hw/sd/pxa2xx_mmci.c

   1 /*
   2  * Intel XScale PXA255/270 MultiMediaCard/SD/SDIO Controller emulation.
   3  *
   4  * Copyright (c) 2006 Openedhand Ltd.
   5  * Written by Andrzej Zaborowski <balrog@zabor.org>
   6  *
   7  * This code is licensed under the GPLv2.
   8  *
   9  * Contributions after 2012-01-13 are licensed under the terms of the
  10  * GNU GPL, version 2 or (at your option) any later version.
  11  */
  12
  13 #include "qemu/osdep.h"
  14 #include "qapi/error.h"
  15 #include "hw/irq.h"
  16 #include "hw/sysbus.h"
  17 #include "migration/vmstate.h"
  18 #include "hw/arm/pxa.h"
  19 #include "hw/sd/sd.h"
  20 #include "hw/qdev-properties.h"
  21 #include "qemu/log.h"
  22 #include "qemu/module.h"
  23 #include "trace.h"
  24 #include "qom/object.h"
  25
  26 #define TYPE_PXA2XX_MMCI_BUS "pxa2xx-mmci-bus"
  27 /* This is reusing the SDBus typedef from SD_BUS */
  28 DECLARE_INSTANCE_CHECKER(SDBus, PXA2XX_MMCI_BUS,
  29                          TYPE_PXA2XX_MMCI_BUS)
  30
  31 struct PXA2xxMMCIState {
  32     SysBusDevice parent_obj;
  33
  34     MemoryRegion iomem;
  35     qemu_irq irq;
  36     qemu_irq rx_dma;
  37     qemu_irq tx_dma;
  38     qemu_irq inserted;
  39     qemu_irq readonly;
  40
  41     BlockBackend *blk;
  42     SDBus sdbus;
  43
  44     uint32_t status;
  45     uint32_t clkrt;
  46     uint32_t spi;
  47     uint32_t cmdat;
  48     uint32_t resp_tout;
  49     uint32_t read_tout;
  50     int32_t blklen;
  51     int32_t numblk;
  52     uint32_t intmask;
  53     uint32_t intreq;
  54     int32_t cmd;
  55     uint32_t arg;
  56
  57     int32_t active;
  58     int32_t bytesleft;
  59     uint8_t tx_fifo[64];
  60     uint32_t tx_start;
  61     uint32_t tx_len;
  62     uint8_t rx_fifo[32];
  63     uint32_t rx_start;
  64     uint32_t rx_len;
  65     uint16_t resp_fifo[9];
  66     uint32_t resp_len;
  67
  68     int32_t cmdreq;
  69 };
  70
  71 static bool pxa2xx_mmci_vmstate_validate(void *opaque, int version_id)
  72 {
  73     PXA2xxMMCIState *s = opaque;
  74
  75     return s->tx_start < ARRAY_SIZE(s->tx_fifo)
  76         && s->rx_start < ARRAY_SIZE(s->rx_fifo)
  77         && s->tx_len <= ARRAY_SIZE(s->tx_fifo)
  78         && s->rx_len <= ARRAY_SIZE(s->rx_fifo)
  79         && s->resp_len <= ARRAY_SIZE(s->resp_fifo);
  80 }
  81
  82
  83 static const VMStateDescription vmstate_pxa2xx_mmci = {
  84     .name = "pxa2xx-mmci",
  85     .version_id = 2,
  86     .minimum_version_id = 2,
  87     .fields = (VMStateField[]) {
  88         VMSTATE_UINT32(status, PXA2xxMMCIState),
  89         VMSTATE_UINT32(clkrt, PXA2xxMMCIState),
  90         VMSTATE_UINT32(spi, PXA2xxMMCIState),
  91         VMSTATE_UINT32(cmdat, PXA2xxMMCIState),
  92         VMSTATE_UINT32(resp_tout, PXA2xxMMCIState),
  93         VMSTATE_UINT32(read_tout, PXA2xxMMCIState),
  94         VMSTATE_INT32(blklen, PXA2xxMMCIState),
  95         VMSTATE_INT32(numblk, PXA2xxMMCIState),
  96         VMSTATE_UINT32(intmask, PXA2xxMMCIState),
  97         VMSTATE_UINT32(intreq, PXA2xxMMCIState),
  98         VMSTATE_INT32(cmd, PXA2xxMMCIState),
  99         VMSTATE_UINT32(arg, PXA2xxMMCIState),
 100         VMSTATE_INT32(cmdreq, PXA2xxMMCIState),
 101         VMSTATE_INT32(active, PXA2xxMMCIState),
