2 * SMSC LAN9118 Ethernet interface emulation
4 * Copyright (c) 2009 CodeSourcery, LLC.
5 * Written by Paul Brook
7 * This code is licensed under the GNU GPL v2
9 * Contributions after 2012-01-13 are licensed under the terms of the
10 * GNU GPL, version 2 or (at your option) any later version.
13 #include "qemu/osdep.h"
14 #include "hw/sysbus.h"
16 #include "hw/devices.h"
17 #include "sysemu/sysemu.h"
18 #include "hw/ptimer.h"
22 //#define DEBUG_LAN9118
25 #define DPRINTF(fmt, ...) \
26 do { printf("lan9118: " fmt , ## __VA_ARGS__); } while (0)
27 #define BADF(fmt, ...) \
28 do { hw_error("lan9118: error: " fmt , ## __VA_ARGS__);} while (0)
30 #define DPRINTF(fmt, ...) do {} while(0)
31 #define BADF(fmt, ...) \
32 do { fprintf(stderr, "lan9118: error: " fmt , ## __VA_ARGS__);} while (0)
35 #define CSR_ID_REV 0x50
36 #define CSR_IRQ_CFG 0x54
37 #define CSR_INT_STS 0x58
38 #define CSR_INT_EN 0x5c
39 #define CSR_BYTE_TEST 0x64
40 #define CSR_FIFO_INT 0x68
41 #define CSR_RX_CFG 0x6c
42 #define CSR_TX_CFG 0x70
43 #define CSR_HW_CFG 0x74
44 #define CSR_RX_DP_CTRL 0x78
45 #define CSR_RX_FIFO_INF 0x7c
46 #define CSR_TX_FIFO_INF 0x80
47 #define CSR_PMT_CTRL 0x84
48 #define CSR_GPIO_CFG 0x88
49 #define CSR_GPT_CFG 0x8c
50 #define CSR_GPT_CNT 0x90
51 #define CSR_WORD_SWAP 0x98
52 #define CSR_FREE_RUN 0x9c
53 #define CSR_RX_DROP 0xa0
54 #define CSR_MAC_CSR_CMD 0xa4
55 #define CSR_MAC_CSR_DATA 0xa8
56 #define CSR_AFC_CFG 0xac
57 #define CSR_E2P_CMD 0xb0
58 #define CSR_E2P_DATA 0xb4
60 #define E2P_CMD_MAC_ADDR_LOADED 0x100
63 #define IRQ_INT 0x00001000
64 #define IRQ_EN 0x00000100
65 #define IRQ_POL 0x00000010
66 #define IRQ_TYPE 0x00000001
69 #define SW_INT 0x80000000
70 #define TXSTOP_INT 0x02000000
71 #define RXSTOP_INT 0x01000000
72 #define RXDFH_INT 0x00800000
73 #define TX_IOC_INT 0x00200000
74 #define RXD_INT 0x00100000
75 #define GPT_INT 0x00080000
76 #define PHY_INT 0x00040000
77 #define PME_INT 0x00020000
78 #define TXSO_INT 0x00010000
79 #define RWT_INT 0x00008000
80 #define RXE_INT 0x00004000
81 #define TXE_INT 0x00002000
82 #define TDFU_INT 0x00000800
83 #define TDFO_INT 0x00000400
84 #define TDFA_INT 0x00000200
85 #define TSFF_INT 0x00000100
86 #define TSFL_INT 0x00000080
87 #define RXDF_INT 0x00000040
88 #define RDFL_INT 0x00000020
89 #define RSFF_INT 0x00000010
90 #define RSFL_INT 0x00000008
91 #define GPIO2_INT 0x00000004
92 #define GPIO1_INT 0x00000002
93 #define GPIO0_INT 0x00000001
94 #define RESERVED_INT 0x7c001000
101 #define MAC_MII_ACC 6
102 #define MAC_MII_DATA 7
104 #define MAC_VLAN1 9 /* TODO */
105 #define MAC_VLAN2 10 /* TODO */
106 #define MAC_WUFF 11 /* TODO */
107 #define MAC_WUCSR 12 /* TODO */
109 #define MAC_CR_RXALL 0x80000000
110 #define MAC_CR_RCVOWN 0x00800000
111 #define MAC_CR_LOOPBK 0x00200000
112 #define MAC_CR_FDPX 0x00100000
113 #define MAC_CR_MCPAS 0x00080000
114 #define MAC_CR_PRMS 0x00040000
115 #define MAC_CR_INVFILT 0x00020000
116 #define MAC_CR_PASSBAD 0x00010000
117 #define MAC_CR_HO 0x00008000
118 #define MAC_CR_HPFILT 0x00002000
119 #define MAC_CR_LCOLL 0x00001000
120 #define MAC_CR_BCAST 0x00000800
121 #define MAC_CR_DISRTY 0x00000400
122 #define MAC_CR_PADSTR 0x00000100
123 #define MAC_CR_BOLMT 0x000000c0
124 #define MAC_CR_DFCHK 0x00000020
125 #define MAC_CR_TXEN 0x00000008
126 #define MAC_CR_RXEN 0x00000004
127 #define MAC_CR_RESERVED 0x7f404213
129 #define PHY_INT_ENERGYON 0x80
130 #define PHY_INT_AUTONEG_COMPLETE 0x40
131 #define PHY_INT_FAULT 0x20
132 #define PHY_INT_DOWN 0x10
