2 * QEMU float support macros
4 * The code in this source file is derived from release 2a of the SoftFloat
5 * IEC/IEEE Floating-point Arithmetic Package. Those parts of the code (and
6 * some later contributions) are provided under that license, as detailed below.
7 * It has subsequently been modified by contributors to the QEMU Project,
8 * so some portions are provided under:
9 * the SoftFloat-2a license
13 * Any future contributions to this file after December 1st 2014 will be
14 * taken to be licensed under the Softfloat-2a license unless specifically
15 * indicated otherwise.
19 ===============================================================================
20 This C source fragment is part of the SoftFloat IEC/IEEE Floating-point
21 Arithmetic Package, Release 2a.
23 Written by John R. Hauser. This work was made possible in part by the
24 International Computer Science Institute, located at Suite 600, 1947 Center
25 Street, Berkeley, California 94704. Funding was partially provided by the
26 National Science Foundation under grant MIP-9311980. The original version
27 of this code was written as part of a project to build a fixed-point vector
28 processor in collaboration with the University of California at Berkeley,
29 overseen by Profs. Nelson Morgan and John Wawrzynek. More information
30 is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
31 arithmetic/SoftFloat.html'.
33 THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort
34 has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
35 TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO
36 PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
37 AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
39 Derivative works are acceptable, even for commercial purposes, so long as
40 (1) they include prominent notice that the work is derivative, and (2) they
41 include prominent notice akin to these four paragraphs for those parts of
42 this code that are retained.
44 ===============================================================================
48 * Copyright (c) 2006, Fabrice Bellard
49 * All rights reserved.
51 * Redistribution and use in source and binary forms, with or without
52 * modification, are permitted provided that the following conditions are met:
54 * 1. Redistributions of source code must retain the above copyright notice,
55 * this list of conditions and the following disclaimer.
57 * 2. Redistributions in binary form must reproduce the above copyright notice,
58 * this list of conditions and the following disclaimer in the documentation
59 * and/or other materials provided with the distribution.
61 * 3. Neither the name of the copyright holder nor the names of its contributors
62 * may be used to endorse or promote products derived from this software without
63 * specific prior written permission.
65 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
66 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
67 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
68 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
69 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
70 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
71 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
72 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
73 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
74 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
75 * THE POSSIBILITY OF SUCH DAMAGE.
78 /* Portions of this work are licensed under the terms of the GNU GPL,
79 * version 2 or later. See the COPYING file in the top-level directory.
82 #ifndef FPU_SOFTFLOAT_MACROS_H
83 #define FPU_SOFTFLOAT_MACROS_H
85 /*----------------------------------------------------------------------------
86 | Shifts `a' right by the number of bits given in `count'. If any nonzero
87 | bits are shifted off, they are ``jammed'' into the least significant bit of
88 | the result by setting the least significant bit to 1. The value of `count'
89 | can be arbitrarily large; in particular, if `count' is greater than 32, the
90 | result will be either 0 or 1, depending on whether `a' is zero or nonzero.
91 | The result is stored in the location pointed to by `zPtr'.
92 *----------------------------------------------------------------------------*/
94 static inline void shift32RightJamming(uint32_t a
, int count
, uint32_t *zPtr
)
101 else if ( count
< 32 ) {
102 z
= ( a
>>count
) | ( ( a
<<( ( - count
) & 31 ) ) != 0 );
111 /*----------------------------------------------------------------------------
112 | Shifts `a' right by the number of bits given in `count'. If any nonzero
113 | bits are shifted off, they are ``jammed'' into the least significant bit of
114 | the result by setting the least significant bit to 1. The value of `count'
115 | can be arbitrarily large; in particular, if `count' is greater than 64, the
116 | result will be either 0 or 1, depending on whether `a' is zero or nonzero.
117 | The result is stored in the location pointed to by `zPtr'.
