include/hw/ide/internal.h

   1 #ifndef HW_IDE_INTERNAL_H
   2 #define HW_IDE_INTERNAL_H
   3
   4 /*
   5  * QEMU IDE Emulation -- internal header file
   6  * only files in hw/ide/ are supposed to include this file.
   7  * non-internal declarations are in hw/ide.h
   8  */
   9
  10 #include "hw/ide.h"
  11 #include "exec/ioport.h"
  12 #include "hw/ide/ide-dma.h"
  13 #include "hw/ide/ide-dev.h"
  14
  15 /* debug IDE devices */
  16 #define USE_DMA_CDROM
  17 #include "qom/object.h"
  18
  19 #define TYPE_IDE_BUS "IDE"
  20 OBJECT_DECLARE_SIMPLE_TYPE(IDEBus, IDE_BUS)
  21
  22 /* Device/Head ("select") Register */
  23 #define ATA_DEV_SELECT          0x10
  24 /* ATA1,3: Defined as '1'.
  25  * ATA2:   Reserved.
  26  * ATA3-7: obsolete. */
  27 #define ATA_DEV_ALWAYS_ON       0xA0
  28 #define ATA_DEV_LBA             0x40
  29 #define ATA_DEV_LBA_MSB         0x0F  /* LBA 24:27 */
  30 #define ATA_DEV_HS              0x0F  /* HS 3:0 */
  31
  32
  33 /* Bits of HD_STATUS */
  34 #define ERR_STAT                0x01
  35 #define INDEX_STAT              0x02
  36 #define ECC_STAT                0x04    /* Corrected error */
  37 #define DRQ_STAT                0x08
  38 #define SEEK_STAT               0x10
  39 #define SRV_STAT                0x10
  40 #define WRERR_STAT              0x20
  41 #define READY_STAT              0x40
  42 #define BUSY_STAT               0x80
  43
  44 /* Bits for HD_ERROR */
  45 #define MARK_ERR                0x01    /* Bad address mark */
  46 #define TRK0_ERR                0x02    /* couldn't find track 0 */
  47 #define ABRT_ERR                0x04    /* Command aborted */
  48 #define MCR_ERR                 0x08    /* media change request */
  49 #define ID_ERR                  0x10    /* ID field not found */
  50 #define MC_ERR                  0x20    /* media changed */
  51 #define ECC_ERR                 0x40    /* Uncorrectable ECC error */
  52 #define BBD_ERR                 0x80    /* pre-EIDE meaning:  block marked bad */
  53 #define ICRC_ERR                0x80    /* new meaning:  CRC error during transfer */
  54
  55 /* Bits of HD_NSECTOR */
  56 #define CD                      0x01
  57 #define IO                      0x02
  58 #define REL                     0x04
  59 #define TAG_MASK                0xf8
  60
  61 /* Bits of Device Control register */
  62 #define IDE_CTRL_HOB            0x80
  63 #define IDE_CTRL_RESET          0x04
  64 #define IDE_CTRL_DISABLE_IRQ    0x02
  65
  66 /* ACS-2 T13/2015-D Table B.2 Command codes */
  67 #define WIN_NOP                         0x00
  68 /* reserved                             0x01..0x02 */
  69 #define CFA_REQ_EXT_ERROR_CODE          0x03 /* CFA Request Extended Error Code */
  70 /* reserved                             0x04..0x05 */
  71 #define WIN_DSM                         0x06
  72 /* reserved                             0x07 */
  73 #define WIN_DEVICE_RESET                0x08
  74 /* reserved                             0x09..0x0a */
  75 /* REQUEST SENSE DATA EXT               0x0B */
  76 /* reserved                             0x0C..0x0F */
  77 #define WIN_RECAL                       0x10 /* obsolete since ATA4 */
  78 /* obsolete since ATA3, retired in ATA4 0x11..0x1F */
  79 #define WIN_READ                        0x20 /* 28-Bit */
  80 #define WIN_READ_ONCE                   0x21 /* 28-Bit w/o retries, obsolete since ATA5 */
