Makefile

   1 # Makefile for QEMU.
   2
   3 ifneq ($(words $(subst :, ,$(CURDIR))), 1)
   4   $(error main directory cannot contain spaces nor colons)
   5 endif
   6
   7 # Always point to the root of the build tree (needs GNU make).
   8 BUILD_DIR=$(CURDIR)
   9
  10 # Before including a proper config-host.mak, assume we are in the source tree
  11 SRC_PATH=.
  12
  13 UNCHECKED_GOALS := %clean TAGS cscope ctags dist \
  14     html info pdf txt \
  15     help check-help print-% \
  16     docker docker-% vm-help vm-test vm-build-%
  17
  18 # All following code might depend on configuration variables
  19 ifneq ($(wildcard config-host.mak),)
  20 # Put the all: rule here so that config-host.mak can contain dependencies.
  21 all:
  22 include config-host.mak
  23
  24 git-submodule-update:
  25
  26 .PHONY: git-submodule-update
  27
  28 git_module_status := $(shell \
  29   cd '$(SRC_PATH)' && \
  30   GIT="$(GIT)" ./scripts/git-submodule.sh status $(GIT_SUBMODULES); \
  31   echo $$?; \
  32 )
  33
  34 ifeq (1,$(git_module_status))
  35 ifeq (no,$(GIT_UPDATE))
  36 git-submodule-update:
  37         $(call quiet-command, \
  38             echo && \
  39             echo "GIT submodule checkout is out of date. Please run" && \
  40             echo "  scripts/git-submodule.sh update $(GIT_SUBMODULES)" && \
  41             echo "from the source directory checkout $(SRC_PATH)" && \
  42             echo && \
  43             exit 1)
  44 else
  45 git-submodule-update:
  46         $(call quiet-command, \
  47           (cd $(SRC_PATH) && GIT="$(GIT)" ./scripts/git-submodule.sh update $(GIT_SUBMODULES)), \
  48           "GIT","$(GIT_SUBMODULES)")
  49 endif
  50 endif
  51
  52 export NINJA=./ninjatool
  53
  54 # Running meson regenerates both build.ninja and ninjatool, and that is
  55 # enough to prime the rest of the build.
  56 ninjatool: build.ninja
  57
  58 # Only needed in case Makefile.ninja does not exist.
  59 .PHONY: ninja-clean ninja-distclean clean-ctlist
  60 clean-ctlist:
  61 ninja-clean::
  62 ninja-distclean::
  63 build.ninja: config-host.mak
  64
  65 Makefile.ninja: build.ninja ninjatool
  66         ./ninjatool -t ninja2make --omit clean dist uninstall < $< > $@
  67 -include Makefile.ninja
  68
  69 ${ninja-targets-c_COMPILER} ${ninja-targets-cpp_COMPILER}: .var.command += -MP
  70
  71 # If MESON is empty, the rule will be re-evaluated after Makefiles are
  72 # reread (and MESON won't be empty anymore).
  73 ifneq ($(MESON),)
  74 Makefile.mtest: build.ninja scripts/mtest2make.py
  75         $(MESON) introspect --tests | $(PYTHON) scripts/mtest2make.py > $@
  76 -include Makefile.mtest
  77 endif
  78
  79 .git-submodule-status: git-submodule-update config-host.mak
  80
  81 # Check that we're not trying to do an out-of-tree build from
  82 # a tree that's been used for an in-tree build.
  83 ifneq ($(realpath $(SRC_PATH)),$(realpath .))
  84 ifneq ($(wildcard $(SRC_PATH)/config-host.mak),)
  85 $(error This is an out of tree build but your source tree ($(SRC_PATH)) \
  86 seems to have been used for an in-tree build. You can fix this by running \
  87 "$(MAKE) distclean && rm -rf *-linux-user *-softmmu" in your source tree)
  88 endif
  89 endif
  90
  91 CONFIG_SOFTMMU := $(if $(filter %-softmmu,$(TARGET_DIRS)),y)
  92 CONFIG_USER_ONLY := $(if $(filter %-user,$(TARGET_DIRS)),y)
  93 CONFIG_XEN := $(CONFIG_XEN_BACKEND)
  94 CONFIG_ALL=y
  95 -include config-all-devices.mak
  96 -include config-all-disas.mak
  97
  98 config-host.mak: $(SRC_PATH)/configure $(SRC_PATH)/pc-bios $(SRC_PATH)/VERSION
  99         @echo $@ is out-of-date, running configure
 100         @if test -f meson-private/coredata.dat; then \
 101           ./config.status --skip-meson; \
 102         else \
 103           ./config.status; \
 104         fi
 105
 106 # Force configure to re-run if the API symbols are updated
 107 ifeq ($(CONFIG_PLUGIN),y)
 108 config-host.mak: $(SRC_PATH)/plugins/qemu-plugins.symbols
 109 endif
 110
 111 else
 112 config-host.mak:
 113 ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
 114         @echo "Please call configure before running make!"
 115         @exit 1
 116 endif
 117 endif
 118
 119 include $(SRC_PATH)/rules.mak
 120
 121 # lor is defined in rules.mak
 122 CONFIG_BLOCK := $(call lor,$(CONFIG_SOFTMMU),$(CONFIG_TOOLS))
 123
 124 generated-files-y = config-host.h
 125
 126 generated-files-y += module_block.h
 127
 128 generated-files-y += .git-submodule-status
 129
 130 # Don't try to regenerate Makefile or configure
 131 # We don't generate any of them
 132 Makefile: ;
 133 configure: ;
 134
 135 .PHONY: all clean cscope distclean html info install install-doc \
 136         pdf txt recurse-all dist msi FORCE
 137
 138 $(call set-vpath, $(SRC_PATH))
 139
 140 LIBS+=-lz $(LIBS_TOOLS)
 141
 142 HELPERS-y = $(HELPERS)
 143
 144 # Sphinx does not allow building manuals into the same directory as
 145 # the source files, so if we're doing an in-tree QEMU build we must
 146 # build the manuals into a subdirectory (and then install them from
 147 # there for 'make install'). For an out-of-tree build we can just
 148 # use the docs/ subdirectory in the build tree as normal.
