hw/char/parallel.c

   1 /*
   2  * QEMU Parallel PORT emulation
   3  *
   4  * Copyright (c) 2003-2005 Fabrice Bellard
   5  * Copyright (c) 2007 Marko Kohtala
   6  *
   7  * Permission is hereby granted, free of charge, to any person obtaining a copy
   8  * of this software and associated documentation files (the "Software"), to deal
   9  * in the Software without restriction, including without limitation the rights
  10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  11  * copies of the Software, and to permit persons to whom the Software is
  12  * furnished to do so, subject to the following conditions:
  13  *
  14  * The above copyright notice and this permission notice shall be included in
  15  * all copies or substantial portions of the Software.
  16  *
  17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  23  * THE SOFTWARE.
  24  */
  25
  26 #include "qemu/osdep.h"
  27 #include "qapi/error.h"
  28 #include "qemu/module.h"
  29 #include "chardev/char-parallel.h"
  30 #include "chardev/char-fe.h"
  31 #include "hw/acpi/aml-build.h"
  32 #include "hw/irq.h"
  33 #include "hw/isa/isa.h"
  34 #include "hw/qdev-properties.h"
  35 #include "migration/vmstate.h"
  36 #include "hw/char/parallel.h"
  37 #include "sysemu/reset.h"
  38 #include "sysemu/sysemu.h"
  39 #include "trace.h"
  40
  41 //#define DEBUG_PARALLEL
  42
  43 #ifdef DEBUG_PARALLEL
  44 #define pdebug(fmt, ...) printf("pp: " fmt, ## __VA_ARGS__)
  45 #else
  46 #define pdebug(fmt, ...) ((void)0)
  47 #endif
  48
  49 #define PARA_REG_DATA 0
  50 #define PARA_REG_STS 1
  51 #define PARA_REG_CTR 2
  52 #define PARA_REG_EPP_ADDR 3
  53 #define PARA_REG_EPP_DATA 4
  54
  55 /*
  56  * These are the definitions for the Printer Status Register
  57  */
  58 #define PARA_STS_BUSY   0x80    /* Busy complement */
  59 #define PARA_STS_ACK    0x40    /* Acknowledge */
  60 #define PARA_STS_PAPER  0x20    /* Out of paper */
  61 #define PARA_STS_ONLINE 0x10    /* Online */
  62 #define PARA_STS_ERROR  0x08    /* Error complement */
  63 #define PARA_STS_TMOUT  0x01    /* EPP timeout */
  64
  65 /*
  66  * These are the definitions for the Printer Control Register
  67  */
  68 #define PARA_CTR_DIR    0x20    /* Direction (1=read, 0=write) */
  69 #define PARA_CTR_INTEN  0x10    /* IRQ Enable */
  70 #define PARA_CTR_SELECT 0x08    /* Select In complement */
  71 #define PARA_CTR_INIT   0x04    /* Initialize Printer complement */
  72 #define PARA_CTR_AUTOLF 0x02    /* Auto linefeed complement */
  73 #define PARA_CTR_STROBE 0x01    /* Strobe complement */
  74
  75 #define PARA_CTR_SIGNAL (PARA_CTR_SELECT|PARA_CTR_INIT|PARA_CTR_AUTOLF|PARA_CTR_STROBE)
  76
  77 typedef struct ParallelState {
  78     MemoryRegion iomem;
  79     uint8_t dataw;
  80     uint8_t datar;
  81     uint8_t status;
  82     uint8_t control;
  83     qemu_irq irq;
  84     int irq_pending;
  85     CharBackend chr;
  86     int hw_driver;
  87     int epp_timeout;
  88     uint32_t last_read_offset; /* For debugging */
  89     /* Memory-mapped interface */
  90     int it_shift;
  91     PortioList portio_list;
  92 } ParallelState;
  93
  94 #define TYPE_ISA_PARALLEL "isa-parallel"
  95 #define ISA_PARALLEL(obj) \
  96     OBJECT_CHECK(ISAParallelState, (obj), TYPE_ISA_PARALLEL)
  97
  98 typedef struct ISAParallelState {
  99     ISADevice parent_obj;
 100
 101     uint32_t index;
 102     uint32_t iobase;
 103     uint32_t isairq;
 104     ParallelState state;
 105 } ISAParallelState;
 106
 107 static void parallel_update_irq(ParallelState *s)
 108 {
 109     if (s->irq_pending)
 110         qemu_irq_raise(s->irq);
 111     else
 112         qemu_irq_lower(s->irq);
 113 }
 114
 115 static void
 116 parallel_ioport_write_sw(void *opaque, uint32_t addr, uint32_t val)
 117 {
 118     ParallelState *s = opaque;
 119
 120     addr &= 7;