  81 /* obsolete since ATA4                  0x22..0x23 */
  82 #define WIN_READ_EXT                    0x24 /* 48-Bit */
  83 #define WIN_READDMA_EXT                 0x25 /* 48-Bit */
  84 #define WIN_READDMA_QUEUED_EXT          0x26 /* 48-Bit, obsolete since ACS2 */
  85 #define WIN_READ_NATIVE_MAX_EXT         0x27 /* 48-Bit */
  86 /* reserved                             0x28 */
  87 #define WIN_MULTREAD_EXT                0x29 /* 48-Bit */
  88 /* READ STREAM DMA EXT                  0x2A */
  89 /* READ STREAM EXT                      0x2B */
  90 /* reserved                             0x2C..0x2E */
  91 /* READ LOG EXT                         0x2F */
  92 #define WIN_WRITE                       0x30 /* 28-Bit */
  93 #define WIN_WRITE_ONCE                  0x31 /* 28-Bit w/o retries, obsolete since ATA5 */
  94 /* obsolete since ATA4                  0x32..0x33 */
  95 #define WIN_WRITE_EXT                   0x34 /* 48-Bit */
  96 #define WIN_WRITEDMA_EXT                0x35 /* 48-Bit */
  97 #define WIN_WRITEDMA_QUEUED_EXT         0x36 /* 48-Bit */
  98 #define WIN_SET_MAX_EXT                 0x37 /* 48-Bit, obsolete since ACS2 */
  99 #define WIN_SET_MAX_EXT                 0x37 /* 48-Bit */
 100 #define CFA_WRITE_SECT_WO_ERASE         0x38 /* CFA Write Sectors without erase */
 101 #define WIN_MULTWRITE_EXT               0x39 /* 48-Bit */
 102 /* WRITE STREAM DMA EXT                 0x3A */
 103 /* WRITE STREAM EXT                     0x3B */
 104 #define WIN_WRITE_VERIFY                0x3C /* 28-Bit, obsolete since ATA4 */
 105 /* WRITE DMA FUA EXT                    0x3D */
 106 /* obsolete since ACS2                  0x3E */
 107 /* WRITE LOG EXT                        0x3F */
 108 #define WIN_VERIFY                      0x40 /* 28-Bit - Read Verify Sectors */
 109 #define WIN_VERIFY_ONCE                 0x41 /* 28-Bit - w/o retries, obsolete since ATA5 */
 110 #define WIN_VERIFY_EXT                  0x42 /* 48-Bit */
 111 /* reserved                             0x43..0x44 */
 112 /* WRITE UNCORRECTABLE EXT              0x45 */
 113 /* reserved                             0x46 */
 114 /* READ LOG DMA EXT                     0x47 */
 115 /* reserved                             0x48..0x4F */
 116 /* obsolete since ATA4                  0x50 */
 117 /* CONFIGURE STREAM                     0x51 */
 118 /* reserved                             0x52..0x56 */
 119 /* WRITE LOG DMA EXT                    0x57 */
 120 /* reserved                             0x58..0x5A */
 121 /* TRUSTED NON DATA                     0x5B */
 122 /* TRUSTED RECEIVE                      0x5C */
 123 /* TRUSTED RECEIVE DMA                  0x5D */
 124 /* TRUSTED SEND                         0x5E */
 125 /* TRUSTED SEND DMA                     0x5F */
 126 /* READ FPDMA QUEUED                    0x60 */
 127 /* WRITE FPDMA QUEUED                   0x61 */
 128 /* reserved                             0x62->0x6F */
 129 #define WIN_SEEK                        0x70 /* obsolete since ATA7 */
 130 /* reserved                             0x71-0x7F */
 131 /* vendor specific                      0x80-0x86 */
 132 #define CFA_TRANSLATE_SECTOR            0x87 /* CFA Translate Sector */
 133 /* vendor specific                      0x88-0x8F */
 134 #define WIN_DIAGNOSE                    0x90
