block: Allow wait_serialising_requests() at any point
[qemu/ar7.git] / block.c
blob96905856a1de7980a3be56fcfd5f4654b8e7bf4d
1 /*
2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "block/qapi.h"
36 #include "qmp-commands.h"
37 #include "qemu/timer.h"
39 #ifdef CONFIG_BSD
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
44 #ifndef __DragonFly__
45 #include <sys/disk.h>
46 #endif
47 #endif
49 #ifdef _WIN32
50 #include <windows.h>
51 #endif
53 struct BdrvDirtyBitmap {
54 HBitmap *bitmap;
55 QLIST_ENTRY(BdrvDirtyBitmap) list;
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63 BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66 BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68 int64_t sector_num, int nb_sectors,
69 QEMUIOVector *iov);
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71 int64_t sector_num, int nb_sectors,
72 QEMUIOVector *iov);
73 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
74 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
75 BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
77 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
78 BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
80 int64_t sector_num,
81 QEMUIOVector *qiov,
82 int nb_sectors,
83 BdrvRequestFlags flags,
84 BlockDriverCompletionFunc *cb,
85 void *opaque,
86 bool is_write);
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92 QTAILQ_HEAD_INITIALIZER(bdrv_states);
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98 QLIST_HEAD_INITIALIZER(bdrv_drivers);
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
103 #ifdef _WIN32
104 static int is_windows_drive_prefix(const char *filename)
106 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
108 filename[1] == ':');
111 int is_windows_drive(const char *filename)
113 if (is_windows_drive_prefix(filename) &&
114 filename[2] == '\0')
115 return 1;
116 if (strstart(filename, "\\\\.\\", NULL) ||
117 strstart(filename, "//./", NULL))
118 return 1;
119 return 0;
121 #endif
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
125 ThrottleConfig *cfg)
127 int i;
129 throttle_config(&bs->throttle_state, cfg);
131 for (i = 0; i < 2; i++) {
132 qemu_co_enter_next(&bs->throttled_reqs[i]);
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
139 bool drained = false;
140 bool enabled = bs->io_limits_enabled;
141 int i;
143 bs->io_limits_enabled = false;
145 for (i = 0; i < 2; i++) {
146 while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
147 drained = true;
151 bs->io_limits_enabled = enabled;
153 return drained;
156 void bdrv_io_limits_disable(BlockDriverState *bs)
158 bs->io_limits_enabled = false;
160 bdrv_start_throttled_reqs(bs);
162 throttle_destroy(&bs->throttle_state);
165 static void bdrv_throttle_read_timer_cb(void *opaque)
167 BlockDriverState *bs = opaque;
168 qemu_co_enter_next(&bs->throttled_reqs[0]);
171 static void bdrv_throttle_write_timer_cb(void *opaque)
173 BlockDriverState *bs = opaque;
174 qemu_co_enter_next(&bs->throttled_reqs[1]);
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
180 assert(!bs->io_limits_enabled);
181 throttle_init(&bs->throttle_state,
182 QEMU_CLOCK_VIRTUAL,
183 bdrv_throttle_read_timer_cb,
184 bdrv_throttle_write_timer_cb,
185 bs);
186 bs->io_limits_enabled = true;
189 /* This function makes an IO wait if needed
191 * @nb_sectors: the number of sectors of the IO
192 * @is_write: is the IO a write
194 static void bdrv_io_limits_intercept(BlockDriverState *bs,
195 int nb_sectors,
196 bool is_write)
198 /* does this io must wait */
199 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
201 /* if must wait or any request of this type throttled queue the IO */
202 if (must_wait ||
203 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
204 qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
207 /* the IO will be executed, do the accounting */
208 throttle_account(&bs->throttle_state,
209 is_write,
210 nb_sectors * BDRV_SECTOR_SIZE);
212 /* if the next request must wait -> do nothing */
213 if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
214 return;
217 /* else queue next request for execution */
218 qemu_co_queue_next(&bs->throttled_reqs[is_write]);
221 size_t bdrv_opt_mem_align(BlockDriverState *bs)
223 if (!bs || !bs->drv) {
224 /* 4k should be on the safe side */
225 return 4096;
228 return bs->bl.opt_mem_alignment;
231 /* check if the path starts with "<protocol>:" */
232 static int path_has_protocol(const char *path)
234 const char *p;
236 #ifdef _WIN32
237 if (is_windows_drive(path) ||
238 is_windows_drive_prefix(path)) {
239 return 0;
241 p = path + strcspn(path, ":/\\");
242 #else
243 p = path + strcspn(path, ":/");
244 #endif
246 return *p == ':';
249 int path_is_absolute(const char *path)
251 #ifdef _WIN32
252 /* specific case for names like: "\\.\d:" */
253 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
254 return 1;
256 return (*path == '/' || *path == '\\');
257 #else
258 return (*path == '/');
259 #endif
262 /* if filename is absolute, just copy it to dest. Otherwise, build a
263 path to it by considering it is relative to base_path. URL are
264 supported. */
265 void path_combine(char *dest, int dest_size,
266 const char *base_path,
267 const char *filename)
269 const char *p, *p1;
270 int len;
272 if (dest_size <= 0)
273 return;
274 if (path_is_absolute(filename)) {
275 pstrcpy(dest, dest_size, filename);
276 } else {
277 p = strchr(base_path, ':');
278 if (p)
279 p++;
280 else
281 p = base_path;
282 p1 = strrchr(base_path, '/');
283 #ifdef _WIN32
285 const char *p2;
286 p2 = strrchr(base_path, '\\');
287 if (!p1 || p2 > p1)
288 p1 = p2;
290 #endif
291 if (p1)
292 p1++;
293 else
294 p1 = base_path;
295 if (p1 > p)
296 p = p1;
297 len = p - base_path;
298 if (len > dest_size - 1)
299 len = dest_size - 1;
300 memcpy(dest, base_path, len);
301 dest[len] = '\0';
302 pstrcat(dest, dest_size, filename);
306 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
308 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
309 pstrcpy(dest, sz, bs->backing_file);
310 } else {
311 path_combine(dest, sz, bs->filename, bs->backing_file);
315 void bdrv_register(BlockDriver *bdrv)
317 /* Block drivers without coroutine functions need emulation */
318 if (!bdrv->bdrv_co_readv) {
319 bdrv->bdrv_co_readv = bdrv_co_readv_em;
320 bdrv->bdrv_co_writev = bdrv_co_writev_em;
322 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
323 * the block driver lacks aio we need to emulate that too.
325 if (!bdrv->bdrv_aio_readv) {
326 /* add AIO emulation layer */
327 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
328 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
332 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
335 /* create a new block device (by default it is empty) */
336 BlockDriverState *bdrv_new(const char *device_name)
338 BlockDriverState *bs;
340 bs = g_malloc0(sizeof(BlockDriverState));
341 QLIST_INIT(&bs->dirty_bitmaps);
342 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
343 if (device_name[0] != '\0') {
344 QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
346 bdrv_iostatus_disable(bs);
347 notifier_list_init(&bs->close_notifiers);
348 notifier_with_return_list_init(&bs->before_write_notifiers);
349 qemu_co_queue_init(&bs->throttled_reqs[0]);
350 qemu_co_queue_init(&bs->throttled_reqs[1]);
351 bs->refcnt = 1;
353 return bs;
356 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
358 notifier_list_add(&bs->close_notifiers, notify);
361 BlockDriver *bdrv_find_format(const char *format_name)
363 BlockDriver *drv1;
364 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
365 if (!strcmp(drv1->format_name, format_name)) {
366 return drv1;
369 return NULL;
372 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
374 static const char *whitelist_rw[] = {
375 CONFIG_BDRV_RW_WHITELIST
377 static const char *whitelist_ro[] = {
378 CONFIG_BDRV_RO_WHITELIST
380 const char **p;
382 if (!whitelist_rw[0] && !whitelist_ro[0]) {
383 return 1; /* no whitelist, anything goes */
386 for (p = whitelist_rw; *p; p++) {
387 if (!strcmp(drv->format_name, *p)) {
388 return 1;
391 if (read_only) {
392 for (p = whitelist_ro; *p; p++) {
393 if (!strcmp(drv->format_name, *p)) {
394 return 1;
398 return 0;
401 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
402 bool read_only)
404 BlockDriver *drv = bdrv_find_format(format_name);
405 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
408 typedef struct CreateCo {
409 BlockDriver *drv;
410 char *filename;
411 QEMUOptionParameter *options;
412 int ret;
413 Error *err;
414 } CreateCo;
416 static void coroutine_fn bdrv_create_co_entry(void *opaque)
418 Error *local_err = NULL;
419 int ret;
421 CreateCo *cco = opaque;
422 assert(cco->drv);
424 ret = cco->drv->bdrv_create(cco->filename, cco->options, &local_err);
425 if (error_is_set(&local_err)) {
426 error_propagate(&cco->err, local_err);
428 cco->ret = ret;
431 int bdrv_create(BlockDriver *drv, const char* filename,
432 QEMUOptionParameter *options, Error **errp)
434 int ret;
436 Coroutine *co;
437 CreateCo cco = {
438 .drv = drv,
439 .filename = g_strdup(filename),
440 .options = options,
441 .ret = NOT_DONE,
442 .err = NULL,
445 if (!drv->bdrv_create) {
446 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
447 ret = -ENOTSUP;
448 goto out;
451 if (qemu_in_coroutine()) {
452 /* Fast-path if already in coroutine context */
453 bdrv_create_co_entry(&cco);
454 } else {
455 co = qemu_coroutine_create(bdrv_create_co_entry);
456 qemu_coroutine_enter(co, &cco);
457 while (cco.ret == NOT_DONE) {
458 qemu_aio_wait();
462 ret = cco.ret;
463 if (ret < 0) {
464 if (error_is_set(&cco.err)) {
465 error_propagate(errp, cco.err);
466 } else {
467 error_setg_errno(errp, -ret, "Could not create image");
471 out:
472 g_free(cco.filename);
473 return ret;
476 int bdrv_create_file(const char* filename, QEMUOptionParameter *options,
477 Error **errp)
479 BlockDriver *drv;
480 Error *local_err = NULL;
481 int ret;
483 drv = bdrv_find_protocol(filename, true);
484 if (drv == NULL) {
485 error_setg(errp, "Could not find protocol for file '%s'", filename);
486 return -ENOENT;
489 ret = bdrv_create(drv, filename, options, &local_err);
490 if (error_is_set(&local_err)) {
491 error_propagate(errp, local_err);
493 return ret;
496 int bdrv_refresh_limits(BlockDriverState *bs)
498 BlockDriver *drv = bs->drv;
500 memset(&bs->bl, 0, sizeof(bs->bl));
502 if (!drv) {
503 return 0;
506 /* Take some limits from the children as a default */
507 if (bs->file) {
508 bdrv_refresh_limits(bs->file);
509 bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
510 bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
511 } else {
512 bs->bl.opt_mem_alignment = 512;
515 if (bs->backing_hd) {
516 bdrv_refresh_limits(bs->backing_hd);
517 bs->bl.opt_transfer_length =
518 MAX(bs->bl.opt_transfer_length,
519 bs->backing_hd->bl.opt_transfer_length);
520 bs->bl.opt_mem_alignment =
521 MAX(bs->bl.opt_mem_alignment,
522 bs->backing_hd->bl.opt_mem_alignment);
525 /* Then let the driver override it */
526 if (drv->bdrv_refresh_limits) {
527 return drv->bdrv_refresh_limits(bs);
530 return 0;
534 * Create a uniquely-named empty temporary file.
535 * Return 0 upon success, otherwise a negative errno value.
537 int get_tmp_filename(char *filename, int size)
539 #ifdef _WIN32
540 char temp_dir[MAX_PATH];
541 /* GetTempFileName requires that its output buffer (4th param)
542 have length MAX_PATH or greater. */
543 assert(size >= MAX_PATH);
544 return (GetTempPath(MAX_PATH, temp_dir)
545 && GetTempFileName(temp_dir, "qem", 0, filename)
546 ? 0 : -GetLastError());
547 #else
548 int fd;
549 const char *tmpdir;
550 tmpdir = getenv("TMPDIR");
551 if (!tmpdir)
552 tmpdir = "/tmp";
553 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
554 return -EOVERFLOW;
556 fd = mkstemp(filename);
557 if (fd < 0) {
558 return -errno;
560 if (close(fd) != 0) {
561 unlink(filename);
562 return -errno;
564 return 0;
565 #endif
569 * Detect host devices. By convention, /dev/cdrom[N] is always
570 * recognized as a host CDROM.
572 static BlockDriver *find_hdev_driver(const char *filename)
574 int score_max = 0, score;
575 BlockDriver *drv = NULL, *d;
577 QLIST_FOREACH(d, &bdrv_drivers, list) {
578 if (d->bdrv_probe_device) {
579 score = d->bdrv_probe_device(filename);
580 if (score > score_max) {
581 score_max = score;
582 drv = d;
587 return drv;
590 BlockDriver *bdrv_find_protocol(const char *filename,
591 bool allow_protocol_prefix)
593 BlockDriver *drv1;
594 char protocol[128];
595 int len;
596 const char *p;
598 /* TODO Drivers without bdrv_file_open must be specified explicitly */
601 * XXX(hch): we really should not let host device detection
602 * override an explicit protocol specification, but moving this
603 * later breaks access to device names with colons in them.
604 * Thanks to the brain-dead persistent naming schemes on udev-
605 * based Linux systems those actually are quite common.
607 drv1 = find_hdev_driver(filename);
608 if (drv1) {
609 return drv1;
612 if (!path_has_protocol(filename) || !allow_protocol_prefix) {
613 return bdrv_find_format("file");
616 p = strchr(filename, ':');
617 assert(p != NULL);
618 len = p - filename;
619 if (len > sizeof(protocol) - 1)
620 len = sizeof(protocol) - 1;
621 memcpy(protocol, filename, len);
622 protocol[len] = '\0';
623 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
624 if (drv1->protocol_name &&
625 !strcmp(drv1->protocol_name, protocol)) {
626 return drv1;
629 return NULL;
632 static int find_image_format(BlockDriverState *bs, const char *filename,
633 BlockDriver **pdrv, Error **errp)
635 int score, score_max;
636 BlockDriver *drv1, *drv;
637 uint8_t buf[2048];
638 int ret = 0;
640 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
641 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
642 drv = bdrv_find_format("raw");
643 if (!drv) {
644 error_setg(errp, "Could not find raw image format");
645 ret = -ENOENT;
647 *pdrv = drv;
648 return ret;
651 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
652 if (ret < 0) {
653 error_setg_errno(errp, -ret, "Could not read image for determining its "
654 "format");
655 *pdrv = NULL;
656 return ret;
659 score_max = 0;
660 drv = NULL;
661 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
662 if (drv1->bdrv_probe) {
663 score = drv1->bdrv_probe(buf, ret, filename);
664 if (score > score_max) {
665 score_max = score;
666 drv = drv1;
670 if (!drv) {
671 error_setg(errp, "Could not determine image format: No compatible "
672 "driver found");
673 ret = -ENOENT;
675 *pdrv = drv;
676 return ret;
680 * Set the current 'total_sectors' value
682 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
684 BlockDriver *drv = bs->drv;
686 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
687 if (bs->sg)
688 return 0;
690 /* query actual device if possible, otherwise just trust the hint */
691 if (drv->bdrv_getlength) {
692 int64_t length = drv->bdrv_getlength(bs);
693 if (length < 0) {
694 return length;
696 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
699 bs->total_sectors = hint;
700 return 0;
704 * Set open flags for a given discard mode
706 * Return 0 on success, -1 if the discard mode was invalid.
708 int bdrv_parse_discard_flags(const char *mode, int *flags)
710 *flags &= ~BDRV_O_UNMAP;
712 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
713 /* do nothing */
714 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
715 *flags |= BDRV_O_UNMAP;
716 } else {
717 return -1;
720 return 0;
724 * Set open flags for a given cache mode
726 * Return 0 on success, -1 if the cache mode was invalid.
