hw/tpm/tpm_ioctl.h

   1 /*
   2  * tpm_ioctl.h
   3  *
   4  * (c) Copyright IBM Corporation 2014, 2015.
   5  *
   6  * This file is licensed under the terms of the 3-clause BSD license
   7  */
   8
   9 #ifndef TPM_IOCTL_H
  10 #define TPM_IOCTL_H
  11
  12 #include <sys/uio.h>
  13 #include <sys/ioctl.h>
  14
  15 /*
  16  * Every response from a command involving a TPM command execution must hold
  17  * the ptm_res as the first element.
  18  * ptm_res corresponds to the error code of a command executed by the TPM.
  19  */
  20
  21 typedef uint32_t ptm_res;
  22
  23 /* PTM_GET_TPMESTABLISHED: get the establishment bit */
  24 struct ptm_est {
  25     union {
  26         struct {
  27             ptm_res tpm_result;
  28             unsigned char bit; /* TPM established bit */
  29         } resp; /* response */
  30     } u;
  31 };
  32
  33 /* PTM_RESET_TPMESTABLISHED: reset establishment bit */
  34 struct ptm_reset_est {
  35     union {
  36         struct {
  37             uint8_t loc; /* locality to use */
  38         } req; /* request */
  39         struct {
  40             ptm_res tpm_result;
  41         } resp; /* response */
  42     } u;
  43 };
  44
  45 /* PTM_INIT */
  46 struct ptm_init {
  47     union {
  48         struct {
  49             uint32_t init_flags; /* see definitions below */
  50         } req; /* request */
  51         struct {
  52             ptm_res tpm_result;
  53         } resp; /* response */
  54     } u;
  55 };
  56
  57 /* above init_flags */
  58 #define PTM_INIT_FLAG_DELETE_VOLATILE (1 << 0)
  59     /* delete volatile state file after reading it */
  60
  61 /* PTM_SET_LOCALITY */
  62 struct ptm_loc {
  63     union {
  64         struct {
  65             uint8_t loc; /* locality to set */
  66         } req; /* request */
  67         struct {
  68             ptm_res tpm_result;
  69         } resp; /* response */
  70     } u;
  71 };
  72
  73 /* PTM_HASH_DATA: hash given data */
  74 struct ptm_hdata {
  75     union {
  76         struct {
  77             uint32_t length;
  78             uint8_t data[4096];
  79         } req; /* request */
  80         struct {
  81             ptm_res tpm_result;
  82         } resp; /* response */
  83     } u;
  84 };
  85
  86 /*
  87  * size of the TPM state blob to transfer; x86_64 can handle 8k,
  88  * ppc64le only ~7k; keep the response below a 4k page size
  89  */
  90 #define PTM_STATE_BLOB_SIZE (3 * 1024)
  91
  92 /*
  93  * The following is the data structure to get state blobs from the TPM.
  94  * If the size of the state blob exceeds the PTM_STATE_BLOB_SIZE, multiple reads
  95  * with this ioctl and with adjusted offset are necessary. All bytes
  96  * must be transferred and the transfer is done once the last byte has been
  97  * returned.
  98  * It is possible to use the read() interface for reading the data; however, the
  99  * first bytes of the state blob will be part of the response to the ioctl(); a
 100  * subsequent read() is only necessary if the total length (totlength) exceeds
 101  * the number of received bytes. seek() is not supported.
