hw/ppc/sam460ex.c

   1 /*
   2  * QEMU aCube Sam460ex board emulation
   3  *
   4  * Copyright (c) 2012 François Revol
   5  * Copyright (c) 2016-2019 BALATON Zoltan
   6  *
   7  * This file is derived from hw/ppc440_bamboo.c,
   8  * the copyright for that material belongs to the original owners.
   9  *
  10  * This work is licensed under the GNU GPL license version 2 or later.
  11  *
  12  */
  13
  14 #include "qemu/osdep.h"
  15 #include "qemu/units.h"
  16 #include "qemu-common.h"
  17 #include "qemu/error-report.h"
  18 #include "qapi/error.h"
  19 #include "hw/hw.h"
  20 #include "hw/boards.h"
  21 #include "sysemu/kvm.h"
  22 #include "kvm_ppc.h"
  23 #include "sysemu/device_tree.h"
  24 #include "sysemu/block-backend.h"
  25 #include "hw/loader.h"
  26 #include "elf.h"
  27 #include "exec/address-spaces.h"
  28 #include "exec/memory.h"
  29 #include "ppc440.h"
  30 #include "ppc405.h"
  31 #include "hw/block/flash.h"
  32 #include "sysemu/sysemu.h"
  33 #include "sysemu/qtest.h"
  34 #include "hw/sysbus.h"
  35 #include "hw/char/serial.h"
  36 #include "hw/i2c/ppc4xx_i2c.h"
  37 #include "hw/i2c/smbus_eeprom.h"
  38 #include "hw/usb/hcd-ehci.h"
  39 #include "hw/ppc/fdt.h"
  40
  41 #include <libfdt.h>
  42
  43 #define BINARY_DEVICE_TREE_FILE "canyonlands.dtb"
  44 #define UBOOT_FILENAME "u-boot-sam460-20100605.bin"
  45 /* to extract the official U-Boot bin from the updater: */
  46 /* dd bs=1 skip=$(($(stat -c '%s' updater/updater-460) - 0x80000)) \
  47      if=updater/updater-460 of=u-boot-sam460-20100605.bin */
  48
  49 /* from Sam460 U-Boot include/configs/Sam460ex.h */
  50 #define FLASH_BASE             0xfff00000
  51 #define FLASH_BASE_H           0x4
  52 #define FLASH_SIZE             (1 * MiB)
  53 #define UBOOT_LOAD_BASE        0xfff80000
  54 #define UBOOT_SIZE             0x00080000
  55 #define UBOOT_ENTRY            0xfffffffc
  56
  57 /* from U-Boot */
  58 #define EPAPR_MAGIC           (0x45504150)
  59 #define KERNEL_ADDR           0x1000000
  60 #define FDT_ADDR              0x1800000
  61 #define RAMDISK_ADDR          0x1900000
  62
  63 /* Sam460ex IRQ MAP:
  64    IRQ0  = ETH_INT
  65    IRQ1  = FPGA_INT
  66    IRQ2  = PCI_INT (PCIA, PCIB, PCIC, PCIB)
  67    IRQ3  = FPGA_INT2
  68    IRQ11 = RTC_INT
  69    IRQ12 = SM502_INT
  70 */
  71
  72 #define CPU_FREQ 1150000000
  73 #define PLB_FREQ 230000000
  74 #define OPB_FREQ 115000000
  75 #define EBC_FREQ 115000000
  76 #define UART_FREQ 11059200
  77 #define SDRAM_NR_BANKS 4
  78
  79 /* The SoC could also handle 4 GiB but firmware does not work with that. */
  80 /* Maybe it overflows a signed 32 bit number somewhere? */
  81 static const ram_addr_t ppc460ex_sdram_bank_sizes[] = {
  82     2 * GiB, 1 * GiB, 512 * MiB, 256 * MiB, 128 * MiB, 64 * MiB,
  83     32 * MiB, 0
  84 };
  85
  86 struct boot_info {
  87     uint32_t dt_base;
  88     uint32_t dt_size;
  89     uint32_t entry;
  90 };
  91
  92 static int sam460ex_load_uboot(void)
  93 {
  94     /*
  95      * This first creates 1MiB of flash memory mapped at the end of
  96      * the 32-bit address space (0xFFF00000..0xFFFFFFFF).