133 #define PHY_INT_AUTONEG_LP 0x08
134 #define PHY_INT_PARFAULT 0x04
135 #define PHY_INT_AUTONEG_PAGE 0x02
137 #define GPT_TIMER_EN 0x20000000
146 /* state is a tx_state but we can't put enums in VMStateDescriptions. */
158 static const VMStateDescription vmstate_lan9118_packet
= {
159 .name
= "lan9118_packet",
161 .minimum_version_id
= 1,
162 .fields
= (VMStateField
[]) {
163 VMSTATE_UINT32(state
, LAN9118Packet
),
164 VMSTATE_UINT32(cmd_a
, LAN9118Packet
),
165 VMSTATE_UINT32(cmd_b
, LAN9118Packet
),
166 VMSTATE_INT32(buffer_size
, LAN9118Packet
),
167 VMSTATE_INT32(offset
, LAN9118Packet
),
168 VMSTATE_INT32(pad
, LAN9118Packet
),
169 VMSTATE_INT32(fifo_used
, LAN9118Packet
),
170 VMSTATE_INT32(len
, LAN9118Packet
),
171 VMSTATE_UINT8_ARRAY(data
, LAN9118Packet
, 2048),
172 VMSTATE_END_OF_LIST()
176 #define TYPE_LAN9118 "lan9118"
177 #define LAN9118(obj) OBJECT_CHECK(lan9118_state, (obj), TYPE_LAN9118)
180 SysBusDevice parent_obj
;
199 uint32_t free_timer_start
;
209 uint32_t mac_mii_acc
;
210 uint32_t mac_mii_data
;
214 uint32_t phy_control
;
215 uint32_t phy_advertise
;
217 uint32_t phy_int_mask
;
219 int32_t eeprom_writable
;
222 int32_t tx_fifo_size
;
224 LAN9118Packet tx_packet
;
226 int32_t tx_status_fifo_used
;
227 int32_t tx_status_fifo_head
;
228 uint32_t tx_status_fifo
[512];
230 int32_t rx_status_fifo_size
;
231 int32_t rx_status_fifo_used
;
232 int32_t rx_status_fifo_head
;
233 uint32_t rx_status_fifo
[896];
234 int32_t rx_fifo_size
;
235 int32_t rx_fifo_used
;
236 int32_t rx_fifo_head
;
237 uint32_t rx_fifo
[3360];
238 int32_t rx_packet_size_head
;
239 int32_t rx_packet_size_tail
;
240 int32_t rx_packet_size
[1024];
246 uint32_t write_word_prev_offset
;
247 uint32_t write_word_n
;
248 uint16_t write_word_l
;
249 uint16_t write_word_h
;
250 uint32_t read_word_prev_offset
;
251 uint32_t read_word_n
;
257 static const VMStateDescription vmstate_lan9118
= {
260 .minimum_version_id
= 1,
261 .fields
= (VMStateField
[]) {
262 VMSTATE_PTIMER(timer
, lan9118_state
),
263 VMSTATE_UINT32(irq_cfg
, lan9118_state
),
264 VMSTATE_UINT32(int_sts
, lan9118_state
),
265 VMSTATE_UINT32(int_en
, lan9118_state
),
266 VMSTATE_UINT32(fifo_int
, lan9118_state
),
267 VMSTATE_UINT32(rx_cfg
, lan9118_state
),
268 VMSTATE_UINT32(tx_cfg
, lan9118_state
),
269 VMSTATE_UINT32(hw_cfg
, lan9118_state
),
270 VMSTATE_UINT32(pmt_ctrl
, lan9118_state
),
271 VMSTATE_UINT32(gpio_cfg
, lan9118_state
),
272 VMSTATE_UINT32(gpt_cfg
, lan9118_state
),
273 VMSTATE_UINT32(word_swap
, lan9118_state
),
274 VMSTATE_UINT32(free_timer_start
, lan9118_state
),
275 VMSTATE_UINT32(mac_cmd
, lan9118_state
),
276 VMSTATE_UINT32(mac_data
, lan9118_state
),
277 VMSTATE_UINT32(afc_cfg
, lan9118_state
),
278 VMSTATE_UINT32(e2p_cmd
, lan9118_state
),
279 VMSTATE_UINT32(e2p_data
, lan9118_state
),
280 VMSTATE_UINT32(mac_cr
, lan9118_state
),
281 VMSTATE_UINT32(mac_hashh
, lan9118_state
),
282 VMSTATE_UINT32(mac_hashl
, lan9118_state
),
283 VMSTATE_UINT32(mac_mii_acc
, lan9118_state
),
284 VMSTATE_UINT32(mac_mii_data
, lan9118_state
),
285 VMSTATE_UINT32(mac_flow
, lan9118_state
),
286 VMSTATE_UINT32(phy_status
, lan9118_state
),
287 VMSTATE_UINT32(phy_control
, lan9118_state
),
288 VMSTATE_UINT32(phy_advertise
, lan9118_state
),
289 VMSTATE_UINT32(phy_int
, lan9118_state
),
290 VMSTATE_UINT32(phy_int_mask
, lan9118_state
),
291 VMSTATE_INT32(eeprom_writable
, lan9118_state
),
292 VMSTATE_UINT8_ARRAY(eeprom
, lan9118_state
, 128),
293 VMSTATE_INT32(tx_fifo_size
, lan9118_state
