hw/arm/mainstone.c

   1 /*
   2  * PXA270-based Intel Mainstone platforms.
   3  *
   4  * Copyright (c) 2007 by Armin Kuster <akuster@kama-aina.net> or
   5  *                                    <akuster@mvista.com>
   6  *
   7  * Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
   8  *
   9  * This code is licensed under the GNU GPL v2.
  10  *
  11  * Contributions after 2012-01-13 are licensed under the terms of the
  12  * GNU GPL, version 2 or (at your option) any later version.
  13  */
  14 #include "hw/hw.h"
  15 #include "hw/arm/pxa.h"
  16 #include "hw/arm/arm.h"
  17 #include "net/net.h"
  18 #include "hw/devices.h"
  19 #include "hw/boards.h"
  20 #include "hw/block/flash.h"
  21 #include "sysemu/block-backend.h"
  22 #include "hw/sysbus.h"
  23 #include "exec/address-spaces.h"
  24 #include "sysemu/qtest.h"
  25
  26 /* Device addresses */
  27 #define MST_FPGA_PHYS   0x08000000
  28 #define MST_ETH_PHYS    0x10000300
  29 #define MST_FLASH_0             0x00000000
  30 #define MST_FLASH_1             0x04000000
  31
  32 /* IRQ definitions */
  33 #define MMC_IRQ       0
  34 #define USIM_IRQ      1
  35 #define USBC_IRQ      2
  36 #define ETHERNET_IRQ  3
  37 #define AC97_IRQ      4
  38 #define PEN_IRQ       5
  39 #define MSINS_IRQ     6
  40 #define EXBRD_IRQ     7
  41 #define S0_CD_IRQ     9
  42 #define S0_STSCHG_IRQ 10
  43 #define S0_IRQ        11
  44 #define S1_CD_IRQ     13
  45 #define S1_STSCHG_IRQ 14
  46 #define S1_IRQ        15
  47
  48 static const struct keymap map[0xE0] = {
  49     [0 ... 0xDF] = { -1, -1 },
  50     [0x1e] = {0,0}, /* a */
  51     [0x30] = {0,1}, /* b */
  52     [0x2e] = {0,2}, /* c */
  53     [0x20] = {0,3}, /* d */
  54     [0x12] = {0,4}, /* e */
  55     [0x21] = {0,5}, /* f */
  56     [0x22] = {1,0}, /* g */
  57     [0x23] = {1,1}, /* h */
  58     [0x17] = {1,2}, /* i */
  59     [0x24] = {1,3}, /* j */
  60     [0x25] = {1,4}, /* k */
  61     [0x26] = {1,5}, /* l */
  62     [0x32] = {2,0}, /* m */
  63     [0x31] = {2,1}, /* n */
  64     [0x18] = {2,2}, /* o */
  65     [0x19] = {2,3}, /* p */
  66     [0x10] = {2,4}, /* q */
  67     [0x13] = {2,5}, /* r */
  68     [0x1f] = {3,0}, /* s */
  69     [0x14] = {3,1}, /* t */
  70     [0x16] = {3,2}, /* u */
  71     [0x2f] = {3,3}, /* v */
  72     [0x11] = {3,4}, /* w */
  73     [0x2d] = {3,5}, /* x */
  74     [0x15] = {4,2}, /* y */
  75     [0x2c] = {4,3}, /* z */
  76     [0xc7] = {5,0}, /* Home */
  77     [0x2a] = {5,1}, /* shift */
  78     /*
  79      * There are two matrix positions which map to space,
  80      * but QEMU can only use one of them for the reverse
  81      * mapping, so simply use the second one.
  82      */
  83     /* [0x39] = {5,2}, space */
  84     [0x39] = {5,3}, /* space */
  85     /*
  86      * Matrix position {5,4} and other keys are missing here.
  87      * TODO: Compare with Linux code and test real hardware.
