hw/misc/zynq_slcr.c

   1 /*
   2  * Status and system control registers for Xilinx Zynq Platform
   3  *
   4  * Copyright (c) 2011 Michal Simek <monstr@monstr.eu>
   5  * Copyright (c) 2012 PetaLogix Pty Ltd.
   6  * Based on hw/arm_sysctl.c, written by Paul Brook
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * as published by the Free Software Foundation; either version
  11  * 2 of the License, or (at your option) any later version.
  12  *
  13  * You should have received a copy of the GNU General Public License along
  14  * with this program; if not, see <http://www.gnu.org/licenses/>.
  15  */
  16
  17 #include "qemu/osdep.h"
  18 #include "qemu/timer.h"
  19 #include "sysemu/runstate.h"
  20 #include "hw/sysbus.h"
  21 #include "migration/vmstate.h"
  22 #include "qemu/log.h"
  23 #include "qemu/module.h"
  24 #include "hw/registerfields.h"
  25 #include "hw/qdev-clock.h"
  26 #include "qom/object.h"
  27
  28 #ifndef ZYNQ_SLCR_ERR_DEBUG
  29 #define ZYNQ_SLCR_ERR_DEBUG 0
  30 #endif
  31
  32 #define DB_PRINT(...) do { \
  33         if (ZYNQ_SLCR_ERR_DEBUG) { \
  34             fprintf(stderr,  ": %s: ", __func__); \
  35             fprintf(stderr, ## __VA_ARGS__); \
  36         } \
  37     } while (0)
  38
  39 #define XILINX_LOCK_KEY 0x767b
  40 #define XILINX_UNLOCK_KEY 0xdf0d
  41
  42 REG32(SCL, 0x000)
  43 REG32(LOCK, 0x004)
  44 REG32(UNLOCK, 0x008)
  45 REG32(LOCKSTA, 0x00c)
  46
  47 REG32(ARM_PLL_CTRL, 0x100)
  48 REG32(DDR_PLL_CTRL, 0x104)
  49 REG32(IO_PLL_CTRL, 0x108)
  50 /* fields for [ARM|DDR|IO]_PLL_CTRL registers */
  51     FIELD(xxx_PLL_CTRL, PLL_RESET, 0, 1)
  52     FIELD(xxx_PLL_CTRL, PLL_PWRDWN, 1, 1)
  53     FIELD(xxx_PLL_CTRL, PLL_BYPASS_QUAL, 3, 1)
  54     FIELD(xxx_PLL_CTRL, PLL_BYPASS_FORCE, 4, 1)
  55     FIELD(xxx_PLL_CTRL, PLL_FPDIV, 12, 7)
  56 REG32(PLL_STATUS, 0x10c)
  57 REG32(ARM_PLL_CFG, 0x110)
  58 REG32(DDR_PLL_CFG, 0x114)
  59 REG32(IO_PLL_CFG, 0x118)
  60
  61 REG32(ARM_CLK_CTRL, 0x120)
  62 REG32(DDR_CLK_CTRL, 0x124)
  63 REG32(DCI_CLK_CTRL, 0x128)
  64 REG32(APER_CLK_CTRL, 0x12c)
  65 REG32(USB0_CLK_CTRL, 0x130)
  66 REG32(USB1_CLK_CTRL, 0x134)
  67 REG32(GEM0_RCLK_CTRL, 0x138)
  68 REG32(GEM1_RCLK_CTRL, 0x13c)
  69 REG32(GEM0_CLK_CTRL, 0x140)
  70 REG32(GEM1_CLK_CTRL, 0x144)
  71 REG32(SMC_CLK_CTRL, 0x148)
  72 REG32(LQSPI_CLK_CTRL, 0x14c)
  73 REG32(SDIO_CLK_CTRL, 0x150)
  74 REG32(UART_CLK_CTRL, 0x154)
  75     FIELD(UART_CLK_CTRL, CLKACT0, 0, 1)
  76     FIELD(UART_CLK_CTRL, CLKACT1, 1, 1)
  77     FIELD(UART_CLK_CTRL, SRCSEL,  4, 2)
  78     FIELD(UART_CLK_CTRL, DIVISOR, 8, 6)
  79 REG32(SPI_CLK_CTRL, 0x158)
  80 REG32(CAN_CLK_CTRL, 0x15c)