728 int bdrv_parse_cache_flags(const char *mode, int *flags)
730 *flags &= ~BDRV_O_CACHE_MASK;
732 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
733 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
734 } else if (!strcmp(mode, "directsync")) {
735 *flags |= BDRV_O_NOCACHE;
736 } else if (!strcmp(mode, "writeback")) {
737 *flags |= BDRV_O_CACHE_WB;
738 } else if (!strcmp(mode, "unsafe")) {
739 *flags |= BDRV_O_CACHE_WB;
740 *flags |= BDRV_O_NO_FLUSH;
741 } else if (!strcmp(mode, "writethrough")) {
742 /* this is the default */
743 } else {
744 return -1;
747 return 0;
751 * The copy-on-read flag is actually a reference count so multiple users may
752 * use the feature without worrying about clobbering its previous state.
753 * Copy-on-read stays enabled until all users have called to disable it.
755 void bdrv_enable_copy_on_read(BlockDriverState *bs)
757 bs->copy_on_read++;
760 void bdrv_disable_copy_on_read(BlockDriverState *bs)
762 assert(bs->copy_on_read > 0);
763 bs->copy_on_read--;
766 static int bdrv_open_flags(BlockDriverState *bs, int flags)
768 int open_flags = flags | BDRV_O_CACHE_WB;
771 * Clear flags that are internal to the block layer before opening the
772 * image.
774 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
777 * Snapshots should be writable.
779 if (bs->is_temporary) {
780 open_flags |= BDRV_O_RDWR;
783 return open_flags;
786 static int bdrv_assign_node_name(BlockDriverState *bs,
787 const char *node_name,
788 Error **errp)
790 if (!node_name) {
791 return 0;
794 /* empty string node name is invalid */
795 if (node_name[0] == '\0') {
796 error_setg(errp, "Empty node name");
797 return -EINVAL;
800 /* takes care of avoiding duplicates node names */
801 if (bdrv_find_node(node_name)) {
802 error_setg(errp, "Duplicate node name");
803 return -EINVAL;
806 /* copy node name into the bs and insert it into the graph list */
807 pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
808 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
810 return 0;
814 * Common part for opening disk images and files
816 * Removes all processed options from *options.
818 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
819 QDict *options, int flags, BlockDriver *drv, Error **errp)
821 int ret, open_flags;
822 const char *filename;
823 const char *node_name = NULL;
824 Error *local_err = NULL;
826 assert(drv != NULL);
827 assert(bs->file == NULL);
828 assert(options != NULL && bs->options != options);
830 if (file != NULL) {
831 filename = file->filename;
832 } else {
833 filename = qdict_get_try_str(options, "filename");
836 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
838 node_name = qdict_get_try_str(options, "node-name");
839 ret = bdrv_assign_node_name(bs, node_name, errp);
840 if (ret < 0) {
841 return ret;
843 qdict_del(options, "node-name");
845 /* bdrv_open() with directly using a protocol as drv. This layer is already
846 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
847 * and return immediately. */
848 if (file != NULL && drv->bdrv_file_open) {
849 bdrv_swap(file, bs);
850 return 0;
853 bs->open_flags = flags;
854 bs->guest_block_size = 512;
855 bs->request_alignment = 512;
856 bs->zero_beyond_eof = true;
857 open_flags = bdrv_open_flags(bs, flags);
858 bs->read_only = !(open_flags & BDRV_O_RDWR);
860 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
861 error_setg(errp,
862 !bs->read_only && bdrv_is_whitelisted(drv, true)
863 ? "Driver '%s' can only be used for read-only devices"
864 : "Driver '%s' is not whitelisted",
865 drv->format_name);
866 return -ENOTSUP;
869 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
870 if (flags & BDRV_O_COPY_ON_READ) {
871 if (!bs->read_only) {
872 bdrv_enable_copy_on_read(bs);
873 } else {
874 error_setg(errp, "Can't use copy-on-read on read-only device");
875 return -EINVAL;
879 if (filename != NULL) {
880 pstrcpy(bs->filename, sizeof(bs->filename), filename);
881 } else {
882 bs->filename[0] = '\0';
885 bs->drv = drv;
886 bs->opaque = g_malloc0(drv->instance_size);
888 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
890 /* Open the image, either directly or using a protocol */
891 if (drv->bdrv_file_open) {
892 assert(file == NULL);
893 assert(!drv->bdrv_needs_filename || filename != NULL);
894 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
895 } else {
896 if (file == NULL) {
897 error_setg(errp, "Can't use '%s' as a block driver for the "
898 "protocol level", drv->format_name);
899 ret = -EINVAL;
900 goto free_and_fail;
902 bs->file = file;
903 ret = drv->bdrv_open(bs, options, open_flags, &local_err);
906 if (ret < 0) {
907 if (error_is_set(&local_err)) {
908 error_propagate(errp, local_err);
909 } else if (bs->filename[0]) {
910 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
911 } else {
912 error_setg_errno(errp, -ret, "Could not open image");
914 goto free_and_fail;
917 ret = refresh_total_sectors(bs, bs->total_sectors);
918 if (ret < 0) {
919 error_setg_errno(errp, -ret, "Could not refresh total sector count");
920 goto free_and_fail;
923 bdrv_refresh_limits(bs);
924 assert(bdrv_opt_mem_align(bs) != 0);
925 assert(bs->request_alignment != 0);
927 #ifndef _WIN32
928 if (bs->is_temporary) {
929 assert(bs->filename[0] != '\0');
930 unlink(bs->filename);
932 #endif
933 return 0;
935 free_and_fail:
936 bs->file = NULL;
937 g_free(bs->opaque);
938 bs->opaque = NULL;
939 bs->drv = NULL;
940 return ret;
944 * Opens a file using a protocol (file, host_device, nbd, ...)
946 * options is a QDict of options to pass to the block drivers, or NULL for an
947 * empty set of options. The reference to the QDict belongs to the block layer
948 * after the call (even on failure), so if the caller intends to reuse the
949 * dictionary, it needs to use QINCREF() before calling bdrv_file_open.
951 int bdrv_file_open(BlockDriverState **pbs, const char *filename,
952 const char *reference, QDict *options, int flags,
953 Error **errp)
955 BlockDriverState *bs = NULL;
956 BlockDriver *drv;
957 const char *drvname;
958 bool allow_protocol_prefix = false;
959 Error *local_err = NULL;
960 int ret;
962 /* NULL means an empty set of options */
963 if (options == NULL) {
964 options = qdict_new();
967 if (reference) {
968 if (filename || qdict_size(options)) {
969 error_setg(errp, "Cannot reference an existing block device with "
970 "additional options or a new filename");
971 return -EINVAL;
973 QDECREF(options);
975 bs = bdrv_find(reference);
976 if (!bs) {
977 error_setg(errp, "Cannot find block device '%s'", reference);
978 return -ENODEV;
980 bdrv_ref(bs);
981 *pbs = bs;
982 return 0;
985 bs = bdrv_new("");
986 bs->options = options;
987 options = qdict_clone_shallow(options);
989 /* Fetch the file name from the options QDict if necessary */
990 if (!filename) {
991 filename = qdict_get_try_str(options, "filename");
992 } else if (filename && !qdict_haskey(options, "filename")) {
993 qdict_put(options, "filename", qstring_from_str(filename));
994 allow_protocol_prefix = true;
995 } else {
996 error_setg(errp, "Can't specify 'file' and 'filename' options at the "
997 "same time");
998 ret = -EINVAL;
999 goto fail;
1002 /* Find the right block driver */
1003 drvname = qdict_get_try_str(options, "driver");
1004 if (drvname) {
1005 drv = bdrv_find_format(drvname);
1006 if (!drv) {
1007 error_setg(errp, "Unknown driver '%s'", drvname);
1009 qdict_del(options, "driver");
1010 } else if (filename) {
1011 drv = bdrv_find_protocol(filename, allow_protocol_prefix);
1012 if (!drv) {
1013 error_setg(errp, "Unknown protocol");
1015 } else {
1016 error_setg(errp, "Must specify either driver or file");
1017 drv = NULL;
1020 if (!drv) {
1021 /* errp has been set already */
1022 ret = -ENOENT;
1023 goto fail;
1026 /* Parse the filename and open it */
1027 if (drv->bdrv_parse_filename && filename) {
1028 drv->bdrv_parse_filename(filename, options, &local_err);
1029 if (error_is_set(&local_err)) {
1030 error_propagate(errp, local_err);
1031 ret = -EINVAL;
1032 goto fail;
1034 qdict_del(options, "filename");
1035 } else if (drv->bdrv_needs_filename && !filename) {
1036 error_setg(errp, "The '%s' block driver requires a file name",
1037 drv->format_name);
1038 ret = -EINVAL;
1039 goto fail;
1042 if (!drv->bdrv_file_open) {
1043 ret = bdrv_open(bs, filename, options, flags, drv, &local_err);
1044 options = NULL;
1045 } else {
1046 ret = bdrv_open_common(bs, NULL, options, flags, drv, &local_err);
1048 if (ret < 0) {
1049 error_propagate(errp, local_err);
1050 goto fail;
1053 /* Check if any unknown options were used */
1054 if (options && (qdict_size(options) != 0)) {
1055 const QDictEntry *entry = qdict_first(options);
1056 error_setg(errp, "Block protocol '%s' doesn't support the option '%s'",
1057 drv->format_name, entry->key);
1058 ret = -EINVAL;
1059 goto fail;
1061 QDECREF(options);
1063 bs->growable = 1;
1064 *pbs = bs;
1065 return 0;
1067 fail:
1068 QDECREF(options);
1069 if (!bs->drv) {
1070 QDECREF(bs->options);
1072 bdrv_unref(bs);
1073 return ret;
1077 * Opens the backing file for a BlockDriverState if not yet open
1079 * options is a QDict of options to pass to the block drivers, or NULL for an
1080 * empty set of options. The reference to the QDict is transferred to this
1081 * function (even on failure), so if the caller intends to reuse the dictionary,
1082 * it needs to use QINCREF() before calling bdrv_file_open.
1084 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1086 char backing_filename[PATH_MAX];
1087 int back_flags, ret;
1088 BlockDriver *back_drv = NULL;
1089 Error *local_err = NULL;
1091 if (bs->backing_hd != NULL) {
1092 QDECREF(options);
1093 return 0;
1096 /* NULL means an empty set of options */
1097 if (options == NULL) {
1098 options = qdict_new();
1101 bs->open_flags &= ~BDRV_O_NO_BACKING;
1102 if (qdict_haskey(options, "file.filename")) {
1103 backing_filename[0] = '\0';
1104 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1105 QDECREF(options);
1106 return 0;
1107 } else {
1108 bdrv_get_full_backing_filename(bs, backing_filename,
1109 sizeof(backing_filename));
1112 bs->backing_hd = bdrv_new("");
1114 if (bs->backing_format[0] != '\0') {
1115 back_drv = bdrv_find_format(bs->backing_format);
1118 /* backing files always opened read-only */
1119 back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT |
1120 BDRV_O_COPY_ON_READ);
1122 ret = bdrv_open(bs->backing_hd,
1123 *backing_filename ? backing_filename : NULL, options,
1124 back_flags, back_drv, &local_err);
1125 if (ret < 0) {
1126 bdrv_unref(bs->backing_hd);
1127 bs->backing_hd = NULL;
1128 bs->open_flags |= BDRV_O_NO_BACKING;
1129 error_setg(errp, "Could not open backing file: %s",
1130 error_get_pretty(local_err));
1131 error_free(local_err);
1132 return ret;
1135 if (bs->backing_hd->file) {
1136 pstrcpy(bs->backing_file, sizeof(bs->backing_file),
1137 bs->backing_hd->file->filename);
1140 /* Recalculate the BlockLimits with the backing file */
1141 bdrv_refresh_limits(bs);
1143 return 0;
1147 * Opens a disk image whose options are given as BlockdevRef in another block
1148 * device's options.
1150 * If force_raw is true, bdrv_file_open() will be used, thereby preventing any
1151 * image format auto-detection. If it is false and a filename is given,
1152 * bdrv_open() will be used for auto-detection.
1154 * If allow_none is true, no image will be opened if filename is false and no
1155 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1157 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1158 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1159 * itself, all options starting with "${bdref_key}." are considered part of the
1160 * BlockdevRef.
1162 * The BlockdevRef will be removed from the options QDict.
1164 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1165 QDict *options, const char *bdref_key, int flags,
1166 bool force_raw, bool allow_none, Error **errp)
1168 QDict *image_options;
1169 int ret;
1170 char *bdref_key_dot;
1171 const char *reference;
1173 bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1174 qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1175 g_free(bdref_key_dot);
1177 reference = qdict_get_try_str(options, bdref_key);
1178 if (!filename && !reference && !qdict_size(image_options)) {
1179 if (allow_none) {
1180 ret = 0;
1181 } else {
1182 error_setg(errp, "A block device must be specified for \"%s\"",
1183 bdref_key);
1184 ret = -EINVAL;
1186 goto done;
1189 if (filename && !force_raw) {
1190 /* If a filename is given and the block driver should be detected
1191 automatically (instead of using none), use bdrv_open() in order to do
1192 that auto-detection. */
1193 BlockDriverState *bs;
1195 if (reference) {
1196 error_setg(errp, "Cannot reference an existing block device while "
1197 "giving a filename");
1198 ret = -EINVAL;
1199 goto done;
1202 bs = bdrv_new("");
1203 ret = bdrv_open(bs, filename, image_options, flags, NULL, errp);
1204 if (ret < 0) {
1205 bdrv_unref(bs);
1206 } else {
1207 *pbs = bs;
1209 } else {
1210 ret = bdrv_file_open(pbs, filename, reference, image_options, flags,
1211 errp);
1214 done:
1215 qdict_del(options, bdref_key);
1216 return ret;
1220 * Opens a disk image (raw, qcow2, vmdk, ...)