 149 ifeq ($(realpath $(SRC_PATH)),$(realpath .))
 150 MANUAL_BUILDDIR := docs/built
 151 else
 152 MANUAL_BUILDDIR := docs
 153 endif
 154
 155 ifdef BUILD_DOCS
 156 DOCS+=$(MANUAL_BUILDDIR)/system/qemu.1
 157 DOCS+=$(MANUAL_BUILDDIR)/tools/qemu-img.1
 158 DOCS+=$(MANUAL_BUILDDIR)/tools/qemu-nbd.8
 159 DOCS+=$(MANUAL_BUILDDIR)/interop/qemu-ga.8
 160 ifeq ($(CONFIG_LINUX)$(CONFIG_SECCOMP)$(CONFIG_LIBCAP_NG),yyy)
 161 DOCS+=$(MANUAL_BUILDDIR)/tools/virtiofsd.1
 162 endif
 163 DOCS+=$(MANUAL_BUILDDIR)/system/qemu-block-drivers.7
 164 DOCS+=docs/interop/qemu-qmp-ref.html docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7
 165 DOCS+=docs/interop/qemu-ga-ref.html docs/interop/qemu-ga-ref.txt docs/interop/qemu-ga-ref.7
 166 DOCS+=$(MANUAL_BUILDDIR)/system/qemu-cpu-models.7
 167 DOCS+=$(MANUAL_BUILDDIR)/index.html
 168 ifdef CONFIG_VIRTFS
 169 DOCS+=$(MANUAL_BUILDDIR)/tools/virtfs-proxy-helper.1
 170 endif
 171 ifdef CONFIG_TRACE_SYSTEMTAP
 172 DOCS+=$(MANUAL_BUILDDIR)/tools/qemu-trace-stap.1
 173 endif
 174 else
 175 DOCS=
 176 endif
 177
 178 SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory --quiet) BUILD_DIR=$(BUILD_DIR)
 179 SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(filter %-softmmu, $(TARGET_DIRS)))
 180 SUBDIR_DEVICES_MAK_DEP=$(patsubst %, %.d, $(SUBDIR_DEVICES_MAK))
 181
 182 ifeq ($(SUBDIR_DEVICES_MAK),)
 183 config-all-devices.mak: config-host.mak
 184         $(call quiet-command,echo '# no devices' > $@,"GEN","$@")
 185 else
 186 config-all-devices.mak: $(SUBDIR_DEVICES_MAK) config-host.mak
 187         $(call quiet-command, sed -n \
 188              's|^\([^=]*\)=\(.*\)$$|\1:=$$(findstring y,$$(\1)\2)|p' \
 189              $(SUBDIR_DEVICES_MAK) | sort -u > $@, \
 190              "GEN","$@")
 191 endif
 192
 193 -include $(SUBDIR_DEVICES_MAK_DEP)
 194
 195 # This has to be kept in sync with Kconfig.host.
 196 MINIKCONF_ARGS = \
 197     $(CONFIG_MINIKCONF_MODE) \
 198     $@ $*/config-devices.mak.d $< $(SRC_PATH)/Kconfig \
 199     CONFIG_TCG=$(CONFIG_TCG) \
 200     CONFIG_KVM=$(CONFIG_KVM) \
 201     CONFIG_SPICE=$(CONFIG_SPICE) \
 202     CONFIG_IVSHMEM=$(CONFIG_IVSHMEM) \
 203     CONFIG_TPM=$(CONFIG_TPM) \
 204     CONFIG_XEN=$(CONFIG_XEN) \
 205     CONFIG_OPENGL=$(CONFIG_OPENGL) \
 206     CONFIG_X11=$(CONFIG_X11) \
 207     CONFIG_VHOST_USER=$(CONFIG_VHOST_USER) \
 208     CONFIG_VHOST_KERNEL=$(CONFIG_VHOST_KERNEL) \
 209     CONFIG_VIRTFS=$(CONFIG_VIRTFS) \
 210     CONFIG_LINUX=$(CONFIG_LINUX) \
 211     CONFIG_PVRDMA=$(CONFIG_PVRDMA)
 212
 213 MINIKCONF = $(PYTHON) $(SRC_PATH)/scripts/minikconf.py
 214
 215 $(SUBDIR_DEVICES_MAK): %/config-devices.mak: default-configs/%.mak $(SRC_PATH)/Kconfig $(BUILD_DIR)/config-host.mak
 216         $(call quiet-command, $(MINIKCONF) $(MINIKCONF_ARGS) \
 217                 > $@.tmp, "GEN", "$@.tmp")
 218         $(call quiet-command, if test -f $@; then \
 219           if cmp -s $@.old $@; then \
 220             mv $@.tmp $@; \
 221             cp -p $@ $@.old; \
 222           else \
 223             if test -f $@.old; then \
 224               echo "WARNING: $@ (user modified) out of date.";\
 225             else \
 226               echo "WARNING: $@ out of date.";\
 227             fi; \
 228             echo "Run \"$(MAKE) defconfig\" to regenerate."; \
 229             rm $@.tmp; \
 230           fi; \
 231          else \
 232           mv $@.tmp $@; \
 233           cp -p $@ $@.old; \
 234          fi,"GEN","$@");
 235
 236 defconfig:
 237         rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK)
 238
 239 ifneq ($(wildcard config-host.mak),)
 240 include $(SRC_PATH)/Makefile.objs
 241 endif
 242
 243 dummy := $(call unnest-vars,, \
 244                 chardev-obj-y \
 245                 block-obj-y \
 246                 block-obj-m \
 247                 storage-daemon-obj-y \
 248                 storage-daemon-obj-m \
 249                 crypto-obj-y \
 250                 io-obj-y \
 251                 common-obj-y \
 252                 common-obj-m)
 253
 254 include $(SRC_PATH)/tests/Makefile.include
 255
 256 all: $(DOCS) $(if $(BUILD_DOCS),sphinxdocs) $(TOOLS) $(HELPERS-y) recurse-all modules
 257
 258 config-host.h: config-host.h-timestamp
 259 config-host.h-timestamp: config-host.mak
 260
 261 TARGET_DIRS_RULES := $(foreach t, all fuzz clean install, $(addsuffix /$(t), $(TARGET_DIRS)))
 262