 135 #define WIN_SPECIFY                     0x91 /* set drive geometry translation, obsolete since ATA6 */
 136 #define WIN_DOWNLOAD_MICROCODE          0x92
 137 /* DOWNLOAD MICROCODE DMA               0x93 */
 138 #define WIN_STANDBYNOW2                 0x94 /* retired in ATA4 */
 139 #define WIN_IDLEIMMEDIATE2              0x95 /* force drive to become "ready", retired in ATA4 */
 140 #define WIN_STANDBY2                    0x96 /* retired in ATA4 */
 141 #define WIN_SETIDLE2                    0x97 /* retired in ATA4 */
 142 #define WIN_CHECKPOWERMODE2             0x98 /* retired in ATA4 */
 143 #define WIN_SLEEPNOW2                   0x99 /* retired in ATA4 */
 144 /* vendor specific                      0x9A */
 145 /* reserved                             0x9B..0x9F */
 146 #define WIN_PACKETCMD                   0xA0 /* Send a packet command. */
 147 #define WIN_PIDENTIFY                   0xA1 /* identify ATAPI device */
 148 #define WIN_QUEUED_SERVICE              0xA2 /* obsolete since ACS2 */
 149 /* reserved                             0xA3..0xAF */
 150 #define WIN_SMART                       0xB0 /* self-monitoring and reporting */
 151 /* Device Configuration Overlay         0xB1 */
 152 /* reserved                             0xB2..0xB3 */
 153 /* Sanitize Device                      0xB4 */
 154 /* reserved                             0xB5 */
 155 /* NV Cache                             0xB6 */
 156 /* reserved for CFA                     0xB7..0xBB */
 157 #define CFA_ACCESS_METADATA_STORAGE     0xB8
 158 /* reserved                             0xBC..0xBF */
 159 #define CFA_ERASE_SECTORS               0xC0 /* microdrives implement as NOP */
 160 /* vendor specific                      0xC1..0xC3 */
 161 #define WIN_MULTREAD                    0xC4 /* read sectors using multiple mode*/
 162 #define WIN_MULTWRITE                   0xC5 /* write sectors using multiple mode */
 163 #define WIN_SETMULT                     0xC6 /* enable/disable multiple mode */
 164 #define WIN_READDMA_QUEUED              0xC7 /* read sectors using Queued DMA transfers, obsolete since ACS2 */
 165 #define WIN_READDMA                     0xC8 /* read sectors using DMA transfers */
 166 #define WIN_READDMA_ONCE                0xC9 /* 28-Bit - w/o retries, obsolete since ATA5 */
 167 #define WIN_WRITEDMA                    0xCA /* write sectors using DMA transfers */
 168 #define WIN_WRITEDMA_ONCE               0xCB /* 28-Bit - w/o retries, obsolete since ATA5 */
 169 #define WIN_WRITEDMA_QUEUED             0xCC /* write sectors using Queued DMA transfers, obsolete since ACS2 */
 170 #define CFA_WRITE_MULTI_WO_ERASE        0xCD /* CFA Write multiple without erase */
 171 /* WRITE MULTIPLE FUA EXT               0xCE */
 172 /* reserved                             0xCF..0xDO */
 173 /* CHECK MEDIA CARD TYPE                0xD1 */
 174 /* reserved for media card pass through 0xD2..0xD4 */
 175 /* reserved                             0xD5..0xD9 */
 176 #define WIN_GETMEDIASTATUS              0xDA /* obsolete since ATA8 */
 177 /* obsolete since ATA3, retired in ATA4 0xDB..0xDD */
 178 #define WIN_DOORLOCK                    0xDE /* lock door on removable drives, obsolete since ATA8 */
 179 #define WIN_DOORUNLOCK                  0xDF /* unlock door on removable drives, obsolete since ATA8 */
 180 #define WIN_STANDBYNOW1                 0xE0