 102  */
 103 struct ptm_getstate {
 104     union {
 105         struct {
 106             uint32_t state_flags; /* may be: PTM_STATE_FLAG_DECRYPTED */
 107             uint32_t type;        /* which blob to pull */
 108             uint32_t offset;      /* offset from where to read */
 109         } req; /* request */
 110         struct {
 111             ptm_res tpm_result;
 112             uint32_t state_flags; /* may be: PTM_STATE_FLAG_ENCRYPTED */
 113             uint32_t totlength;   /* total length that will be transferred */
 114             uint32_t length;      /* number of bytes in following buffer */
 115             uint8_t  data[PTM_STATE_BLOB_SIZE];
 116         } resp; /* response */
 117     } u;
 118 };
 119
 120 /* TPM state blob types */
 121 #define PTM_BLOB_TYPE_PERMANENT  1
 122 #define PTM_BLOB_TYPE_VOLATILE   2
 123 #define PTM_BLOB_TYPE_SAVESTATE  3
 124
 125 /* state_flags above : */
 126 #define PTM_STATE_FLAG_DECRYPTED     1 /* on input:  get decrypted state */
 127 #define PTM_STATE_FLAG_ENCRYPTED     2 /* on output: state is encrypted */
 128
 129 /*
 130  * The following is the data structure to set state blobs in the TPM.
 131  * If the size of the state blob exceeds the PTM_STATE_BLOB_SIZE, multiple
 132  * 'writes' using this ioctl are necessary. The last packet is indicated
 133  * by the length being smaller than the PTM_STATE_BLOB_SIZE.
 134  * The very first packet may have a length indicator of '0' enabling
 135  * a write() with all the bytes from a buffer. If the write() interface
 136  * is used, a final ioctl with a non-full buffer must be made to indicate
 137  * that all data were transferred (a write with 0 bytes would not work).
 138  */
 139 struct ptm_setstate {
 140     union {
 141         struct {
 142             uint32_t state_flags; /* may be PTM_STATE_FLAG_ENCRYPTED */
 143             uint32_t type;        /* which blob to set */
 144             uint32_t length;      /* length of the data;
 145                                      use 0 on the first packet to
 146                                      transfer using write() */
 147             uint8_t data[PTM_STATE_BLOB_SIZE];
 148         } req; /* request */
 149         struct {
 150             ptm_res tpm_result;
 151         } resp; /* response */
 152     } u;
 153 };
 154
 155 /*
 156  * PTM_GET_CONFIG: Data structure to get runtime configuration information
 157  * such as which keys are applied.
 158  */
 159 struct ptm_getconfig {
 160     union {
 161         struct {
 162             ptm_res tpm_result;
 163             uint32_t flags;
 164         } resp; /* response */
 165     } u;
 166 };
 167
 168 #define PTM_CONFIG_FLAG_FILE_KEY        0x1
 169 #define PTM_CONFIG_FLAG_MIGRATION_KEY   0x2
 170
 171 /*
 172  * PTM_SET_BUFFERSIZE: Set the buffer size to be used by the TPM.
 173  * A 0 on input queries for the current buffer size. Any other
 174  * number will try to set the buffer size. The returned number is
 175  * the buffer size that will be used, which can be larger than the
 176  * requested one, if it was below the minimum, or smaller than the
 177  * requested one, if it was above the maximum.