 263 SOFTMMU_ALL_RULES=$(filter %-softmmu/all, $(TARGET_DIRS_RULES))
 264 $(SOFTMMU_ALL_RULES): $(authz-obj-y)
 265 $(SOFTMMU_ALL_RULES): $(block-obj-y)
 266 $(SOFTMMU_ALL_RULES): $(storage-daemon-obj-y)
 267 $(SOFTMMU_ALL_RULES): $(chardev-obj-y)
 268 $(SOFTMMU_ALL_RULES): $(crypto-obj-y)
 269 $(SOFTMMU_ALL_RULES): $(io-obj-y)
 270 $(SOFTMMU_ALL_RULES): $(qom-obj-y)
 271 $(SOFTMMU_ALL_RULES): config-all-devices.mak
 272
 273 SOFTMMU_FUZZ_RULES=$(filter %-softmmu/fuzz, $(TARGET_DIRS_RULES))
 274 $(SOFTMMU_FUZZ_RULES): $(authz-obj-y)
 275 $(SOFTMMU_FUZZ_RULES): $(block-obj-y)
 276 $(SOFTMMU_FUZZ_RULES): $(chardev-obj-y)
 277 $(SOFTMMU_FUZZ_RULES): $(crypto-obj-y)
 278 $(SOFTMMU_FUZZ_RULES): $(io-obj-y)
 279 $(SOFTMMU_FUZZ_RULES): config-all-devices.mak
 280 $(SOFTMMU_FUZZ_RULES): $(edk2-decompressed)
 281
 282 .PHONY: $(TARGET_DIRS_RULES)
 283 # The $(TARGET_DIRS_RULES) are of the form SUBDIR/GOAL, so that
 284 # $(dir $@) yields the sub-directory, and $(notdir $@) yields the sub-goal
 285 $(TARGET_DIRS_RULES):
 286         $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)" TARGET_DIR="$(dir $@)" $(notdir $@),)
 287
 288 # LIBFDT_lib="": avoid breaking existing trees with objects requiring -fPIC
 289 DTC_MAKE_ARGS=-I$(SRC_PATH)/dtc VPATH=$(SRC_PATH)/dtc -C dtc V="$(V)" LIBFDT_lib=""
 290 DTC_CFLAGS=$(CFLAGS) $(QEMU_CFLAGS)
 291 DTC_CPPFLAGS=-I$(SRC_PATH)/dtc/libfdt
 292
 293 .PHONY: dtc/all
 294 dtc/all: .git-submodule-status dtc/libfdt
 295         $(call quiet-command,$(MAKE) $(DTC_MAKE_ARGS) CPPFLAGS="$(DTC_CPPFLAGS)" CFLAGS="$(DTC_CFLAGS)" LDFLAGS="$(QEMU_LDFLAGS)" ARFLAGS="$(ARFLAGS)" CC="$(CC)" AR="$(AR)" LD="$(LD)" $(SUBDIR_MAKEFLAGS) libfdt,)
 296
 297 dtc/%: .git-submodule-status
 298         @mkdir -p $@
 299
 300 # Overriding CFLAGS causes us to lose defines added in the sub-makefile.
 301 # Not overriding CFLAGS leads to mis-matches between compilation modes.
 302 # Therefore we replicate some of the logic in the sub-makefile.
 303 # Remove all the extra -Warning flags that QEMU uses that Capstone doesn't;
 304 # no need to annoy QEMU developers with such things.
 305 CAP_CFLAGS = $(patsubst -W%,,$(CFLAGS) $(QEMU_CFLAGS))
 306 CAP_CFLAGS += -DCAPSTONE_USE_SYS_DYN_MEM
 307 CAP_CFLAGS += -DCAPSTONE_HAS_ARM
 308 CAP_CFLAGS += -DCAPSTONE_HAS_ARM64
 309 CAP_CFLAGS += -DCAPSTONE_HAS_POWERPC
 310 CAP_CFLAGS += -DCAPSTONE_HAS_X86
 311
 312 .PHONY: capstone/all
 313 capstone/all: .git-submodule-status
 314         $(call quiet-command,$(MAKE) -C $(SRC_PATH)/capstone CAPSTONE_SHARED=no BUILDDIR="$(BUILD_DIR)/capstone" CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" CFLAGS="$(CAP_CFLAGS)" $(SUBDIR_MAKEFLAGS) $(BUILD_DIR)/capstone/$(LIBCAPSTONE))
 315
 316 .PHONY: slirp/all
 317 slirp/all: .git-submodule-status
 318         $(call quiet-command,$(MAKE) -C $(SRC_PATH)/slirp               \
 319                 BUILD_DIR="$(BUILD_DIR)/slirp"                  \
 320                 PKG_CONFIG="$(PKG_CONFIG)"                              \
 321                 CC="$(CC)" AR="$(AR)"   LD="$(LD)" RANLIB="$(RANLIB)"   \
 322                 CFLAGS="$(QEMU_CFLAGS) $(CFLAGS)" LDFLAGS="$(QEMU_LDFLAGS)")
 323
 324 $(filter %/all, $(TARGET_DIRS_RULES)): libqemuutil.a $(common-obj-y) \
 325         $(qom-obj-y)
 326
 327 $(filter %/fuzz, $(TARGET_DIRS_RULES)): libqemuutil.a $(common-obj-y) \
 328         $(qom-obj-y) $(crypto-user-obj-$(CONFIG_USER_ONLY))
 329
 330 ROM_DIRS = $(addprefix pc-bios/, $(ROMS))
 331 ROM_DIRS_RULES=$(foreach t, all clean, $(addsuffix /$(t), $(ROM_DIRS)))
 332 # Only keep -O and -g cflags
 333 .PHONY: $(ROM_DIRS_RULES)
 334 $(ROM_DIRS_RULES):
 335         $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)" TARGET_DIR="$(dir $@)" CFLAGS="$(filter -O% -g%,$(CFLAGS))" $(notdir $@),)
 336
 337 .PHONY: recurse-all recurse-clean recurse-install
 338 recurse-all: $(addsuffix /all, $(TARGET_DIRS) $(ROM_DIRS))
 339 recurse-clean: $(addsuffix /clean, $(TARGET_DIRS) $(ROM_DIRS))
 340 recurse-install: $(addsuffix /install, $(TARGET_DIRS))
 341 $(addsuffix /install, $(TARGET_DIRS)): all
 342
 343 $(BUILD_DIR)/version.o: $(SRC_PATH)/version.rc config-host.h
 344         $(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@ $<,"RC","version.o")
 345
 346 Makefile: $(version-obj-y)
 347
 348 ######################################################################
 349
 350 COMMON_LDADDS = libqemuutil.a
 351
