tests/qtest/cmsdk-apb-watchdog-test: Test clock changes
[qemu/ar7.git] / hw / char / bcm2835_aux.c
blob96410b1ff8662c21a74741a67e3545e0e5516cb9
1 /*
2 * BCM2835 (Raspberry Pi / Pi 2) Aux block (mini UART and SPI).
3 * Copyright (c) 2015, Microsoft
4 * Written by Andrew Baumann
5 * Based on pl011.c, copyright terms below:
7 * Arm PrimeCell PL011 UART
9 * Copyright (c) 2006 CodeSourcery.
10 * Written by Paul Brook
12 * This code is licensed under the GPL.
14 * At present only the core UART functions (data path for tx/rx) are
15 * implemented. The following features/registers are unimplemented:
16 * - Line/modem control
17 * - Scratch register
18 * - Extra control
19 * - Baudrate
20 * - SPI interfaces
23 #include "qemu/osdep.h"
24 #include "hw/char/bcm2835_aux.h"
25 #include "hw/irq.h"
26 #include "hw/qdev-properties.h"
27 #include "hw/qdev-properties-system.h"
28 #include "migration/vmstate.h"
29 #include "qemu/log.h"
30 #include "qemu/module.h"
32 #define AUX_IRQ 0x0
33 #define AUX_ENABLES 0x4
34 #define AUX_MU_IO_REG 0x40
35 #define AUX_MU_IER_REG 0x44
36 #define AUX_MU_IIR_REG 0x48
37 #define AUX_MU_LCR_REG 0x4c
38 #define AUX_MU_MCR_REG 0x50
39 #define AUX_MU_LSR_REG 0x54
40 #define AUX_MU_MSR_REG 0x58
41 #define AUX_MU_SCRATCH 0x5c
42 #define AUX_MU_CNTL_REG 0x60
43 #define AUX_MU_STAT_REG 0x64
44 #define AUX_MU_BAUD_REG 0x68
46 /* bits in IER/IIR registers */
47 #define RX_INT 0x1
48 #define TX_INT 0x2
50 static void bcm2835_aux_update(BCM2835AuxState *s)
52 /* signal an interrupt if either:
53 * 1. rx interrupt is enabled and we have a non-empty rx fifo, or
54 * 2. the tx interrupt is enabled (since we instantly drain the tx fifo)
56 s->iir = 0;
57 if ((s->ier & RX_INT) && s->read_count != 0) {
58 s->iir |= RX_INT;
60 if (s->ier & TX_INT) {
61 s->iir |= TX_INT;
63 qemu_set_irq(s->irq, s->iir != 0);
66 static uint64_t bcm2835_aux_read(void *opaque, hwaddr offset, unsigned size)
68 BCM2835AuxState *s = opaque;
69 uint32_t c, res;
71 switch (offset) {
72 case AUX_IRQ:
73 return s->iir != 0;
75 case AUX_ENABLES:
76 return 1; /* mini UART permanently enabled */
78 case AUX_MU_IO_REG:
79 /* "DLAB bit set means access baudrate register" is NYI */
80 c = s->read_fifo[s->read_pos];
81 if (s->read_count > 0) {
82 s->read_count--;
83 if (++s->read_pos == BCM2835_AUX_RX_FIFO_LEN) {
84 s->read_pos = 0;
87 qemu_chr_fe_accept_input(&s->chr);
88 bcm2835_aux_update(s);
89 return c;
91 case AUX_MU_IER_REG:
92 /* "DLAB bit set means access baudrate register" is NYI */
93 return 0xc0 | s->ier; /* FIFO enables always read 1 */
95 case AUX_MU_IIR_REG:
96 res = 0xc0; /* FIFO enables */
97 /* The spec is unclear on what happens when both tx and rx
98 * interrupts are active, besides that this cannot occur. At
99 * present, we choose to prioritise the rx interrupt, since
100 * the tx fifo is always empty. */
101 if (s->read_count != 0) {
102 res |= 0x4;
103 } else {
104 res |= 0x2;
106 if (s->iir == 0) {
107 res |= 0x1;
109 return res;
111 case AUX_MU_LCR_REG:
112 qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_LCR_REG unsupported\n", __func__);
113 return 0;
115 case AUX_MU_MCR_REG:
116 qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_MCR_REG unsupported\n", __func__);
117 return 0;
119 case AUX_MU_LSR_REG:
120 res = 0x60; /* tx idle, empty */
121 if (s->read_count != 0) {
122 res |= 0x1;
124 return res;
126 case AUX_MU_MSR_REG:
127 qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_MSR_REG unsupported\n", __func__);
128 return 0;
130 case AUX_MU_SCRATCH:
131 qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_SCRATCH unsupported\n", __func__);
132 return 0;
134 case AUX_MU_CNTL_REG:
135 return 0x3; /* tx, rx enabled */
137 case AUX_MU_STAT_REG:
138 res = 0x30e; /* space in the output buffer, empty tx fifo, idle tx/rx */
139 if (s->read_count > 0) {
140 res |= 0x1; /* data in input buffer */
141 assert(s->read_count < BCM2835_AUX_RX_FIFO_LEN);
142 res |= ((uint32_t)s->read_count) << 16; /* rx fifo fill level */
144 return res;
146 case AUX_MU_BAUD_REG:
147 qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_BAUD_REG unsupported\n", __func__);
148 return 0;
150 default:
151 qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
152 __func__, offset);
153 return 0;
157 static void bcm2835_aux_write(void *opaque, hwaddr offset, uint64_t value,
