hw/arm/realview.c

   1 /*
   2  * ARM RealView Baseboard System emulation.
   3  *
   4  * Copyright (c) 2006-2007 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the GPL.
   8  */
   9
  10 #include "qemu/osdep.h"
  11 #include "qapi/error.h"
  12 #include "qemu-common.h"
  13 #include "cpu.h"
  14 #include "hw/sysbus.h"
  15 #include "hw/arm/arm.h"
  16 #include "hw/arm/primecell.h"
  17 #include "hw/devices.h"
  18 #include "hw/pci/pci.h"
  19 #include "net/net.h"
  20 #include "sysemu/sysemu.h"
  21 #include "hw/boards.h"
  22 #include "hw/i2c/i2c.h"
  23 #include "sysemu/block-backend.h"
  24 #include "exec/address-spaces.h"
  25 #include "qemu/error-report.h"
  26 #include "hw/char/pl011.h"
  27
  28 #define SMP_BOOT_ADDR 0xe0000000
  29 #define SMP_BOOTREG_ADDR 0x10000030
  30
  31 /* Board init.  */
  32
  33 static struct arm_boot_info realview_binfo = {
  34     .smp_loader_start = SMP_BOOT_ADDR,
  35     .smp_bootreg_addr = SMP_BOOTREG_ADDR,
  36 };
  37
  38 /* The following two lists must be consistent.  */
  39 enum realview_board_type {
  40     BOARD_EB,
  41     BOARD_EB_MPCORE,
  42     BOARD_PB_A8,
  43     BOARD_PBX_A9,
  44 };
  45
  46 static const int realview_board_id[] = {
  47     0x33b,
  48     0x33b,
  49     0x769,
  50     0x76d
  51 };
  52
  53 static void realview_init(MachineState *machine,
  54                           enum realview_board_type board_type)
  55 {
  56     ARMCPU *cpu = NULL;
  57     CPUARMState *env;
  58     ObjectClass *cpu_oc;
  59     MemoryRegion *sysmem = get_system_memory();
  60     MemoryRegion *ram_lo;
  61     MemoryRegion *ram_hi = g_new(MemoryRegion, 1);
  62     MemoryRegion *ram_alias = g_new(MemoryRegion, 1);
  63     MemoryRegion *ram_hack = g_new(MemoryRegion, 1);
  64     DeviceState *dev, *sysctl, *gpio2, *pl041;
  65     SysBusDevice *busdev;
  66     qemu_irq pic[64];
  67     qemu_irq mmc_irq[2];
  68     PCIBus *pci_bus = NULL;
  69     NICInfo *nd;
  70     I2CBus *i2c;
  71     int n;
  72     int done_nic = 0;
  73     qemu_irq cpu_irq[4];
  74     int is_mpcore = 0;
  75     int is_pb = 0;
  76     uint32_t proc_id = 0;
  77     uint32_t sys_id;
  78     ram_addr_t low_ram_size;
  79     ram_addr_t ram_size = machine->ram_size;
  80     hwaddr periphbase = 0;
  81
  82     switch (board_type) {
  83     case BOARD_EB:
  84         break;
  85     case BOARD_EB_MPCORE:
  86         is_mpcore = 1;
  87         periphbase = 0x10100000;
  88         break;
  89     case BOARD_PB_A8:
  90         is_pb = 1;
  91         break;
  92     case BOARD_PBX_A9:
  93         is_mpcore = 1;
  94         is_pb = 1;
  95         periphbase = 0x1f000000;
  96         break;
  97     }
  98
  99     cpu_oc = cpu_class_by_name(TYPE_ARM_CPU, machine->cpu_model);
 100     if (!cpu_oc) {
 101         fprintf(stderr, "Unable to find CPU definition\n");
 102         exit(1);
 103     }
 104
 105     for (n = 0; n < smp_cpus; n++) {
 106         Object *cpuobj = object_new(object_class_get_name(cpu_oc));
 107
 108         /* By default A9,A15 and ARM1176 CPUs have EL3 enabled.  This board
 109          * does not currently support EL3 so the CPU EL3 property is disabled
 110          * before realization.