  81 REG32(CAN_MIOCLK_CTRL, 0x160)
  82 REG32(DBG_CLK_CTRL, 0x164)
  83 REG32(PCAP_CLK_CTRL, 0x168)
  84 REG32(TOPSW_CLK_CTRL, 0x16c)
  85
  86 #define FPGA_CTRL_REGS(n, start) \
  87     REG32(FPGA ## n ## _CLK_CTRL, (start)) \
  88     REG32(FPGA ## n ## _THR_CTRL, (start) + 0x4)\
  89     REG32(FPGA ## n ## _THR_CNT,  (start) + 0x8)\
  90     REG32(FPGA ## n ## _THR_STA,  (start) + 0xc)
  91 FPGA_CTRL_REGS(0, 0x170)
  92 FPGA_CTRL_REGS(1, 0x180)
  93 FPGA_CTRL_REGS(2, 0x190)
  94 FPGA_CTRL_REGS(3, 0x1a0)
  95
  96 REG32(BANDGAP_TRIP, 0x1b8)
  97 REG32(PLL_PREDIVISOR, 0x1c0)
  98 REG32(CLK_621_TRUE, 0x1c4)
  99
 100 REG32(PSS_RST_CTRL, 0x200)
 101     FIELD(PSS_RST_CTRL, SOFT_RST, 0, 1)
 102 REG32(DDR_RST_CTRL, 0x204)
 103 REG32(TOPSW_RESET_CTRL, 0x208)
 104 REG32(DMAC_RST_CTRL, 0x20c)
 105 REG32(USB_RST_CTRL, 0x210)
 106 REG32(GEM_RST_CTRL, 0x214)
 107 REG32(SDIO_RST_CTRL, 0x218)
 108 REG32(SPI_RST_CTRL, 0x21c)
 109 REG32(CAN_RST_CTRL, 0x220)
 110 REG32(I2C_RST_CTRL, 0x224)
 111 REG32(UART_RST_CTRL, 0x228)
 112 REG32(GPIO_RST_CTRL, 0x22c)
 113 REG32(LQSPI_RST_CTRL, 0x230)
 114 REG32(SMC_RST_CTRL, 0x234)
 115 REG32(OCM_RST_CTRL, 0x238)
 116 REG32(FPGA_RST_CTRL, 0x240)
 117 REG32(A9_CPU_RST_CTRL, 0x244)
 118
 119 REG32(RS_AWDT_CTRL, 0x24c)
 120 REG32(RST_REASON, 0x250)
 121
 122 REG32(REBOOT_STATUS, 0x258)
 123 REG32(BOOT_MODE, 0x25c)
 124
 125 REG32(APU_CTRL, 0x300)
 126 REG32(WDT_CLK_SEL, 0x304)
 127
 128 REG32(TZ_DMA_NS, 0x440)
 129 REG32(TZ_DMA_IRQ_NS, 0x444)
 130 REG32(TZ_DMA_PERIPH_NS, 0x448)
 131
 132 REG32(PSS_IDCODE, 0x530)
 133
 134 REG32(DDR_URGENT, 0x600)
 135 REG32(DDR_CAL_START, 0x60c)
 136 REG32(DDR_REF_START, 0x614)
 137 REG32(DDR_CMD_STA, 0x618)
 138 REG32(DDR_URGENT_SEL, 0x61c)
 139 REG32(DDR_DFI_STATUS, 0x620)
 140
 141 REG32(MIO, 0x700)
 142 #define MIO_LENGTH 54
 143
 144 REG32(MIO_LOOPBACK, 0x804)
 145 REG32(MIO_MST_TRI0, 0x808)
 146 REG32(MIO_MST_TRI1, 0x80c)
 147
 148 REG32(SD0_WP_CD_SEL, 0x830)
 149 REG32(SD1_WP_CD_SEL, 0x834)
 150
 151 REG32(LVL_SHFTR_EN, 0x900)
 152 REG32(OCM_CFG, 0x910)
 153
 154 REG32(CPU_RAM, 0xa00)
 155
 156 REG32(IOU, 0xa30)
 157
 158 REG32(DMAC_RAM, 0xa50)
 159
 160 REG32(AFI0, 0xa60)
 161 REG32(AFI1, 0xa6c)
 162 REG32(AFI2, 0xa78)
 163 REG32(AFI3, 0xa84)
 164 #define AFI_LENGTH 3
 165
 166 REG32(OCM, 0xa90)
 167
 168 REG32(DEVCI_RAM, 0xaa0)
 169
 170 REG32(CSG_RAM, 0xab0)
 171
 172 REG32(GPIOB_CTRL, 0xb00)
 173 REG32(GPIOB_CFG_CMOS18, 0xb04)
 174 REG32(GPIOB_CFG_CMOS25, 0xb08)
 175 REG32(GPIOB_CFG_CMOS33, 0xb0c)
 176 REG32(GPIOB_CFG_HSTL, 0xb14)
 177 REG32(GPIOB_DRVR_BIAS_CTRL, 0xb18)
 178
 179 REG32(DDRIOB, 0xb40)
 180 #define DDRIOB_LENGTH 14
 181
 182 #define ZYNQ_SLCR_MMIO_SIZE     0x1000