),
294 /* txp always points at tx_packet so need not be saved */
295 VMSTATE_STRUCT(tx_packet
, lan9118_state
, 0,
296 vmstate_lan9118_packet
, LAN9118Packet
),
297 VMSTATE_INT32(tx_status_fifo_used
, lan9118_state
),
298 VMSTATE_INT32(tx_status_fifo_head
, lan9118_state
),
299 VMSTATE_UINT32_ARRAY(tx_status_fifo
, lan9118_state
, 512),
300 VMSTATE_INT32(rx_status_fifo_size
, lan9118_state
),
301 VMSTATE_INT32(rx_status_fifo_used
, lan9118_state
),
302 VMSTATE_INT32(rx_status_fifo_head
, lan9118_state
),
303 VMSTATE_UINT32_ARRAY(rx_status_fifo
, lan9118_state
, 896),
304 VMSTATE_INT32(rx_fifo_size
, lan9118_state
),
305 VMSTATE_INT32(rx_fifo_used
, lan9118_state
),
306 VMSTATE_INT32(rx_fifo_head
, lan9118_state
),
307 VMSTATE_UINT32_ARRAY(rx_fifo
, lan9118_state
, 3360),
308 VMSTATE_INT32(rx_packet_size_head
, lan9118_state
),
309 VMSTATE_INT32(rx_packet_size_tail
, lan9118_state
),
310 VMSTATE_INT32_ARRAY(rx_packet_size
, lan9118_state
, 1024),
311 VMSTATE_INT32(rxp_offset
, lan9118_state
),
312 VMSTATE_INT32(rxp_size
, lan9118_state
),
313 VMSTATE_INT32(rxp_pad
, lan9118_state
),
314 VMSTATE_UINT32_V(write_word_prev_offset
, lan9118_state
, 2),
315 VMSTATE_UINT32_V(write_word_n
, lan9118_state
, 2),
316 VMSTATE_UINT16_V(write_word_l
, lan9118_state
, 2),
317 VMSTATE_UINT16_V(write_word_h
, lan9118_state
, 2),
318 VMSTATE_UINT32_V(read_word_prev_offset
, lan9118_state
, 2),
319 VMSTATE_UINT32_V(read_word_n
, lan9118_state
, 2),
320 VMSTATE_UINT32_V(read_long
, lan9118_state
, 2),
321 VMSTATE_UINT32_V(mode_16bit
, lan9118_state
, 2),
322 VMSTATE_END_OF_LIST()
326 static void lan9118_update(lan9118_state
*s
)
330 /* TODO: Implement FIFO level IRQs. */
331 level
= (s
->int_sts
& s
->int_en
) != 0;
333 s
->irq_cfg
|= IRQ_INT
;
335 s
->irq_cfg
&= ~IRQ_INT
;
337 if ((s
->irq_cfg
& IRQ_EN
) == 0) {
340 if ((s
->irq_cfg
& (IRQ_TYPE
| IRQ_POL
)) != (IRQ_TYPE
| IRQ_POL
)) {
341 /* Interrupt is active low unless we're configured as
342 * active-high polarity, push-pull type.
346 qemu_set_irq(s
->irq
, level
);
349 static void lan9118_mac_changed(lan9118_state
*s
)
351 qemu_format_nic_info_str(qemu_get_queue(s
->nic
), s
->conf
.macaddr
.a
);
354 static void lan9118_reload_eeprom(lan9118_state
*s
)
357 if (s
->eeprom
[0] != 0xa5) {
358 s
->e2p_cmd
&= ~E2P_CMD_MAC_ADDR_LOADED
;
359 DPRINTF("MACADDR load failed\n");
362 for (i
= 0; i
< 6; i
++) {
363 s
->conf
.macaddr
.a
[i
] = s
->eeprom
[i
+ 1];
365 s
->e2p_cmd
|= E2P_CMD_MAC_ADDR_LOADED
;
366 DPRINTF("MACADDR loaded from eeprom\n");
367 lan9118_mac_changed(s
);
370 static void phy_update_irq(lan9118_state
*s
)
372 if (s
->phy_int
& s
->phy_int_mask
) {
373 s
->int_sts
|= PHY_INT
;
375 s
->int_sts
&= ~PHY_INT
;
380 static void phy_update_link(lan9118_state
*s
)
382 /* Autonegotiation status mirrors link status. */
383 if (qemu_get_queue(s
->nic
)->link_down
) {
384 s
->phy_status
&= ~0x0024;
385 s
->phy_int
|= PHY_INT_DOWN
;
387 s
->phy_status
|= 0x0024;
388 s
->phy_int
|= PHY_INT_ENERGYON
;
389 s
->phy_int
|= PHY_INT_AUTONEG_COMPLETE
;
394 static void lan9118_set_link(NetClientState
*nc
)
396 phy_update_link(qemu_get_nic_opaque(nc
));
399 static void phy_reset(lan9118_state
*s
)
401 s
->phy_status
= 0x7809;
402 s
->phy_control
= 0x3000;
403 s
->phy_advertise
= 0x01e1;
409 static void lan9118_reset(DeviceState
*d
)
411 lan9118_state
*s
= LAN9118(d
);
413 s
->irq_cfg
&= (IRQ_TYPE
| IRQ_POL
);
416 s
->fifo_int
= 0x48000000;
419 s
->hw_cfg
= s
->mode_16bit
? 0x00050000 : 0x00050004;
422 s
