VMSTATE_END_OF_LIST(),
 445     },
 446 };
 447
 448 static void strongarm_rtc_sysbus_class_init(ObjectClass *klass, void *data)
 449 {
 450     DeviceClass *dc = DEVICE_CLASS(klass);
 451
 452     dc->desc = "StrongARM RTC Controller";
 453     dc->vmsd = &vmstate_strongarm_rtc_regs;
 454 }
 455
 456 static const TypeInfo strongarm_rtc_sysbus_info = {
 457     .name          = TYPE_STRONGARM_RTC,
 458     .parent        = TYPE_SYS_BUS_DEVICE,
 459     .instance_size = sizeof(StrongARMRTCState),
 460     .instance_init = strongarm_rtc_init,
 461     .class_init    = strongarm_rtc_sysbus_class_init,
 462 };
 463
 464 /* GPIO */
 465 #define GPLR 0x00
 466 #define GPDR 0x04
 467 #define GPSR 0x08
 468 #define GPCR 0x0c
 469 #define GRER 0x10
 470 #define GFER 0x14
 471 #define GEDR 0x18
 472 #define GAFR 0x1c
 473
 474 #define TYPE_STRONGARM_GPIO "strongarm-gpio"
 475 #define STRONGARM_GPIO(obj) \
 476     OBJECT_CHECK(StrongARMGPIOInfo, (obj), TYPE_STRONGARM_GPIO)
 477
 478 typedef struct StrongARMGPIOInfo StrongARMGPIOInfo;
 479 struct StrongARMGPIOInfo {
 480     SysBusDevice busdev;
 481     MemoryRegion iomem;
 482     qemu_irq handler[28];
 483     qemu_irq irqs[11];
 484     qemu_irq irqX;
 485
 486     uint32_t ilevel;
 487     uint32_t olevel;
 488     uint32_t dir;
 489     uint32_t rising;
 490     uint32_t falling;
 491     uint32_t status;
 492     uint32_t gafr;
 493
 494     uint32_t prev_level;
 495 };
 496
 497
 498 static void strongarm_gpio_irq_update(StrongARMGPIOInfo *s)
 499 {
 500     int i;
 501     for (i = 0; i < 11; i++) {
 502         qemu_set_irq(s->irqs[i], s->status & (1 << i));
 503     }
 504
 505     qemu_set_irq(s->irqX, (s->status & ~0x7ff));
 506 }
 507
 508 static void strongarm_gpio_set(void *opaque, int line, int level)
 509 {
 510     StrongARMGPIOInfo *s = opaque;
 511     uint32_t mask;
 512
 513     mask = 1 << line;
 514
 515     if (level) {
 516         s->status |= s->rising & mask &
 517                 ~s->ilevel & ~s->dir;
 518         s->ilevel |= mask;
 519     } else {
 520         s->status |= s->falling & mask &
 521                 s->ilevel & ~s->dir;
 522         s->ilevel &= ~mask;
 523     }
 524
 525     if (s->status & mask) {
 526         strongarm_gpio_irq_update(s);
 527     }
 528 }
 529
 530 static void strongarm_gpio_handler_update(StrongARMGPIOInfo *s)
 531 {
 532     uint32_t level, diff;
 533     int bit;
 534
 535     level = s->olevel & s->dir;
 536
 537     for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
 538         bit = ctz32(diff);
 539         qemu_set_irq(s->handler[bit], (level >> bit) & 1);
 540     }
 541
 542     s->prev_level = level;
 543 }
 544
 545 static uint64_t strongarm_gpio_read(void *opaque, hwaddr offset,
 546                                     unsigned size)
 547 {
 548     StrongARMGPIOInfo *s = opaque;
 549
 550     switch (offset) {
 551     case GPDR:        /* GPIO Pin-Direction registers */
 552         return s->dir;
 553
 554     case GPSR:        /* GPIO Pin-Output Set registers */
 555         qemu_log_mask(LOG_GUEST_ERROR,
 556                       "strongarm GPIO: read from write only register GPSR\n");
 557         return 0;
 558
 559     case GPCR:        /* GPIO Pin-Output Clear registers */
 560         qemu_log_mask(LOG_GUEST_ERROR,
 561                       "strongarm GPIO: read from write only register GPCR\n");
 562         return 0;
 563
 564     case GRER:        /* GPIO Rising-Edge Detect Enable registers */
 565         return s->rising;
 566
 567     case GFER:        /* GPIO Falling-Edge Detect Enable registers */
 568         return s->falling;
 569
 570     case GAFR:        /* GPIO Alternate Function registers */
 571         return s->gafr;
 572
 573     case GPLR:        /* GPIO Pin-Level registers */
 574         return (s->olevel & s->dir) |
 575                (s->ilevel & ~s->dir);
 576
 577     case GEDR:        /* GPIO Edge Detect Status registers */
 578         return s->status;
 579
 580     default:
 581         printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset);
 582     }
 583
 584     return 0;
 585 }
 586
 587 static void strongarm_gpio_write(void *opaque, hwaddr offset,
 588                                  uint64_t value, unsigned size)
 589 {
 590     StrongARMGPIOInfo *s = opaque;
 591
 592     switch (offset) {
 593     case GPDR:        /* GPIO Pin-Direction registers */
 594         s->dir = value & 0x0fffffff;
 595         strongarm_gpio_handler_update(s);
 596         break;
 597
 598     case GPSR:        /* GPIO Pin-Output Set registers */
 599         s->olevel |= value & 0x0fffffff;
 600         strongarm_gpio_handler_update(s);
 601         break;
