migration: Fix return code of ram_save_iterate()
[qemu/ar7.git] / hw / ide / via.c
blob5b32ecb386ebb47fde593b6593086a595822e0b6
1 /*
2 * QEMU IDE Emulation: PCI VIA82C686B support.
4 * Copyright (c) 2003 Fabrice Bellard
5 * Copyright (c) 2006 Openedhand Ltd.
6 * Copyright (c) 2010 Huacai Chen <zltjiangshi@gmail.com>
8 * Permission is hereby granted, free of charge, to any person obtaining a copy
9 * of this software and associated documentation files (the "Software"), to deal
10 * in the Software without restriction, including without limitation the rights
11 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12 * copies of the Software, and to permit persons to whom the Software is
13 * furnished to do so, subject to the following conditions:
15 * The above copyright notice and this permission notice shall be included in
16 * all copies or substantial portions of the Software.
18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
21 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 * THE SOFTWARE.
26 #include "qemu/osdep.h"
27 #include "hw/hw.h"
28 #include "hw/i386/pc.h"
29 #include "hw/pci/pci.h"
30 #include "hw/isa/isa.h"
31 #include "sysemu/block-backend.h"
32 #include "sysemu/sysemu.h"
33 #include "sysemu/dma.h"
35 #include "hw/ide/pci.h"
37 static uint64_t bmdma_read(void *opaque, hwaddr addr,
38 unsigned size)
40 BMDMAState *bm = opaque;
41 uint32_t val;
43 if (size != 1) {
44 return ((uint64_t)1 << (size * 8)) - 1;
47 switch (addr & 3) {
48 case 0:
49 val = bm->cmd;
50 break;
51 case 2:
52 val = bm->status;
53 break;
54 default:
55 val = 0xff;
56 break;
58 #ifdef DEBUG_IDE
59 printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
60 #endif
61 return val;
64 static void bmdma_write(void *opaque, hwaddr addr,
65 uint64_t val, unsigned size)
67 BMDMAState *bm = opaque;
69 if (size != 1) {
70 return;
73 #ifdef DEBUG_IDE
74 printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
75 #endif
76 switch (addr & 3) {
77 case 0:
78 bmdma_cmd_writeb(bm, val);
79 break;
80 case 2:
81 bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
82 break;
83 default:;
87 static const MemoryRegionOps via_bmdma_ops = {
88 .read = bmdma_read,
89 .write = bmdma_write,
92 static void bmdma_setup_bar(PCIIDEState *d)
94 int i;
96 memory_region_init(&d->bmdma_bar, OBJECT(d), "via-bmdma-container", 16);
97 for(i = 0;i < 2; i++) {
98 BMDMAState *bm = &d->bmdma[i];
100 memory_region_init_io(&bm->extra_io, OBJECT(d), &via_bmdma_ops, bm,
101 "via-bmdma", 4);
102 memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io);
103 memory_region_init_io(&bm->addr_ioport, OBJECT(d),
104 &bmdma_addr_ioport_ops, bm, "bmdma", 4);
105 memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport);
109 static void via_reset(void *opaque)
111 PCIIDEState *d = opaque;
112 PCIDevice *pd = PCI_DEVICE(d);
113 uint8_t *pci_conf = pd->config;
114 int i;
116 for (i = 0; i < 2; i++) {
117 ide_bus_reset(&d->bus[i]);
120 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_WAIT);
121 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
122 PCI_STATUS_DEVSEL_MEDIUM);
124 pci_set_long(pci_conf + PCI_BASE_ADDRESS_0, 0x000001f0);
125 pci_set_long(pci_conf + PCI_BASE_ADDRESS_1, 0x000003f4);