 111          */
 112         if (object_property_find(cpuobj, "has_el3", NULL)) {
 113             object_property_set_bool(cpuobj, false, "has_el3", &error_fatal);
 114         }
 115
 116         if (is_pb && is_mpcore) {
 117             object_property_set_int(cpuobj, periphbase, "reset-cbar",
 118                                     &error_fatal);
 119         }
 120
 121         object_property_set_bool(cpuobj, true, "realized", &error_fatal);
 122
 123         cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpuobj), ARM_CPU_IRQ);
 124     }
 125     cpu = ARM_CPU(first_cpu);
 126     env = &cpu->env;
 127     if (arm_feature(env, ARM_FEATURE_V7)) {
 128         if (is_mpcore) {
 129             proc_id = 0x0c000000;
 130         } else {
 131             proc_id = 0x0e000000;
 132         }
 133     } else if (arm_feature(env, ARM_FEATURE_V6K)) {
 134         proc_id = 0x06000000;
 135     } else if (arm_feature(env, ARM_FEATURE_V6)) {
 136         proc_id = 0x04000000;
 137     } else {
 138         proc_id = 0x02000000;
 139     }
 140
 141     if (is_pb && ram_size > 0x20000000) {
 142         /* Core tile RAM.  */
 143         ram_lo = g_new(MemoryRegion, 1);
 144         low_ram_size = ram_size - 0x20000000;
 145         ram_size = 0x20000000;
 146         memory_region_init_ram(ram_lo, NULL, "realview.lowmem", low_ram_size,
 147                                &error_fatal);
 148         memory_region_add_subregion(sysmem, 0x20000000, ram_lo);
 149     }
 150
 151     memory_region_init_ram(ram_hi, NULL, "realview.highmem", ram_size,
 152                            &error_fatal);
 153     low_ram_size = ram_size;
 154     if (low_ram_size > 0x10000000)
 155       low_ram_size = 0x10000000;
 156     /* SDRAM at address zero.  */
 157     memory_region_init_alias(ram_alias, NULL, "realview.alias",
 158                              ram_hi, 0, low_ram_size);
 159     memory_region_add_subregion(sysmem, 0, ram_alias);
 160     if (is_pb) {
 161         /* And again at a high address.  */
 162         memory_region_add_subregion(sysmem, 0x70000000, ram_hi);
 163     } else {
 164         ram_size = low_ram_size;
 165     }
 166
 167     sys_id = is_pb ? 0x01780500 : 0xc1400400;
 168     sysctl = qdev_create(NULL, "realview_sysctl");
 169     qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
 170     qdev_prop_set_uint32(sysctl, "proc_id", proc_id);
 171     qdev_init_nofail(sysctl);
 172     sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000);
 173
 174     if (is_mpcore) {
 175         dev = qdev_create(NULL, is_pb ? "a9mpcore_priv": "realview_mpcore");
 176         qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
 177         qdev_init_nofail(dev);
 178         busdev = SYS_BUS_DEVICE(dev);
 179         sysbus_mmio_map(busdev, 0, periphbase);
 180         for (n = 0; n < smp_cpus; n++) {
 181             sysbus_connect_irq(busdev, n, cpu_irq[n]);
 182         }
 183         sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL);
 184         /* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */
 185         realview_binfo.gic_cpu_if_addr = periphbase + 0x100;
 186     } else {
 187         uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;
 188         /* For now just create the nIRQ GIC, and ignore the others.  */
 189         dev = sysbus_create_simple("realview_gic", gic_addr, cpu_irq[0]);
 190     }
 191     for (n = 0; n < 64; n++) {
 192         pic[n] = qdev_get_gpio_in(dev, n);
 193     }
 194
 195     pl041 = qdev_create(NULL, "pl041");
 196     qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
 197     qdev_init_nofail(pl041);
 198     sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, 0x10004000);
 199     sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[19]);
 200
 201     sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);
 202     sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);
 203
 204     pl011_create(0x10009000, pic[12], serial_hds[0]);
 205     pl011_create(0x1000a000, pic[13], serial_hds[1]);
 206     pl011_create(0x1000b000, pic[14], serial_hds[2]);
 207     pl011_create(0x1000c000, pic[15], serial_hds[3]);
 208
 209     /* DMA controller is optional, apparently.  */
 210     sysbus_create_simple("pl081", 0x10030000, pic[24]);
 211
 212     sysbus_create_simple("sp804", 0x10011000, pic[4]);
 213     sysbus_create_simple("sp804", 0x10012000, pic[5]);
 214
 215     sysbus_create_simple("pl061", 0x10013000, pic[6]);
 216     sysbus_create_simple("pl061", 0x10014000, pic[7]);
 217     gpio2 = sysbus_create_simple("pl061", 0x10015000, pic[8]);
 218
 219     sysbus_create_simple("pl111", 0x10020000, pic[23]);
 220
 221     dev = sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL);
 222     /* Wire up MMC card detect and read-only signals. These have
 223      * to go to both the PL061 GPIO and the sysctl register.