 602
 603     case GPCR:        /* GPIO Pin-Output Clear registers */
 604         s->olevel &= ~value;
 605         strongarm_gpio_handler_update(s);
 606         break;
 607
 608     case GRER:        /* GPIO Rising-Edge Detect Enable registers */
 609         s->rising = value;
 610         break;
 611
 612     case GFER:        /* GPIO Falling-Edge Detect Enable registers */
 613         s->falling = value;
 614         break;
 615
 616     case GAFR:        /* GPIO Alternate Function registers */
 617         s->gafr = value;
 618         break;
 619
 620     case GEDR:        /* GPIO Edge Detect Status registers */
 621         s->status &= ~value;
 622         strongarm_gpio_irq_update(s);
 623         break;
 624
 625     default:
 626         printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset);
 627     }
 628 }
 629
 630 static const MemoryRegionOps strongarm_gpio_ops = {
 631     .read = strongarm_gpio_read,
 632     .write = strongarm_gpio_write,
 633     .endianness = DEVICE_NATIVE_ENDIAN,
 634 };
 635
 636 static DeviceState *strongarm_gpio_init(hwaddr base,
 637                 DeviceState *pic)
 638 {
 639     DeviceState *dev;
 640     int i;
 641
 642     dev = qdev_create(NULL, TYPE_STRONGARM_GPIO);
 643     qdev_init_nofail(dev);
 644
 645     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
 646     for (i = 0; i < 12; i++)
 647         sysbus_connect_irq(SYS_BUS_DEVICE(dev), i,
 648                     qdev_get_gpio_in(pic, SA_PIC_GPIO0_EDGE + i));
 649
 650     return dev;
 651 }
 652
 653 static void strongarm_gpio_initfn(Object *obj)
 654 {
 655     DeviceState *dev = DEVICE(obj);
 656     StrongARMGPIOInfo *s = STRONGARM_GPIO(obj);
 657     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 658     int i;
 659
 660     qdev_init_gpio_in(dev, strongarm_gpio_set, 28);
 661     qdev_init_gpio_out(dev, s->handler, 28);
 662
 663     memory_region_init_io(&s->iomem, obj, &strongarm_gpio_ops, s,
 664                           "gpio", 0x1000);
 665
 666     sysbus_init_mmio(sbd, &s->iomem);
 667     for (i = 0; i < 11; i++) {
 668         sysbus_init_irq(sbd, &s->irqs[i]);
 669     }
 670     sysbus_init_irq(sbd, &s->irqX);
 671 }
 672
 673 static const VMStateDescription vmstate_strongarm_gpio_regs = {
 674     .name = "strongarm-gpio",
 675     .version_id = 0,
 676     .minimum_version_id = 0,
 677     .fields = (VMStateField[]) {
 678         VMSTATE_UINT32(ilevel, StrongARMGPIOInfo),
 679         VMSTATE_UINT32(olevel, StrongARMGPIOInfo),
 680         VMSTATE_UINT32(dir, StrongARMGPIOInfo),
 681         VMSTATE_UINT32(rising, StrongARMGPIOInfo),
 682         VMSTATE_UINT32(falling, StrongARMGPIOInfo),
 683         VMSTATE_UINT32(status, StrongARMGPIOInfo),
 684         VMSTATE_UINT32(gafr, StrongARMGPIOInfo),
 685         VMSTATE_UINT32(prev_level, StrongARMGPIOInfo),
 686         VMSTATE_END_OF_LIST(),
 687     },
 688 };
 689
 690 static void strongarm_gpio_class_init(ObjectClass *klass, void *data)
 691 {
 692     DeviceClass *dc = DEVICE_CLASS(klass);
 693
 694     dc->desc = "StrongARM GPIO controller";
 695     dc->vmsd = &vmstate_strongarm_gpio_regs;
 696 }
 697
 698 static const TypeInfo strongarm_gpio_info = {
 699     .name          = TYPE_STRONGARM_GPIO,
 700     .parent        = TYPE_SYS_BUS_DEVICE,
 701     .instance_size = sizeof(StrongARMGPIOInfo),
 702     .instance_init = strongarm_gpio_initfn,
 703     .class_init    = strongarm_gpio_class_init,
 704 };
 705
 706 /* Peripheral Pin Controller */
 707 #define PPDR 0x00
 708 #define PPSR 0x04
 709 #define PPAR 0x08
 710 #define PSDR 0x0c
 711 #define PPFR 0x10
 712
 713 #define TYPE_STRONGARM_PPC "strongarm-ppc"
 714 #define STRONGARM_PPC(obj) \
 715     OBJECT_CHECK(StrongARMPPCInfo, (obj), TYPE_STRONGARM_PPC)
 716
 717 typedef struct StrongARMPPCInfo StrongARMPPCInfo;
 718 struct StrongARMPPCInfo {
 719     SysBusDevice parent_obj;
 720
 721     MemoryRegion iomem;
 722     qemu_irq handler[28];
 723
 724     uint32_t ilevel;
 725     uint32_t olevel;
 726     uint32_t dir;
 727     uint32_t ppar;
 728     uint32_t psdr;
 729     uint32_t ppfr;
 730
 731     uint32_t prev_level;
 732 };
 733
 734 static void strongarm_ppc_set(void *opaque, int line, int level)
 735 {
 736     StrongARMPPCInfo *s = opaque;
 737
 738     if (level) {
 739         s->ilevel |= 1 << line;
 740     } else {
 741         s->ilevel &= ~(1 << line);
 742     }
 743 }
 744
 745 static void strongarm_ppc_handler_update(StrongARMPPCInfo *s)
 746 {
 747     uint32_t level, diff;
 748     int bit;
 749
 750     level = s->olevel & s->dir;
 751
 752     for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
 753         bit = ctz32(diff);