  97      *
  98      * If_PFLASH unit 0 is defined, the flash memory is initialized
  99      * from that block backend.
 100      *
 101      * Else, it's initialized to zero.  And then 512KiB of ROM get
 102      * mapped on top of its second half (0xFFF80000..0xFFFFFFFF),
 103      * initialized from u-boot-sam460-20100605.bin.
 104      *
 105      * This doesn't smell right.
 106      *
 107      * The physical hardware appears to have 512KiB flash memory.
 108      *
 109      * TODO Figure out what we really need here, and clean this up.
 110      */
 111
 112     DriveInfo *dinfo;
 113
 114     dinfo = drive_get(IF_PFLASH, 0, 0);
 115     if (!pflash_cfi01_register(FLASH_BASE | ((hwaddr)FLASH_BASE_H << 32),
 116                                "sam460ex.flash", FLASH_SIZE,
 117                                dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
 118                                64 * KiB, 1, 0x89, 0x18, 0x0000, 0x0, 1)) {
 119         error_report("Error registering flash memory");
 120         /* XXX: return an error instead? */
 121         exit(1);
 122     }
 123
 124     if (!dinfo) {
 125         /*error_report("No flash image given with the 'pflash' parameter,"
 126                 " using default u-boot image");*/
 127         rom_add_file_fixed(UBOOT_FILENAME,
 128                            UBOOT_LOAD_BASE | ((hwaddr)FLASH_BASE_H << 32),
 129                            -1);
 130     }
 131
 132     return 0;
 133 }
 134
 135 static int sam460ex_load_device_tree(hwaddr addr,
 136                                      uint32_t ramsize,
 137                                      hwaddr initrd_base,
 138                                      hwaddr initrd_size,
 139                                      const char *kernel_cmdline)
 140 {
 141     uint32_t mem_reg_property[] = { 0, 0, cpu_to_be32(ramsize) };
 142     char *filename;
 143     int fdt_size;
 144     void *fdt;
 145     uint32_t tb_freq = CPU_FREQ;
 146     uint32_t clock_freq = CPU_FREQ;
 147     int offset;
 148
 149     filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE);
 150     if (!filename) {
 151         error_report("Couldn't find dtb file `%s'", BINARY_DEVICE_TREE_FILE);
 152         exit(1);
 153     }
 154     fdt = load_device_tree(filename, &fdt_size);
 155     if (!fdt) {
 156         error_report("Couldn't load dtb file `%s'", filename);
 157         g_free(filename);
 158         exit(1);
 159     }
 160     g_free(filename);
 161
 162     /* Manipulate device tree in memory. */
 163
 164     qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property,
 165                      sizeof(mem_reg_property));
 166
 167     /* default FDT doesn't have a /chosen node... */
 168     qemu_fdt_add_subnode(fdt, "/chosen");
 169
 170     qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", initrd_base);
 171
 172     qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end",
 173                           (initrd_base + initrd_size));
 174
 175     qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", kernel_cmdline);
 176
 177     /* Copy data from the host device tree into the guest. Since the guest can
 178      * directly access the timebase without host involvement, we must expose
 179      * the correct frequencies. */
 180     if (kvm_enabled()) {
 181         tb_freq = kvmppc_get_tbfreq();
 182         clock_freq = kvmppc_get_clockfreq();
 183     }
 184
 185     qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "clock-frequency",
 186                               clock_freq);
 187     qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "timebase-frequency",
 188                               tb_freq);
 189
 190     /* Remove cpm node if it exists (it is not emulated) */
 191     offset = fdt_path_offset(fdt, "/cpm");
 192     if (offset >= 0) {
 193         _FDT(fdt_nop_node(fdt, offset));
 194     }
 195
 196     /* set serial port clocks */
 197     offset = fdt_node_offset_by_compatible(fdt, -1, "ns16550");
 198     while (offset >= 0) {
 199         _FDT(fdt_setprop_cell(fdt, offset, "clock-frequency", UART_FREQ));
 200         offset = fdt_node_offset_by_compatible(fdt, offset, "ns16550");
 201     }
 202
 203     /* some more clocks */
 204     qemu_fdt_setprop_cell(fdt, "/plb", "clock-frequency",
 205                               PLB_FREQ);
 206     qemu_fdt_setprop_cell(fdt, "/plb/opb", "clock-frequency",
 207                               OPB_FREQ);
 208     qemu_fdt_setprop_cell(fdt, "/plb/opb/ebc", "clock-frequency",
 209                               EBC_FREQ);
 210
 211     rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr);
 212     g_free(fdt);
 213
 214     return fdt_size;
 215 }
 216
 217 /* Create reset TLB entries for BookE, mapping only the flash memory.  */
 218 static void mmubooke_create_initial_mapping_uboot(CPUPPCState *env)
 219 {
 220     ppcemb_tlb_t *tlb = &env->tlb.tlbe[0];
 221
 222     /* on reset the flash is mapped by a shadow TLB,
 223      * but since we don't implement them we need to use
 224      * the same values U-Boot will use to avoid a fault.