 102         VMSTATE_INT32(bytesleft, PXA2xxMMCIState),
 103         VMSTATE_UINT32(tx_start, PXA2xxMMCIState),
 104         VMSTATE_UINT32(tx_len, PXA2xxMMCIState),
 105         VMSTATE_UINT32(rx_start, PXA2xxMMCIState),
 106         VMSTATE_UINT32(rx_len, PXA2xxMMCIState),
 107         VMSTATE_UINT32(resp_len, PXA2xxMMCIState),
 108         VMSTATE_VALIDATE("fifo size incorrect", pxa2xx_mmci_vmstate_validate),
 109         VMSTATE_UINT8_ARRAY(tx_fifo, PXA2xxMMCIState, 64),
 110         VMSTATE_UINT8_ARRAY(rx_fifo, PXA2xxMMCIState, 32),
 111         VMSTATE_UINT16_ARRAY(resp_fifo, PXA2xxMMCIState, 9),
 112         VMSTATE_END_OF_LIST()
 113     }
 114 };
 115
 116 #define MMC_STRPCL      0x00    /* MMC Clock Start/Stop register */
 117 #define MMC_STAT        0x04    /* MMC Status register */
 118 #define MMC_CLKRT       0x08    /* MMC Clock Rate register */
 119 #define MMC_SPI         0x0c    /* MMC SPI Mode register */
 120 #define MMC_CMDAT       0x10    /* MMC Command/Data register */
 121 #define MMC_RESTO       0x14    /* MMC Response Time-Out register */
 122 #define MMC_RDTO        0x18    /* MMC Read Time-Out register */
 123 #define MMC_BLKLEN      0x1c    /* MMC Block Length register */
 124 #define MMC_NUMBLK      0x20    /* MMC Number of Blocks register */
 125 #define MMC_PRTBUF      0x24    /* MMC Buffer Partly Full register */
 126 #define MMC_I_MASK      0x28    /* MMC Interrupt Mask register */
 127 #define MMC_I_REG       0x2c    /* MMC Interrupt Request register */
 128 #define MMC_CMD         0x30    /* MMC Command register */
 129 #define MMC_ARGH        0x34    /* MMC Argument High register */
 130 #define MMC_ARGL        0x38    /* MMC Argument Low register */
 131 #define MMC_RES         0x3c    /* MMC Response FIFO */
 132 #define MMC_RXFIFO      0x40    /* MMC Receive FIFO */
 133 #define MMC_TXFIFO      0x44    /* MMC Transmit FIFO */
 134 #define MMC_RDWAIT      0x48    /* MMC RD_WAIT register */
 135 #define MMC_BLKS_REM    0x4c    /* MMC Blocks Remaining register */
 136
 137 /* Bitfield masks */
 138 #define STRPCL_STOP_CLK (1 << 0)
 139 #define STRPCL_STRT_CLK (1 << 1)
 140 #define STAT_TOUT_RES   (1 << 1)
 141 #define STAT_CLK_EN     (1 << 8)
 142 #define STAT_DATA_DONE  (1 << 11)
 143 #define STAT_PRG_DONE   (1 << 12)
 144 #define STAT_END_CMDRES (1 << 13)
 145 #define SPI_SPI_MODE    (1 << 0)
 146 #define CMDAT_RES_TYPE  (3 << 0)
 147 #define CMDAT_DATA_EN   (1 << 2)
 148 #define CMDAT_WR_RD     (1 << 3)
 149 #define CMDAT_DMA_EN    (1 << 7)
 150 #define CMDAT_STOP_TRAN (1 << 10)
 151 #define INT_DATA_DONE   (1 << 0)
 152 #define INT_PRG_DONE    (1 << 1)
 153 #define INT_END_CMD     (1 << 2)
 154 #define INT_STOP_CMD    (1 << 3)
 155 #define INT_CLK_OFF     (1 << 4)
 156 #define INT_RXFIFO_REQ  (1 << 5)
 157 #define INT_TXFIFO_REQ  (1 << 6)
 158 #define INT_TINT        (1 << 7)
 159 #define INT_DAT_ERR     (1 << 8)
 160 #define INT_RES_ERR     (1 << 9)
 161 #define INT_RD_STALLED  (1 << 10)
 162 #define INT_SDIO_INT    (1 << 11)
 163 #define INT_SDIO_SACK   (1 << 12)
 164 #define PRTBUF_PRT_BUF  (1 << 0)
 165
 166 /* Route internal interrupt lines to the global IC and DMA */
 167 static void pxa2xx_mmci_int_update(PXA2xxMMCIState *s)