 754         qemu_set_irq(s->handler[bit], (level >> bit) & 1);
 755     }
 756
 757     s->prev_level = level;
 758 }
 759
 760 static uint64_t strongarm_ppc_read(void *opaque, hwaddr offset,
 761                                    unsigned size)
 762 {
 763     StrongARMPPCInfo *s = opaque;
 764
 765     switch (offset) {
 766     case PPDR:        /* PPC Pin Direction registers */
 767         return s->dir | ~0x3fffff;
 768
 769     case PPSR:        /* PPC Pin State registers */
 770         return (s->olevel & s->dir) |
 771                (s->ilevel & ~s->dir) |
 772                ~0x3fffff;
 773
 774     case PPAR:
 775         return s->ppar | ~0x41000;
 776
 777     case PSDR:
 778         return s->psdr;
 779
 780     case PPFR:
 781         return s->ppfr | ~0x7f001;
 782
 783     default:
 784         printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset);
 785     }
 786
 787     return 0;
 788 }
 789
 790 static void strongarm_ppc_write(void *opaque, hwaddr offset,
 791                                 uint64_t value, unsigned size)
 792 {
 793     StrongARMPPCInfo *s = opaque;
 794
 795     switch (offset) {
 796     case PPDR:        /* PPC Pin Direction registers */
 797         s->dir = value & 0x3fffff;
 798         strongarm_ppc_handler_update(s);
 799         break;
 800
 801     case PPSR:        /* PPC Pin State registers */
 802         s->olevel = value & s->dir & 0x3fffff;
 803         strongarm_ppc_handler_update(s);
 804         break;
 805
 806     case PPAR:
 807         s->ppar = value & 0x41000;
 808         break;
 809
 810     case PSDR:
 811         s->psdr = value & 0x3fffff;
 812         break;
 813
 814     case PPFR:
 815         s->ppfr = value & 0x7f001;
 816         break;
 817
 818     default:
 819         printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset);
 820     }
 821 }
 822
 823 static const MemoryRegionOps strongarm_ppc_ops = {
 824     .read = strongarm_ppc_read,
 825     .write = strongarm_ppc_write,
 826     .endianness = DEVICE_NATIVE_ENDIAN,
 827 };
 828
 829 static void strongarm_ppc_init(Object *obj)
 830 {
 831     DeviceState *dev = DEVICE(obj);
 832     StrongARMPPCInfo *s = STRONGARM_PPC(obj);
 833     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 834
 835     qdev_init_gpio_in(dev, strongarm_ppc_set, 22);
 836     qdev_init_gpio_out(dev, s->handler, 22);
 837
 838     memory_region_init_io(&s->iomem, obj, &strongarm_ppc_ops, s,
 839                           "ppc", 0x1000);
 840
 841     sysbus_init_mmio(sbd, &s->iomem);
 842 }
 843
 844 static const VMStateDescription vmstate_strongarm_ppc_regs = {
 845     .name = "strongarm-ppc",
 846     .version_id = 0,
 847     .minimum_version_id = 0,
 848     .fields = (VMStateField[]) {
 849         VMSTATE_UINT32(ilevel, StrongARMPPCInfo),
 850         VMSTATE_UINT32(olevel, StrongARMPPCInfo),
 851         VMSTATE_UINT32(dir, StrongARMPPCInfo),
 852         VMSTATE_UINT32(ppar, StrongARMPPCInfo),
 853         VMSTATE_UINT32(psdr, StrongARMPPCInfo),
 854         VMSTATE_UINT32(ppfr, StrongARMPPCInfo),
 855         VMSTATE_UINT32(prev_level, StrongARMPPCInfo),
 856         VMSTATE_END_OF_LIST(),
 857     },
 858 };
 859
 860 static void strongarm_ppc_class_init(ObjectClass *klass, void *data)
 861 {
 862     DeviceClass *dc = DEVICE_CLASS(klass);
 863
 864     dc->desc = "StrongARM PPC controller";
 865     dc->vmsd = &vmstate_strongarm_ppc_regs;
 866 }
 867
 868 static const TypeInfo strongarm_ppc_info = {
 869     .name          = TYPE_STRONGARM_PPC,
 870     .parent        = TYPE_SYS_BUS_DEVICE,
 871     .instance_size = sizeof(StrongARMPPCInfo),
 872     .instance_init = strongarm_ppc_init,
 873     .class_init    = strongarm_ppc_class_init,
 874 };
 875
 876 /* UART Ports */
 877 #define UTCR0 0x00
 878 #define UTCR1 0x04
 879 #define UTCR2 0x08
 880 #define UTCR3 0x0c
 881 #define UTDR  0x14
 882 #define UTSR0 0x1c
 883 #define UTSR1 0x20
 884
 885 #define UTCR0_PE  (1 << 0) /* Parity enable */
 886 #define UTCR0_OES (1 << 1) /* Even parity */
 887 #define UTCR0_SBS (1 << 2) /* 2 stop bits */
 888 #define UTCR0_DSS (1 << 3) /* 8-bit data */
 889
 890 #define UTCR3_RXE (1 << 0) /* Rx enable */
 891 #define UTCR3_TXE (1 << 1) /* Tx enable */
 892 #define UTCR3_BRK (1 << 2) /* Force Break */
 893 #define UTCR3_RIE (1 << 3) /* Rx int enable */
 894 #define UTCR3_TIE (1 << 4) /* Tx int enable */
 895 #define UTCR3_LBM (1 << 5) /* Loopback */
 896
 897 #define UTSR0_TFS (1 << 0) /* Tx FIFO nearly empty */
 898 #define UTSR0_RFS (1 << 1) /* Rx FIFO nearly full */
 899 #define UTSR0_RID (1 << 2) /* Receiver Idle */
 900 #define UTSR0_RBB (1 << 3) /* Receiver begin break */
