9 { 'include': 'common.json' }
10 { 'include': 'sockets.json' }
15 # Detailed migration status.
17 # @transferred: amount of bytes already transferred to the target VM
19 # @remaining: amount of bytes remaining to be transferred to the
22 # @total: total amount of bytes involved in the migration process
24 # @duplicate: number of duplicate (zero) pages (since 1.2)
26 # @skipped: number of skipped zero pages. Always zero, only provided for
27 # compatibility (since 1.5)
29 # @normal: number of normal pages (since 1.2)
31 # @normal-bytes: number of normal bytes sent (since 1.2)
33 # @dirty-pages-rate: number of pages dirtied by second by the guest
36 # @mbps: throughput in megabits/sec. (since 1.6)
38 # @dirty-sync-count: number of times that dirty ram was synchronized
41 # @postcopy-requests: The number of page requests received from the
42 # destination (since 2.7)
44 # @page-size: The number of bytes per page for the various page-based
45 # statistics (since 2.10)
47 # @multifd-bytes: The number of bytes sent through multifd (since 3.0)
49 # @pages-per-second: the number of memory pages transferred per second
52 # @precopy-bytes: The number of bytes sent in the pre-copy phase
55 # @downtime-bytes: The number of bytes sent while the guest is paused
58 # @postcopy-bytes: The number of bytes sent during the post-copy phase
61 # @dirty-sync-missed-zero-copy: Number of times dirty RAM
62 # synchronization could not avoid copying dirty pages. This is
63 # between 0 and @dirty-sync-count * @multifd-channels. (since
68 # @deprecated: Member @skipped is always zero since 1.5.3
73 { 'struct': 'MigrationStats',
74 'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' ,
76 'skipped': { 'type': 'int', 'features': [ 'deprecated' ] },
78 'normal-bytes': 'int', 'dirty-pages-rate': 'int',
79 'mbps': 'number', 'dirty-sync-count': 'int',
80 'postcopy-requests': 'int', 'page-size': 'int',
81 'multifd-bytes': 'uint64', 'pages-per-second': 'uint64',
82 'precopy-bytes': 'uint64', 'downtime-bytes': 'uint64',
83 'postcopy-bytes': 'uint64',
84 'dirty-sync-missed-zero-copy': 'uint64' } }
89 # Detailed XBZRLE migration cache statistics
91 # @cache-size: XBZRLE cache size
93 # @bytes: amount of bytes already transferred to the target VM
95 # @pages: amount of pages transferred to the target VM
97 # @cache-miss: number of cache miss
99 # @cache-miss-rate: rate of cache miss (since 2.1)
101 # @encoding-rate: rate of encoded bytes (since 5.1)
103 # @overflow: number of overflows
107 { 'struct': 'XBZRLECacheStats',
108 'data': {'cache-size': 'size', 'bytes': 'int', 'pages': 'int',
109 'cache-miss': 'int', 'cache-miss-rate': 'number',
110 'encoding-rate': 'number', 'overflow': 'int' } }
115 # Detailed migration compression statistics
117 # @pages: amount of pages compressed and transferred to the target VM
119 # @busy: count of times that no free thread was available to compress
122 # @busy-rate: rate of thread busy
124 # @compressed-size: amount of bytes after compression
126 # @compression-rate: rate of compressed size
130 { 'struct': 'CompressionStats',
131 'data': {'pages': 'int', 'busy': 'int', 'busy-rate': 'number',
132 'compressed-size': 'int', 'compression-rate': 'number' } }
137 # An enumeration of migration status.
139 # @none: no migration has ever happened.
141 # @setup: migration process has been initiated.
143 # @cancelling: in the process of cancelling migration.
145 # @cancelled: cancelling migration is finished.
147 # @active: in the process of doing migration.
149 # @postcopy-active: like active, but now in postcopy mode. (since
152 # @postcopy-paused: during postcopy but paused. (since 3.0)
154 # @postcopy-recover: trying to recover from a paused postcopy. (since
157 # @completed: migration is finished.
159 # @failed: some error occurred during migration process.
161 # @colo: VM is in the process of fault tolerance, VM can not get into
162 # this state unless colo capability is enabled for migration.
165 # @pre-switchover: Paused before device serialisation. (since 2.11)
167 # @device: During device serialisation when pause-before-switchover is
168 # enabled (since 2.11)
170 # @wait-unplug: wait for device unplug request by guest OS to be
171 # completed. (since 4.2)
175 { 'enum': 'MigrationStatus',
176 'data': [ 'none', 'setup', 'cancelling', 'cancelled',
177 'active', 'postcopy-active', 'postcopy-paused',
178 'postcopy-recover', 'completed', 'failed', 'colo',
179 'pre-switchover', 'device', 'wait-unplug' ] }
183 # Detailed VFIO devices migration statistics
185 # @transferred: amount of bytes transferred to the target VM by VFIO
190 { 'struct': 'VfioStats',
191 'data': {'transferred': 'int' } }
196 # Information about current migration process.
198 # @status: @MigrationStatus describing the current migration status.
199 # If this field is not returned, no migration process has been
202 # @ram: @MigrationStats containing detailed migration status, only
203 # returned if status is 'active' or 'completed'(since 1.2)
205 # @disk: @MigrationStats containing detailed disk migration status,
206 # only returned if status is 'active' and it is a block migration
208 # @xbzrle-cache: @XBZRLECacheStats containing detailed XBZRLE
209 # migration statistics, only returned if XBZRLE feature is on and
210 # status is 'active' or 'completed' (since 1.2)
212 # @total-time: total amount of milliseconds since migration started.
213 # If migration has ended, it returns the total migration time.
216 # @downtime: only present when migration finishes correctly total
217 # downtime in milliseconds for the guest. (since 1.3)
219 # @expected-downtime: only present while migration is active expected
220 # downtime in milliseconds for the guest in last walk of the dirty
221 # bitmap. (since 1.3)
223 # @setup-time: amount of setup time in milliseconds *before* the
224 # iterations begin but *after* the QMP command is issued. This is
225 # designed to provide an accounting of any activities (such as
226 # RDMA pinning) which may be expensive, but do not actually occur
227 # during the iterative migration rounds themselves. (since 1.6)
229 # @cpu-throttle-percentage: percentage of time guest cpus are being
230 # throttled during auto-converge. This is only present when
231 # auto-converge has started throttling guest cpus. (Since 2.7)
233 # @error-desc: the human readable error description string. Clients
234 # should not attempt to parse the error strings. (Since 2.7)
236 # @postcopy-blocktime: total time when all vCPU were blocked during
237 # postcopy live migration. This is only present when the
238 # postcopy-blocktime migration capability is enabled. (Since 3.0)
240 # @postcopy-vcpu-blocktime: list of the postcopy blocktime per vCPU.
241 # This is only present when the postcopy-blocktime migration
242 # capability is enabled. (Since 3.0)
244 # @compression: migration compression statistics, only returned if
245 # compression feature is on and status is 'active' or 'completed'
248 # @socket-address: Only used for tcp, to know what the real port is
251 # @vfio: @VfioStats containing detailed VFIO devices migration
252 # statistics, only returned if VFIO device is present, migration
253 # is supported by all VFIO devices and status is 'active' or
254 # 'completed' (since 5.2)
256 # @blocked-reasons: A list of reasons an outgoing migration is
257 # blocked. Present and non-empty when migration is blocked.
260 # @dirty-limit-throttle-time-per-round: Maximum throttle time
261 # (in microseconds) of virtual CPUs each dirty ring full round,
262 # which shows how MigrationCapability dirty-limit affects the
263 # guest during live migration. (Since 8.1)
265 # @dirty-limit-ring-full-time: Estimated average dirty ring full time
266 # (in microseconds) for each dirty ring full round. The value
267 # equals the dirty ring memory size divided by the average dirty
268 # page rate of the virtual CPU, which can be used to observe the
269 # average memory load of the virtual CPU indirectly. Note that
270 # zero means guest doesn't dirty memory. (Since 8.1)
274 # @deprecated: Member @disk is deprecated because block migration is.
275 # Member @compression is deprecated because it is unreliable and
276 # untested. It is recommended to use multifd migration, which
277 # offers an alternative compression implementation that is
278 # reliable and tested.
282 { 'struct': 'MigrationInfo',
283 'data': {'*status': 'MigrationStatus', '*ram': 'MigrationStats',
284 '*disk': { 'type': 'MigrationStats', 'features': [ 'deprecated' ] },
285 '*vfio': 'VfioStats',
286 '*xbzrle-cache': 'XBZRLECacheStats',
287 '*total-time': 'int',
288 '*expected-downtime': 'int',
290 '*setup-time': 'int',
291 '*cpu-throttle-percentage': 'int',
292 '*error-desc': 'str',
293 '*blocked-reasons': ['str'],
294 '*postcopy-blocktime': 'uint32',
295 '*postcopy-vcpu-blocktime': ['uint32'],
296 '*compression': { 'type': 'CompressionStats', 'features': [ 'deprecated' ] },
297 '*socket-address': ['SocketAddress'],
298 '*dirty-limit-throttle-time-per-round': 'uint64',
299 '*dirty-limit-ring-full-time': 'uint64'} }
304 # Returns information about current migration process. If migration
305 # is active there will be another json-object with RAM migration
306 # status and if block migration is active another one with block
309 # Returns: @MigrationInfo
315 # 1. Before the first migration
317 # -> { "execute": "query-migrate" }
318 # <- { "return": {} }
320 # 2. Migration is done and has succeeded
322 # -> { "execute": "query-migrate" }
324 # "status": "completed",
325 # "total-time":12345,
326 # "setup-time":12345,
334 # "normal-bytes":123456,
335 # "dirty-sync-count":15
340 # 3. Migration is done and has failed
342 # -> { "execute": "query-migrate" }
343 # <- { "return": { "status": "failed" } }
345 # 4. Migration is being performed and is not a block migration:
347 # -> { "execute": "query-migrate" }
351 # "total-time":12345,
352 # "setup-time":12345,
353 # "expected-downtime":12345,
360 # "normal-bytes":123456,
361 # "dirty-sync-count":15
366 # 5. Migration is being performed and is a block migration:
368 # -> { "execute": "query-migrate" }
372 # "total-time":12345,
373 # "setup-time":12345,
374 # "expected-downtime":12345,
377 # "remaining":1053304,
378 # "transferred":3720,
381 # "normal-bytes":123456,
382 # "dirty-sync-count":15
386 # "remaining":20880384,
387 # "transferred":91136
392 # 6. Migration is being performed and XBZRLE is active:
394 # -> { "execute": "query-migrate" }
398 # "total-time":12345,
399 # "setup-time":12345,
400 # "expected-downtime":12345,
403 # "remaining":1053304,
404 # "transferred":3720,
407 # "normal-bytes":3412992,
408 # "dirty-sync-count":15
411 # "cache-size":67108864,
415 # "cache-miss-rate":0.123,
416 # "encoding-rate":80.1,
422 { 'command': 'query-migrate', 'returns': 'MigrationInfo' }
425 # @MigrationCapability:
427 # Migration capabilities enumeration
429 # @xbzrle: Migration supports xbzrle (Xor Based Zero Run Length
430 # Encoding). This feature allows us to minimize migration traffic
431 # for certain work loads, by sending compressed difference of the
434 # @rdma-pin-all: Controls whether or not the entire VM memory
435 # footprint is mlock()'d on demand or all at once. Refer to
436 # docs/rdma.txt for usage. Disabled by default. (since 2.0)
438 # @zero-blocks: During storage migration encode blocks of zeroes
439 # efficiently. This essentially saves 1MB of zeroes per block on
440 # the wire. Enabling requires source and target VM to support
441 # this feature. To enable it is sufficient to enable the
442 # capability on the source VM. The feature is disabled by default.