 181 #define WIN_IDLEIMMEDIATE               0xE1 /* force drive to become "ready" */
 182 #define WIN_STANDBY                     0xE2 /* Set device in Standby Mode */
 183 #define WIN_SETIDLE1                    0xE3
 184 #define WIN_READ_BUFFER                 0xE4 /* force read only 1 sector */
 185 #define WIN_CHECKPOWERMODE1             0xE5
 186 #define WIN_SLEEPNOW1                   0xE6
 187 #define WIN_FLUSH_CACHE                 0xE7
 188 #define WIN_WRITE_BUFFER                0xE8 /* force write only 1 sector */
 189 /* READ BUFFER DMA                      0xE9 */
 190 #define WIN_FLUSH_CACHE_EXT             0xEA /* 48-Bit */
 191 /* WRITE BUFFER DMA                     0xEB */
 192 #define WIN_IDENTIFY                    0xEC /* ask drive to identify itself */
 193 #define WIN_MEDIAEJECT                  0xED /* obsolete since ATA8 */
 194 /* obsolete since ATA4                  0xEE */
 195 #define WIN_SETFEATURES                 0xEF /* set special drive features */
 196 #define IBM_SENSE_CONDITION             0xF0 /* measure disk temperature, vendor specific */
 197 #define WIN_SECURITY_SET_PASS           0xF1
 198 #define WIN_SECURITY_UNLOCK             0xF2
 199 #define WIN_SECURITY_ERASE_PREPARE      0xF3
 200 #define WIN_SECURITY_ERASE_UNIT         0xF4
 201 #define WIN_SECURITY_FREEZE_LOCK        0xF5
 202 #define CFA_WEAR_LEVEL                  0xF5 /* microdrives implement as NOP; not specified in T13! */
 203 #define WIN_SECURITY_DISABLE            0xF6
 204 /* vendor specific                      0xF7 */
 205 #define WIN_READ_NATIVE_MAX             0xF8 /* return the native maximum address */
 206 #define WIN_SET_MAX                     0xF9
 207 /* vendor specific                      0xFA..0xFF */
 208
 209 /* set to 1 set disable mult support */
 210 #define MAX_MULT_SECTORS 16
 211
 212 #define IDE_DMA_BUF_SECTORS 256
 213
 214 /* feature values for Data Set Management */
 215 #define DSM_TRIM                        0x01
 216
 217 #if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
 218 #error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
 219 #endif
 220
 221 /* ATAPI defines */
 222
 223 #define ATAPI_PACKET_SIZE 12
 224
 225 /* The generic packet command opcodes for CD/DVD Logical Units,
 226  * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
 227 #define GPCMD_BLANK                         0xa1
 228 #define GPCMD_CLOSE_TRACK                   0x5b
 229 #define GPCMD_FLUSH_CACHE                   0x35
 230 #define GPCMD_FORMAT_UNIT                   0x04
 231 #define GPCMD_GET_CONFIGURATION             0x46
 232 #define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
 233 #define GPCMD_GET_PERFORMANCE               0xac
 234 #define GPCMD_INQUIRY                       0x12
 235 #define GPCMD_LOAD_UNLOAD                   0xa6
 236 #define GPCMD_MECHANISM_STATUS              0xbd
 237 #define GPCMD_MODE_SELECT_10                0x55
 238 #define GPCMD_MODE_SENSE_10                 0x5a
 239 #define GPCMD_PAUSE_RESUME                  0x4b
 240 #define GPCMD_PLAY_AUDIO_10                 0x45
 241 #define GPCMD_PLAY_AUDIO_MSF                0x47
 242 #define GPCMD_PLAY_AUDIO_TI                 0x48
 243 #define GPCMD_PLAY_CD                       0xbc
 244 #define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