 168 {
 169     uint32_t mask = s->intmask;
 170     if (s->cmdat & CMDAT_DMA_EN) {
 171         mask |= INT_RXFIFO_REQ | INT_TXFIFO_REQ;
 172
 173         qemu_set_irq(s->rx_dma, !!(s->intreq & INT_RXFIFO_REQ));
 174         qemu_set_irq(s->tx_dma, !!(s->intreq & INT_TXFIFO_REQ));
 175     }
 176
 177     qemu_set_irq(s->irq, !!(s->intreq & ~mask));
 178 }
 179
 180 static void pxa2xx_mmci_fifo_update(PXA2xxMMCIState *s)
 181 {
 182     if (!s->active)
 183         return;
 184
 185     if (s->cmdat & CMDAT_WR_RD) {
 186         while (s->bytesleft && s->tx_len) {
 187             sdbus_write_byte(&s->sdbus, s->tx_fifo[s->tx_start++]);
 188             s->tx_start &= 0x1f;
 189             s->tx_len --;
 190             s->bytesleft --;
 191         }
 192         if (s->bytesleft)
 193             s->intreq |= INT_TXFIFO_REQ;
 194     } else
 195         while (s->bytesleft && s->rx_len < 32) {
 196             s->rx_fifo[(s->rx_start + (s->rx_len ++)) & 0x1f] =
 197                 sdbus_read_byte(&s->sdbus);
 198             s->bytesleft --;
 199             s->intreq |= INT_RXFIFO_REQ;
 200         }
 201
 202     if (!s->bytesleft) {
 203         s->active = 0;
 204         s->intreq |= INT_DATA_DONE;
 205         s->status |= STAT_DATA_DONE;
 206
 207         if (s->cmdat & CMDAT_WR_RD) {
 208             s->intreq |= INT_PRG_DONE;
 209             s->status |= STAT_PRG_DONE;
 210         }
 211     }
 212
 213     pxa2xx_mmci_int_update(s);
 214 }
 215
 216 static void pxa2xx_mmci_wakequeues(PXA2xxMMCIState *s)
 217 {
 218     int rsplen, i;
 219     SDRequest request;
 220     uint8_t response[16];
 221
 222     s->active = 1;
 223     s->rx_len = 0;
 224     s->tx_len = 0;
 225     s->cmdreq = 0;
 226
 227     request.cmd = s->cmd;
 228     request.arg = s->arg;
 229     request.crc = 0;    /* FIXME */
 230
 231     rsplen = sdbus_do_command(&s->sdbus, &request, response);
 232     s->intreq |= INT_END_CMD;
 233
 234     memset(s->resp_fifo, 0, sizeof(s->resp_fifo));
 235     switch (s->cmdat & CMDAT_RES_TYPE) {
 236 #define PXAMMCI_RESP(wd, value0, value1)        \
 237         s->resp_fifo[(wd) + 0] |= (value0);     \
 238         s->resp_fifo[(wd) + 1] |= (value1) << 8;
 239     case 0:     /* No response */
 240         goto complete;
 241
 242     case 1:     /* R1, R4, R5 or R6 */
 243         if (rsplen < 4)
 244             goto timeout;
 245         goto complete;
 246
 247     case 2:     /* R2 */
 248         if (rsplen < 16)
 249             goto timeout;
 250         goto complete;
 251
 252     case 3:     /* R3 */
 253         if (rsplen < 4)
 254             goto timeout;
 255         goto complete;
 256
 257     complete:
 258         for (i = 0; rsplen > 0; i ++, rsplen -= 2) {
 259             PXAMMCI_RESP(i, response[i * 2], response[i * 2 + 1]);
 260         }
 261         s->status |= STAT_END_CMDRES;
 262
 263         if (!(s->cmdat & CMDAT_DATA_EN))
 264             s->active = 0;
 265         else
 266             s->bytesleft = s->numblk * s->blklen;
 267
 268         s->resp_len = 0;
 269         break;
 270
 271     timeout:
 272         s->active = 0;
 273         s->status |= STAT_TOUT_RES;
 274         break;
 275     }
 276
 277     pxa2xx_mmci_fifo_update(s);