445 # @compress: Use multiple compression threads to accelerate live
446 # migration. This feature can help to reduce the migration
447 # traffic, by sending compressed pages. Please note that if
448 # compress and xbzrle are both on, compress only takes effect in
449 # the ram bulk stage, after that, it will be disabled and only
450 # xbzrle takes effect, this can help to minimize migration
451 # traffic. The feature is disabled by default. (since 2.4)
453 # @events: generate events for each migration state change (since 2.4)
455 # @auto-converge: If enabled, QEMU will automatically throttle down
456 # the guest to speed up convergence of RAM migration. (since 1.6)
458 # @postcopy-ram: Start executing on the migration target before all of
459 # RAM has been migrated, pulling the remaining pages along as
460 # needed. The capacity must have the same setting on both source
461 # and target or migration will not even start. NOTE: If the
462 # migration fails during postcopy the VM will fail. (since 2.6)
464 # @x-colo: If enabled, migration will never end, and the state of the
465 # VM on the primary side will be migrated continuously to the VM
466 # on secondary side, this process is called COarse-Grain LOck
467 # Stepping (COLO) for Non-stop Service. (since 2.8)
469 # @release-ram: if enabled, qemu will free the migrated ram pages on
470 # the source during postcopy-ram migration. (since 2.9)
472 # @block: If enabled, QEMU will also migrate the contents of all block
473 # devices. Default is disabled. A possible alternative uses
474 # mirror jobs to a builtin NBD server on the destination, which
475 # offers more flexibility. (Since 2.10)
477 # @return-path: If enabled, migration will use the return path even
478 # for precopy. (since 2.10)
480 # @pause-before-switchover: Pause outgoing migration before
481 # serialising device state and before disabling block IO (since
484 # @multifd: Use more than one fd for migration (since 4.0)
486 # @dirty-bitmaps: If enabled, QEMU will migrate named dirty bitmaps.
489 # @postcopy-blocktime: Calculate downtime for postcopy live migration
492 # @late-block-activate: If enabled, the destination will not activate
493 # block devices (and thus take locks) immediately at the end of
494 # migration. (since 3.0)
496 # @x-ignore-shared: If enabled, QEMU will not migrate shared memory
497 # that is accessible on the destination machine. (since 4.0)
499 # @validate-uuid: Send the UUID of the source to allow the destination
500 # to ensure it is the same. (since 4.2)
502 # @background-snapshot: If enabled, the migration stream will be a
503 # snapshot of the VM exactly at the point when the migration
504 # procedure starts. The VM RAM is saved with running VM. (since
507 # @zero-copy-send: Controls behavior on sending memory pages on
508 # migration. When true, enables a zero-copy mechanism for sending
509 # memory pages, if host supports it. Requires that QEMU be
510 # permitted to use locked memory for guest RAM pages. (since 7.1)
512 # @postcopy-preempt: If enabled, the migration process will allow
513 # postcopy requests to preempt precopy stream, so postcopy
514 # requests will be handled faster. This is a performance feature
515 # and should not affect the correctness of postcopy migration.
518 # @switchover-ack: If enabled, migration will not stop the source VM
519 # and complete the migration until an ACK is received from the
520 # destination that it's OK to do so. Exactly when this ACK is
521 # sent depends on the migrated devices that use this feature. For
522 # example, a device can use it to make sure some of its data is
523 # sent and loaded in the destination before doing switchover.
524 # This can reduce downtime if devices that support this capability
525 # are present. 'return-path' capability must be enabled to use
528 # @dirty-limit: If enabled, migration will throttle vCPUs as needed to
529 # keep their dirty page rate within @vcpu-dirty-limit. This can
530 # improve responsiveness of large guests during live migration,
531 # and can result in more stable read performance. Requires KVM
532 # with accelerator property "dirty-ring-size" set. (Since 8.1)
534 # @mapped-ram: Migrate using fixed offsets in the migration file for
535 # each RAM page. Requires a migration URI that supports seeking,
536 # such as a file. (since 9.0)
540 # @deprecated: Member @block is deprecated. Use blockdev-mirror with
541 # NBD instead. Member @compress is deprecated because it is
542 # unreliable and untested. It is recommended to use multifd
543 # migration, which offers an alternative compression
544 # implementation that is reliable and tested.
546 # @unstable: Members @x-colo and @x-ignore-shared are experimental.
550 { 'enum': 'MigrationCapability',
551 'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks',
552 { 'name': 'compress', 'features': [ 'deprecated' ] },
553 'events', 'postcopy-ram',
554 { 'name': 'x-colo', 'features': [ 'unstable' ] },
556 { 'name': 'block', 'features': [ 'deprecated' ] },
557 'return-path', 'pause-before-switchover', 'multifd',
558 'dirty-bitmaps', 'postcopy-blocktime', 'late-block-activate',
559 { 'name': 'x-ignore-shared', 'features': [ 'unstable' ] },
560 'validate-uuid', 'background-snapshot',
561 'zero-copy-send', 'postcopy-preempt', 'switchover-ack',
562 'dirty-limit', 'mapped-ram'] }
565 # @MigrationCapabilityStatus:
567 # Migration capability information
569 # @capability: capability enum
571 # @state: capability state bool
575 { 'struct': 'MigrationCapabilityStatus',
576 'data': { 'capability': 'MigrationCapability', 'state': 'bool' } }
579 # @migrate-set-capabilities:
581 # Enable/Disable the following migration capabilities (like xbzrle)
583 # @capabilities: json array of capability modifications to make
589 # -> { "execute": "migrate-set-capabilities" , "arguments":
590 # { "capabilities": [ { "capability": "xbzrle", "state": true } ] } }
591 # <- { "return": {} }
593 { 'command': 'migrate-set-capabilities',
594 'data': { 'capabilities': ['MigrationCapabilityStatus'] } }
597 # @query-migrate-capabilities:
599 # Returns information about the current migration capabilities status
601 # Returns: @MigrationCapabilityStatus
607 # -> { "execute": "query-migrate-capabilities" }
609 # {"state": false, "capability": "xbzrle"},
610 # {"state": false, "capability": "rdma-pin-all"},
611 # {"state": false, "capability": "auto-converge"},
612 # {"state": false, "capability": "zero-blocks"},
613 # {"state": false, "capability": "compress"},
614 # {"state": true, "capability": "events"},
615 # {"state": false, "capability": "postcopy-ram"},
616 # {"state": false, "capability": "x-colo"}
619 { 'command': 'query-migrate-capabilities', 'returns': ['MigrationCapabilityStatus']}
622 # @MultiFDCompression:
624 # An enumeration of multifd compression methods.
626 # @none: no compression.
628 # @zlib: use zlib compression method.
630 # @zstd: use zstd compression method.
634 { 'enum': 'MultiFDCompression',
635 'data': [ 'none', 'zlib',
636 { 'name': 'zstd', 'if': 'CONFIG_ZSTD' } ] }
641 # @normal: the original form of migration. (since 8.2)
643 # @cpr-reboot: The migrate command stops the VM and saves state to
644 # the URI. After quitting QEMU, the user resumes by running
647 # This mode allows the user to quit QEMU, optionally update and
648 # reboot the OS, and restart QEMU. If the user reboots, the URI
649 # must persist across the reboot, such as by using a file.
651 # Unlike normal mode, the use of certain local storage options
652 # does not block the migration, but the user must not modify the
653 # contents of guest block devices between the quit and restart.
655 # This mode supports VFIO devices provided the user first puts
656 # the guest in the suspended runstate, such as by issuing
657 # guest-suspend-ram to the QEMU guest agent.
659 # Best performance is achieved when the memory backend is shared
660 # and the @x-ignore-shared migration capability is set, but this
661 # is not required. Further, if the user reboots before restarting
662 # such a configuration, the shared memory must persist across the
663 # reboot, such as by backing it with a dax device.
665 # @cpr-reboot may not be used with postcopy, background-snapshot,
671 'data': [ 'normal', 'cpr-reboot' ] }
674 # @BitmapMigrationBitmapAliasTransform:
676 # @persistent: If present, the bitmap will be made persistent or
677 # transient depending on this parameter.
681 { 'struct': 'BitmapMigrationBitmapAliasTransform',
683 '*persistent': 'bool'
687 # @BitmapMigrationBitmapAlias:
689 # @name: The name of the bitmap.
691 # @alias: An alias name for migration (for example the bitmap name on
692 # the opposite site).
694 # @transform: Allows the modification of the migrated bitmap. (since
699 { 'struct': 'BitmapMigrationBitmapAlias',
703 '*transform': 'BitmapMigrationBitmapAliasTransform'
707 # @BitmapMigrationNodeAlias:
709 # Maps a block node name and the bitmaps it has to aliases for dirty
712 # @node-name: A block node name.
714 # @alias: An alias block node name for migration (for example the node
715 # name on the opposite site).
717 # @bitmaps: Mappings for the bitmaps on this node.