 352 qemu-img.o: qemu-img-cmds.h
 353
 354 qemu-img$(EXESUF): qemu-img.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 355 qemu-nbd$(EXESUF): qemu-nbd.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 356 qemu-io$(EXESUF): qemu-io.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 357 qemu-storage-daemon$(EXESUF): qemu-storage-daemon.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(chardev-obj-y) $(io-obj-y) $(qom-obj-y) $(storage-daemon-obj-y) $(COMMON_LDADDS)
 358
 359 scsi/qemu-pr-helper$(EXESUF): scsi/qemu-pr-helper.o scsi/utils.o $(authz-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 360 ifdef CONFIG_MPATH
 361 scsi/qemu-pr-helper$(EXESUF): LIBS += -ludev -lmultipath -lmpathpersist
 362 endif
 363
 364 module_block.h: $(SRC_PATH)/scripts/modules/module_block.py config-host.mak
 365         $(call quiet-command,$(PYTHON) $< $@ \
 366         $(addprefix $(SRC_PATH)/,$(patsubst %.mo,%.c,$(block-obj-m))), \
 367         "GEN","$@")
 368
 369 clean: recurse-clean ninja-clean clean-ctlist
 370         -test -f ninjatool && ./ninjatool $(if $(V),-v,) -t clean
 371 # avoid old build problems by removing potentially incorrect old files
 372         rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
 373         rm -f qemu-options.def
 374         find . \( -name '*.so' -o -name '*.dll' -o -name '*.mo' -o -name '*.[oda]' \) -type f \
 375                 ! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-aarch64.a \
 376                 ! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-arm.a \
 377                 ! -path ./roms/edk2/BaseTools/Source/Python/UPT/Dll/sqlite3.dll \
 378                 -exec rm {} +
 379         rm -f $(filter-out %.tlb,$(TOOLS)) $(HELPERS-y) TAGS cscope.* *.pod *~ */*~
 380         rm -f fsdev/*.pod scsi/*.pod
 381         rm -f $(foreach f,$(generated-files-y),$(f) $(f)-timestamp)
 382         rm -f config-all-devices.mak
 383         rm -f $(SUBDIR_DEVICES_MAK)
 384
 385 VERSION ?= $(shell cat VERSION)
 386
 387 dist: qemu-$(VERSION).tar.bz2
 388
 389 qemu-%.tar.bz2:
 390         $(SRC_PATH)/scripts/make-release "$(SRC_PATH)" "$(patsubst qemu-%.tar.bz2,%,$@)"
 391
 392 define clean-manual =
 393 rm -rf $(MANUAL_BUILDDIR)/$1/_static
 394 rm -f $(MANUAL_BUILDDIR)/$1/objects.inv $(MANUAL_BUILDDIR)/$1/searchindex.js $(MANUAL_BUILDDIR)/$1/*.html
 395 endef
 396
 397 distclean: clean ninja-distclean
 398         -test -f ninjatool && ./ninjatool $(if $(V),-v,) -t clean -g
 399         rm -f config-host.mak config-host.h* $(DOCS)
 400         rm -f tests/tcg/config-*.mak
 401         rm -f config-all-devices.mak config-all-disas.mak config.status
 402         rm -f $(SUBDIR_DEVICES_MAK)
 403         rm -f po/*.mo tests/qemu-iotests/common.env
 404         rm -f roms/seabios/config.mak roms/vgabios/config.mak
 405         rm -f qemu-plugins-ld.symbols qemu-plugins-ld64.symbols
 406         rm -rf meson-private meson-logs meson-info compile_commands.json
 407         rm -f Makefile.ninja ninjatool ninjatool.stamp Makefile.mtest
 408         rm -f config.log
 409         rm -f linux-headers/asm
 410         rm -f docs/version.texi
 411         rm -f docs/interop/qemu-ga-qapi.texi docs/interop/qemu-qmp-qapi.texi
 412         rm -f docs/interop/qemu-qmp-ref.7 docs/interop/qemu-ga-ref.7
 413         rm -f docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt
 414         rm -f docs/interop/qemu-qmp-ref.pdf docs/interop/qemu-ga-ref.pdf
 415         rm -f docs/interop/qemu-qmp-ref.html docs/interop/qemu-ga-ref.html
 416         rm -rf .doctrees
 417         $(call clean-manual,devel)
 418         $(call clean-manual,interop)
 419         $(call clean-manual,specs)
 420         $(call clean-manual,system)
 421         $(call clean-manual,tools)
 422         $(call clean-manual,user)
 423         for d in $(TARGET_DIRS); do \
 424         rm -rf $$d || exit 1 ; \
 425         done
 426         rm -Rf .sdk
 427
 428 KEYMAPS=da     en-gb  et  fr     fr-ch  is  lt  no  pt-br  sv \
 429 ar      de     en-us  fi  fr-be  hr     it  lv  nl         pl  ru     th \
 430 de-ch  es     fo  fr-ca  hu     ja  mk  pt  sl     tr \
 431 bepo    cz
 432
 433 ifdef INSTALL_BLOBS
 434 BLOBS=bios.bin bios-256k.bin bios-microvm.bin sgabios.bin vgabios.bin vgabios-cirrus.bin \
 435 vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin vgabios-virtio.bin \
 436 vgabios-ramfb.bin vgabios-bochs-display.bin vgabios-ati.bin \