 901 #define UTSR0_REB (1 << 4) /* Receiver end break */
 902 #define UTSR0_EIF (1 << 5) /* Error in FIFO */
 903
 904 #define UTSR1_RNE (1 << 1) /* Receive FIFO not empty */
 905 #define UTSR1_TNF (1 << 2) /* Transmit FIFO not full */
 906 #define UTSR1_PRE (1 << 3) /* Parity error */
 907 #define UTSR1_FRE (1 << 4) /* Frame error */
 908 #define UTSR1_ROR (1 << 5) /* Receive Over Run */
 909
 910 #define RX_FIFO_PRE (1 << 8)
 911 #define RX_FIFO_FRE (1 << 9)
 912 #define RX_FIFO_ROR (1 << 10)
 913
 914 #define TYPE_STRONGARM_UART "strongarm-uart"
 915 #define STRONGARM_UART(obj) \
 916     OBJECT_CHECK(StrongARMUARTState, (obj), TYPE_STRONGARM_UART)
 917
 918 typedef struct StrongARMUARTState {
 919     SysBusDevice parent_obj;
 920
 921     MemoryRegion iomem;
 922     CharBackend chr;
 923     qemu_irq irq;
 924
 925     uint8_t utcr0;
 926     uint16_t brd;
 927     uint8_t utcr3;
 928     uint8_t utsr0;
 929     uint8_t utsr1;
 930
 931     uint8_t tx_fifo[8];
 932     uint8_t tx_start;
 933     uint8_t tx_len;
 934     uint16_t rx_fifo[12]; /* value + error flags in high bits */
 935     uint8_t rx_start;
 936     uint8_t rx_len;
 937
 938     uint64_t char_transmit_time; /* time to transmit a char in ticks*/
 939     bool wait_break_end;
 940     QEMUTimer *rx_timeout_timer;
 941     QEMUTimer *tx_timer;
 942 } StrongARMUARTState;
 943
 944 static void strongarm_uart_update_status(StrongARMUARTState *s)
 945 {
 946     uint16_t utsr1 = 0;
 947
 948     if (s->tx_len != 8) {
 949         utsr1 |= UTSR1_TNF;
 950     }
 951
 952     if (s->rx_len != 0) {
 953         uint16_t ent = s->rx_fifo[s->rx_start];
 954
 955         utsr1 |= UTSR1_RNE;
 956         if (ent & RX_FIFO_PRE) {
 957             s->utsr1 |= UTSR1_PRE;
 958         }
 959         if (ent & RX_FIFO_FRE) {
 960             s->utsr1 |= UTSR1_FRE;
 961         }
 962         if (ent & RX_FIFO_ROR) {
 963             s->utsr1 |= UTSR1_ROR;
 964         }
 965     }
 966
 967     s->utsr1 = utsr1;
 968 }
 969
 970 static void strongarm_uart_update_int_status(StrongARMUARTState *s)
 971 {
 972     uint16_t utsr0 = s->utsr0 &
 973             (UTSR0_REB | UTSR0_RBB | UTSR0_RID);
 974     int i;
 975
 976     if ((s->utcr3 & UTCR3_TXE) &&
 977                 (s->utcr3 & UTCR3_TIE) &&
 978                 s->tx_len <= 4) {
 979         utsr0 |= UTSR0_TFS;
 980     }
 981
 982     if ((s->utcr3 & UTCR3_RXE) &&
 983                 (s->utcr3 & UTCR3_RIE) &&
 984                 s->rx_len > 4) {
 985         utsr0 |= UTSR0_RFS;
 986     }
 987
 988     for (i = 0; i < s->rx_len && i < 4; i++)
 989         if (s->rx_fifo[(s->rx_start + i) % 12] & ~0xff) {
 990             utsr0 |= UTSR0_EIF;
 991             break;
 992         }
 993
 994     s->utsr0 = utsr0;
 995     qemu_set_irq(s->irq, utsr0);
 996 }
 997
 998 static void strongarm_uart_update_parameters(StrongARMUARTState *s)
 999 {
1000     int speed, parity, data_bits, stop_bits, frame_size;
1001     QEMUSerialSetParams ssp;
1002
1003     /* Start bit. */
1004     frame_size = 1;
1005     if (s->utcr0 & UTCR0_PE) {
1006         /* Parity bit. */
1007         frame_size++;
1008         if (s->utcr0 & UTCR0_OES) {
1009             parity = 'E';
1010         } else {
1011             parity = 'O';
1012         }
1013     } else {
1014             parity = 'N';
1015     }
1016     if (s->utcr0 & UTCR0_SBS) {
1017         stop_bits = 2;
1018     } else {
1019         stop_bits = 1;
1020     }
1021
1022     data_bits = (s->utcr0 & UTCR0_DSS) ? 8 : 7;
1023     frame_size += data_bits + stop_bits;
1024     speed = 3686400 / 16 / (s->brd + 1);
1025     ssp.speed = speed;
1026     ssp.parity = parity;
1027     ssp.data_bits = data_bits;
1028     ssp.stop_bits = stop_bits;
1029     s->char_transmit_time =  (NANOSECONDS_PER_SECOND / speed) * frame_size;
1030     qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
1031
1032     DPRINTF(stderr, "%s speed=%d parity=%c data=%d stop=%d\n", s->chr->label,
1033             speed, parity, data_bits, stop_bits);
1034 }
1035
1036 static void strongarm_uart_rx_to(void *opaque)
1037 {
1038     StrongARMUARTState *s = opaque;
1039
1040     if (s->rx_len) {
1041         s->utsr0 |= UTSR0_RID;
1042         strongarm_uart_update_int_status(s);
1043     }
1044 }
1045
1046 static void strongarm_uart_rx_push(StrongARMUARTState *s, uint16_t c)
1047 {
1048     if ((s->utcr3 & UTCR3_RXE) == 0) {
1049         /* rx disabled */
1050         return;
1051     }
1052
1053     if (s->wait_break_end) {
1054         s->utsr0 |= UTSR0_REB;
1055         s->wait_break_end = false;
1056     }
1057
1058     if (s->rx_len < 12) {
1059         s->rx_fifo[(s->rx_start + s->rx_len) % 12] = c;