->txp
->fifo_used
= 0;
423 s
->txp
->state
= TX_IDLE
;
424 s
->txp
->cmd_a
= 0xffffffffu
;
425 s
->txp
->cmd_b
= 0xffffffffu
;
427 s
->txp
->fifo_used
= 0;
428 s
->tx_fifo_size
= 4608;
429 s
->tx_status_fifo_used
= 0;
430 s
->rx_status_fifo_size
= 704;
431 s
->rx_fifo_size
= 2640;
433 s
->rx_status_fifo_size
= 176;
434 s
->rx_status_fifo_used
= 0;
438 s
->rx_packet_size_tail
= s
->rx_packet_size_head
;
439 s
->rx_packet_size
[s
->rx_packet_size_head
] = 0;
445 s
->free_timer_start
= qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL
) / 40;
447 ptimer_stop(s
->timer
);
448 ptimer_set_count(s
->timer
, 0xffff);
451 s
->mac_cr
= MAC_CR_PRMS
;
463 s
->eeprom_writable
= 0;
464 lan9118_reload_eeprom(s
);
467 static void rx_fifo_push(lan9118_state
*s
, uint32_t val
)
470 fifo_pos
= s
->rx_fifo_head
+ s
->rx_fifo_used
;
471 if (fifo_pos
>= s
->rx_fifo_size
)
472 fifo_pos
-= s
->rx_fifo_size
;
473 s
->rx_fifo
[fifo_pos
] = val
;
477 /* Return nonzero if the packet is accepted by the filter. */
478 static int lan9118_filter(lan9118_state
*s
, const uint8_t *addr
)
483 if (s
->mac_cr
& MAC_CR_PRMS
) {
486 if (addr
[0] == 0xff && addr
[1] == 0xff && addr
[2] == 0xff &&
487 addr
[3] == 0xff && addr
[4] == 0xff && addr
[5] == 0xff) {
488 return (s
->mac_cr
& MAC_CR_BCAST
) == 0;
491 multicast
= addr
[0] & 1;
492 if (multicast
&&s
->mac_cr
& MAC_CR_MCPAS
) {
495 if (multicast
? (s
->mac_cr
& MAC_CR_HPFILT
) == 0
496 : (s
->mac_cr
& MAC_CR_HO
) == 0) {
497 /* Exact matching. */
498 hash
= memcmp(addr
, s
->conf
.macaddr
.a
, 6);
499 if (s
->mac_cr
& MAC_CR_INVFILT
) {
506 hash
= compute_mcast_idx(addr
);
508 return (s
->mac_hashh
>> (hash
& 0x1f)) & 1;
510 return (s
->mac_hashl
>> (hash
& 0x1f)) & 1;
515 static ssize_t
lan9118_receive(NetClientState
*nc
, const uint8_t *buf
,
518 lan9118_state
*s
= qemu_get_nic_opaque(nc
);
528 if ((s
->mac_cr
& MAC_CR_RXEN
) == 0) {
532 if (size
>= 2048 || size
< 14) {
536 /* TODO: Implement FIFO overflow notification. */
537 if (s
->rx_status_fifo_used
== s
->rx_status_fifo_size
) {
541 filter
= lan9118_filter(s
, buf
);
542 if (!filter
&& (s
->mac_cr
& MAC_CR_RXALL
) == 0) {
546 offset
= (s
->rx_cfg
>> 8) & 0x1f;
548 fifo_len
= (size
+ n
+ 3) >> 2;
549 /* Add a word for the CRC. */
551 if (s
->rx_fifo_size
- s
->rx_fifo_used
< fifo_len
) {
555 DPRINTF("Got packet len:%d fifo:%d filter:%s\n",
556 (int)size
, fifo_len
, filter
? "pass" : "fail");
558 crc
= bswap32(crc32(~0, buf
, size
));
559 for (src_pos
= 0; src_pos
< size
; src_pos
++) {
560 val
= (val
>> 8) | ((uint32_t)buf
[src_pos
] << 24);
564 rx_fifo_push(s
, val
);
569 val
>>= ((4 - n
) * 8);
570 val
|= crc
<< (n
* 8);
571 rx_fifo_push(s
, val
);
572 val
= crc
>> ((4 - n
) * 8);
573 rx_fifo_push(s
, val
);
575 rx_fifo_push(s
, crc
);
577 n
= s
->rx_status_fifo_head
+ s
->rx_status_fifo_used
;
578 if (n
>= s
->rx_status_fifo_size
) {
579 n
-= s
->rx_status_fifo_size
;
581 s
->rx_packet_size
[s
->rx_packet_size_tail
] = fifo_len
;
582 s
->rx_packet_size_tail
= (s
->rx_packet_size_tail
+ 1023) & 1023;
583 s
->rx_status_fifo_used
++;
585 status
= (size
+ 4) << 16;
586 if (buf
[0] == 0xff && buf
[1] == 0xff && buf
[2] == 0xff &&
587 buf
[3] == 0xff && buf
[4] == 0xff && buf
[5] == 0xff) {
588 status
|= 0x00002000;
589 } else if (buf
[0] & 1) {
590 status
|= 0x00000400;
593 status
|= 0x40000000;
595 s
->rx_status_fifo
[n
] = status
;
597 if (s
->rx_status_fifo_used
> (s
->fifo_int
& 0xff)) {
598 s
->int_sts
|= RSFL_INT
;
605 static uint32_t rx_fifo_pop(lan9118_state