 245 #define GPCMD_READ_10                       0x28
 246 #define GPCMD_READ_12                       0xa8
 247 #define GPCMD_READ_CDVD_CAPACITY            0x25
 248 #define GPCMD_READ_CD                       0xbe
 249 #define GPCMD_READ_CD_MSF                   0xb9
 250 #define GPCMD_READ_DISC_INFO                0x51
 251 #define GPCMD_READ_DVD_STRUCTURE            0xad
 252 #define GPCMD_READ_FORMAT_CAPACITIES        0x23
 253 #define GPCMD_READ_HEADER                   0x44
 254 #define GPCMD_READ_TRACK_RZONE_INFO         0x52
 255 #define GPCMD_READ_SUBCHANNEL               0x42
 256 #define GPCMD_READ_TOC_PMA_ATIP             0x43
 257 #define GPCMD_REPAIR_RZONE_TRACK            0x58
 258 #define GPCMD_REPORT_KEY                    0xa4
 259 #define GPCMD_REQUEST_SENSE                 0x03
 260 #define GPCMD_RESERVE_RZONE_TRACK           0x53
 261 #define GPCMD_SCAN                          0xba
 262 #define GPCMD_SEEK                          0x2b
 263 #define GPCMD_SEND_DVD_STRUCTURE            0xad
 264 #define GPCMD_SEND_EVENT                    0xa2
 265 #define GPCMD_SEND_KEY                      0xa3
 266 #define GPCMD_SEND_OPC                      0x54
 267 #define GPCMD_SET_READ_AHEAD                0xa7
 268 #define GPCMD_SET_STREAMING                 0xb6
 269 #define GPCMD_START_STOP_UNIT               0x1b
 270 #define GPCMD_STOP_PLAY_SCAN                0x4e
 271 #define GPCMD_TEST_UNIT_READY               0x00
 272 #define GPCMD_VERIFY_10                     0x2f
 273 #define GPCMD_WRITE_10                      0x2a
 274 #define GPCMD_WRITE_AND_VERIFY_10           0x2e
 275 /* This is listed as optional in ATAPI 2.6, but is (curiously)
 276  * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
 277  * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
 278  * drives support it. */
 279 #define GPCMD_SET_SPEED                     0xbb
 280 /* This seems to be a SCSI specific CD-ROM opcode
 281  * to play data at track/index */
 282 #define GPCMD_PLAYAUDIO_TI                  0x48
 283 /*
 284  * From MS Media Status Notification Support Specification. For
 285  * older drives only.
 286  */
 287 #define GPCMD_GET_MEDIA_STATUS              0xda
 288 #define GPCMD_MODE_SENSE_6                  0x1a
 289
 290 #define ATAPI_INT_REASON_CD             0x01 /* 0 = data transfer */
 291 #define ATAPI_INT_REASON_IO             0x02 /* 1 = transfer to the host */
 292 #define ATAPI_INT_REASON_REL            0x04
 293 #define ATAPI_INT_REASON_TAG            0xf8
 294
 295 /* same constants as bochs */
 296 #define ASC_NO_SEEK_COMPLETE                 0x02
 297 #define ASC_ILLEGAL_OPCODE                   0x20
 298 #define ASC_LOGICAL_BLOCK_OOR                0x21
 299 #define ASC_INV_FIELD_IN_CMD_PACKET          0x24
 300 #define ASC_MEDIUM_MAY_HAVE_CHANGED          0x28
 301 #define ASC_INCOMPATIBLE_FORMAT              0x30
 302 #define ASC_MEDIUM_NOT_PRESENT               0x3a
 303 #define ASC_SAVING_PARAMETERS_NOT_SUPPORTED  0x39
 304 #define ASC_DATA_PHASE_ERROR                 0x4b
 305 #define ASC_MEDIA_REMOVAL_PREVENTED          0x53
 306
 307 #define CFA_NO_ERROR            0x00
 308 #define CFA_MISC_ERROR          0x09
 309 #define CFA_INVALID_COMMAND     0x20
 310 #define CFA_INVALID_ADDRESS     0x21
 311 #define CFA_ADDRESS_OVERFLOW    0x2f
 312
 313 #define SMART_READ_DATA       0xd0