721 { 'struct': 'BitmapMigrationNodeAlias',
725 'bitmaps': [ 'BitmapMigrationBitmapAlias' ]
729 # @MigrationParameter:
731 # Migration parameters enumeration
733 # @announce-initial: Initial delay (in milliseconds) before sending
734 # the first announce (Since 4.0)
736 # @announce-max: Maximum delay (in milliseconds) between packets in
737 # the announcement (Since 4.0)
739 # @announce-rounds: Number of self-announce packets sent after
740 # migration (Since 4.0)
742 # @announce-step: Increase in delay (in milliseconds) between
743 # subsequent packets in the announcement (Since 4.0)
745 # @compress-level: Set the compression level to be used in live
746 # migration, the compression level is an integer between 0 and 9,
747 # where 0 means no compression, 1 means the best compression
748 # speed, and 9 means best compression ratio which will consume
751 # @compress-threads: Set compression thread count to be used in live
752 # migration, the compression thread count is an integer between 1
755 # @compress-wait-thread: Controls behavior when all compression
756 # threads are currently busy. If true (default), wait for a free
757 # compression thread to become available; otherwise, send the page
758 # uncompressed. (Since 3.1)
760 # @decompress-threads: Set decompression thread count to be used in
761 # live migration, the decompression thread count is an integer
762 # between 1 and 255. Usually, decompression is at least 4 times as
763 # fast as compression, so set the decompress-threads to the number
764 # about 1/4 of compress-threads is adequate.
766 # @throttle-trigger-threshold: The ratio of bytes_dirty_period and
767 # bytes_xfer_period to trigger throttling. It is expressed as
768 # percentage. The default value is 50. (Since 5.0)
770 # @cpu-throttle-initial: Initial percentage of time guest cpus are
771 # throttled when migration auto-converge is activated. The
772 # default value is 20. (Since 2.7)
774 # @cpu-throttle-increment: throttle percentage increase each time
775 # auto-converge detects that migration is not making progress.
776 # The default value is 10. (Since 2.7)
778 # @cpu-throttle-tailslow: Make CPU throttling slower at tail stage At
779 # the tail stage of throttling, the Guest is very sensitive to CPU
780 # percentage while the @cpu-throttle -increment is excessive
781 # usually at tail stage. If this parameter is true, we will
782 # compute the ideal CPU percentage used by the Guest, which may
783 # exactly make the dirty rate match the dirty rate threshold.
784 # Then we will choose a smaller throttle increment between the one
785 # specified by @cpu-throttle-increment and the one generated by
786 # ideal CPU percentage. Therefore, it is compatible to
787 # traditional throttling, meanwhile the throttle increment won't
788 # be excessive at tail stage. The default value is false. (Since
791 # @tls-creds: ID of the 'tls-creds' object that provides credentials
792 # for establishing a TLS connection over the migration data
793 # channel. On the outgoing side of the migration, the credentials
794 # must be for a 'client' endpoint, while for the incoming side the
795 # credentials must be for a 'server' endpoint. Setting this will
796 # enable TLS for all migrations. The default is unset, resulting
797 # in unsecured migration at the QEMU level. (Since 2.7)
799 # @tls-hostname: hostname of the target host for the migration. This
800 # is required when using x509 based TLS credentials and the
801 # migration URI does not already include a hostname. For example
802 # if using fd: or exec: based migration, the hostname must be
803 # provided so that the server's x509 certificate identity can be
804 # validated. (Since 2.7)
806 # @tls-authz: ID of the 'authz' object subclass that provides access
807 # control checking of the TLS x509 certificate distinguished name.
808 # This object is only resolved at time of use, so can be deleted
809 # and recreated on the fly while the migration server is active.
810 # If missing, it will default to denying access (Since 4.0)
812 # @max-bandwidth: to set maximum speed for migration. maximum speed
813 # in bytes per second. (Since 2.8)
815 # @avail-switchover-bandwidth: to set the available bandwidth that
816 # migration can use during switchover phase. NOTE! This does not
817 # limit the bandwidth during switchover, but only for calculations when
818 # making decisions to switchover. By default, this value is zero,
819 # which means QEMU will estimate the bandwidth automatically. This can
820 # be set when the estimated value is not accurate, while the user is
821 # able to guarantee such bandwidth is available when switching over.
822 # When specified correctly, this can make the switchover decision much
823 # more accurate. (Since 8.2)
825 # @downtime-limit: set maximum tolerated downtime for migration.
826 # maximum downtime in milliseconds (Since 2.8)
828 # @x-checkpoint-delay: The delay time (in ms) between two COLO
829 # checkpoints in periodic mode. (Since 2.8)
831 # @block-incremental: Affects how much storage is migrated when the
832 # block migration capability is enabled. When false, the entire
833 # storage backing chain is migrated into a flattened image at the
834 # destination; when true, only the active qcow2 layer is migrated
835 # and the destination must already have access to the same backing
836 # chain as was used on the source. (since 2.10)
838 # @multifd-channels: Number of channels used to migrate data in
839 # parallel. This is the same number that the number of sockets
840 # used for migration. The default value is 2 (since 4.0)
842 # @xbzrle-cache-size: cache size to be used by XBZRLE migration. It
843 # needs to be a multiple of the target page size and a power of 2
846 # @max-postcopy-bandwidth: Background transfer bandwidth during
847 # postcopy. Defaults to 0 (unlimited). In bytes per second.
850 # @max-cpu-throttle: maximum cpu throttle percentage. Defaults to 99.
853 # @multifd-compression: Which compression method to use. Defaults to
856 # @multifd-zlib-level: Set the compression level to be used in live
857 # migration, the compression level is an integer between 0 and 9,
858 # where 0 means no compression, 1 means the best compression
859 # speed, and 9 means best compression ratio which will consume
860 # more CPU. Defaults to 1. (Since 5.0)
862 # @multifd-zstd-level: Set the compression level to be used in live
863 # migration, the compression level is an integer between 0 and 20,
864 # where 0 means no compression, 1 means the best compression
865 # speed, and 20 means best compression ratio which will consume
866 # more CPU. Defaults to 1. (Since 5.0)
868 # @block-bitmap-mapping: Maps block nodes and bitmaps on them to
869 # aliases for the purpose of dirty bitmap migration. Such aliases
870 # may for example be the corresponding names on the opposite site.
871 # The mapping must be one-to-one, but not necessarily complete: On
872 # the source, unmapped bitmaps and all bitmaps on unmapped nodes
873 # will be ignored. On the destination, encountering an unmapped
874 # alias in the incoming migration stream will result in a report,
875 # and all further bitmap migration data will then be discarded.
876 # Note that the destination does not know about bitmaps it does
877 # not receive, so there is no limitation or requirement regarding
878 # the number of bitmaps received, or how they are named, or on
879 # which nodes they are placed. By default (when this parameter
880 # has never been set), bitmap names are mapped to themselves.
881 # Nodes are mapped to their block device name if there is one, and
882 # to their node name otherwise. (Since 5.2)
884 # @x-vcpu-dirty-limit-period: Periodic time (in milliseconds) of dirty
885 # limit during live migration. Should be in the range 1 to 1000ms.
886 # Defaults to 1000ms. (Since 8.1)
888 # @vcpu-dirty-limit: Dirtyrate limit (MB/s) during live migration.
889 # Defaults to 1. (Since 8.1)
891 # @mode: Migration mode. See description in @MigMode. Default is 'normal'.
896 # @deprecated: Member @block-incremental is deprecated. Use
897 # blockdev-mirror with NBD instead. Members @compress-level,
898 # @compress-threads, @decompress-threads and @compress-wait-thread
899 # are deprecated because @compression is deprecated.
901 # @unstable: Members @x-checkpoint-delay and @x-vcpu-dirty-limit-period
906 { 'enum': 'MigrationParameter',
907 'data': ['announce-initial', 'announce-max',
908 'announce-rounds', 'announce-step',
909 { 'name': 'compress-level', 'features': [ 'deprecated' ] },
910 { 'name': 'compress-threads', 'features': [ 'deprecated' ] },
911 { 'name': 'decompress-threads', 'features': [ 'deprecated' ] },
912 { 'name': 'compress-wait-thread', 'features': [ 'deprecated' ] },
913 'throttle-trigger-threshold',
914 'cpu-throttle-initial', 'cpu-throttle-increment',
915 'cpu-throttle-tailslow',
916 'tls-creds', 'tls-hostname', 'tls-authz', 'max-bandwidth',
917 'avail-switchover-bandwidth', 'downtime-limit',
918 { 'name': 'x-checkpoint-delay', 'features': [ 'unstable' ] },
919 { 'name': 'block-incremental', 'features': [ 'deprecated' ] },
921 'xbzrle-cache-size', 'max-postcopy-bandwidth',
922 'max-cpu-throttle', 'multifd-compression',
923 'multifd-zlib-level', 'multifd-zstd-level',
924 'block-bitmap-mapping',
925 { 'name': 'x-vcpu-dirty-limit-period', 'features': ['unstable'] },
930 # @MigrateSetParameters:
932 # @announce-initial: Initial delay (in milliseconds) before sending
933 # the first announce (Since 4.0)
935 # @announce-max: Maximum delay (in milliseconds) between packets in
936 # the announcement (Since 4.0)
938 # @announce-rounds: Number of self-announce packets sent after
939 # migration (Since 4.0)
941 # @announce-step: Increase in delay (in milliseconds) between
942 # subsequent packets in the announcement (Since 4.0)
944 # @compress-level: compression level
946 # @compress-threads: compression thread count
948 # @compress-wait-thread: Controls behavior when all compression
949 # threads are currently busy. If true (default), wait for a free
950 # compression thread to become available; otherwise, send the page
951 # uncompressed. (Since 3.1)
953 # @decompress-threads: decompression thread count
955 # @throttle-trigger-threshold: The ratio of bytes_dirty_period and
956 # bytes_xfer_period to trigger throttling. It is expressed as
957 # percentage. The default value is 50. (Since 5.0)
959 # @cpu-throttle-initial: Initial percentage of time guest cpus are
960 # throttled when migration auto-converge is activated. The
961 # default value is 20. (Since 2.7)
963 # @cpu-throttle-increment: throttle percentage increase each time
964 # auto-converge detects that migration is not making progress.