 121     trace_parallel_ioport_write("SW", addr, val);
 122     switch(addr) {
 123     case PARA_REG_DATA:
 124         s->dataw = val;
 125         parallel_update_irq(s);
 126         break;
 127     case PARA_REG_CTR:
 128         val |= 0xc0;
 129         if ((val & PARA_CTR_INIT) == 0 ) {
 130             s->status = PARA_STS_BUSY;
 131             s->status |= PARA_STS_ACK;
 132             s->status |= PARA_STS_ONLINE;
 133             s->status |= PARA_STS_ERROR;
 134         }
 135         else if (val & PARA_CTR_SELECT) {
 136             if (val & PARA_CTR_STROBE) {
 137                 s->status &= ~PARA_STS_BUSY;
 138                 if ((s->control & PARA_CTR_STROBE) == 0)
 139                     /* XXX this blocks entire thread. Rewrite to use
 140                      * qemu_chr_fe_write and background I/O callbacks */
 141                     qemu_chr_fe_write_all(&s->chr, &s->dataw, 1);
 142             } else {
 143                 if (s->control & PARA_CTR_INTEN) {
 144                     s->irq_pending = 1;
 145                 }
 146             }
 147         }
 148         parallel_update_irq(s);
 149         s->control = val;
 150         break;
 151     }
 152 }
 153
 154 static void parallel_ioport_write_hw(void *opaque, uint32_t addr, uint32_t val)
 155 {
 156     ParallelState *s = opaque;
 157     uint8_t parm = val;
 158     int dir;
 159
 160     /* Sometimes programs do several writes for timing purposes on old
 161        HW. Take care not to waste time on writes that do nothing. */
 162
 163     s->last_read_offset = ~0U;
 164
 165     addr &= 7;
 166     trace_parallel_ioport_write("HW", addr, val);
 167     switch(addr) {
 168     case PARA_REG_DATA:
 169         if (s->dataw == val)
 170             return;
 171         pdebug("wd%02x\n", val);
 172         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_WRITE_DATA, &parm);
 173         s->dataw = val;
 174         break;
 175     case PARA_REG_STS:
 176         pdebug("ws%02x\n", val);
 177         if (val & PARA_STS_TMOUT)
 178             s->epp_timeout = 0;
 179         break;
 180     case PARA_REG_CTR:
 181         val |= 0xc0;
 182         if (s->control == val)
 183             return;
 184         pdebug("wc%02x\n", val);
 185
 186         if ((val & PARA_CTR_DIR) != (s->control & PARA_CTR_DIR)) {
 187             if (val & PARA_CTR_DIR) {
 188                 dir = 1;
 189             } else {
 190                 dir = 0;
 191             }
 192             qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_DATA_DIR, &dir);
 193             parm &= ~PARA_CTR_DIR;
 194         }
 195
 196         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_WRITE_CONTROL, &parm);
 197         s->control = val;
 198         break;
 199     case PARA_REG_EPP_ADDR:
 200         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
 201             /* Controls not correct for EPP address cycle, so do nothing */
 202             pdebug("wa%02x s\n", val);
 203         else {
 204             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
 205             if (qemu_chr_fe_ioctl(&s->chr,
 206                                   CHR_IOCTL_PP_EPP_WRITE_ADDR, &ioarg)) {
 207                 s->epp_timeout = 1;
 208                 pdebug("wa%02x t\n", val);
 209             }
 210             else
 211                 pdebug("wa%02x\n", val);
 212         }
 213         break;
 214     case PARA_REG_EPP_DATA:
 215         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
 216             /* Controls not correct for EPP data cycle, so do nothing */
 217             pdebug("we%02x s\n", val);
 218         else {
 219             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
 220             if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg)) {
 221                 s->epp_timeout = 1;
 222                 pdebug("we%02x t\n", val);