 225      */
 226     tlb->attr = 0;
 227     tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
 228     tlb->size = 0x10000000; /* up to 0xffffffff  */
 229     tlb->EPN = 0xf0000000 & TARGET_PAGE_MASK;
 230     tlb->RPN = (0xf0000000 & TARGET_PAGE_MASK) | 0x4;
 231     tlb->PID = 0;
 232 }
 233
 234 /* Create reset TLB entries for BookE, spanning the 32bit addr space.  */
 235 static void mmubooke_create_initial_mapping(CPUPPCState *env,
 236                                      target_ulong va,
 237                                      hwaddr pa)
 238 {
 239     ppcemb_tlb_t *tlb = &env->tlb.tlbe[0];
 240
 241     tlb->attr = 0;
 242     tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
 243     tlb->size = 1 << 31; /* up to 0x80000000  */
 244     tlb->EPN = va & TARGET_PAGE_MASK;
 245     tlb->RPN = pa & TARGET_PAGE_MASK;
 246     tlb->PID = 0;
 247 }
 248
 249 static void main_cpu_reset(void *opaque)
 250 {
 251     PowerPCCPU *cpu = opaque;
 252     CPUPPCState *env = &cpu->env;
 253     struct boot_info *bi = env->load_info;
 254
 255     cpu_reset(CPU(cpu));
 256
 257     /* either we have a kernel to boot or we jump to U-Boot */
 258     if (bi->entry != UBOOT_ENTRY) {
 259         env->gpr[1] = (16 * MiB) - 8;
 260         env->gpr[3] = FDT_ADDR;
 261         env->nip = bi->entry;
 262
 263         /* Create a mapping for the kernel.  */
 264         mmubooke_create_initial_mapping(env, 0, 0);
 265         env->gpr[6] = tswap32(EPAPR_MAGIC);
 266         env->gpr[7] = (16 * MiB) - 8; /* bi->ima_size; */
 267
 268     } else {
 269         env->nip = UBOOT_ENTRY;
 270         mmubooke_create_initial_mapping_uboot(env);
 271     }
 272 }
 273
 274 static void sam460ex_init(MachineState *machine)
 275 {
 276     MemoryRegion *address_space_mem = get_system_memory();
 277     MemoryRegion *isa = g_new(MemoryRegion, 1);
 278     MemoryRegion *ram_memories = g_new(MemoryRegion, SDRAM_NR_BANKS);
 279     hwaddr ram_bases[SDRAM_NR_BANKS] = {0};
 280     hwaddr ram_sizes[SDRAM_NR_BANKS] = {0};
 281     MemoryRegion *l2cache_ram = g_new(MemoryRegion, 1);
 282     qemu_irq *irqs, *uic[4];
 283     PCIBus *pci_bus;
 284     PowerPCCPU *cpu;
 285     CPUPPCState *env;
 286     I2CBus *i2c;
 287     hwaddr entry = UBOOT_ENTRY;
 288     hwaddr loadaddr = LOAD_UIMAGE_LOADADDR_INVALID;
 289     target_long initrd_size = 0;
 290     DeviceState *dev;
 291     SysBusDevice *sbdev;
 292     struct boot_info *boot_info;
 293     uint8_t *spd_data;
 294     Error *err = NULL;
 295     int success;
 296
 297     cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
 298     env = &cpu->env;
 299     if (env->mmu_model != POWERPC_MMU_BOOKE) {
 300         error_report("Only MMU model BookE is supported by this machine.");
 301         exit(1);
 302     }
 303
 304     qemu_register_reset(main_cpu_reset, cpu);
 305     boot_info = g_malloc0(sizeof(*boot_info));
 306     env->load_info = boot_info;
 307
 308     ppc_booke_timers_init(cpu, CPU_FREQ, 0);
 309     ppc_dcr_init(env, NULL, NULL);
 310
 311     /* PLB arbitrer */
 312     ppc4xx_plb_init(env);
 313
 314     /* interrupt controllers */
 315     irqs = g_new0(qemu_irq, PPCUIC_OUTPUT_NB);
 316     irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT];
 317     irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT];
 318     uic[0] = ppcuic_init(env, irqs, 0xc0, 0, 1);