 183 #define ZYNQ_SLCR_NUM_REGS      (ZYNQ_SLCR_MMIO_SIZE / 4)
 184
 185 #define TYPE_ZYNQ_SLCR "xilinx,zynq_slcr"
 186 OBJECT_DECLARE_SIMPLE_TYPE(ZynqSLCRState, ZYNQ_SLCR)
 187
 188 struct ZynqSLCRState {
 189     SysBusDevice parent_obj;
 190
 191     MemoryRegion iomem;
 192
 193     uint32_t regs[ZYNQ_SLCR_NUM_REGS];
 194
 195     Clock *ps_clk;
 196     Clock *uart0_ref_clk;
 197     Clock *uart1_ref_clk;
 198 };
 199
 200 /*
 201  * return the output frequency of ARM/DDR/IO pll
 202  * using input frequency and PLL_CTRL register
 203  */
 204 static uint64_t zynq_slcr_compute_pll(uint64_t input, uint32_t ctrl_reg)
 205 {
 206     uint32_t mult = ((ctrl_reg & R_xxx_PLL_CTRL_PLL_FPDIV_MASK) >>
 207             R_xxx_PLL_CTRL_PLL_FPDIV_SHIFT);
 208
 209     /* first, check if pll is bypassed */
 210     if (ctrl_reg & R_xxx_PLL_CTRL_PLL_BYPASS_FORCE_MASK) {
 211         return input;
 212     }
 213
 214     /* is pll disabled ? */
 215     if (ctrl_reg & (R_xxx_PLL_CTRL_PLL_RESET_MASK |
 216                     R_xxx_PLL_CTRL_PLL_PWRDWN_MASK)) {
 217         return 0;
 218     }
 219
 220     /* Consider zero feedback as maximum divide ratio possible */
 221     if (!mult) {
 222         mult = 1 << R_xxx_PLL_CTRL_PLL_FPDIV_LENGTH;
 223     }
 224
 225     /* frequency multiplier -> period division */
 226     return input / mult;
 227 }
 228
 229 /*
 230  * return the output period of a clock given:
 231  * + the periods in an array corresponding to input mux selector
 232  * + the register xxx_CLK_CTRL value
 233  * + enable bit index in ctrl register
 234  *
 235  * This function makes the assumption that the ctrl_reg value is organized as
 236  * follows:
 237  * + bits[13:8]  clock frequency divisor
 238  * + bits[5:4]   clock mux selector (index in array)
 239  * + bits[index] clock enable
 240  */
 241 static uint64_t zynq_slcr_compute_clock(const uint64_t periods[],
 242                                         uint32_t ctrl_reg,
 243                                         unsigned index)
 244 {
 245     uint32_t srcsel = extract32(ctrl_reg, 4, 2); /* bits [5:4] */
 246     uint32_t divisor = extract32(ctrl_reg, 8, 6); /* bits [13:8] */
 247
 248     /* first, check if clock is disabled */
 249     if (((ctrl_reg >> index) & 1u) == 0) {
 250         return 0;
 251     }
 252
 253     /*
 254      * according to the Zynq technical ref. manual UG585 v1.12.2 in
 255      * Clocks chapter, section 25.10.1 page 705:
 256      * "The 6-bit divider provides a divide range of 1 to 63"
 257      * We follow here what is implemented in linux kernel and consider
 258      * the 0 value as a bypass (no division).
