include/hw/sd/sdhci.h

   1 /*
   2  * SD Association Host Standard Specification v2.0 controller emulation
   3  *
   4  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
   5  * Mitsyanko Igor <i.mitsyanko@samsung.com>
   6  * Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com>
   7  *
   8  * Based on MMC controller for Samsung S5PC1xx-based board emulation
   9  * by Alexey Merkulov and Vladimir Monakhov.
  10  *
  11  * This program is free software; you can redistribute it and/or modify it
  12  * under the terms of the GNU General Public License as published by the
  13  * Free Software Foundation; either version 2 of the License, or (at your
  14  * option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  19  * See the GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU _General Public License along
  22  * with this program; if not, see <http://www.gnu.org/licenses/>.
  23  */
  24
  25 #ifndef SDHCI_H
  26 #define SDHCI_H
  27
  28 #include "qemu-common.h"
  29 #include "hw/block/block.h"
  30 #include "hw/pci/pci.h"
  31 #include "hw/sysbus.h"
  32 #include "hw/sd/sd.h"
  33
  34 /* SD/MMC host controller state */
  35 typedef struct SDHCIState {
  36     union {
  37         PCIDevice pcidev;
  38         SysBusDevice busdev;
  39     };
  40     SDState *card;
  41     MemoryRegion iomem;
  42     BlockBackend *blk;
  43
  44     QEMUTimer *insert_timer;       /* timer for 'changing' sd card. */
  45     QEMUTimer *transfer_timer;
  46     qemu_irq eject_cb;
  47     qemu_irq ro_cb;
  48     qemu_irq irq;
  49
  50     uint32_t sdmasysad;    /* SDMA System Address register */
  51     uint16_t blksize;      /* Host DMA Buff Boundary and Transfer BlkSize Reg */
  52     uint16_t blkcnt;       /* Blocks count for current transfer */
  53     uint32_t argument;     /* Command Argument Register */
  54     uint16_t trnmod;       /* Transfer Mode Setting Register */
  55     uint16_t cmdreg;       /* Command Register */
  56     uint32_t rspreg[4];    /* Response Registers 0-3 */
  57     uint32_t prnsts;       /* Present State Register */
  58     uint8_t  hostctl;      /* Host Control Register */
  59     uint8_t  pwrcon;       /* Power control Register */
  60     uint8_t  blkgap;       /* Block Gap Control Register */
  61     uint8_t  wakcon;       /* WakeUp Control Register */
  62     uint16_t clkcon;       /* Clock control Register */
  63     uint8_t  timeoutcon;   /* Timeout Control Register */
  64     uint8_t  admaerr;      /* ADMA Error Status Register */
  65     uint16_t norintsts;    /* Normal Interrupt Status Register */
  66     uint16_t errintsts;    /* Error Interrupt Status Register */
  67     uint16_t norintstsen;  /* Normal Interrupt Status Enable Register */
  68     uint16_t errintstsen;  /* Error Interrupt Status Enable Register */
  69     uint16_t norintsigen;  /* Normal Interrupt Signal Enable Register */
  70     uint16_t errintsigen;  /* Error Interrupt Signal Enable Register */
  71     uint16_t acmd12errsts; /* Auto CMD12 error status register */
  72     uint64_t admasysaddr;  /* ADMA System Address Register */
  73
  74     uint32_t capareg;      /* Capabilities Register */
  75     uint32_t maxcurr;      /* Maximum Current Capabilities Register */
  76     uint8_t  *fifo_buffer; /* SD host i/o FIFO buffer */
  77     uint32_t buf_maxsz;
  78     uint16_t data_count;   /* current element in FIFO buffer */
  79     uint8_t  stopped_state;/* Current SDHC state */
  80     bool     noeject_quirk;/* Quirk to disable card insert/remove interrupts */
  81     /* Buffer Data Port Register - virtual access point to R and W buffers */
  82     /* Software Reset Register - always reads as 0 */
  83     /* Force Event Auto CMD12 Error Interrupt Reg - write only */
  84     /* Force Event Error Interrupt Register- write only */
  85     /* RO Host Controller Version Register always reads as 0x2401 */
  86 } SDHCIState;
  87
  88 #define TYPE_PCI_SDHCI "sdhci-pci"
  89 #define PCI_SDHCI(obj) OBJECT_CHECK(SDHCIState, (obj), TYPE_PCI_SDHCI)
  90
  91 #define TYPE_SYSBUS_SDHCI "generic-sdhci"
  92 #define SYSBUS_SDHCI(obj)                               \
  93      OBJECT_CHECK(SDHCIState, (obj), TYPE_SYSBUS_SDHCI)
  94
  95 #endif /* SDHCI_H */