*s
)
610 if (s
->rxp_size
== 0 && s
->rxp_pad
== 0) {
611 s
->rxp_size
= s
->rx_packet_size
[s
->rx_packet_size_head
];
612 s
->rx_packet_size
[s
->rx_packet_size_head
] = 0;
613 if (s
->rxp_size
!= 0) {
614 s
->rx_packet_size_head
= (s
->rx_packet_size_head
+ 1023) & 1023;
615 s
->rxp_offset
= (s
->rx_cfg
>> 10) & 7;
616 n
= s
->rxp_offset
+ s
->rxp_size
;
617 switch (s
->rx_cfg
>> 30) {
629 DPRINTF("Pop packet size:%d offset:%d pad: %d\n",
630 s
->rxp_size
, s
->rxp_offset
, s
->rxp_pad
);
633 if (s
->rxp_offset
> 0) {
636 } else if (s
->rxp_size
> 0) {
638 val
= s
->rx_fifo
[s
->rx_fifo_head
++];
639 if (s
->rx_fifo_head
>= s
->rx_fifo_size
) {
640 s
->rx_fifo_head
-= s
->rx_fifo_size
;
643 } else if (s
->rxp_pad
> 0) {
647 DPRINTF("RX underflow\n");
648 s
->int_sts
|= RXE_INT
;
655 static void do_tx_packet(lan9118_state
*s
)
660 /* FIXME: Honor TX disable, and allow queueing of packets. */
661 if (s
->phy_control
& 0x4000) {
662 /* This assumes the receive routine doesn't touch the VLANClient. */
663 lan9118_receive(qemu_get_queue(s
->nic
), s
->txp
->data
, s
->txp
->len
);
665 qemu_send_packet(qemu_get_queue(s
->nic
), s
->txp
->data
, s
->txp
->len
);
667 s
->txp
->fifo_used
= 0;
669 if (s
->tx_status_fifo_used
== 512) {
670 /* Status FIFO full */
673 /* Add entry to status FIFO. */
674 status
= s
->txp
->cmd_b
& 0xffff0000u
;
675 DPRINTF("Sent packet tag:%04x len %d\n", status
>> 16, s
->txp
->len
);
676 n
= (s
->tx_status_fifo_head
+ s
->tx_status_fifo_used
) & 511;
677 s
->tx_status_fifo
[n
] = status
;
678 s
->tx_status_fifo_used
++;
679 if (s
->tx_status_fifo_used
== 512) {
680 s
->int_sts
|= TSFF_INT
;
681 /* TODO: Stop transmission. */
685 static uint32_t rx_status_fifo_pop(lan9118_state
*s
)
689 val
= s
->rx_status_fifo
[s
->rx_status_fifo_head
];
690 if (s
->rx_status_fifo_used
!= 0) {
691 s
->rx_status_fifo_used
--;
692 s
->rx_status_fifo_head
++;
693 if (s
->rx_status_fifo_head
>= s
->rx_status_fifo_size
) {
694 s
->rx_status_fifo_head
-= s
->rx_status_fifo_size
;
696 /* ??? What value should be returned when the FIFO is empty? */
697 DPRINTF("RX status pop 0x%08x\n", val
);
702 static uint32_t tx_status_fifo_pop(lan9118_state
*s
)
706 val
= s
->tx_status_fifo
[s
->tx_status_fifo_head
];
707 if (s
->tx_status_fifo_used
!= 0) {
708 s
->tx_status_fifo_used
--;
709 s
->tx_status_fifo_head
= (s
->tx_status_fifo_head
+ 1) & 511;
710 /* ??? What value should be returned when the FIFO is empty? */
715 static void tx_fifo_push(lan9118_state
*s
, uint32_t val
)
719 if (s
->txp
->fifo_used
== s
->tx_fifo_size
) {
720 s
->int_sts
|= TDFO_INT
;
723 switch (s
->txp
->state
) {
725 s
->txp
->cmd_a
= val
& 0x831f37ff;
727 s
->txp
->state
= TX_B
;
728 s
->txp
->buffer_size
= extract32(s
->txp
->cmd_a
, 0, 11);
729 s
->txp
->offset
= extract32(s
->txp
->cmd_a
, 16, 5);
732 if (s
->txp
->cmd_a
& 0x2000) {
736 /* End alignment does not include command words. */
737 n
= (s
->txp
->buffer_size
+ s
->txp
->offset
+ 3) >> 2;
738 switch ((n
>> 24) & 3) {
751 DPRINTF("Block len:%d offset:%d pad:%d cmd %08x\n",
752 s
->txp
->buffer_size
, s
->txp
->offset
, s
->txp
->pad
,
754 s
->txp
->state
= TX_DATA
;
757 if (s
->txp
->offset
>= 4) {
761 if (s
->txp
->buffer_size
<= 0 && s
->txp
->pad
!= 0) {
764 n
= MIN(4, s
->txp
->buffer_size
+ s
->txp
->offset
);
765 while (s
->txp
->offset
) {
770 /* Documentation is somewhat unclear on the ordering of bytes
771 in FIFO words. Empirical results show it to be little-endian.