1060         s->rx_len++;
1061     } else
1062         s->rx_fifo[(s->rx_start + 11) % 12] |= RX_FIFO_ROR;
1063 }
1064
1065 static int strongarm_uart_can_receive(void *opaque)
1066 {
1067     StrongARMUARTState *s = opaque;
1068
1069     if (s->rx_len == 12) {
1070         return 0;
1071     }
1072     /* It's best not to get more than 2/3 of RX FIFO, so advertise that much */
1073     if (s->rx_len < 8) {
1074         return 8 - s->rx_len;
1075     }
1076     return 1;
1077 }
1078
1079 static void strongarm_uart_receive(void *opaque, const uint8_t *buf, int size)
1080 {
1081     StrongARMUARTState *s = opaque;
1082     int i;
1083
1084     for (i = 0; i < size; i++) {
1085         strongarm_uart_rx_push(s, buf[i]);
1086     }
1087
1088     /* call the timeout receive callback in 3 char transmit time */
1089     timer_mod(s->rx_timeout_timer,
1090                     qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 3);
1091
1092     strongarm_uart_update_status(s);
1093     strongarm_uart_update_int_status(s);
1094 }
1095
1096 static void strongarm_uart_event(void *opaque, int event)
1097 {
1098     StrongARMUARTState *s = opaque;
1099     if (event == CHR_EVENT_BREAK) {
1100         s->utsr0 |= UTSR0_RBB;
1101         strongarm_uart_rx_push(s, RX_FIFO_FRE);
1102         s->wait_break_end = true;
1103         strongarm_uart_update_status(s);
1104         strongarm_uart_update_int_status(s);
1105     }
1106 }
1107
1108 static void strongarm_uart_tx(void *opaque)
1109 {
1110     StrongARMUARTState *s = opaque;
1111     uint64_t new_xmit_ts = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
1112
1113     if (s->utcr3 & UTCR3_LBM) /* loopback */ {
1114         strongarm_uart_receive(s, &s->tx_fifo[s->tx_start], 1);
1115     } else if (qemu_chr_fe_backend_connected(&s->chr)) {
1116         /* XXX this blocks entire thread. Rewrite to use
1117          * qemu_chr_fe_write and background I/O callbacks */
1118         qemu_chr_fe_write_all(&s->chr, &s->tx_fifo[s->tx_start], 1);
1119     }
1120
1121     s->tx_start = (s->tx_start + 1) % 8;
1122     s->tx_len--;
1123     if (s->tx_len) {
1124         timer_mod(s->tx_timer, new_xmit_ts + s->char_transmit_time);
1125     }
1126     strongarm_uart_update_status(s);
1127     strongarm_uart_update_int_status(s);
1128 }
1129
1130 static uint64_t strongarm_uart_read(void *opaque, hwaddr addr,
1131                                     unsigned size)
1132 {
1133     StrongARMUARTState *s = opaque;
1134     uint16_t ret;
1135
1136     switch (addr) {
1137     case UTCR0:
1138         return s->utcr0;
1139
1140     case UTCR1:
1141         return s->brd >> 8;
1142
1143     case UTCR2:
1144         return s->brd & 0xff;
1145
1146     case UTCR3:
1147         return s->utcr3;
1148
1149     case UTDR:
1150         if (s->rx_len != 0) {
1151             ret = s->rx_fifo[s->rx_start];
1152             s->rx_start = (s->rx_start + 1) % 12;
1153             s->rx_len--;
1154             strongarm_uart_update_status(s);
1155             strongarm_uart_update_int_status(s);
1156             return ret;
1157         }
1158         return 0;
1159
1160     case UTSR0:
1161         return s->utsr0;
1162
1163     case UTSR1:
1164         return s->utsr1;
1165
1166     default:
1167         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
1168         return 0;
1169     }
1170 }
1171
1172 static void strongarm_uart_write(void *opaque, hwaddr addr,
1173                                  uint64_t value, unsigned size)
1174 {
1175     StrongARMUARTState *s = opaque;
1176
1177     switch (addr) {
1178     case UTCR0:
1179         s->utcr0 = value & 0x7f;
1180         strongarm_uart_update_parameters(s);
1181         break;
1182
1183     case UTCR1:
1184         s->brd = (s->brd & 0xff) | ((value & 0xf) << 8);
1185         strongarm_uart_update_parameters(s);
1186         break;
1187
1188     case UTCR2:
1189         s->brd = (s->brd & 0xf00) | (value & 0xff);
1190         strongarm_uart_update_parameters(s);
1191         break;
1192
1193     case UTCR3:
1194         s->utcr3 = value & 0x3f;
1195         if ((s->utcr3 & UTCR3_RXE) == 0) {
1196             s->rx_len = 0;
1197         }
1198         if ((s->utcr3 & UTCR3_TXE) == 0) {
1199             s->tx_len = 0;
1200         }
1201         strongarm_uart_update_status(s);
1202         strongarm_uart_update_int_status(s);
1203         break;
1204
1205     case UTDR:
1206         if ((s->utcr3 & UTCR3_TXE) && s->tx_len != 8) {
1207             s->tx_fifo[(s->tx_start + s->tx_len) % 8] = value;
1208             s->tx_len++;
1209             strongarm_uart_update_status(s);
1210             strongarm_uart_update_int_status(s);