 259      */
 260     /* frequency divisor -> period multiplication */
 261     return periods[srcsel] * (divisor ? divisor : 1u);
 262 }
 263
 264 /*
 265  * macro helper around zynq_slcr_compute_clock to avoid repeating
 266  * the register name.
 267  */
 268 #define ZYNQ_COMPUTE_CLK(state, plls, reg, enable_field) \
 269     zynq_slcr_compute_clock((plls), (state)->regs[reg], \
 270                             reg ## _ ## enable_field ## _SHIFT)
 271
 272 /**
 273  * Compute and set the ouputs clocks periods.
 274  * But do not propagate them further. Connected clocks
 275  * will not receive any updates (See zynq_slcr_compute_clocks())
 276  */
 277 static void zynq_slcr_compute_clocks(ZynqSLCRState *s)
 278 {
 279     uint64_t ps_clk = clock_get(s->ps_clk);
 280
 281     /* consider outputs clocks are disabled while in reset */
 282     if (device_is_in_reset(DEVICE(s))) {
 283         ps_clk = 0;
 284     }
 285
 286     uint64_t io_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_IO_PLL_CTRL]);
 287     uint64_t arm_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_ARM_PLL_CTRL]);
 288     uint64_t ddr_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_DDR_PLL_CTRL]);
 289
 290     uint64_t uart_mux[4] = {io_pll, io_pll, arm_pll, ddr_pll};
 291
 292     /* compute uartX reference clocks */
 293     clock_set(s->uart0_ref_clk,
 294               ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT0));
 295     clock_set(s->uart1_ref_clk,
 296               ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT1));
 297 }
 298
 299 /**
 300  * Propagate the outputs clocks.
 301  * zynq_slcr_compute_clocks() should have been called before
 302  * to configure them.
 303  */
 304 static void zynq_slcr_propagate_clocks(ZynqSLCRState *s)
 305 {
 306     clock_propagate(s->uart0_ref_clk);
 307     clock_propagate(s->uart1_ref_clk);
 308 }
 309
 310 static void zynq_slcr_ps_clk_callback(void *opaque, ClockEvent event)
 311 {
 312     ZynqSLCRState *s = (ZynqSLCRState *) opaque;
 313
 314     zynq_slcr_compute_clocks(s);
 315     zynq_slcr_propagate_clocks(s);
 316 }
 317
 318 static void zynq_slcr_reset_init(Object *obj, ResetType type)
 319 {
 320     ZynqSLCRState *s = ZYNQ_SLCR(obj);
 321     int i;
 322
 323     DB_PRINT("RESET\n");
 324
 325     s->regs[R_LOCKSTA] = 1;
 326     /* 0x100 - 0x11C */
 327     s->regs[R_ARM_PLL_CTRL]   = 0x0001A008;
 328     s->regs[R_DDR_PLL_CTRL]   = 0x0001A008;
 329     s->regs[R_IO_PLL_CTRL]    = 0x0001A008;
 330     s->regs[R_PLL_STATUS]     = 0x0000003F;
 331     s->regs[R_ARM_PLL_CFG]    = 0x00014000;
 332     s->regs[R_DDR_PLL_CFG]    = 0x00014000;
 333     s->regs[R_IO_PLL_CFG]     = 0x00014000;
 334