 223             }
 224             else
 225                 pdebug("we%02x\n", val);
 226         }
 227         break;
 228     }
 229 }
 230
 231 static void
 232 parallel_ioport_eppdata_write_hw2(void *opaque, uint32_t addr, uint32_t val)
 233 {
 234     ParallelState *s = opaque;
 235     uint16_t eppdata = cpu_to_le16(val);
 236     int err;
 237     struct ParallelIOArg ioarg = {
 238         .buffer = &eppdata, .count = sizeof(eppdata)
 239     };
 240
 241     trace_parallel_ioport_write("EPP", addr, val);
 242     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
 243         /* Controls not correct for EPP data cycle, so do nothing */
 244         pdebug("we%04x s\n", val);
 245         return;
 246     }
 247     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
 248     if (err) {
 249         s->epp_timeout = 1;
 250         pdebug("we%04x t\n", val);
 251     }
 252     else
 253         pdebug("we%04x\n", val);
 254 }
 255
 256 static void
 257 parallel_ioport_eppdata_write_hw4(void *opaque, uint32_t addr, uint32_t val)
 258 {
 259     ParallelState *s = opaque;
 260     uint32_t eppdata = cpu_to_le32(val);
 261     int err;
 262     struct ParallelIOArg ioarg = {
 263         .buffer = &eppdata, .count = sizeof(eppdata)
 264     };
 265
 266     trace_parallel_ioport_write("EPP", addr, val);
 267     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
 268         /* Controls not correct for EPP data cycle, so do nothing */
 269         pdebug("we%08x s\n", val);
 270         return;
 271     }
 272     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
 273     if (err) {
 274         s->epp_timeout = 1;
 275         pdebug("we%08x t\n", val);
 276     }
 277     else
 278         pdebug("we%08x\n", val);
 279 }
 280
 281 static uint32_t parallel_ioport_read_sw(void *opaque, uint32_t addr)
 282 {
 283     ParallelState *s = opaque;
 284     uint32_t ret = 0xff;
 285
 286     addr &= 7;
 287     switch(addr) {
 288     case PARA_REG_DATA:
 289         if (s->control & PARA_CTR_DIR)
 290             ret = s->datar;
 291         else
 292             ret = s->dataw;
 293         break;
 294     case PARA_REG_STS:
 295         ret = s->status;
 296         s->irq_pending = 0;
 297         if ((s->status & PARA_STS_BUSY) == 0 && (s->control & PARA_CTR_STROBE) == 0) {
 298             /* XXX Fixme: wait 5 microseconds */
 299             if (s->status & PARA_STS_ACK)
 300                 s->status &= ~PARA_STS_ACK;
 301             else {
 302                 /* XXX Fixme: wait 5 microseconds */
 303                 s->status |= PARA_STS_ACK;
 304                 s->status |= PARA_STS_BUSY;
 305             }
 306         }
 307         parallel_update_irq(s);
 308         break;
 309     case PARA_REG_CTR:
 310         ret = s->control;
 311         break;
 312     }
 313     trace_parallel_ioport_read("SW", addr, ret);
 314     return ret;
 315 }
 316
 317 static uint32_t parallel_ioport_read_hw(void *opaque, uint32_t addr)
 318 {
 319     ParallelState *s = opaque;
 320     uint8_t ret = 0xff;
 321     addr &= 7;
 322     switch(addr) {
 323     case PARA_REG_DATA:
 324         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_DATA, &ret);
 325         if (s->last_read_offset != addr || s->datar != ret)
 326             pdebug("rd%02x\n", ret);
 327         s->datar = ret;
 328         break;
 329     case PARA_REG_STS:
 330         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_STATUS, &ret);
 331         ret &= ~PARA_STS_TMOUT;
 332         if (s->epp_timeout)
 333             ret |= PARA_STS_TMOUT;
 334         if (s->last_read_offset != addr || s->status != ret)
 335             pdebug("rs%02x\n", ret);
 336         s->status = ret;
 337         break;
 338     case PARA_REG_CTR:
 339         /* s->control has some bits fixed to 1. It is zero only when