1222 * options is a QDict of options to pass to the block drivers, or NULL for an
1223 * empty set of options. The reference to the QDict belongs to the block layer
1224 * after the call (even on failure), so if the caller intends to reuse the
1225 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1227 int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
1228 int flags, BlockDriver *drv, Error **errp)
1230 int ret;
1231 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1232 char tmp_filename[PATH_MAX + 1];
1233 BlockDriverState *file = NULL;
1234 const char *drvname;
1235 Error *local_err = NULL;
1237 /* NULL means an empty set of options */
1238 if (options == NULL) {
1239 options = qdict_new();
1242 bs->options = options;
1243 options = qdict_clone_shallow(options);
1245 /* For snapshot=on, create a temporary qcow2 overlay */
1246 if (flags & BDRV_O_SNAPSHOT) {
1247 BlockDriverState *bs1;
1248 int64_t total_size;
1249 BlockDriver *bdrv_qcow2;
1250 QEMUOptionParameter *create_options;
1251 QDict *snapshot_options;
1253 /* if snapshot, we create a temporary backing file and open it
1254 instead of opening 'filename' directly */
1256 /* Get the required size from the image */
1257 bs1 = bdrv_new("");
1258 QINCREF(options);
1259 ret = bdrv_open(bs1, filename, options, BDRV_O_NO_BACKING,
1260 drv, &local_err);
1261 if (ret < 0) {
1262 bdrv_unref(bs1);
1263 goto fail;
1265 total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK;
1267 bdrv_unref(bs1);
1269 /* Create the temporary image */
1270 ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
1271 if (ret < 0) {
1272 error_setg_errno(errp, -ret, "Could not get temporary filename");
1273 goto fail;
1276 bdrv_qcow2 = bdrv_find_format("qcow2");
1277 create_options = parse_option_parameters("", bdrv_qcow2->create_options,
1278 NULL);
1280 set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
1282 ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
1283 free_option_parameters(create_options);
1284 if (ret < 0) {
1285 error_setg_errno(errp, -ret, "Could not create temporary overlay "
1286 "'%s': %s", tmp_filename,
1287 error_get_pretty(local_err));
1288 error_free(local_err);
1289 local_err = NULL;
1290 goto fail;
1293 /* Prepare a new options QDict for the temporary file, where user
1294 * options refer to the backing file */
1295 if (filename) {
1296 qdict_put(options, "file.filename", qstring_from_str(filename));
1298 if (drv) {
1299 qdict_put(options, "driver", qstring_from_str(drv->format_name));
1302 snapshot_options = qdict_new();
1303 qdict_put(snapshot_options, "backing", options);
1304 qdict_flatten(snapshot_options);
1306 bs->options = snapshot_options;
1307 options = qdict_clone_shallow(bs->options);
1309 filename = tmp_filename;
1310 drv = bdrv_qcow2;
1311 bs->is_temporary = 1;
1314 /* Open image file without format layer */
1315 if (flags & BDRV_O_RDWR) {
1316 flags |= BDRV_O_ALLOW_RDWR;
1319 ret = bdrv_open_image(&file, filename, options, "file",
1320 bdrv_open_flags(bs, flags | BDRV_O_UNMAP), true, true,
1321 &local_err);
1322 if (ret < 0) {
1323 goto fail;
1326 /* Find the right image format driver */
1327 drvname = qdict_get_try_str(options, "driver");
1328 if (drvname) {
1329 drv = bdrv_find_format(drvname);
1330 qdict_del(options, "driver");
1331 if (!drv) {
1332 error_setg(errp, "Invalid driver: '%s'", drvname);
1333 ret = -EINVAL;
1334 goto unlink_and_fail;
1338 if (!drv) {
1339 if (file) {
1340 ret = find_image_format(file, filename, &drv, &local_err);
1341 } else {
1342 error_setg(errp, "Must specify either driver or file");
1343 ret = -EINVAL;
1344 goto unlink_and_fail;
1348 if (!drv) {
1349 goto unlink_and_fail;
1352 /* Open the image */
1353 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1354 if (ret < 0) {
1355 goto unlink_and_fail;
1358 if (file && (bs->file != file)) {
1359 bdrv_unref(file);
1360 file = NULL;
1363 /* If there is a backing file, use it */
1364 if ((flags & BDRV_O_NO_BACKING) == 0) {
1365 QDict *backing_options;
1367 qdict_extract_subqdict(options, &backing_options, "backing.");
1368 ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1369 if (ret < 0) {
1370 goto close_and_fail;
1374 /* Check if any unknown options were used */
1375 if (qdict_size(options) != 0) {
1376 const QDictEntry *entry = qdict_first(options);
1377 error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1378 "support the option '%s'", drv->format_name, bs->device_name,
1379 entry->key);
1381 ret = -EINVAL;
1382 goto close_and_fail;
1384 QDECREF(options);
1386 if (!bdrv_key_required(bs)) {
1387 bdrv_dev_change_media_cb(bs, true);
1390 return 0;
1392 unlink_and_fail:
1393 if (file != NULL) {
1394 bdrv_unref(file);
1396 if (bs->is_temporary) {
1397 unlink(filename);
1399 fail:
1400 QDECREF(bs->options);
1401 QDECREF(options);
1402 bs->options = NULL;
1403 if (error_is_set(&local_err)) {
1404 error_propagate(errp, local_err);
1406 return ret;
1408 close_and_fail:
1409 bdrv_close(bs);
1410 QDECREF(options);
1411 if (error_is_set(&local_err)) {
1412 error_propagate(errp, local_err);
1414 return ret;
1417 typedef struct BlockReopenQueueEntry {
1418 bool prepared;
1419 BDRVReopenState state;
1420 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1421 } BlockReopenQueueEntry;
1424 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1425 * reopen of multiple devices.
1427 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1428 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1429 * be created and initialized. This newly created BlockReopenQueue should be
1430 * passed back in for subsequent calls that are intended to be of the same
1431 * atomic 'set'.
1433 * bs is the BlockDriverState to add to the reopen queue.
1435 * flags contains the open flags for the associated bs
1437 * returns a pointer to bs_queue, which is either the newly allocated
1438 * bs_queue, or the existing bs_queue being used.
1441 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1442 BlockDriverState *bs, int flags)
1444 assert(bs != NULL);
1446 BlockReopenQueueEntry *bs_entry;
1447 if (bs_queue == NULL) {
1448 bs_queue = g_new0(BlockReopenQueue, 1);
1449 QSIMPLEQ_INIT(bs_queue);
1452 if (bs->file) {
1453 bdrv_reopen_queue(bs_queue, bs->file, flags);
1456 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1457 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1459 bs_entry->state.bs = bs;
1460 bs_entry->state.flags = flags;
1462 return bs_queue;
1466 * Reopen multiple BlockDriverStates atomically & transactionally.
1468 * The queue passed in (bs_queue) must have been built up previous
1469 * via bdrv_reopen_queue().
1471 * Reopens all BDS specified in the queue, with the appropriate
1472 * flags. All devices are prepared for reopen, and failure of any
1473 * device will cause all device changes to be abandonded, and intermediate
1474 * data cleaned up.
1476 * If all devices prepare successfully, then the changes are committed
1477 * to all devices.
1480 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1482 int ret = -1;
1483 BlockReopenQueueEntry *bs_entry, *next;
1484 Error *local_err = NULL;
1486 assert(bs_queue != NULL);
1488 bdrv_drain_all();
1490 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1491 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1492 error_propagate(errp, local_err);
1493 goto cleanup;
1495 bs_entry->prepared = true;
1498 /* If we reach this point, we have success and just need to apply the
1499 * changes
1501 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1502 bdrv_reopen_commit(&bs_entry->state);
1505 ret = 0;
1507 cleanup:
1508 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1509 if (ret && bs_entry->prepared) {
1510 bdrv_reopen_abort(&bs_entry->state);
1512 g_free(bs_entry);
1514 g_free(bs_queue);
1515 return ret;
1519 /* Reopen a single BlockDriverState with the specified flags. */
1520 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1522 int ret = -1;
1523 Error *local_err = NULL;
1524 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1526 ret = bdrv_reopen_multiple(queue, &local_err);
1527 if (local_err != NULL) {
1528 error_propagate(errp, local_err);
1530 return ret;
1535 * Prepares a BlockDriverState for reopen. All changes are staged in the
1536 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1537 * the block driver layer .bdrv_reopen_prepare()
1539 * bs is the BlockDriverState to reopen
1540 * flags are the new open flags
1541 * queue is the reopen queue
1543 * Returns 0 on success, non-zero on error. On error errp will be set
1544 * as well.
1546 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1547 * It is the responsibility of the caller to then call the abort() or
1548 * commit() for any other BDS that have been left in a prepare() state
1551 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1552 Error **errp)
1554 int ret = -1;
1555 Error *local_err = NULL;
1556 BlockDriver *drv;
1558 assert(reopen_state != NULL);
1559 assert(reopen_state->bs->drv != NULL);
1560 drv = reopen_state->bs->drv;
1562 /* if we are to stay read-only, do not allow permission change
1563 * to r/w */
1564 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1565 reopen_state->flags & BDRV_O_RDWR) {
1566 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1567 reopen_state->bs->device_name);
1568 goto error;
1572 ret = bdrv_flush(reopen_state->bs);
1573 if (ret) {
1574 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1575 strerror(-ret));
1576 goto error;
1579 if (drv->bdrv_reopen_prepare) {
1580 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1581 if (ret) {
1582 if (local_err != NULL) {
1583 error_propagate(errp, local_err);
1584 } else {
1585 error_setg(errp, "failed while preparing to reopen image '%s'",
1586 reopen_state->bs->filename);
1588 goto error;
1590 } else {
1591 /* It is currently mandatory to have a bdrv_reopen_prepare()
1592 * handler for each supported drv. */
1593 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1594 drv->format_name, reopen_state->bs->device_name,
1595 "reopening of file");
1596 ret = -1;
1597 goto error;
1600 ret = 0;
1602 error:
1603 return ret;
1607 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1608 * makes them final by swapping the staging BlockDriverState contents into
1609 * the active BlockDriverState contents.
1611 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1613 BlockDriver *drv;
1615 assert(reopen_state != NULL);
1616 drv = reopen_state->bs->drv;
1617 assert(drv != NULL);
1619 /* If there are any driver level actions to take */
1620 if (drv->bdrv_reopen_commit) {
1621 drv->bdrv_reopen_commit(reopen_state);
1624 /* set BDS specific flags now */
1625 reopen_state->bs->open_flags = reopen_state->flags;
1626 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1627 BDRV_O_CACHE_WB);
1628 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1630 bdrv_refresh_limits(reopen_state->bs);
1634 * Abort the reopen, and delete and free the staged changes in
1635 * reopen_state
1637 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1639 BlockDriver *drv;
1641 assert(reopen_state != NULL);
1642 drv = reopen_state->bs->drv;
1643 assert(drv != NULL);
1645 if (drv->bdrv_reopen_abort) {
1646 drv->bdrv_reopen_abort(reopen_state);
1651 void bdrv_close(BlockDriverState *bs)
1653 if (bs->job) {
1654 block_job_cancel_sync(bs->job);
1656 bdrv_drain_all(); /* complete I/O */
1657 bdrv_flush(bs);
1658 bdrv_drain_all(); /* in case flush left pending I/O */
1659 notifier_list_notify(&bs->close_notifiers, bs);
1661 if (bs->drv) {
1662 if (bs->backing_hd) {
1663 bdrv_unref(bs->backing_hd);
1664 bs->backing_hd = NULL;
1666 bs->drv->bdrv_close(bs);
1667 g_free(bs->opaque);
1668 #ifdef _WIN32
1669 if (bs->is_temporary) {
1670 unlink(bs->filename);
1672 #endif
1673 bs->opaque = NULL;
1674 bs->drv = NULL;
1675 bs->copy_on_read = 0;
1676 bs->backing_file[0] = '\0';
1677 bs->backing_format[0] = '\0';
1678 bs->total_sectors = 0;
1679 bs->encrypted = 0;
1680 bs->valid_key = 0;
1681 bs->sg = 0;
1682 bs->growable = 0;
1683 bs->zero_beyond_eof = false;
1684 QDECREF(bs->options);
1685 bs->options = NULL;
1687 if (bs->file != NULL) {
1688 bdrv_unref(bs->file);
1689 bs->file = NULL;
1693 bdrv_dev_change_media_cb(bs, false);
1695 /*throttling disk I/O limits*/
1696 if (bs->io_limits_enabled) {
1697 bdrv_io_limits_disable(bs);
1701 void bdrv_close_all(void)
1703 BlockDriverState *bs;
1705 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1706 bdrv_close(bs);
1710 /* Check if any requests are in-flight (including throttled requests) */
1711 static bool bdrv_requests_pending(BlockDriverState *bs)
1713 if (!QLIST_EMPTY(&bs->tracked_requests)) {
1714 return true;
1716 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1717 return true;
1719 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1720 return true;
1722 if (bs->file && bdrv_requests_pending(bs->file)) {
1723 return true;
1725 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1726 return true;
1728 return false;
1731 static bool bdrv_requests_pending_all(void)
1733 BlockDriverState *bs;
1734 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1735 if (bdrv_requests_pending(bs)) {
1736 return true;
1739 return false;
1743 * Wait for pending requests to complete across all BlockDriverStates
1745 * This function does not flush data to disk, use bdrv_flush_all() for that
1746 * after calling this function.
1748 * Note that completion of an asynchronous I/O operation can trigger any
1749 * number of other I/O operations on other devices---for example a coroutine
1750 * can be arbitrarily complex and a constant flow of I/O can come until the
1751 * coroutine is complete. Because of this, it is not possible to have a
1752 * function to drain a single device's I/O queue.
1754 void bdrv_drain_all(void)
1756 /* Always run first iteration so any pending completion BHs run */
1757 bool busy = true;
1758 BlockDriverState *bs;
1760 while (busy) {
1761 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1762 bdrv_start_throttled_reqs(bs);
1765 busy = bdrv_requests_pending_all();
1766 busy |= aio_poll(qemu_get_aio_context(), busy);
1770 /* make a BlockDriverState anonymous by removing from bdrv_state and
1771 * graph_bdrv_state list.
1772 Also, NULL terminate the device_name to prevent double remove */
1773 void bdrv_make_anon(BlockDriverState *bs)
1775 if (bs->device_name[0] != '\0') {
1776 QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1778 bs->device_name[0] = '\0';
1779 if (bs->node_name[0] != '\0') {
1780 QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1782 bs->node_name[0] = '\0';
1785 static void bdrv_rebind(BlockDriverState *bs)
1787 if (bs->drv && bs->drv->bdrv_rebind) {
1788 bs->drv->bdrv_rebind(bs);
1792 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1793 BlockDriverState *bs_src)
1795 /* move some fields that need to stay attached to the device */
1796 bs_dest->open_flags = bs_src->open_flags;
1798 /* dev info */
1799 bs_dest->dev_ops = bs_src->dev_ops;
1800 bs_dest->dev_opaque = bs_src->dev_opaque;
1801 bs_dest->dev = bs_src->dev;
1802 bs_dest->guest_block_size = bs_src->guest_block_size;
1803 bs_dest->copy_on_read = bs_src->copy_on_read;
1805 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1807 /* i/o throttled req */
1808 memcpy(&bs_dest->throttle_state,
1809 &bs_src->throttle_state,
1810 sizeof(ThrottleState));
1811 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0];
1812 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1];
1813 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1815 /* r/w error */
1816 bs_dest->on_read_error = bs_src->on_read_error;
1817 bs_dest->on_write_error = bs_src->on_write_error;
1819 /* i/o status */
1820 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1821 bs_dest->iostatus = bs_src->iostatus;
1823 /* dirty bitmap */
1824 bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps;
1826 /* reference count */
1827 bs_dest->refcnt = bs_src->refcnt;
1829 /* job */
1830 bs_dest->in_use = bs_src->in_use;
1831 bs_dest->job = bs_src->job;
1833 /* keep the same entry in bdrv_states */
1834 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1835 bs_src->device_name);
1836 bs_dest->device_list = bs_src->device_list;
1838 /* keep the same entry in graph_bdrv_states
1839 * We do want to swap name but don't want to swap linked list entries
1841 bs_dest->node_list = bs_src->node_list;
1845 * Swap bs contents for two image chains while they are live,
1846 * while keeping required fields on the BlockDriverState that is
1847 * actually attached to a device.
1849 * This will modify the BlockDriverState fields, and swap contents
1850 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1852 * bs_new is required to be anonymous.
1854 * This function does not create any image files.
1856 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
1858 BlockDriverState tmp;
1860 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1861 assert(bs_new->device_name[0] == '\0');
1862 assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
1863 assert(bs_new->job == NULL);
1864 assert(bs_new->dev == NULL);
1865 assert(bs_new->in_use == 0);
1866 assert(bs_new->io_limits_enabled == false);
1867 assert(!throttle_have_timer(&bs_new->throttle_state));
1869 tmp = *bs_new;
1870 *bs_new = *bs_old;
1871 *bs_old = tmp;
1873 /* there are some fields that should not be swapped, move them back */
1874 bdrv_move_feature_fields(&tmp, bs_old);
1875 bdrv_move_feature_fields(bs_old, bs_new);
1876 bdrv_move_feature_fields(bs_new, &tmp);
1878 /* bs_new shouldn't be in bdrv_states even after the swap! */
1879 assert(bs_new->device_name[0] == '\0');
1881 /* Check a few fields that should remain attached to the device */
1882 assert(bs_new->dev == NULL);
1883 assert(bs_new->job == NULL);
1884 assert(bs_new->in_use == 0);
1885 assert(bs_new->io_limits_enabled == false);
1886 assert(!throttle_have_timer(&bs_new->throttle_state));
1888 bdrv_rebind(bs_new);
1889 bdrv_rebind(bs_old);
1893 * Add new bs contents at the top of an image chain while the chain is
1894 * live, while keeping required fields on the top layer.
1896 * This will modify the BlockDriverState fields, and swap contents
1897 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1899 * bs_new is required to be anonymous.
1901 * This function does not create any image files.