965 # The default value is 10. (Since 2.7)
967 # @cpu-throttle-tailslow: Make CPU throttling slower at tail stage At
968 # the tail stage of throttling, the Guest is very sensitive to CPU
969 # percentage while the @cpu-throttle -increment is excessive
970 # usually at tail stage. If this parameter is true, we will
971 # compute the ideal CPU percentage used by the Guest, which may
972 # exactly make the dirty rate match the dirty rate threshold.
973 # Then we will choose a smaller throttle increment between the one
974 # specified by @cpu-throttle-increment and the one generated by
975 # ideal CPU percentage. Therefore, it is compatible to
976 # traditional throttling, meanwhile the throttle increment won't
977 # be excessive at tail stage. The default value is false. (Since
980 # @tls-creds: ID of the 'tls-creds' object that provides credentials
981 # for establishing a TLS connection over the migration data
982 # channel. On the outgoing side of the migration, the credentials
983 # must be for a 'client' endpoint, while for the incoming side the
984 # credentials must be for a 'server' endpoint. Setting this to a
985 # non-empty string enables TLS for all migrations. An empty
986 # string means that QEMU will use plain text mode for migration,
987 # rather than TLS (Since 2.9) Previously (since 2.7), this was
988 # reported by omitting tls-creds instead.
990 # @tls-hostname: hostname of the target host for the migration. This
991 # is required when using x509 based TLS credentials and the
992 # migration URI does not already include a hostname. For example
993 # if using fd: or exec: based migration, the hostname must be
994 # provided so that the server's x509 certificate identity can be
995 # validated. (Since 2.7) An empty string means that QEMU will use
996 # the hostname associated with the migration URI, if any. (Since
997 # 2.9) Previously (since 2.7), this was reported by omitting
998 # tls-hostname instead.
1000 # @tls-authz: ID of the 'authz' object subclass that provides access
1001 # control checking of the TLS x509 certificate distinguished name.
1004 # @max-bandwidth: to set maximum speed for migration. maximum speed
1005 # in bytes per second. (Since 2.8)
1007 # @avail-switchover-bandwidth: to set the available bandwidth that
1008 # migration can use during switchover phase. NOTE! This does not
1009 # limit the bandwidth during switchover, but only for calculations when
1010 # making decisions to switchover. By default, this value is zero,
1011 # which means QEMU will estimate the bandwidth automatically. This can
1012 # be set when the estimated value is not accurate, while the user is
1013 # able to guarantee such bandwidth is available when switching over.
1014 # When specified correctly, this can make the switchover decision much
1015 # more accurate. (Since 8.2)
1017 # @downtime-limit: set maximum tolerated downtime for migration.
1018 # maximum downtime in milliseconds (Since 2.8)
1020 # @x-checkpoint-delay: the delay time between two COLO checkpoints.
1023 # @block-incremental: Affects how much storage is migrated when the
1024 # block migration capability is enabled. When false, the entire
1025 # storage backing chain is migrated into a flattened image at the
1026 # destination; when true, only the active qcow2 layer is migrated
1027 # and the destination must already have access to the same backing
1028 # chain as was used on the source. (since 2.10)
1030 # @multifd-channels: Number of channels used to migrate data in
1031 # parallel. This is the same number that the number of sockets
1032 # used for migration. The default value is 2 (since 4.0)
1034 # @xbzrle-cache-size: cache size to be used by XBZRLE migration. It
1035 # needs to be a multiple of the target page size and a power of 2
1038 # @max-postcopy-bandwidth: Background transfer bandwidth during
1039 # postcopy. Defaults to 0 (unlimited). In bytes per second.
1042 # @max-cpu-throttle: maximum cpu throttle percentage. The default
1043 # value is 99. (Since 3.1)
1045 # @multifd-compression: Which compression method to use. Defaults to
1048 # @multifd-zlib-level: Set the compression level to be used in live
1049 # migration, the compression level is an integer between 0 and 9,
1050 # where 0 means no compression, 1 means the best compression
1051 # speed, and 9 means best compression ratio which will consume
1052 # more CPU. Defaults to 1. (Since 5.0)
1054 # @multifd-zstd-level: Set the compression level to be used in live
1055 # migration, the compression level is an integer between 0 and 20,
1056 # where 0 means no compression, 1 means the best compression
1057 # speed, and 20 means best compression ratio which will consume
1058 # more CPU. Defaults to 1. (Since 5.0)
1060 # @block-bitmap-mapping: Maps block nodes and bitmaps on them to
1061 # aliases for the purpose of dirty bitmap migration. Such aliases
1062 # may for example be the corresponding names on the opposite site.
1063 # The mapping must be one-to-one, but not necessarily complete: On
1064 # the source, unmapped bitmaps and all bitmaps on unmapped nodes
1065 # will be ignored. On the destination, encountering an unmapped
1066 # alias in the incoming migration stream will result in a report,
1067 # and all further bitmap migration data will then be discarded.
1068 # Note that the destination does not know about bitmaps it does
1069 # not receive, so there is no limitation or requirement regarding
1070 # the number of bitmaps received, or how they are named, or on
1071 # which nodes they are placed. By default (when this parameter
1072 # has never been set), bitmap names are mapped to themselves.
1073 # Nodes are mapped to their block device name if there is one, and
1074 # to their node name otherwise. (Since 5.2)
1076 # @x-vcpu-dirty-limit-period: Periodic time (in milliseconds) of dirty
1077 # limit during live migration. Should be in the range 1 to 1000ms.
1078 # Defaults to 1000ms. (Since 8.1)
1080 # @vcpu-dirty-limit: Dirtyrate limit (MB/s) during live migration.
1081 # Defaults to 1. (Since 8.1)
1083 # @mode: Migration mode. See description in @MigMode. Default is 'normal'.
1088 # @deprecated: Member @block-incremental is deprecated. Use
1089 # blockdev-mirror with NBD instead. Members @compress-level,
1090 # @compress-threads, @decompress-threads and @compress-wait-thread
1091 # are deprecated because @compression is deprecated.
1093 # @unstable: Members @x-checkpoint-delay and @x-vcpu-dirty-limit-period
1096 # TODO: either fuse back into MigrationParameters, or make
1097 # MigrationParameters members mandatory
1101 { 'struct': 'MigrateSetParameters',
1102 'data': { '*announce-initial': 'size',
1103 '*announce-max': 'size',
1104 '*announce-rounds': 'size',
1105 '*announce-step': 'size',
1106 '*compress-level': { 'type': 'uint8',
1107 'features': [ 'deprecated' ] },
1108 '*compress-threads': { 'type': 'uint8',
1109 'features': [ 'deprecated' ] },
1110 '*compress-wait-thread': { 'type': 'bool',
1111 'features': [ 'deprecated' ] },
1112 '*decompress-threads': { 'type': 'uint8',
1113 'features': [ 'deprecated' ] },
1114 '*throttle-trigger-threshold': 'uint8',
1115 '*cpu-throttle-initial': 'uint8',
1116 '*cpu-throttle-increment': 'uint8',
1117 '*cpu-throttle-tailslow': 'bool',
1118 '*tls-creds': 'StrOrNull',
1119 '*tls-hostname': 'StrOrNull',
1120 '*tls-authz': 'StrOrNull',
1121 '*max-bandwidth': 'size',
1122 '*avail-switchover-bandwidth': 'size',
1123 '*downtime-limit': 'uint64',
1124 '*x-checkpoint-delay': { 'type': 'uint32',
1125 'features': [ 'unstable' ] },
1126 '*block-incremental': { 'type': 'bool',
1127 'features': [ 'deprecated' ] },
1128 '*multifd-channels': 'uint8',
1129 '*xbzrle-cache-size': 'size',
1130 '*max-postcopy-bandwidth': 'size',
1131 '*max-cpu-throttle': 'uint8',
1132 '*multifd-compression': 'MultiFDCompression',
1133 '*multifd-zlib-level': 'uint8',
1134 '*multifd-zstd-level': 'uint8',
1135 '*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ],
1136 '*x-vcpu-dirty-limit-period': { 'type': 'uint64',
1137 'features': [ 'unstable' ] },
1138 '*vcpu-dirty-limit': 'uint64',
1139 '*mode': 'MigMode'} }
1142 # @migrate-set-parameters:
1144 # Set various migration parameters.
1150 # -> { "execute": "migrate-set-parameters" ,
1151 # "arguments": { "multifd-channels": 5 } }
1152 # <- { "return": {} }
1154 { 'command': 'migrate-set-parameters', 'boxed': true,
1155 'data': 'MigrateSetParameters' }
1158 # @MigrationParameters:
1160 # The optional members aren't actually optional.
1162 # @announce-initial: Initial delay (in milliseconds) before sending
1163 # the first announce (Since 4.0)
1165 # @announce-max: Maximum delay (in milliseconds) between packets in
1166 # the announcement (Since 4.0)
1168 # @announce-rounds: Number of self-announce packets sent after
1169 # migration (Since 4.0)
1171 # @announce-step: Increase in delay (in milliseconds) between
1172 # subsequent packets in the announcement (Since 4.0)
1174 # @compress-level: compression level
1176 # @compress-threads: compression thread count
1178 # @compress-wait-thread: Controls behavior when all compression
1179 # threads are currently busy. If true (default), wait for a free
1180 # compression thread to become available; otherwise, send the page
1181 # uncompressed. (Since 3.1)
1183 # @decompress-threads: decompression thread count
1185 # @throttle-trigger-threshold: The ratio of bytes_dirty_period and
1186 # bytes_xfer_period to trigger throttling. It is expressed as
1187 # percentage. The default value is 50. (Since 5.0)
1189 # @cpu-throttle-initial: Initial percentage of time guest cpus are
1190 # throttled when migration auto-converge is activated. (Since
1193 # @cpu-throttle-increment: throttle percentage increase each time
1194 # auto-converge detects that migration is not making progress.
1197 # @cpu-throttle-tailslow: Make CPU throttling slower at tail stage At
1198 # the tail stage of throttling, the Guest is very sensitive to CPU
1199 # percentage while the @cpu-throttle -increment is excessive
1200 # usually at tail stage. If this parameter is true, we will
1201 # compute the ideal CPU percentage used by the Guest, which may
1202 # exactly make the dirty rate match the dirty rate threshold.