 319     uic[1] = ppcuic_init(env, &uic[0][30], 0xd0, 0, 1);
 320     uic[2] = ppcuic_init(env, &uic[0][10], 0xe0, 0, 1);
 321     uic[3] = ppcuic_init(env, &uic[0][16], 0xf0, 0, 1);
 322
 323     /* SDRAM controller */
 324     /* put all RAM on first bank because board has one slot
 325      * and firmware only checks that */
 326     machine->ram_size = ppc4xx_sdram_adjust(machine->ram_size, 1,
 327                                    ram_memories, ram_bases, ram_sizes,
 328                                    ppc460ex_sdram_bank_sizes);
 329
 330     /* FIXME: does 460EX have ECC interrupts? */
 331     ppc440_sdram_init(env, SDRAM_NR_BANKS, ram_memories,
 332                       ram_bases, ram_sizes, 1);
 333
 334     /* IIC controllers and devices */
 335     dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600700, uic[0][2]);
 336     i2c = PPC4xx_I2C(dev)->bus;
 337     /* SPD EEPROM on RAM module */
 338     spd_data = spd_data_generate(DDR2, ram_sizes[0], &err);
 339     if (err) {
 340         warn_report_err(err);
 341     }
 342     if (spd_data) {
 343         spd_data[20] = 4; /* SO-DIMM module */
 344         smbus_eeprom_init_one(i2c, 0x50, spd_data);
 345     }
 346     /* RTC */
 347     i2c_create_slave(i2c, "m41t80", 0x68);
 348
 349     dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600800, uic[0][3]);
 350
 351     /* External bus controller */
 352     ppc405_ebc_init(env);
 353
 354     /* CPR */
 355     ppc4xx_cpr_init(env);
 356
 357     /* PLB to AHB bridge */
 358     ppc4xx_ahb_init(env);
 359
 360     /* System DCRs */
 361     ppc4xx_sdr_init(env);
 362
 363     /* MAL */
 364     ppc4xx_mal_init(env, 4, 16, &uic[2][3]);
 365
 366     /* DMA */
 367     ppc4xx_dma_init(env, 0x200);
 368
 369     /* 256K of L2 cache as memory */
 370     ppc4xx_l2sram_init(env);
 371     /* FIXME: remove this after fixing l2sram mapping in ppc440_uc.c? */
 372     memory_region_init_ram(l2cache_ram, NULL, "ppc440.l2cache_ram", 256 * KiB,
 373                            &error_abort);
 374     memory_region_add_subregion(address_space_mem, 0x400000000LL, l2cache_ram);
 375
 376     /* USB */
 377     sysbus_create_simple(TYPE_PPC4xx_EHCI, 0x4bffd0400, uic[2][29]);
 378     dev = qdev_create(NULL, "sysbus-ohci");
 379     qdev_prop_set_string(dev, "masterbus", "usb-bus.0");
 380     qdev_prop_set_uint32(dev, "num-ports", 6);
 381     qdev_init_nofail(dev);
 382     sbdev = SYS_BUS_DEVICE(dev);
 383     sysbus_mmio_map(sbdev, 0, 0x4bffd0000);
 384     sysbus_connect_irq(sbdev, 0, uic[2][30]);
 385     usb_create_simple(usb_bus_find(-1), "usb-kbd");
 386     usb_create_simple(usb_bus_find(-1), "usb-mouse");
 387
 388     /* PCI bus */
 389     ppc460ex_pcie_init(env);
 390     /* All PCI irqs are connected to the same UIC pin (cf. UBoot source) */
 391     dev = sysbus_create_simple("ppc440-pcix-host", 0xc0ec00000, uic[1][0]);
 392     pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
 393     if (!pci_bus) {
 394         error_report("couldn't create PCI controller!");
 395         exit(1);
 396     }
 397     memory_region_init_alias(isa, NULL, "isa_mmio", get_system_io(),
 398                              0, 0x10000);
 399     memory_region_add_subregion(get_system_memory(), 0xc08000000, isa);
 400
 401     /* PCI devices */
 402     pci_create_simple(pci_bus, PCI_DEVFN(6, 0), "sm501");