118 *----------------------------------------------------------------------------*/
120 static inline void shift64RightJamming(uint64_t a
, int count
, uint64_t *zPtr
)
127 else if ( count
< 64 ) {
128 z
= ( a
>>count
) | ( ( a
<<( ( - count
) & 63 ) ) != 0 );
137 /*----------------------------------------------------------------------------
138 | Shifts the 128-bit value formed by concatenating `a0' and `a1' right by 64
139 | _plus_ the number of bits given in `count'. The shifted result is at most
140 | 64 nonzero bits; this is stored at the location pointed to by `z0Ptr'. The
141 | bits shifted off form a second 64-bit result as follows: The _last_ bit
142 | shifted off is the most-significant bit of the extra result, and the other
143 | 63 bits of the extra result are all zero if and only if _all_but_the_last_
144 | bits shifted off were all zero. This extra result is stored in the location
145 | pointed to by `z1Ptr'. The value of `count' can be arbitrarily large.
146 | (This routine makes more sense if `a0' and `a1' are considered to form a
147 | fixed-point value with binary point between `a0' and `a1'. This fixed-point
148 | value is shifted right by the number of bits given in `count', and the
149 | integer part of the result is returned at the location pointed to by
150 | `z0Ptr'. The fractional part of the result may be slightly corrupted as
151 | described above, and is returned at the location pointed to by `z1Ptr'.)
152 *----------------------------------------------------------------------------*/
155 shift64ExtraRightJamming(
156 uint64_t a0
, uint64_t a1
, int count
, uint64_t *z0Ptr
, uint64_t *z1Ptr
)
159 int8_t negCount
= ( - count
) & 63;
165 else if ( count
< 64 ) {
166 z1
= ( a0
<<negCount
) | ( a1
!= 0 );
171 z1
= a0
| ( a1
!= 0 );
174 z1
= ( ( a0
| a1
) != 0 );
183 /*----------------------------------------------------------------------------
184 | Shifts the 128-bit value formed by concatenating `a0' and `a1' right by the
185 | number of bits given in `count'. Any bits shifted off are lost. The value
186 | of `count' can be arbitrarily large; in particular, if `count' is greater
187 | than 128, the result will be 0. The result is broken into two 64-bit pieces
188 | which are stored at the locations pointed to by `z0Ptr' and `z1Ptr'.
189 *----------------------------------------------------------------------------*/
193 uint64_t a0
, uint64_t a1
, int count
, uint64_t *z0Ptr
, uint64_t *z1Ptr
)
196 int8_t negCount
= ( - count
) & 63;
202 else if ( count
< 64 ) {
203 z1
= ( a0
<<negCount
) | ( a1
>>count
);
207 z1
= (count
< 128) ? (a0
>> (count
& 63)) : 0;
215 /*----------------------------------------------------------------------------
216 | Shifts the 128-bit value formed by concatenating `a0' and `a1' right by the
217 | number of bits given in `count'. If any nonzero bits are shifted off, they
218 | are ``jammed'' into the least significant bit of the result by setting the
219 | least significant bit to 1. The value of `count' can be arbitrarily large;
220 | in particular, if `count' is greater than 128, the result will be either
221 | 0 or 1, depending on whether the concatenation of `a0' and `a1' is zero or
222 | nonzero. The result is broken into two 64-bit pieces which are stored at
223 | the locations pointed to by `z0Ptr' and `z1Ptr'.
224 *----------------------------------------------------------------------------*/
227 shift128RightJamming(
228 uint64_t a0
, uint64_t a1
, int count
, uint64_t *z0Ptr
, uint64_t *z1Ptr
)
231 int8_t negCount
= ( - count
) & 63;
237 else if ( count
< 64 ) {
238 z1
= ( a0
<<negCount
) | ( a1
>>count
) | ( ( a1
<<negCount
) != 0 );
243 z1
= a0
| ( a1
!= 0 );
245 else if ( count
< 128 ) {
246 z1
= ( a0
>>( count
& 63 ) ) | ( ( ( a0
<<negCount
) | a1
) != 0 );
249 z1
= ( ( a0
| a1
) != 0 );
258 /*----------------------------------------------------------------------------
259 | Shifts the 192-bit value formed by concatenating `a0', `a1', and `a2' right
260 | by 64 _plus_ the number of bits given in `count'. The shifted result is
261 | at most 128 nonzero bits; these are broken into two 64-bit pieces which are
262 | stored at the locations pointed to by `z0Ptr' and `z1Ptr'. The bits shifted
263 | off form a third 64-bit result as follows: The _last_ bit shifted off is
264 | the most-significant bit of the extra result, and the other 63 bits of the
265 | extra result are all zero if and only if _all_but_the_last_ bits shifted off
266 | were all zero. This extra result is stored in the location pointed to by
267 | `z2Ptr'. The value of `count' can be arbitrarily large.