1203 # Then we will choose a smaller throttle increment between the one
1204 # specified by @cpu-throttle-increment and the one generated by
1205 # ideal CPU percentage. Therefore, it is compatible to
1206 # traditional throttling, meanwhile the throttle increment won't
1207 # be excessive at tail stage. The default value is false. (Since
1210 # @tls-creds: ID of the 'tls-creds' object that provides credentials
1211 # for establishing a TLS connection over the migration data
1212 # channel. On the outgoing side of the migration, the credentials
1213 # must be for a 'client' endpoint, while for the incoming side the
1214 # credentials must be for a 'server' endpoint. An empty string
1215 # means that QEMU will use plain text mode for migration, rather
1216 # than TLS (Since 2.7) Note: 2.8 reports this by omitting
1217 # tls-creds instead.
1219 # @tls-hostname: hostname of the target host for the migration. This
1220 # is required when using x509 based TLS credentials and the
1221 # migration URI does not already include a hostname. For example
1222 # if using fd: or exec: based migration, the hostname must be
1223 # provided so that the server's x509 certificate identity can be
1224 # validated. (Since 2.7) An empty string means that QEMU will use
1225 # the hostname associated with the migration URI, if any. (Since
1226 # 2.9) Note: 2.8 reports this by omitting tls-hostname instead.
1228 # @tls-authz: ID of the 'authz' object subclass that provides access
1229 # control checking of the TLS x509 certificate distinguished name.
1232 # @max-bandwidth: to set maximum speed for migration. maximum speed
1233 # in bytes per second. (Since 2.8)
1235 # @avail-switchover-bandwidth: to set the available bandwidth that
1236 # migration can use during switchover phase. NOTE! This does not
1237 # limit the bandwidth during switchover, but only for calculations when
1238 # making decisions to switchover. By default, this value is zero,
1239 # which means QEMU will estimate the bandwidth automatically. This can
1240 # be set when the estimated value is not accurate, while the user is
1241 # able to guarantee such bandwidth is available when switching over.
1242 # When specified correctly, this can make the switchover decision much
1243 # more accurate. (Since 8.2)
1245 # @downtime-limit: set maximum tolerated downtime for migration.
1246 # maximum downtime in milliseconds (Since 2.8)
1248 # @x-checkpoint-delay: the delay time between two COLO checkpoints.
1251 # @block-incremental: Affects how much storage is migrated when the
1252 # block migration capability is enabled. When false, the entire
1253 # storage backing chain is migrated into a flattened image at the
1254 # destination; when true, only the active qcow2 layer is migrated
1255 # and the destination must already have access to the same backing
1256 # chain as was used on the source. (since 2.10)
1258 # @multifd-channels: Number of channels used to migrate data in
1259 # parallel. This is the same number that the number of sockets
1260 # used for migration. The default value is 2 (since 4.0)
1262 # @xbzrle-cache-size: cache size to be used by XBZRLE migration. It
1263 # needs to be a multiple of the target page size and a power of 2
1266 # @max-postcopy-bandwidth: Background transfer bandwidth during
1267 # postcopy. Defaults to 0 (unlimited). In bytes per second.
1270 # @max-cpu-throttle: maximum cpu throttle percentage. Defaults to 99.
1273 # @multifd-compression: Which compression method to use. Defaults to
1276 # @multifd-zlib-level: Set the compression level to be used in live
1277 # migration, the compression level is an integer between 0 and 9,
1278 # where 0 means no compression, 1 means the best compression
1279 # speed, and 9 means best compression ratio which will consume
1280 # more CPU. Defaults to 1. (Since 5.0)
1282 # @multifd-zstd-level: Set the compression level to be used in live
1283 # migration, the compression level is an integer between 0 and 20,
1284 # where 0 means no compression, 1 means the best compression
1285 # speed, and 20 means best compression ratio which will consume
1286 # more CPU. Defaults to 1. (Since 5.0)
1288 # @block-bitmap-mapping: Maps block nodes and bitmaps on them to
1289 # aliases for the purpose of dirty bitmap migration. Such aliases
1290 # may for example be the corresponding names on the opposite site.
1291 # The mapping must be one-to-one, but not necessarily complete: On
1292 # the source, unmapped bitmaps and all bitmaps on unmapped nodes
1293 # will be ignored. On the destination, encountering an unmapped
1294 # alias in the incoming migration stream will result in a report,
1295 # and all further bitmap migration data will then be discarded.
1296 # Note that the destination does not know about bitmaps it does
1297 # not receive, so there is no limitation or requirement regarding
1298 # the number of bitmaps received, or how they are named, or on
1299 # which nodes they are placed. By default (when this parameter
1300 # has never been set), bitmap names are mapped to themselves.
1301 # Nodes are mapped to their block device name if there is one, and
1302 # to their node name otherwise. (Since 5.2)
1304 # @x-vcpu-dirty-limit-period: Periodic time (in milliseconds) of dirty
1305 # limit during live migration. Should be in the range 1 to 1000ms.
1306 # Defaults to 1000ms. (Since 8.1)
1308 # @vcpu-dirty-limit: Dirtyrate limit (MB/s) during live migration.
1309 # Defaults to 1. (Since 8.1)
1311 # @mode: Migration mode. See description in @MigMode. Default is 'normal'.
1316 # @deprecated: Member @block-incremental is deprecated. Use
1317 # blockdev-mirror with NBD instead. Members @compress-level,
1318 # @compress-threads, @decompress-threads and @compress-wait-thread
1319 # are deprecated because @compression is deprecated.
1321 # @unstable: Members @x-checkpoint-delay and @x-vcpu-dirty-limit-period
1326 { 'struct': 'MigrationParameters',
1327 'data': { '*announce-initial': 'size',
1328 '*announce-max': 'size',
1329 '*announce-rounds': 'size',
1330 '*announce-step': 'size',
1331 '*compress-level': { 'type': 'uint8',
1332 'features': [ 'deprecated' ] },
1333 '*compress-threads': { 'type': 'uint8',
1334 'features': [ 'deprecated' ] },
1335 '*compress-wait-thread': { 'type': 'bool',
1336 'features': [ 'deprecated' ] },
1337 '*decompress-threads': { 'type': 'uint8',
1338 'features': [ 'deprecated' ] },
1339 '*throttle-trigger-threshold': 'uint8',
1340 '*cpu-throttle-initial': 'uint8',
1341 '*cpu-throttle-increment': 'uint8',
1342 '*cpu-throttle-tailslow': 'bool',
1343 '*tls-creds': 'str',
1344 '*tls-hostname': 'str',
1345 '*tls-authz': 'str',
1346 '*max-bandwidth': 'size',
1347 '*avail-switchover-bandwidth': 'size',
1348 '*downtime-limit': 'uint64',
1349 '*x-checkpoint-delay': { 'type': 'uint32',
1350 'features': [ 'unstable' ] },
1351 '*block-incremental': { 'type': 'bool',
1352 'features': [ 'deprecated' ] },
1353 '*multifd-channels': 'uint8',
1354 '*xbzrle-cache-size': 'size',
1355 '*max-postcopy-bandwidth': 'size',
1356 '*max-cpu-throttle': 'uint8',
1357 '*multifd-compression': 'MultiFDCompression',
1358 '*multifd-zlib-level': 'uint8',
1359 '*multifd-zstd-level': 'uint8',
1360 '*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ],
1361 '*x-vcpu-dirty-limit-period': { 'type': 'uint64',
1362 'features': [ 'unstable' ] },
1363 '*vcpu-dirty-limit': 'uint64',
1364 '*mode': 'MigMode'} }
1367 # @query-migrate-parameters:
1369 # Returns information about the current migration parameters
1371 # Returns: @MigrationParameters
1377 # -> { "execute": "query-migrate-parameters" }
1379 # "multifd-channels": 2,
1380 # "cpu-throttle-increment": 10,
1381 # "cpu-throttle-initial": 20,
1382 # "max-bandwidth": 33554432,
1383 # "downtime-limit": 300
1387 { 'command': 'query-migrate-parameters',
1388 'returns': 'MigrationParameters' }
1391 # @migrate-start-postcopy:
1393 # Followup to a migration command to switch the migration to postcopy
1394 # mode. The postcopy-ram capability must be set on both source and
1395 # destination before the original migration command.
1401 # -> { "execute": "migrate-start-postcopy" }
1402 # <- { "return": {} }
1404 { 'command': 'migrate-start-postcopy' }
1409 # Emitted when a migration event happens
1411 # @status: @MigrationStatus describing the current migration status.
1417 # <- {"timestamp": {"seconds": 1432121972, "microseconds": 744001},
1418 # "event": "MIGRATION",
1419 # "data": {"status": "completed"} }
1421 { 'event': 'MIGRATION',
1422 'data': {'status': 'MigrationStatus'}}
1427 # Emitted from the source side of a migration at the start of each
1428 # pass (when it syncs the dirty bitmap)
1430 # @pass: An incrementing count (starting at 1 on the first pass)
1436 # <- { "timestamp": {"seconds": 1449669631, "microseconds": 239225},
1437 # "event": "MIGRATION_PASS", "data": {"pass": 2} }
1439 { 'event': 'MIGRATION_PASS',
1440 'data': { 'pass': 'int' } }
1445 # The message transmission between Primary side and Secondary side.
1447 # @checkpoint-ready: Secondary VM (SVM) is ready for checkpointing
1449 # @checkpoint-request: Primary VM (PVM) tells SVM to prepare for
1452 # @checkpoint-reply: SVM gets PVM's checkpoint request
1454 # @vmstate-send: VM's state will be sent by PVM.
1456 # @vmstate-size: The total size of VMstate.
1458 # @vmstate-received: VM's state has been received by SVM.
1460 # @vmstate-loaded: VM's state has been loaded by SVM.
1464 { 'enum': 'COLOMessage',
1465 'data': [ 'checkpoint-ready', 'checkpoint-request', 'checkpoint-reply',
1466 'vmstate-send', 'vmstate-size', 'vmstate-received',
1467 'vmstate-loaded' ] }
1472 # The COLO current mode.
1474 # @none: COLO is disabled.
1476 # @primary: COLO node in primary side.
1478 # @secondary: COLO node in slave side.
1482 { 'enum': 'COLOMode',
1483 'data': [ 'none', 'primary', 'secondary'] }
1488 # An enumeration of COLO failover status
1490 # @none: no failover has ever happened
1492 # @require: got failover requirement but not handled
1494 # @active: in the process of doing failover
1496 # @completed: finish the process of failover
1498 # @relaunch: restart the failover process, from 'none' -> 'completed'
1503 { 'enum': 'FailoverStatus',
1504 'data': [ 'none', 'require', 'active', 'completed', 'relaunch' ] }
1509 # Emitted when VM finishes COLO mode due to some errors happening or
1510 # at the request of users.