 437 openbios-sparc32 openbios-sparc64 openbios-ppc QEMU,tcx.bin QEMU,cgthree.bin \
 438 pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom \
 439 pxe-pcnet.rom pxe-rtl8139.rom pxe-virtio.rom \
 440 efi-e1000.rom efi-eepro100.rom efi-ne2k_pci.rom \
 441 efi-pcnet.rom efi-rtl8139.rom efi-virtio.rom \
 442 efi-e1000e.rom efi-vmxnet3.rom \
 443 qemu-nsis.bmp \
 444 bamboo.dtb canyonlands.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
 445 multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin pvh.bin \
 446 s390-ccw.img s390-netboot.img \
 447 slof.bin skiboot.lid \
 448 palcode-clipper \
 449 u-boot.e500 u-boot-sam460-20100605.bin \
 450 qemu_vga.ndrv \
 451 edk2-licenses.txt \
 452 hppa-firmware.img \
 453 opensbi-riscv32-sifive_u-fw_jump.bin opensbi-riscv32-virt-fw_jump.bin \
 454 opensbi-riscv64-sifive_u-fw_jump.bin opensbi-riscv64-virt-fw_jump.bin
 455 else
 456 BLOBS=
 457 endif
 458
 459 # Note that we manually filter-out the non-Sphinx documentation which
 460 # is currently built into the docs/interop directory in the build tree,
 461 # and also any sphinx-built manpages.
 462 define install-manual =
 463 for d in $$(cd $(MANUAL_BUILDDIR) && find $1 -type d); do $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)/$$d"; done
 464 for f in $$(cd $(MANUAL_BUILDDIR) && find $1 -type f -a '!' '(' -name '*.[0-9]' -o -name 'qemu-*-qapi.*' -o -name 'qemu-*-ref.*' ')' ); do $(INSTALL_DATA) "$(MANUAL_BUILDDIR)/$$f" "$(DESTDIR)$(qemu_docdir)/$$f"; done
 465 endef
 466
 467 # Note that we deliberately do not install the "devel" manual: it is
 468 # for QEMU developers, and not interesting to our users.
 469 .PHONY: install-sphinxdocs
 470 install-sphinxdocs: sphinxdocs
 471         $(call install-manual,interop)
 472         $(call install-manual,specs)
 473         $(call install-manual,system)
 474         $(call install-manual,tools)
 475         $(call install-manual,user)
 476
 477 install-doc: $(DOCS) install-sphinxdocs
 478         $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)"
 479         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/index.html "$(DESTDIR)$(qemu_docdir)"
 480         $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)/interop"
 481         $(INSTALL_DATA) docs/interop/qemu-qmp-ref.html "$(DESTDIR)$(qemu_docdir)/interop"
 482         $(INSTALL_DATA) docs/interop/qemu-qmp-ref.txt "$(DESTDIR)$(qemu_docdir)/interop"
 483 ifdef CONFIG_POSIX
 484         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
 485         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/system/qemu.1 "$(DESTDIR)$(mandir)/man1"
 486         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man7"
 487         $(INSTALL_DATA) docs/interop/qemu-qmp-ref.7 "$(DESTDIR)$(mandir)/man7"
 488         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/system/qemu-block-drivers.7 "$(DESTDIR)$(mandir)/man7"
 489         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/system/qemu-cpu-models.7 "$(DESTDIR)$(mandir)/man7"
 490 ifeq ($(CONFIG_TOOLS),y)
 491         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/qemu-img.1 "$(DESTDIR)$(mandir)/man1"
 492         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
 493         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
 494 endif
 495 ifdef CONFIG_TRACE_SYSTEMTAP
 496         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/qemu-trace-stap.1 "$(DESTDIR)$(mandir)/man1"
 497 endif
 498 ifeq ($(CONFIG_GUEST_AGENT),y)
 499         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/interop/qemu-ga.8 "$(DESTDIR)$(mandir)/man8"
 500         $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)/interop"
 501         $(INSTALL_DATA) docs/interop/qemu-ga-ref.html "$(DESTDIR)$(qemu_docdir)/interop"
 502         $(INSTALL_DATA) docs/interop/qemu-ga-ref.txt "$(DESTDIR)$(qemu_docdir)/interop"
 503         $(INSTALL_DATA) docs/interop/qemu-ga-ref.7 "$(DESTDIR)$(mandir)/man7"
 504 endif
 505 endif
 506 ifdef CONFIG_VIRTFS
 507         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
 508         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/virtfs-proxy-helper.1 "$(DESTDIR)$(mandir)/man1"
 509 endif
 510 ifeq ($(CONFIG_LINUX)$(CONFIG_SECCOMP)$(CONFIG_LIBCAP_NG),yyy)
 511         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/virtiofsd.1 "$(DESTDIR)$(mandir)/man1"
 512 endif
 513