 340            it has not been yet written to.  */
 341         if (s->control == 0) {
 342             qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_CONTROL, &ret);
 343             if (s->last_read_offset != addr)
 344                 pdebug("rc%02x\n", ret);
 345             s->control = ret;
 346         }
 347         else {
 348             ret = s->control;
 349             if (s->last_read_offset != addr)
 350                 pdebug("rc%02x\n", ret);
 351         }
 352         break;
 353     case PARA_REG_EPP_ADDR:
 354         if ((s->control & (PARA_CTR_DIR | PARA_CTR_SIGNAL)) !=
 355             (PARA_CTR_DIR | PARA_CTR_INIT))
 356             /* Controls not correct for EPP addr cycle, so do nothing */
 357             pdebug("ra%02x s\n", ret);
 358         else {
 359             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
 360             if (qemu_chr_fe_ioctl(&s->chr,
 361                                   CHR_IOCTL_PP_EPP_READ_ADDR, &ioarg)) {
 362                 s->epp_timeout = 1;
 363                 pdebug("ra%02x t\n", ret);
 364             }
 365             else
 366                 pdebug("ra%02x\n", ret);
 367         }
 368         break;
 369     case PARA_REG_EPP_DATA:
 370         if ((s->control & (PARA_CTR_DIR | PARA_CTR_SIGNAL)) !=
 371             (PARA_CTR_DIR | PARA_CTR_INIT))
 372             /* Controls not correct for EPP data cycle, so do nothing */
 373             pdebug("re%02x s\n", ret);
 374         else {
 375             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
 376             if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg)) {
 377                 s->epp_timeout = 1;
 378                 pdebug("re%02x t\n", ret);
 379             }
 380             else
 381                 pdebug("re%02x\n", ret);
 382         }
 383         break;
 384     }
 385     trace_parallel_ioport_read("HW", addr, ret);
 386     s->last_read_offset = addr;
 387     return ret;
 388 }
 389
 390 static uint32_t
 391 parallel_ioport_eppdata_read_hw2(void *opaque, uint32_t addr)
 392 {
 393     ParallelState *s = opaque;
 394     uint32_t ret;
 395     uint16_t eppdata = ~0;
 396     int err;
 397     struct ParallelIOArg ioarg = {
 398         .buffer = &eppdata, .count = sizeof(eppdata)
 399     };
 400     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
 401         /* Controls not correct for EPP data cycle, so do nothing */
 402         pdebug("re%04x s\n", eppdata);
 403         return eppdata;
 404     }
 405     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
 406     ret = le16_to_cpu(eppdata);
 407
 408     if (err) {
 409         s->epp_timeout = 1;
 410         pdebug("re%04x t\n", ret);
 411     }
 412     else
 413         pdebug("re%04x\n", ret);
 414     trace_parallel_ioport_read("EPP", addr, ret);
 415     return ret;
 416 }
 417
 418 static uint32_t
 419 parallel_ioport_eppdata_read_hw4(void *opaque, uint32_t addr)
 420 {
 421     ParallelState *s = opaque;
 422     uint32_t ret;
 423     uint32_t eppdata = ~0U;
 424     int err;
 425     struct ParallelIOArg ioarg = {
 426         .buffer = &eppdata, .count = sizeof(eppdata)
 427     };
 428     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
 429         /* Controls not correct for EPP data cycle, so do nothing */
 430         pdebug("re%08x s\n", eppdata);
 431         return eppdata;
 432     }
 433     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
 434     ret = le32_to_cpu(eppdata);
 435
 436     if (err) {
 437         s->epp_timeout = 1;
 438         pdebug("re%08x t\n", ret);
 439     }
 440     else
 441         pdebug("re%08x\n", ret);
 442     trace_parallel_ioport_read("EPP", addr, ret);
 443     return ret;
 444 }
 445
 446 static void parallel_ioport_ecp_write(void *opaque, uint32_t addr, uint32_t val)
 447 {
 448     trace_parallel_ioport_write("ECP", addr & 7, val);