268 | (This routine makes more sense if `a0', `a1', and `a2' are considered
269 | to form a fixed-point value with binary point between `a1' and `a2'. This
270 | fixed-point value is shifted right by the number of bits given in `count',
271 | and the integer part of the result is returned at the locations pointed to
272 | by `z0Ptr' and `z1Ptr'. The fractional part of the result may be slightly
273 | corrupted as described above, and is returned at the location pointed to by
275 *----------------------------------------------------------------------------*/
278 shift128ExtraRightJamming(
289 int8_t negCount
= ( - count
) & 63;
299 z1
= ( a0
<<negCount
) | ( a1
>>count
);
311 z1
= a0
>>( count
& 63 );
314 z2
= ( count
== 128 ) ? a0
: ( a0
!= 0 );
328 /*----------------------------------------------------------------------------
329 | Shifts the 128-bit value formed by concatenating `a0' and `a1' left by the
330 | number of bits given in `count'. Any bits shifted off are lost. The value
331 | of `count' must be less than 64. The result is broken into two 64-bit
332 | pieces which are stored at the locations pointed to by `z0Ptr' and `z1Ptr'.
333 *----------------------------------------------------------------------------*/
335 static inline void shortShift128Left(uint64_t a0
, uint64_t a1
, int count
,
336 uint64_t *z0Ptr
, uint64_t *z1Ptr
)
338 *z1Ptr
= a1
<< count
;
339 *z0Ptr
= count
== 0 ? a0
: (a0
<< count
) | (a1
>> (-count
& 63));
342 /*----------------------------------------------------------------------------
343 | Shifts the 128-bit value formed by concatenating `a0' and `a1' left by the
344 | number of bits given in `count'. Any bits shifted off are lost. The value
345 | of `count' may be greater than 64. The result is broken into two 64-bit
346 | pieces which are stored at the locations pointed to by `z0Ptr' and `z1Ptr'.
347 *----------------------------------------------------------------------------*/
349 static inline void shift128Left(uint64_t a0
, uint64_t a1
, int count
,
350 uint64_t *z0Ptr
, uint64_t *z1Ptr
)
353 *z1Ptr
= a1
<< count
;
354 *z0Ptr
= count
== 0 ? a0
: (a0
<< count
) | (a1
>> (-count
& 63));
357 *z0Ptr
= a1
<< (count
- 64);
361 /*----------------------------------------------------------------------------
362 | Shifts the 192-bit value formed by concatenating `a0', `a1', and `a2' left
363 | by the number of bits given in `count'. Any bits shifted off are lost.
364 | The value of `count' must be less than 64. The result is broken into three
365 | 64-bit pieces which are stored at the locations pointed to by `z0Ptr',
366 | `z1Ptr', and `z2Ptr'.
367 *----------------------------------------------------------------------------*/
387 negCount
= ( ( - count
) & 63 );
397 /*----------------------------------------------------------------------------
398 | Adds the 128-bit value formed by concatenating `a0' and `a1' to the 128-bit
399 | value formed by concatenating `b0' and `b1'. Addition is modulo 2^128, so
400 | any carry out is lost. The result is broken into two 64-bit pieces which
401 | are stored at the locations pointed to by `z0Ptr' and `z1Ptr'.