126 pci_set_long(pci_conf + PCI_BASE_ADDRESS_2, 0x00000170);
127 pci_set_long(pci_conf + PCI_BASE_ADDRESS_3, 0x00000374);
128 pci_set_long(pci_conf + PCI_BASE_ADDRESS_4, 0x0000cc01); /* BMIBA: 20-23h */
129 pci_set_long(pci_conf + PCI_INTERRUPT_LINE, 0x0000010e);
131 /* IDE chip enable, IDE configuration 1/2, IDE FIFO Configuration*/
132 pci_set_long(pci_conf + 0x40, 0x0a090600);
133 /* IDE misc configuration 1/2/3 */
134 pci_set_long(pci_conf + 0x44, 0x00c00068);
135 /* IDE Timing control */
136 pci_set_long(pci_conf + 0x48, 0xa8a8a8a8);
137 /* IDE Address Setup Time */
138 pci_set_long(pci_conf + 0x4c, 0x000000ff);
139 /* UltraDMA Extended Timing Control*/
140 pci_set_long(pci_conf + 0x50, 0x07070707);
141 /* UltraDMA FIFO Control */
142 pci_set_long(pci_conf + 0x54, 0x00000004);
143 /* IDE primary sector size */
144 pci_set_long(pci_conf + 0x60, 0x00000200);
145 /* IDE secondary sector size */
146 pci_set_long(pci_conf + 0x68, 0x00000200);
147 /* PCI PM Block */
148 pci_set_long(pci_conf + 0xc0, 0x00020001);
151 static void vt82c686b_init_ports(PCIIDEState *d) {
152 static const struct {
153 int iobase;
154 int iobase2;
155 int isairq;
156 } port_info[] = {
157 {0x1f0, 0x3f6, 14},
158 {0x170, 0x376, 15},
160 int i;
162 for (i = 0; i < 2; i++) {
163 ide_bus_new(&d->bus[i], sizeof(d->bus[i]), DEVICE(d), i, 2);
164 ide_init_ioport(&d->bus[i], NULL, port_info[i].iobase,
165 port_info[i].iobase2);
166 ide_init2(&d->bus[i], isa_get_irq(NULL, port_info[i].isairq));
168 bmdma_init(&d->bus[i], &d->bmdma[i], d);
169 d->bmdma[i].bus = &d->bus[i];
170 ide_register_restart_cb(&d->bus[i]);
174 /* via ide func */
175 static void vt82c686b_ide_realize(PCIDevice *dev, Error **errp)
177 PCIIDEState *d = PCI_IDE(dev);
178 uint8_t *pci_conf = dev->config;
180 pci_config_set_prog_interface(pci_conf, 0x8a); /* legacy ATA mode */
181 pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
183 qemu_register_reset(via_reset, d);
184 bmdma_setup_bar(d);
185 pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
187 vmstate_register(DEVICE(dev), 0, &vmstate_ide_pci, d);
189 vt82c686b_init_ports(d);
192 static void vt82c686b_ide_exitfn(PCIDevice *dev)
194 PCIIDEState *d = PCI_IDE(dev);
195 unsigned i;
197 for (i = 0; i < 2; ++i) {
198 memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io);
199 memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport);
203 void vt82c686b_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
205 PCIDevice *dev;
207 dev = pci_create_simple(bus, devfn, "via-ide");
208 pci_ide_create_devs(dev, hd_table);
211 static void via_ide_class_init(ObjectClass *klass, void *data)
213 DeviceClass *dc = DEVICE_CLASS(klass);
214 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
216 k->realize = vt82c686b_ide_realize;
217 k->exit = vt82c686b_ide_exitfn;
218 k->vendor_id = PCI_VENDOR_ID_VIA;
219 k->device_id = PCI_DEVICE_ID_VIA_IDE;
220 k->revision = 0x06;
221 k->class_id = PCI_CLASS_STORAGE_IDE;
222 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
225 static const TypeInfo via_ide_info = {
226 .name = "via-ide",
227 .parent = TYPE_PCI_IDE,
228 .class_init = via_ide_class_init,
231 static void via_ide_register_types(void)
233 type_register_static(&via_ide_info);
236 type_init(via_ide_register_types)