 335     /* 0x120 - 0x16C */
 336     s->regs[R_ARM_CLK_CTRL]   = 0x1F000400;
 337     s->regs[R_DDR_CLK_CTRL]   = 0x18400003;
 338     s->regs[R_DCI_CLK_CTRL]   = 0x01E03201;
 339     s->regs[R_APER_CLK_CTRL]  = 0x01FFCCCD;
 340     s->regs[R_USB0_CLK_CTRL]  = s->regs[R_USB1_CLK_CTRL]  = 0x00101941;
 341     s->regs[R_GEM0_RCLK_CTRL] = s->regs[R_GEM1_RCLK_CTRL] = 0x00000001;
 342     s->regs[R_GEM0_CLK_CTRL]  = s->regs[R_GEM1_CLK_CTRL]  = 0x00003C01;
 343     s->regs[R_SMC_CLK_CTRL]   = 0x00003C01;
 344     s->regs[R_LQSPI_CLK_CTRL] = 0x00002821;
 345     s->regs[R_SDIO_CLK_CTRL]  = 0x00001E03;
 346     s->regs[R_UART_CLK_CTRL]  = 0x00003F03;
 347     s->regs[R_SPI_CLK_CTRL]   = 0x00003F03;
 348     s->regs[R_CAN_CLK_CTRL]   = 0x00501903;
 349     s->regs[R_DBG_CLK_CTRL]   = 0x00000F03;
 350     s->regs[R_PCAP_CLK_CTRL]  = 0x00000F01;
 351
 352     /* 0x170 - 0x1AC */
 353     s->regs[R_FPGA0_CLK_CTRL] = s->regs[R_FPGA1_CLK_CTRL]
 354                               = s->regs[R_FPGA2_CLK_CTRL]
 355                               = s->regs[R_FPGA3_CLK_CTRL] = 0x00101800;
 356     s->regs[R_FPGA0_THR_STA] = s->regs[R_FPGA1_THR_STA]
 357                              = s->regs[R_FPGA2_THR_STA]
 358                              = s->regs[R_FPGA3_THR_STA] = 0x00010000;
 359
 360     /* 0x1B0 - 0x1D8 */
 361     s->regs[R_BANDGAP_TRIP]   = 0x0000001F;
 362     s->regs[R_PLL_PREDIVISOR] = 0x00000001;
 363     s->regs[R_CLK_621_TRUE]   = 0x00000001;
 364
 365     /* 0x200 - 0x25C */
 366     s->regs[R_FPGA_RST_CTRL]  = 0x01F33F0F;
 367     s->regs[R_RST_REASON]     = 0x00000040;
 368
 369     s->regs[R_BOOT_MODE]      = 0x00000001;
 370
 371     /* 0x700 - 0x7D4 */
 372     for (i = 0; i < 54; i++) {
 373         s->regs[R_MIO + i] = 0x00001601;
 374     }
 375     for (i = 2; i <= 8; i++) {
 376         s->regs[R_MIO + i] = 0x00000601;
 377     }
 378
 379     s->regs[R_MIO_MST_TRI0] = s->regs[R_MIO_MST_TRI1] = 0xFFFFFFFF;
 380
 381     s->regs[R_CPU_RAM + 0] = s->regs[R_CPU_RAM + 1] = s->regs[R_CPU_RAM + 3]
 382                            = s->regs[R_CPU_RAM + 4] = s->regs[R_CPU_RAM + 7]
 383                            = 0x00010101;
 384     s->regs[R_CPU_RAM + 2] = s->regs[R_CPU_RAM + 5] = 0x01010101;
 385     s->regs[R_CPU_RAM + 6] = 0x00000001;
 386
 387     s->regs[R_IOU + 0] = s->regs[R_IOU + 1] = s->regs[R_IOU + 2]
 388                        = s->regs[R_IOU + 3] = 0x09090909;
 389     s->regs[R_IOU + 4] = s->regs[R_IOU + 5] = 0x00090909;
 390     s->regs[R_IOU + 6] = 0x00000909;
 391
 392     s->regs[R_DMAC_RAM] = 0x00000009;
 393
 394     s->regs[R_AFI0 + 0] = s->regs[R_AFI0 + 1] = 0x09090909;
 395     s->regs[R_AFI1 + 0] = s->regs[R_AFI1 + 1] = 0x09090909;