773 /* TODO: FIFO overflow checking. */
775 s
->txp
->data
[s
->txp
->len
] = val
& 0xff;
778 s
->txp
->buffer_size
--;
782 if (s
->txp
->buffer_size
<= 0 && s
->txp
->pad
== 0) {
783 if (s
->txp
->cmd_a
& 0x1000) {
786 if (s
->txp
->cmd_a
& 0x80000000) {
787 s
->int_sts
|= TX_IOC_INT
;
789 s
->txp
->state
= TX_IDLE
;
795 static uint32_t do_phy_read(lan9118_state
*s
, int reg
)
800 case 0: /* Basic Control */
801 return s
->phy_control
;
802 case 1: /* Basic Status */
803 return s
->phy_status
;
808 case 4: /* Auto-neg advertisement */
809 return s
->phy_advertise
;
810 case 5: /* Auto-neg Link Partner Ability */
812 case 6: /* Auto-neg Expansion */
814 /* TODO 17, 18, 27, 29, 30, 31 */
815 case 29: /* Interrupt source. */
820 case 30: /* Interrupt mask */
821 return s
->phy_int_mask
;
823 BADF("PHY read reg %d\n", reg
);
828 static void do_phy_write(lan9118_state
*s
, int reg
, uint32_t val
)
831 case 0: /* Basic Control */
836 s
->phy_control
= val
& 0x7980;
837 /* Complete autonegotiation immediately. */
839 s
->phy_status
|= 0x0020;
842 case 4: /* Auto-neg advertisement */
843 s
->phy_advertise
= (val
& 0x2d7f) | 0x80;
845 /* TODO 17, 18, 27, 31 */
846 case 30: /* Interrupt mask */
847 s
->phy_int_mask
= val
& 0xff;
851 BADF("PHY write reg %d = 0x%04x\n", reg
, val
);
855 static void do_mac_write(lan9118_state
*s
, int reg
, uint32_t val
)
859 if ((s
->mac_cr
& MAC_CR_RXEN
) != 0 && (val
& MAC_CR_RXEN
) == 0) {
860 s
->int_sts
|= RXSTOP_INT
;
862 s
->mac_cr
= val
& ~MAC_CR_RESERVED
;
863 DPRINTF("MAC_CR: %08x\n", val
);
866 s
->conf
.macaddr
.a
[4] = val
& 0xff;
867 s
->conf
.macaddr
.a
[5] = (val
>> 8) & 0xff;
868 lan9118_mac_changed(s
);
871 s
->conf
.macaddr
.a
[0] = val
& 0xff;
872 s
->conf
.macaddr
.a
[1] = (val
>> 8) & 0xff;
873 s
->conf
.macaddr
.a
[2] = (val
>> 16) & 0xff;
874 s
->conf
.macaddr
.a
[3] = (val
>> 24) & 0xff;
875 lan9118_mac_changed(s
);
884 s
->mac_mii_acc
= val
& 0xffc2;
886 DPRINTF("PHY write %d = 0x%04x\n",
887 (val
>> 6) & 0x1f, s
->mac_mii_data
);
888 do_phy_write(s
, (val
>> 6) & 0x1f, s
->mac_mii_data
);
890 s
->mac_mii_data
= do_phy_read(s
, (val
>> 6) & 0x1f);
891 DPRINTF("PHY read %d = 0x%04x\n",
892 (val
>> 6) & 0x1f, s
->mac_mii_data
);
896 s
->mac_mii_data
= val
& 0xffff;
899 s
->mac_flow
= val
& 0xffff0000;
902 /* Writing to this register changes a condition for
903 * FrameTooLong bit in rx_status. Since we do not set
904 * FrameTooLong anyway, just ignore write to this.
908 qemu_log_mask(LOG_GUEST_ERROR
,
909 "lan9118: Unimplemented MAC register write: %d = 0x%x\n",
910 s
->mac_cmd
& 0xf, val
);
914 static uint32_t do_mac_read(lan9118_state
*s
, int reg
)
920 return s
->conf
.macaddr
.a
[4] | (s
->conf
.macaddr
.a
[5] << 8);
922 return s
->conf
.macaddr
.a
[0] | (s
->conf
.macaddr
.a
[1] << 8)
923 | (s
->conf
.macaddr
.a
[2] << 16) | (s
->conf
.macaddr
.a
[3] << 24);
931 return s
->mac_mii_acc
;
933 return s
->mac_mii_data
;
937 qemu_log_mask(LOG_GUEST_ERROR
,
938 "lan9118: Unimplemented MAC register read: %d\n",
944 static void lan9118_eeprom_cmd(lan9118_state
*s
, int cmd
, int addr
)
946 s
->e2p_cmd
= (s
->e2p_cmd
& E2P_CMD_MAC_ADDR_LOADED
) | (cmd
<< 28) | addr
;
949 s
->e2p_data
= s
->eeprom
[addr
];
950 DPRINTF("EEPROM Read %d = 0x%02x\n", addr
, s
->e2p_data
);
953 s
->eeprom_writable
= 0;
954 DPRINTF("EEPROM Write Disable\n");
957 s
->eeprom_writable
= 1;
958 DPRINTF("EEPROM Write Enable\n");
961 if (s
->eeprom_writable
) {
962 s
->eeprom
[addr
] &= s
->e2p_data
;
963 DPRINTF("EEPROM Write %d = 0x%02x\n", addr
, s
->e2p_data
);
965 DPRINTF("EEPROM Write %d (ignored)\n", addr
);
969 if (s
->eeprom_writable
) {
970 for (addr
= 0; addr
< 128; addr
++) {
971 s
->eeprom
[addr
] &= s
->e2p_data
;
973 DPRINTF("EEPROM Write All 0x%02x\n", s
->e2p_data
);
975 DPRINTF("EEPROM Write All (ignored)\n");
979 if (s
->eeprom_writable
) {
980 s
->eeprom
[addr
] = 0xff;
981 DPRINTF("EEPROM Erase %d\n", addr
);
983 DPRINTF("EEPROM Erase %d (ignored)\n", addr
);
987 if (s
->eeprom_writable
) {
988 memset(s
->eeprom
