dump: allow target to set the page size
[qemu/ar7.git] / hw / cpu / a15mpcore.c
blob94e8cc1a66a7674f10834c65b11919e26c86ab26
1 /*
2 * Cortex-A15MPCore internal peripheral emulation.
4 * Copyright (c) 2012 Linaro Limited.
5 * Written by Peter Maydell.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, see <http://www.gnu.org/licenses/>.
21 #include "hw/cpu/a15mpcore.h"
22 #include "sysemu/kvm.h"
23 #include "kvm_arm.h"
25 static void a15mp_priv_set_irq(void *opaque, int irq, int level)
27 A15MPPrivState *s = (A15MPPrivState *)opaque;
29 qemu_set_irq(qdev_get_gpio_in(DEVICE(&s->gic), irq), level);
32 static void a15mp_priv_initfn(Object *obj)
34 SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
35 A15MPPrivState *s = A15MPCORE_PRIV(obj);
36 DeviceState *gicdev;
38 memory_region_init(&s->container, obj, "a15mp-priv-container", 0x8000);
39 sysbus_init_mmio(sbd, &s->container);
41 object_initialize(&s->gic, sizeof(s->gic), gic_class_name());
42 gicdev = DEVICE(&s->gic);
43 qdev_set_parent_bus(gicdev, sysbus_get_default());
44 qdev_prop_set_uint32(gicdev, "revision", 2);
47 static void a15mp_priv_realize(DeviceState *dev, Error **errp)
49 SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
50 A15MPPrivState *s = A15MPCORE_PRIV(dev);
51 DeviceState *gicdev;
52 SysBusDevice *busdev;
53 int i;
54 Error *err = NULL;
55 bool has_el3;
56 Object *cpuobj;
58 gicdev = DEVICE(&s->gic);
59 qdev_prop_set_uint32(gicdev, "num-cpu", s->num_cpu);
60 qdev_prop_set_uint32(gicdev, "num-irq", s->num_irq);
62 if (!kvm_irqchip_in_kernel()) {
63 /* Make the GIC's TZ support match the CPUs. We assume that
64 * either all the CPUs have TZ, or none do.
66 cpuobj = OBJECT(qemu_get_cpu(0));
67 has_el3 = object_property_find(cpuobj, "has_el3", NULL) &&
68 object_property_get_bool(cpuobj, "has_el3", &error_abort);
69 qdev_prop_set_bit(gicdev, "has-security-extensions", has_el3);
72 object_property_set_bool(OBJECT(&s->gic), true, "realized", &err);
73 if (err != NULL) {
74 error_propagate(errp, err);
75 return;
77 busdev = SYS_BUS_DEVICE(&s->gic);
79 /* Pass through outbound IRQ lines from the GIC */
80 sysbus_pass_irq(sbd, busdev);
82 /* Pass through inbound GPIO lines to the GIC */
83 qdev_init_gpio_in(dev, a15mp_priv_set_irq, s->num_irq - 32);
85 /* Wire the outputs from each CPU's generic timer to the
86 * appropriate GIC PPI inputs
88 for (i = 0; i < s->num_cpu; i++) {
89 DeviceState *cpudev = DEVICE(qemu_get_cpu(i));
90 int ppibase = s->num_irq - 32 + i * 32;
91 int irq;
92 /* Mapping from the output timer irq lines from the CPU to the
93 * GIC PPI inputs used on the A15:
95 const int timer_irq[] = {
96 [GTIMER_PHYS] = 30,
97 [GTIMER_VIRT] = 27,
98 [GTIMER_HYP] = 26,
99 [GTIMER_SEC] = 29,
101 for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) {
102 qdev_connect_gpio_out(cpudev, irq,
103 qdev_get_gpio_in(gicdev,
104 ppibase + timer_irq[irq]));
108 /* Memory map (addresses are offsets from PERIPHBASE):
109 * 0x0000-0x0fff -- reserved
110 * 0x1000-0x1fff -- GIC Distributor
111 * 0x2000-0x2fff -- GIC CPU interface
112 * 0x4000-0x4fff -- GIC virtual interface control (not modelled)
113 * 0x5000-0x5fff -- GIC virtual interface control (not modelled)
114 * 0x6000-0x7fff -- GIC virtual CPU interface (not modelled)
116 memory_region_add_subregion(&s->container, 0x1000,
117 sysbus_mmio_get_region(busdev, 0));
118 memory_region_add_subregion(&s->container, 0x2000,
119 sysbus_mmio_get_region(busdev, 1));
122 static Property a15mp_priv_properties[] = {
123 DEFINE_PROP_UINT32("num-cpu", A15MPPrivState, num_cpu, 1),
124 /* The Cortex-A15MP may have anything from 0 to 224 external interrupt
125 * IRQ lines (with another 32 internal). We default to 128+32, which
126 * is the number provided by the Cortex-A15MP test chip in the
127 * Versatile Express A15 development board.
128 * Other boards may differ and should set this property appropriately.
130 DEFINE_PROP_UINT32("num-irq", A15MPPrivState, num_irq, 160),
131 DEFINE_PROP_END_OF_LIST(),
134 static void a15mp_priv_class_init(ObjectClass *klass, void *data)
136 DeviceClass *dc = DEVICE_CLASS(klass);
138 dc->realize = a15mp_priv_realize;
139 dc->props = a15mp_priv_properties;
140 /* We currently have no savable state */
143 static const TypeInfo a15mp_priv_info = {
144 .name = TYPE_A15MPCORE_PRIV,
145 .parent = TYPE_SYS_BUS_DEVICE,
146 .instance_size = sizeof(A15MPPrivState),
147 .instance_init = a15mp_priv_initfn,
148 .class_init = a15mp_priv_class_init,
151 static void a15mp_register_types(void)
153 type_register_static(&a15mp_priv_info);
156 type_init(a15mp_register_types)