1512 # @mode: report COLO mode when COLO exited.
1514 # @reason: describes the reason for the COLO exit.
1520 # <- { "timestamp": {"seconds": 2032141960, "microseconds": 417172},
1521 # "event": "COLO_EXIT", "data": {"mode": "primary", "reason": "request" } }
1523 { 'event': 'COLO_EXIT',
1524 'data': {'mode': 'COLOMode', 'reason': 'COLOExitReason' } }
1529 # The reason for a COLO exit.
1531 # @none: failover has never happened. This state does not occur in
1532 # the COLO_EXIT event, and is only visible in the result of
1533 # query-colo-status.
1535 # @request: COLO exit is due to an external request.
1537 # @error: COLO exit is due to an internal error.
1539 # @processing: COLO is currently handling a failover (since 4.0).
1543 { 'enum': 'COLOExitReason',
1544 'data': [ 'none', 'request', 'error' , 'processing' ] }
1547 # @x-colo-lost-heartbeat:
1549 # Tell qemu that heartbeat is lost, request it to do takeover
1550 # procedures. If this command is sent to the PVM, the Primary side
1551 # will exit COLO mode. If sent to the Secondary, the Secondary side
1552 # will run failover work, then takes over server operation to become
1557 # @unstable: This command is experimental.
1563 # -> { "execute": "x-colo-lost-heartbeat" }
1564 # <- { "return": {} }
1566 { 'command': 'x-colo-lost-heartbeat',
1567 'features': [ 'unstable' ],
1568 'if': 'CONFIG_REPLICATION' }
1573 # Cancel the current executing migration process.
1575 # Notes: This command succeeds even if there is no migration process
1582 # -> { "execute": "migrate_cancel" }
1583 # <- { "return": {} }
1585 { 'command': 'migrate_cancel' }
1588 # @migrate-continue:
1590 # Continue migration when it's in a paused state.
1592 # @state: The state the migration is currently expected to be in
1598 # -> { "execute": "migrate-continue" , "arguments":
1599 # { "state": "pre-switchover" } }
1600 # <- { "return": {} }
1602 { 'command': 'migrate-continue', 'data': {'state': 'MigrationStatus'} }
1605 # @MigrationAddressType:
1607 # The migration stream transport mechanisms.
1609 # @socket: Migrate via socket.
1611 # @exec: Direct the migration stream to another process.
1613 # @rdma: Migrate via RDMA.
1615 # @file: Direct the migration stream to a file.
1619 { 'enum': 'MigrationAddressType',
1620 'data': [ 'socket', 'exec', 'rdma', 'file' ] }
1623 # @FileMigrationArgs:
1625 # @filename: The file to receive the migration stream
1627 # @offset: The file offset where the migration stream will start
1631 { 'struct': 'FileMigrationArgs',
1632 'data': { 'filename': 'str',
1633 'offset': 'uint64' } }
1636 # @MigrationExecCommand:
1638 # @args: command (list head) and arguments to execute.
1642 { 'struct': 'MigrationExecCommand',
1643 'data': {'args': [ 'str' ] } }
1646 # @MigrationAddress:
1648 # Migration endpoint configuration.
1650 # @transport: The migration stream transport mechanism
1654 { 'union': 'MigrationAddress',
1655 'base': { 'transport' : 'MigrationAddressType'},
1656 'discriminator': 'transport',
1658 'socket': 'SocketAddress',
1659 'exec': 'MigrationExecCommand',
1660 'rdma': 'InetSocketAddress',
1661 'file': 'FileMigrationArgs' } }
1664 # @MigrationChannelType:
1666 # The migration channel-type request options.
1668 # @main: Main outbound migration channel.
1672 { 'enum': 'MigrationChannelType',
1673 'data': [ 'main' ] }
1676 # @MigrationChannel:
1678 # Migration stream channel parameters.
1680 # @channel-type: Channel type for transferring packet information.
1682 # @addr: Migration endpoint configuration on destination interface.
1686 { 'struct': 'MigrationChannel',
1688 'channel-type': 'MigrationChannelType',
1689 'addr': 'MigrationAddress' } }
1694 # Migrates the current running guest to another Virtual Machine.
1696 # @uri: the Uniform Resource Identifier of the destination VM
1698 # @channels: list of migration stream channels with each stream in the
1699 # list connected to a destination interface endpoint.
1701 # @blk: do block migration (full disk copy)
1703 # @inc: incremental disk copy migration
1705 # @detach: this argument exists only for compatibility reasons and is
1708 # @resume: resume one paused migration, default "off". (since 3.0)
1712 # @deprecated: Members @inc and @blk are deprecated. Use
1713 # blockdev-mirror with NBD instead.
1719 # 1. The 'query-migrate' command should be used to check
1720 # migration's progress and final result (this information is
1721 # provided by the 'status' member)
1723 # 2. All boolean arguments default to false
1725 # 3. The user Monitor's "detach" argument is invalid in QMP and
1726 # should not be used
1728 # 4. The uri argument should have the Uniform Resource Identifier
1729 # of default destination VM. This connection will be bound to
1732 # 5. For now, number of migration streams is restricted to one,
1733 # i.e number of items in 'channels' list is just 1.
1735 # 6. The 'uri' and 'channels' arguments are mutually exclusive;
1736 # exactly one of the two should be present.
1740 # -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } }
1741 # <- { "return": {} }
1743 # -> { "execute": "migrate",
1745 # "channels": [ { "channel-type": "main",
1746 # "addr": { "transport": "socket",
1748 # "host": "10.12.34.9",
1749 # "port": "1050" } } ] } }
1750 # <- { "return": {} }
1752 # -> { "execute": "migrate",
1754 # "channels": [ { "channel-type": "main",
1755 # "addr": { "transport": "exec",
1756 # "args": [ "/bin/nc", "-p", "6000",
1757 # "/some/sock" ] } } ] } }
1758 # <- { "return": {} }
1760 # -> { "execute": "migrate",
1762 # "channels": [ { "channel-type": "main",
1763 # "addr": { "transport": "rdma",
1764 # "host": "10.12.34.9",
1765 # "port": "1050" } } ] } }
1766 # <- { "return": {} }
1768 # -> { "execute": "migrate",
1770 # "channels": [ { "channel-type": "main",
1771 # "addr": { "transport": "file",
1772 # "filename": "/tmp/migfile",
1773 # "offset": "0x1000" } } ] } }
1774 # <- { "return": {} }
1777 { 'command': 'migrate',
1778 'data': {'*uri': 'str',
1779 '*channels': [ 'MigrationChannel' ],
1780 '*blk': { 'type': 'bool', 'features': [ 'deprecated' ] },
1781 '*inc': { 'type': 'bool', 'features': [ 'deprecated' ] },
1782 '*detach': 'bool', '*resume': 'bool' } }
1785 # @migrate-incoming:
1787 # Start an incoming migration, the qemu must have been started with
1790 # @uri: The Uniform Resource Identifier identifying the source or
1791 # address to listen on
1793 # @channels: list of migration stream channels with each stream in the
1794 # list connected to a destination interface endpoint.
1800 # 1. It's a bad idea to use a string for the uri, but it needs to
1801 # stay compatible with -incoming and the format of the uri is
1802 # already exposed above libvirt.
1804 # 2. QEMU must be started with -incoming defer to allow
1805 # migrate-incoming to be used.
1807 # 3. The uri format is the same as for -incoming
1809 # 4. For now, number of migration streams is restricted to one,
1810 # i.e number of items in 'channels' list is just 1.
1812 # 5. The 'uri' and 'channels' arguments are mutually exclusive;
1813 # exactly one of the two should be present.
1817 # -> { "execute": "migrate-incoming",
1818 # "arguments": { "uri": "tcp:0:4446" } }
1819 # <- { "return": {} }
1821 # -> { "execute": "migrate-incoming",
1823 # "channels": [ { "channel-type": "main",
1824 # "addr": { "transport": "socket",
1826 # "host": "10.12.34.9",
1827 # "port": "1050" } } ] } }
1828 # <- { "return": {} }
1830 # -> { "execute": "migrate-incoming",
1832 # "channels": [ { "channel-type": "main",
1833 # "addr": { "transport": "exec",
1834 # "args": [ "/bin/nc", "-p", "6000",
1835 # "/some/sock" ] } } ] } }
1836 # <- { "return": {} }
1838 # -> { "execute": "migrate-incoming",
1840 # "channels": [ { "channel-type": "main",
1841 # "addr": { "transport": "rdma",
1842 # "host": "10.12.34.9",
1843 # "port": "1050" } } ] } }
1844 # <- { "return": {} }
1846 { 'command': 'migrate-incoming',
1847 'data': {'*uri': 'str',
1848 '*channels': [ 'MigrationChannel' ] } }
1851 # @xen-save-devices-state:
1853 # Save the state of all devices to file. The RAM and the block
1854 # devices of the VM are not saved by this command.
1856 # @filename: the file to save the state of the devices to as binary
1857 # data. See xen-save-devices-state.txt for a description of the
1860 # @live: Optional argument to ask QEMU to treat this command as part
1861 # of a live migration. Default to true. (since 2.11)
1867 # -> { "execute": "xen-save-devices-state",
1868 # "arguments": { "filename": "/tmp/save" } }
1869 # <- { "return": {} }
1871 { 'command': 'xen-save-devices-state',
1872 'data': {'filename': 'str', '*live':'bool' } }
1875 # @xen-set-global-dirty-log:
1877 # Enable or disable the global dirty log mode.
1879 # @enable: true to enable, false to disable.
1885 # -> { "execute": "xen-set-global-dirty-log",
1886 # "arguments": { "enable": true } }
1887 # <- { "return": {} }
1889 { 'command': 'xen-set-global-dirty-log', 'data': { 'enable': 'bool' } }
1892 # @xen-load-devices-state:
1894 # Load the state of all devices from file. The RAM and the block
1895 # devices of the VM are not loaded by this command.