1903 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
1905 bdrv_swap(bs_new, bs_top);
1907 /* The contents of 'tmp' will become bs_top, as we are
1908 * swapping bs_new and bs_top contents. */
1909 bs_top->backing_hd = bs_new;
1910 bs_top->open_flags &= ~BDRV_O_NO_BACKING;
1911 pstrcpy(bs_top->backing_file, sizeof(bs_top->backing_file),
1912 bs_new->filename);
1913 pstrcpy(bs_top->backing_format, sizeof(bs_top->backing_format),
1914 bs_new->drv ? bs_new->drv->format_name : "");
1917 static void bdrv_delete(BlockDriverState *bs)
1919 assert(!bs->dev);
1920 assert(!bs->job);
1921 assert(!bs->in_use);
1922 assert(!bs->refcnt);
1923 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
1925 bdrv_close(bs);
1927 /* remove from list, if necessary */
1928 bdrv_make_anon(bs);
1930 g_free(bs);
1933 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
1934 /* TODO change to DeviceState *dev when all users are qdevified */
1936 if (bs->dev) {
1937 return -EBUSY;
1939 bs->dev = dev;
1940 bdrv_iostatus_reset(bs);
1941 return 0;
1944 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1945 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
1947 if (bdrv_attach_dev(bs, dev) < 0) {
1948 abort();
1952 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
1953 /* TODO change to DeviceState *dev when all users are qdevified */
1955 assert(bs->dev == dev);
1956 bs->dev = NULL;
1957 bs->dev_ops = NULL;
1958 bs->dev_opaque = NULL;
1959 bs->guest_block_size = 512;
1962 /* TODO change to return DeviceState * when all users are qdevified */
1963 void *bdrv_get_attached_dev(BlockDriverState *bs)
1965 return bs->dev;
1968 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
1969 void *opaque)
1971 bs->dev_ops = ops;
1972 bs->dev_opaque = opaque;
1975 void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
1976 enum MonitorEvent ev,
1977 BlockErrorAction action, bool is_read)
1979 QObject *data;
1980 const char *action_str;
1982 switch (action) {
1983 case BDRV_ACTION_REPORT:
1984 action_str = "report";
1985 break;
1986 case BDRV_ACTION_IGNORE:
1987 action_str = "ignore";
1988 break;
1989 case BDRV_ACTION_STOP:
1990 action_str = "stop";
1991 break;
1992 default:
1993 abort();
1996 data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
1997 bdrv->device_name,
1998 action_str,
1999 is_read ? "read" : "write");
2000 monitor_protocol_event(ev, data);
2002 qobject_decref(data);
2005 static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
2007 QObject *data;
2009 data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
2010 bdrv_get_device_name(bs), ejected);
2011 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);
2013 qobject_decref(data);
2016 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2018 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2019 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2020 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2021 if (tray_was_closed) {
2022 /* tray open */
2023 bdrv_emit_qmp_eject_event(bs, true);
2025 if (load) {
2026 /* tray close */
2027 bdrv_emit_qmp_eject_event(bs, false);
2032 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2034 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2037 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2039 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2040 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2044 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2046 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2047 return bs->dev_ops->is_tray_open(bs->dev_opaque);
2049 return false;
2052 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2054 if (bs->dev_ops && bs->dev_ops->resize_cb) {
2055 bs->dev_ops->resize_cb(bs->dev_opaque);
2059 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2061 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2062 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2064 return false;
2068 * Run consistency checks on an image
2070 * Returns 0 if the check could be completed (it doesn't mean that the image is
2071 * free of errors) or -errno when an internal error occurred. The results of the
2072 * check are stored in res.
2074 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2076 if (bs->drv->bdrv_check == NULL) {
2077 return -ENOTSUP;
2080 memset(res, 0, sizeof(*res));
2081 return bs->drv->bdrv_check(bs, res, fix);
2084 #define COMMIT_BUF_SECTORS 2048
2086 /* commit COW file into the raw image */
2087 int bdrv_commit(BlockDriverState *bs)
2089 BlockDriver *drv = bs->drv;
2090 int64_t sector, total_sectors, length, backing_length;
2091 int n, ro, open_flags;
2092 int ret = 0;
2093 uint8_t *buf = NULL;
2094 char filename[PATH_MAX];
2096 if (!drv)
2097 return -ENOMEDIUM;
2099 if (!bs->backing_hd) {
2100 return -ENOTSUP;
2103 if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
2104 return -EBUSY;
2107 ro = bs->backing_hd->read_only;
2108 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2109 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2110 open_flags = bs->backing_hd->open_flags;
2112 if (ro) {
2113 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2114 return -EACCES;
2118 length = bdrv_getlength(bs);
2119 if (length < 0) {
2120 ret = length;
2121 goto ro_cleanup;
2124 backing_length = bdrv_getlength(bs->backing_hd);
2125 if (backing_length < 0) {
2126 ret = backing_length;
2127 goto ro_cleanup;
2130 /* If our top snapshot is larger than the backing file image,
2131 * grow the backing file image if possible. If not possible,
2132 * we must return an error */
2133 if (length > backing_length) {
2134 ret = bdrv_truncate(bs->backing_hd, length);
2135 if (ret < 0) {
2136 goto ro_cleanup;
2140 total_sectors = length >> BDRV_SECTOR_BITS;
2141 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2143 for (sector = 0; sector < total_sectors; sector += n) {
2144 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2145 if (ret < 0) {
2146 goto ro_cleanup;
2148 if (ret) {
2149 ret = bdrv_read(bs, sector, buf, n);
2150 if (ret < 0) {
2151 goto ro_cleanup;
2154 ret = bdrv_write(bs->backing_hd, sector, buf, n);
2155 if (ret < 0) {
2156 goto ro_cleanup;
2161 if (drv->bdrv_make_empty) {
2162 ret = drv->bdrv_make_empty(bs);
2163 if (ret < 0) {
2164 goto ro_cleanup;
2166 bdrv_flush(bs);
2170 * Make sure all data we wrote to the backing device is actually
2171 * stable on disk.
2173 if (bs->backing_hd) {
2174 bdrv_flush(bs->backing_hd);
2177 ret = 0;
2178 ro_cleanup:
2179 g_free(buf);
2181 if (ro) {
2182 /* ignoring error return here */
2183 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2186 return ret;
2189 int bdrv_commit_all(void)
2191 BlockDriverState *bs;
2193 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2194 if (bs->drv && bs->backing_hd) {
2195 int ret = bdrv_commit(bs);
2196 if (ret < 0) {
2197 return ret;
2201 return 0;
2205 * Remove an active request from the tracked requests list
2207 * This function should be called when a tracked request is completing.
2209 static void tracked_request_end(BdrvTrackedRequest *req)
2211 if (req->serialising) {
2212 req->bs->serialising_in_flight--;
2215 QLIST_REMOVE(req, list);
2216 qemu_co_queue_restart_all(&req->wait_queue);
2220 * Add an active request to the tracked requests list
2222 static void tracked_request_begin(BdrvTrackedRequest *req,
2223 BlockDriverState *bs,
2224 int64_t offset,
2225 unsigned int bytes, bool is_write)
2227 *req = (BdrvTrackedRequest){
2228 .bs = bs,
2229 .offset = offset,
2230 .bytes = bytes,
2231 .is_write = is_write,
2232 .co = qemu_coroutine_self(),
2233 .serialising = false,
2234 .overlap_offset = offset,
2235 .overlap_bytes = bytes,
2238 qemu_co_queue_init(&req->wait_queue);
2240 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2243 static void mark_request_serialising(BdrvTrackedRequest *req, size_t align)
2245 int64_t overlap_offset = req->offset & ~(align - 1);
2246 int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2247 - overlap_offset;
2249 if (!req->serialising) {
2250 req->bs->serialising_in_flight++;
2251 req->serialising = true;
2254 req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2255 req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2259 * Round a region to cluster boundaries
2261 void bdrv_round_to_clusters(BlockDriverState *bs,
2262 int64_t sector_num, int nb_sectors,
2263 int64_t *cluster_sector_num,
2264 int *cluster_nb_sectors)
2266 BlockDriverInfo bdi;
2268 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2269 *cluster_sector_num = sector_num;
2270 *cluster_nb_sectors = nb_sectors;
2271 } else {
2272 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2273 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2274 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2275 nb_sectors, c);
2279 static int bdrv_get_cluster_size(BlockDriverState *bs)
2281 BlockDriverInfo bdi;
2282 int ret;
2284 ret = bdrv_get_info(bs, &bdi);
2285 if (ret < 0 || bdi.cluster_size == 0) {
2286 return bs->request_alignment;
2287 } else {
2288 return bdi.cluster_size;
2292 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2293 int64_t offset, unsigned int bytes)
2295 /* aaaa bbbb */
2296 if (offset >= req->overlap_offset + req->overlap_bytes) {
2297 return false;
2299 /* bbbb aaaa */
2300 if (req->overlap_offset >= offset + bytes) {
2301 return false;
2303 return true;
2306 static void coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2308 BlockDriverState *bs = self->bs;
2309 BdrvTrackedRequest *req;
2310 bool retry;
2312 if (!bs->serialising_in_flight) {
2313 return;
2316 do {
2317 retry = false;
2318 QLIST_FOREACH(req, &bs->tracked_requests, list) {
2319 if (req == self || (!req->serialising && !self->serialising)) {
2320 continue;
2322 if (tracked_request_overlaps(req, self->overlap_offset,
2323 self->overlap_bytes))
2325 /* Hitting this means there was a reentrant request, for
2326 * example, a block driver issuing nested requests. This must
2327 * never happen since it means deadlock.
2329 assert(qemu_coroutine_self() != req->co);
2331 /* If the request is already (indirectly) waiting for us, or
2332 * will wait for us as soon as it wakes up, then just go on
2333 * (instead of producing a deadlock in the former case). */
2334 if (!req->waiting_for) {
2335 self->waiting_for = req;
2336 qemu_co_queue_wait(&req->wait_queue);
2337 self->waiting_for = NULL;
2338 retry = true;
2339 break;
2343 } while (retry);
2347 * Return values:
2348 * 0 - success
2349 * -EINVAL - backing format specified, but no file
2350 * -ENOSPC - can't update the backing file because no space is left in the
2351 * image file header
2352 * -ENOTSUP - format driver doesn't support changing the backing file
2354 int bdrv_change_backing_file(BlockDriverState *bs,
2355 const char *backing_file, const char *backing_fmt)
2357 BlockDriver *drv = bs->drv;
2358 int ret;
2360 /* Backing file format doesn't make sense without a backing file */
2361 if (backing_fmt && !backing_file) {
2362 return -EINVAL;
2365 if (drv->bdrv_change_backing_file != NULL) {
2366 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2367 } else {
2368 ret = -ENOTSUP;
2371 if (ret == 0) {
2372 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2373 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2375 return ret;
2379 * Finds the image layer in the chain that has 'bs' as its backing file.
2381 * active is the current topmost image.
2383 * Returns NULL if bs is not found in active's image chain,
2384 * or if active == bs.
2386 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2387 BlockDriverState *bs)
2389 BlockDriverState *overlay = NULL;
2390 BlockDriverState *intermediate;
2392 assert(active != NULL);
2393 assert(bs != NULL);
2395 /* if bs is the same as active, then by definition it has no overlay
2397 if (active == bs) {
2398 return NULL;
2401 intermediate = active;
2402 while (intermediate->backing_hd) {
2403 if (intermediate->backing_hd == bs) {
2404 overlay = intermediate;
2405 break;
2407 intermediate = intermediate->backing_hd;
2410 return overlay;
2413 typedef struct BlkIntermediateStates {
2414 BlockDriverState *bs;
2415 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2416 } BlkIntermediateStates;
2420 * Drops images above 'base' up to and including 'top', and sets the image
2421 * above 'top' to have base as its backing file.
2423 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2424 * information in 'bs' can be properly updated.
2426 * E.g., this will convert the following chain:
2427 * bottom <- base <- intermediate <- top <- active
2429 * to
2431 * bottom <- base <- active
2433 * It is allowed for bottom==base, in which case it converts:
2435 * base <- intermediate <- top <- active
2437 * to
2439 * base <- active
2441 * Error conditions:
2442 * if active == top, that is considered an error
2445 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2446 BlockDriverState *base)
2448 BlockDriverState *intermediate;
2449 BlockDriverState *base_bs = NULL;
2450 BlockDriverState *new_top_bs = NULL;
2451 BlkIntermediateStates *intermediate_state, *next;
2452 int ret = -EIO;
2454 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2455 QSIMPLEQ_INIT(&states_to_delete);
2457 if (!top->drv || !base->drv) {
2458 goto exit;
2461 new_top_bs = bdrv_find_overlay(active, top);
2463 if (new_top_bs == NULL) {
2464 /* we could not find the image above 'top', this is an error */
2465 goto exit;
2468 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2469 * to do, no intermediate images */
2470 if (new_top_bs->backing_hd == base) {
2471 ret = 0;
2472 goto exit;
2475 intermediate = top;
2477 /* now we will go down through the list, and add each BDS we find
2478 * into our deletion queue, until we hit the 'base'
2480 while (intermediate) {
2481 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2482 intermediate_state->bs = intermediate;
2483 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2485 if (intermediate->backing_hd == base) {
2486 base_bs = intermediate->backing_hd;
2487 break;
2489 intermediate = intermediate->backing_hd;
2491 if (base_bs == NULL) {
2492 /* something went wrong, we did not end at the base. safely
2493 * unravel everything, and exit with error */
2494 goto exit;
2497 /* success - we can delete the intermediate states, and link top->base */
2498 ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2499 base_bs->drv ? base_bs->drv->format_name : "");
2500 if (ret) {
2501 goto exit;
2503 new_top_bs->backing_hd = base_bs;
2505 bdrv_refresh_limits(new_top_bs);
2507 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2508 /* so that bdrv_close() does not recursively close the chain */
2509 intermediate_state->bs->backing_hd = NULL;
2510 bdrv_unref(intermediate_state->bs);
2512 ret = 0;
2514 exit:
2515 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2516 g_free(intermediate_state);
2518 return ret;
2522 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2523 size_t size)
2525 int64_t len;
2527 if (!bdrv_is_inserted(bs))
2528 return -ENOMEDIUM;
2530 if (bs->growable)
2531 return 0;
2533 len = bdrv_getlength(bs);
2535 if (offset < 0)
2536 return -EIO;
2538 if ((offset > len) || (len - offset < size))
2539 return -EIO;
2541 return 0;
2544 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2545 int nb_sectors)
2547 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2548 nb_sectors * BDRV_SECTOR_SIZE);
2551 typedef struct RwCo {
2552 BlockDriverState *bs;
2553 int64_t sector_num;
2554 int nb_sectors;
2555 QEMUIOVector *qiov;
2556 bool is_write;
2557 int ret;
2558 BdrvRequestFlags flags;
2559 } RwCo;
2561 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2563 RwCo *rwco = opaque;
2565 if (!rwco->is_write) {
2566 rwco->ret = bdrv_co_do_readv(rwco->bs, rwco->sector_num,
2567 rwco->nb_sectors, rwco->qiov,
2568 rwco->flags);
2569 } else {
2570 rwco->ret = bdrv_co_do_writev(rwco->bs, rwco->sector_num,
2571 rwco->nb_sectors, rwco->qiov,
2572 rwco->flags);
2577 * Process a vectored synchronous request using coroutines
2579 static int bdrv_rwv_co(BlockDriverState *bs, int64_t sector_num,
2580 QEMUIOVector *qiov, bool is_write,
2581 BdrvRequestFlags flags)
2583 Coroutine *co;
2584 RwCo rwco = {
2585 .bs = bs,
2586 .sector_num = sector_num,
2587 .nb_sectors = qiov->size >> BDRV_SECTOR_BITS,
2588 .qiov = qiov,
2589 .is_write = is_write,
2590 .ret = NOT_DONE,
2591 .flags = flags,
2593 assert((qiov->size & (BDRV_SECTOR_SIZE - 1)) == 0);
2596 * In sync call context, when the vcpu is blocked, this throttling timer
2597 * will not fire; so the I/O throttling function has to be disabled here
2598 * if it has been enabled.
2600 if (bs->io_limits_enabled) {
2601 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2602 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2603 bdrv_io_limits_disable(bs);
2606 if (qemu_in_coroutine()) {
2607 /* Fast-path if already in coroutine context */
2608 bdrv_rw_co_entry(&rwco);
2609 } else {
2610 co = qemu_coroutine_create(bdrv_rw_co_entry);
2611 qemu_coroutine_enter(co, &rwco);
2612 while (rwco.ret == NOT_DONE) {
2613 qemu_aio_wait();
2616 return rwco.ret;
2620 * Process a synchronous request using coroutines
2622 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2623 int nb_sectors, bool is_write, BdrvRequestFlags flags)
2625 QEMUIOVector qiov;
2626 struct iovec iov = {
2627 .iov_base = (void *)buf,
2628 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2631 qemu_iovec_init_external(&qiov, &iov, 1);
2632 return bdrv_rwv_co(bs, sector_num, &qiov, is_write, flags);
2635 /* return < 0 if error. See bdrv_write() for the return codes */
2636 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2637 uint8_t *buf, int nb_sectors)
2639 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2642 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2643 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2644 uint8_t *buf, int nb_sectors)
2646 bool enabled;
2647 int ret;
2649 enabled = bs->io_limits_enabled;
2650 bs->io_limits_enabled = false;
2651 ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2652 bs->io_limits_enabled = enabled;
2653 return ret;
2656 /* Return < 0 if error. Important errors are:
2657 -EIO generic I/O error (may happen for all errors)
2658 -ENOMEDIUM No media inserted.