1211             if (s->tx_len == 1) {
1212                 strongarm_uart_tx(s);
1213             }
1214         }
1215         break;
1216
1217     case UTSR0:
1218         s->utsr0 = s->utsr0 & ~(value &
1219                 (UTSR0_REB | UTSR0_RBB | UTSR0_RID));
1220         strongarm_uart_update_int_status(s);
1221         break;
1222
1223     default:
1224         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
1225     }
1226 }
1227
1228 static const MemoryRegionOps strongarm_uart_ops = {
1229     .read = strongarm_uart_read,
1230     .write = strongarm_uart_write,
1231     .endianness = DEVICE_NATIVE_ENDIAN,
1232 };
1233
1234 static void strongarm_uart_init(Object *obj)
1235 {
1236     StrongARMUARTState *s = STRONGARM_UART(obj);
1237     SysBusDevice *dev = SYS_BUS_DEVICE(obj);
1238
1239     memory_region_init_io(&s->iomem, obj, &strongarm_uart_ops, s,
1240                           "uart", 0x10000);
1241     sysbus_init_mmio(dev, &s->iomem);
1242     sysbus_init_irq(dev, &s->irq);
1243
1244     s->rx_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_rx_to, s);
1245     s->tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_tx, s);
1246 }
1247
1248 static void strongarm_uart_realize(DeviceState *dev, Error **errp)
1249 {
1250     StrongARMUARTState *s = STRONGARM_UART(dev);
1251
1252     qemu_chr_fe_set_handlers(&s->chr,
1253                              strongarm_uart_can_receive,
1254                              strongarm_uart_receive,
1255                              strongarm_uart_event,
1256                              NULL, s, NULL, true);
1257 }
1258
1259 static void strongarm_uart_reset(DeviceState *dev)
1260 {
1261     StrongARMUARTState *s = STRONGARM_UART(dev);
1262
1263     s->utcr0 = UTCR0_DSS; /* 8 data, no parity */
1264     s->brd = 23;    /* 9600 */
1265     /* enable send & recv - this actually violates spec */
1266     s->utcr3 = UTCR3_TXE | UTCR3_RXE;
1267
1268     s->rx_len = s->tx_len = 0;
1269
1270     strongarm_uart_update_parameters(s);
1271     strongarm_uart_update_status(s);
1272     strongarm_uart_update_int_status(s);
1273 }
1274
1275 static int strongarm_uart_post_load(void *opaque, int version_id)
1276 {
1277     StrongARMUARTState *s = opaque;
1278
1279     strongarm_uart_update_parameters(s);
1280     strongarm_uart_update_status(s);
1281     strongarm_uart_update_int_status(s);
1282
1283     /* tx and restart timer */
1284     if (s->tx_len) {
1285         strongarm_uart_tx(s);
1286     }
1287
1288     /* restart rx timeout timer */
1289     if (s->rx_len) {
1290         timer_mod(s->rx_timeout_timer,
1291                 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 3);
1292     }
1293
1294     return 0;
1295 }
1296
1297 static const VMStateDescription vmstate_strongarm_uart_regs = {
1298     .name = "strongarm-uart",
1299     .version_id = 0,
1300     .minimum_version_id = 0,
1301     .post_load = strongarm_uart_post_load,
1302     .fields = (VMStateField[]) {
1303         VMSTATE_UINT8(utcr0, StrongARMUARTState),
1304         VMSTATE_UINT16(brd, StrongARMUARTState),
1305         VMSTATE_UINT8(utcr3, StrongARMUARTState),
1306         VMSTATE_UINT8(utsr0, StrongARMUARTState),
1307         VMSTATE_UINT8_ARRAY(tx_fifo, StrongARMUARTState, 8),
1308         VMSTATE_UINT8(tx_start, StrongARMUARTState),
1309         VMSTATE_UINT8(tx_len, StrongARMUARTState),
1310         VMSTATE_UINT16_ARRAY(rx_fifo, StrongARMUARTState, 12),
1311         VMSTATE_UINT8(rx_start, StrongARMUARTState),
1312         VMSTATE_UINT8(rx_len, StrongARMUARTState),
1313         VMSTATE_BOOL(wait_break_end, StrongARMUARTState),
1314         VMSTATE_END_OF_LIST(),
1315     },
1316 };
1317
1318 static Property strongarm_uart_properties[] = {
1319     DEFINE_PROP_CHR("chardev", StrongARMUARTState, chr),
1320     DEFINE_PROP_END_OF_LIST(),
1321 };
1322
1323 static void strongarm_uart_class_init(ObjectClass *klass, void *data)
1324 {
1325     DeviceClass *dc = DEVICE_CLASS(klass);
1326
1327     dc->desc = "StrongARM UART controller";
1328     dc->reset = strongarm_uart_reset;
1329     dc->vmsd = &vmstate_strongarm_uart_regs;
1330     dc->props = strongarm_uart_properties;
1331     dc->realize = strongarm_uart_realize;
1332 }
1333
1334 static const TypeInfo strongarm_uart_info = {
1335     .name          = TYPE_STRONGARM_UART,
1336     .parent        = TYPE_SYS_BUS_DEVICE,
1337     .instance_size = sizeof(StrongARMUARTState),
1338     .instance_init = strongarm_uart_init,
1339     .class_init    = strongarm_uart_class_init,
1340 };
1341
1342 /* Synchronous Serial Ports */
1343
1344 #define TYPE_STRONGARM_SSP "strongarm-ssp"
1345 #define STRONGARM_SSP(obj) \
1346     OBJECT_CHECK(StrongARMSSPState, (obj), TYPE_STRONGARM_SSP)