 314 #define SMART_READ_THRESH     0xd1
 315 #define SMART_ATTR_AUTOSAVE   0xd2
 316 #define SMART_SAVE_ATTR       0xd3
 317 #define SMART_EXECUTE_OFFLINE 0xd4
 318 #define SMART_READ_LOG        0xd5
 319 #define SMART_WRITE_LOG       0xd6
 320 #define SMART_ENABLE          0xd8
 321 #define SMART_DISABLE         0xd9
 322 #define SMART_STATUS          0xda
 323
 324 extern const char *IDE_DMA_CMD_lookup[IDE_DMA__COUNT];
 325
 326 extern const MemoryRegionPortio ide_portio_list[];
 327 extern const MemoryRegionPortio ide_portio2_list[];
 328
 329 #define ide_cmd_is_read(s) \
 330         ((s)->dma_cmd == IDE_DMA_READ)
 331
 332 typedef struct IDEBufferedRequest {
 333     QLIST_ENTRY(IDEBufferedRequest) list;
 334     QEMUIOVector qiov;
 335     QEMUIOVector *original_qiov;
 336     BlockCompletionFunc *original_cb;
 337     void *original_opaque;
 338     bool orphaned;
 339 } IDEBufferedRequest;
 340
 341 struct IDEBus {
 342     BusState qbus;
 343     IDEDevice *master;
 344     IDEDevice *slave;
 345     IDEState ifs[2];
 346     QEMUBH *bh;
 347
 348     int bus_id;
 349     int max_units;
 350     IDEDMA *dma;
 351     uint8_t unit;
 352     uint8_t cmd;
 353     qemu_irq irq; /* bus output */
 354
 355     int error_status;
 356     uint8_t retry_unit;
 357     int64_t retry_sector_num;
 358     uint32_t retry_nsector;
 359     PortioList portio_list;
 360     PortioList portio2_list;
 361     VMChangeStateEntry *vmstate;
 362 };
 363
 364 /* These are used for the error_status field of IDEBus */
 365 #define IDE_RETRY_MASK 0xf8
 366 #define IDE_RETRY_DMA  0x08
 367 #define IDE_RETRY_PIO  0x10
 368 #define IDE_RETRY_ATAPI 0x20 /* reused IDE_RETRY_READ bit */
 369 #define IDE_RETRY_READ  0x20
 370 #define IDE_RETRY_FLUSH 0x40
 371 #define IDE_RETRY_TRIM 0x80
 372 #define IDE_RETRY_HBA  0x100
 373
 374 #define IS_IDE_RETRY_DMA(_status) \
 375     ((_status) & IDE_RETRY_DMA)
 376
 377 #define IS_IDE_RETRY_PIO(_status) \
 378     ((_status) & IDE_RETRY_PIO)
 379
 380 /*
 381  * The method of the IDE_RETRY_ATAPI determination is to use a previously
 382  * impossible bit combination as a new status value.
 383  */
 384 #define IS_IDE_RETRY_ATAPI(_status)   \
 385     (((_status) & IDE_RETRY_MASK) == IDE_RETRY_ATAPI)
 386
 387 static inline uint8_t ide_dma_cmd_to_retry(uint8_t dma_cmd)
 388 {
 389     switch (dma_cmd) {
 390     case IDE_DMA_READ:
 391         return IDE_RETRY_DMA | IDE_RETRY_READ;
 392     case IDE_DMA_WRITE:
 393         return IDE_RETRY_DMA;
 394     case IDE_DMA_TRIM:
 395         return IDE_RETRY_DMA | IDE_RETRY_TRIM;
 396     case IDE_DMA_ATAPI:
 397         return IDE_RETRY_ATAPI;
 398     default:
 399         break;
 400     }
 401     return 0;
 402 }
 403
 404 static inline IDEState *ide_bus_active_if(IDEBus *bus)
 405 {
 406     return bus->ifs + bus->unit;
 407 }
 408
 409 /* hw/ide/core.c */
 410 extern const VMStateDescription vmstate_ide_bus;
 411
 412 #define VMSTATE_IDE_BUS(_field, _state)                          \
 413     VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_bus, IDEBus)
 414
 415 #define VMSTATE_IDE_BUS_ARRAY(_field, _state, _num)              \
 416     VMSTATE_STRUCT_ARRAY(_field, _state, _num, 1, vmstate_ide_bus, IDEBus)
 417
 418 extern const VMStateDescription vmstate_ide_drive;
 419
 420 #define VMSTATE_IDE_DRIVES(_field, _state) \