 514 install-datadir:
 515         $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)"
 516
 517 install-localstatedir:
 518 ifdef CONFIG_POSIX
 519 ifeq ($(CONFIG_GUEST_AGENT),y)
 520         $(INSTALL_DIR) "$(DESTDIR)$(qemu_localstatedir)"/run
 521 endif
 522 endif
 523
 524 ICON_SIZES=16x16 24x24 32x32 48x48 64x64 128x128 256x256 512x512
 525
 526 install-includedir:
 527         $(INSTALL_DIR) "$(DESTDIR)$(includedir)"
 528
 529 # Needed by "meson install"
 530 export DESTDIR
 531 install: all $(if $(BUILD_DOCS),install-doc) \
 532         install-datadir install-localstatedir install-includedir \
 533         recurse-install
 534 ifneq ($(TOOLS),)
 535         $(call install-prog,$(TOOLS),$(DESTDIR)$(bindir))
 536 endif
 537 ifneq ($(CONFIG_MODULES),)
 538         $(INSTALL_DIR) "$(DESTDIR)$(qemu_moddir)"
 539         for s in $(modules-m:.mo=$(DSOSUF)); do \
 540                 t="$(DESTDIR)$(qemu_moddir)/$$(echo $$s | tr / -)"; \
 541                 $(INSTALL_LIB) $$s "$$t"; \
 542                 test -z "$(STRIP)" || $(STRIP) "$$t"; \
 543         done
 544 endif
 545 ifneq ($(HELPERS-y),)
 546         $(call install-prog,$(HELPERS-y),$(DESTDIR)$(libexecdir))
 547 endif
 548 ifdef CONFIG_TRACE_SYSTEMTAP
 549         $(INSTALL_PROG) "scripts/qemu-trace-stap" $(DESTDIR)$(bindir)
 550 endif
 551 ifneq ($(BLOBS),)
 552         set -e; for x in $(BLOBS); do \
 553                 $(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(qemu_datadir)"; \
 554         done
 555 endif
 556         for s in $(ICON_SIZES); do \
 557                 mkdir -p "$(DESTDIR)$(qemu_icondir)/hicolor/$${s}/apps"; \
 558                 $(INSTALL_DATA) $(SRC_PATH)/ui/icons/qemu_$${s}.png \
 559                         "$(DESTDIR)$(qemu_icondir)/hicolor/$${s}/apps/qemu.png"; \
 560         done; \
 561         mkdir -p "$(DESTDIR)$(qemu_icondir)/hicolor/32x32/apps"; \
 562         $(INSTALL_DATA) $(SRC_PATH)/ui/icons/qemu_32x32.bmp \
 563                 "$(DESTDIR)$(qemu_icondir)/hicolor/32x32/apps/qemu.bmp"; \
 564         mkdir -p "$(DESTDIR)$(qemu_icondir)/hicolor/scalable/apps"; \
 565         $(INSTALL_DATA) $(SRC_PATH)/ui/icons/qemu.svg \
 566                 "$(DESTDIR)$(qemu_icondir)/hicolor/scalable/apps/qemu.svg"
 567         mkdir -p "$(DESTDIR)$(qemu_desktopdir)"
 568         $(INSTALL_DATA) $(SRC_PATH)/ui/qemu.desktop \
 569                 "$(DESTDIR)$(qemu_desktopdir)/qemu.desktop"
 570 ifdef CONFIG_GTK
 571         $(MAKE) -C po $@
 572 endif
 573 ifeq ($(CONFIG_PLUGIN),y)
 574         $(INSTALL_DATA) $(SRC_PATH)/include/qemu/qemu-plugin.h "$(DESTDIR)$(includedir)/qemu-plugin.h"
 575 endif
 576         $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/keymaps"
 577         set -e; for x in $(KEYMAPS); do \
 578                 $(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(qemu_datadir)/keymaps"; \
 579         done
 580         for d in $(TARGET_DIRS); do \
 581         $(MAKE) $(SUBDIR_MAKEFLAGS) TARGET_DIR=$$d/ -C $$d $@ || exit 1 ; \
 582         done
 583
 584 # documentation
 585 MAKEINFO=makeinfo
 586 MAKEINFOINCLUDES= -I docs -I $(<D) -I $(@D)
 587 MAKEINFOFLAGS=--no-split --number-sections $(MAKEINFOINCLUDES)
 588 TEXI2PODFLAGS=$(MAKEINFOINCLUDES) -DVERSION="$(VERSION)" -DCONFDIR="$(qemu_confdir)"
 589 TEXI2PDFFLAGS=$(if $(V),,--quiet) -I $(SRC_PATH) $(MAKEINFOINCLUDES)
 590
 591 docs/version.texi: $(SRC_PATH)/VERSION config-host.mak
 592         $(call quiet-command,(\
 593                 echo "@set VERSION $(VERSION)" && \
 594                 echo "@set CONFDIR $(qemu_confdir)" \
 595         )> $@,"GEN","$@")
 596
 597 %.html: %.texi docs/version.texi
 598         $(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --no-headers \
 599         --html $< -o $@,"GEN","$@")
 600
 601 %.info: %.texi docs/version.texi
 602         $(call quiet-command,$(MAKEINFO) $(MAKEINFOFLAGS) $< -o $@,"GEN","$@")
 603
 604 %.txt: %.texi docs/version.texi
 605         $(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --no-headers \
 606         --plaintext $< -o $@,"GEN","$@")
 607
 608 %.pdf: %.texi docs/version.texi
 609         $(call quiet-command,texi2pdf $(TEXI2PDFFLAGS) $< -o $@,"GEN","$@")
 610
 611 # Sphinx builds all its documentation at once in one invocation
 612 # and handles "don't rebuild things unless necessary" itself.
 613 # The '.doctrees' files are cached information to speed this up.