2659 -EINVAL Invalid sector number or nb_sectors
2660 -EACCES Trying to write a read-only device
2662 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2663 const uint8_t *buf, int nb_sectors)
2665 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2668 int bdrv_writev(BlockDriverState *bs, int64_t sector_num, QEMUIOVector *qiov)
2670 return bdrv_rwv_co(bs, sector_num, qiov, true, 0);
2673 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2674 int nb_sectors, BdrvRequestFlags flags)
2676 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2677 BDRV_REQ_ZERO_WRITE | flags);
2681 * Completely zero out a block device with the help of bdrv_write_zeroes.
2682 * The operation is sped up by checking the block status and only writing
2683 * zeroes to the device if they currently do not return zeroes. Optional
2684 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2686 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2688 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2690 int64_t target_size = bdrv_getlength(bs) / BDRV_SECTOR_SIZE;
2691 int64_t ret, nb_sectors, sector_num = 0;
2692 int n;
2694 for (;;) {
2695 nb_sectors = target_size - sector_num;
2696 if (nb_sectors <= 0) {
2697 return 0;
2699 if (nb_sectors > INT_MAX) {
2700 nb_sectors = INT_MAX;
2702 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2703 if (ret < 0) {
2704 error_report("error getting block status at sector %" PRId64 ": %s",
2705 sector_num, strerror(-ret));
2706 return ret;
2708 if (ret & BDRV_BLOCK_ZERO) {
2709 sector_num += n;
2710 continue;
2712 ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2713 if (ret < 0) {
2714 error_report("error writing zeroes at sector %" PRId64 ": %s",
2715 sector_num, strerror(-ret));
2716 return ret;
2718 sector_num += n;
2722 int bdrv_pread(BlockDriverState *bs, int64_t offset,
2723 void *buf, int count1)
2725 uint8_t tmp_buf[BDRV_SECTOR_SIZE];
2726 int len, nb_sectors, count;
2727 int64_t sector_num;
2728 int ret;
2730 count = count1;
2731 /* first read to align to sector start */
2732 len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
2733 if (len > count)
2734 len = count;
2735 sector_num = offset >> BDRV_SECTOR_BITS;
2736 if (len > 0) {
2737 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2738 return ret;
2739 memcpy(buf, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)), len);
2740 count -= len;
2741 if (count == 0)
2742 return count1;
2743 sector_num++;
2744 buf += len;
2747 /* read the sectors "in place" */
2748 nb_sectors = count >> BDRV_SECTOR_BITS;
2749 if (nb_sectors > 0) {
2750 if ((ret = bdrv_read(bs, sector_num, buf, nb_sectors)) < 0)
2751 return ret;
2752 sector_num += nb_sectors;
2753 len = nb_sectors << BDRV_SECTOR_BITS;
2754 buf += len;
2755 count -= len;
2758 /* add data from the last sector */
2759 if (count > 0) {
2760 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2761 return ret;
2762 memcpy(buf, tmp_buf, count);
2764 return count1;
2767 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2769 uint8_t tmp_buf[BDRV_SECTOR_SIZE];
2770 int len, nb_sectors, count;
2771 int64_t sector_num;
2772 int ret;
2774 count = qiov->size;
2776 /* first write to align to sector start */
2777 len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
2778 if (len > count)
2779 len = count;
2780 sector_num = offset >> BDRV_SECTOR_BITS;
2781 if (len > 0) {
2782 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2783 return ret;
2784 qemu_iovec_to_buf(qiov, 0, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)),
2785 len);
2786 if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
2787 return ret;
2788 count -= len;
2789 if (count == 0)
2790 return qiov->size;
2791 sector_num++;
2794 /* write the sectors "in place" */
2795 nb_sectors = count >> BDRV_SECTOR_BITS;
2796 if (nb_sectors > 0) {
2797 QEMUIOVector qiov_inplace;
2799 qemu_iovec_init(&qiov_inplace, qiov->niov);
2800 qemu_iovec_concat(&qiov_inplace, qiov, len,
2801 nb_sectors << BDRV_SECTOR_BITS);
2802 ret = bdrv_writev(bs, sector_num, &qiov_inplace);
2803 qemu_iovec_destroy(&qiov_inplace);
2804 if (ret < 0) {
2805 return ret;
2808 sector_num += nb_sectors;
2809 len = nb_sectors << BDRV_SECTOR_BITS;
2810 count -= len;
2813 /* add data from the last sector */
2814 if (count > 0) {
2815 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2816 return ret;
2817 qemu_iovec_to_buf(qiov, qiov->size - count, tmp_buf, count);
2818 if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
2819 return ret;
2821 return qiov->size;
2824 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2825 const void *buf, int count1)
2827 QEMUIOVector qiov;
2828 struct iovec iov = {
2829 .iov_base = (void *) buf,
2830 .iov_len = count1,
2833 qemu_iovec_init_external(&qiov, &iov, 1);
2834 return bdrv_pwritev(bs, offset, &qiov);
2838 * Writes to the file and ensures that no writes are reordered across this
2839 * request (acts as a barrier)
2841 * Returns 0 on success, -errno in error cases.
2843 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2844 const void *buf, int count)
2846 int ret;
2848 ret = bdrv_pwrite(bs, offset, buf, count);
2849 if (ret < 0) {
2850 return ret;
2853 /* No flush needed for cache modes that already do it */
2854 if (bs->enable_write_cache) {
2855 bdrv_flush(bs);
2858 return 0;
2861 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2862 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2864 /* Perform I/O through a temporary buffer so that users who scribble over
2865 * their read buffer while the operation is in progress do not end up
2866 * modifying the image file. This is critical for zero-copy guest I/O
2867 * where anything might happen inside guest memory.
2869 void *bounce_buffer;
2871 BlockDriver *drv = bs->drv;
2872 struct iovec iov;
2873 QEMUIOVector bounce_qiov;
2874 int64_t cluster_sector_num;
2875 int cluster_nb_sectors;
2876 size_t skip_bytes;
2877 int ret;
2879 /* Cover entire cluster so no additional backing file I/O is required when
2880 * allocating cluster in the image file.
2882 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2883 &cluster_sector_num, &cluster_nb_sectors);
2885 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2886 cluster_sector_num, cluster_nb_sectors);
2888 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2889 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2890 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2892 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2893 &bounce_qiov);
2894 if (ret < 0) {
2895 goto err;
2898 if (drv->bdrv_co_write_zeroes &&
2899 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2900 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2901 cluster_nb_sectors, 0);
2902 } else {
2903 /* This does not change the data on the disk, it is not necessary
2904 * to flush even in cache=writethrough mode.
2906 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2907 &bounce_qiov);
2910 if (ret < 0) {
2911 /* It might be okay to ignore write errors for guest requests. If this
2912 * is a deliberate copy-on-read then we don't want to ignore the error.
2913 * Simply report it in all cases.
2915 goto err;
2918 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2919 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2920 nb_sectors * BDRV_SECTOR_SIZE);
2922 err:
2923 qemu_vfree(bounce_buffer);
2924 return ret;
2928 * Forwards an already correctly aligned request to the BlockDriver. This
2929 * handles copy on read and zeroing after EOF; any other features must be
2930 * implemented by the caller.
2932 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
2933 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
2934 int64_t align, QEMUIOVector *qiov, int flags)
2936 BlockDriver *drv = bs->drv;
2937 int ret;
2939 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
2940 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
2942 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
2943 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
2945 /* Handle Copy on Read and associated serialisation */
2946 if (flags & BDRV_REQ_COPY_ON_READ) {
2947 /* If we touch the same cluster it counts as an overlap. This
2948 * guarantees that allocating writes will be serialized and not race
2949 * with each other for the same cluster. For example, in copy-on-read
2950 * it ensures that the CoR read and write operations are atomic and
2951 * guest writes cannot interleave between them. */
2952 mark_request_serialising(req, bdrv_get_cluster_size(bs));
2955 wait_serialising_requests(req);
2957 if (flags & BDRV_REQ_COPY_ON_READ) {
2958 int pnum;
2960 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
2961 if (ret < 0) {
2962 goto out;
2965 if (!ret || pnum != nb_sectors) {
2966 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
2967 goto out;
2971 /* Forward the request to the BlockDriver */
2972 if (!(bs->zero_beyond_eof && bs->growable)) {
2973 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
2974 } else {
2975 /* Read zeros after EOF of growable BDSes */
2976 int64_t len, total_sectors, max_nb_sectors;
2978 len = bdrv_getlength(bs);
2979 if (len < 0) {
2980 ret = len;
2981 goto out;
2984 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
2985 max_nb_sectors = MAX(0, ROUND_UP(total_sectors - sector_num,
2986 align >> BDRV_SECTOR_BITS));
2987 if (max_nb_sectors > 0) {
2988 ret = drv->bdrv_co_readv(bs, sector_num,
2989 MIN(nb_sectors, max_nb_sectors), qiov);
2990 } else {
2991 ret = 0;
2994 /* Reading beyond end of file is supposed to produce zeroes */
2995 if (ret == 0 && total_sectors < sector_num + nb_sectors) {
2996 uint64_t offset = MAX(0, total_sectors - sector_num);
2997 uint64_t bytes = (sector_num + nb_sectors - offset) *
2998 BDRV_SECTOR_SIZE;
2999 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
3003 out:
3004 return ret;
3008 * Handle a read request in coroutine context
3010 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
3011 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3012 BdrvRequestFlags flags)
3014 BlockDriver *drv = bs->drv;
3015 BdrvTrackedRequest req;
3017 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3018 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3019 uint8_t *head_buf = NULL;
3020 uint8_t *tail_buf = NULL;
3021 QEMUIOVector local_qiov;
3022 bool use_local_qiov = false;
3023 int ret;
3025 if (!drv) {
3026 return -ENOMEDIUM;
3028 if (bdrv_check_byte_request(bs, offset, bytes)) {
3029 return -EIO;
3032 if (bs->copy_on_read) {
3033 flags |= BDRV_REQ_COPY_ON_READ;
3036 /* throttling disk I/O */
3037 if (bs->io_limits_enabled) {
3038 /* TODO Switch to byte granularity */
3039 bdrv_io_limits_intercept(bs, bytes >> BDRV_SECTOR_BITS, false);
3042 /* Align read if necessary by padding qiov */
3043 if (offset & (align - 1)) {
3044 head_buf = qemu_blockalign(bs, align);
3045 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3046 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3047 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3048 use_local_qiov = true;
3050 bytes += offset & (align - 1);
3051 offset = offset & ~(align - 1);
3054 if ((offset + bytes) & (align - 1)) {
3055 if (!use_local_qiov) {
3056 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3057 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3058 use_local_qiov = true;
3060 tail_buf = qemu_blockalign(bs, align);
3061 qemu_iovec_add(&local_qiov, tail_buf,
3062 align - ((offset + bytes) & (align - 1)));
3064 bytes = ROUND_UP(bytes, align);
3067 tracked_request_begin(&req, bs, offset, bytes, false);
3068 ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3069 use_local_qiov ? &local_qiov : qiov,
3070 flags);
3071 tracked_request_end(&req);
3073 if (use_local_qiov) {
3074 qemu_iovec_destroy(&local_qiov);
3075 qemu_vfree(head_buf);
3076 qemu_vfree(tail_buf);
3079 return ret;
3082 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3083 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3084 BdrvRequestFlags flags)
3086 if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3087 return -EINVAL;
3090 return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3091 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3094 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3095 int nb_sectors, QEMUIOVector *qiov)
3097 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3099 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3102 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3103 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3105 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3107 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3108 BDRV_REQ_COPY_ON_READ);
3111 /* if no limit is specified in the BlockLimits use a default
3112 * of 32768 512-byte sectors (16 MiB) per request.
3114 #define MAX_WRITE_ZEROES_DEFAULT 32768
3116 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3117 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3119 BlockDriver *drv = bs->drv;
3120 QEMUIOVector qiov;
3121 struct iovec iov = {0};
3122 int ret = 0;
3124 int max_write_zeroes = bs->bl.max_write_zeroes ?
3125 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3127 while (nb_sectors > 0 && !ret) {
3128 int num = nb_sectors;
3130 /* Align request. Block drivers can expect the "bulk" of the request
3131 * to be aligned.
3133 if (bs->bl.write_zeroes_alignment
3134 && num > bs->bl.write_zeroes_alignment) {
3135 if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3136 /* Make a small request up to the first aligned sector. */
3137 num = bs->bl.write_zeroes_alignment;
3138 num -= sector_num % bs->bl.write_zeroes_alignment;
3139 } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3140 /* Shorten the request to the last aligned sector. num cannot
3141 * underflow because num > bs->bl.write_zeroes_alignment.
3143 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3147 /* limit request size */
3148 if (num > max_write_zeroes) {
3149 num = max_write_zeroes;
3152 ret = -ENOTSUP;
3153 /* First try the efficient write zeroes operation */
3154 if (drv->bdrv_co_write_zeroes) {
3155 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3158 if (ret == -ENOTSUP) {
3159 /* Fall back to bounce buffer if write zeroes is unsupported */
3160 iov.iov_len = num * BDRV_SECTOR_SIZE;
3161 if (iov.iov_base == NULL) {
3162 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3163 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3165 qemu_iovec_init_external(&qiov, &iov, 1);
3167 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3169 /* Keep bounce buffer around if it is big enough for all
3170 * all future requests.
3172 if (num < max_write_zeroes) {
3173 qemu_vfree(iov.iov_base);
3174 iov.iov_base = NULL;
3178 sector_num += num;
3179 nb_sectors -= num;
3182 qemu_vfree(iov.iov_base);
3183 return ret;
3187 * Forwards an already correctly aligned write request to the BlockDriver.
3189 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3190 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3191 QEMUIOVector *qiov, int flags)
3193 BlockDriver *drv = bs->drv;
3194 int ret;
3196 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3197 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3199 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3200 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3202 wait_serialising_requests(req);
3204 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3206 if (ret < 0) {
3207 /* Do nothing, write notifier decided to fail this request */
3208 } else if (flags & BDRV_REQ_ZERO_WRITE) {
3209 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3210 } else {
3211 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3214 if (ret == 0 && !bs->enable_write_cache) {
3215 ret = bdrv_co_flush(bs);
3218 bdrv_set_dirty(bs, sector_num, nb_sectors);
3220 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3221 bs->wr_highest_sector = sector_num + nb_sectors - 1;
3223 if (bs->growable && ret >= 0) {
3224 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3227 return ret;
3231 * Handle a write request in coroutine context
3233 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3234 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3235 BdrvRequestFlags flags)
3237 BdrvTrackedRequest req;
3238 int ret;
3240 if (!bs->drv) {
3241 return -ENOMEDIUM;
3243 if (bs->read_only) {
3244 return -EACCES;
3246 if (bdrv_check_byte_request(bs, offset, bytes)) {
3247 return -EIO;
3250 /* throttling disk I/O */
3251 if (bs->io_limits_enabled) {
3252 /* TODO Switch to byte granularity */
3253 bdrv_io_limits_intercept(bs, bytes >> BDRV_SECTOR_BITS, true);
3256 tracked_request_begin(&req, bs, offset, bytes, true);
3257 ret = bdrv_aligned_pwritev(bs, &req, offset, bytes, qiov, flags);
3258 tracked_request_end(&req);
3260 return ret;
3263 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3264 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3265 BdrvRequestFlags flags)
3267 if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3268 return -EINVAL;
3271 return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3272 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3275 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3276 int nb_sectors, QEMUIOVector *qiov)
3278 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3280 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3283 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3284 int64_t sector_num, int nb_sectors,
3285 BdrvRequestFlags flags)
3287 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3289 if (!(bs->open_flags & BDRV_O_UNMAP)) {
3290 flags &= ~BDRV_REQ_MAY_UNMAP;
3293 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3294 BDRV_REQ_ZERO_WRITE | flags);
3298 * Truncate file to 'offset' bytes (needed only for file protocols)
3300 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3302 BlockDriver *drv = bs->drv;
3303 int ret;
3304 if (!drv)
3305 return -ENOMEDIUM;
3306 if (!drv->bdrv_truncate)
3307 return -ENOTSUP;
3308 if (bs->read_only)
3309 return -EACCES;
3310 if (bdrv_in_use(bs))
3311 return -EBUSY;
3312 ret = drv->bdrv_truncate(bs, offset);
3313 if (ret == 0) {
3314 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3315 bdrv_dev_resize_cb(bs);
3317 return ret;
3321 * Length of a allocated file in bytes. Sparse files are counted by actual
3322 * allocated space. Return < 0 if error or unknown.