 421     VMSTATE_STRUCT_ARRAY(_field, _state, 2, 3, vmstate_ide_drive, IDEState)
 422
 423 #define VMSTATE_IDE_DRIVE(_field, _state) \
 424     VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_drive, IDEState)
 425
 426 void ide_bus_reset(IDEBus *bus);
 427 int64_t ide_get_sector(IDEState *s);
 428 void ide_set_sector(IDEState *s, int64_t sector_num);
 429
 430 void ide_start_dma(IDEState *s, BlockCompletionFunc *cb);
 431 void dma_buf_commit(IDEState *s, uint32_t tx_bytes);
 432 void ide_dma_error(IDEState *s);
 433 void ide_abort_command(IDEState *s);
 434
 435 void ide_atapi_cmd_ok(IDEState *s);
 436 void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
 437 void ide_atapi_dma_restart(IDEState *s);
 438 void ide_atapi_io_error(IDEState *s, int ret);
 439
 440 void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val);
 441 uint32_t ide_ioport_read(void *opaque, uint32_t addr1);
 442 uint32_t ide_status_read(void *opaque, uint32_t addr);
 443 void ide_ctrl_write(void *opaque, uint32_t addr, uint32_t val);
 444 void ide_data_writew(void *opaque, uint32_t addr, uint32_t val);
 445 uint32_t ide_data_readw(void *opaque, uint32_t addr);
 446 void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
 447 uint32_t ide_data_readl(void *opaque, uint32_t addr);
 448
 449 int ide_init_drive(IDEState *s, BlockBackend *blk, IDEDriveKind kind,
 450                    const char *version, const char *serial, const char *model,
 451                    uint64_t wwn,
 452                    uint32_t cylinders, uint32_t heads, uint32_t secs,
 453                    int chs_trans, Error **errp);
 454 void ide_exit(IDEState *s);
 455 void ide_bus_init_output_irq(IDEBus *bus, qemu_irq irq_out);
 456 int ide_init_ioport(IDEBus *bus, ISADevice *isa, int iobase, int iobase2);
 457 void ide_bus_set_irq(IDEBus *bus);
 458 void ide_bus_register_restart_cb(IDEBus *bus);
 459
 460 void ide_bus_exec_cmd(IDEBus *bus, uint32_t val);
 461
 462 void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
 463                         EndTransferFunc *end_transfer_func);
 464 bool ide_transfer_start_norecurse(IDEState *s, uint8_t *buf, int size,
 465                                   EndTransferFunc *end_transfer_func);
 466 void ide_transfer_stop(IDEState *s);
 467 void ide_set_inactive(IDEState *s, bool more);
 468 BlockAIOCB *ide_issue_trim(
 469         int64_t offset, QEMUIOVector *qiov,
 470         BlockCompletionFunc *cb, void *cb_opaque, void *opaque);
 471 BlockAIOCB *ide_buffered_readv(IDEState *s, int64_t sector_num,
 472                                QEMUIOVector *iov, int nb_sectors,
 473                                BlockCompletionFunc *cb, void *opaque);
 474 void ide_cancel_dma_sync(IDEState *s);
 475
 476 /* hw/ide/atapi.c */
 477 void ide_atapi_cmd(IDEState *s);
 478 void ide_atapi_cmd_reply_end(IDEState *s);
 479
 480 /* hw/ide/qdev.c */
 481 void ide_bus_init(IDEBus *idebus, size_t idebus_size, DeviceState *dev,
 482                   int bus_id, int max_units);
 483 IDEDevice *ide_bus_create_drive(IDEBus *bus, int unit, DriveInfo *drive);
 484
 485 int ide_get_geometry(BusState *bus, int unit,
 486                      int16_t *cyls, int8_t *heads, int8_t *secs);
 487 int ide_get_bios_chs_trans(BusState *bus, int unit);
 488
 489 int ide_handle_rw_error(IDEState *s, int error, int op);
 490
 491 #endif /* HW_IDE_INTERNAL_H */