 614 .PHONY: sphinxdocs
 615 sphinxdocs: $(MANUAL_BUILDDIR)/devel/index.html \
 616             $(MANUAL_BUILDDIR)/interop/index.html \
 617             $(MANUAL_BUILDDIR)/specs/index.html \
 618             $(MANUAL_BUILDDIR)/system/index.html \
 619             $(MANUAL_BUILDDIR)/tools/index.html \
 620             $(MANUAL_BUILDDIR)/user/index.html
 621
 622 # Canned command to build a single manual
 623 # Arguments: $1 = manual name, $2 = Sphinx builder ('html' or 'man')
 624 # Note the use of different doctree for each (manual, builder) tuple;
 625 # this works around Sphinx not handling parallel invocation on
 626 # a single doctree: https://github.com/sphinx-doc/sphinx/issues/2946
 627 build-manual = $(call quiet-command,CONFDIR="$(qemu_confdir)" $(SPHINX_BUILD) $(if $(V),,-q) $(SPHINX_WERROR) -b $2 -D version=$(VERSION) -D release="$(FULL_VERSION)" -d .doctrees/$1-$2 $(SRC_PATH)/docs/$1 $(MANUAL_BUILDDIR)/$1 ,"SPHINX","$(MANUAL_BUILDDIR)/$1")
 628 # We assume all RST files in the manual's directory are used in it
 629 manual-deps = $(wildcard $(SRC_PATH)/docs/$1/*.rst $(SRC_PATH)/docs/$1/*/*.rst) \
 630               $(SRC_PATH)/docs/defs.rst.inc \
 631               $(SRC_PATH)/docs/$1/conf.py $(SRC_PATH)/docs/conf.py \
 632               $(SRC_PATH)/docs/sphinx/*.py
 633 # Macro to write out the rule and dependencies for building manpages
 634 # Usage: $(call define-manpage-rule,manualname,manpage1 manpage2...[,extradeps])
 635 # 'extradeps' is optional, and specifies extra files (eg .hx files) that
 636 # the manual page depends on.
 637 define define-manpage-rule
 638 $(call atomic,$(foreach manpage,$2,$(MANUAL_BUILDDIR)/$1/$(manpage)),$(call manual-deps,$1) $3)
 639         $(call build-manual,$1,man)
 640 endef
 641
 642 $(MANUAL_BUILDDIR)/devel/index.html: $(call manual-deps,devel)
 643         $(call build-manual,devel,html)
 644
 645 $(MANUAL_BUILDDIR)/interop/index.html: $(call manual-deps,interop)
 646         $(call build-manual,interop,html)
 647
 648 $(MANUAL_BUILDDIR)/specs/index.html: $(call manual-deps,specs)
 649         $(call build-manual,specs,html)
 650
 651 $(MANUAL_BUILDDIR)/system/index.html: $(call manual-deps,system) $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/qemu-options.hx
 652         $(call build-manual,system,html)
 653
 654 $(MANUAL_BUILDDIR)/tools/index.html: $(call manual-deps,tools) $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/docs/qemu-option-trace.rst.inc
 655         $(call build-manual,tools,html)
 656
 657 $(MANUAL_BUILDDIR)/user/index.html: $(call manual-deps,user)
 658         $(call build-manual,user,html)
 659
 660 $(call define-manpage-rule,interop,qemu-ga.8)
 661
 662 $(call define-manpage-rule,system,qemu.1 qemu-block-drivers.7 qemu-cpu-models.7)
 663
 664 $(call define-manpage-rule,tools,\
 665        qemu-img.1 qemu-nbd.8 qemu-trace-stap.1\
 666        virtiofsd.1 virtfs-proxy-helper.1,\
 667        $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/docs/qemu-option-trace.rst.inc)
 668
 669 $(MANUAL_BUILDDIR)/index.html: $(SRC_PATH)/docs/index.html.in qemu-version.h
 670         @mkdir -p "$(MANUAL_BUILDDIR)"
 671         $(call quiet-command, sed "s|@@VERSION@@|${VERSION}|g" $< >$@, \
 672              "GEN","$@")
 673
 674 docs/interop/qemu-qmp-qapi.texi: qapi/qapi-doc.texi
 675         @cp -p $< $@
 676
 677 docs/interop/qemu-ga-qapi.texi: qga/qga-qapi-doc.texi
 678         @cp -p $< $@
 679
 680 html: docs/interop/qemu-qmp-ref.html docs/interop/qemu-ga-ref.html sphinxdocs
 681 info: docs/interop/qemu-qmp-ref.info docs/interop/qemu-ga-ref.info
 682 pdf: docs/interop/qemu-qmp-ref.pdf docs/interop/qemu-ga-ref.pdf
 683 txt: docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt
 684
 685 docs/interop/qemu-ga-ref.dvi docs/interop/qemu-ga-ref.html \
 686     docs/interop/qemu-ga-ref.info docs/interop/qemu-ga-ref.pdf \
 687     docs/interop/qemu-ga-ref.txt docs/interop/qemu-ga-ref.7: \
 688         docs/interop/qemu-ga-ref.texi docs/interop/qemu-ga-qapi.texi
 689
 690 docs/interop/qemu-qmp-ref.dvi docs/interop/qemu-qmp-ref.html \
 691     docs/interop/qemu-qmp-ref.info docs/interop/qemu-qmp-ref.pdf \
 692     docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7: \
 693         docs/interop/qemu-qmp-ref.texi docs/interop/qemu-qmp-qapi.texi
 694
 695 $(filter %.1 %.7 %.8,$(DOCS)): scripts/texi2pod.pl
 696
 697 # Reports/Analysis
 698
 699 %/coverage-report.html:
 700         @mkdir -p $*
 701         $(call quiet-command,\
 702                 gcovr -r $(SRC_PATH) \
 703                 $(foreach t, $(TARGET_DIRS), --object-directory $(BUILD_DIR)/$(t)) \
 704                  --object-directory $(BUILD_DIR) \
 705                 -p --html --html-details -o $@, \
 706                 "GEN", "coverage-report.html")
 707
 708 .PHONY: coverage-report
 709 coverage-report: $(CURDIR)/reports/coverage/coverage-report.html
 710
 711 ifdef CONFIG_WIN32
 712
 713 INSTALLER = qemu-setup-$(VERSION)$(EXESUF)
 714
 715 nsisflags = -V2 -NOCD
 716
 717 ifneq ($(wildcard $(SRC_PATH)/dll),)