3324 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3326 BlockDriver *drv = bs->drv;
3327 if (!drv) {
3328 return -ENOMEDIUM;
3330 if (drv->bdrv_get_allocated_file_size) {
3331 return drv->bdrv_get_allocated_file_size(bs);
3333 if (bs->file) {
3334 return bdrv_get_allocated_file_size(bs->file);
3336 return -ENOTSUP;
3340 * Length of a file in bytes. Return < 0 if error or unknown.
3342 int64_t bdrv_getlength(BlockDriverState *bs)
3344 BlockDriver *drv = bs->drv;
3345 if (!drv)
3346 return -ENOMEDIUM;
3348 if (drv->has_variable_length) {
3349 int ret = refresh_total_sectors(bs, bs->total_sectors);
3350 if (ret < 0) {
3351 return ret;
3354 return bs->total_sectors * BDRV_SECTOR_SIZE;
3357 /* return 0 as number of sectors if no device present or error */
3358 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3360 int64_t length;
3361 length = bdrv_getlength(bs);
3362 if (length < 0)
3363 length = 0;
3364 else
3365 length = length >> BDRV_SECTOR_BITS;
3366 *nb_sectors_ptr = length;
3369 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3370 BlockdevOnError on_write_error)
3372 bs->on_read_error = on_read_error;
3373 bs->on_write_error = on_write_error;
3376 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3378 return is_read ? bs->on_read_error : bs->on_write_error;
3381 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3383 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3385 switch (on_err) {
3386 case BLOCKDEV_ON_ERROR_ENOSPC:
3387 return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT;
3388 case BLOCKDEV_ON_ERROR_STOP:
3389 return BDRV_ACTION_STOP;
3390 case BLOCKDEV_ON_ERROR_REPORT:
3391 return BDRV_ACTION_REPORT;
3392 case BLOCKDEV_ON_ERROR_IGNORE:
3393 return BDRV_ACTION_IGNORE;
3394 default:
3395 abort();
3399 /* This is done by device models because, while the block layer knows
3400 * about the error, it does not know whether an operation comes from
3401 * the device or the block layer (from a job, for example).
3403 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3404 bool is_read, int error)
3406 assert(error >= 0);
3407 bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
3408 if (action == BDRV_ACTION_STOP) {
3409 vm_stop(RUN_STATE_IO_ERROR);
3410 bdrv_iostatus_set_err(bs, error);
3414 int bdrv_is_read_only(BlockDriverState *bs)
3416 return bs->read_only;
3419 int bdrv_is_sg(BlockDriverState *bs)
3421 return bs->sg;
3424 int bdrv_enable_write_cache(BlockDriverState *bs)
3426 return bs->enable_write_cache;
3429 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3431 bs->enable_write_cache = wce;
3433 /* so a reopen() will preserve wce */
3434 if (wce) {
3435 bs->open_flags |= BDRV_O_CACHE_WB;
3436 } else {
3437 bs->open_flags &= ~BDRV_O_CACHE_WB;
3441 int bdrv_is_encrypted(BlockDriverState *bs)
3443 if (bs->backing_hd && bs->backing_hd->encrypted)
3444 return 1;
3445 return bs->encrypted;
3448 int bdrv_key_required(BlockDriverState *bs)
3450 BlockDriverState *backing_hd = bs->backing_hd;
3452 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3453 return 1;
3454 return (bs->encrypted && !bs->valid_key);
3457 int bdrv_set_key(BlockDriverState *bs, const char *key)
3459 int ret;
3460 if (bs->backing_hd && bs->backing_hd->encrypted) {
3461 ret = bdrv_set_key(bs->backing_hd, key);
3462 if (ret < 0)
3463 return ret;
3464 if (!bs->encrypted)
3465 return 0;
3467 if (!bs->encrypted) {
3468 return -EINVAL;
3469 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3470 return -ENOMEDIUM;
3472 ret = bs->drv->bdrv_set_key(bs, key);
3473 if (ret < 0) {
3474 bs->valid_key = 0;
3475 } else if (!bs->valid_key) {
3476 bs->valid_key = 1;
3477 /* call the change callback now, we skipped it on open */
3478 bdrv_dev_change_media_cb(bs, true);
3480 return ret;
3483 const char *bdrv_get_format_name(BlockDriverState *bs)
3485 return bs->drv ? bs->drv->format_name : NULL;
3488 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3489 void *opaque)
3491 BlockDriver *drv;
3493 QLIST_FOREACH(drv, &bdrv_drivers, list) {
3494 it(opaque, drv->format_name);
3498 /* This function is to find block backend bs */
3499 BlockDriverState *bdrv_find(const char *name)
3501 BlockDriverState *bs;
3503 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3504 if (!strcmp(name, bs->device_name)) {
3505 return bs;
3508 return NULL;
3511 /* This function is to find a node in the bs graph */
3512 BlockDriverState *bdrv_find_node(const char *node_name)
3514 BlockDriverState *bs;
3516 assert(node_name);
3518 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3519 if (!strcmp(node_name, bs->node_name)) {
3520 return bs;
3523 return NULL;
3526 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3527 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3529 BlockDeviceInfoList *list, *entry;
3530 BlockDriverState *bs;
3532 list = NULL;
3533 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3534 entry = g_malloc0(sizeof(*entry));
3535 entry->value = bdrv_block_device_info(bs);
3536 entry->next = list;
3537 list = entry;
3540 return list;
3543 BlockDriverState *bdrv_lookup_bs(const char *device,
3544 const char *node_name,
3545 Error **errp)
3547 BlockDriverState *bs = NULL;
3549 if ((!device && !node_name) || (device && node_name)) {
3550 error_setg(errp, "Use either device or node-name but not both");
3551 return NULL;
3554 if (device) {
3555 bs = bdrv_find(device);
3557 if (!bs) {
3558 error_set(errp, QERR_DEVICE_NOT_FOUND, device);
3559 return NULL;
3562 return bs;
3565 bs = bdrv_find_node(node_name);
3567 if (!bs) {
3568 error_set(errp, QERR_DEVICE_NOT_FOUND, node_name);
3569 return NULL;
3572 return bs;
3575 BlockDriverState *bdrv_next(BlockDriverState *bs)
3577 if (!bs) {
3578 return QTAILQ_FIRST(&bdrv_states);
3580 return QTAILQ_NEXT(bs, device_list);
3583 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3585 BlockDriverState *bs;
3587 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3588 it(opaque, bs);
3592 const char *bdrv_get_device_name(BlockDriverState *bs)
3594 return bs->device_name;
3597 int bdrv_get_flags(BlockDriverState *bs)
3599 return bs->open_flags;
3602 int bdrv_flush_all(void)
3604 BlockDriverState *bs;
3605 int result = 0;
3607 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3608 int ret = bdrv_flush(bs);
3609 if (ret < 0 && !result) {
3610 result = ret;
3614 return result;
3617 int bdrv_has_zero_init_1(BlockDriverState *bs)
3619 return 1;
3622 int bdrv_has_zero_init(BlockDriverState *bs)
3624 assert(bs->drv);
3626 /* If BS is a copy on write image, it is initialized to
3627 the contents of the base image, which may not be zeroes. */
3628 if (bs->backing_hd) {
3629 return 0;
3631 if (bs->drv->bdrv_has_zero_init) {
3632 return bs->drv->bdrv_has_zero_init(bs);
3635 /* safe default */
3636 return 0;
3639 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3641 BlockDriverInfo bdi;
3643 if (bs->backing_hd) {
3644 return false;
3647 if (bdrv_get_info(bs, &bdi) == 0) {
3648 return bdi.unallocated_blocks_are_zero;
3651 return false;
3654 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3656 BlockDriverInfo bdi;
3658 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3659 return false;
3662 if (bdrv_get_info(bs, &bdi) == 0) {
3663 return bdi.can_write_zeroes_with_unmap;
3666 return false;
3669 typedef struct BdrvCoGetBlockStatusData {
3670 BlockDriverState *bs;
3671 BlockDriverState *base;
3672 int64_t sector_num;
3673 int nb_sectors;
3674 int *pnum;
3675 int64_t ret;
3676 bool done;
3677 } BdrvCoGetBlockStatusData;
3680 * Returns true iff the specified sector is present in the disk image. Drivers
3681 * not implementing the functionality are assumed to not support backing files,
3682 * hence all their sectors are reported as allocated.
3684 * If 'sector_num' is beyond the end of the disk image the return value is 0
3685 * and 'pnum' is set to 0.
3687 * 'pnum' is set to the number of sectors (including and immediately following
3688 * the specified sector) that are known to be in the same
3689 * allocated/unallocated state.
3691 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3692 * beyond the end of the disk image it will be clamped.
3694 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3695 int64_t sector_num,
3696 int nb_sectors, int *pnum)
3698 int64_t length;
3699 int64_t n;
3700 int64_t ret, ret2;
3702 length = bdrv_getlength(bs);
3703 if (length < 0) {
3704 return length;
3707 if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3708 *pnum = 0;
3709 return 0;
3712 n = bs->total_sectors - sector_num;
3713 if (n < nb_sectors) {
3714 nb_sectors = n;
3717 if (!bs->drv->bdrv_co_get_block_status) {
3718 *pnum = nb_sectors;
3719 ret = BDRV_BLOCK_DATA;
3720 if (bs->drv->protocol_name) {
3721 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3723 return ret;
3726 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3727 if (ret < 0) {
3728 *pnum = 0;
3729 return ret;
3732 if (ret & BDRV_BLOCK_RAW) {
3733 assert(ret & BDRV_BLOCK_OFFSET_VALID);
3734 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3735 *pnum, pnum);
3738 if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3739 if (bdrv_unallocated_blocks_are_zero(bs)) {
3740 ret |= BDRV_BLOCK_ZERO;
3741 } else if (bs->backing_hd) {
3742 BlockDriverState *bs2 = bs->backing_hd;
3743 int64_t length2 = bdrv_getlength(bs2);
3744 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3745 ret |= BDRV_BLOCK_ZERO;
3750 if (bs->file &&
3751 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
3752 (ret & BDRV_BLOCK_OFFSET_VALID)) {
3753 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3754 *pnum, pnum);
3755 if (ret2 >= 0) {
3756 /* Ignore errors. This is just providing extra information, it
3757 * is useful but not necessary.
3759 ret |= (ret2 & BDRV_BLOCK_ZERO);
3763 return ret;
3766 /* Coroutine wrapper for bdrv_get_block_status() */
3767 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
3769 BdrvCoGetBlockStatusData *data = opaque;
3770 BlockDriverState *bs = data->bs;
3772 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
3773 data->pnum);
3774 data->done = true;
3778 * Synchronous wrapper around bdrv_co_get_block_status().
3780 * See bdrv_co_get_block_status() for details.
3782 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
3783 int nb_sectors, int *pnum)
3785 Coroutine *co;
3786 BdrvCoGetBlockStatusData data = {
3787 .bs = bs,
3788 .sector_num = sector_num,
3789 .nb_sectors = nb_sectors,
3790 .pnum = pnum,
3791 .done = false,
3794 if (qemu_in_coroutine()) {
3795 /* Fast-path if already in coroutine context */
3796 bdrv_get_block_status_co_entry(&data);
3797 } else {
3798 co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
3799 qemu_coroutine_enter(co, &data);
3800 while (!data.done) {
3801 qemu_aio_wait();
3804 return data.ret;
3807 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
3808 int nb_sectors, int *pnum)
3810 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
3811 if (ret < 0) {
3812 return ret;
3814 return
3815 (ret & BDRV_BLOCK_DATA) ||
3816 ((ret & BDRV_BLOCK_ZERO) && !bdrv_has_zero_init(bs));
3820 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3822 * Return true if the given sector is allocated in any image between
3823 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3824 * sector is allocated in any image of the chain. Return false otherwise.
3826 * 'pnum' is set to the number of sectors (including and immediately following
3827 * the specified sector) that are known to be in the same
3828 * allocated/unallocated state.
3831 int bdrv_is_allocated_above(BlockDriverState *top,
3832 BlockDriverState *base,
3833 int64_t sector_num,
3834 int nb_sectors, int *pnum)
3836 BlockDriverState *intermediate;
3837 int ret, n = nb_sectors;
3839 intermediate = top;
3840 while (intermediate && intermediate != base) {
3841 int pnum_inter;
3842 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
3843 &pnum_inter);
3844 if (ret < 0) {
3845 return ret;
3846 } else if (ret) {
3847 *pnum = pnum_inter;
3848 return 1;
3852 * [sector_num, nb_sectors] is unallocated on top but intermediate
3853 * might have
3855 * [sector_num+x, nr_sectors] allocated.