, 0xff, 128);
989 DPRINTF("EEPROM Erase All\n");
991 DPRINTF("EEPROM Erase All (ignored)\n");
995 lan9118_reload_eeprom(s
);
1000 static void lan9118_tick(void *opaque
)
1002 lan9118_state
*s
= (lan9118_state
*)opaque
;
1003 if (s
->int_en
& GPT_INT
) {
1004 s
->int_sts
|= GPT_INT
;
1009 static void lan9118_writel(void *opaque
, hwaddr offset
,
1010 uint64_t val
, unsigned size
)
1012 lan9118_state
*s
= (lan9118_state
*)opaque
;
1015 //DPRINTF("Write reg 0x%02x = 0x%08x\n", (int)offset, val);
1016 if (offset
>= 0x20 && offset
< 0x40) {
1018 tx_fifo_push(s
, val
);
1023 /* TODO: Implement interrupt deassertion intervals. */
1024 val
&= (IRQ_EN
| IRQ_POL
| IRQ_TYPE
);
1025 s
->irq_cfg
= (s
->irq_cfg
& IRQ_INT
) | val
;
1031 s
->int_en
= val
& ~RESERVED_INT
;
1032 s
->int_sts
|= val
& SW_INT
;
1035 DPRINTF("FIFO INT levels %08x\n", val
);
1041 s
->rx_fifo_used
= 0;
1042 s
->rx_status_fifo_used
= 0;
1043 s
->rx_packet_size_tail
= s
->rx_packet_size_head
;
1044 s
->rx_packet_size
[s
->rx_packet_size_head
] = 0;
1046 s
->rx_cfg
= val
& 0xcfff1ff0;
1050 s
->tx_status_fifo_used
= 0;
1053 s
->txp
->state
= TX_IDLE
;
1054 s
->txp
->fifo_used
= 0;
1055 s
->txp
->cmd_a
= 0xffffffff;
1057 s
->tx_cfg
= val
& 6;
1062 lan9118_reset(DEVICE(s
));
1064 s
->hw_cfg
= (val
& 0x003f300) | (s
->hw_cfg
& 0x4);
1067 case CSR_RX_DP_CTRL
:
1068 if (val
& 0x80000000) {
1069 /* Skip forward to next packet. */
1072 if (s
->rxp_size
== 0) {
1073 /* Pop a word to start the next packet. */
1078 s
->rx_fifo_head
+= s
->rxp_size
;
1079 if (s
->rx_fifo_head
>= s
->rx_fifo_size
) {
1080 s
->rx_fifo_head
-= s
->rx_fifo_size
;
1088 s
->pmt_ctrl
&= ~0x34e;
1089 s
->pmt_ctrl
|= (val
& 0x34e);
1092 /* Probably just enabling LEDs. */
1093 s
->gpio_cfg
= val
& 0x7777071f;
1096 if ((s
->gpt_cfg
^ val
) & GPT_TIMER_EN
) {
1097 if (val
& GPT_TIMER_EN
) {
1098 ptimer_set_count(s
->timer
, val
& 0xffff);
1099 ptimer_run(s
->timer
, 0);
1101 ptimer_stop(s
->timer
);
1102 ptimer_set_count(s
->timer
, 0xffff);
1105 s
->gpt_cfg
= val
& (GPT_TIMER_EN
| 0xffff);
1108 /* Ignored because we're in 32-bit mode. */
1111 case CSR_MAC_CSR_CMD
:
1112 s
->mac_cmd
= val
& 0x4000000f;
1113 if (val
& 0x80000000) {
1114 if (val
& 0x40000000) {
1115 s
->mac_data
= do_mac_read(s
, val
& 0xf);
1116 DPRINTF("MAC read %d = 0x%08x\n", val
& 0xf, s
->mac_data
);
1118 DPRINTF("MAC write %d = 0x%08x\n", val
& 0xf, s
->mac_data
);
1119 do_mac_write(s
, val
& 0xf, s
->mac_data
);
1123 case CSR_MAC_CSR_DATA
:
1127 s
->afc_cfg
= val
& 0x00ffffff;
1130 lan9118_eeprom_cmd(s
, (val
>> 28) & 7, val
& 0x7f);
1133 s
->e2p_data
= val
& 0xff;
1137 qemu_log_mask(LOG_GUEST_ERROR
, "lan9118_write: Bad reg 0x%x = %x\n",
1138 (int)offset
, (int)val
);
1144 static void lan9118_writew(void *opaque
, hwaddr offset
,
1147 lan9118_state
*s
= (lan9118_state
*)opaque
;
1150 if (s
->write_word_prev_offset
!= (offset
& ~0x3)) {
1151 /* New offset, reset word counter */
1152 s
->write_word_n
= 0;
1153 s
->write_word_prev_offset
= offset
& ~0x3;
1157 s
->write_word_h
= val
;
1159 s
->write_word_l
= val
;
1162 //DPRINTF("Writew reg 0x%02x = 0x%08x\n", (int)offset, val);
1164 if (s
->write_word_n
== 2) {
1165 s
->write_word_n
= 0;
1166 lan9118_writel(s
, offset
& ~3, s
->write_word_l
+
1167 (s
->write_word_h
<< 16), 4);
1171 static void lan9118_16bit_mode_write(void *opaque
, hwaddr offset
,
1172 uint64_t val
, unsigned size
)
1176 lan9118_writew(opaque
, offset
, (uint32_t)val
);
1179 lan9118_writel(opaque
, offset
, val
, size
);
1183 hw_error("lan9118_write: Bad size 0x%x\n", size
);
1186 static uint64_t lan9118_readl(void *opaque
, hwaddr offset
,
1189 lan9118_state
*s
= (lan9118_state
*)opaque
;
1191 //DPRINTF("Read reg 0x%02x\n", (int)offset);
1192 if (offset
< 0x20) {
1194 return rx_fifo_pop(s
);
1198 return rx_status_fifo_pop(s
);
1200 return s
->rx_status_fifo
[s
->tx_status_fifo_head
];
1202 return tx_status_fifo_pop(s
);
1204 return s
->tx_status_fifo
[s
->tx_status_fifo_head
];
1223 case CSR_RX_DP_CTRL
:
1225 case CSR_RX_FIFO_INF
:
1226 return (s
->rx_status_fifo_used
<< 16) | (s
->rx_fifo_used
<< 2);
1227 case CSR_TX_FIFO_INF
:
1228 return (s
->tx_status_fifo_used
<< 16)
1229 | (s
->tx_fifo_size
- s
->txp
->fifo_used
);
1237 return ptimer_get_count(s
->timer
);
1239 return s
->word_swap
;
1241 return (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL
) / 40) - s
->free_timer_start
;
1243 /* TODO: Implement dropped frames counter. */
1245 case CSR_MAC_CSR_CMD
:
1247 case CSR_MAC_CSR_DATA
:
1256 qemu_log_mask(LOG_GUEST_ERROR
, "lan9118_read: Bad reg 0x%x\n", (int)offset
);
1260 static uint32_t lan9118_readw(void *opaque
, hwaddr offset
)
1262 lan9118_state
*s
= (lan9118_state
*)opaque
;
1265 if (s
->read_word_prev_offset
!= (offset
& ~0x3)) {
1266 /* New offset, reset word counter */
1268 s
->read_word_prev_offset
= offset
& ~0x3;
1272 if (s
->read_word_n
== 1) {
1273 s
->read_long
= lan9118_readl(s
, offset
& ~3, 4);
1279 val
= s
->read_long
>> 16;
1281 val
= s
->read_long
& 0xFFFF;
1284 //DPRINTF("Readw reg 0x%02x, val 0x%x\n", (int)offset, val);
1288 static uint64_t lan9118_16bit_mode_read(void *opaque
, hwaddr offset
,
1293 return lan9118_readw(opaque
, offset
);
1295 return lan9118_readl(opaque
, offset
, size
);
1298 hw_error("lan9118_read: Bad size 0x%x\n", size
);
1302 static const MemoryRegionOps lan9118_mem_ops
= {
1303 .read
= lan9118_readl
,
1304 .write
= lan9118_writel
,
1305 .endianness
= DEVICE_NATIVE_ENDIAN
,
1308 static const MemoryRegionOps lan9118_16bit_mem_ops
= {
1309 .read
= lan9118_16bit_mode_read
,
1310 .write
= lan9118_16bit_mode_write
,
1311 .endianness
= DEVICE_NATIVE_ENDIAN
,
1314 static NetClientInfo net_lan9118_info
= {
1315 .type
= NET_CLIENT_OPTIONS_KIND_NIC
,
1316 .size
= sizeof(NICState
),
1317 .receive
= lan9118_receive
,
1318 .link_status_changed
= lan9118_set_link
,
1321 static int lan9118_init1(SysBusDevice
*sbd
)
1323 DeviceState
*dev
= DEVICE(sbd
);
1324 lan9118_state
*s
= LAN9118(dev
);
1327 const MemoryRegionOps
*mem_ops
=
1328 s
->mode_16bit
? &lan9118_16bit_mem_ops
: &lan9118_mem_ops
;
1330 memory_region_init_io(&s
->mmio
, OBJECT(dev
), mem_ops
, s
,
1331 "lan9118-mmio", 0x100);
1332 sysbus_init_mmio(sbd
, &s
->mmio
);
1333 sysbus_init_irq(sbd
, &s
->irq
);
1334 qemu_macaddr_default_if_unset(&s
->conf
.macaddr
);
1336 s
->nic
= qemu_new_nic(&net_lan9118_info
, &s
->conf
,
1337 object_get_typename(OBJECT(dev
)), dev
->id
, s
);
1338 qemu_format_nic_info_str(qemu_get_queue(s
->nic
), s
->conf
.macaddr
.a
);
1339 s
->eeprom
[0] = 0xa5;
1340 for (i
= 0; i
< 6; i
++) {
1341 s
->eeprom
[i
+ 1] = s
->conf
.macaddr
.a
[i
];
1344 s
->txp
= &s
->tx_packet
;
1346 bh
= qemu_bh_new(lan9118_tick
, s
);
1347 s
->timer
= ptimer_init(bh
);
1348 ptimer_set_freq(s
->timer
, 10000);
1349 ptimer_set_limit(s
->timer
, 0xffff, 1);
1354 static Property lan9118_properties
[] = {
1355 DEFINE_NIC_PROPERTIES(lan9118_state
, conf
),
1356 DEFINE_PROP_UINT32("mode_16bit", lan9118_state
, mode_16bit
, 0),
1357 DEFINE_PROP_END_OF_LIST(),
1360 static void lan9118_class_init(ObjectClass
*klass
, void *data
)
1362 DeviceClass
*dc
= DEVICE_CLASS(klass
);
1363 SysBusDeviceClass
*k
= SYS_BUS_DEVICE_CLASS(klass
);
1365 k
->init
= lan9118_init1
;
1366 dc
->reset
= lan9118_reset
;
1367 dc
->props
= lan9118_properties
;
1368 dc
->vmsd
= &vmstate_lan9118
;
1371 static const TypeInfo lan9118_info
= {
1372 .name
= TYPE_LAN9118
,
1373 .parent
= TYPE_SYS_BUS_DEVICE
,
1374 .instance_size
= sizeof(lan9118_state
),
1375 .class_init
= lan9118_class_init
,
1378 static void lan9118_register_types(void)
1380 type_register_static(&lan9118_info
);
1383 /* Legacy helper function. Should go away when machine config files are
1385 void lan9118_init(NICInfo
*nd
, uint32_t base
, qemu_irq irq
)
1390 qemu_check_nic_model(nd
, "lan9118");
1391 dev
= qdev_create(NULL
, TYPE_LAN9118
);
1392 qdev_set_nic_properties(dev
, nd
);
1393 qdev_init_nofail(dev
);
1394 s
= SYS_BUS_DEVICE(dev
);
1395 sysbus_mmio_map(s
, 0, base
);
1396 sysbus_connect_irq(s
, 0, irq
);
1399 type_init(lan9118_register_types
)