 224      * Note that the PL181 orders these lines (readonly,inserted)
 225      * and the PL061 has them the other way about. Also the card
 226      * detect line is inverted.
 227      */
 228     mmc_irq[0] = qemu_irq_split(
 229         qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT),
 230         qdev_get_gpio_in(gpio2, 1));
 231     mmc_irq[1] = qemu_irq_split(
 232         qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN),
 233         qemu_irq_invert(qdev_get_gpio_in(gpio2, 0)));
 234     qdev_connect_gpio_out(dev, 0, mmc_irq[0]);
 235     qdev_connect_gpio_out(dev, 1, mmc_irq[1]);
 236
 237     sysbus_create_simple("pl031", 0x10017000, pic[10]);
 238
 239     if (!is_pb) {
 240         dev = qdev_create(NULL, "realview_pci");
 241         busdev = SYS_BUS_DEVICE(dev);
 242         qdev_init_nofail(dev);
 243         sysbus_mmio_map(busdev, 0, 0x10019000); /* PCI controller registers */
 244         sysbus_mmio_map(busdev, 1, 0x60000000); /* PCI self-config */
 245         sysbus_mmio_map(busdev, 2, 0x61000000); /* PCI config */
 246         sysbus_mmio_map(busdev, 3, 0x62000000); /* PCI I/O */
 247         sysbus_mmio_map(busdev, 4, 0x63000000); /* PCI memory window 1 */
 248         sysbus_mmio_map(busdev, 5, 0x64000000); /* PCI memory window 2 */
 249         sysbus_mmio_map(busdev, 6, 0x68000000); /* PCI memory window 3 */
 250         sysbus_connect_irq(busdev, 0, pic[48]);
 251         sysbus_connect_irq(busdev, 1, pic[49]);
 252         sysbus_connect_irq(busdev, 2, pic[50]);
 253         sysbus_connect_irq(busdev, 3, pic[51]);
 254         pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
 255         if (machine_usb(machine)) {
 256             pci_create_simple(pci_bus, -1, "pci-ohci");
 257         }
 258         n = drive_get_max_bus(IF_SCSI);
 259         while (n >= 0) {
 260             lsi53c895a_create(pci_bus);
 261             n--;
 262         }
 263     }
 264     for(n = 0; n < nb_nics; n++) {
 265         nd = &nd_table[n];
 266
 267         if (!done_nic && (!nd->model ||
 268                     strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0)) {
 269             if (is_pb) {
 270                 lan9118_init(nd, 0x4e000000, pic[28]);
 271             } else {
 272                 smc91c111_init(nd, 0x4e000000, pic[28]);
 273             }
 274             done_nic = 1;
 275         } else {
 276             if (pci_bus) {
 277                 pci_nic_init_nofail(nd, pci_bus, "rtl8139", NULL);
 278             }
 279         }
 280     }
 281
 282     dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL);
 283     i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c");
 284     i2c_create_slave(i2c, "ds1338", 0x68);
 285
 286     /* Memory map for RealView Emulation Baseboard:  */
 287     /* 0x10000000 System registers.  */
 288     /*  0x10001000 System controller.  */
 289     /* 0x10002000 Two-Wire Serial Bus.  */
 290     /* 0x10003000 Reserved.  */
 291     /*  0x10004000 AACI.  */