1347
1348 typedef struct StrongARMSSPState {
1349     SysBusDevice parent_obj;
1350
1351     MemoryRegion iomem;
1352     qemu_irq irq;
1353     SSIBus *bus;
1354
1355     uint16_t sscr[2];
1356     uint16_t sssr;
1357
1358     uint16_t rx_fifo[8];
1359     uint8_t rx_level;
1360     uint8_t rx_start;
1361 } StrongARMSSPState;
1362
1363 #define SSCR0 0x60 /* SSP Control register 0 */
1364 #define SSCR1 0x64 /* SSP Control register 1 */
1365 #define SSDR  0x6c /* SSP Data register */
1366 #define SSSR  0x74 /* SSP Status register */
1367
1368 /* Bitfields for above registers */
1369 #define SSCR0_SPI(x)    (((x) & 0x30) == 0x00)
1370 #define SSCR0_SSP(x)    (((x) & 0x30) == 0x10)
1371 #define SSCR0_UWIRE(x)  (((x) & 0x30) == 0x20)
1372 #define SSCR0_PSP(x)    (((x) & 0x30) == 0x30)
1373 #define SSCR0_SSE       (1 << 7)
1374 #define SSCR0_DSS(x)    (((x) & 0xf) + 1)
1375 #define SSCR1_RIE       (1 << 0)
1376 #define SSCR1_TIE       (1 << 1)
1377 #define SSCR1_LBM       (1 << 2)
1378 #define SSSR_TNF        (1 << 2)
1379 #define SSSR_RNE        (1 << 3)
1380 #define SSSR_TFS        (1 << 5)
1381 #define SSSR_RFS        (1 << 6)
1382 #define SSSR_ROR        (1 << 7)
1383 #define SSSR_RW         0x0080
1384
1385 static void strongarm_ssp_int_update(StrongARMSSPState *s)
1386 {
1387     int level = 0;
1388
1389     level |= (s->sssr & SSSR_ROR);
1390     level |= (s->sssr & SSSR_RFS)  &&  (s->sscr[1] & SSCR1_RIE);
1391     level |= (s->sssr & SSSR_TFS)  &&  (s->sscr[1] & SSCR1_TIE);
1392     qemu_set_irq(s->irq, level);
1393 }
1394
1395 static void strongarm_ssp_fifo_update(StrongARMSSPState *s)
1396 {
1397     s->sssr &= ~SSSR_TFS;
1398     s->sssr &= ~SSSR_TNF;
1399     if (s->sscr[0] & SSCR0_SSE) {
1400         if (s->rx_level >= 4) {
1401             s->sssr |= SSSR_RFS;
1402         } else {
1403             s->sssr &= ~SSSR_RFS;
1404         }
1405         if (s->rx_level) {
1406             s->sssr |= SSSR_RNE;
1407         } else {
1408             s->sssr &= ~SSSR_RNE;
1409         }
1410         /* TX FIFO is never filled, so it is always in underrun
1411            condition if SSP is enabled */
1412         s->sssr |= SSSR_TFS;
1413         s->sssr |= SSSR_TNF;
1414     }
1415
1416     strongarm_ssp_int_update(s);
1417 }
1418
1419 static uint64_t strongarm_ssp_read(void *opaque, hwaddr addr,
1420                                    unsigned size)
1421 {
1422     StrongARMSSPState *s = opaque;
1423     uint32_t retval;
1424
1425     switch (addr) {
1426     case SSCR0:
1427         return s->sscr[0];
1428     case SSCR1:
1429         return s->sscr[1];
1430     case SSSR:
1431         return s->sssr;
1432     case SSDR:
1433         if (~s->sscr[0] & SSCR0_SSE) {
1434             return 0xffffffff;
1435         }
1436         if (s->rx_level < 1) {
1437             printf("%s: SSP Rx Underrun\n", __func__);
1438             return 0xffffffff;
1439         }
1440         s->rx_level--;
1441         retval = s->rx_fifo[s->rx_start++];
1442         s->rx_start &= 0x7;
1443         strongarm_ssp_fifo_update(s);
1444         return retval;
1445     default:
1446         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
1447         break;
1448     }
1449     return 0;
1450 }
1451
1452 static void strongarm_ssp_write(void *opaque, hwaddr addr,
1453                                 uint64_t value, unsigned size)
1454 {
1455     StrongARMSSPState *s = opaque;
1456
1457     switch (addr) {
1458     case SSCR0:
1459         s->sscr[0] = value & 0xffbf;
1460         if ((s->sscr[0] & SSCR0_SSE) && SSCR0_DSS(value) < 4) {
1461             printf("%s: Wrong data size: %i bits\n", __func__,
1462                    (int)SSCR0_DSS(value));
1463         }
1464         if (!(value & SSCR0_SSE)) {
1465             s->sssr = 0;
1466             s->rx_level = 0;
1467         }
1468         strongarm_ssp_fifo_update(s);
1469         break;
1470
1471     case SSCR1:
1472         s->sscr[1] = value & 0x2f;
1473         if (value & SSCR1_LBM) {
1474             printf("%s: Attempt to use SSP LBM mode\n", __func__);
1475         }
1476         strongarm_ssp_fifo_update(s);
1477         break;
1478
1479     case SSSR:
1480         s->sssr &= ~(value & SSSR_RW);
1481         strongarm_ssp_int_update(s);
1482         break;
1483
1484     case SSDR:
1485         if (SSCR0_UWIRE(s->sscr[0])) {
1486             value &= 0xff;
1487         } else
1488             /* Note how 32bits overflow does no harm here */
1489             value &= (1 << SSCR0_DSS(s->sscr[0])) - 1;
1490
1491         /* Data goes from here to the Tx FIFO and is shifted out from
1492          * there directly to the slave, no need to buffer it.
