2 * vhost-user-scsi host device
4 * Copyright (c) 2016 Nutanix Inc. All rights reserved.
7 * Felipe Franciosi <felipe@nutanix.com>
9 * This work is largely based on the "vhost-scsi" implementation by:
10 * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
11 * Nicholas Bellinger <nab@risingtidesystems.com>
13 * This work is licensed under the terms of the GNU LGPL, version 2 or later.
14 * See the COPYING.LIB file in the top-level directory.
18 #include "qemu/osdep.h"
19 #include "qapi/error.h"
20 #include "qemu/error-report.h"
21 #include "hw/fw-path-provider.h"
22 #include "hw/qdev-core.h"
23 #include "hw/qdev-properties.h"
24 #include "hw/virtio/vhost.h"
25 #include "hw/virtio/vhost-backend.h"
26 #include "hw/virtio/vhost-user-scsi.h"
27 #include "hw/virtio/virtio.h"
28 #include "hw/virtio/virtio-access.h"
29 #include "chardev/char-fe.h"
30 #include "sysemu/sysemu.h"
32 /* Features supported by the host application */
33 static const int user_feature_bits
[] = {
34 VIRTIO_F_NOTIFY_ON_EMPTY
,
35 VIRTIO_RING_F_INDIRECT_DESC
,
36 VIRTIO_RING_F_EVENT_IDX
,
37 VIRTIO_SCSI_F_HOTPLUG
,
38 VHOST_INVALID_FEATURE_BIT
41 enum VhostUserProtocolFeature
{
42 VHOST_USER_PROTOCOL_F_RESET_DEVICE
= 13,
45 static void vhost_user_scsi_set_status(VirtIODevice
*vdev
, uint8_t status
)
47 VHostUserSCSI
*s
= (VHostUserSCSI
*)vdev
;
48 VHostSCSICommon
*vsc
= VHOST_SCSI_COMMON(s
);
49 bool start
= (status
& VIRTIO_CONFIG_S_DRIVER_OK
) && vdev
->vm_running
;
51 if (vsc
->dev
.started
== start
) {
58 ret
= vhost_scsi_common_start(vsc
);
60 error_report("unable to start vhost-user-scsi: %s", strerror(-ret
));
64 vhost_scsi_common_stop(vsc
);
68 static void vhost_user_scsi_reset(VirtIODevice
*vdev
)
70 VHostSCSICommon
*vsc
= VHOST_SCSI_COMMON(vdev
);
71 struct vhost_dev
*dev
= &vsc
->dev
;
74 * Historically, reset was not implemented so only reset devices
75 * that are expecting it.
77 if (!virtio_has_feature(dev
->protocol_features
,
78 VHOST_USER_PROTOCOL_F_RESET_DEVICE
)) {
82 if (dev
->vhost_ops
->vhost_reset_device
) {
83 dev
->vhost_ops
->vhost_reset_device(dev
);
87 static void vhost_dummy_handle_output(VirtIODevice
*vdev
, VirtQueue
*vq
)
91 static void vhost_user_scsi_realize(DeviceState
*dev
, Error
**errp
)
93 VirtIOSCSICommon
*vs
= VIRTIO_SCSI_COMMON(dev
);
94 VHostUserSCSI
*s
= VHOST_USER_SCSI(dev
);
95 VHostSCSICommon
*vsc
= VHOST_SCSI_COMMON(s
);
96 struct vhost_virtqueue
*vqs
= NULL
;
100 if (!vs
->conf
.chardev
.chr
) {
101 error_setg(errp
, "vhost-user-scsi: missing chardev");
105 virtio_scsi_common_realize(dev
, vhost_dummy_handle_output
,
106 vhost_dummy_handle_output
,
107 vhost_dummy_handle_output
, &err
);
109 error_propagate(errp
, err
);
113 if (!vhost_user_init(&s
->vhost_user
, &vs
->conf
.chardev
, errp
)) {
117 vsc
->dev
.nvqs
= 2 + vs
->conf
.num_queues
;
118 vsc
->dev
.vqs
= g_new0(struct vhost_virtqueue
, vsc
->dev
.nvqs
);
119 vsc
->dev
.vq_index
= 0;
120 vsc
->dev
.backend_features
= 0;
123 ret
= vhost_dev_init(&vsc
->dev
, &s
->vhost_user
,
124 VHOST_BACKEND_TYPE_USER
, 0);
126 error_setg(errp
, "vhost-user-scsi: vhost initialization failed: %s",
131 /* Channel and lun both are 0 for bootable vhost-user-scsi disk */