 278 }
 279
 280 static uint64_t pxa2xx_mmci_read(void *opaque, hwaddr offset, unsigned size)
 281 {
 282     PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
 283     uint32_t ret = 0;
 284
 285     switch (offset) {
 286     case MMC_STRPCL:
 287         break;
 288     case MMC_STAT:
 289         ret = s->status;
 290         break;
 291     case MMC_CLKRT:
 292         ret = s->clkrt;
 293         break;
 294     case MMC_SPI:
 295         ret = s->spi;
 296         break;
 297     case MMC_CMDAT:
 298         ret = s->cmdat;
 299         break;
 300     case MMC_RESTO:
 301         ret = s->resp_tout;
 302         break;
 303     case MMC_RDTO:
 304         ret = s->read_tout;
 305         break;
 306     case MMC_BLKLEN:
 307         ret = s->blklen;
 308         break;
 309     case MMC_NUMBLK:
 310         ret = s->numblk;
 311         break;
 312     case MMC_PRTBUF:
 313         break;
 314     case MMC_I_MASK:
 315         ret = s->intmask;
 316         break;
 317     case MMC_I_REG:
 318         ret = s->intreq;
 319         break;
 320     case MMC_CMD:
 321         ret = s->cmd | 0x40;
 322         break;
 323     case MMC_ARGH:
 324         ret = s->arg >> 16;
 325         break;
 326     case MMC_ARGL:
 327         ret = s->arg & 0xffff;
 328         break;
 329     case MMC_RES:
 330         ret = (s->resp_len < 9) ? s->resp_fifo[s->resp_len++] : 0;
 331         break;
 332     case MMC_RXFIFO:
 333         while (size-- && s->rx_len) {
 334             ret |= s->rx_fifo[s->rx_start++] << (size << 3);
 335             s->rx_start &= 0x1f;
 336             s->rx_len --;
 337         }
 338         s->intreq &= ~INT_RXFIFO_REQ;
 339         pxa2xx_mmci_fifo_update(s);
 340         break;
 341     case MMC_RDWAIT:
 342         break;
 343     case MMC_BLKS_REM:
 344         ret = s->numblk;
 345         break;
 346     default:
 347         qemu_log_mask(LOG_GUEST_ERROR,
 348                       "%s: incorrect register 0x%02" HWADDR_PRIx "\n",
 349                       __func__, offset);
 350     }
 351     trace_pxa2xx_mmci_read(size, offset, ret);
 352
 353     return ret;
 354 }
 355
 356 static void pxa2xx_mmci_write(void *opaque,
 357                               hwaddr offset, uint64_t value, unsigned size)
 358 {
 359     PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
 360
 361     trace_pxa2xx_mmci_write(size, offset, value);
 362     switch (offset) {
 363     case MMC_STRPCL:
 364         if (value & STRPCL_STRT_CLK) {
 365             s->status |= STAT_CLK_EN;
 366             s->intreq &= ~INT_CLK_OFF;
 367
 368             if (s->cmdreq && !(s->cmdat & CMDAT_STOP_TRAN)) {
 369                 s->status &= STAT_CLK_EN;
 370                 pxa2xx_mmci_wakequeues(s);
 371             }
 372         }
 373
 374         if (value & STRPCL_STOP_CLK) {
 375             s->status &= ~STAT_CLK_EN;
 376             s->intreq |= INT_CLK_OFF;
 377             s->active = 0;
 378         }
 379
 380         pxa2xx_mmci_int_update(s);
 381         break;
 382
 383     case MMC_CLKRT:
 384         s->clkrt = value & 7;
 385         break;
 386
 387     case MMC_SPI:
 388         s->spi = value & 0xf;
 389         if (value & SPI_SPI_MODE) {