 396     s->regs[R_AFI2 + 0] = s->regs[R_AFI2 + 1] = 0x09090909;
 397     s->regs[R_AFI3 + 0] = s->regs[R_AFI3 + 1] = 0x09090909;
 398     s->regs[R_AFI0 + 2] = s->regs[R_AFI1 + 2] = s->regs[R_AFI2 + 2]
 399                         = s->regs[R_AFI3 + 2] = 0x00000909;
 400
 401     s->regs[R_OCM + 0] = 0x01010101;
 402     s->regs[R_OCM + 1] = s->regs[R_OCM + 2] = 0x09090909;
 403
 404     s->regs[R_DEVCI_RAM] = 0x00000909;
 405     s->regs[R_CSG_RAM]   = 0x00000001;
 406
 407     s->regs[R_DDRIOB + 0] = s->regs[R_DDRIOB + 1] = s->regs[R_DDRIOB + 2]
 408                           = s->regs[R_DDRIOB + 3] = 0x00000e00;
 409     s->regs[R_DDRIOB + 4] = s->regs[R_DDRIOB + 5] = s->regs[R_DDRIOB + 6]
 410                           = 0x00000e00;
 411     s->regs[R_DDRIOB + 12] = 0x00000021;
 412 }
 413
 414 static void zynq_slcr_reset_hold(Object *obj)
 415 {
 416     ZynqSLCRState *s = ZYNQ_SLCR(obj);
 417
 418     /* will disable all output clocks */
 419     zynq_slcr_compute_clocks(s);
 420     zynq_slcr_propagate_clocks(s);
 421 }
 422
 423 static void zynq_slcr_reset_exit(Object *obj)
 424 {
 425     ZynqSLCRState *s = ZYNQ_SLCR(obj);
 426
 427     /* will compute output clocks according to ps_clk and registers */
 428     zynq_slcr_compute_clocks(s);
 429     zynq_slcr_propagate_clocks(s);
 430 }
 431
 432 static bool zynq_slcr_check_offset(hwaddr offset, bool rnw)
 433 {
 434     switch (offset) {
 435     case R_LOCK:
 436     case R_UNLOCK:
 437     case R_DDR_CAL_START:
 438     case R_DDR_REF_START:
 439         return !rnw; /* Write only */
 440     case R_LOCKSTA:
 441     case R_FPGA0_THR_STA:
 442     case R_FPGA1_THR_STA:
 443     case R_FPGA2_THR_STA:
 444     case R_FPGA3_THR_STA:
 445     case R_BOOT_MODE:
 446     case R_PSS_IDCODE:
 447     case R_DDR_CMD_STA:
 448     case R_DDR_DFI_STATUS:
 449     case R_PLL_STATUS:
 450         return rnw;/* read only */
 451     case R_SCL:
 452     case R_ARM_PLL_CTRL ... R_IO_PLL_CTRL:
 453     case R_ARM_PLL_CFG ... R_IO_PLL_CFG:
 454     case R_ARM_CLK_CTRL ... R_TOPSW_CLK_CTRL:
 455     case R_FPGA0_CLK_CTRL ... R_FPGA0_THR_CNT:
 456     case R_FPGA1_CLK_CTRL ... R_FPGA1_THR_CNT:
 457     case R_FPGA2_CLK_CTRL ... R_FPGA2_THR_CNT:
 458     case R_FPGA3_CLK_CTRL ... R_FPGA3_THR_CNT:
 459     case R_BANDGAP_TRIP:
 460     case R_PLL_PREDIVISOR:
 461     case R_CLK_621_TRUE:
 462     case R_PSS_RST_CTRL ... R_A9_CPU_RST_CTRL:
 463     case R_RS_AWDT_CTRL:
 464     case R_RST_REASON:
 465     case R_REBOOT_STATUS:
 466     case R_APU_CTRL:
 467     case R_WDT_CLK_SEL:
 468     case R_TZ_DMA_NS ... R_TZ_DMA_PERIPH_NS:
 469     case R_DDR_URGENT:
 470     case R_DDR_URGENT_SEL:
 471     case R_MIO ... R_MIO + MIO_LENGTH - 1:
 472     case R_MIO_LOOPBACK ... R_MIO_MST_TRI1:
 473     case R_SD0_WP_CD_SEL:
 474     case R_SD1_WP_CD_SEL:
 475     case R_LVL_SHFTR_EN:
 476     case R_OCM_CFG:
 477     case R_CPU_RAM:
 478     case R_IOU:
 479     case R_DMAC_RAM:
 480     case R_AFI0 ... R_AFI3 + AFI_LENGTH - 1:
 481     case R_OCM:
 482     case R_DEVCI_RAM:
 483     case R_CSG_RAM:
 484     case R_GPIOB_CTRL ... R_GPIOB_CFG_CMOS33:
 485     case R_GPIOB_CFG_HSTL:
 486     case R_GPIOB_DRVR_BIAS_CTRL:
 487     case R_DDRIOB ... R_DDRIOB + DDRIOB_LENGTH - 1:
 488         return true;
 489     default:
 490         return false;
 491     }
 492 }
 493
 494 static uint64_t zynq_slcr_read(void *opaque, hwaddr offset,
 495     unsigned size)
 496 {
 497     ZynqSLCRState *s = opaque;
 498     offset /= 4;
 499     uint32_t ret = s->regs[offset];
 500
 501     if (!zynq_slcr_check_offset(offset, true)) {
 502         qemu_log_mask(LOG_GUEST_ERROR, "zynq_slcr: Invalid read access to "
 503                       " addr %" HWADDR_PRIx "\n", offset * 4);
 504     }
 505
 506     DB_PRINT("addr: %08" HWADDR_PRIx " data: %08" PRIx32 "\n", offset * 4, ret);
 507     return ret;
 508 }
 509
 510 static void zynq_slcr_write(void *opaque, hwaddr offset,
 511                           uint64_t val, unsigned size)
 512 {
 513     ZynqSLCRState *s = (ZynqSLCRState *)opaque;
 514     offset /= 4;
 515
 516     DB_PRINT("addr: %08" HWADDR_PRIx " data: %08" PRIx64 "\n", offset * 4, val);
 517
 518     if (!zynq_slcr_check_offset(offset, false)) {
 519         qemu_log_mask(LOG_GUEST_ERROR, "zynq_slcr: Invalid write access to "
 520                       "addr %" HWADDR_PRIx "\n", offset * 4);
 521         return;
 522     }
 523
 524     switch (offset) {
 525     case R_SCL:
 526         s->regs[R_SCL] = val & 0x1;
 527         return;
 528     case R_LOCK:
 529         if ((val & 0xFFFF) == XILINX_LOCK_KEY) {
 530             DB_PRINT("XILINX LOCK 0xF8000000 + 0x%x <= 0x%x\n", (int)offset,
 531                 (unsigned)val & 0xFFFF);
 532             s->regs[R_LOCKSTA] = 1;
 533         } else {
 534             DB_PRINT("WRONG XILINX LOCK KEY 0xF8000000 + 0x%x <= 0x%x\n",
 535                 (int)offset, (unsigned)val & 0xFFFF);
 536         }
 537         return;
 538     case R_UNLOCK:
 539         if ((val & 0xFFFF) == XILINX_UNLOCK_KEY) {
 540             DB_PRINT("XILINX UNLOCK 0xF8000000 + 0x%x <= 0x%x\n", (int)offset,
 541                 (unsigned)val & 0xFFFF);
 542             s->regs[R_LOCKSTA] = 0;
 543         } else {
 544             DB_PRINT("WRONG XILINX UNLOCK KEY 0xF8000000 + 0x%x <= 0x%x\n",
 545                 (int)offset, (unsigned)val & 0xFFFF);
 546         }
 547         return;
 548     }
 549