 178  */
 179 struct ptm_setbuffersize {
 180     union {
 181         struct {
 182             uint32_t buffersize; /* 0 to query for current buffer size */
 183         } req; /* request */
 184         struct {
 185             ptm_res tpm_result;
 186             uint32_t buffersize; /* buffer size in use */
 187             uint32_t minsize; /* min. supported buffer size */
 188             uint32_t maxsize; /* max. supported buffer size */
 189         } resp; /* response */
 190     } u;
 191 };
 192
 193
 194 typedef uint64_t ptm_cap;
 195 typedef struct ptm_est ptm_est;
 196 typedef struct ptm_reset_est ptm_reset_est;
 197 typedef struct ptm_loc ptm_loc;
 198 typedef struct ptm_hdata ptm_hdata;
 199 typedef struct ptm_init ptm_init;
 200 typedef struct ptm_getstate ptm_getstate;
 201 typedef struct ptm_setstate ptm_setstate;
 202 typedef struct ptm_getconfig ptm_getconfig;
 203 typedef struct ptm_setbuffersize ptm_setbuffersize;
 204
 205 /* capability flags returned by PTM_GET_CAPABILITY */
 206 #define PTM_CAP_INIT               (1)
 207 #define PTM_CAP_SHUTDOWN           (1 << 1)
 208 #define PTM_CAP_GET_TPMESTABLISHED (1 << 2)
 209 #define PTM_CAP_SET_LOCALITY       (1 << 3)
 210 #define PTM_CAP_HASHING            (1 << 4)
 211 #define PTM_CAP_CANCEL_TPM_CMD     (1 << 5)
 212 #define PTM_CAP_STORE_VOLATILE     (1 << 6)
 213 #define PTM_CAP_RESET_TPMESTABLISHED (1 << 7)
 214 #define PTM_CAP_GET_STATEBLOB      (1 << 8)
 215 #define PTM_CAP_SET_STATEBLOB      (1 << 9)
 216 #define PTM_CAP_STOP               (1 << 10)
 217 #define PTM_CAP_GET_CONFIG         (1 << 11)
 218 #define PTM_CAP_SET_DATAFD         (1 << 12)
 219 #define PTM_CAP_SET_BUFFERSIZE     (1 << 13)
 220
 221 enum {
 222     PTM_GET_CAPABILITY     = _IOR('P', 0, ptm_cap),
 223     PTM_INIT               = _IOWR('P', 1, ptm_init),
 224     PTM_SHUTDOWN           = _IOR('P', 2, ptm_res),
 225     PTM_GET_TPMESTABLISHED = _IOR('P', 3, ptm_est),
 226     PTM_SET_LOCALITY       = _IOWR('P', 4, ptm_loc),
 227     PTM_HASH_START         = _IOR('P', 5, ptm_res),
 228     PTM_HASH_DATA          = _IOWR('P', 6, ptm_hdata),
 229     PTM_HASH_END           = _IOR('P', 7, ptm_res),
 230     PTM_CANCEL_TPM_CMD     = _IOR('P', 8, ptm_res),
 231     PTM_STORE_VOLATILE     = _IOR('P', 9, ptm_res),
 232     PTM_RESET_TPMESTABLISHED = _IOWR('P', 10, ptm_reset_est),
 233     PTM_GET_STATEBLOB      = _IOWR('P', 11, ptm_getstate),
 234     PTM_SET_STATEBLOB      = _IOWR('P', 12, ptm_setstate),
 235     PTM_STOP               = _IOR('P', 13, ptm_res),
 236     PTM_GET_CONFIG         = _IOR('P', 14, ptm_getconfig),
 237     PTM_SET_DATAFD         = _IOR('P', 15, ptm_res),
 238     PTM_SET_BUFFERSIZE     = _IOWR('P', 16, ptm_setbuffersize),
 239 };
 240
 241 /*
 242  * Commands used by the non-CUSE TPMs
 243  *
 244  * All messages container big-endian data.
 245  *
 246  * The return messages only contain the 'resp' part of the unions
 247  * in the data structures above. Besides that the limits in the
 248  * buffers above (ptm_hdata:u.req.data and ptm_get_state:u.resp.data
 249  * and ptm_set_state:u.req.data) are 0xffffffff.
 250  */
 251 enum {
 252     CMD_GET_CAPABILITY = 1,
 253     CMD_INIT,
 254     CMD_SHUTDOWN,
 255     CMD_GET_TPMESTABLISHED,
 256     CMD_SET_LOCALITY,
 257     CMD_HASH_START,
 258     CMD_HASH_DATA,
 259     CMD_HASH_END,
 260     CMD_CANCEL_TPM_CMD,
 261     CMD_STORE_VOLATILE,
 262     CMD_RESET_TPMESTABLISHED,
 263     CMD_GET_STATEBLOB,
 264     CMD_SET_STATEBLOB,
 265     CMD_STOP,
 266     CMD_GET_CONFIG,
 267     CMD_SET_DATAFD,
 268     CMD_SET_BUFFERSIZE,
 269 };
 270
 271 #endif /* TPM_IOCTL_H */