1897 # @filename: the file to load the state of the devices from as binary
1898 # data. See xen-save-devices-state.txt for a description of the
1905 # -> { "execute": "xen-load-devices-state",
1906 # "arguments": { "filename": "/tmp/resume" } }
1907 # <- { "return": {} }
1909 { 'command': 'xen-load-devices-state', 'data': {'filename': 'str'} }
1912 # @xen-set-replication:
1914 # Enable or disable replication.
1916 # @enable: true to enable, false to disable.
1918 # @primary: true for primary or false for secondary.
1920 # @failover: true to do failover, false to stop. but cannot be
1921 # specified if 'enable' is true. default value is false.
1925 # -> { "execute": "xen-set-replication",
1926 # "arguments": {"enable": true, "primary": false} }
1927 # <- { "return": {} }
1931 { 'command': 'xen-set-replication',
1932 'data': { 'enable': 'bool', 'primary': 'bool', '*failover': 'bool' },
1933 'if': 'CONFIG_REPLICATION' }
1936 # @ReplicationStatus:
1938 # The result format for 'query-xen-replication-status'.
1940 # @error: true if an error happened, false if replication is normal.
1942 # @desc: the human readable error description string, when @error is
1947 { 'struct': 'ReplicationStatus',
1948 'data': { 'error': 'bool', '*desc': 'str' },
1949 'if': 'CONFIG_REPLICATION' }
1952 # @query-xen-replication-status:
1954 # Query replication status while the vm is running.
1956 # Returns: A @ReplicationStatus object showing the status.
1960 # -> { "execute": "query-xen-replication-status" }
1961 # <- { "return": { "error": false } }
1965 { 'command': 'query-xen-replication-status',
1966 'returns': 'ReplicationStatus',
1967 'if': 'CONFIG_REPLICATION' }
1970 # @xen-colo-do-checkpoint:
1972 # Xen uses this command to notify replication to trigger a checkpoint.
1976 # -> { "execute": "xen-colo-do-checkpoint" }
1977 # <- { "return": {} }
1981 { 'command': 'xen-colo-do-checkpoint',
1982 'if': 'CONFIG_REPLICATION' }
1987 # The result format for 'query-colo-status'.
1989 # @mode: COLO running mode. If COLO is running, this field will
1990 # return 'primary' or 'secondary'.
1992 # @last-mode: COLO last running mode. If COLO is running, this field
1993 # will return same like mode field, after failover we can use this
1994 # field to get last colo mode. (since 4.0)
1996 # @reason: describes the reason for the COLO exit.
2000 { 'struct': 'COLOStatus',
2001 'data': { 'mode': 'COLOMode', 'last-mode': 'COLOMode',
2002 'reason': 'COLOExitReason' },
2003 'if': 'CONFIG_REPLICATION' }
2006 # @query-colo-status:
2008 # Query COLO status while the vm is running.
2010 # Returns: A @COLOStatus object showing the status.
2014 # -> { "execute": "query-colo-status" }
2015 # <- { "return": { "mode": "primary", "last-mode": "none", "reason": "request" } }
2019 { 'command': 'query-colo-status',
2020 'returns': 'COLOStatus',
2021 'if': 'CONFIG_REPLICATION' }
2026 # Provide a recovery migration stream URI.
2028 # @uri: the URI to be used for the recovery of migration stream.
2032 # -> { "execute": "migrate-recover",
2033 # "arguments": { "uri": "tcp:192.168.1.200:12345" } }
2034 # <- { "return": {} }
2038 { 'command': 'migrate-recover',
2039 'data': { 'uri': 'str' },
2045 # Pause a migration. Currently it only supports postcopy.
2049 # -> { "execute": "migrate-pause" }
2050 # <- { "return": {} }
2054 { 'command': 'migrate-pause', 'allow-oob': true }
2059 # Emitted from source side of a migration when migration state is
2060 # WAIT_UNPLUG. Device was unplugged by guest operating system. Device
2061 # resources in QEMU are kept on standby to be able to re-plug it in
2062 # case of migration failure.
2064 # @device-id: QEMU device id of the unplugged device
2070 # <- { "event": "UNPLUG_PRIMARY",
2071 # "data": { "device-id": "hostdev0" },
2072 # "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
2074 { 'event': 'UNPLUG_PRIMARY',
2075 'data': { 'device-id': 'str' } }
2080 # Dirty rate of vcpu.
2084 # @dirty-rate: dirty rate.
2088 { 'struct': 'DirtyRateVcpu',
2089 'data': { 'id': 'int', 'dirty-rate': 'int64' } }
2094 # Dirty page rate measurement status.
2096 # @unstarted: measuring thread has not been started yet
2098 # @measuring: measuring thread is running
2100 # @measured: dirty page rate is measured and the results are available
2104 { 'enum': 'DirtyRateStatus',
2105 'data': [ 'unstarted', 'measuring', 'measured'] }
2108 # @DirtyRateMeasureMode:
2110 # Method used to measure dirty page rate. Differences between
2111 # available methods are explained in @calc-dirty-rate.
2113 # @page-sampling: use page sampling
2115 # @dirty-ring: use dirty ring
2117 # @dirty-bitmap: use dirty bitmap
2121 { 'enum': 'DirtyRateMeasureMode',
2122 'data': ['page-sampling', 'dirty-ring', 'dirty-bitmap'] }
2127 # Specifies unit in which time-related value is specified.
2129 # @second: value is in seconds
2131 # @millisecond: value is in milliseconds
2136 { 'enum': 'TimeUnit',
2137 'data': ['second', 'millisecond'] }
2142 # Information about measured dirty page rate.
2144 # @dirty-rate: an estimate of the dirty page rate of the VM in units
2145 # of MiB/s. Value is present only when @status is 'measured'.
2147 # @status: current status of dirty page rate measurements
2149 # @start-time: start time in units of second for calculation
2151 # @calc-time: time period for which dirty page rate was measured,
2152 # expressed and rounded down to @calc-time-unit.
2154 # @calc-time-unit: time unit of @calc-time (Since 8.2)
2156 # @sample-pages: number of sampled pages per GiB of guest memory.
2157 # Valid only in page-sampling mode (Since 6.1)
2159 # @mode: mode that was used to measure dirty page rate (Since 6.2)
2161 # @vcpu-dirty-rate: dirty rate for each vCPU if dirty-ring mode was
2162 # specified (Since 6.2)
2166 { 'struct': 'DirtyRateInfo',
2167 'data': {'*dirty-rate': 'int64',
2168 'status': 'DirtyRateStatus',
2169 'start-time': 'int64',
2170 'calc-time': 'int64',
2171 'calc-time-unit': 'TimeUnit',
2172 'sample-pages': 'uint64',
2173 'mode': 'DirtyRateMeasureMode',
2174 '*vcpu-dirty-rate': [ 'DirtyRateVcpu' ] } }
2179 # Start measuring dirty page rate of the VM. Results can be retrieved
2180 # with @query-dirty-rate after measurements are completed.
2182 # Dirty page rate is the number of pages changed in a given time
2183 # period expressed in MiB/s. The following methods of calculation are
2186 # 1. In page sampling mode, a random subset of pages are selected and
2187 # hashed twice: once at the beginning of measurement time period,
2188 # and once again at the end. If two hashes for some page are
2189 # different, the page is counted as changed. Since this method
2190 # relies on sampling and hashing, calculated dirty page rate is
2191 # only an estimate of its true value. Increasing @sample-pages
2192 # improves estimation quality at the cost of higher computational
2195 # 2. Dirty bitmap mode captures writes to memory (for example by
2196 # temporarily revoking write access to all pages) and counting page
2197 # faults. Information about modified pages is collected into a
2198 # bitmap, where each bit corresponds to one guest page. This mode
2199 # requires that KVM accelerator property "dirty-ring-size" is *not*
2202 # 3. Dirty ring mode is similar to dirty bitmap mode, but the
2203 # information about modified pages is collected into ring buffer.
2204 # This mode tracks page modification per each vCPU separately. It
2205 # requires that KVM accelerator property "dirty-ring-size" is set.
2207 # @calc-time: time period for which dirty page rate is calculated.
2208 # By default it is specified in seconds, but the unit can be set
2209 # explicitly with @calc-time-unit. Note that larger @calc-time
2210 # values will typically result in smaller dirty page rates because
2211 # page dirtying is a one-time event. Once some page is counted
2212 # as dirty during @calc-time period, further writes to this page
2213 # will not increase dirty page rate anymore.
2215 # @calc-time-unit: time unit in which @calc-time is specified.
2216 # By default it is seconds. (Since 8.2)
2218 # @sample-pages: number of sampled pages per each GiB of guest memory.
2219 # Default value is 512. For 4KiB guest pages this corresponds to
2220 # sampling ratio of 0.2%. This argument is used only in page
2221 # sampling mode. (Since 6.1)
2223 # @mode: mechanism for tracking dirty pages. Default value is
2224 # 'page-sampling'. Others are 'dirty-bitmap' and 'dirty-ring'.
2231 # -> {"execute": "calc-dirty-rate", "arguments": {"calc-time": 1,
2232 # 'sample-pages': 512} }
2233 # <- { "return": {} }
2235 # Measure dirty rate using dirty bitmap for 500 milliseconds:
2237 # -> {"execute": "calc-dirty-rate", "arguments": {"calc-time": 500,
2238 # "calc-time-unit": "millisecond", "mode": "dirty-bitmap"} }
2240 # <- { "return": {} }
2242 { 'command': 'calc-dirty-rate', 'data': {'calc-time': 'int64',
2243 '*calc-time-unit': 'TimeUnit',
2244 '*sample-pages': 'int',
2245 '*mode': 'DirtyRateMeasureMode'} }
2248 # @query-dirty-rate:
2250 # Query results of the most recent invocation of @calc-dirty-rate.
2252 # @calc-time-unit: time unit in which to report calculation time.
2253 # By default it is reported in seconds. (Since 8.2)
2259 # 1. Measurement is in progress:
2261 # <- {"status": "measuring", "sample-pages": 512,
2262 # "mode": "page-sampling", "start-time": 1693900454, "calc-time": 10,
2263 # "calc-time-unit": "second"}
2265 # 2. Measurement has been completed:
2267 # <- {"status": "measured", "sample-pages": 512, "dirty-rate": 108,
2268 # "mode": "page-sampling", "start-time": 1693900454, "calc-time": 10,
2269 # "calc-time-unit": "second"}
2271 { 'command': 'query-dirty-rate', 'data': {'*calc-time-unit': 'TimeUnit' },
2272 'returns': 'DirtyRateInfo' }
2277 # Dirty page rate limit information of a virtual CPU.
