hw/pl061.c

   1 /*
   2  * Arm PrimeCell PL061 General Purpose IO with additional
   3  * Luminary Micro Stellaris bits.
   4  *
   5  * Copyright (c) 2007 CodeSourcery.
   6  * Written by Paul Brook
   7  *
   8  * This code is licensed under the GPL.
   9  */
  10
  11 #include "sysbus.h"
  12
  13 //#define DEBUG_PL061 1
  14
  15 #ifdef DEBUG_PL061
  16 #define DPRINTF(fmt, ...) \
  17 do { printf("pl061: " fmt , ## __VA_ARGS__); } while (0)
  18 #define BADF(fmt, ...) \
  19 do { fprintf(stderr, "pl061: error: " fmt , ## __VA_ARGS__); exit(1);} while (0)
  20 #else
  21 #define DPRINTF(fmt, ...) do {} while(0)
  22 #define BADF(fmt, ...) \
  23 do { fprintf(stderr, "pl061: error: " fmt , ## __VA_ARGS__);} while (0)
  24 #endif
  25
  26 static const uint8_t pl061_id[12] =
  27   { 0x00, 0x00, 0x00, 0x00, 0x61, 0x10, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
  28 static const uint8_t pl061_id_luminary[12] =
  29   { 0x00, 0x00, 0x00, 0x00, 0x61, 0x00, 0x18, 0x01, 0x0d, 0xf0, 0x05, 0xb1 };
  30
  31 typedef struct {
  32     SysBusDevice busdev;
  33     uint32_t locked;
  34     uint32_t data;
  35     uint32_t old_data;
  36     uint32_t dir;
  37     uint32_t isense;
  38     uint32_t ibe;
  39     uint32_t iev;
  40     uint32_t im;
  41     uint32_t istate;
  42     uint32_t afsel;
  43     uint32_t dr2r;
  44     uint32_t dr4r;
  45     uint32_t dr8r;
  46     uint32_t odr;
  47     uint32_t pur;
  48     uint32_t pdr;
  49     uint32_t slr;
  50     uint32_t den;
  51     uint32_t cr;
  52     uint32_t float_high;
  53     uint32_t amsel;
  54     qemu_irq irq;
  55     qemu_irq out[8];
  56     const unsigned char *id;
  57 } pl061_state;
  58
  59 static const VMStateDescription vmstate_pl061 = {
  60     .name = "pl061",
  61     .version_id = 2,
  62     .minimum_version_id = 1,
  63     .fields = (VMStateField[]) {
  64         VMSTATE_UINT32(locked, pl061_state),
  65         VMSTATE_UINT32(data, pl061_state),
  66         VMSTATE_UINT32(old_data, pl061_state),
  67         VMSTATE_UINT32(dir, pl061_state),
  68         VMSTATE_UINT32(isense, pl061_state),
  69         VMSTATE_UINT32(ibe, pl061_state),
  70         VMSTATE_UINT32(iev, pl061_state),
  71         VMSTATE_UINT32(im, pl061_state),
  72         VMSTATE_UINT32(istate, pl061_state),
  73         VMSTATE_UINT32(afsel, pl061_state),
  74         VMSTATE_UINT32(dr2r, pl061_state),
  75         VMSTATE_UINT32(dr4r, pl061_state),
  76         VMSTATE_UINT32(dr8r, pl061_state),
  77         VMSTATE_UINT32(odr, pl061_state),
  78         VMSTATE_UINT32(pur, pl061_state),
  79         VMSTATE_UINT32(pdr, pl061_state),
  80         VMSTATE_UINT32(slr, pl061_state),
  81         VMSTATE_UINT32(den, pl061_state),
  82         VMSTATE_UINT32(cr, pl061_state),
  83         VMSTATE_UINT32(float_high, pl061_state),
  84         VMSTATE_UINT32_V(amsel, pl061_state, 2),
  85         VMSTATE_END_OF_LIST()
  86     }
  87 };
  88
  89 static void pl061_update(pl061_state *s)
  90 {
  91     uint8_t changed;
  92     uint8_t mask;
  93     uint8_t out;
  94     int i;
  95
  96     /* Outputs float high.  */
  97     /* FIXME: This is board dependent.  */
  98     out = (s->data & s->dir) | ~s->dir;
  99     changed = s->old_data ^ out;
 100     if (!changed)
 101         return;
 102
 103     s->old_data = out;
 104     for (i = 0; i < 8; i++) {