 449     pdebug("wecp%d=%02x\n", addr & 7, val);
 450 }
 451
 452 static uint32_t parallel_ioport_ecp_read(void *opaque, uint32_t addr)
 453 {
 454     uint8_t ret = 0xff;
 455
 456     trace_parallel_ioport_read("ECP", addr & 7, ret);
 457     pdebug("recp%d:%02x\n", addr & 7, ret);
 458     return ret;
 459 }
 460
 461 static void parallel_reset(void *opaque)
 462 {
 463     ParallelState *s = opaque;
 464
 465     s->datar = ~0;
 466     s->dataw = ~0;
 467     s->status = PARA_STS_BUSY;
 468     s->status |= PARA_STS_ACK;
 469     s->status |= PARA_STS_ONLINE;
 470     s->status |= PARA_STS_ERROR;
 471     s->status |= PARA_STS_TMOUT;
 472     s->control = PARA_CTR_SELECT;
 473     s->control |= PARA_CTR_INIT;
 474     s->control |= 0xc0;
 475     s->irq_pending = 0;
 476     s->hw_driver = 0;
 477     s->epp_timeout = 0;
 478     s->last_read_offset = ~0U;
 479 }
 480
 481 static const int isa_parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
 482
 483 static const MemoryRegionPortio isa_parallel_portio_hw_list[] = {
 484     { 0, 8, 1,
 485       .read = parallel_ioport_read_hw,
 486       .write = parallel_ioport_write_hw },
 487     { 4, 1, 2,
 488       .read = parallel_ioport_eppdata_read_hw2,
 489       .write = parallel_ioport_eppdata_write_hw2 },
 490     { 4, 1, 4,
 491       .read = parallel_ioport_eppdata_read_hw4,
 492       .write = parallel_ioport_eppdata_write_hw4 },
 493     { 0x400, 8, 1,
 494       .read = parallel_ioport_ecp_read,
 495       .write = parallel_ioport_ecp_write },
 496     PORTIO_END_OF_LIST(),
 497 };
 498
 499 static const MemoryRegionPortio isa_parallel_portio_sw_list[] = {
 500     { 0, 8, 1,
 501       .read = parallel_ioport_read_sw,
 502       .write = parallel_ioport_write_sw },
 503     PORTIO_END_OF_LIST(),
 504 };
 505
 506
 507 static const VMStateDescription vmstate_parallel_isa = {
 508     .name = "parallel_isa",
 509     .version_id = 1,
 510     .minimum_version_id = 1,
 511     .fields      = (VMStateField[]) {
 512         VMSTATE_UINT8(state.dataw, ISAParallelState),
 513         VMSTATE_UINT8(state.datar, ISAParallelState),
 514         VMSTATE_UINT8(state.status, ISAParallelState),
 515         VMSTATE_UINT8(state.control, ISAParallelState),
 516         VMSTATE_INT32(state.irq_pending, ISAParallelState),
 517         VMSTATE_INT32(state.epp_timeout, ISAParallelState),
 518         VMSTATE_END_OF_LIST()
 519     }
 520 };
 521
 522 static int parallel_can_receive(void *opaque)
 523 {
 524      return 1;
 525 }
 526
 527 static void parallel_isa_realizefn(DeviceState *dev, Error **errp)
 528 {
 529     static int index;
 530     ISADevice *isadev = ISA_DEVICE(dev);
 531     ISAParallelState *isa = ISA_PARALLEL(dev);
 532     ParallelState *s = &isa->state;
 533     int base;
 534     uint8_t dummy;
 535
 536     if (!qemu_chr_fe_backend_connected(&s->chr)) {
 537         error_setg(errp, "Can't create parallel device, empty char device");
 538         return;
 539     }
 540
 541     if (isa->index == -1) {
 542         isa->index = index;
 543     }
 544     if (isa->index >= MAX_PARALLEL_PORTS) {
 545         error_setg(errp, "Max. supported number of parallel ports is %d.",
 546                    MAX_PARALLEL_PORTS);
 547         return;
 548     }
 549     if (isa->iobase == -1) {
 550         isa->iobase = isa_parallel_io[isa->index];
 551     }
 552     index++;
 553
 554     base = isa->iobase;
 555     isa_init_irq(isadev, &s->irq, isa->isairq);
 556     qemu_register_reset(parallel_reset, s);
 557
 558     qemu_chr_fe_set_handlers(&s->chr, parallel_can_receive, NULL,
 559                              NULL, NULL, s, NULL, true);
 560     if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_STATUS, &dummy) == 0) {
 561         s->hw_driver = 1;
 562         s->status = dummy;
 563     }
 564