402 *----------------------------------------------------------------------------*/
406 uint64_t a0
, uint64_t a1
, uint64_t b0
, uint64_t b1
, uint64_t *z0Ptr
, uint64_t *z1Ptr
)
412 *z0Ptr
= a0
+ b0
+ ( z1
< a1
);
416 /*----------------------------------------------------------------------------
417 | Adds the 192-bit value formed by concatenating `a0', `a1', and `a2' to the
418 | 192-bit value formed by concatenating `b0', `b1', and `b2'. Addition is
419 | modulo 2^192, so any carry out is lost. The result is broken into three
420 | 64-bit pieces which are stored at the locations pointed to by `z0Ptr',
421 | `z1Ptr', and `z2Ptr'.
422 *----------------------------------------------------------------------------*/
438 int8_t carry0
, carry1
;
441 carry1
= ( z2
< a2
);
443 carry0
= ( z1
< a1
);
446 z0
+= ( z1
< carry1
);
454 /*----------------------------------------------------------------------------
455 | Subtracts the 128-bit value formed by concatenating `b0' and `b1' from the
456 | 128-bit value formed by concatenating `a0' and `a1'. Subtraction is modulo
457 | 2^128, so any borrow out (carry out) is lost. The result is broken into two
458 | 64-bit pieces which are stored at the locations pointed to by `z0Ptr' and
460 *----------------------------------------------------------------------------*/
464 uint64_t a0
, uint64_t a1
, uint64_t b0
, uint64_t b1
, uint64_t *z0Ptr
, uint64_t *z1Ptr
)
468 *z0Ptr
= a0
- b0
- ( a1
< b1
);
472 /*----------------------------------------------------------------------------
473 | Subtracts the 192-bit value formed by concatenating `b0', `b1', and `b2'
474 | from the 192-bit value formed by concatenating `a0', `a1', and `a2'.
475 | Subtraction is modulo 2^192, so any borrow out (carry out) is lost. The
476 | result is broken into three 64-bit pieces which are stored at the locations
477 | pointed to by `z0Ptr', `z1Ptr', and `z2Ptr'.
478 *----------------------------------------------------------------------------*/
494 int8_t borrow0
, borrow1
;
497 borrow1
= ( a2
< b2
);
499 borrow0
= ( a1
< b1
);
501 z0
-= ( z1
< borrow1
);
510 /*----------------------------------------------------------------------------
511 | Multiplies `a' by `b' to obtain a 128-bit product. The product is broken
512 | into two 64-bit pieces which are stored at the locations pointed to by
513 | `z0Ptr' and `z1Ptr'.
514 *----------------------------------------------------------------------------*/
516 static inline void mul64To128( uint64_t a
, uint64_t b
, uint64_t *z0Ptr
, uint64_t *z1Ptr
)
518 uint32_t aHigh
, aLow
, bHigh
, bLow
;
519 uint64_t z0
, zMiddleA
, zMiddleB
, z1
;
525 z1
= ( (uint64_t) aLow
) * bLow
;
526 zMiddleA
= ( (uint64_t) aLow
) * bHigh
;
527 zMiddleB
= ( (uint64_t) aHigh
) * bLow
;
528 z0
= ( (uint64_t) aHigh
) * bHigh
;
529 zMiddleA
+= zMiddleB
;
530 z0
+= ( ( (uint64_t) ( zMiddleA
< zMiddleB
) )<<32 ) + ( zMiddleA
>>32 );
533 z0
+= ( z1
< zMiddleA
);
539 /*----------------------------------------------------------------------------
540 | Multiplies the 128-bit value formed by concatenating `a0' and `a1' by
541 | `b' to obtain a 192-bit product. The product is broken into three 64-bit
542 | pieces which are stored at the locations pointed to by `z0Ptr', `z1Ptr', and
544 *----------------------------------------------------------------------------*/
556 uint64_t z0
, z1
, z2
, more1
;
558 mul64To128( a1
, b
, &z1
, &z2
);
559 mul64To128( a0
, b
, &z0
, &more1
);
560 add128( z0
, more1
, 0, z1
, &z0
, &z1
);
567 /*----------------------------------------------------------------------------
568 | Multiplies the 128-bit value formed by concatenating `a0' and `a1' to the
569 | 128-bit value formed by concatenating `b0' and `b1' to obtain a 256-bit
570 | product. The product is broken into four 64-bit pieces which are stored at
571 | the locations pointed to by `z0Ptr', `z1Ptr', `z2Ptr', and `z3Ptr'.