 105         mask = 1 << i;
 106         if ((changed & mask) && s->out) {
 107             DPRINTF("Set output %d = %d\n", i, (out & mask) != 0);
 108             qemu_set_irq(s->out[i], (out & mask) != 0);
 109         }
 110     }
 111
 112     /* FIXME: Implement input interrupts.  */
 113 }
 114
 115 static uint32_t pl061_read(void *opaque, target_phys_addr_t offset)
 116 {
 117     pl061_state *s = (pl061_state *)opaque;
 118
 119     if (offset >= 0xfd0 && offset < 0x1000) {
 120         return s->id[(offset - 0xfd0) >> 2];
 121     }
 122     if (offset < 0x400) {
 123         return s->data & (offset >> 2);
 124     }
 125     switch (offset) {
 126     case 0x400: /* Direction */
 127         return s->dir;
 128     case 0x404: /* Interrupt sense */
 129         return s->isense;
 130     case 0x408: /* Interrupt both edges */
 131         return s->ibe;
 132     case 0x40c: /* Interrupt event */
 133         return s->iev;
 134     case 0x410: /* Interrupt mask */
 135         return s->im;
 136     case 0x414: /* Raw interrupt status */
 137         return s->istate;
 138     case 0x418: /* Masked interrupt status */
 139         return s->istate | s->im;
 140     case 0x420: /* Alternate function select */
 141         return s->afsel;
 142     case 0x500: /* 2mA drive */
 143         return s->dr2r;
 144     case 0x504: /* 4mA drive */
 145         return s->dr4r;
 146     case 0x508: /* 8mA drive */
 147         return s->dr8r;
 148     case 0x50c: /* Open drain */
 149         return s->odr;
 150     case 0x510: /* Pull-up */
 151         return s->pur;
 152     case 0x514: /* Pull-down */
 153         return s->pdr;
 154     case 0x518: /* Slew rate control */
 155         return s->slr;
 156     case 0x51c: /* Digital enable */
 157         return s->den;
 158     case 0x520: /* Lock */
 159         return s->locked;
 160     case 0x524: /* Commit */
 161         return s->cr;
 162     case 0x528: /* Analog mode select */
 163         return s->amsel;
 164     default:
 165         hw_error("pl061_read: Bad offset %x\n", (int)offset);
 166         return 0;
 167     }
 168 }
 169
 170 static void pl061_write(void *opaque, target_phys_addr_t offset,
 171                         uint32_t value)
 172 {
 173     pl061_state *s = (pl061_state *)opaque;
 174     uint8_t mask;
 175
 176     if (offset < 0x400) {
 177         mask = (offset >> 2) & s->dir;
 178         s->data = (s->data & ~mask) | (value & mask);
 179         pl061_update(s);
 180         return;
 181     }
 182     switch (offset) {
 183     case 0x400: /* Direction */
 184         s->dir = value & 0xff;
 185         break;
 186     case 0x404: /* Interrupt sense */
 187         s->isense = value & 0xff;
 188         break;
 189     case 0x408: /* Interrupt both edges */
 190         s->ibe = value & 0xff;
 191         break;
 192     case 0x40c: /* Interrupt event */
 193         s->iev = value & 0xff;
 194         break;
 195     case 0x410: /* Interrupt mask */
 196         s->im = value & 0xff;
 197         break;
 198     case 0x41c: /* Interrupt clear */
 199         s->istate &= ~value;
 200         break;
 201     case 0x420: /* Alternate function select */
 202         mask = s->cr;
 203         s->afsel = (s->afsel & ~mask) | (value & mask);
 204         break;
 205     case 0x500: /* 2mA drive */