 292     /*  0x10005000 MCI.  */
 293     /* 0x10006000 KMI0.  */
 294     /* 0x10007000 KMI1.  */
 295     /*  0x10008000 Character LCD. (EB) */
 296     /* 0x10009000 UART0.  */
 297     /* 0x1000a000 UART1.  */
 298     /* 0x1000b000 UART2.  */
 299     /* 0x1000c000 UART3.  */
 300     /*  0x1000d000 SSPI.  */
 301     /*  0x1000e000 SCI.  */
 302     /* 0x1000f000 Reserved.  */
 303     /*  0x10010000 Watchdog.  */
 304     /* 0x10011000 Timer 0+1.  */
 305     /* 0x10012000 Timer 2+3.  */
 306     /*  0x10013000 GPIO 0.  */
 307     /*  0x10014000 GPIO 1.  */
 308     /*  0x10015000 GPIO 2.  */
 309     /*  0x10002000 Two-Wire Serial Bus - DVI. (PB) */
 310     /* 0x10017000 RTC.  */
 311     /*  0x10018000 DMC.  */
 312     /*  0x10019000 PCI controller config.  */
 313     /*  0x10020000 CLCD.  */
 314     /* 0x10030000 DMA Controller.  */
 315     /* 0x10040000 GIC1. (EB) */
 316     /*  0x10050000 GIC2. (EB) */
 317     /*  0x10060000 GIC3. (EB) */
 318     /*  0x10070000 GIC4. (EB) */
 319     /*  0x10080000 SMC.  */
 320     /* 0x1e000000 GIC1. (PB) */
 321     /*  0x1e001000 GIC2. (PB) */
 322     /*  0x1e002000 GIC3. (PB) */
 323     /*  0x1e003000 GIC4. (PB) */
 324     /*  0x40000000 NOR flash.  */
 325     /*  0x44000000 DoC flash.  */
 326     /*  0x48000000 SRAM.  */
 327     /*  0x4c000000 Configuration flash.  */
 328     /* 0x4e000000 Ethernet.  */
 329     /*  0x4f000000 USB.  */
 330     /*  0x50000000 PISMO.  */
 331     /*  0x54000000 PISMO.  */
 332     /*  0x58000000 PISMO.  */
 333     /*  0x5c000000 PISMO.  */
 334     /* 0x60000000 PCI.  */
 335     /* 0x60000000 PCI Self Config.  */
 336     /* 0x61000000 PCI Config.  */
 337     /* 0x62000000 PCI IO.  */
 338     /* 0x63000000 PCI mem 0.  */
 339     /* 0x64000000 PCI mem 1.  */
 340     /* 0x68000000 PCI mem 2.  */
 341
 342     /* ??? Hack to map an additional page of ram for the secondary CPU
 343        startup code.  I guess this works on real hardware because the
 344        BootROM happens to be in ROM/flash or in memory that isn't clobbered
 345        until after Linux boots the secondary CPUs.  */
 346     memory_region_init_ram(ram_hack, NULL, "realview.hack", 0x1000,
 347                            &error_fatal);
 348     memory_region_add_subregion(sysmem, SMP_BOOT_ADDR, ram_hack);
 349
 350     realview_binfo.ram_size = ram_size;
 351     realview_binfo.kernel_filename = machine->kernel_filename;
 352     realview_binfo.kernel_cmdline = machine->kernel_cmdline;
 353     realview_binfo.initrd_filename = machine->initrd_filename;
 354     realview_binfo.nb_cpus = smp_cpus;
 355     realview_binfo.board_id = realview_board_id[board_type];
 356     realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0);
 357     arm_load_kernel(ARM_CPU(first_cpu), &realview_binfo);
 358 }
 359
 360 static void realview_eb_init(MachineState *machine)
 361 {
 362     if (!machine->cpu_model) {
 363         machine->cpu_model = "arm926";
 364     }