2279 # @cpu-index: index of a virtual CPU.
2281 # @limit-rate: upper limit of dirty page rate (MB/s) for a virtual
2282 # CPU, 0 means unlimited.
2284 # @current-rate: current dirty page rate (MB/s) for a virtual CPU.
2288 { 'struct': 'DirtyLimitInfo',
2289 'data': { 'cpu-index': 'int',
2290 'limit-rate': 'uint64',
2291 'current-rate': 'uint64' } }
2294 # @set-vcpu-dirty-limit:
2296 # Set the upper limit of dirty page rate for virtual CPUs.
2298 # Requires KVM with accelerator property "dirty-ring-size" set. A
2299 # virtual CPU's dirty page rate is a measure of its memory load. To
2300 # observe dirty page rates, use @calc-dirty-rate.
2302 # @cpu-index: index of a virtual CPU, default is all.
2304 # @dirty-rate: upper limit of dirty page rate (MB/s) for virtual CPUs.
2310 # -> {"execute": "set-vcpu-dirty-limit"}
2311 # "arguments": { "dirty-rate": 200,
2312 # "cpu-index": 1 } }
2313 # <- { "return": {} }
2315 { 'command': 'set-vcpu-dirty-limit',
2316 'data': { '*cpu-index': 'int',
2317 'dirty-rate': 'uint64' } }
2320 # @cancel-vcpu-dirty-limit:
2322 # Cancel the upper limit of dirty page rate for virtual CPUs.
2324 # Cancel the dirty page limit for the vCPU which has been set with
2325 # set-vcpu-dirty-limit command. Note that this command requires
2326 # support from dirty ring, same as the "set-vcpu-dirty-limit".
2328 # @cpu-index: index of a virtual CPU, default is all.
2334 # -> {"execute": "cancel-vcpu-dirty-limit"},
2335 # "arguments": { "cpu-index": 1 } }
2336 # <- { "return": {} }
2338 { 'command': 'cancel-vcpu-dirty-limit',
2339 'data': { '*cpu-index': 'int'} }
2342 # @query-vcpu-dirty-limit:
2344 # Returns information about virtual CPU dirty page rate limits, if
2351 # -> {"execute": "query-vcpu-dirty-limit"}
2353 # { "limit-rate": 60, "current-rate": 3, "cpu-index": 0},
2354 # { "limit-rate": 60, "current-rate": 3, "cpu-index": 1}]}
2356 { 'command': 'query-vcpu-dirty-limit',
2357 'returns': [ 'DirtyLimitInfo' ] }
2360 # @MigrationThreadInfo:
2362 # Information about migrationthreads
2364 # @name: the name of migration thread
2366 # @thread-id: ID of the underlying host thread
2370 { 'struct': 'MigrationThreadInfo',
2371 'data': {'name': 'str',
2372 'thread-id': 'int'} }
2375 # @query-migrationthreads:
2377 # Returns information of migration threads
2379 # data: migration thread name
2381 # Returns: information about migration threads
2385 { 'command': 'query-migrationthreads',
2386 'returns': ['MigrationThreadInfo'] }
2391 # Save a VM snapshot
2393 # @job-id: identifier for the newly created job
2395 # @tag: name of the snapshot to create
2397 # @vmstate: block device node name to save vmstate to
2399 # @devices: list of block device node names to save a snapshot to
2401 # Applications should not assume that the snapshot save is complete
2402 # when this command returns. The job commands / events must be used
2403 # to determine completion and to fetch details of any errors that
2406 # Note that execution of the guest CPUs may be stopped during the time
2407 # it takes to save the snapshot. A future version of QEMU may ensure
2408 # CPUs are executing continuously.
2410 # It is strongly recommended that @devices contain all writable block
2411 # device nodes if a consistent snapshot is required.
2413 # If @tag already exists, an error will be reported
2417 # -> { "execute": "snapshot-save",
2419 # "job-id": "snapsave0",
2421 # "vmstate": "disk0",
2422 # "devices": ["disk0", "disk1"]
2425 # <- { "return": { } }
2426 # <- {"event": "JOB_STATUS_CHANGE",
2427 # "timestamp": {"seconds": 1432121972, "microseconds": 744001},
2428 # "data": {"status": "created", "id": "snapsave0"}}
2429 # <- {"event": "JOB_STATUS_CHANGE",
2430 # "timestamp": {"seconds": 1432122172, "microseconds": 744001},
2431 # "data": {"status": "running", "id": "snapsave0"}}
2432 # <- {"event": "STOP",
2433 # "timestamp": {"seconds": 1432122372, "microseconds": 744001} }
2434 # <- {"event": "RESUME",
2435 # "timestamp": {"seconds": 1432122572, "microseconds": 744001} }
2436 # <- {"event": "JOB_STATUS_CHANGE",
2437 # "timestamp": {"seconds": 1432122772, "microseconds": 744001},
2438 # "data": {"status": "waiting", "id": "snapsave0"}}
2439 # <- {"event": "JOB_STATUS_CHANGE",
2440 # "timestamp": {"seconds": 1432122972, "microseconds": 744001},
2441 # "data": {"status": "pending", "id": "snapsave0"}}
2442 # <- {"event": "JOB_STATUS_CHANGE",
2443 # "timestamp": {"seconds": 1432123172, "microseconds": 744001},
2444 # "data": {"status": "concluded", "id": "snapsave0"}}
2445 # -> {"execute": "query-jobs"}
2446 # <- {"return": [{"current-progress": 1,
2447 # "status": "concluded",
2448 # "total-progress": 1,
2449 # "type": "snapshot-save",
2450 # "id": "snapsave0"}]}
2454 { 'command': 'snapshot-save',
2455 'data': { 'job-id': 'str',
2458 'devices': ['str'] } }
2463 # Load a VM snapshot
2465 # @job-id: identifier for the newly created job
2467 # @tag: name of the snapshot to load.
2469 # @vmstate: block device node name to load vmstate from
2471 # @devices: list of block device node names to load a snapshot from
2473 # Applications should not assume that the snapshot load is complete
2474 # when this command returns. The job commands / events must be used
2475 # to determine completion and to fetch details of any errors that
2478 # Note that execution of the guest CPUs will be stopped during the
2479 # time it takes to load the snapshot.
2481 # It is strongly recommended that @devices contain all writable block
2482 # device nodes that can have changed since the original @snapshot-save
2483 # command execution.
2487 # -> { "execute": "snapshot-load",
2489 # "job-id": "snapload0",
2491 # "vmstate": "disk0",
2492 # "devices": ["disk0", "disk1"]
2495 # <- { "return": { } }
2496 # <- {"event": "JOB_STATUS_CHANGE",
2497 # "timestamp": {"seconds": 1472124172, "microseconds": 744001},
2498 # "data": {"status": "created", "id": "snapload0"}}
2499 # <- {"event": "JOB_STATUS_CHANGE",
2500 # "timestamp": {"seconds": 1472125172, "microseconds": 744001},
2501 # "data": {"status": "running", "id": "snapload0"}}
2502 # <- {"event": "STOP",
2503 # "timestamp": {"seconds": 1472125472, "microseconds": 744001} }
2504 # <- {"event": "RESUME",
2505 # "timestamp": {"seconds": 1472125872, "microseconds": 744001} }
2506 # <- {"event": "JOB_STATUS_CHANGE",
2507 # "timestamp": {"seconds": 1472126172, "microseconds": 744001},
2508 # "data": {"status": "waiting", "id": "snapload0"}}
2509 # <- {"event": "JOB_STATUS_CHANGE",
2510 # "timestamp": {"seconds": 1472127172, "microseconds": 744001},
2511 # "data": {"status": "pending", "id": "snapload0"}}
2512 # <- {"event": "JOB_STATUS_CHANGE",
2513 # "timestamp": {"seconds": 1472128172, "microseconds": 744001},
2514 # "data": {"status": "concluded", "id": "snapload0"}}
2515 # -> {"execute": "query-jobs"}
2516 # <- {"return": [{"current-progress": 1,
2517 # "status": "concluded",
2518 # "total-progress": 1,
2519 # "type": "snapshot-load",
2520 # "id": "snapload0"}]}
2524 { 'command': 'snapshot-load',
2525 'data': { 'job-id': 'str',
2528 'devices': ['str'] } }
2533 # Delete a VM snapshot
2535 # @job-id: identifier for the newly created job
2537 # @tag: name of the snapshot to delete.
2539 # @devices: list of block device node names to delete a snapshot from
2541 # Applications should not assume that the snapshot delete is complete
2542 # when this command returns. The job commands / events must be used
2543 # to determine completion and to fetch details of any errors that
2548 # -> { "execute": "snapshot-delete",
2550 # "job-id": "snapdelete0",
2552 # "devices": ["disk0", "disk1"]
2555 # <- { "return": { } }
2556 # <- {"event": "JOB_STATUS_CHANGE",
2557 # "timestamp": {"seconds": 1442124172, "microseconds": 744001},
2558 # "data": {"status": "created", "id": "snapdelete0"}}
2559 # <- {"event": "JOB_STATUS_CHANGE",
2560 # "timestamp": {"seconds": 1442125172, "microseconds": 744001},
2561 # "data": {"status": "running", "id": "snapdelete0"}}
2562 # <- {"event": "JOB_STATUS_CHANGE",
2563 # "timestamp": {"seconds": 1442126172, "microseconds": 744001},
2564 # "data": {"status": "waiting", "id": "snapdelete0"}}
2565 # <- {"event": "JOB_STATUS_CHANGE",
2566 # "timestamp": {"seconds": 1442127172, "microseconds": 744001},
2567 # "data": {"status": "pending", "id": "snapdelete0"}}
2568 # <- {"event": "JOB_STATUS_CHANGE",
2569 # "timestamp": {"seconds": 1442128172, "microseconds": 744001},
2570 # "data": {"status": "concluded", "id": "snapdelete0"}}
2571 # -> {"execute": "query-jobs"}
2572 # <- {"return": [{"current-progress": 1,
2573 # "status": "concluded",
2574 # "total-progress": 1,
2575 # "type": "snapshot-delete",
2576 # "id": "snapdelete0"}]}
2580 { 'command': 'snapshot-delete',
2581 'data': { 'job-id': 'str',
2583 'devices': ['str'] } }