158 unsigned size)
160 BCM2835AuxState *s = opaque;
161 unsigned char ch;
163 switch (offset) {
164 case AUX_ENABLES:
165 if (value != 1) {
166 qemu_log_mask(LOG_UNIMP, "%s: unsupported attempt to enable SPI"
167 " or disable UART: 0x%"PRIx64"\n",
168 __func__, value);
170 break;
172 case AUX_MU_IO_REG:
173 /* "DLAB bit set means access baudrate register" is NYI */
174 ch = value;
175 /* XXX this blocks entire thread. Rewrite to use
176 * qemu_chr_fe_write and background I/O callbacks */
177 qemu_chr_fe_write_all(&s->chr, &ch, 1);
178 break;
180 case AUX_MU_IER_REG:
181 /* "DLAB bit set means access baudrate register" is NYI */
182 s->ier = value & (TX_INT | RX_INT);
183 bcm2835_aux_update(s);
184 break;
186 case AUX_MU_IIR_REG:
187 if (value & 0x2) {
188 s->read_count = 0;
190 break;
192 case AUX_MU_LCR_REG:
193 qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_LCR_REG unsupported\n", __func__);
194 break;
196 case AUX_MU_MCR_REG:
197 qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_MCR_REG unsupported\n", __func__);
198 break;
200 case AUX_MU_SCRATCH:
201 qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_SCRATCH unsupported\n", __func__);
202 break;
204 case AUX_MU_CNTL_REG:
205 qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_CNTL_REG unsupported\n", __func__);
206 break;
208 case AUX_MU_BAUD_REG:
209 qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_BAUD_REG unsupported\n", __func__);
210 break;
212 default:
213 qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
214 __func__, offset);
217 bcm2835_aux_update(s);
220 static int bcm2835_aux_can_receive(void *opaque)
222 BCM2835AuxState *s = opaque;
224 return s->read_count < BCM2835_AUX_RX_FIFO_LEN;
227 static void bcm2835_aux_put_fifo(void *opaque, uint8_t value)
229 BCM2835AuxState *s = opaque;
230 int slot;
232 slot = s->read_pos + s->read_count;
233 if (slot >= BCM2835_AUX_RX_FIFO_LEN) {
234 slot -= BCM2835_AUX_RX_FIFO_LEN;
236 s->read_fifo[slot] = value;
237 s->read_count++;
238 if (s->read_count == BCM2835_AUX_RX_FIFO_LEN) {
239 /* buffer full */
241 bcm2835_aux_update(s);
244 static void bcm2835_aux_receive(void *opaque, const uint8_t *buf, int size)
246 bcm2835_aux_put_fifo(opaque, *buf);
249 static const MemoryRegionOps bcm2835_aux_ops = {
250 .read = bcm2835_aux_read,
251 .write = bcm2835_aux_write,
252 .endianness = DEVICE_NATIVE_ENDIAN,
253 .impl.min_access_size = 4,
254 .impl.max_access_size = 4,
255 .valid.min_access_size = 1,
256 .valid.max_access_size = 4,
259 static const VMStateDescription vmstate_bcm2835_aux = {
260 .name = TYPE_BCM2835_AUX,
261 .version_id = 1,
262 .minimum_version_id = 1,
263 .fields = (VMStateField[]) {
264 VMSTATE_UINT8_ARRAY(read_fifo, BCM2835AuxState,
265 BCM2835_AUX_RX_FIFO_LEN),
266 VMSTATE_UINT8(read_pos, BCM2835AuxState),
267 VMSTATE_UINT8(read_count, BCM2835AuxState),
268 VMSTATE_UINT8(ier, BCM2835AuxState),
269 VMSTATE_UINT8(iir, BCM2835AuxState),
270 VMSTATE_END_OF_LIST()
274 static void bcm2835_aux_init(Object *obj)
276 SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
277 BCM2835AuxState *s = BCM2835_AUX(obj);
279 memory_region_init_io(&s->iomem, OBJECT(s), &bcm2835_aux_ops, s,
280 TYPE_BCM2835_AUX, 0x100);
281 sysbus_init_mmio(sbd, &s->iomem);
282 sysbus_init_irq(sbd, &s->irq);
285 static void bcm2835_aux_realize(DeviceState *dev, Error **errp)
287 BCM2835AuxState *s = BCM2835_AUX(dev);
289 qemu_chr_fe_set_handlers(&s->chr, bcm2835_aux_can_receive,
290 bcm2835_aux_receive, NULL, NULL, s, NULL, true);
293 static Property bcm2835_aux_props[] = {
294 DEFINE_PROP_CHR("chardev", BCM2835AuxState, chr),
295 DEFINE_PROP_END_OF_LIST(),
298 static void bcm2835_aux_class_init(ObjectClass *oc, void *data)
300 DeviceClass *dc = DEVICE_CLASS(oc);
302 dc->realize = bcm2835_aux_realize;
303 dc->vmsd = &vmstate_bcm2835_aux;
304 set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
305 device_class_set_props(dc, bcm2835_aux_props);
308 static const TypeInfo bcm2835_aux_info = {
309 .name = TYPE_BCM2835_AUX,
310 .parent = TYPE_SYS_BUS_DEVICE,
311 .instance_size = sizeof(BCM2835AuxState),
312 .instance_init = bcm2835_aux_init,
313 .class_init = bcm2835_aux_class_init,
316 static void bcm2835_aux_register_types(void)
318 type_register_static(&bcm2835_aux_info);
321 type_init(bcm2835_aux_register_types)