134 vsc
->target
= vs
->conf
.boot_tpgt
;
139 vhost_user_cleanup(&s
->vhost_user
);
142 virtio_scsi_common_unrealize(dev
);
145 static void vhost_user_scsi_unrealize(DeviceState
*dev
)
147 VirtIODevice
*vdev
= VIRTIO_DEVICE(dev
);
148 VHostUserSCSI
*s
= VHOST_USER_SCSI(dev
);
149 VHostSCSICommon
*vsc
= VHOST_SCSI_COMMON(s
);
150 struct vhost_virtqueue
*vqs
= vsc
->dev
.vqs
;
152 /* This will stop the vhost backend. */
153 vhost_user_scsi_set_status(vdev
, 0);
155 vhost_dev_cleanup(&vsc
->dev
);
158 virtio_scsi_common_unrealize(dev
);
159 vhost_user_cleanup(&s
->vhost_user
);
162 static Property vhost_user_scsi_properties
[] = {
163 DEFINE_PROP_CHR("chardev", VirtIOSCSICommon
, conf
.chardev
),
164 DEFINE_PROP_UINT32("boot_tpgt", VirtIOSCSICommon
, conf
.boot_tpgt
, 0),
165 DEFINE_PROP_UINT32("num_queues", VirtIOSCSICommon
, conf
.num_queues
, 1),
166 DEFINE_PROP_UINT32("virtqueue_size", VirtIOSCSICommon
, conf
.virtqueue_size
,
168 DEFINE_PROP_UINT32("max_sectors", VirtIOSCSICommon
, conf
.max_sectors
,
170 DEFINE_PROP_UINT32("cmd_per_lun", VirtIOSCSICommon
, conf
.cmd_per_lun
, 128),
171 DEFINE_PROP_BIT64("hotplug", VHostSCSICommon
, host_features
,
172 VIRTIO_SCSI_F_HOTPLUG
,
174 DEFINE_PROP_BIT64("param_change", VHostSCSICommon
, host_features
,
175 VIRTIO_SCSI_F_CHANGE
,
177 DEFINE_PROP_BIT64("t10_pi", VHostSCSICommon
, host_features
,
178 VIRTIO_SCSI_F_T10_PI
,
180 DEFINE_PROP_END_OF_LIST(),
183 static const VMStateDescription vmstate_vhost_scsi
= {
184 .name
= "virtio-scsi",
185 .minimum_version_id
= 1,
187 .fields
= (VMStateField
[]) {
188 VMSTATE_VIRTIO_DEVICE
,
189 VMSTATE_END_OF_LIST()
193 static void vhost_user_scsi_class_init(ObjectClass
*klass
, void *data
)
195 DeviceClass
*dc
= DEVICE_CLASS(klass
);
196 VirtioDeviceClass
*vdc
= VIRTIO_DEVICE_CLASS(klass
);
197 FWPathProviderClass
*fwc
= FW_PATH_PROVIDER_CLASS(klass
);
199 device_class_set_props(dc
, vhost_user_scsi_properties
);
200 dc
->vmsd
= &vmstate_vhost_scsi
;
201 set_bit(DEVICE_CATEGORY_STORAGE
, dc
->categories
);
202 vdc
->realize
= vhost_user_scsi_realize
;
203 vdc
->unrealize
= vhost_user_scsi_unrealize
;
204 vdc
->get_features
= vhost_scsi_common_get_features
;
205 vdc
->set_config
= vhost_scsi_common_set_config
;
206 vdc
->set_status
= vhost_user_scsi_set_status
;
207 vdc
->reset
= vhost_user_scsi_reset
;
208 fwc
->get_dev_path
= vhost_scsi_common_get_fw_dev_path
;
211 static void vhost_user_scsi_instance_init(Object
*obj
)
213 VHostSCSICommon
*vsc
= VHOST_SCSI_COMMON(obj
);
215 vsc
->feature_bits
= user_feature_bits
;
217 /* Add the bootindex property for this object */
218 device_add_bootindex_property(obj
, &vsc
->bootindex
, "bootindex", NULL
,
222 static const TypeInfo vhost_user_scsi_info
= {
223 .name
= TYPE_VHOST_USER_SCSI
,
224 .parent
= TYPE_VHOST_SCSI_COMMON
,
225 .instance_size
= sizeof(VHostUserSCSI
),
226 .class_init
= vhost_user_scsi_class_init
,
227 .instance_init
= vhost_user_scsi_instance_init
,
228 .interfaces
= (InterfaceInfo
[]) {
229 { TYPE_FW_PATH_PROVIDER
},
234 static void virtio_register_types(void)
236 type_register_static(&vhost_user_scsi_info
);
239 type_init(virtio_register_types
)