 565     isa_register_portio_list(isadev, &s->portio_list, base,
 566                              (s->hw_driver
 567                               ? &isa_parallel_portio_hw_list[0]
 568                               : &isa_parallel_portio_sw_list[0]),
 569                              s, "parallel");
 570 }
 571
 572 static void parallel_isa_build_aml(ISADevice *isadev, Aml *scope)
 573 {
 574     ISAParallelState *isa = ISA_PARALLEL(isadev);
 575     Aml *dev;
 576     Aml *crs;
 577
 578     crs = aml_resource_template();
 579     aml_append(crs, aml_io(AML_DECODE16, isa->iobase, isa->iobase, 0x08, 0x08));
 580     aml_append(crs, aml_irq_no_flags(isa->isairq));
 581
 582     dev = aml_device("LPT%d", isa->index + 1);
 583     aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0400")));
 584     aml_append(dev, aml_name_decl("_UID", aml_int(isa->index + 1)));
 585     aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
 586     aml_append(dev, aml_name_decl("_CRS", crs));
 587
 588     aml_append(scope, dev);
 589 }
 590
 591 /* Memory mapped interface */
 592 static uint64_t parallel_mm_readfn(void *opaque, hwaddr addr, unsigned size)
 593 {
 594     ParallelState *s = opaque;
 595
 596     return parallel_ioport_read_sw(s, addr >> s->it_shift) &
 597         MAKE_64BIT_MASK(0, size * 8);
 598 }
 599
 600 static void parallel_mm_writefn(void *opaque, hwaddr addr,
 601                                 uint64_t value, unsigned size)
 602 {
 603     ParallelState *s = opaque;
 604
 605     parallel_ioport_write_sw(s, addr >> s->it_shift,
 606                              value & MAKE_64BIT_MASK(0, size * 8));
 607 }
 608
 609 static const MemoryRegionOps parallel_mm_ops = {
 610     .read = parallel_mm_readfn,
 611     .write = parallel_mm_writefn,
 612     .valid.min_access_size = 1,
 613     .valid.max_access_size = 4,
 614     .endianness = DEVICE_NATIVE_ENDIAN,
 615 };
 616
 617 /* If fd is zero, it means that the parallel device uses the console */
 618 bool parallel_mm_init(MemoryRegion *address_space,
 619                       hwaddr base, int it_shift, qemu_irq irq,
 620                       Chardev *chr)
 621 {
 622     ParallelState *s;
 623
 624     s = g_malloc0(sizeof(ParallelState));
 625     s->irq = irq;
 626     qemu_chr_fe_init(&s->chr, chr, &error_abort);
 627     s->it_shift = it_shift;
 628     qemu_register_reset(parallel_reset, s);
 629
 630     memory_region_init_io(&s->iomem, NULL, &parallel_mm_ops, s,
 631                           "parallel", 8 << it_shift);
 632     memory_region_add_subregion(address_space, base, &s->iomem);
 633     return true;
 634 }
 635
 636 static Property parallel_isa_properties[] = {
 637     DEFINE_PROP_UINT32("index", ISAParallelState, index,   -1),
 638     DEFINE_PROP_UINT32("iobase", ISAParallelState, iobase,  -1),
 639     DEFINE_PROP_UINT32("irq",   ISAParallelState, isairq,  7),
 640     DEFINE_PROP_CHR("chardev",  ISAParallelState, state.chr),
 641     DEFINE_PROP_END_OF_LIST(),
 642 };
 643
 644 static void parallel_isa_class_initfn(ObjectClass *klass, void *data)
 645 {
 646     DeviceClass *dc = DEVICE_CLASS(klass);
 647     ISADeviceClass *isa = ISA_DEVICE_CLASS(klass);
 648
 649     dc->realize = parallel_isa_realizefn;
 650     dc->vmsd = &vmstate_parallel_isa;
 651     isa->build_aml = parallel_isa_build_aml;
 652     device_class_set_props(dc, parallel_isa_properties);
 653     set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
 654 }
 655
 656 static const TypeInfo parallel_isa_info = {
 657     .name          = TYPE_ISA_PARALLEL,
 658     .parent        = TYPE_ISA_DEVICE,
 659     .instance_size = sizeof(ISAParallelState),
 660     .class_init    = parallel_isa_class_initfn,
 661 };
 662
 663 static void parallel_register_types(void)
 664 {
 665     type_register_static(&parallel_isa_info);
 666 }
 667
 668 type_init(parallel_register_types)