 403     /* SoC has a single SATA port but we don't emulate that yet
 404      * However, firmware and usual clients have driver for SiI311x
 405      * so add one for convenience by default */
 406     if (defaults_enabled()) {
 407         pci_create_simple(pci_bus, -1, "sii3112");
 408     }
 409
 410     /* SoC has 4 UARTs
 411      * but board has only one wired and two are present in fdt */
 412     if (serial_hd(0) != NULL) {
 413         serial_mm_init(address_space_mem, 0x4ef600300, 0, uic[1][1],
 414                        PPC_SERIAL_MM_BAUDBASE, serial_hd(0),
 415                        DEVICE_BIG_ENDIAN);
 416     }
 417     if (serial_hd(1) != NULL) {
 418         serial_mm_init(address_space_mem, 0x4ef600400, 0, uic[0][1],
 419                        PPC_SERIAL_MM_BAUDBASE, serial_hd(1),
 420                        DEVICE_BIG_ENDIAN);
 421     }
 422
 423     /* Load U-Boot image. */
 424     if (!machine->kernel_filename) {
 425         success = sam460ex_load_uboot();
 426         if (success < 0) {
 427             error_report("could not load firmware");
 428             exit(1);
 429         }
 430     }
 431
 432     /* Load kernel. */
 433     if (machine->kernel_filename) {
 434         success = load_uimage(machine->kernel_filename, &entry, &loadaddr,
 435                               NULL, NULL, NULL);
 436         if (success < 0) {
 437             uint64_t elf_entry, elf_lowaddr;
 438
 439             success = load_elf(machine->kernel_filename, NULL,
 440                                NULL, NULL, &elf_entry,
 441                                &elf_lowaddr, NULL, 1, PPC_ELF_MACHINE, 0, 0);
 442             entry = elf_entry;
 443             loadaddr = elf_lowaddr;
 444         }
 445         /* XXX try again as binary */
 446         if (success < 0) {
 447             error_report("could not load kernel '%s'",
 448                     machine->kernel_filename);
 449             exit(1);
 450         }
 451     }
 452
 453     /* Load initrd. */
 454     if (machine->initrd_filename) {
 455         initrd_size = load_image_targphys(machine->initrd_filename,
 456                                           RAMDISK_ADDR,
 457                                           machine->ram_size - RAMDISK_ADDR);
 458         if (initrd_size < 0) {
 459             error_report("could not load ram disk '%s' at %x",
 460                     machine->initrd_filename, RAMDISK_ADDR);
 461             exit(1);
 462         }
 463     }
 464
 465     /* If we're loading a kernel directly, we must load the device tree too. */
 466     if (machine->kernel_filename) {
 467         int dt_size;
 468
 469         dt_size = sam460ex_load_device_tree(FDT_ADDR, machine->ram_size,
 470                                     RAMDISK_ADDR, initrd_size,
 471                                     machine->kernel_cmdline);
 472
 473         boot_info->dt_base = FDT_ADDR;
 474         boot_info->dt_size = dt_size;
 475     }
 476
 477     boot_info->entry = entry;
 478 }
 479
 480 static void sam460ex_machine_init(MachineClass *mc)
 481 {
 482     mc->desc = "aCube Sam460ex";
 483     mc->init = sam460ex_init;
 484     mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("460exb");
 485     mc->default_ram_size = 512 * MiB;
 486 }
 487
 488 DEFINE_MACHINE("sam460ex", sam460ex_machine_init)