 390             qemu_log_mask(LOG_GUEST_ERROR,
 391                           "%s: attempted to use card in SPI mode\n", __func__);
 392         }
 393         break;
 394
 395     case MMC_CMDAT:
 396         s->cmdat = value & 0x3dff;
 397         s->active = 0;
 398         s->cmdreq = 1;
 399         if (!(value & CMDAT_STOP_TRAN)) {
 400             s->status &= STAT_CLK_EN;
 401
 402             if (s->status & STAT_CLK_EN)
 403                 pxa2xx_mmci_wakequeues(s);
 404         }
 405
 406         pxa2xx_mmci_int_update(s);
 407         break;
 408
 409     case MMC_RESTO:
 410         s->resp_tout = value & 0x7f;
 411         break;
 412
 413     case MMC_RDTO:
 414         s->read_tout = value & 0xffff;
 415         break;
 416
 417     case MMC_BLKLEN:
 418         s->blklen = value & 0xfff;
 419         break;
 420
 421     case MMC_NUMBLK:
 422         s->numblk = value & 0xffff;
 423         break;
 424
 425     case MMC_PRTBUF:
 426         if (value & PRTBUF_PRT_BUF) {
 427             s->tx_start ^= 32;
 428             s->tx_len = 0;
 429         }
 430         pxa2xx_mmci_fifo_update(s);
 431         break;
 432
 433     case MMC_I_MASK:
 434         s->intmask = value & 0x1fff;
 435         pxa2xx_mmci_int_update(s);
 436         break;
 437
 438     case MMC_CMD:
 439         s->cmd = value & 0x3f;
 440         break;
 441
 442     case MMC_ARGH:
 443         s->arg &= 0x0000ffff;
 444         s->arg |= value << 16;
 445         break;
 446
 447     case MMC_ARGL:
 448         s->arg &= 0xffff0000;
 449         s->arg |= value & 0x0000ffff;
 450         break;
 451
 452     case MMC_TXFIFO:
 453         while (size-- && s->tx_len < 0x20)
 454             s->tx_fifo[(s->tx_start + (s->tx_len ++)) & 0x1f] =
 455                     (value >> (size << 3)) & 0xff;
 456         s->intreq &= ~INT_TXFIFO_REQ;
 457         pxa2xx_mmci_fifo_update(s);
 458         break;
 459
 460     case MMC_RDWAIT:
 461     case MMC_BLKS_REM:
 462         break;
 463
 464     default:
 465         qemu_log_mask(LOG_GUEST_ERROR,
 466                       "%s: incorrect reg 0x%02" HWADDR_PRIx " "
 467                       "(value 0x%08" PRIx64 ")\n", __func__, offset, value);
 468     }
 469 }
 470
 471 static const MemoryRegionOps pxa2xx_mmci_ops = {
 472     .read = pxa2xx_mmci_read,
 473     .write = pxa2xx_mmci_write,
 474     .endianness = DEVICE_NATIVE_ENDIAN,
 475 };
 476
 477 PXA2xxMMCIState *pxa2xx_mmci_init(MemoryRegion *sysmem,
 478                 hwaddr base,
 479                 qemu_irq irq, qemu_irq rx_dma, qemu_irq tx_dma)
 480 {
 481     DeviceState *dev;
 482     SysBusDevice *sbd;
 483
 484     dev = qdev_new(TYPE_PXA2XX_MMCI);
 485     sbd = SYS_BUS_DEVICE(dev);
 486     sysbus_mmio_map(sbd, 0, base);
 487     sysbus_connect_irq(sbd, 0, irq);
 488     qdev_connect_gpio_out_named(dev, "rx-dma", 0, rx_dma);
 489     qdev_connect_gpio_out_named(dev, "tx-dma", 0, tx_dma);
 490     sysbus_realize_and_unref(sbd, &error_fatal);
 491
 492     return PXA2XX_MMCI(dev);
 493 }
 494
 495 static void pxa2xx_mmci_set_inserted(DeviceState *dev, bool inserted)
 496 {
 497     PXA2xxMMCIState *s = PXA2XX_MMCI(dev);
 498
 499     qemu_set_irq(s->inserted, inserted);
 500 }
 501