 206         s->dr2r = value & 0xff;
 207         break;
 208     case 0x504: /* 4mA drive */
 209         s->dr4r = value & 0xff;
 210         break;
 211     case 0x508: /* 8mA drive */
 212         s->dr8r = value & 0xff;
 213         break;
 214     case 0x50c: /* Open drain */
 215         s->odr = value & 0xff;
 216         break;
 217     case 0x510: /* Pull-up */
 218         s->pur = value & 0xff;
 219         break;
 220     case 0x514: /* Pull-down */
 221         s->pdr = value & 0xff;
 222         break;
 223     case 0x518: /* Slew rate control */
 224         s->slr = value & 0xff;
 225         break;
 226     case 0x51c: /* Digital enable */
 227         s->den = value & 0xff;
 228         break;
 229     case 0x520: /* Lock */
 230         s->locked = (value != 0xacce551);
 231         break;
 232     case 0x524: /* Commit */
 233         if (!s->locked)
 234             s->cr = value & 0xff;
 235         break;
 236     case 0x528:
 237         s->amsel = value & 0xff;
 238         break;
 239     default:
 240         hw_error("pl061_write: Bad offset %x\n", (int)offset);
 241     }
 242     pl061_update(s);
 243 }
 244
 245 static void pl061_reset(pl061_state *s)
 246 {
 247   s->locked = 1;
 248   s->cr = 0xff;
 249 }
 250
 251 static void pl061_set_irq(void * opaque, int irq, int level)
 252 {
 253     pl061_state *s = (pl061_state *)opaque;
 254     uint8_t mask;
 255
 256     mask = 1 << irq;
 257     if ((s->dir & mask) == 0) {
 258         s->data &= ~mask;
 259         if (level)
 260             s->data |= mask;
 261         pl061_update(s);
 262     }
 263 }
 264
 265 static CPUReadMemoryFunc * const pl061_readfn[] = {
 266    pl061_read,
 267    pl061_read,
 268    pl061_read
 269 };
 270
 271 static CPUWriteMemoryFunc * const pl061_writefn[] = {
 272    pl061_write,
 273    pl061_write,
 274    pl061_write
 275 };
 276
 277 static int pl061_init(SysBusDevice *dev, const unsigned char *id)
 278 {
 279     int iomemtype;
 280     pl061_state *s = FROM_SYSBUS(pl061_state, dev);
 281     s->id = id;
 282     iomemtype = cpu_register_io_memory(pl061_readfn,
 283                                        pl061_writefn, s,
 284                                        DEVICE_NATIVE_ENDIAN);
 285     sysbus_init_mmio(dev, 0x1000, iomemtype);
 286     sysbus_init_irq(dev, &s->irq);
 287     qdev_init_gpio_in(&dev->qdev, pl061_set_irq, 8);
 288     qdev_init_gpio_out(&dev->qdev, s->out, 8);
 289     pl061_reset(s);
 290     return 0;
 291 }
 292
 293 static int pl061_init_luminary(SysBusDevice *dev)
 294 {
 295     return pl061_init(dev, pl061_id_luminary);
 296 }
 297
 298 static int pl061_init_arm(SysBusDevice *dev)
 299 {
 300     return pl061_init(dev, pl061_id);
 301 }
 302
 303 static SysBusDeviceInfo pl061_info = {
 304     .init = pl061_init_arm,
 305     .qdev.name = "pl061",
 306     .qdev.size = sizeof(pl061_state),
 307     .qdev.vmsd = &vmstate_pl061,
 308 };
 309
 310 static SysBusDeviceInfo pl061_luminary_info = {
 311     .init = pl061_init_luminary,
 312     .qdev.name = "pl061_luminary",
 313     .qdev.size = sizeof(pl061_state),
 314     .qdev.vmsd = &vmstate_pl061,
 315 };
 316
 317 static void pl061_register_devices(void)
 318 {
 319     sysbus_register_withprop(&pl061_info);
 320     sysbus_register_withprop(&pl061_luminary_info);
 321 }
 322
 323 device_init(pl061_register_devices)