1493          */
1494         if (s->sscr[0] & SSCR0_SSE) {
1495             uint32_t readval;
1496             if (s->sscr[1] & SSCR1_LBM) {
1497                 readval = value;
1498             } else {
1499                 readval = ssi_transfer(s->bus, value);
1500             }
1501
1502             if (s->rx_level < 0x08) {
1503                 s->rx_fifo[(s->rx_start + s->rx_level++) & 0x7] = readval;
1504             } else {
1505                 s->sssr |= SSSR_ROR;
1506             }
1507         }
1508         strongarm_ssp_fifo_update(s);
1509         break;
1510
1511     default:
1512         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
1513         break;
1514     }
1515 }
1516
1517 static const MemoryRegionOps strongarm_ssp_ops = {
1518     .read = strongarm_ssp_read,
1519     .write = strongarm_ssp_write,
1520     .endianness = DEVICE_NATIVE_ENDIAN,
1521 };
1522
1523 static int strongarm_ssp_post_load(void *opaque, int version_id)
1524 {
1525     StrongARMSSPState *s = opaque;
1526
1527     strongarm_ssp_fifo_update(s);
1528
1529     return 0;
1530 }
1531
1532 static void strongarm_ssp_init(Object *obj)
1533 {
1534     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
1535     DeviceState *dev = DEVICE(sbd);
1536     StrongARMSSPState *s = STRONGARM_SSP(dev);
1537
1538     sysbus_init_irq(sbd, &s->irq);
1539
1540     memory_region_init_io(&s->iomem, obj, &strongarm_ssp_ops, s,
1541                           "ssp", 0x1000);
1542     sysbus_init_mmio(sbd, &s->iomem);
1543
1544     s->bus = ssi_create_bus(dev, "ssi");
1545 }
1546
1547 static void strongarm_ssp_reset(DeviceState *dev)
1548 {
1549     StrongARMSSPState *s = STRONGARM_SSP(dev);
1550
1551     s->sssr = 0x03; /* 3 bit data, SPI, disabled */
1552     s->rx_start = 0;
1553     s->rx_level = 0;
1554 }
1555
1556 static const VMStateDescription vmstate_strongarm_ssp_regs = {
1557     .name = "strongarm-ssp",
1558     .version_id = 0,
1559     .minimum_version_id = 0,
1560     .post_load = strongarm_ssp_post_load,
1561     .fields = (VMStateField[]) {
1562         VMSTATE_UINT16_ARRAY(sscr, StrongARMSSPState, 2),
1563         VMSTATE_UINT16(sssr, StrongARMSSPState),
1564         VMSTATE_UINT16_ARRAY(rx_fifo, StrongARMSSPState, 8),
1565         VMSTATE_UINT8(rx_start, StrongARMSSPState),
1566         VMSTATE_UINT8(rx_level, StrongARMSSPState),
1567         VMSTATE_END_OF_LIST(),
1568     },
1569 };
1570
1571 static void strongarm_ssp_class_init(ObjectClass *klass, void *data)
1572 {
1573     DeviceClass *dc = DEVICE_CLASS(klass);
1574
1575     dc->desc = "StrongARM SSP controller";
1576     dc->reset = strongarm_ssp_reset;
1577     dc->vmsd = &vmstate_strongarm_ssp_regs;
1578 }
1579
1580 static const TypeInfo strongarm_ssp_info = {
1581     .name          = TYPE_STRONGARM_SSP,
1582     .parent        = TYPE_SYS_BUS_DEVICE,
1583     .instance_size = sizeof(StrongARMSSPState),
1584     .instance_init = strongarm_ssp_init,
1585     .class_init    = strongarm_ssp_class_init,
1586 };
1587
1588 /* Main CPU functions */
1589 StrongARMState *sa1110_init(const char *cpu_type)
1590 {
1591     StrongARMState *s;
1592     int i;
1593
1594     s = g_new0(StrongARMState, 1);
1595
1596     if (strncmp(cpu_type, "sa1110", 6)) {
1597         error_report("Machine requires a SA1110 processor.");
1598         exit(1);
1599     }
1600
1601     s->cpu = ARM_CPU(cpu_create(cpu_type));
1602
1603     s->pic = sysbus_create_varargs("strongarm_pic", 0x90050000,
1604                     qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ),
1605                     qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ),
1606                     NULL);
1607
1608     sysbus_create_varargs("pxa25x-timer", 0x90000000,
1609                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC0),
1610                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC1),
1611                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC2),
1612                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC3),
1613                     NULL);
1614
1615     sysbus_create_simple(TYPE_STRONGARM_RTC, 0x90010000,
1616                     qdev_get_gpio_in(s->pic, SA_PIC_RTC_ALARM));
1617
1618     s->gpio = strongarm_gpio_init(0x90040000, s->pic);
1619
1620     s->ppc = sysbus_create_varargs(TYPE_STRONGARM_PPC, 0x90060000, NULL);
1621
1622     for (i = 0; sa_serial[i].io_base; i++) {
1623         DeviceState *dev = qdev_create(NULL, TYPE_STRONGARM_UART);
1624         qdev_prop_set_chr(dev, "chardev", serial_hd(i));
1625         qdev_init_nofail(dev);
1626         sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0,
1627                 sa_serial[i].io_base);
1628         sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
1629                 qdev_get_gpio_in(s->pic, sa_serial[i].irq));
1630     }
1631
1632     s->ssp = sysbus_create_varargs(TYPE_STRONGARM_SSP, 0x80070000,
1633                 qdev_get_gpio_in(s->pic, SA_PIC_SSP), NULL);
1634     s->ssp_bus = (SSIBus *)qdev_get_child_bus(s->ssp, "ssi");
1635
1636     return s;
1637 }
1638
1639 static void strongarm_register_types(void)
1640 {
1641     type_register_static(&strongarm_pic_info);
1642     type_register_static(&strongarm_rtc_sysbus_info);
1643     type_register_static(&strongarm_gpio_info);
1644     type_register_static(&strongarm_ppc_info);
1645     type_register_static(&strongarm_uart_info);
1646     type_register_static(&strongarm_ssp_info);
1647 }
1648
1649 type_init(strongarm_register_types)