572 *----------------------------------------------------------------------------*/
586 uint64_t z0
, z1
, z2
, z3
;
587 uint64_t more1
, more2
;
589 mul64To128( a1
, b1
, &z2
, &z3
);
590 mul64To128( a1
, b0
, &z1
, &more2
);
591 add128( z1
, more2
, 0, z2
, &z1
, &z2
);
592 mul64To128( a0
, b0
, &z0
, &more1
);
593 add128( z0
, more1
, 0, z1
, &z0
, &z1
);
594 mul64To128( a0
, b1
, &more1
, &more2
);
595 add128( more1
, more2
, 0, z2
, &more1
, &z2
);
596 add128( z0
, z1
, 0, more1
, &z0
, &z1
);
604 /*----------------------------------------------------------------------------
605 | Returns an approximation to the 64-bit integer quotient obtained by dividing
606 | `b' into the 128-bit value formed by concatenating `a0' and `a1'. The
607 | divisor `b' must be at least 2^63. If q is the exact quotient truncated
608 | toward zero, the approximation returned lies between q and q + 2 inclusive.
609 | If the exact quotient q is larger than 64 bits, the maximum positive 64-bit
610 | unsigned integer is returned.
611 *----------------------------------------------------------------------------*/
613 static inline uint64_t estimateDiv128To64(uint64_t a0
, uint64_t a1
, uint64_t b
)
616 uint64_t rem0
, rem1
, term0
, term1
;
619 if ( b
<= a0
) return LIT64( 0xFFFFFFFFFFFFFFFF );
621 z
= ( b0
<<32 <= a0
) ? LIT64( 0xFFFFFFFF00000000 ) : ( a0
/ b0
)<<32;
622 mul64To128( b
, z
, &term0
, &term1
);
623 sub128( a0
, a1
, term0
, term1
, &rem0
, &rem1
);
624 while ( ( (int64_t) rem0
) < 0 ) {
625 z
-= LIT64( 0x100000000 );
627 add128( rem0
, rem1
, b0
, b1
, &rem0
, &rem1
);
629 rem0
= ( rem0
<<32 ) | ( rem1
>>32 );
630 z
|= ( b0
<<32 <= rem0
) ? 0xFFFFFFFF : rem0
/ b0
;
635 /* From the GNU Multi Precision Library - longlong.h __udiv_qrnnd
636 * (https://gmplib.org/repo/gmp/file/tip/longlong.h)
638 * Licensed under the GPLv2/LGPLv3
640 static inline uint64_t udiv_qrnnd(uint64_t *r
, uint64_t n1
,
641 uint64_t n0
, uint64_t d
)
643 #if defined(__x86_64__)
645 asm("divq %4" : "=a"(q
), "=d"(*r
) : "0"(n0
), "1"(n1
), "rm"(d
));
647 #elif defined(__s390x__) && !defined(__clang__)
648 /* Need to use a TImode type to get an even register pair for DLGR. */
649 unsigned __int128 n
= (unsigned __int128
)n1
<< 64 | n0
;
650 asm("dlgr %0, %1" : "+r"(n
) : "r"(d
));
653 #elif defined(_ARCH_PPC64) && defined(_ARCH_PWR7)
654 /* From Power ISA 2.06, programming note for divdeu. */
655 uint64_t q1
, q2
, Q
, r1
, r2
, R
;
656 asm("divdeu %0,%2,%4; divdu %1,%3,%4"
657 : "=&r"(q1
), "=r"(q2
)
658 : "r"(n1
), "r"(n0
), "r"(d
));
659 r1
= -(q1
* d
); /* low part of (n1<<64) - (q1 * d) */
663 if (R
>= d
|| R
< r2
) { /* overflow implies R > d */
670 uint64_t d0
, d1
, q0
, q1
, r1
, r0
, m
;
678 r1
= (r1
<< 32) | (n0
>> 32);
694 r0
= (r0
<< 32) | (uint32_t)n0
;
708 return (q1
<< 32) | q0
;
712 /*----------------------------------------------------------------------------
713 | Returns an approximation to the square root of the 32-bit significand given
714 | by `a'. Considered as an integer, `a' must be at least 2^31. If bit 0 of