 502 static void pxa2xx_mmci_set_readonly(DeviceState *dev, bool readonly)
 503 {
 504     PXA2xxMMCIState *s = PXA2XX_MMCI(dev);
 505
 506     qemu_set_irq(s->readonly, readonly);
 507 }
 508
 509 void pxa2xx_mmci_handlers(PXA2xxMMCIState *s, qemu_irq readonly,
 510                           qemu_irq coverswitch)
 511 {
 512     DeviceState *dev = DEVICE(s);
 513
 514     s->readonly = readonly;
 515     s->inserted = coverswitch;
 516
 517     pxa2xx_mmci_set_inserted(dev, sdbus_get_inserted(&s->sdbus));
 518     pxa2xx_mmci_set_readonly(dev, sdbus_get_readonly(&s->sdbus));
 519 }
 520
 521 static void pxa2xx_mmci_reset(DeviceState *d)
 522 {
 523     PXA2xxMMCIState *s = PXA2XX_MMCI(d);
 524
 525     s->status = 0;
 526     s->clkrt = 0;
 527     s->spi = 0;
 528     s->cmdat = 0;
 529     s->resp_tout = 0;
 530     s->read_tout = 0;
 531     s->blklen = 0;
 532     s->numblk = 0;
 533     s->intmask = 0;
 534     s->intreq = 0;
 535     s->cmd = 0;
 536     s->arg = 0;
 537     s->active = 0;
 538     s->bytesleft = 0;
 539     s->tx_start = 0;
 540     s->tx_len = 0;
 541     s->rx_start = 0;
 542     s->rx_len = 0;
 543     s->resp_len = 0;
 544     s->cmdreq = 0;
 545     memset(s->tx_fifo, 0, sizeof(s->tx_fifo));
 546     memset(s->rx_fifo, 0, sizeof(s->rx_fifo));
 547     memset(s->resp_fifo, 0, sizeof(s->resp_fifo));
 548 }
 549
 550 static void pxa2xx_mmci_instance_init(Object *obj)
 551 {
 552     PXA2xxMMCIState *s = PXA2XX_MMCI(obj);
 553     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 554     DeviceState *dev = DEVICE(obj);
 555
 556     memory_region_init_io(&s->iomem, obj, &pxa2xx_mmci_ops, s,
 557                           "pxa2xx-mmci", 0x00100000);
 558     sysbus_init_mmio(sbd, &s->iomem);
 559     sysbus_init_irq(sbd, &s->irq);
 560     qdev_init_gpio_out_named(dev, &s->rx_dma, "rx-dma", 1);
 561     qdev_init_gpio_out_named(dev, &s->tx_dma, "tx-dma", 1);
 562
 563     qbus_create_inplace(&s->sdbus, sizeof(s->sdbus),
 564                         TYPE_PXA2XX_MMCI_BUS, DEVICE(obj), "sd-bus");
 565 }
 566
 567 static void pxa2xx_mmci_class_init(ObjectClass *klass, void *data)
 568 {
 569     DeviceClass *dc = DEVICE_CLASS(klass);
 570
 571     dc->vmsd = &vmstate_pxa2xx_mmci;
 572     dc->reset = pxa2xx_mmci_reset;
 573 }
 574
 575 static void pxa2xx_mmci_bus_class_init(ObjectClass *klass, void *data)
 576 {
 577     SDBusClass *sbc = SD_BUS_CLASS(klass);
 578
 579     sbc->set_inserted = pxa2xx_mmci_set_inserted;
 580     sbc->set_readonly = pxa2xx_mmci_set_readonly;
 581 }
 582
 583 static const TypeInfo pxa2xx_mmci_info = {
 584     .name = TYPE_PXA2XX_MMCI,
 585     .parent = TYPE_SYS_BUS_DEVICE,
 586     .instance_size = sizeof(PXA2xxMMCIState),
 587     .instance_init = pxa2xx_mmci_instance_init,
 588     .class_init = pxa2xx_mmci_class_init,
 589 };
 590
 591 static const TypeInfo pxa2xx_mmci_bus_info = {
 592     .name = TYPE_PXA2XX_MMCI_BUS,
 593     .parent = TYPE_SD_BUS,
 594     .instance_size = sizeof(SDBus),
 595     .class_init = pxa2xx_mmci_bus_class_init,
 596 };
 597
 598 static void pxa2xx_mmci_register_types(void)
 599 {
 600     type_register_static(&pxa2xx_mmci_info);
 601     type_register_static(&pxa2xx_mmci_bus_info);
 602 }
 603
 604 type_init(pxa2xx_mmci_register_types)