 365     realview_init(machine, BOARD_EB);
 366 }
 367
 368 static void realview_eb_mpcore_init(MachineState *machine)
 369 {
 370     if (!machine->cpu_model) {
 371         machine->cpu_model = "arm11mpcore";
 372     }
 373     realview_init(machine, BOARD_EB_MPCORE);
 374 }
 375
 376 static void realview_pb_a8_init(MachineState *machine)
 377 {
 378     if (!machine->cpu_model) {
 379         machine->cpu_model = "cortex-a8";
 380     }
 381     realview_init(machine, BOARD_PB_A8);
 382 }
 383
 384 static void realview_pbx_a9_init(MachineState *machine)
 385 {
 386     if (!machine->cpu_model) {
 387         machine->cpu_model = "cortex-a9";
 388     }
 389     realview_init(machine, BOARD_PBX_A9);
 390 }
 391
 392 static void realview_eb_class_init(ObjectClass *oc, void *data)
 393 {
 394     MachineClass *mc = MACHINE_CLASS(oc);
 395
 396     mc->desc = "ARM RealView Emulation Baseboard (ARM926EJ-S)";
 397     mc->init = realview_eb_init;
 398     mc->block_default_type = IF_SCSI;
 399 }
 400
 401 static const TypeInfo realview_eb_type = {
 402     .name = MACHINE_TYPE_NAME("realview-eb"),
 403     .parent = TYPE_MACHINE,
 404     .class_init = realview_eb_class_init,
 405 };
 406
 407 static void realview_eb_mpcore_class_init(ObjectClass *oc, void *data)
 408 {
 409     MachineClass *mc = MACHINE_CLASS(oc);
 410
 411     mc->desc = "ARM RealView Emulation Baseboard (ARM11MPCore)";
 412     mc->init = realview_eb_mpcore_init;
 413     mc->block_default_type = IF_SCSI;
 414     mc->max_cpus = 4;
 415 }
 416
 417 static const TypeInfo realview_eb_mpcore_type = {
 418     .name = MACHINE_TYPE_NAME("realview-eb-mpcore"),
 419     .parent = TYPE_MACHINE,
 420     .class_init = realview_eb_mpcore_class_init,
 421 };
 422
 423 static void realview_pb_a8_class_init(ObjectClass *oc, void *data)
 424 {
 425     MachineClass *mc = MACHINE_CLASS(oc);
 426
 427     mc->desc = "ARM RealView Platform Baseboard for Cortex-A8";
 428     mc->init = realview_pb_a8_init;
 429 }
 430
 431 static const TypeInfo realview_pb_a8_type = {
 432     .name = MACHINE_TYPE_NAME("realview-pb-a8"),
 433     .parent = TYPE_MACHINE,
 434     .class_init = realview_pb_a8_class_init,
 435 };
 436
 437 static void realview_pbx_a9_class_init(ObjectClass *oc, void *data)
 438 {
 439     MachineClass *mc = MACHINE_CLASS(oc);
 440
 441     mc->desc = "ARM RealView Platform Baseboard Explore for Cortex-A9";
 442     mc->init = realview_pbx_a9_init;
 443     mc->max_cpus = 4;
 444 }
 445
 446 static const TypeInfo realview_pbx_a9_type = {
 447     .name = MACHINE_TYPE_NAME("realview-pbx-a9"),
 448     .parent = TYPE_MACHINE,
 449     .class_init = realview_pbx_a9_class_init,
 450 };
 451
 452 static void realview_machine_init(void)
 453 {
 454     type_register_static(&realview_eb_type);
 455     type_register_static(&realview_eb_mpcore_type);
 456     type_register_static(&realview_pb_a8_type);
 457     type_register_static(&realview_pbx_a9_type);
 458 }
 459
 460 type_init(realview_machine_init)