715 | `aExp' (the least significant bit) is 1, the integer returned approximates
716 | 2^31*sqrt(`a'/2^31), where `a' is considered an integer. If bit 0 of `aExp'
717 | is 0, the integer returned approximates 2^31*sqrt(`a'/2^30). In either
718 | case, the approximation returned lies strictly within +/-2 of the exact
720 *----------------------------------------------------------------------------*/
722 static inline uint32_t estimateSqrt32(int aExp
, uint32_t a
)
724 static const uint16_t sqrtOddAdjustments
[] = {
725 0x0004, 0x0022, 0x005D, 0x00B1, 0x011D, 0x019F, 0x0236, 0x02E0,
726 0x039C, 0x0468, 0x0545, 0x0631, 0x072B, 0x0832, 0x0946, 0x0A67
728 static const uint16_t sqrtEvenAdjustments
[] = {
729 0x0A2D, 0x08AF, 0x075A, 0x0629, 0x051A, 0x0429, 0x0356, 0x029E,
730 0x0200, 0x0179, 0x0109, 0x00AF, 0x0068, 0x0034, 0x0012, 0x0002
735 index
= ( a
>>27 ) & 15;
737 z
= 0x4000 + ( a
>>17 ) - sqrtOddAdjustments
[ (int)index
];
738 z
= ( ( a
/ z
)<<14 ) + ( z
<<15 );
742 z
= 0x8000 + ( a
>>17 ) - sqrtEvenAdjustments
[ (int)index
];
744 z
= ( 0x20000 <= z
) ? 0xFFFF8000 : ( z
<<15 );
745 if ( z
<= a
) return (uint32_t) ( ( (int32_t) a
)>>1 );
747 return ( (uint32_t) ( ( ( (uint64_t) a
)<<31 ) / z
) ) + ( z
>>1 );
751 /*----------------------------------------------------------------------------
752 | Returns 1 if the 128-bit value formed by concatenating `a0' and `a1'
753 | is equal to the 128-bit value formed by concatenating `b0' and `b1'.
754 | Otherwise, returns 0.
755 *----------------------------------------------------------------------------*/
757 static inline flag
eq128( uint64_t a0
, uint64_t a1
, uint64_t b0
, uint64_t b1
)
760 return ( a0
== b0
) && ( a1
== b1
);
764 /*----------------------------------------------------------------------------
765 | Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is less
766 | than or equal to the 128-bit value formed by concatenating `b0' and `b1'.
767 | Otherwise, returns 0.
768 *----------------------------------------------------------------------------*/
770 static inline flag
le128( uint64_t a0
, uint64_t a1
, uint64_t b0
, uint64_t b1
)
773 return ( a0
< b0
) || ( ( a0
== b0
) && ( a1
<= b1
) );
777 /*----------------------------------------------------------------------------
778 | Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is less
779 | than the 128-bit value formed by concatenating `b0' and `b1'. Otherwise,
781 *----------------------------------------------------------------------------*/
783 static inline flag
lt128( uint64_t a0
, uint64_t a1
, uint64_t b0
, uint64_t b1
)
786 return ( a0
< b0
) || ( ( a0
== b0
) && ( a1
< b1
) );
790 /*----------------------------------------------------------------------------
791 | Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is
792 | not equal to the 128-bit value formed by concatenating `b0' and `b1'.
793 | Otherwise, returns 0.
794 *----------------------------------------------------------------------------*/
796 static inline flag
ne128( uint64_t a0
, uint64_t a1
, uint64_t b0
, uint64_t b1
)
799 return ( a0
!= b0
) || ( a1
!= b1
);