3857 if (n > pnum_inter &&
3858 (intermediate == top ||
3859 sector_num + pnum_inter < intermediate->total_sectors)) {
3860 n = pnum_inter;
3863 intermediate = intermediate->backing_hd;
3866 *pnum = n;
3867 return 0;
3870 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
3872 if (bs->backing_hd && bs->backing_hd->encrypted)
3873 return bs->backing_file;
3874 else if (bs->encrypted)
3875 return bs->filename;
3876 else
3877 return NULL;
3880 void bdrv_get_backing_filename(BlockDriverState *bs,
3881 char *filename, int filename_size)
3883 pstrcpy(filename, filename_size, bs->backing_file);
3886 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
3887 const uint8_t *buf, int nb_sectors)
3889 BlockDriver *drv = bs->drv;
3890 if (!drv)
3891 return -ENOMEDIUM;
3892 if (!drv->bdrv_write_compressed)
3893 return -ENOTSUP;
3894 if (bdrv_check_request(bs, sector_num, nb_sectors))
3895 return -EIO;
3897 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
3899 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
3902 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
3904 BlockDriver *drv = bs->drv;
3905 if (!drv)
3906 return -ENOMEDIUM;
3907 if (!drv->bdrv_get_info)
3908 return -ENOTSUP;
3909 memset(bdi, 0, sizeof(*bdi));
3910 return drv->bdrv_get_info(bs, bdi);
3913 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
3915 BlockDriver *drv = bs->drv;
3916 if (drv && drv->bdrv_get_specific_info) {
3917 return drv->bdrv_get_specific_info(bs);
3919 return NULL;
3922 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
3923 int64_t pos, int size)
3925 QEMUIOVector qiov;
3926 struct iovec iov = {
3927 .iov_base = (void *) buf,
3928 .iov_len = size,
3931 qemu_iovec_init_external(&qiov, &iov, 1);
3932 return bdrv_writev_vmstate(bs, &qiov, pos);
3935 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
3937 BlockDriver *drv = bs->drv;
3939 if (!drv) {
3940 return -ENOMEDIUM;
3941 } else if (drv->bdrv_save_vmstate) {
3942 return drv->bdrv_save_vmstate(bs, qiov, pos);
3943 } else if (bs->file) {
3944 return bdrv_writev_vmstate(bs->file, qiov, pos);
3947 return -ENOTSUP;
3950 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
3951 int64_t pos, int size)
3953 BlockDriver *drv = bs->drv;
3954 if (!drv)
3955 return -ENOMEDIUM;
3956 if (drv->bdrv_load_vmstate)
3957 return drv->bdrv_load_vmstate(bs, buf, pos, size);
3958 if (bs->file)
3959 return bdrv_load_vmstate(bs->file, buf, pos, size);
3960 return -ENOTSUP;
3963 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
3965 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
3966 return;
3969 bs->drv->bdrv_debug_event(bs, event);
3972 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
3973 const char *tag)
3975 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
3976 bs = bs->file;
3979 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
3980 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
3983 return -ENOTSUP;
3986 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
3988 while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
3989 bs = bs->file;
3992 if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
3993 return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
3996 return -ENOTSUP;
3999 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4001 while (bs && bs->drv && !bs->drv->bdrv_debug_resume) {
4002 bs = bs->file;
4005 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4006 return bs->drv->bdrv_debug_resume(bs, tag);
4009 return -ENOTSUP;
4012 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4014 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4015 bs = bs->file;
4018 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4019 return bs->drv->bdrv_debug_is_suspended(bs, tag);
4022 return false;
4025 int bdrv_is_snapshot(BlockDriverState *bs)
4027 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4030 /* backing_file can either be relative, or absolute, or a protocol. If it is
4031 * relative, it must be relative to the chain. So, passing in bs->filename
4032 * from a BDS as backing_file should not be done, as that may be relative to
4033 * the CWD rather than the chain. */
4034 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4035 const char *backing_file)
4037 char *filename_full = NULL;
4038 char *backing_file_full = NULL;
4039 char *filename_tmp = NULL;
4040 int is_protocol = 0;
4041 BlockDriverState *curr_bs = NULL;
4042 BlockDriverState *retval = NULL;
4044 if (!bs || !bs->drv || !backing_file) {
4045 return NULL;
4048 filename_full = g_malloc(PATH_MAX);
4049 backing_file_full = g_malloc(PATH_MAX);
4050 filename_tmp = g_malloc(PATH_MAX);
4052 is_protocol = path_has_protocol(backing_file);
4054 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4056 /* If either of the filename paths is actually a protocol, then
4057 * compare unmodified paths; otherwise make paths relative */
4058 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4059 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4060 retval = curr_bs->backing_hd;
4061 break;
4063 } else {
4064 /* If not an absolute filename path, make it relative to the current
4065 * image's filename path */
4066 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4067 backing_file);
4069 /* We are going to compare absolute pathnames */
4070 if (!realpath(filename_tmp, filename_full)) {
4071 continue;
4074 /* We need to make sure the backing filename we are comparing against
4075 * is relative to the current image filename (or absolute) */
4076 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4077 curr_bs->backing_file);
4079 if (!realpath(filename_tmp, backing_file_full)) {
4080 continue;
4083 if (strcmp(backing_file_full, filename_full) == 0) {
4084 retval = curr_bs->backing_hd;
4085 break;
4090 g_free(filename_full);
4091 g_free(backing_file_full);
4092 g_free(filename_tmp);
4093 return retval;
4096 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4098 if (!bs->drv) {
4099 return 0;
4102 if (!bs->backing_hd) {
4103 return 0;
4106 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4109 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
4111 BlockDriverState *curr_bs = NULL;
4113 if (!bs) {
4114 return NULL;
4117 curr_bs = bs;
4119 while (curr_bs->backing_hd) {
4120 curr_bs = curr_bs->backing_hd;
4122 return curr_bs;
4125 /**************************************************************/
4126 /* async I/Os */
4128 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4129 QEMUIOVector *qiov, int nb_sectors,
4130 BlockDriverCompletionFunc *cb, void *opaque)
4132 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4134 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4135 cb, opaque, false);
4138 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4139 QEMUIOVector *qiov, int nb_sectors,
4140 BlockDriverCompletionFunc *cb, void *opaque)
4142 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4144 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4145 cb, opaque, true);
4148 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4149 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4150 BlockDriverCompletionFunc *cb, void *opaque)
4152 trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4154 return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4155 BDRV_REQ_ZERO_WRITE | flags,
4156 cb, opaque, true);
4160 typedef struct MultiwriteCB {
4161 int error;
4162 int num_requests;
4163 int num_callbacks;
4164 struct {
4165 BlockDriverCompletionFunc *cb;
4166 void *opaque;
4167 QEMUIOVector *free_qiov;
4168 } callbacks[];
4169 } MultiwriteCB;
4171 static void multiwrite_user_cb(MultiwriteCB *mcb)
4173 int i;
4175 for (i = 0; i < mcb->num_callbacks; i++) {
4176 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4177 if (mcb->callbacks[i].free_qiov) {
4178 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4180 g_free(mcb->callbacks[i].free_qiov);
4184 static void multiwrite_cb(void *opaque, int ret)
4186 MultiwriteCB *mcb = opaque;
4188 trace_multiwrite_cb(mcb, ret);
4190 if (ret < 0 && !mcb->error) {
4191 mcb->error = ret;
4194 mcb->num_requests--;
4195 if (mcb->num_requests == 0) {
4196 multiwrite_user_cb(mcb);
4197 g_free(mcb);
4201 static int multiwrite_req_compare(const void *a, const void *b)
4203 const BlockRequest *req1 = a, *req2 = b;
4206 * Note that we can't simply subtract req2->sector from req1->sector
4207 * here as that could overflow the return value.
4209 if (req1->sector > req2->sector) {
4210 return 1;
4211 } else if (req1->sector < req2->sector) {
4212 return -1;
4213 } else {
4214 return 0;
4219 * Takes a bunch of requests and tries to merge them. Returns the number of
4220 * requests that remain after merging.
4222 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4223 int num_reqs, MultiwriteCB *mcb)
4225 int i, outidx;
4227 // Sort requests by start sector
4228 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4230 // Check if adjacent requests touch the same clusters. If so, combine them,
4231 // filling up gaps with zero sectors.
4232 outidx = 0;
4233 for (i = 1; i < num_reqs; i++) {
4234 int merge = 0;
4235 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4237 // Handle exactly sequential writes and overlapping writes.
4238 if (reqs[i].sector <= oldreq_last) {
4239 merge = 1;
4242 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4243 merge = 0;
4246 if (merge) {
4247 size_t size;
4248 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4249 qemu_iovec_init(qiov,
4250 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4252 // Add the first request to the merged one. If the requests are
4253 // overlapping, drop the last sectors of the first request.
4254 size = (reqs[i].sector - reqs[outidx].sector) << 9;
4255 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4257 // We should need to add any zeros between the two requests
4258 assert (reqs[i].sector <= oldreq_last);
4260 // Add the second request
4261 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4263 reqs[outidx].nb_sectors = qiov->size >> 9;
4264 reqs[outidx].qiov = qiov;
4266 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4267 } else {
4268 outidx++;
4269 reqs[outidx].sector = reqs[i].sector;
4270 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4271 reqs[outidx].qiov = reqs[i].qiov;
4275 return outidx + 1;
4279 * Submit multiple AIO write requests at once.
4281 * On success, the function returns 0 and all requests in the reqs array have
4282 * been submitted. In error case this function returns -1, and any of the
4283 * requests may or may not be submitted yet. In particular, this means that the
4284 * callback will be called for some of the requests, for others it won't. The
4285 * caller must check the error field of the BlockRequest to wait for the right
4286 * callbacks (if error != 0, no callback will be called).
4288 * The implementation may modify the contents of the reqs array, e.g. to merge
4289 * requests. However, the fields opaque and error are left unmodified as they
4290 * are used to signal failure for a single request to the caller.
4292 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4294 MultiwriteCB *mcb;
4295 int i;
4297 /* don't submit writes if we don't have a medium */
4298 if (bs->drv == NULL) {
4299 for (i = 0; i < num_reqs; i++) {
4300 reqs[i].error = -ENOMEDIUM;
4302 return -1;
4305 if (num_reqs == 0) {
4306 return 0;
4309 // Create MultiwriteCB structure
4310 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4311 mcb->num_requests = 0;
4312 mcb->num_callbacks = num_reqs;
4314 for (i = 0; i < num_reqs; i++) {
4315 mcb->callbacks[i].cb = reqs[i].cb;
4316 mcb->callbacks[i].opaque = reqs[i].opaque;
4319 // Check for mergable requests
4320 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4322 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4324 /* Run the aio requests. */
4325 mcb->num_requests = num_reqs;
4326 for (i = 0; i < num_reqs; i++) {
4327 bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4328 reqs[i].nb_sectors, reqs[i].flags,
4329 multiwrite_cb, mcb,
4330 true);
4333 return 0;
4336 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4338 acb->aiocb_info->cancel(acb);
4341 /**************************************************************/
4342 /* async block device emulation */
4344 typedef struct BlockDriverAIOCBSync {
4345 BlockDriverAIOCB common;
4346 QEMUBH *bh;
4347 int ret;
4348 /* vector translation state */
4349 QEMUIOVector *qiov;
4350 uint8_t *bounce;
4351 int is_write;
4352 } BlockDriverAIOCBSync;
4354 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4356 BlockDriverAIOCBSync *acb =
4357 container_of(blockacb, BlockDriverAIOCBSync, common);
4358 qemu_bh_delete(acb->bh);
4359 acb->bh = NULL;
4360 qemu_aio_release(acb);
4363 static const AIOCBInfo bdrv_em_aiocb_info = {
4364 .aiocb_size = sizeof(BlockDriverAIOCBSync),
4365 .cancel = bdrv_aio_cancel_em,
4368 static void bdrv_aio_bh_cb(void *opaque)
4370 BlockDriverAIOCBSync *acb = opaque;
4372 if (!acb->is_write)
4373 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4374 qemu_vfree(acb->bounce);
4375 acb->common.cb(acb->common.opaque, acb->ret);
4376 qemu_bh_delete(acb->bh);
4377 acb->bh = NULL;
4378 qemu_aio_release(acb);
4381 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4382 int64_t sector_num,
4383 QEMUIOVector *qiov,
4384 int nb_sectors,
4385 BlockDriverCompletionFunc *cb,
4386 void *opaque,
4387 int is_write)
4390 BlockDriverAIOCBSync *acb;
4392 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4393 acb->is_write = is_write;
4394 acb->qiov = qiov;
4395 acb->bounce = qemu_blockalign(bs, qiov->size);
4396 acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
4398 if (is_write) {
4399 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4400 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4401 } else {
4402 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4405 qemu_bh_schedule(acb->bh);
4407 return &acb->common;
4410 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4411 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4412 BlockDriverCompletionFunc *cb, void *opaque)
4414 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4417 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4418 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4419 BlockDriverCompletionFunc *cb, void *opaque)
4421 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4425 typedef struct BlockDriverAIOCBCoroutine {
4426 BlockDriverAIOCB common;
4427 BlockRequest req;
4428 bool is_write;
4429 bool *done;
4430 QEMUBH* bh;
4431 } BlockDriverAIOCBCoroutine;
4433 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4435 BlockDriverAIOCBCoroutine *acb =
4436 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4437 bool done = false;
4439 acb->done = &done;
4440 while (!done) {
4441 qemu_aio_wait();
4445 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4446 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
4447 .cancel = bdrv_aio_co_cancel_em,
4450 static void bdrv_co_em_bh(void *opaque)
4452 BlockDriverAIOCBCoroutine *acb = opaque;
4454 acb->common.cb(acb->common.opaque, acb->req.error);
4456 if (acb->done) {
4457 *acb->done = true;
4460 qemu_bh_delete(acb->bh);
4461 qemu_aio_release(acb);
4464 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4465 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4467 BlockDriverAIOCBCoroutine *acb = opaque;
4468 BlockDriverState *bs = acb->common.bs;
4470 if (!acb->is_write) {
4471 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4472 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4473 } else {
4474 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4475 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4478 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4479 qemu_bh_schedule(acb->bh);
4482 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4483 int64_t sector_num,
4484 QEMUIOVector *qiov,
4485 int nb_sectors,
4486 BdrvRequestFlags flags,
4487 BlockDriverCompletionFunc *cb,
4488 void *opaque,
4489 bool is_write)
4491 Coroutine *co;
4492 BlockDriverAIOCBCoroutine *acb;
4494 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4495 acb->req.sector = sector_num;
4496 acb->req.nb_sectors = nb_sectors;
4497 acb->req.qiov = qiov;
4498 acb->req.flags = flags;
4499 acb->is_write = is_write;
4500 acb->done = NULL;
4502 co = qemu_coroutine_create(bdrv_co_do_rw);
4503 qemu_coroutine_enter(co, acb);
4505 return &acb->common;
4508 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4510 BlockDriverAIOCBCoroutine *acb = opaque;
4511 BlockDriverState *bs = acb->common.bs;
4513 acb->req.error = bdrv_co_flush(bs);
4514 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4515 qemu_bh_schedule(acb->bh);
4518 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4519 BlockDriverCompletionFunc *cb, void *opaque)
4521 trace_bdrv_aio_flush(bs, opaque);
4523 Coroutine *co;
4524 BlockDriverAIOCBCoroutine *acb;
4526 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4527 acb->done = NULL;
4529 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4530 qemu_coroutine_enter(co, acb);
4532 return &acb->common;
4535 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4537 BlockDriverAIOCBCoroutine *acb = opaque;
4538 BlockDriverState *bs = acb->common.bs;
4540 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4541 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4542 qemu_bh_schedule(acb->bh);
4545 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4546 int64_t sector_num, int nb_sectors,
4547 BlockDriverCompletionFunc *cb, void *opaque)
4549 Coroutine *co;
4550 BlockDriverAIOCBCoroutine *acb;
4552 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4554 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4555 acb->req.sector = sector_num;
4556 acb->req.nb_sectors = nb_sectors;
4557 acb->done = NULL;
4558 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4559 qemu_coroutine_enter(co, acb);
4561 return &acb->common;
4564 void bdrv_init(void)
4566 module_call_init(MODULE_INIT_BLOCK);
4569 void bdrv_init_with_whitelist(void)
4571 use_bdrv_whitelist = 1;
4572 bdrv_init();
4575 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4576 BlockDriverCompletionFunc *cb, void *opaque)
4578 BlockDriverAIOCB *acb;
4580 acb = g_slice_alloc(aiocb_info->aiocb_size);
4581 acb->aiocb_info = aiocb_info;
4582 acb->bs = bs;
4583 acb->cb = cb;
4584 acb->opaque = opaque;
4585 return acb;
4588 void qemu_aio_release(void *p)
4590 BlockDriverAIOCB *acb = p;
4591 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4594 /**************************************************************/
4595 /* Coroutine block device emulation */
4597 typedef struct CoroutineIOCompletion {
4598 Coroutine *coroutine;
4599 int ret;
4600 } CoroutineIOCompletion;
4602 static void bdrv_co_io_em_complete(void *opaque, int ret)
4604 CoroutineIOCompletion *co = opaque;
4606 co->ret = ret;
4607 qemu_coroutine_enter(co->coroutine, NULL);
4610 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4611 int nb_sectors, QEMUIOVector *iov,
4612 bool is_write)
4614 CoroutineIOCompletion co = {
4615 .coroutine = qemu_coroutine_self(),
4617 BlockDriverAIOCB *acb;
4619 if (is_write) {
4620 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4621 bdrv_co_io_em_complete, &co);
4622 } else {
4623 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4624 bdrv_co_io_em_complete, &co);
4627 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4628 if (!acb) {
4629 return -EIO;
4631 qemu_coroutine_yield();
4633 return co.ret;
4636 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4637 int64_t sector_num, int nb_sectors,
4638 QEMUIOVector *iov)
4640 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4643 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4644 int64_t sector_num, int nb_sectors,
4645 QEMUIOVector *iov)
4647 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4650 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4652 RwCo *rwco = opaque;
4654 rwco->ret = bdrv_co_flush(rwco->bs);
4657 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4659 int ret;
4661 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4662 return 0;
4665 /* Write back cached data to the OS even with cache=unsafe */
4666 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4667 if (bs->drv->bdrv_co_flush_to_os) {
4668 ret = bs->drv->bdrv_co_flush_to_os(bs);
4669 if (ret < 0) {
4670 return ret;
4674 /* But don't actually force it to the disk with cache=unsafe */
4675 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4676 goto flush_parent;
4679 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4680 if (bs->drv->bdrv_co_flush_to_disk) {
4681 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4682 } else if (bs->drv->bdrv_aio_flush) {
4683 BlockDriverAIOCB *acb;
4684 CoroutineIOCompletion co = {
4685 .coroutine = qemu_coroutine_self(),
4688 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4689 if (acb == NULL) {
4690 ret = -EIO;
4691 } else {
4692 qemu_coroutine_yield();
4693 ret = co.ret;
4695 } else {
4697 * Some block drivers always operate in either writethrough or unsafe
4698 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4699 * know how the server works (because the behaviour is hardcoded or
4700 * depends on server-side configuration), so we can't ensure that
4701 * everything is safe on disk. Returning an error doesn't work because
4702 * that would break guests even if the server operates in writethrough
4703 * mode.