  88      */
  89     [0x1c] = {5,5}, /* enter (TODO: might be wrong) */
  90     [0xc8] = {6,0}, /* up */
  91     [0xd0] = {6,1}, /* down */
  92     [0xcb] = {6,2}, /* left */
  93     [0xcd] = {6,3}, /* right */
  94 };
  95
  96 enum mainstone_model_e { mainstone };
  97
  98 #define MAINSTONE_RAM   0x04000000
  99 #define MAINSTONE_ROM   0x00800000
 100 #define MAINSTONE_FLASH 0x02000000
 101
 102 static struct arm_boot_info mainstone_binfo = {
 103     .loader_start = PXA2XX_SDRAM_BASE,
 104     .ram_size = 0x04000000,
 105 };
 106
 107 static void mainstone_common_init(MemoryRegion *address_space_mem,
 108                                   MachineState *machine,
 109                                   enum mainstone_model_e model, int arm_id)
 110 {
 111     uint32_t sector_len = 256 * 1024;
 112     hwaddr mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 };
 113     PXA2xxState *mpu;
 114     DeviceState *mst_irq;
 115     DriveInfo *dinfo;
 116     int i;
 117     int be;
 118     MemoryRegion *rom = g_new(MemoryRegion, 1);
 119     const char *cpu_model = machine->cpu_model;
 120
 121     if (!cpu_model)
 122         cpu_model = "pxa270-c5";
 123
 124     /* Setup CPU & memory */
 125     mpu = pxa270_init(address_space_mem, mainstone_binfo.ram_size, cpu_model);
 126     memory_region_init_ram(rom, NULL, "mainstone.rom", MAINSTONE_ROM,
 127                            &error_abort);
 128     vmstate_register_ram_global(rom);
 129     memory_region_set_readonly(rom, true);
 130     memory_region_add_subregion(address_space_mem, 0, rom);
 131
 132 #ifdef TARGET_WORDS_BIGENDIAN
 133     be = 1;
 134 #else
 135     be = 0;
 136 #endif
 137     /* There are two 32MiB flash devices on the board */
 138     for (i = 0; i < 2; i ++) {
 139         dinfo = drive_get(IF_PFLASH, 0, i);
 140         if (!dinfo) {
 141             if (qtest_enabled()) {
 142                 break;
 143             }
 144             fprintf(stderr, "Two flash images must be given with the "
 145                     "'pflash' parameter\n");
 146             exit(1);
 147         }
 148
 149         if (!pflash_cfi01_register(mainstone_flash_base[i], NULL,
 150                                    i ? "mainstone.flash1" : "mainstone.flash0",
 151                                    MAINSTONE_FLASH,
 152                                    blk_by_legacy_dinfo(dinfo),
 153                                    sector_len, MAINSTONE_FLASH / sector_len,
 154                                    4, 0, 0, 0, 0, be)) {
 155             fprintf(stderr, "qemu: Error registering flash memory.\n");
 156             exit(1);
 157         }
 158     }
 159
 160     mst_irq = sysbus_create_simple("mainstone-fpga", MST_FPGA_PHYS,
 161                     qdev_get_gpio_in(mpu->gpio, 0));
 162
 163     /* setup keypad */
 164     pxa27x_register_keypad(mpu->kp, map, 0xe0);
 165
 166     /* MMC/SD host */
 167     pxa2xx_mmci_handlers(mpu->mmc, NULL, qdev_get_gpio_in(mst_irq, MMC_IRQ));
 168
 169     pxa2xx_pcmcia_set_irq_cb(mpu->pcmcia[0],
 170             qdev_get_gpio_in(mst_irq, S0_IRQ),
 171             qdev_get_gpio_in(mst_irq, S0_CD_IRQ));
 172     pxa2xx_pcmcia_set_irq_cb(mpu->pcmcia[1],
 173             qdev_get_gpio_in(mst_irq, S1_IRQ),
 174             qdev_get_gpio_in(mst_irq, S1_CD_IRQ));
 175
 176     smc91c111_init(&nd_table[0], MST_ETH_PHYS,
 177                     qdev_get_gpio_in(mst_irq, ETHERNET_IRQ));
 178
 179     mainstone_binfo.kernel_filename = machine->kernel_filename;
 180     mainstone_binfo.kernel_cmdline = machine->kernel_cmdline;
 181     mainstone_binfo.initrd_filename = machine->initrd_filename;
 182     mainstone_binfo.board_id = arm_id;
 183     arm_load_kernel(mpu->cpu, &mainstone_binfo);
 184 }
 185
 186 static void mainstone_init(MachineState *machine)
 187 {
 188     mainstone_common_init(get_system_memory(), machine, mainstone, 0x196);
 189 }
 190
 191 static QEMUMachine mainstone2_machine = {
 192     .name = "mainstone",
 193     .desc = "Mainstone II (PXA27x)",
 194     .init = mainstone_init,
 195 };
 196
 197 static void mainstone_machine_init(void)
 198 {
 199     qemu_register_machine(&mainstone2_machine);
 200 }
 201
 202 machine_init(mainstone_machine_init);