 550     if (s->regs[R_LOCKSTA]) {
 551         qemu_log_mask(LOG_GUEST_ERROR,
 552                       "SCLR registers are locked. Unlock them first\n");
 553         return;
 554     }
 555     s->regs[offset] = val;
 556
 557     switch (offset) {
 558     case R_PSS_RST_CTRL:
 559         if (FIELD_EX32(val, PSS_RST_CTRL, SOFT_RST)) {
 560             qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
 561         }
 562         break;
 563     case R_IO_PLL_CTRL:
 564     case R_ARM_PLL_CTRL:
 565     case R_DDR_PLL_CTRL:
 566     case R_UART_CLK_CTRL:
 567         zynq_slcr_compute_clocks(s);
 568         zynq_slcr_propagate_clocks(s);
 569         break;
 570     }
 571 }
 572
 573 static const MemoryRegionOps slcr_ops = {
 574     .read = zynq_slcr_read,
 575     .write = zynq_slcr_write,
 576     .endianness = DEVICE_NATIVE_ENDIAN,
 577 };
 578
 579 static const ClockPortInitArray zynq_slcr_clocks = {
 580     QDEV_CLOCK_IN(ZynqSLCRState, ps_clk, zynq_slcr_ps_clk_callback, ClockUpdate),
 581     QDEV_CLOCK_OUT(ZynqSLCRState, uart0_ref_clk),
 582     QDEV_CLOCK_OUT(ZynqSLCRState, uart1_ref_clk),
 583     QDEV_CLOCK_END
 584 };
 585
 586 static void zynq_slcr_init(Object *obj)
 587 {
 588     ZynqSLCRState *s = ZYNQ_SLCR(obj);
 589
 590     memory_region_init_io(&s->iomem, obj, &slcr_ops, s, "slcr",
 591                           ZYNQ_SLCR_MMIO_SIZE);
 592     sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem);
 593
 594     qdev_init_clocks(DEVICE(obj), zynq_slcr_clocks);
 595 }
 596
 597 static const VMStateDescription vmstate_zynq_slcr = {
 598     .name = "zynq_slcr",
 599     .version_id = 3,
 600     .minimum_version_id = 2,
 601     .fields = (VMStateField[]) {
 602         VMSTATE_UINT32_ARRAY(regs, ZynqSLCRState, ZYNQ_SLCR_NUM_REGS),
 603         VMSTATE_CLOCK_V(ps_clk, ZynqSLCRState, 3),
 604         VMSTATE_END_OF_LIST()
 605     }
 606 };
 607
 608 static void zynq_slcr_class_init(ObjectClass *klass, void *data)
 609 {
 610     DeviceClass *dc = DEVICE_CLASS(klass);
 611     ResettableClass *rc = RESETTABLE_CLASS(klass);
 612
 613     dc->vmsd = &vmstate_zynq_slcr;
 614     rc->phases.enter = zynq_slcr_reset_init;
 615     rc->phases.hold  = zynq_slcr_reset_hold;
 616     rc->phases.exit  = zynq_slcr_reset_exit;
 617 }
 618
 619 static const TypeInfo zynq_slcr_info = {
 620     .class_init = zynq_slcr_class_init,
 621     .name  = TYPE_ZYNQ_SLCR,
 622     .parent = TYPE_SYS_BUS_DEVICE,
 623     .instance_size  = sizeof(ZynqSLCRState),
 624     .instance_init = zynq_slcr_init,
 625 };
 626
 627 static void zynq_slcr_register_types(void)
 628 {
 629     type_register_static(&zynq_slcr_info);
 630 }
 631
 632 type_init(zynq_slcr_register_types)