 718 ifeq ($(ARCH),x86_64)
 719 # 64 bit executables
 720 DLL_PATH = $(SRC_PATH)/dll/w64
 721 nsisflags += -DW64
 722 else
 723 # 32 bit executables
 724 DLL_PATH = $(SRC_PATH)/dll/w32
 725 endif
 726 endif
 727
 728 .PHONY: installer
 729 installer: $(INSTALLER)
 730
 731 INSTDIR=/tmp/qemu-nsis
 732
 733 $(INSTALLER): $(SRC_PATH)/qemu.nsi
 734         $(MAKE) install DESTDIR=${INSTDIR}
 735 ifdef SIGNCODE
 736         (cd ${INSTDIR}/${bindir}; \
 737          for i in *.exe; do \
 738            $(SIGNCODE) $${i}; \
 739          done \
 740         )
 741 endif # SIGNCODE
 742         (cd ${INSTDIR}/${bindir}; \
 743          for i in qemu-system-*.exe; do \
 744            arch=$${i%.exe}; \
 745            arch=$${arch#qemu-system-}; \
 746            echo Section \"$$arch\" Section_$$arch; \
 747            echo SetOutPath \"\$$INSTDIR\"; \
 748            echo File \"\$${BINDIR}\\$$i\"; \
 749            echo SectionEnd; \
 750          done \
 751         ) >${INSTDIR}/${bindir}/system-emulations.nsh
 752         makensis $(nsisflags) \
 753                 $(if $(BUILD_DOCS),-DCONFIG_DOCUMENTATION="y") \
 754                 $(if $(CONFIG_GTK),-DCONFIG_GTK="y") \
 755                 -DBINDIR="${INSTDIR}/${bindir}" \
 756                 $(if $(DLL_PATH),-DDLLDIR="$(DLL_PATH)") \
 757                 -DSRCDIR="$(SRC_PATH)" \
 758                 -DOUTFILE="$(INSTALLER)" \
 759                 -DDISPLAYVERSION="$(VERSION)" \
 760                 $(SRC_PATH)/qemu.nsi
 761         rm -r ${INSTDIR}
 762 ifdef SIGNCODE
 763         $(SIGNCODE) $(INSTALLER)
 764 endif # SIGNCODE
 765 endif # CONFIG_WIN
 766
 767 # Add a dependency on the generated files, so that they are always
 768 # rebuilt before other object files
 769 ifneq ($(wildcard config-host.mak),)
 770 ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
 771 Makefile: $(generated-files-y)
 772 endif
 773 endif
 774
 775 # Include automatically generated dependency files
 776 # Dependencies in Makefile.objs files come from our recursive subdir rules
 777 -include $(wildcard *.d tests/*.d)
 778
 779 include $(SRC_PATH)/tests/docker/Makefile.include
 780 include $(SRC_PATH)/tests/vm/Makefile.include
 781
 782 print-help-run = printf "  %-30s - %s\\n" "$1" "$2"
 783 print-help = $(quiet-@)$(call print-help-run,$1,$2)
 784
 785 .PHONY: help
 786 help:
 787         @echo  'Generic targets:'
 788         $(call print-help,all,Build all)
 789 ifdef CONFIG_MODULES
 790         $(call print-help,modules,Build all modules)
 791 endif
 792         $(call print-help,dir/file.o,Build specified target only)
 793         $(call print-help,install,Install QEMU, documentation and tools)
 794         $(call print-help,ctags/TAGS,Generate tags file for editors)
 795         $(call print-help,cscope,Generate cscope index)
 796         $(call print-help,sparse,Run sparse on the QEMU source)
 797         @echo  ''
 798         @$(if $(TARGET_DIRS), \
 799                 echo 'Architecture specific targets:'; \
 800                 $(foreach t, $(TARGET_DIRS), \
 801                 $(call print-help-run,$(t)/all,Build for $(t)); \
 802                 $(if $(CONFIG_FUZZ), \
 803                         $(if $(findstring softmmu,$(t)), \
 804                                 $(call print-help-run,$(t)/fuzz,Build fuzzer for $(t)); \
 805                 ))) \
 806                 echo '')
 807         @$(if $(HELPERS-y), \
 808                 echo 'Helper targets:'; \
 809                 $(foreach t, $(HELPERS-y), \
 810                 $(call print-help-run,$(t),Build $(shell basename $(t)));) \
 811                 echo '')
 812         @$(if $(TOOLS), \
 813                 echo 'Tools targets:'; \
 814                 $(foreach t, $(TOOLS), \
 815                 $(call print-help-run,$(t),Build $(shell basename $(t)) tool);) \
 816                 echo '')
 817         @echo  'Cleaning targets:'
 818         $(call print-help,clean,Remove most generated files but keep the config)
 819         $(call print-help,distclean,Remove all generated files)
 820         $(call print-help,dist,Build a distributable tarball)
 821         @echo  ''
 822         @echo  'Test targets:'
 823         $(call print-help,check,Run all tests (check-help for details))
 824         $(call print-help,docker,Help about targets running tests inside containers)
 825         $(call print-help,vm-help,Help about targets running tests inside VM)
 826         @echo  ''
 827         @echo  'Documentation targets:'
 828         $(call print-help,html info pdf txt,Build documentation in specified format)
 829         @echo  ''
 830 ifdef CONFIG_WIN32
 831         @echo  'Windows targets:'
 832         $(call print-help,installer,Build NSIS-based installer for QEMU)
 833 ifdef QEMU_GA_MSI_ENABLED
 834         $(call print-help,msi,Build MSI-based installer for qemu-ga)
 835 endif
 836         @echo  ''
 837 endif
 838         $(call print-help,$(MAKE) [targets],(quiet build, default))
 839         $(call print-help,$(MAKE) V=1 [targets],(verbose build))