4705 * Let's hope the user knows what he's doing.
4707 ret = 0;
4709 if (ret < 0) {
4710 return ret;
4713 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4714 * in the case of cache=unsafe, so there are no useless flushes.
4716 flush_parent:
4717 return bdrv_co_flush(bs->file);
4720 void bdrv_invalidate_cache(BlockDriverState *bs)
4722 if (bs->drv && bs->drv->bdrv_invalidate_cache) {
4723 bs->drv->bdrv_invalidate_cache(bs);
4727 void bdrv_invalidate_cache_all(void)
4729 BlockDriverState *bs;
4731 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4732 bdrv_invalidate_cache(bs);
4736 void bdrv_clear_incoming_migration_all(void)
4738 BlockDriverState *bs;
4740 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4741 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4745 int bdrv_flush(BlockDriverState *bs)
4747 Coroutine *co;
4748 RwCo rwco = {
4749 .bs = bs,
4750 .ret = NOT_DONE,
4753 if (qemu_in_coroutine()) {
4754 /* Fast-path if already in coroutine context */
4755 bdrv_flush_co_entry(&rwco);
4756 } else {
4757 co = qemu_coroutine_create(bdrv_flush_co_entry);
4758 qemu_coroutine_enter(co, &rwco);
4759 while (rwco.ret == NOT_DONE) {
4760 qemu_aio_wait();
4764 return rwco.ret;
4767 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
4769 RwCo *rwco = opaque;
4771 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
4774 /* if no limit is specified in the BlockLimits use a default
4775 * of 32768 512-byte sectors (16 MiB) per request.
4777 #define MAX_DISCARD_DEFAULT 32768
4779 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
4780 int nb_sectors)
4782 int max_discard;
4784 if (!bs->drv) {
4785 return -ENOMEDIUM;
4786 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
4787 return -EIO;
4788 } else if (bs->read_only) {
4789 return -EROFS;
4792 bdrv_reset_dirty(bs, sector_num, nb_sectors);
4794 /* Do nothing if disabled. */
4795 if (!(bs->open_flags & BDRV_O_UNMAP)) {
4796 return 0;
4799 if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
4800 return 0;
4803 max_discard = bs->bl.max_discard ? bs->bl.max_discard : MAX_DISCARD_DEFAULT;
4804 while (nb_sectors > 0) {
4805 int ret;
4806 int num = nb_sectors;
4808 /* align request */
4809 if (bs->bl.discard_alignment &&
4810 num >= bs->bl.discard_alignment &&
4811 sector_num % bs->bl.discard_alignment) {
4812 if (num > bs->bl.discard_alignment) {
4813 num = bs->bl.discard_alignment;
4815 num -= sector_num % bs->bl.discard_alignment;
4818 /* limit request size */
4819 if (num > max_discard) {
4820 num = max_discard;
4823 if (bs->drv->bdrv_co_discard) {
4824 ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
4825 } else {
4826 BlockDriverAIOCB *acb;
4827 CoroutineIOCompletion co = {
4828 .coroutine = qemu_coroutine_self(),
4831 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
4832 bdrv_co_io_em_complete, &co);
4833 if (acb == NULL) {
4834 return -EIO;
4835 } else {
4836 qemu_coroutine_yield();
4837 ret = co.ret;
4840 if (ret && ret != -ENOTSUP) {
4841 return ret;
4844 sector_num += num;
4845 nb_sectors -= num;
4847 return 0;
4850 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
4852 Coroutine *co;
4853 RwCo rwco = {
4854 .bs = bs,
4855 .sector_num = sector_num,
4856 .nb_sectors = nb_sectors,
4857 .ret = NOT_DONE,
4860 if (qemu_in_coroutine()) {
4861 /* Fast-path if already in coroutine context */
4862 bdrv_discard_co_entry(&rwco);
4863 } else {
4864 co = qemu_coroutine_create(bdrv_discard_co_entry);
4865 qemu_coroutine_enter(co, &rwco);
4866 while (rwco.ret == NOT_DONE) {
4867 qemu_aio_wait();
4871 return rwco.ret;
4874 /**************************************************************/
4875 /* removable device support */
4878 * Return TRUE if the media is present
4880 int bdrv_is_inserted(BlockDriverState *bs)
4882 BlockDriver *drv = bs->drv;
4884 if (!drv)
4885 return 0;
4886 if (!drv->bdrv_is_inserted)
4887 return 1;
4888 return drv->bdrv_is_inserted(bs);
4892 * Return whether the media changed since the last call to this
4893 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4895 int bdrv_media_changed(BlockDriverState *bs)
4897 BlockDriver *drv = bs->drv;
4899 if (drv && drv->bdrv_media_changed) {
4900 return drv->bdrv_media_changed(bs);
4902 return -ENOTSUP;
4906 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4908 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
4910 BlockDriver *drv = bs->drv;
4912 if (drv && drv->bdrv_eject) {
4913 drv->bdrv_eject(bs, eject_flag);
4916 if (bs->device_name[0] != '\0') {
4917 bdrv_emit_qmp_eject_event(bs, eject_flag);
4922 * Lock or unlock the media (if it is locked, the user won't be able
4923 * to eject it manually).
4925 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
4927 BlockDriver *drv = bs->drv;
4929 trace_bdrv_lock_medium(bs, locked);
4931 if (drv && drv->bdrv_lock_medium) {
4932 drv->bdrv_lock_medium(bs, locked);
4936 /* needed for generic scsi interface */
4938 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
4940 BlockDriver *drv = bs->drv;
4942 if (drv && drv->bdrv_ioctl)
4943 return drv->bdrv_ioctl(bs, req, buf);
4944 return -ENOTSUP;
4947 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
4948 unsigned long int req, void *buf,
4949 BlockDriverCompletionFunc *cb, void *opaque)
4951 BlockDriver *drv = bs->drv;
4953 if (drv && drv->bdrv_aio_ioctl)
4954 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
4955 return NULL;
4958 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
4960 bs->guest_block_size = align;
4963 void *qemu_blockalign(BlockDriverState *bs, size_t size)
4965 return qemu_memalign(bdrv_opt_mem_align(bs), size);
4969 * Check if all memory in this vector is sector aligned.
4971 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
4973 int i;
4974 size_t alignment = bdrv_opt_mem_align(bs);
4976 for (i = 0; i < qiov->niov; i++) {
4977 if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
4978 return false;
4980 if (qiov->iov[i].iov_len % alignment) {
4981 return false;
4985 return true;
4988 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity)
4990 int64_t bitmap_size;
4991 BdrvDirtyBitmap *bitmap;
4993 assert((granularity & (granularity - 1)) == 0);
4995 granularity >>= BDRV_SECTOR_BITS;
4996 assert(granularity);
4997 bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS);
4998 bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
4999 bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5000 QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5001 return bitmap;
5004 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5006 BdrvDirtyBitmap *bm, *next;
5007 QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5008 if (bm == bitmap) {
5009 QLIST_REMOVE(bitmap, list);
5010 hbitmap_free(bitmap->bitmap);
5011 g_free(bitmap);
5012 return;
5017 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5019 BdrvDirtyBitmap *bm;
5020 BlockDirtyInfoList *list = NULL;
5021 BlockDirtyInfoList **plist = &list;
5023 QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5024 BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5025 BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5026 info->count = bdrv_get_dirty_count(bs, bm);
5027 info->granularity =
5028 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5029 entry->value = info;
5030 *plist = entry;
5031 plist = &entry->next;
5034 return list;
5037 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5039 if (bitmap) {
5040 return hbitmap_get(bitmap->bitmap, sector);
5041 } else {
5042 return 0;
5046 void bdrv_dirty_iter_init(BlockDriverState *bs,
5047 BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5049 hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5052 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5053 int nr_sectors)
5055 BdrvDirtyBitmap *bitmap;
5056 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5057 hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5061 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5063 BdrvDirtyBitmap *bitmap;
5064 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5065 hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5069 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5071 return hbitmap_count(bitmap->bitmap);
5074 /* Get a reference to bs */
5075 void bdrv_ref(BlockDriverState *bs)
5077 bs->refcnt++;
5080 /* Release a previously grabbed reference to bs.
5081 * If after releasing, reference count is zero, the BlockDriverState is
5082 * deleted. */
5083 void bdrv_unref(BlockDriverState *bs)
5085 assert(bs->refcnt > 0);
5086 if (--bs->refcnt == 0) {
5087 bdrv_delete(bs);
5091 void bdrv_set_in_use(BlockDriverState *bs, int in_use)
5093 assert(bs->in_use != in_use);
5094 bs->in_use = in_use;
5097 int bdrv_in_use(BlockDriverState *bs)
5099 return bs->in_use;
5102 void bdrv_iostatus_enable(BlockDriverState *bs)
5104 bs->iostatus_enabled = true;
5105 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5108 /* The I/O status is only enabled if the drive explicitly
5109 * enables it _and_ the VM is configured to stop on errors */
5110 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5112 return (bs->iostatus_enabled &&
5113 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5114 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
5115 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5118 void bdrv_iostatus_disable(BlockDriverState *bs)
5120 bs->iostatus_enabled = false;
5123 void bdrv_iostatus_reset(BlockDriverState *bs)
5125 if (bdrv_iostatus_is_enabled(bs)) {
5126 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5127 if (bs->job) {
5128 block_job_iostatus_reset(bs->job);
5133 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5135 assert(bdrv_iostatus_is_enabled(bs));
5136 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5137 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5138 BLOCK_DEVICE_IO_STATUS_FAILED;
5142 void
5143 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5144 enum BlockAcctType type)
5146 assert(type < BDRV_MAX_IOTYPE);
5148 cookie->bytes = bytes;
5149 cookie->start_time_ns = get_clock();
5150 cookie->type = type;
5153 void
5154 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5156 assert(cookie->type < BDRV_MAX_IOTYPE);
5158 bs->nr_bytes[cookie->type] += cookie->bytes;
5159 bs->nr_ops[cookie->type]++;
5160 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5163 void bdrv_img_create(const char *filename, const char *fmt,
5164 const char *base_filename, const char *base_fmt,
5165 char *options, uint64_t img_size, int flags,
5166 Error **errp, bool quiet)
5168 QEMUOptionParameter *param = NULL, *create_options = NULL;
5169 QEMUOptionParameter *backing_fmt, *backing_file, *size;
5170 BlockDriver *drv, *proto_drv;
5171 BlockDriver *backing_drv = NULL;
5172 Error *local_err = NULL;
5173 int ret = 0;
5175 /* Find driver and parse its options */
5176 drv = bdrv_find_format(fmt);
5177 if (!drv) {
5178 error_setg(errp, "Unknown file format '%s'", fmt);
5179 return;
5182 proto_drv = bdrv_find_protocol(filename, true);
5183 if (!proto_drv) {
5184 error_setg(errp, "Unknown protocol '%s'", filename);
5185 return;
5188 create_options = append_option_parameters(create_options,
5189 drv->create_options);
5190 create_options = append_option_parameters(create_options,
5191 proto_drv->create_options);
5193 /* Create parameter list with default values */
5194 param = parse_option_parameters("", create_options, param);
5196 set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size);
5198 /* Parse -o options */
5199 if (options) {
5200 param = parse_option_parameters(options, create_options, param);
5201 if (param == NULL) {
5202 error_setg(errp, "Invalid options for file format '%s'.", fmt);
5203 goto out;
5207 if (base_filename) {
5208 if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE,
5209 base_filename)) {
5210 error_setg(errp, "Backing file not supported for file format '%s'",
5211 fmt);
5212 goto out;
5216 if (base_fmt) {
5217 if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5218 error_setg(errp, "Backing file format not supported for file "
5219 "format '%s'", fmt);
5220 goto out;
5224 backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE);
5225 if (backing_file && backing_file->value.s) {
5226 if (!strcmp(filename, backing_file->value.s)) {
5227 error_setg(errp, "Error: Trying to create an image with the "
5228 "same filename as the backing file");
5229 goto out;
5233 backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT);
5234 if (backing_fmt && backing_fmt->value.s) {
5235 backing_drv = bdrv_find_format(backing_fmt->value.s);
5236 if (!backing_drv) {
5237 error_setg(errp, "Unknown backing file format '%s'",
5238 backing_fmt->value.s);
5239 goto out;
5243 // The size for the image must always be specified, with one exception:
5244 // If we are using a backing file, we can obtain the size from there
5245 size = get_option_parameter(param, BLOCK_OPT_SIZE);
5246 if (size && size->value.n == -1) {
5247 if (backing_file && backing_file->value.s) {
5248 BlockDriverState *bs;
5249 uint64_t size;
5250 char buf[32];
5251 int back_flags;
5253 /* backing files always opened read-only */
5254 back_flags =
5255 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5257 bs = bdrv_new("");
5259 ret = bdrv_open(bs, backing_file->value.s, NULL, back_flags,
5260 backing_drv, &local_err);
5261 if (ret < 0) {
5262 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5263 backing_file->value.s,
5264 error_get_pretty(local_err));
5265 error_free(local_err);
5266 local_err = NULL;
5267 bdrv_unref(bs);
5268 goto out;
5270 bdrv_get_geometry(bs, &size);
5271 size *= 512;
5273 snprintf(buf, sizeof(buf), "%" PRId64, size);
5274 set_option_parameter(param, BLOCK_OPT_SIZE, buf);
5276 bdrv_unref(bs);
5277 } else {
5278 error_setg(errp, "Image creation needs a size parameter");
5279 goto out;
5283 if (!quiet) {
5284 printf("Formatting '%s', fmt=%s ", filename, fmt);
5285 print_option_parameters(param);
5286 puts("");
5288 ret = bdrv_create(drv, filename, param, &local_err);
5289 if (ret == -EFBIG) {
5290 /* This is generally a better message than whatever the driver would
5291 * deliver (especially because of the cluster_size_hint), since that
5292 * is most probably not much different from "image too large". */
5293 const char *cluster_size_hint = "";
5294 if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) {
5295 cluster_size_hint = " (try using a larger cluster size)";
5297 error_setg(errp, "The image size is too large for file format '%s'"
5298 "%s", fmt, cluster_size_hint);
5299 error_free(local_err);
5300 local_err = NULL;
5303 out:
5304 free_option_parameters(create_options);
5305 free_option_parameters(param);
5307 if (error_is_set(&local_err)) {
5308 error_propagate(errp, local_err);
5312 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5314 /* Currently BlockDriverState always uses the main loop AioContext */
5315 return qemu_get_aio_context();
5318 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5319 NotifierWithReturn *notifier)
5321 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5324 int bdrv_amend_options(BlockDriverState *bs, QEMUOptionParameter *options)
5326 if (bs->drv->bdrv_amend_options == NULL) {
5327 return -ENOTSUP;
5329 return bs->drv->bdrv_amend_options(bs, options);
5332 /* Used to recurse on single child block filters.
5333 * Single child block filter will store their child in bs->file.
5335 bool bdrv_generic_is_first_non_filter(BlockDriverState *bs,
5336 BlockDriverState *candidate)
5338 if (!bs->drv) {
5339 return false;
5342 if (!bs->drv->authorizations[BS_IS_A_FILTER]) {
5343 if (bs == candidate) {
5344 return true;
5345 } else {
5346 return false;
5350 if (!bs->drv->authorizations[BS_FILTER_PASS_DOWN]) {
5351 return false;
5354 if (!bs->file) {
5355 return false;
5358 return bdrv_recurse_is_first_non_filter(bs->file, candidate);
5361 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5362 BlockDriverState *candidate)
5364 if (bs->drv && bs->drv->bdrv_recurse_is_first_non_filter) {
5365 return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5368 return bdrv_generic_is_first_non_filter(bs, candidate);
5371 /* This function checks if the candidate is the first non filter bs down it's
5372 * bs chain. Since we don't have pointers to parents it explore all bs chains
5373 * from the top. Some filters can choose not to pass down the recursion.
5375 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5377 BlockDriverState *bs;
5379 /* walk down the bs forest recursively */
5380 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5381 bool perm;
5383 if (!bs->file) {
5384 continue;
5387 perm = bdrv_recurse_is_first_non_filter(bs->file, candidate);
5389 /* candidate is the first non filter */
5390 if (perm) {
5391 return true;
5395 return false;